PRVT-PW-TDM-MIB
113 objects
This MIB contains managed object definitions for encapsulating TDM (T1,E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN).
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| PRVT-SWITCH-MIB | switch |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.5.200 | NodeprvtPwVc | |||
| 1.3.6.1.4.1.738.1.5.200.2 | IdentityprvtPwVcTDMMIB | This MIB contains managed object definitions for encapsulating TDM (T1,E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN). | ||
| 1.3.6.1.4.1.738.1.5.200.2.1 | NodeprvtPwVcTDMObjects | |||
| 1.3.6.1.4.1.738.1.5.200.2.1.1 | TableprvtPwVcTDMTable | not-accessible | current | This table contains basic information including ifIndex, and pointers to entries in the relevant TDM config tables for this TDM PW. |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1 | RowprvtPwVcTDMEntry | not-accessible | current | This table is indexed by the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB). An entry is created in this table by the… |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.1 | ColumnprvtPwVcTDMModuleId | read-only | current | The ID of the CES Module where the crcuit is configured. |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.2 | ColumnprvtPwVcTDMCircuitId | read-only | current | The ID of the CES Circuit that this PW represents. |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.3 | ColumnprvtPwVcTDMType | read-only | current | Specifies the type of TDM PW. The connection assumed to be symmetrical having the same value at both ends. To identify structured vs. unstructured type for DS1… |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.4 | ColumnprvtPwVcRelTDMCfgIndex | read-only | current | Index to the relevant TDM configuration table entry that appears in one of the related MIB modules such as SAToP,TDMoIP or CESoPSN. It is likely that multiple … |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.5 | ColumnprvtPwVcTDMTimeElapsed | read-only | current | The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adju… |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.6 | ColumnprvtPwVcTDMValidIntervals | read-only | current | The number of previous 15-minute intervals for which data was collected. An agent with TDM capability must be capable of supporting at least n intervals. The m… |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.7 | ColumnprvtPwVcTDMCurrentIndications | read-only | current | The following defects should be detected and reported upon request: -Stray packets MAY be detected by the PSN and multiplexing layers. Stray packets MUST be di… |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.8 | ColumnprvtPwVcTDMLatchedIndications | read-only | current | The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS) condition. At this time, onl… |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.9 | ColumnprvtPwVcTDMLastEsTimeStamp | read-only | current | The value of sysUpTime on the most recent occasion at which the TDM PW entered the ES or SES state. |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.10 | ColumnprvtPwVcTDMEmulationMode | read-only | current | The circuit emulation mode. |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.11 | ColumnprvtPwVcTDMOperStatus | read-only | current | The operational status of the circuit. |
| 1.3.6.1.4.1.738.1.5.200.2.1.1.1.12 | ColumnprvtPwVcTDMClearCircuitStatistics | read-write | current | Clear circuit statistics. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3 | TableprvtPwVcTDMCfgTable | not-accessible | current | This table contains a set of parameters that may be referenced by one or more TDM PWs in prvtPwVcTDMTable. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1 | RowprvtPwVcTDMCfgEntry | not-accessible | current | These parameters define the characteristics of a TDM PW. They are grouped here to ease NMS burden. Once an entry is created here it may be re-used by many PWs. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.1 | ColumnprvtPwVcTDMCfgPayloadSize | read-create | current | The value of this object indicates the PayLoad Size to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of data.… |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.2 | ColumnprvtPwVcTDMCfgPktReorder | read-create | current | If set True: as CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the rang… |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.3 | ColumnprvtPwVcTDMCfgRtpHdrUsed | read-create | current | If set False: an RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.4 | ColumnprvtPwVcTDMCfgJtrBfrDepth | read-create | current | The size of the Jitter buffer SHOULD be defined to a value that is capable to allow accommodation to the PSN-specific packet delay variation. If configured to … |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.5 | ColumnprvtPwVcTDMCfgChannelGroup | read-create | current | The circuit's channel group. This object is only valid if structured emulation mode is used. If a group is not set the value of the object is 0. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.6 | ColumnprvtPwVcTDMCfgPorts | read-create | current | A bitmap of themodule's TDM ports belongng to the circuit. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.7 | ColumnprvtPwVcTDMCfgPeerIpType | read-create | current | The type of the peer's IP address. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.8 | ColumnprvtPwVcTDMCfgPeerIpAddress | read-create | current | The peer's IP address. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.9 | ColumnprvtPwVcTDMCfgPeerPort | read-create | current | The connection port. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.10 | ColumnprvtPwVcTDMCfgPeerMAC | read-create | current | The Peer MAC address. This object is only valid for Metro-Ethernet and Mpls circuits. If an IP address is configured for the circuit, this object will display … |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.11 | ColumnprvtPwVcTDMCfgPeerEcid | read-create | current | The peer circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.12 | ColumnprvtPwVcTDMCfgPeerOosEcid | read-create | current | The peer circuit identifier for the out-of-band signaling. This value is valid only when the object prvtPwVcTDMCfgEcid is set and when the current protocol is … |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.13 | ColumnprvtPwVcTDMCfgVlanId | read-create | current | The circuit Vlan ID. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.14 | ColumnprvtPwVcTDMCfgVlanPrio | read-create | current | The prioirty for the VLAN set here, when the protocol for the circuit is metro-ethernet |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.15 | ColumnprvtPwVcTDMCfgLocalPort | read-create | current | Local UDP port. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.16 | ColumnprvtPwVcTDMCfgEcid | read-create | current | The local circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.17 | ColumnprvtPwVcTDMCfgOosEcid | read-create | current | The local circuit identifier for the out-of-band signaling. This value is valid only when the object prvtPwVcTDMCfgEcid is set and when the current protocol is… |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.18 | ColumnprvtPwVcTDMCfgProtocol | read-create | current | The emulation protocol. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.19 | ColumnprvtPwVcTDMCfgAdminStatus | read-create | current | The administrative status of the circuit. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.20 | ColumnprvtPwVcTDMCfgRowStatus | read-create | current | This field is used to create and destroy TDM circuits. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.21 | ColumnprvtPwVcTDMCfgRtp | read-create | current | TRTP header. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.22 | ColumnprvtPwVcTDMCfgOosPort | read-create | current | Oos port. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.23 | ColumnprvtPwVcTDMCfgPayloadSuppression | read-create | current | Controls payload suppression. Object does not require module to be restarted. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.24 | ColumnprvtPwVcTDMCfgInterface | read-create | current | Interface used for configuring OC3 TDM circuits P - Port Number, K,L,M standard numbering of SONET/SDH. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.25 | ColumnprvtPwVcTDMCfgIpTos | read-create | current | Set/Show IP TOS information |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.26 | ColumnprvtPwVcTDMCfgIpOosTos | read-create | current | Set/Show IP Out Of Stream information |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.27 | ColumnprvtPwVcTDMCfgPeerOosPort | read-create | current | This field is used to SET Destination Oos Port |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.28 | ColumnprvtPwVcTDMCfgMplsLocalLabel | read-create | current | The local circuit identifier. This object is only valid if the Circuit protocol is MPLS |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.29 | ColumnprvtPwVcTDMCfgMplsPeerLabel | read-create | current | The peer circuit identifier. This object is only valid if the Circuit protocol is MPLS |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.30 | ColumnprvtPwVcTDMCfgMplsTTL | read-create | current | MPLS TTL |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.31 | ColumnprvtPwVcTDMCfgMplsExp | read-create | current | MPLS EXP |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.32 | ColumnprvtPwVcTDMCfgMplsOosLocalLabel | read-create | current | The local circuit identifier for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.33 | ColumnprvtPwVcTDMCfgMplsOosPeerLabel | read-create | current | The peer circuit identifier for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.34 | ColumnprvtPwVcTDMCfgMplsOosTTL | read-create | current | MPLS TTL for the out-of-band signaling. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.35 | ColumnprvtPwVcTDMCfgMplsOosExp | read-create | current | MPLS EXP for the out-of-band signaling. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.36 | ColumnprvtPwVcTDMCfgRtpOosPayload | read-create | current | This field is used to SET RTP Oos payload type. |
| 1.3.6.1.4.1.738.1.5.200.2.1.3.1.37 | ColumnprvtPwVcTDMCfgRtpPayload | read-create | current | This field is used to SET RTP payload type. |
| 1.3.6.1.4.1.738.1.5.200.2.1.4 | TableprvtTDMChannelGrpTable | not-accessible | current | This table contains the set of available channel groups. |
| 1.3.6.1.4.1.738.1.5.200.2.1.4.1 | RowprvtTDMChannelGrpEntry | not-accessible | current | These parameters are used to configure a CES channel group. |
| 1.3.6.1.4.1.738.1.5.200.2.1.4.1.1 | ColumnprvtTDMChannelGrpModuleID | read-only | current | The index of the module to which this channel group belongs. |
| 1.3.6.1.4.1.738.1.5.200.2.1.4.1.2 | ColumnprvtTDMChannelGrpID | read-only | current | The channel group ID. |
| 1.3.6.1.4.1.738.1.5.200.2.1.4.1.3 | ColumnprvtTDMChannelGrpCfgError | read-only | current | This object displays the correctness of the configuration. If it has a value of channelGroupAtached(1) this channel group has been attached to a circuit and th… |
| 1.3.6.1.4.1.738.1.5.200.2.1.4.1.4 | ColumnprvtTDMChannelGrpTimeSlots | read-write | current | This object is used to configure which time slots are members of the given channel group. |
| 1.3.6.1.4.1.738.1.5.200.2.1.4.1.5 | ColumnprvtTDMChannelGrpOC3TimeSlots | read-write | current | This object is used to configure interface and time slots for the given channel group in OC3 module. |
| 1.3.6.1.4.1.738.1.5.200.2.1.5 | TableprvtPwVcTDMPerfCurrentTable | not-accessible | current | The current 15 minute interval counts are in this table. This table provides per TDM PW performance information. |
| 1.3.6.1.4.1.738.1.5.200.2.1.5.1 | RowprvtPwVcTDMPerfCurrentEntry | not-accessible | current | An entry in this table is created by the agent for every prvtPwVcTDM entry. After 15 minutes, the contents of this table entry are copied to a new entry in the… |
| 1.3.6.1.4.1.738.1.5.200.2.1.5.1.1 | ColumnprvtPwVcTDMPerfCurrentPktsOoseq | read-only | current | Number of packets detected out of sequence (via TDM header sequence numbers), but successfully re-ordered. Note: some implementations may not support this Feat… |
| 1.3.6.1.4.1.738.1.5.200.2.1.5.1.2 | ColumnprvtPwVcTDMPerfCurrentJtrBfrUnderruns | read-only | current | Number of times a packet needed to be played out and the jitter buffer was empty. |
| 1.3.6.1.4.1.738.1.5.200.2.1.5.1.3 | ColumnprvtPwVcTDMPerfCurrentJtrBfrOverruns | read-only | current | Number of packets detected out of range (via TDM header sequence numbers), and could not be re- ordered, or could not fit in the jitter buffer. |
| 1.3.6.1.4.1.738.1.5.200.2.1.5.1.4 | ColumnprvtPwVcTDMPerfCurrentMalformedPkt | read-only | current | Number of packets detected with unexpected size, or bad headers' stack |
| 1.3.6.1.4.1.738.1.5.200.2.1.5.1.5 | ColumnprvtPwVcTDMPerfCurrentNearEndFC | read-only | current | Number of local packet failures. |
| 1.3.6.1.4.1.738.1.5.200.2.1.5.1.6 | ColumnprvtPwVcTDMPerfCurrentFarEndFC | read-only | current | Number of remote packet failures. |
| 1.3.6.1.4.1.738.1.5.200.2.1.6 | TableprvtPwVcTDMPerfIntervalTable | not-accessible | current | This table provides performance information per TDM PW similar to the prvtPwVcTDMPerfCurrentTable above. However, these counts represent historical 15 minute i… |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1 | RowprvtPwVcTDMPerfIntervalEntry | not-accessible | current | An entry in this table is created by the agent for every prvtPwVcTDMPerfCurrentEntry that is 15 minutes old. The contents of the Current entry are copied to th… |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1.1 | ColumnprvtPwVcTDMPerfIntervalNumber | not-accessible | current | A number (normally between 1 and 96 to cover a 24 hour period) which identifies the interval for which the set of statistics is available. The interval identif… |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1.2 | ColumnprvtPwVcTDMPerfIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1.3 | ColumnprvtPwVcTDMPerfIntervalDuration | read-only | current | The duration of a particular interval in seconds, Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than, the normal … |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1.4 | ColumnprvtPwVcTDMPerfIntervalPktsOoseq | read-only | current | Number of packets detected out of sequence (via TDM header sequence numbers), but successfully re-ordered. Note: some implementations mat not support this feat… |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1.5 | ColumnprvtPwVcTDMPerfIntervalJtrBfrUnderruns | read-only | current | Number of times a packet needed to be played out and the jitter buffer was empty. |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1.6 | ColumnprvtPwVcTDMPerfIntervalJtrBfrOverruns | read-only | current | Number of packets detected out of range (via TDM header sequence numbers), and could not be re- ordered, or could not fit in the jitter buffer. |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1.7 | ColumnprvtPwVcTDMPerfIntervalMalformedPkt | read-only | current | Number of packets detected with unexpected size, or bad headers' stack |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1.8 | ColumnprvtPwVcTDMPerfIntervalNearEndFC | read-only | current | Number of local packet failures. |
| 1.3.6.1.4.1.738.1.5.200.2.1.6.1.9 | ColumnprvtPwVcTDMPerfIntervalFarEndFC | read-only | current | Number of remote packet failures. |
| 1.3.6.1.4.1.738.1.5.200.2.1.7 | TableprvtPwVcTDMPerfTable | not-accessible | current | This table provides performance information per TDM PW similar to the prvtPwVcTDMPerfIntervalTable above. However, these counters represent complete historical… |
| 1.3.6.1.4.1.738.1.5.200.2.1.7.1 | RowprvtPwVcTDMPerfEntry | not-accessible | current | An entry is created in this table by the agent for every entry in the prvtPwVcTDM table. |
| 1.3.6.1.4.1.738.1.5.200.2.1.7.1.1 | ColumnprvtPwVcTDMPerfPktsOoseq | read-only | current | Number of packets detected out of sequence (via TDM header sequence numbers), but successfully re-ordered. Note: some implementations may not support this feat… |
| 1.3.6.1.4.1.738.1.5.200.2.1.7.1.2 | ColumnprvtPwVcTDMPerfJtrBfrUnderruns | read-only | current | Number of times a packet needed to be played out and the jitter buffer was empty. |
| 1.3.6.1.4.1.738.1.5.200.2.1.7.1.3 | ColumnprvtPwVcTDMPerfJtrBfrOverruns | read-only | current | Number of packets detected out of range (via TDM header sequence numbers), and could not be re- ordered, or could not fit in the jitter buffer. |
| 1.3.6.1.4.1.738.1.5.200.2.1.7.1.4 | ColumnprvtPwVcTDMPerfMalformedPkt | read-only | current | Number of packets detected with unexpected size, or bad headers' stack. |
| 1.3.6.1.4.1.738.1.5.200.2.1.7.1.5 | ColumnprvtPwVcTDMPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 suffered a discontinuity. If no such discontinuities ha… |
| 1.3.6.1.4.1.738.1.5.200.2.1.7.1.6 | ColumnprvtPwVcTDMPerfNearEndFC | read-only | current | Number of local packet failures. |
| 1.3.6.1.4.1.738.1.5.200.2.1.7.1.7 | ColumnprvtPwVcTDMPerfFarEndFC | read-only | current | Number of remote packet failures. |
| 1.3.6.1.4.1.738.1.5.200.2.1.8 | TableprvtPwVcTDMAlarmTable | not-accessible | current | This table contains object for configuring and displaying CES Circuits TCA thresholds. |
| 1.3.6.1.4.1.738.1.5.200.2.1.8.1 | RowprvtPwVcTDMAlarmEntry | not-accessible | current | |
| 1.3.6.1.4.1.738.1.5.200.2.1.8.1.1 | ColumnprvtPwVcTDMAlarmIndex | not-accessible | current | An integer uniquely identifying an alarm entry. |
| 1.3.6.1.4.1.738.1.5.200.2.1.8.1.2 | ColumnprvtPwVcTDMAlarmVariable | read-only | current | The OID of the variable whose value is being monitored. Depending on the time interval, the error condition and the modue and circuit ID, this points to an obj… |
| 1.3.6.1.4.1.738.1.5.200.2.1.8.1.3 | ColumnprvtPwVcTDMAlarmThreshold | read-write | current | The alarm condition threshold for this alarm entry. The alarm is triggered if the value of the object pointed by prvtPwVcTDMAlarmVariable remains above this th… |
| 1.3.6.1.4.1.738.1.5.200.2.1.8.1.4 | ColumnprvtPwVcTDMAlarmValue | accessible-for-notify | current | The value of the object pointed to by prvtPwVcTDMAlarmVariable, present for notification purposes. |
| 1.3.6.1.4.1.738.1.5.200.2.2 | NodeprvtPwVcTDMTraps | |||
| 1.3.6.1.4.1.738.1.5.200.2.2.1 | NotificationprvtPwVcTDMAlarm | current | This notification is sent when the value of a TDM port error condition statistic has exceeded the configured threshold, or the value has dropped back below the… | |
| 1.3.6.1.4.1.738.1.5.200.2.2.2 | NotificationprvtPwVcTDMStatusChange | current | This notification is sent when the operational or administrative status of circuit changes. | |
| 1.3.6.1.4.1.738.1.5.200.2.3 | NodeprvtPwVcTDMConformance | |||
| 1.3.6.1.4.1.738.1.5.200.2.3.1 | NodeprvtPwVcTDMGroups | |||
| 1.3.6.1.4.1.738.1.5.200.2.3.1.1 | GroupprvtPwVcTDMGroup | current | Collection of objects for basic TDM PW config and status. | |
| 1.3.6.1.4.1.738.1.5.200.2.3.1.2 | GroupprvtPwVcTDMPerfCurrentGroup | current | Collection of current statistics objects for TDM PWs. | |
| 1.3.6.1.4.1.738.1.5.200.2.3.1.3 | GroupprvtPwVcTDMPerfIntervalGroup | current | Collection of Interval statistics objects for TDM PWs. | |
| 1.3.6.1.4.1.738.1.5.200.2.3.1.4 | GroupprvtPwVcTDMPerfGroup | current | Collection of running statistics objects for TDM PWs. | |
| 1.3.6.1.4.1.738.1.5.200.2.3.1.5 | GroupprvtPwVcTDMNotificationsGroup | current | The group of supported notifications. | |
| 1.3.6.1.4.1.738.1.5.200.2.3.2 | NodeprvtPwVcTDMCompliances | |||
| 1.3.6.1.4.1.738.1.5.200.2.3.2.1 | ComplianceprvtPwTDMModuleCompliance | read-only | current | The compliance statement for agent that support PW over TDM PSN operation. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InterfaceTimeSlot | OCTET STRING | current | The first 4 octets of this value represent the interface of the given channel group P.K.L.M.The last 32 bits of the 4 octets represent a bitmask of the time slots |
| PrvtPwVcTDMCfgIndex | Unsigned32 | current | Index into any of the relevant prvtPwVcXXXCfgTable. |
| PrvtPwVcTDMCfgInterface | IpAddress | current | Interface of the given circuit used in TDM config for OC3 modules |
| TimeSlotList | OCTET STRING | current | Each octet within this value specifies a time slot included in the give channel group. There should be 32 bits of 4 octets for each port of the CES module. Note that if the line type is set to T1 only the first 24 bits … |