PRVT-TE-PARAM-MIB
59 objects
The MIB module for management of TE-params entities.
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| PRVT-CR-LDP-MIB | mpls |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.1.6.5.9 | IdentityprvtTeParamMib | The MIB module for management of TE-params entities. | ||
| 1.3.6.1.4.1.738.1.6.5.9.0 | NodeprvtTeParamMibNotifications | |||
| 1.3.6.1.4.1.738.1.6.5.9.1 | NodeprvtTeParamMibObjects | |||
| 1.3.6.1.4.1.738.1.6.5.9.1.1 | ScalarospfOpaqueEngSupport | read-write | current | Controls ospf opaque support. |
| 1.3.6.1.4.1.738.1.6.5.9.1.2 | ScalarospfTeRouterId | read-write | current | Traffic engineering router ID. |
| 1.3.6.1.4.1.738.1.6.5.9.1.3 | ScalarospfTrafficEngSupport | read-write | current | Controls traffic engeneering support. Read-only for current implementation. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4 | TableprvtTeParamTable | not-accessible | current | A list of ip interface entries. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1 | RowprvtTeParamEntry | not-accessible | current | An entry in this table exists for each entry from ipInterfaceTable. An ipInterfaceEntry in the ipInterfaceTable must exist. If a ip interface entry in the ipIn… |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.1 | ColumnprvtTeParamLinkAddressType | read-only | current | The type of Internet address for the TE link. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.2 | ColumnprvtTeParamMetric | read-write | current | The traffic engineering metric for the TE link is derived from its component links. All component links within the TE link must have the same traffic engineeri… |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.3 | ColumnprvtTeParamLinkType | read-only | current | This indicates the type of the link such as point-to-point or multi-access |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.4 | ColumnprvtTeParamPhysicalBandwidth | read-write | current | Physical bandwidth for the TE link. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.5 | ColumnprvtTeParamMaximumReservableBandwidth | read-write | current | Maximum reservable bandwidth for the TE link. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.6 | ColumnprvtTeParamMaxReservableBandwidthPrio0 | read-write | current | Maximum reservable bandwidth for the TE link with priority 0. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.7 | ColumnprvtTeParamMaxReservableBandwidthPrio1 | read-write | current | Maximum reservable bandwidth for the TE link with priority 1. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.8 | ColumnprvtTeParamMaxReservableBandwidthPrio2 | read-write | current | Maximum reservable bandwidth for the TE link with priority 2. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.9 | ColumnprvtTeParamMaxReservableBandwidthPrio3 | read-write | current | Maximum reservable bandwidth for the TE link with priority 3. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.10 | ColumnprvtTeParamMaxReservableBandwidthPrio4 | read-write | current | Maximum reservable bandwidth for the TE link with priority 4. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.11 | ColumnprvtTeParamMaxReservableBandwidthPrio5 | read-write | current | Maximum reservable bandwidth for the TE link with priority 5. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.12 | ColumnprvtTeParamMaxReservableBandwidthPrio6 | read-write | current | Maximum reservable bandwidth for the TE link with priority 6. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.13 | ColumnprvtTeParamMaxReservableBandwidthPrio7 | read-write | current | Maximum reservable bandwidth for the TE link with priority 7. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.14 | ColumnprvtTeParamReservedBandwidthPrio0 | read-only | current | Reserved bandwidth for the TE link with priority 0. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.15 | ColumnprvtTeParamReservedBandwidthPrio1 | read-only | current | Reserved bandwidth for the TE link with priority 1. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.16 | ColumnprvtTeParamReservedBandwidthPrio2 | read-only | current | Reserved bandwidth for the TE link with priority 2. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.17 | ColumnprvtTeParamReservedBandwidthPrio3 | read-only | current | Reserved bandwidth for the TE link with priority 3. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.18 | ColumnprvtTeParamReservedBandwidthPrio4 | read-only | current | Reserved bandwidth for the TE link with priority 4. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.19 | ColumnprvtTeParamReservedBandwidthPrio5 | read-only | current | Reserved bandwidth for the TE link with priority 5. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.20 | ColumnprvtTeParamReservedBandwidthPrio6 | read-only | current | Reserved bandwidth for the TE link with priority 6. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.21 | ColumnprvtTeParamReservedBandwidthPrio7 | read-only | current | Reserved bandwidth for the TE link with priority 7. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.22 | ColumnprvtTeParamUnreservedBandwidthPrio0 | read-only | current | Unreserved bandwidth for the TE link with priority 0. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.23 | ColumnprvtTeParamUnreservedBandwidthPrio1 | read-only | current | Unreserved bandwidth for the TE link with priority 1. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.24 | ColumnprvtTeParamUnreservedBandwidthPrio2 | read-only | current | Unreserved bandwidth for the TE link with priority 2. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.25 | ColumnprvtTeParamUnreservedBandwidthPrio3 | read-only | current | Unreserved bandwidth for the TE link with priority 3. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.26 | ColumnprvtTeParamUnreservedBandwidthPrio4 | read-only | current | Unreserved bandwidth for the TE link with priority 4. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.27 | ColumnprvtTeParamUnreservedBandwidthPrio5 | read-only | current | Unreserved bandwidth for the TE link with priority 5. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.28 | ColumnprvtTeParamUnreservedBandwidthPrio6 | read-only | current | Unreserved bandwidth for the TE link with priority 6. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.29 | ColumnprvtTeParamUnreservedBandwidthPrio7 | read-only | current | Unreserved bandwidth for the TE link with priority 7. |
| 1.3.6.1.4.1.738.1.6.5.9.1.4.1.30 | ColumnprvtTeParamResourceClass | read-write | current | This attribute specifies the TE link resource class. The resource class is a 32 bit bitfield. The resource class for a link bundle is derived from the resource… |
| 1.3.6.1.4.1.738.1.6.5.9.1.5 | TableprvtTeParamAdminGroupTable | not-accessible | current | Table for administrative groups manipulation. |
| 1.3.6.1.4.1.738.1.6.5.9.1.5.1 | RowprvtTeParamAdminGroupEntry | not-accessible | current | prvtTeParamAdminGroupTable allows specifiying of a group-name to each existing administrative group. Each group is uniquely identified by its prvtTeParamAdminG… |
| 1.3.6.1.4.1.738.1.6.5.9.1.5.1.1 | ColumnprvtTeParamAdminGroupId | read-only | current | The prvtTeParamAdminGroupId object uniquely identifes an administrative group. Supported are 32 administrative groups. |
| 1.3.6.1.4.1.738.1.6.5.9.1.5.1.2 | ColumnprvtTeParamAdminGroupName | read-write | current | The prvtTeParamAdminGroupId object specifies the administrative group name. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6 | TableprvtCspfStatisticsTable | not-accessible | current | Table containing the statistics relating to the running CSPF. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1 | RowprvtCspfStatisticsEntry | not-accessible | current | Each entry contains the statistics relating to the running CSPF. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.1 | ColumnprvtCspfEntIndex | not-accessible | current | Identifies a CSPF entity. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.2 | ColumnprvtCspfStatNumRtQueries | read-only | current | The number of ATG_QCTE_QUERY_CSPF_ROUTE queries sent in to this CSPF process. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.3 | ColumnprvtCspfStatNumRtsClcd | read-only | current | The number of routes successfully calculated by this CSPF process. This statistic is incremented for each positive response to an ATG_QCTE_QUERY_CSPF_ROUTE que… |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.4 | ColumnprvtCspfStatNumRtsInCache | read-only | current | The number of SPF trees currently stored in the cache. Each tree corresponds to a different set of constraints. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.5 | ColumnprvtCspfStatNumUpdatesRcvd | read-only | current | The number of database updates signals that have been received by this CSPF process, to indicate a new, updated or deleted database entry. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.6 | ColumnprvtCspfStatNumEntriesDeleted | read-only | current | The number of Database updates signals that have been received by this CSPF process to indicate a database entry to delete. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.7 | ColumnprvtCspfStatNumLinkEntries | read-only | current | The number of entries stored in the CSPF database for Traffic Engineering links. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.8 | ColumnprvtCspfStatNumNetworkEntries | read-only | current | The number of entries stored in the CSPF database for networks. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.9 | ColumnprvtCspfStatNumReturnedCaches | read-only | current | The number of queries that have been satisfied through returning a route stored in the cache. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.10 | ColumnprvtCspfStatNumBkupQueries | read-only | current | The number of queries that have requested a backup path. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.11 | ColumnprvtCspfStatNumBkupPathsFound | read-only | current | The number of queries that have been returned with a backup path successfully calculated. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.12 | ColumnprvtCspfStatNumRouteUpdates | read-only | current | The number of incremental route updates which have been made to routes held in the cache. |
| 1.3.6.1.4.1.738.1.6.5.9.1.6.1.13 | ColumnprvtCspfStatNumDiscardedRoutes | read-only | current | The number of routes which have been discarded from the cache due to new TE information being received. |
| 1.3.6.1.4.1.738.1.6.5.9.2 | NodeprvtTeParamMibConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TeLinkBandwidth | OCTET STRING (SIZE(4)) | current | This type is used to represent link bandwidth in bps. This value is represented using a 4 octet IEEE floating point format [IEEE]. The floating point representation is not used to represent fractional value but rather t… |