PRVT-SPANNING-TREE-MIB
97 objects
The private MIB module for management of the spanning tree and fast ring protocols.
Imported Objects
| IF-MIB | ifIndex |
| PRVT-SWITCH-MIB | switch |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.5.107 | IdentityprvtSpanningTreeMIB | The private MIB module for management of the spanning tree and fast ring protocols. | ||
| 1.3.6.1.4.1.738.1.5.107.0 | NodeprvtStNotifications | |||
| 1.3.6.1.4.1.738.1.5.107.0.1 | NotificationstTopologyChange | current | A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding … | |
| 1.3.6.1.4.1.738.1.5.107.0.2 | NotificationstNewRoot | current | The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new… | |
| 1.3.6.1.4.1.738.1.5.107.0.3 | NotificationmstTopologyChange | current | A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding … | |
| 1.3.6.1.4.1.738.1.5.107.0.4 | NotificationmstNewRoot | current | The newRoot trap indicates that the sending agent has become the new root of the MSTP; the trap is sent by a bridge soon after its election as the new root, e.… | |
| 1.3.6.1.4.1.738.1.5.107.1 | NodeprvtStObjects | |||
| 1.3.6.1.4.1.738.1.5.107.1.1 | NodeprvtStCommon | |||
| 1.3.6.1.4.1.738.1.5.107.1.1.1 | ScalarprvtStProviderBridgeAddress | read-write | current | Chose wich standard - 802.1d or 802.1ad will be used for BPDUs |
| 1.3.6.1.4.1.738.1.5.107.1.1.2 | ScalarprvtStMaxAge | read-write | current | The maximum age, in seconds, of Spanning Tree Protocol information learned from the network on any port before it is discarded. Note that the following relatio… |
| 1.3.6.1.4.1.738.1.5.107.1.1.3 | ScalarprvtStHelloTime | read-write | current | The amount of time, in seconds, between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or tryi… |
| 1.3.6.1.4.1.738.1.5.107.1.1.4 | ScalarprvtStForwardDelay | read-write | current | The amount of time in seconds to delay before entering forwarding state. Note that the following relationship is enforced: 2 x (prvtStForwardDelay - 1) >= prvt… |
| 1.3.6.1.4.1.738.1.5.107.1.1.5 | ScalarprvtStPriority | read-write | current | The bridge priority. Valid values are multiples of 4096. |
| 1.3.6.1.4.1.738.1.5.107.1.1.6 | ScalarprvtStTimeSinceTopologyChange | read-only | current | The time, in seconds, since last topology change. |
| 1.3.6.1.4.1.738.1.5.107.1.1.7 | ScalarprvtStTopChanges | read-only | current | The total number of topology changes detected. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8 | TableprvtStPortTable | not-accessible | current | A table containing port specific configuration information for the spanning-tree protocols. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1 | RowprvtStPortEntry | not-accessible | current | An entry in prvtStPortTable. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.1 | ColumnprvtStPortIfName | read-only | current | RowStatus for prvtStPortTable |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.2 | ColumnprvtStPortRowStatus | read-create | current | RowStatus for prvtStPortTable |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.3 | ColumnprvtStPortBpduTx | read-create | current | Enable transmission of BPDUs on this port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.4 | ColumnprvtStPortBpduRx | read-create | current | Configures how BPDUs received by the port should be processed. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.5 | ColumnprvtStPortDetectBpduLoss | read-create | current | Enable detection of BPDU loss. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.6 | ColumnprvtStPortCiscoCompliant | read-create | current | Configure this port to be Cisco compliant. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.7 | ColumnprvtStPortEdge | read-create | current | Set port as an edge-port. Note that ring ports can not be set as edge ports. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.8 | ColumnprvtStPortEdgeStatus | read-only | current | Whether this port is currently operating as an edge port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.9 | ColumnprvtStPortEdgeFlush | read-create | current | Flush edge port when blocking. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.10 | ColumnprvtStPortLinkType | read-create | current | Configure the link type for this port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.11 | ColumnprvtStPortLinkTypeStatus | read-only | current | The current link type status for this port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.12 | ColumnprvtStPortRestrictedRoot | read-create | current | Enable root restriction on this port. Note that ring ports can not have restricted root enabled. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.13 | ColumnprvtStPortRestrictedTcn | read-create | current | Enable topology change notification (TCN) restriction on this port. Note that ring ports can not have restricted TCN enabled. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.14 | ColumnprvtStPortPathCost | read-create | current | Configure the path cost for this port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.15 | ColumnprvtStPortPriority | read-create | current | Set port priority. Valid values are multiples of 16. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.16 | ColumnprvtStPortAdminStatus | read-create | current | Enable or disable spanning-tree on this port. Note that ring ports can not be set to disabled. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.17 | ColumnprvtStPortState | read-only | current | The current state of this port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.18 | ColumnprvtStPortRole | read-only | current | The current role for this port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.19 | ColumnprvtStPortDesPCost | read-only | current | The designated path cost for this port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.20 | ColumnprvtStPortDesBridgeID | read-only | current | The designated bridge ID for this port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.8.1.21 | ColumnprvtStPortDesPortID | read-only | current | The designated port ID for this port. |
| 1.3.6.1.4.1.738.1.5.107.1.1.9 | ScalarprvtStTxHoldCount | read-write | current | TxHoldCount is the value used by the Port Transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.738.1.5.107.1.1.10 | ScalarprvtStLearnMode | read-write | current | Specify learning of new MACs on non-edge ports |
| 1.3.6.1.4.1.738.1.5.107.1.2 | NodeprvtStStp | |||
| 1.3.6.1.4.1.738.1.5.107.1.2.1 | ScalarprvtStStpProtocolDisabled | read-write | current | Enable STP protocol. Note that only one flavour of xSTP can be running at a time (i.e. only one of prvtStStpProtocolDisabled, prvtStRstpProtocolDisabled, prvtS… |
| 1.3.6.1.4.1.738.1.5.107.1.3 | NodeprvtStRstp | |||
| 1.3.6.1.4.1.738.1.5.107.1.3.1 | ScalarprvtStRstpProtocolDisabled | read-write | current | Enable RSTP protocol. Note that only one flavour of xSTP can be running at a time (i.e. only one of prvtStStpProtocolDisabled, prvtStRstpProtocolDisabled, prvt… |
| 1.3.6.1.4.1.738.1.5.107.1.4 | NodeprvtStMstp | |||
| 1.3.6.1.4.1.738.1.5.107.1.4.1 | ScalarprvtStMstpProtocolDisabled | read-write | current | Enable MSTP protocol. Note that only one flavour of xSTP can be running at a time (i.e. only one of prvtStStpProtocolDisabled, prvtStRstpProtocolDisabled, prvt… |
| 1.3.6.1.4.1.738.1.5.107.1.4.2 | ScalarprvtStMstpRegionName | read-write | current | The configuration name of the MST region to which this bridge belongs. |
| 1.3.6.1.4.1.738.1.5.107.1.4.3 | ScalarprvtStMstpRegionRevision | read-write | current | MST region revision. |
| 1.3.6.1.4.1.738.1.5.107.1.4.4 | ScalarprvtStMstpMaxHops | read-write | current | Maximum number of hops for the MST region. |
| 1.3.6.1.4.1.738.1.5.107.1.4.6 | ScalarprvtStMstpMigrationDelay | read-only | current | The Migration Delay timer in seconds. |
| 1.3.6.1.4.1.738.1.5.107.1.4.8 | TableprvtStMstpInstTable | not-accessible | current | This table contains MST instance information. |
| 1.3.6.1.4.1.738.1.5.107.1.4.8.1 | RowprvtStMstpInstEntry | not-accessible | current | An entry in prvtStMstpInstTable. |
| 1.3.6.1.4.1.738.1.5.107.1.4.8.1.1 | ColumnprvtStMstpInstId | not-accessible | current | An MST instance identifier. |
| 1.3.6.1.4.1.738.1.5.107.1.4.8.1.2 | ColumnprvtStMstpInstRowStatus | read-create | current | RowStatus entry for prvtStMstpInstTable. |
| 1.3.6.1.4.1.738.1.5.107.1.4.8.1.3 | ColumnprvtStMstpInstPriority | read-create | current | The bridge priority for this MST instance. Valid values are multiples of 4096. |
| 1.3.6.1.4.1.738.1.5.107.1.4.8.1.4 | ColumnprvtStMstpInstTimeSinceTopChng | read-only | current | The time in seconds since the last time a topology change was detected for this MST instance. |
| 1.3.6.1.4.1.738.1.5.107.1.4.8.1.5 | ColumnprvtStMstpInstTopChanges | read-only | current | The total number of topology changes detected for this MST instance. |
| 1.3.6.1.4.1.738.1.5.107.1.4.9 | TableprvtStMstpInstStatTable | not-accessible | current | This table contains additional MST instance status information. |
| 1.3.6.1.4.1.738.1.5.107.1.4.9.1 | RowprvtStMstpInstStatEntry | not-accessible | current | An entry in prvtStMstpInstStatTable. |
| 1.3.6.1.4.1.738.1.5.107.1.4.9.1.2 | ColumnprvtStMstpInstStatRRootID | read-only | current | The regional root ID for this MST instance. |
| 1.3.6.1.4.1.738.1.5.107.1.4.9.1.3 | ColumnprvtStMstpInstStatRemHopCount | read-only | current | The remaining hop count for this MST instance. |
| 1.3.6.1.4.1.738.1.5.107.1.4.10 | TableprvtStMstpVlanPerInstTable | not-accessible | current | Defines the mapping of VLANs to Spanning Tree instances. |
| 1.3.6.1.4.1.738.1.5.107.1.4.10.1 | RowprvtStMstpVlanPerInstEntry | not-accessible | current | An entry in prvtStMstpVlanPerInstTable. |
| 1.3.6.1.4.1.738.1.5.107.1.4.10.1.1 | ColumnprvtStMstpVlanPerInstVlanId | not-accessible | current | VLAN identifier |
| 1.3.6.1.4.1.738.1.5.107.1.4.10.1.2 | ColumnprvtStMstpVlanPerInstRowStatus | read-create | current | RowStatus for prvtStMstpVlanPerInstTable. |
| 1.3.6.1.4.1.738.1.5.107.1.4.10.1.3 | ColumnprvtStMstpVlanPerInstMstId | read-create | current | The MST instance to which this VLAN belongs. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12 | TableprvtStMstpInstPortTable | not-accessible | current | A table containing configuration information regarding a specific port for a given MST instance. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1 | RowprvtStMstpInstPortEntry | not-accessible | current | An entry in prvtStMstpInstPortTable. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.2 | ColumnprvtStMInstPortInstId | read-create | current | Instance ID |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.3 | ColumnprvtStMInstPortRowStatus | read-create | current | RowStatus for prvtStMstpInstPortTable |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.4 | ColumnprvtStMInstPortPathCost | read-create | current | The path cost for this MST instance port. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.5 | ColumnprvtStMInstPortPriority | read-create | current | The port priority for this MST instance port. Valid values are multiples of 16. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.6 | ColumnprvtStMInstPortAdminStatus | read-create | current | Enable or disable spanning-tree for this MST instance port. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.7 | ColumnprvtStMInstPortState | read-only | current | The current state of this MST instance port. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.8 | ColumnprvtStMInstPortFwdTrans | read-only | current | The number of transitions from Learning state to Forwarding state that have been made for this MST instance port. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.9 | ColumnprvtStMInstPortStatRole | read-only | current | The current role for this MST instance port. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.10 | ColumnprvtStMInstPortDesPCost | read-only | current | The designated port path cost. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.11 | ColumnprvtStMInstPortDesBridgeID | read-only | current | The designated bridge ID. |
| 1.3.6.1.4.1.738.1.5.107.1.4.12.1.12 | ColumnprvtStMInstPortDesPortID | read-only | current | The designated port ID. |
| 1.3.6.1.4.1.738.1.5.107.1.5 | NodeprvtStFRing | |||
| 1.3.6.1.4.1.738.1.5.107.1.5.1 | ScalarprvtStFRingProtocolDisabled | read-write | current | Enable fast ring protocol. Note that only one flavour of xSTP can be running at a time (i.e. only one of prvtStStpProtocolDisabled, prvtStRstpProtocolDisabled,… |
| 1.3.6.1.4.1.738.1.5.107.1.5.2 | ScalarprvtStFRingPrefLink | read-write | current | Specify preferred fast ring port |
| 1.3.6.1.4.1.738.1.5.107.1.5.3 | TableprvtStFRingInstTable | not-accessible | current | Each row in the table defines an instance of a fast ring. Currently only one instance is supported. An attempt to create more than one instance will fail. Whil… |
| 1.3.6.1.4.1.738.1.5.107.1.5.3.1 | RowprvtStFRingInstEntry | not-accessible | current | An entry in prvtStFRingInstTable. |
| 1.3.6.1.4.1.738.1.5.107.1.5.3.1.1 | ColumnprvtStFRingInstPort1 | not-accessible | current | The first ring port belonging to the fast ring. prvtStFRingInstPort1 must exist in prvtStPortTable. prvtStFRingInstPort1 must not equal prvtStFRingInstPort2. |
| 1.3.6.1.4.1.738.1.5.107.1.5.3.1.2 | ColumnprvtStFRingInstPort2 | not-accessible | current | The second ring port belonging to the fast ring. prvtStFRingInstPort2 must exist in prvtStPortTable. prvtStFRingInstPort1 must not equal prvtStFRingInstPort2. |
| 1.3.6.1.4.1.738.1.5.107.1.5.3.1.3 | ColumnprvtStFRingInstRowStatus | read-create | current | RowStatus entry for prvtStFRingInstTable. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PrvtStBridgeIdTC | OCTET STRING (SIZE(8)) | current | The bridge identifier, as used in the Spanning Tree Protocol, to uniquely identify a bridge. |
| PrvtStBridgePriorityTC | Unsigned32 (0 | 4096 | 8192 | 12288 | 16384 | 20480 | 24576 | 28672 | 32768 | 36864 | 40960 | 45056 | 49152 | 53248 | 57344 | 61440) | current | Possible values for bridge priority. Valid values are multiples of 4096. |
| PrvtStInstIdExceptZeroTC | Unsigned32 (1..15) | current | A non-zero spanning tree instance identifier. |
| PrvtStInstIdTC | Unsigned32 (0..15) | current | A spanning tree instance identifier. |
| PrvtStLearnModeTC | INTEGER { none(0), standard(1), temporary-disabled(2) } | current | Learn mode. |
| PrvtStLinkTypeTC | INTEGER { auto(1), pointToPoint(2), shared(3) } | current | Link types. |
| PrvtStPortIdTC | Unsigned32 (0..65535) | current | The port identifier. |
| PrvtStPortPriorityTC | Unsigned32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 | 176 | 192 | 208 | 224 | 240) | current | Possible values for port priority. Valid values are multiples of 16. |
| PrvtStPortRoleTC | INTEGER { disabled(1), root(2), designated(3), alternate(4), backup(5), master(6) } | current | Possible port roles. |
| PrvtStPortStateTC | INTEGER { forward(1), block(2), learn(3) } | current | Possible port states. |