PRVT-SAA-MIB
181 objects
This MIB provides the extended capability of controlling and provisioning various OAM tests and SAA monitoring. It adds extra functionality for DISMAN-PING-MIB
Imported Objects
| PRVT-SWITCH-MIB | switch |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.5.130 | IdentityprvtSaaMib | This MIB provides the extended capability of controlling and provisioning various OAM tests and SAA monitoring. It adds extra functionality for DISMAN-PING-MIB | ||
| 1.3.6.1.4.1.738.1.5.130.0 | NodeprvtSaaNotifications | |||
| 1.3.6.1.4.1.738.1.5.130.0.1 | NotificationprvtSaaRFC2544ProbeFailed | current | This trap should be sent whenever a SAA probe on a specific test fails. | |
| 1.3.6.1.4.1.738.1.5.130.0.2 | NotificationprvtSaaRFC2544ProbeSuccess | current | This trap should be sent whenever a SAA probe on a specific test finishes with success. | |
| 1.3.6.1.4.1.738.1.5.130.0.3 | NotificationprvtSaaRFC2544TestFinished | current | This trap should be sent whenever a SAA RFC2544 test is finished | |
| 1.3.6.1.4.1.738.1.5.130.0.4 | NotificationprvtSaaY1731DelayNEThreshold | current | This trap should be sent whenever the near end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds. | |
| 1.3.6.1.4.1.738.1.5.130.0.5 | NotificationprvtSaaY1731DelayFEThreshold | current | This trap should be sent whenever the far end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds. | |
| 1.3.6.1.4.1.738.1.5.130.0.6 | NotificationprvtSaaY1731JitterNEThreshold | current | This trap should be sent whenever the near end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds. | |
| 1.3.6.1.4.1.738.1.5.130.0.7 | NotificationprvtSaaY1731JitterFEThreshold | current | This trap should be sent whenever the far end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds. | |
| 1.3.6.1.4.1.738.1.5.130.0.8 | NotificationprvtSaaY1731FrLossNEThreshold | current | This trap should be sent whenever the near end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds. | |
| 1.3.6.1.4.1.738.1.5.130.0.9 | NotificationprvtSaaY1731FrLossFEThreshold | current | This trap should be sent whenever the far end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds. | |
| 1.3.6.1.4.1.738.1.5.130.1 | NodeprvtSaaObjects | |||
| 1.3.6.1.4.1.738.1.5.130.1.1 | NodeprvtSaaTest | |||
| 1.3.6.1.4.1.738.1.5.130.1.1.1 | TableprvtSaaY1731PmTestTable | not-accessible | current | This table holds the configuration for a SAA Y1731 test |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1 | RowprvtSaaY1731PmTestEntry | not-accessible | current | NONE |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.1 | ColumnprvtSaaY1731PmTestOwner | not-accessible | current | This string is used to describe the owner of the Y1731 Pm SAA test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.2 | ColumnprvtSaaY1731PmTestName | not-accessible | current | This string is used to describe the test name for the Y1731 Pm SAA test. It is also used as a test identifier. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.3 | ColumnprvtSaaY1731PmTestType | read-write | current | SAA Y1731 Pm test type. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.4 | ColumnprvtSaaY1731PmTestExecStatus | read-only | current | SAA Y1731 Pm test execution status. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.5 | ColumnprvtSaaY1731PmTestEncapType | read-write | current | SAA Y1731 Pm test encapsulation type. It can be either test over VLAN or test over Service. The value 1 is the default value representing that neither type is … |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.6 | ColumnprvtSaaY1731PmTestEncapValue | read-write | current | The value of the defined SAA Y1731 Pm test encapsulation. It should be either the Vlan ID or the Service ID, depending on the type set in prvtSaaY1731PmTestEnc… |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.7 | ColumnprvtSaaY1731PmTestUserPort | read-write | current | For SAA Y1731 Pm test, this leaf is used only in case the encapsulation is VLAN type and it determines the port on which the user is connected. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.8 | ColumnprvtSaaY1731PmTestUplinkPort | read-write | current | For SAA Y1731 Pm test, this leaf is used only in case the encapsulation is VLAN type and it determines the port that the SAA test devices are connected through. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.9 | ColumnprvtSaaY1731PmTestTargetMac | read-write | current | The target MAC address for the SAA Y1731 test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.10 | ColumnprvtSaaY1731PmTestCfmDomainLevel | read-write | current | CFM Domain level on which the test will be run. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.11 | ColumnprvtSaaY1731PmTestRemoteCfmMep | read-write | current | The remote MEP associated with target MAC. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.12 | ColumnprvtSaaY1731PmTestProfile | read-write | current | The profile ID associated to the SAA Y1731 Pm test. A value of 0 depicts no set profile. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.13 | ColumnprvtSaaY1731PmTestHistoryDepth | read-write | current | Probe history count. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.14 | ColumnprvtSaaY1731PmTestPeriod | read-write | current | The period the SAA Y1731 Pm test will run, in milliseconds. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.15 | ColumnprvtSaaY1731PmTestTimeout | read-write | current | The timeout period for a test packet. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.16 | ColumnprvtSaaY1731PmTestMonitorInterval | read-write | current | Monitoring interval is relevant only for continous Y1731 test. It is measured in minutes. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.17 | ColumnprvtSaaY1731PmTestFrequency | read-write | current | The time between two consecutive intervals. A value of 1 defines a delay of a second between the end of the first and the begining of the next interval. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.18 | ColumnprvtSaaY1731PmTestClocksInSync | read-write | current | This variable tells if the clocks of the test are syncronized. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.19 | ColumnprvtSaaY1731PmTestDelayMethod | read-write | current | Defines the method of calculating delay on a Y1731 test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.20 | ColumnprvtSaaY1731PmTestDelayPvalue | read-write | current | Percent used to calculate delay in p-percentile method. Reported delay is the percent-th member in the array with sorted delays. Relevant only for p-percentile… |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.21 | ColumnprvtSaaY1731PmTestJitterMethod | read-write | current | Defines the method of calculating jitter on a Y1731 test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.22 | ColumnprvtSaaY1731PmTestJitterPvalue | read-write | current | Percent used to calculate jitter in p-percentile method. Reported jitter is the percent-th member in the array with sorted jitters. Relevant only for p-percent… |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.23 | ColumnprvtSaaY1731PmTestPriority | read-write | current | Defines the priority of the packets sent by the SAA Y1731 Pm test (priority to count user traffic). |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.24 | ColumnprvtSaaY1731PmTestRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activ… |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.25 | ColumnprvtSaaY1731PmTestCCMAPSCount | read-write | current | Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.26 | ColumnprvtSaaY1731PmTestLossMeasurementType | read-write | current | If set to 1 Synthetic Loss Measurement will be used for frame-loss calculations.If set 0 user packets will be used for frame-loss calculations |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.27 | ColumnprvtSaaY1731PmTestSLMTransmit | read-write | current | If set true the device is capable of sending SLM packets and frame-loss calculations. This must be used only when loss measurement type is SLM |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.28 | ColumnprvtSaaY1731PmTestTestId | read-write | current | Specify the unique test id used in Y1731 SLM. 0 means not set.It is mandatory for the Y1731 SLM test |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.29 | ColumnprvtSaaY1731PmTestDropEligible | read-write | current | Drop Eligible flag for S-VLAN used for the Y1731 SLM test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.30 | ColumnprvtSaaY1731PmTestDataSize | read-write | current | Packet sizes for Y1731 SLM test |
| 1.3.6.1.4.1.738.1.5.130.1.1.1.1.31 | ColumnprvtSaaY1731PmTestCountAllPriorities | read-write | current | Measure for all priorities. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2 | TableprvtSaaRFC2544ThroughputTestTable | not-accessible | current | This table holds the configuration for a SAA RFC2544 test |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1 | RowprvtSaaRFC2544ThroughputTestEntry | not-accessible | current | NONE |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.1 | ColumnprvtSaaRFC2544ThroughputTestOwner | not-accessible | current | This string is used to describe the owner of the RFC2544 SAA test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.2 | ColumnprvtSaaRFC2544ThroughputTestName | not-accessible | current | This string is used to describe the test name for the RFC2544 SAA test. It is also used as a test identifier. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.3 | ColumnprvtSaaRFC2544ThroughputTestType | read-write | current | SAA RFC2544 Throughput test type |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.4 | ColumnprvtSaaRFC2544ThroughputTestExecStatus | read-only | current | SAA RFC2544 Throughput test execution status. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.5 | ColumnprvtSaaRFC2544ThroughputTestSourceType | read-only | current | SAA RFC2544 Throughput test source type. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.6 | ColumnprvtSaaRFC2544ThroughputTestSource | read-create | current | String that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the value… |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.7 | ColumnprvtSaaRFC2544ThroughputTestTargetType | read-only | current | SAA RFC2544 Throughput test target type. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.8 | ColumnprvtSaaRFC2544ThroughputTestTarget | read-create | current | String that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the value… |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.9 | ColumnprvtSaaRFC2544ThroughputTestTimeout | read-write | current | SAA RFC2544 Throughput test timeout, in 0.1 of a second increments |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.10 | ColumnprvtSaaRFC2544ThroughputTestCIR | read-write | current | SAA RFC2544 Throughput Committed Information Rate (CIR) value. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.11 | ColumnprvtSaaRFC2544ThroughputTestCBS | read-write | current | SAA RFC2544 Throughput Committed Burst Size (CBS) value. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.12 | ColumnprvtSaaRFC2544ThroughputTestBurstPercentage | read-write | current | Part of CIR to use for bursts(CBS). |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.13 | ColumnprvtSaaRFC2544ThroughputTestDuration | read-write | current | The SAA RFC2544 Throughput test duration, in seconds. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.14 | ColumnprvtSaaRFC2544ThroughputTestMaxFrameloss | read-write | current | The maximum frameloss to declare a successful SAA RFC2544 Throughput test in 0.001 of a percent. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.15 | ColumnprvtSaaRFC2544ThroughputTestCVLAN0 | read-write | current | C-VLAN ID for the SAA RFC2544 Throughput test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.16 | ColumnprvtSaaRFC2544ThroughputTestCVLAN0Priority | read-write | current | VPT for C-VLAN0 for the SAA RFC2544 Throughput test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.17 | ColumnprvtSaaRFC2544ThroughputTestCVLAN0DropEligible | read-write | current | Drop Eligible flag for C-VLAN0 for the SAA RFC2544 Throughput test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.18 | ColumnprvtSaaRFC2544ThroughputTestSVLAN | read-only | current | S-VLAN ID for the SAA RFC2544 Throughput test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.19 | ColumnprvtSaaRFC2544ThroughputTestSVLANPriority | read-write | current | VPT for S-VLAN0 for the SAA RFC2544 Throughput test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.20 | ColumnprvtSaaRFC2544ThroughputTestSVLANDropEligible | read-write | current | Drop Eligible flag for S-VLAN0 for the SAA RFC2544 Throughput test. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.21 | ColumnprvtSaaRFC2544ThroughputTestPDUSize | read-write | current | Bitmask with predefined packet sizes for SAA RFC2544 Throughput test: 64,128,256,512,1024,1280,1518,1530,2000,9000 (LSB set=64...10th bit set =9000) |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.22 | ColumnprvtSaaRFC2544ThroughputTestACKTimeout | read-write | current | Defines the timeout for a SAA RFC2544 Throughput test tail to send an ACK MCC. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.23 | ColumnprvtSaaRFC2544ThroughputTestLoopbackType | read-write | current | SAA RFC2544 Throughput test loopback type. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.24 | ColumnprvtSaaRFC2544ThroughputTestPaternType | read-write | current | SAA RFC2544 Throughput test patern type. Options for it are none, null, null-crc, prbs, prbs-crc. |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.25 | ColumnprvtSaaRFC2544ThroughputTestRowStatus | read-create | current | The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be… |
| 1.3.6.1.4.1.738.1.5.130.1.1.2.1.26 | ColumnprvtSaaRFC2544ThroughputTestEthertype | read-create | current | SAA RFC2544 Throughput test Ethertype. |
| 1.3.6.1.4.1.738.1.5.130.1.1.3 | TableprvtSaaY1731LoopbackTestTable | not-accessible | current | This table holds the configuration for a SAA Y1731 Loopback test. It describes the FPGA configuration. |
| 1.3.6.1.4.1.738.1.5.130.1.1.3.1 | RowprvtSaaY1731LoopbackTestEntry | not-accessible | current | NONE |
| 1.3.6.1.4.1.738.1.5.130.1.1.3.1.1 | ColumnprvtSaaY1731LoopbackTestEncapType | not-accessible | current | SAA Y1731 Loopback test encapsulation type. It can be either test over VLAN or test over Service. The value 1 is the default value representing that neither ty… |
| 1.3.6.1.4.1.738.1.5.130.1.1.3.1.2 | ColumnprvtSaaY1731LoopbackTestEncapValue | not-accessible | current | The value of the defined SAA Y1731 Lopback test encapsulation. It should be either the Vlan ID or the Service ID, depending on the type set in prvtSaaY1731Loop… |
| 1.3.6.1.4.1.738.1.5.130.1.1.3.1.3 | ColumnprvtSaaY1731LoopbackTestUserPort | read-write | current | For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation is VLAN type and it determines the port on which the user is connected. |
| 1.3.6.1.4.1.738.1.5.130.1.1.3.1.4 | ColumnprvtSaaY1731LoopbackTestUplinkPort | read-write | current | For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation is VLAN type and it determines the port that the SAA test devices are connected t… |
| 1.3.6.1.4.1.738.1.5.130.1.1.3.1.5 | ColumnprvtSaaY1731LoopbackTestType | read-write | current | SAA Y1731 Loopback test type. Specifies the test being perfoer |
| 1.3.6.1.4.1.738.1.5.130.1.1.3.1.6 | ColumnprvtSaaY1731LoopbackTestRowStatus | read-create | current | The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be… |
| 1.3.6.1.4.1.738.1.5.130.1.1.3.1.7 | ColumnprvtSaaY1731LoopbackTestCCMAPSCount | read-write | current | Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not. |
| 1.3.6.1.4.1.738.1.5.130.1.1.3.1.8 | ColumnprvtSaaY1731LoopbackTestCountAllPriorities | read-write | current | Determines whether to count all packets ignoring the priority. |
| 1.3.6.1.4.1.738.1.5.130.1.2 | NodeprvtSaaTestResult | |||
| 1.3.6.1.4.1.738.1.5.130.1.2.1 | TableprvtSaaY1731TestResultTable | not-accessible | current | This table contains SAA results for Y1731 tests. |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1 | RowprvtSaaY1731TestResultEntry | not-accessible | current | NONE |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.1 | ColumnprvtSaaY1731TestResultIndex | not-accessible | current | SAA Y1731 test results table index |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.2 | ColumnprvtSaaY1731TestResultDelayNE | read-only | current | Near end delay result in 0.01 of a microsecond |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.3 | ColumnprvtSaaY1731TestResultDelayFE | read-only | current | Far end delay result in 0.01 of a microsecond |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.4 | ColumnprvtSaaY1731TestResultJitterNE | read-only | current | Near end jitter result in 0.01 of a microsecond |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.5 | ColumnprvtSaaY1731TestResultJitterFE | read-only | current | Far end jitter result in 0.01 of a microsecond |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.6 | ColumnprvtSaaY1731TestResultFrameLossNE | read-only | current | Near end frame-loss result in 0.0000001 of a percent |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.7 | ColumnprvtSaaY1731TestResultFrameLossFE | read-only | current | Far end frame-loss result in 0.0000001 of a percent |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.8 | ColumnprvtSaaY1731TestResultFramesSentNE | read-only | current | Near end sent frames |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.9 | ColumnprvtSaaY1731TestResultFramesSentFE | read-only | current | Far end sent frames |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.10 | ColumnprvtSaaY1731TestResultFramesRcvdNE | read-only | current | Near end received frames |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.11 | ColumnprvtSaaY1731TestResultFramesRcvdFE | read-only | current | Far end received frames |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.12 | ColumnprvtSaaY1731TestResultPacketsSent | read-only | current | The test packets sent between devices |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.13 | ColumnprvtSaaY1731TestResultNoTimeouts | read-only | current | Number of timeouts for the SAA Y1731 Pm test |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.14 | ColumnprvtSaaY1731TestResultNoErrors | read-only | current | Number of errors for the SAA Y1731 Pm test |
| 1.3.6.1.4.1.738.1.5.130.1.2.1.1.15 | ColumnprvtSaaY1731TestResultCompletionTime | read-only | current | Completion time in seconds for the SAA Y1731 PM test. |
| 1.3.6.1.4.1.738.1.5.130.1.2.2 | TableprvtSaaRFC2544TestResultTable | not-accessible | current | This table contains SAA results for RFC2544 tests. |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1 | RowprvtSaaRFC2544TestResultEntry | not-accessible | current | NONE |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1.1 | ColumnprvtSaaRFC2544TestResultIndex | not-accessible | current | SAA RFC2544 Throughput test results table index. Index will take values 1 to 9, each value representing a frame size from this list: 64,128,256,512,1024,1280,1… |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1.2 | ColumnprvtSaaRFC2544TestResultFrameSize | read-only | current | Frame size of the SAA RFC2544 test. Possible values are: 64,128,256,512,1024,1280,1518,2000,9000 |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1.3 | ColumnprvtSaaRFC2544TestResultFrameLoss | read-only | current | Frame loss of the SAA RFC2544 test measured in 0.001 of a percent |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1.4 | ColumnprvtSaaRFC2544TestResultThroughput | read-only | current | Throughput of the SAA RFC2544 test measured in Kbps |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1.5 | ColumnprvtSaaRFC2544TestResultNetThroughput | read-only | current | The actual throughput of the SAA RFC2544 test containing only user data. It is measured in Kbps. |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1.6 | ColumnprvtSaaRFC2544TestResultStatus | read-only | current | Status of the SAA RFC2544 test |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1.7 | ColumnprvtSaaRFC2544TestResultDelayMinimum | read-only | current | Minimum delay for SAA RFC2544 test measured in 1/100th of a microsecond. |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1.8 | ColumnprvtSaaRFC2544TestResultDelayAverage | read-only | current | Average delay for SAA RFC2544 test measured in 1/100th of a microsecond. |
| 1.3.6.1.4.1.738.1.5.130.1.2.2.1.9 | ColumnprvtSaaRFC2544TestResultDelayMaximum | read-only | current | Maximum delay for SAA RFC2544 test measured in 1/100th of a microsecond. |
| 1.3.6.1.4.1.738.1.5.130.1.3 | NodeprvtSaaProfiles | |||
| 1.3.6.1.4.1.738.1.5.130.1.3.1 | TableprvtSaaProfileTable | not-accessible | current | Table contains SAA thresholds. |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1 | RowprvtSaaProfileEntry | not-accessible | current | NONE |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1.1 | ColumnprvtSaaProfileIndex | not-accessible | current | SAA profile table index. |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1.2 | ColumnprvtSaaProfileDelayNE | read-write | current | Near end delay in microseconds |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1.3 | ColumnprvtSaaProfileDelayFE | read-write | current | Far end delay in microseconds |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1.4 | ColumnprvtSaaProfileJitterNE | read-write | current | Near end jitter in microseconds |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1.5 | ColumnprvtSaaProfileJitterFE | read-write | current | Far end jitter in microseconds |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1.6 | ColumnprvtSaaProfileFrameLossNE | read-write | current | Near end frame-loss measured in 0.001 of percent |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1.7 | ColumnprvtSaaProfileFrameLossFE | read-write | current | Far end frame-loss measured in 0.001 of percent |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1.8 | ColumnprvtSaaProfileRowStatus | read-create | current | Creation/delete/edit of the SAA profile. |
| 1.3.6.1.4.1.738.1.5.130.1.3.1.1.9 | ColumnprvtSaaProfileName | read-create | current | Name assigned to the SAA profile. |
| 1.3.6.1.4.1.738.1.5.130.1.4 | NodeprvtTwampObjects | |||
| 1.3.6.1.4.1.738.1.5.130.1.4.1 | NodeprvtTwampTest | |||
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1 | TableprvtTwampTestTable | not-accessible | current | Table contains TWAMP tests. |
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1 | RowprvtTwampTestEntry | not-accessible | current | Entry in prvtTwampTestTable |
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.1 | ColumnprvtTwampTestName | not-accessible | current | TWAMP test name. |
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.2 | ColumnprvtTwampTestRowStatus | read-create | current | Create/delete entry in prvtTwampTestTable. |
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.3 | ColumnprvtTwampTestServer | read-create | current | TWAMP test server ip-address. |
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.4 | ColumnprvtTwampTestSessionsCount | read-create | current | The number of parallel test sessions. |
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.5 | ColumnprvtTwampTestPackets | read-create | current | The number of packets in parallel sessions. |
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.6 | ColumnprvtTwampTestTimeout | read-create | current | The timout interval of test packets (in milliseconds). |
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.7 | ColumnprvtTwampTestDelay | read-create | current | The delay interval between test packets (in milliseconds) |
| 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.8 | ColumnprvtTwampTestExecuteNow | read-create | current | When this object is set to '1', command self-test execute-now. When this object is set to '2' the self-test is stopped. Setting the variable to '0' results in … |
| 1.3.6.1.4.1.738.1.5.130.1.4.2 | NodeprvtTwampServer | |||
| 1.3.6.1.4.1.738.1.5.130.1.4.2.1 | ScalarprvtTwampServerInnactivity | read-write | current | The server innactivity timeout interval of the TWAMP server (in seconds). |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.2 | ScalarprvtTwampServerSessionInnactivity | read-write | current | The session innactivity timeout interval of the TWAMP server (in seconds). |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.3 | ScalarprvtTwampServerMaxSessions | read-write | current | The maximum number of controll sessions supported by the TWAMP server. |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.4 | ScalarprvtTwampServerMaxParallelSessions | read-write | current | The maximum number of parallel test sessions for each client supperted by the TWAMP server. |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.5 | ScalarprvtTwampServerShutdown | read-write | current | The administrative state of the TWAMP server. |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.6 | TableprvtTwampClientTable | not-accessible | current | Table contains the allowed clients for the TWAMP server. |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.6.1 | RowprvtTwampClientEntry | not-accessible | current | Entry in twampClientTable. |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.6.1.1 | ColumnprvtTwampClientIp | not-accessible | current | The ip-address of the client. |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.6.1.2 | ColumnprvtTwampClientRowStatus | read-create | current | create/delete entry in prvtTwampClientTable |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.7 | ScalarprvtTwampServerControlSessions | read-only | current | The number of current control sessions established on the TWAMP server. |
| 1.3.6.1.4.1.738.1.5.130.1.4.2.8 | ScalarprvtTwampServerTestSessions | read-only | current | The number of current test sessions established on the TWAMP server. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3 | NodeprvtTwampTestResult | |||
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1 | TableprvtTwampTestResultTable | not-accessible | current | Table contains statistics of the executed TWAMP tests. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1 | RowprvtTwampTestResultEntry | not-accessible | current | Entry in twampTestResultTable |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.1 | ColumnprvtTwampTestId | read-only | current | The internal ID of the TWAMP test instance. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.2 | ColumnprvtTwampTestResultName | read-only | current | TWAMP test name. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.3 | ColumnprvtTwampTestStartTime | read-only | current | The start time of the TWAMP test instance. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.4 | ColumnprvtTwampTestServerAddress | read-only | current | The server ip-address of the TWAMP test instance. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.5 | ColumnprvtTwampTestSessions | read-only | current | The number of parallel test sessions of the TWAMP test instance. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.6 | ColumnprvtTwampTestState | read-only | current | The status of the executed TWAMP test instance. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.7 | ColumnprvtTwampTestRtt | read-only | current | The average round-trip time of the TWAMP test sample. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.8 | ColumnprvtTwampTestMinRtt | read-only | current | The minimum round-trip time of the TWAMP test sample. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.9 | ColumnprvtTwampTestMaxRtt | read-only | current | The maximum round-trip time of the TWAMP test sample. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.10 | ColumnprvtTwampTestPcktSent | read-only | current | The number of test packets sent for the TWAMP test instance. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.11 | ColumnprvtTwampTestPcktLost | read-only | current | The number of lost test packets. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.12 | ColumnprvtTwampTestPcktDrop | read-only | current | The number of dropped test packets. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.13 | ColumnprvtTwampTestVariation | read-only | current | The maximum module variation of the TWAMP test sample |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.14 | ColumnprvtTwampTestVariationLow | read-only | current | The percent of singletons whose variation is less than 10% of the negated maximum module variation of the sample. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.15 | ColumnprvtTwampTestVariationMiddle | read-only | current | The percent of singletons whose variation by module is less than 10% of the maximum module variation of the sample. |
| 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.16 | ColumnprvtTwampTestVariationHigh | read-only | current | The percent of singletons whose variation is greater than 10% of the maximum module variation of the sample. |
| 1.3.6.1.4.1.738.1.5.130.2 | NodeprvtSaaConformance | |||
| 1.3.6.1.4.1.738.1.5.130.2.1 | NodeprvtSaaCompliances | |||
| 1.3.6.1.4.1.738.1.5.130.2.1.1 | ComplianceprvtSaaCompliance | current | The compliance statement for support of the SAA MIB module. | |
| 1.3.6.1.4.1.738.1.5.130.2.2 | NodeprvtSaaGroups | |||
| 1.3.6.1.4.1.738.1.5.130.2.2.1 | GroupprvtSaaY1731TestGroup | current | Objects for the SAA Y1731 test group. | |
| 1.3.6.1.4.1.738.1.5.130.2.2.2 | GroupprvtSaaRFC2544TestGroup | current | Objects for the SAA RFC2544 test group. | |
| 1.3.6.1.4.1.738.1.5.130.2.2.3 | GroupprvtSaaY1731TestResultsGroup | current | Objects for the SAA Y1731 test results group. | |
| 1.3.6.1.4.1.738.1.5.130.2.2.4 | GroupprvtSaaRFC2544TestResultsGroup | current | Objects for the SAA RFC2544 test results group. | |
| 1.3.6.1.4.1.738.1.5.130.2.2.5 | GroupprvtSaaProfilesGroup | current | Objects for the SAA profiles group. | |
| 1.3.6.1.4.1.738.1.5.130.2.2.6 | GroupprvtSaaNotificationsGroup | current | Objects for the Notifications group. | |
| 1.3.6.1.4.1.738.1.5.130.2.2.7 | GroupprvtSaaY1731LoopbackTestGroup | current | Objects for the SAA Y1731 Loopback test group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PrvtTwampDecimalPercent | OCTET STRING (SIZE(1..10)) | current | A percentage value in decimal format. |
| PrvtTwampTestNameType | OCTET STRING (SIZE(1..32)) | current | TWAMP test name type (1..32 characters). |