PRVT-SWITCH-ACCESS-LIST-MIB
230 objects
The access-list MIB module that controls L3 switches access-list parameters
Imported Objects
| IF-MIB | ifIndex |
| PRVT-SERV-MIB | sapEncapValue sapPortId sdpId svcId |
| PRVT-SWITCH-MIB | ipSwitch |
| Q-BRIDGE-MIB | dot1qVlanIndex dot1qVlanStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.6.1 | IdentityprvtSwitchAccessListMib | The access-list MIB module that controls L3 switches access-list parameters | ||
| 1.3.6.1.4.1.738.1.6.1.0 | NodeprvtSwitchAccessListNotifications | |||
| 1.3.6.1.4.1.738.1.6.1.0.1 | NotificationstandardAccessListRuleMatched | current | This trap indicates that a packet matching a standard ACL rule has been received. | |
| 1.3.6.1.4.1.738.1.6.1.0.2 | NotificationextendedAccessListRuleMatched | current | This trap indicates that a packet matching an extended ACL rule has been received. | |
| 1.3.6.1.4.1.738.1.6.1.0.3 | NotificationmacAccessListRuleMatched | current | This trap indicates that a packet matching a mac ACL rule has been received. | |
| 1.3.6.1.4.1.738.1.6.1.0.4 | NotificationetherTypeAccessListRuleMatched | current | This trap indicates that a packet matching a ether-type ACL rule has been received. | |
| 1.3.6.1.4.1.738.1.6.1.1 | NodeaccessLists | |||
| 1.3.6.1.4.1.738.1.6.1.1.1 | ScalaraccessListTemplate | read-write | current | The access-list template in use. For non E-series devices, the device must be restarted for this setting to take effect. |
| 1.3.6.1.4.1.738.1.6.1.1.2 | NodeaccessGroupsDefinitions | |||
| 1.3.6.1.4.1.738.1.6.1.1.2.1 | TableaccessListControlTable | not-accessible | current | This table controls the creation or removal of a access-list group from all access-list tables. The real programming of values is done in the coresponding acce… |
| 1.3.6.1.4.1.738.1.6.1.1.2.1.1 | RowaccessListControlEntry | not-accessible | current | An entry in the accessListControlTable table. |
| 1.3.6.1.4.1.738.1.6.1.1.2.1.1.1 | ColumnaccessListControlListGroup | accessible-for-notify | current | This object identifies the index of the group of access-list rules Each range of group indexes is related to a different access-list type 1..99 for standard ac… |
| 1.3.6.1.4.1.738.1.6.1.1.2.1.1.2 | ColumnaccessListControlRowStatus | read-create | current | This indicates the row status & enables creation & deletion of lines in this table. See SNMPv2-TC for more information. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2 | TablestandardAccessListTable | not-accessible | current | This table contains standard access-list parameters. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1 | RowstandardAccessListEntry | not-accessible | current | An entry in the standardAccessListTable table. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.1 | ColumnstandardAccessListIndex | not-accessible | current | Index of the particular rule of the group. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.2 | ColumnstandardAccessListAction | read-create | current | The action to preform if the condition of this access-list rule condition is true. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.3 | ColumnstandardAccessListIpSrc | read-create | current | The IP source address associated with this flow. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.4 | ColumnstandardAccessListIpMASKsrc | read-create | current | The IP mask that, together with standardAccessListIpSrc, defines the subnet. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.5 | ColumnstandardAccessListRemark | read-create | current | Access list entry comment |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.6 | ColumnstandardAccessListLog | read-create | current | Enable normal or extended logging of this access-list rule. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.7 | ColumnstandardAccessListVpt | read-create | current | This object is meaningful : 1.when vlan-priority template is used and will reprezent vlan priority tag. 2.Forwarding class reprezented in the second part of en… |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.8 | ColumnstandardAccessListRowStatus | read-write | current | This indicates the row status & enables creation of rows in this table. In order to be consistent with ACL policy, this object does not allow deletion of rules… |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.9 | ColumnstandardAccessListVlanId | read-create | current | This object shows the customer VLAN. The object is meaningful only if standardAccessListVlanMask is set. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.10 | ColumnstandardAccessListVlanMask | read-create | current | This object shows the customer VLAN mask. It is meaningful only if standardAccessListVlanId is set. The value is in hexadecimal type DisplayString (0xXXX). |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.11 | ColumnstandardAccessListProviderVlanId | read-create | current | This object shows the provider VLAN. The object is meaningful only if standardAccessListProviderVlanMask is set. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.12 | ColumnstandardAccessListProviderVlanMask | read-create | current | This object shows the provider VLAN mask. It is meaningful only if standardAccessListProviderVlanId is set. The value is in hexadecimal type DisplayString (0xX… |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.13 | ColumnstandardAccessListProviderVpt | read-create | current | This object shows the provider VLAN priority tag. A value of 8 means undefined. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.14 | ColumnstandardAccessListUntaggedMode | read-create | current | This object enables the untagged mode |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.15 | ColumnstandardAccessListDropLevel | read-create | current | This object define drop-level. |
| 1.3.6.1.4.1.738.1.6.1.1.2.2.1.16 | ColumnstandardAccessListDscp | read-create | current | The object shows the DiffServ Point (DSCP) value from IP header. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3 | TableextendedAccessListTable | not-accessible | current | This table contains extended access-list parameters. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1 | RowextendedAccessListEntry | not-accessible | current | An entry in the extendedAccessListTable table. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.1 | ColumnextendedAccessListIndex | not-accessible | current | Index of the particular rule of the group. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.2 | ColumnextendedAccessListAction | read-create | current | The action to preform if this access-list rule condition is true. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.3 | ColumnextendedAccessListIpProtocol | read-create | current | The IP protocol number (see IpProtocol). |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.4 | ColumnextendedAccessListIpSrc | read-create | current | The IP source address associated with this flow. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.5 | ColumnextendedAccessListIpMASKsrc | read-create | current | The IP mask, together with extendendAccessListIpSrc, defines the subnet. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.6 | ColumnextendedAccessListPortDefSrc | read-create | current | The extendedAccessListPortDefSrc object operates together with the port number filed inside the access-list & controls how the port number is being processed. … |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.7 | ColumnextendedAccessListPortNumSrc | read-create | current | UDP/TCP port number. A value of 0 represents undefined port number. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.8 | ColumnextendedAccessListPortRangeSrc | read-create | current | UDP/TCP ned range port number. A value of 0 represents undefined port number. Valid only with extendedAccessListPortDefSrc value of range(2). |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.9 | ColumnextendedAccessListIpDest | read-create | current | The IP destination address associated with this flow. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.10 | ColumnextendedAccessListIpMASKdst | read-create | current | The IP mask, together with extendedAccessListIpMASKdst, defines the subnet. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.11 | ColumnextendedAccessListPortDefDst | read-create | current | The extendedAccessListPortDefDst object operates together with the port number filed inside the access-list & controls how the port number is being processed. … |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.12 | ColumnextendedAccessListPortNumDst | read-create | current | UDP/TCP port number. A value of 0 represents undefined port number. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.13 | ColumnextendedAccessListPortRangeDst | read-create | current | UDP/TCP ned range port number. A value of 0 represents undefined port number. Valid for value range (2) of extendedAccessListPortDefDst. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.14 | ColumnextendedAccessListTos | read-create | current | This object shows the type of service value. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.15 | ColumnextendedAccessListPrec | read-create | current | Precedence value. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.16 | ColumnextendedAccessListModifyTos | read-create | current | extendedAccessListModifyTos must be enabled if the user wants the ToS to be modified. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.17 | ColumnextendedAccessListRemark | read-create | current | Access list entry comment. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.18 | ColumnextendedAccessListIcmpType | read-create | current | ICMP message type. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.19 | ColumnextendedAccessListIcmpCode | read-create | current | ICMP message code. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.20 | ColumnextendedAccessListIgmpType | read-create | current | IGMP message type. This object is not supported in E-Series |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.21 | ColumnextendedAccessListEstablished | read-create | current | When TCP protocol type is chosen, setting this object indicates that established connections will be matched. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.22 | ColumnextendedAccessListLog | read-create | current | Enable normal or extended logging of this access-list rule. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.23 | ColumnextendedAccessListVpt | read-create | current | This object is meaningful : 1.when vlan-priority template is used and will reprezent vlan priority tag. 2.Forwarding class reprezented in the second part of en… |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.24 | ColumnextendedAccessListRowStatus | read-write | current | This indicates the row status & enables creation of lines in this table. In order to be consistent with ACL policy, this object does not allow deletion of rule… |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.25 | ColumnextendedAccessListVlanId | read-create | current | This object shows the customer VLAN. The object is meaningful only if extendedAccessListVlanMask is set. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.26 | ColumnextendedAccessListVlanMask | read-create | current | This object shows the customer VLAN mask. It is meaningful only if extendedAccessListVlanId is set. The value is in hexadecimal type string(0x..). |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.27 | ColumnextendedAccessListProviderVlanId | read-create | current | This object shows the provider VLAN. The object is meaningful only if extendedAccessListProviderVlanMask is set. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.28 | ColumnextendedAccessListProviderVlanMask | read-create | current | This object shows the provider VLAN mask. It is meaningful only if extendedAccessListProviderVlanId is set. The value is in hexadecimal type string(0x..). |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.29 | ColumnextendedAccessListProviderVpt | read-create | current | This object shows the provider VLAN priority tag. A value of 8 means undefined. This object is meaningful only if vlan-priority template is used. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.30 | ColumnextendedAccessListUntaggedMode | read-create | current | This object enables the untagged mode. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.31 | ColumnextendedAccessListDropLevel | read-create | current | This object define drop-level. |
| 1.3.6.1.4.1.738.1.6.1.1.2.3.1.32 | ColumnextendedAccessListDscp | read-create | current | The object shows the DiffServ Point (DSCP) value from IP header. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4 | TablemacAccessListTable | not-accessible | current | This table contains MAC access-list parameters. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1 | RowmacAccessListEntry | not-accessible | current | An entry in the macAccessListTable table. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.1 | ColumnmacAccessListIndex | not-accessible | current | Index of the particular rule of the group. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.2 | ColumnmacAccessListAction | read-create | current | The action to preform if this access-list rule condition is true. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.3 | ColumnmacAccessListMacSrc | read-create | current | The object contains the MAC address of source. If this object is not set, the result is 'any' source mac address. If object macAccessListMacSrcMask is not set,… |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.4 | ColumnmacAccessListMacSrcMask | read-create | current | This object contains the mask for MAC source address. The object affects macAccessListMacSrc, defines host or range. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.5 | ColumnmacAccessListMacDst | read-create | current | The object contains the MAC address of destination. If this object is not set, the result is 'any' destination mac address. If object macAccessListMacDstMask i… |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.6 | ColumnmacAccessListMacDstMask | read-create | current | This object contains the mask for MAC destination address. The object affects macAccessListMacDst, defines host or range. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.7 | ColumnmacAccessListRemark | read-create | current | Access list entry comment |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.8 | ColumnmacAccessListLog | read-create | current | Enable normal or extended logging of this access-list rule. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.9 | ColumnmacAccessListRowStatus | read-write | current | This indicates the row status & enables creation of rows in this table. In order to be consistent with ACL policy, this object does not allow deletion of rules… |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.10 | ColumnmacAccessListTos | read-create | current | This object shows the type of service value. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.11 | ColumnmacAccessListPrecedence | read-create | current | This object shows the precedence value. The parameter is matched for IP traffic only. The value is in the range between <0-8>. When precendence is disable the … |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.12 | ColumnmacAccessListVpt | read-create | current | This object is meaningful : 1.when vlan-priority template is used and will reprezent vlan priority tag. 2.Forwarding class reprezented in the second part of en… |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.13 | ColumnmacAccessListVlanId | read-create | current | This object shows the customer VLAN. The object is meaningful only if macAccessListVlanMask is set. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.14 | ColumnmacAccessListVlanMask | read-create | current | This object shows the customer VLAN mask. It is meaningful only if macAccessListVlanId is set. The value is in hexadecimal type string(0x..). |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.15 | ColumnmacAccessListInnerVlanId | read-create | current | This object shows the provider VLAN. The object is meaningful only if macAccessListProviderVlanMask is set. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.16 | ColumnmacAccessListInnerVlanMask | read-create | current | This object shows the provider VLAN mask. It is meaningful only if macAccessListProviderVlanId is set. The value is in hexadecimal type string(0x..). |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.17 | ColumnmacAccessListInnerVpt | read-create | current | This object shows the provider VLAN priority tag. A value of 8 means undefined |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.18 | ColumnmacAccessListEtherType | read-create | current | The object shows the EtherType field in the Ethernet header. The field is matched only for non-IP and non-ARP traffic only. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.19 | ColumnmacAccessListDscp | read-create | current | The object shows the DiffServ Point (DSCP) value from IP header. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.20 | ColumnmacAccessListMatchTraffic | read-create | current | This object shows the type of traffic to match. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.21 | ColumnmacAccessListMatchTrafficPort | read-create | current | This object is meaningful only if macAccessListMatchTraffic is set to 'known-unicast' value - else returns error. The values are of types PORTLIST (for example… |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.22 | ColumnmacAccessListUntaggedMode | read-create | current | This object enables the untagged mode. |
| 1.3.6.1.4.1.738.1.6.1.1.2.4.1.23 | ColumnmacAccessListDropLevel | read-create | current | This object define drop-level. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5 | TableetherTypeAccessListTable | not-accessible | current | This table contains extended MAC access-list parameters. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1 | RowetherTypeAccessListEntry | not-accessible | current | An entry in the etherTypeAccessListTable table. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.1 | ColumnetherTypeAccessListIndex | not-accessible | current | Index of the particular rule of the group. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.2 | ColumnetherTypeAccessListAction | read-create | current | The action to preform if this access-list rule condition is true. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.3 | ColumnetherTypeAccessListEtherType | read-create | current | The IP protocol number (see IpProtocol). |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.4 | ColumnetherTypeAccessListEtherTypeCodeMask | read-create | current | The IP source address associated with this flow. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.5 | ColumnetherTypeAccessListRemark | read-create | current | Access list entry comment |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.6 | ColumnetherTypeAccessListLog | read-create | current | Enable normal or extended logging of this access-list rule. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.7 | ColumnetherTypeAccessListRowStatus | read-write | current | This indicates the row status & enables creation of rows in this table. In order to be consistent with ACL policy, this object does not allow deletion of rules… |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.8 | ColumnetherTypeAccessListVlanId | read-create | current | This object shows the customer VLAN.The object is meaningful only if etherTypeAccessListVlanMask is set. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.9 | ColumnetherTypeAccessListVlanMask | read-create | current | This object shows the customer VLAN mask. It is meaningful only if etherTypeAccessListVlanId is set. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.10 | ColumnetherTypeAccessListProviderVlanId | read-create | current | This object shows the provider VLAN. The object is meaningful only if etherTypeAccessListProviderVlanMask is set. |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.11 | ColumnetherTypeAccessListProviderVlanMask | read-create | current | This object shows the provider VLAN mask. It is meaningful only if etherTypeAccessListProviderVlanId is set. The value is in hexadecimal type string (0x..). |
| 1.3.6.1.4.1.738.1.6.1.1.2.5.1.12 | ColumnetherTypeAccessListProviderVpt | read-create | current | The vlan priority tag. A value of 8 means undefined. This object is meaningful only if vlan-priority template is used. |
| 1.3.6.1.4.1.738.1.6.1.1.3 | NodeaccessListsInterfaces | |||
| 1.3.6.1.4.1.738.1.6.1.1.3.1 | TableaccessListInterfaceTable | not-accessible | current | This table controls the assigment of access groups to an interface. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1 | RowaccessListInterfaceEntry | not-accessible | current | An entry in the AccessListInterfaceEntry table. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.1 | ColumnaccessListInterfaceTableIndex | not-accessible | current | This object identifies the row number for this (ifIndex) interface. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.2 | ColumnaccessListInterfaceGroupIndex | not-accessible | current | This indicates the index of the access group for this interface. This value is the same as the value of accessListControlListGroup for the assigned ACL. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.3 | ColumnaccessListInterfaceDscp | read-create | current | Enable Diffserv codepoint. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.4 | ColumnaccessListInterfaceRowStatus | read-write | current | This indicates the row status & enables creation & deletion of lines in this (and related) tables. See SNMPv2-TC for more information. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.5 | ColumnaccessListInterfacePriority | read-write | current | Priority level value. Valid values are 0 to 7, 8 means undefined. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.6 | ColumnaccessListInterfaceDiscard | read-write | current | Mark discardable or normal for priority on access group Only the E-Series family and the G-Series family boards support the values green, yellow and red. Other… |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.7 | ColumnaccessListInterfaceRateLimit | read-write | current | The maximum rate in kBps(kilobytes per second) |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.8 | ColumnaccessListInterfaceExceedAction | read-write | current | The action to perform when the condition is true. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.9 | ColumnaccessListInterfaceShaper | read-write | current | Enable/disable shaper. This object is supported only in B-series. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.10 | ColumnaccessListInterfaceBurst | read-write | current | The maximum Burst rate in kBps(kilobytes per second). This object is supported only by E-Series and G-series. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.11 | ColumnaccessListInterfaceRedirectIfIndex | read-write | current | This object controls redirection of traffic matching this ACG. If the value is a valid ifIndex, the traffic will be redirected to it. If the value is 0 redirec… |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.12 | ColumnaccessListInterfaceRedirectVlanID | read-write | current | This object controls redirection of traffic matching this ACG. If the value is a valid VLAN ID, the traffic will be redirected to it. If the value is 0 redirec… |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.13 | ColumnaccessListInterfaceRedirectNexthop | read-write | current | This object controls redirection of traffic matching this ACG. If the value is a valid IP address then the traffic will be redirected to it. If the value is 0 … |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.14 | ColumnaccessListInterfacePeakRate | read-write | current | Peak Information Rate in kBps(kilobytes per second). |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.15 | ColumnaccessListInterfacePeakBurst | read-write | current | Peak Burst Size in kBps(kilobytes per second). |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.16 | ColumnaccessListInterfaceColorAware | read-write | current | Toggle Color aware traffic metering. Disabled by default. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.17 | ColumnaccessListInterfacePolicy | read-write | current | Set remarking policy. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.18 | ColumnaccessListInterfaceTrafficClass | read-write | current | Diff Serv CP - Type of Service In E-Series and G-series the range is 0..63. A value of 256 means Traffic Class is not set. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.19 | ColumnaccessListInterfaceSpanRootTrack | read-create | current | The span root track option for VLAN redirects. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.20 | ColumnaccessListInterfaceUntagFilter | read-create | current | The filter for tagged or untagged backets to be applied. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.21 | ColumnaccessListInterfaceTxq | read-create | current | This object performs QoS and remarking of traffic matching an ACG |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.22 | ColumnaccessListInterfaceTxqDropLevel | read-create | current | This object shows the drop-level (green/yellow) and is related to accessListInterfaceTxq. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.23 | ColumnaccessListInterfaceApplyMirror | read-create | current | This object shows that the traffic on the interface will be mirrored |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.24 | ColumnaccessListInterfaceStatistics | read-create | current | This object enables statistics on the interface. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.25 | ColumnaccessListInterfaceDirection | read-create | current | This object determines the ingress-egress type of applied ACL. |
| 1.3.6.1.4.1.738.1.6.1.1.3.1.1.26 | ColumnaccessListInterfaceRateStatistics | read-create | current | This object enables rate statistics on the interface. |
| 1.3.6.1.4.1.738.1.6.1.1.4 | NodeaccessListsVLAN | |||
| 1.3.6.1.4.1.738.1.6.1.1.4.1 | TableaccessListVLANTable | not-accessible | current | This table controls the assignment of access groups to a VLAN. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1 | RowaccessListVLANEntry | not-accessible | current | An entry in the AccessListVLANEntry table. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.1 | ColumnaccessListVLANTableIndex | not-accessible | current | This object identifies the order in which the access group was applied on this VLAN. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.2 | ColumnaccessListVLANGroupIndex | not-accessible | current | This indicates the index of the access group for this VLAN. This value is the same as the value of accessListControlListGroup for the assigned ACL. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.3 | ColumnaccessListVLANDscp | read-create | current | Enable Diffserv codepoint. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.4 | ColumnaccessListVLANRowStatus | read-write | current | This indicates the row status & enables creation & delettion of rows in this and related tables. See SNMPv2-TC for more information. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.5 | ColumnaccessListVLANPriority | read-write | current | Priority level value. Valid values are 0 to 7, 8 means undefined. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.6 | ColumnaccessListVLANDiscard | read-write | current | Mark discardable or normal for priority on access group Only the E-Series family and the G-Series family boards support the values green, yellow and red. Other… |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.7 | ColumnaccessListVLANRateLimit | read-write | current | The maximum rate in kBps(kilobytes per second). |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.8 | ColumnaccessListVLANExceedAction | read-write | current | The action to perform when the condition is true. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.9 | ColumnaccessListVLANBurst | read-write | current | The maximum Burst rate in kBps(kilobytes per second). This object is supported only by E-Series and G-series. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.10 | ColumnaccessListVLANRedirectIfIndex | read-write | current | This object controls redirection of traffic matching this ACG. If the value is a valid ifIndex, the traffic will be redirected to it. If the value is 0 redirec… |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.11 | ColumnaccessListVLANRedirectVlanID | read-write | current | his object controls redirection of traffic matching this ACG. If the value is a valid VLAN ID, the traffic will be redirected to it. If the value is 0 redirect… |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.12 | ColumnaccessListVLANRedirectNexthop | read-write | current | This object controls redirection of traffic matching this ACG. If the value is a valid IP address then the traffic will be redirected to it. If the value is 0 … |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.13 | ColumnaccessListVLANPeakRate | read-write | current | Peak Information Rate in kBps(kilobytes per second). |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.14 | ColumnaccessListVLANPeakBurst | read-write | current | Peak Burst Size in kBps(kilobytes per second). |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.15 | ColumnaccessListVLANColorAware | read-write | current | Toggle Color aware traffic metering.Disabled by default. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.16 | ColumnaccessListVLANPolicy | read-write | current | Set remarking policy. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.17 | ColumnaccessListVLANTrafficClass | read-write | current | Diff Serv CP - Type of Service In E-Series and G-series the range is 0..63. A value of 256 means that Traffic Class is not set. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.18 | ColumnaccessListVLANSpanRootTrack | read-create | current | The span root track option for VLAN redirects. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.19 | ColumnaccessListVLANUntagFilter | read-create | current | The filter for tagged or untagged backets to be applied |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.20 | ColumnaccessListVLANApplyMirror | read-create | current | This object shows that the traffic on the interface will be mirrored. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.21 | ColumnaccessListVLANStatistics | read-create | current | This object enables statistics on the interface. |
| 1.3.6.1.4.1.738.1.6.1.1.4.1.1.22 | ColumnaccessListVLANDirection | read-create | current | This object determines the ingress-egress type of applied ACL. |
| 1.3.6.1.4.1.738.1.6.1.1.5 | NodeaccessListsServices | |||
| 1.3.6.1.4.1.738.1.6.1.1.5.1 | TableaccessListSapTable | not-accessible | current | This table controls the assigment of access groups to a SAP. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1 | RowaccessListSapEntry | not-accessible | current | An entry in the AccessListSapEntry table. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.1 | ColumnaccessListSapTableIndex | not-accessible | current | This object identifies the row number for this (ifIndex) interface. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.2 | ColumnaccessListSapGroupIndex | not-accessible | current | This indicates the index of the access group for this interface. This value is the same as the value of accessListControlListGroup for the assigned ACL. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.3 | ColumnaccessListSapRowStatus | read-write | current | This indicates the row status & enables creation & deletion of lines in this (and related) tables. See SNMPv2-TC for more information. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.4 | ColumnaccessListSapRateLimit | read-write | current | The maximum rate in kBps(kilobytes per second) |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.5 | ColumnaccessListSapExceedAction | read-write | current | The action to perform when the condition is true. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.6 | ColumnaccessListSapBurst | read-write | current | The maximum Burst rate in kBps(kilobytes per second). This object is supported only by E-Series and G-series. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.7 | ColumnaccessListSapPeakRate | read-write | current | Peak Information Rate in kBps(kilobytes per second). |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.8 | ColumnaccessListSapPeakBurst | read-write | current | Peak Burst Size in kBps(kilobytes per second). |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.9 | ColumnaccessListSapColorAware | read-write | current | Toggle Color aware traffic metering. Disabled by default. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.10 | ColumnaccessListSapTxq | read-create | current | This object performs QoS and remarking of traffic matching an ACG |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.11 | ColumnaccessListSapTxqDropLevel | read-create | current | This object shows the drop-level (green/yellow) and is related to accessListInterfaceTxq. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.12 | ColumnaccessListSapStatistics | read-create | current | This object enables statistics on the SAP. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.13 | ColumnaccessListSapRateStatistics | read-create | current | This object enables rate statistics on the SAP. |
| 1.3.6.1.4.1.738.1.6.1.1.5.1.1.14 | ColumnaccessListSapDirection | read-create | current | This object determines the ingress-egress type of applied ACL. |
| 1.3.6.1.4.1.738.1.6.1.1.6 | NodeaccessListsInterfaceStatistics | |||
| 1.3.6.1.4.1.738.1.6.1.1.6.1 | TableaccessListInterfaceStatisticsTable | not-accessible | current | This table serves the interface statistics. |
| 1.3.6.1.4.1.738.1.6.1.1.6.1.1 | RowaccessListInterfaceStatisticsEntry | not-accessible | current | An entry in the accessListInterfaceStatisticsTable table. |
| 1.3.6.1.4.1.738.1.6.1.1.6.1.1.1 | ColumnaccessListInterfaceStatisticsGroupIndex | not-accessible | current | This indicates the index of the access group for this interface. This value is the same as the value of accessListControlListGroup for the assigned ACL. |
| 1.3.6.1.4.1.738.1.6.1.1.6.1.1.2 | ColumnaccessListInterfaceGreenBytes | read-only | current | This object shows green traffic in bytes for access group with enabled rate-limit statistics. |
| 1.3.6.1.4.1.738.1.6.1.1.6.1.1.3 | ColumnaccessListInterfaceYellowBytes | read-only | current | This object shows yellow traffic in bytes for access group with enabled rate-limit statistics. |
| 1.3.6.1.4.1.738.1.6.1.1.6.1.1.4 | ColumnaccessListInterfaceRedBytes | read-only | current | This object shows red traffic in bytes for access group with enabled rate-limit statistics. |
| 1.3.6.1.4.1.738.1.6.1.1.6.1.1.5 | ColumnaccessListInterfaceClassifiedPackets | read-only | current | This object shows match classified packets in bytes for access group with enabled statistics. |
| 1.3.6.1.4.1.738.1.6.1.1.7 | NodeaccessListsServicesStatistics | |||
| 1.3.6.1.4.1.738.1.6.1.1.7.1 | TableaccessListSapStatisticsTable | not-accessible | current | This table serves the Sap statistics. |
| 1.3.6.1.4.1.738.1.6.1.1.7.1.1 | RowaccessListSapStatisticsEntry | not-accessible | current | An entry in the accessListSapStatisticsTable table. |
| 1.3.6.1.4.1.738.1.6.1.1.7.1.1.1 | ColumnaccessListSapStatisticsGroupIndex | not-accessible | current | This indicates the index of the access group for this Sap. This value is the same as the value of accessListControlListGroup for the assigned ACL. |
| 1.3.6.1.4.1.738.1.6.1.1.7.1.1.2 | ColumnaccessListSapGreenBytes | read-only | current | This object shows green traffic in bytes for access group with enabled rate-limit statistics. |
| 1.3.6.1.4.1.738.1.6.1.1.7.1.1.3 | ColumnaccessListSapYellowBytes | read-only | current | This object shows yellow traffic in bytes for access group with enabled rate-limit statistics. |
| 1.3.6.1.4.1.738.1.6.1.1.7.1.1.4 | ColumnaccessListSapRedBytes | read-only | current | This object shows red traffic in bytes for access group with enabled rate-limit statistics. |
| 1.3.6.1.4.1.738.1.6.1.1.7.1.1.5 | ColumnaccessListSapClassifiedPackets | read-only | current | This object shows classified packets in bytes for access group with enabled match statistics. |
| 1.3.6.1.4.1.738.1.6.1.2 | Nodeisp | |||
| 1.3.6.1.4.1.738.1.6.1.2.1 | TableispUpLinkTable | not-accessible | current | This table controls the ISP up-links. This table is supported only by B-Series. |
| 1.3.6.1.4.1.738.1.6.1.2.1.1 | RowispUpLinkEntry | not-accessible | current | An entry in the ispUpLinkTable table. |
| 1.3.6.1.4.1.738.1.6.1.2.1.1.1 | ColumnispUpLinkIndex | not-accessible | current | The ISP index. |
| 1.3.6.1.4.1.738.1.6.1.2.1.1.2 | ColumnispUpLinkIfIndex | read-create | current | The ifIndex (from RFC1213) that this ISP belongs to. |
| 1.3.6.1.4.1.738.1.6.1.2.1.1.3 | ColumnispUpLinkType | read-create | current | The ispUpLinkType object shows if the ISP is connective or normal. |
| 1.3.6.1.4.1.738.1.6.1.2.1.1.4 | ColumnispUpLinkAccessGroup | read-write | current | A valid index (accessListControlListGroup) from accessListControlTable. For the ISP up-link the index groups are 100..199. |
| 1.3.6.1.4.1.738.1.6.1.2.1.1.5 | ColumnispUpLinkVLANid | read-create | current | The VID for this link. 0 means no VID. |
| 1.3.6.1.4.1.738.1.6.1.2.1.1.6 | ColumnispUpLinkVLANtag | read-create | current | Type of the VLAN - tagged or untagged. |
| 1.3.6.1.4.1.738.1.6.1.2.1.1.7 | ColumnispUpLinkRowStatus | read-write | current | This indicates the row status and enables creation & deletion of rows in this and related tables. See SNMPv2-TC for more information. |
| 1.3.6.1.4.1.738.1.6.1.2.2 | TableispUserInterfaceTable | not-accessible | current | This table controls the assignment of ISP users to an interface. This table is supported only by B-Series. |
| 1.3.6.1.4.1.738.1.6.1.2.2.1 | RowispUserInterfaceEntry | not-accessible | current | An entry in the ispUserInterfaceTable table. |
| 1.3.6.1.4.1.738.1.6.1.2.2.1.1 | ColumnispUserInterfaceAssigen | read-write | current | Indicates if an ISP user is assigned to this interface. |
| 1.3.6.1.4.1.738.1.6.1.2.2.1.2 | ColumnispUserInterfaceIspUplinkIndex | read-create | current | A valid index from ispUpLinkTable. |
| 1.3.6.1.4.1.738.1.6.1.2.2.1.3 | ColumnispUserInterfaceRateLimit | read-write | current | The maximum rate. |
| 1.3.6.1.4.1.738.1.6.1.2.2.1.4 | ColumnispUserInterfaceConformAction | read-write | current | The action to perform when the condition is true. |
| 1.3.6.1.4.1.738.1.6.1.2.2.1.5 | ColumnispUserInterfaceExceedAction | read-write | current | The action to perform when the condition is true. |
| 1.3.6.1.4.1.738.1.6.1.2.2.1.6 | ColumnispUserInterfaceShaper | read-write | current | This object controls the status of the shaper. |
| 1.3.6.1.4.1.738.1.6.1.3 | NodeprvtSwitchAccessListConformance | |||
| 1.3.6.1.4.1.738.1.6.1.3.1 | NodeprvtSwitchAccessListMibGroups | |||
| 1.3.6.1.4.1.738.1.6.1.3.1.1 | GroupprvtSwitchAccessListNotificationGroup | current | Private Notification Group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AccessListAction | INTEGER { permit(0), deny(1), shaper(2), remark(3), undefined(100) } | current | The AccessListAction type represents action taken when this access-list condition are asserted. |
| AccessListDirection | INTEGER { ingress (0), egress (1) } | current | Access list applied direction values |
| AccessListDiscard | INTEGER { normal(0), discardable(1), green(2), yellow(3), red(4), undefined(5) } | current | Mark discardable or normal for priority on access group Only the E-Series family and the G-Series family boards support the values green, yellow and red. Other values are not supported by the E-Series and G-series. |
| AccessListEstablished | INTEGER { enable (1), disable (0) } | current | Match established connection (ACK or RST flages) |
| AccessListModifyTos | INTEGER { enable (1), disable (0) } | current | The AccessListModifyTos must be enabled if the user wants the ToS to be modified. |
| AccessListRemarkString | OCTET STRING (SIZE (0..40)) | current | Access list entry comment string |
| AccessListStatistics | INTEGER { enable (1), disable (0) } | current | Access list statistics values |
| AssigenValue | INTEGER { enable (1), disable (2) } | current | Enables/disables assignment of an ISP user to this interface. |
| ConformAction | INTEGER { transmit (0) } | current | The action to perform if the condition is matched. |
| ExceedAction | INTEGER { drop(0), markDiscardable(1), undefined(2), green(3), yellow(4), red(5) } | current | the ExceedAction type represents the action that the switch should take when one of the limits exceeded: drop -> drop the packets, markDiscardable this packet is discardable if a conjection ocure Only the E-Series famil… |
| IpProtocol | INTEGER (0..255) | current | The IpProtocol type represents the protocol number in the IP datagram header |
| ISPType | INTEGER { connectivity (0), normal (1), routed (2) } | current | The ISPType type represents the ISP type - either connective or normal. |
| MatchTraffic | INTEGER { undefined(0), untagged(1), unknown-unicast(2), multicast(3), broadcast(4), known-unicast(5) } | current | Match traffic values |
| PortDef | INTEGER { equal(1), range(2), greater-than(3), less-than(4), undefined(0) } | current | The PortDef type operates together with the port number filed inside the access-list & control how the port number is being processed. The values greater-than(3) and less-than(4) are supported only on E-Series family bo… |
| Rate | INTEGER (0|13..1000000) | current | The Rate type represents in Kbps the maximum rate limit for the flow |
| Shaper | INTEGER { disable (0), enable (1) } | current | The Shaper type represents the status of the shaper |
| TxqDropLevel | INTEGER { undefined(0), green(1), yellow(2) } | current | TXQ drop level values |
| VlanTag | INTEGER { untagged (0), tagged (1), undefined (2) } | current | The VlanTag type represents if the VLAN is tagged or untagged. |