PT-RADIOLINK-MIB
133 objects
This is the MIB for Radio Link specifics in PT
Imported Objects
| IF-MIB | ifEntry |
| INET-ADDRESS-MIB | InetAddressIPv6 |
| PT-MIB | pt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.223.2.7 | IdentityptRadioLink | This is the MIB for Radio Link specifics in PT | ||
| 1.3.6.1.4.1.193.223.2.7.1 | TablectTable | not-accessible | current | A table of CT Table entries. |
| 1.3.6.1.4.1.193.223.2.7.1.1 | RowctEntry | not-accessible | current | An entry of CT application. |
| 1.3.6.1.4.1.193.223.2.7.1.1.1 | ColumnactualInputPower | read-only | current | Actual input power of the CT in dBm |
| 1.3.6.1.4.1.193.223.2.7.1.1.2 | ColumnactualOutputPower | read-only | current | Actual output power of the CT in dBm |
| 1.3.6.1.4.1.193.223.2.7.1.1.3 | ColumnactualRxAcm | read-only | current | Actual rx modulation and coding |
| 1.3.6.1.4.1.193.223.2.7.1.1.4 | ColumnactualTxAcm | read-only | current | Actual tx modulation and coding |
| 1.3.6.1.4.1.193.223.2.7.1.1.5 | ColumnctDistinguishedName | read-only | current | Unique id/name of the carrier termination, according to FDN (rack/slot/port/class) |
| 1.3.6.1.4.1.193.223.2.7.1.1.6 | Columndescription | read-write | current | User description of the carrior termination. |
| 1.3.6.1.4.1.193.223.2.7.1.1.7 | ColumncarrierId | read-write | current | Id of the carrier. (A, B, C, D) Used in XPIC & MIMO configurations to check that the carrier termination is connected to the correct far end carrier terminatio… |
| 1.3.6.1.4.1.193.223.2.7.1.1.8 | ColumnctStatus | read-only | current | The status of the carrier termination, hop |
| 1.3.6.1.4.1.193.223.2.7.1.1.9 | ColumnframeId | read-write | current | A unique identifier for the radio frame to be used. Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid c… |
| 1.3.6.1.4.1.193.223.2.7.1.1.10 | ColumntxFrequency | read-write | current | Selected frequency on the transmitter (kHz). Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combinat… |
| 1.3.6.1.4.1.193.223.2.7.1.1.11 | ColumnminTxFrequency | read-only | current | Minimum Tx frequency possible to use, given by the selected frame-id |
| 1.3.6.1.4.1.193.223.2.7.1.1.12 | ColumnmaxTxFrequency | read-only | current | Maximum Tx frequency possible to use, given by the selected frame-id |
| 1.3.6.1.4.1.193.223.2.7.1.1.13 | ColumnrxFrequency | read-write | current | Selected frequency on the receiver (kHz). Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination. |
| 1.3.6.1.4.1.193.223.2.7.1.1.14 | ColumnminRxFrequency | read-only | current | Minimum Rx frequency possible to use, given by the selected frame-id |
| 1.3.6.1.4.1.193.223.2.7.1.1.15 | ColumnmaxRxFrequency | read-only | current | Maximum Rx frequency possible to use, given by the selected frame-id |
| 1.3.6.1.4.1.193.223.2.7.1.1.16 | ColumnfrequencyStepSize | read-only | current | Frequency step size in kHz |
| 1.3.6.1.4.1.193.223.2.7.1.1.17 | ColumnduplexDistance | read-only | current | Distance between Tx and Rx frequencies (kHz) |
| 1.3.6.1.4.1.193.223.2.7.1.1.18 | ColumnduplexType | read-only | current | The duplex type is given by the equipment (Fixed,Variable) |
| 1.3.6.1.4.1.193.223.2.7.1.1.19 | ColumnduplexConfig | read-write | current | Enabling or disabling configuration of Rx freq using duplex distance |
| 1.3.6.1.4.1.193.223.2.7.1.1.20 | ColumnautoFreqSelection | read-write | current | Automatic frequency selection mode |
| 1.3.6.1.4.1.193.223.2.7.1.1.21 | ColumnautoFreqSelectedChannel | read-write | current | Automatic frequency selected channel |
| 1.3.6.1.4.1.193.223.2.7.1.1.22 | ColumnautoFreqSelectionStatus | read-only | current | Automatic frequency status |
| 1.3.6.1.4.1.193.223.2.7.1.1.23 | ColumnchannelSpacing | read-only | current | Channel spacing |
| 1.3.6.1.4.1.193.223.2.7.1.1.24 | Columnpolarization | read-write | current | Antenna polarization |
| 1.3.6.1.4.1.193.223.2.7.1.1.25 | ColumntxOperStatus | read-only | current | Operative status of the transmitter |
| 1.3.6.1.4.1.193.223.2.7.1.1.26 | ColumntxAdminStatus | read-write | current | Administrative status of the transmitter |
| 1.3.6.1.4.1.193.223.2.7.1.1.27 | ColumnselectedOutputPowerType | read-write | current | Selected output power type |
| 1.3.6.1.4.1.193.223.2.7.1.1.28 | ColumnavailableOutputPowerType | read-write | current | Available output power type |
| 1.3.6.1.4.1.193.223.2.7.1.1.29 | ColumnselectedMinOutputPower | read-write | current | Selected min output power. Selected min & max output power should be set to the same value for RTPC mode, otherwise the hop operates in ATPC mode. |
| 1.3.6.1.4.1.193.223.2.7.1.1.30 | ColumnselectedMaxOutputPower | read-write | current | Selected max output power. Selected min & max output power should be set to the same value for RTPC mode, otherwise the hop operates in ATPC mode. |
| 1.3.6.1.4.1.193.223.2.7.1.1.31 | ColumnavailableMinOutputPower | read-only | current | The minimum output power supported (dBm). The system shows a value if the equipment is available and a frame id has been selected. |
| 1.3.6.1.4.1.193.223.2.7.1.1.32 | ColumnavailableMaxOutputPower | read-only | current | The maximum output power supported (dBm). The system shows a value if the equipment is available and a frame id has been selected. |
| 1.3.6.1.4.1.193.223.2.7.1.1.33 | ColumnreferenceSec | read-write | current | Each modulation is compliant to a Reference Spectrum Efficiency Class (RSEC). When running Adaptive Coding/Modulation, one SEC has to be selected for all the c… |
| 1.3.6.1.4.1.193.223.2.7.1.1.34 | ColumntargetInputPowerFarEnd | read-write | current | The wanted input power at far end (dBm), when running ATPC |
| 1.3.6.1.4.1.193.223.2.7.1.1.35 | ColumnberAlarmThreshold | read-write | current | Threshold for the BER alarm |
| 1.3.6.1.4.1.193.223.2.7.1.1.36 | ColumninputPowerAlarmThreshold | read-write | current | Threshold for the input power alarm |
| 1.3.6.1.4.1.193.223.2.7.1.1.37 | ColumnplannedAlignmentInputPower | read-write | current | The planned received input power (dBm) dependent upon selected minimum ACM and corresponding output power. Used when doing alignment |
| 1.3.6.1.4.1.193.223.2.7.1.1.38 | ColumnatpcFallback | read-write | current | Enable or disable the output power fall back function |
| 1.3.6.1.4.1.193.223.2.7.1.1.39 | ColumnatpcFallbackTimer | read-write | current | Specifies the timer for output power fall back (# of seconds) |
| 1.3.6.1.4.1.193.223.2.7.1.1.40 | ColumnatpcFallbackOutputPower | read-write | current | The ATPC fallback output power |
| 1.3.6.1.4.1.193.223.2.7.1.1.41 | ColumnxpicStatus | read-only | current | Status of the XPIC function. |
| 1.3.6.1.4.1.193.223.2.7.1.1.42 | ColumnmimoStatus | read-only | current | Status of the MIMO function. |
| 1.3.6.1.4.1.193.223.2.7.1.1.43 | ColumnactualSnir | read-only | current | Actual signal to noise plus interference ratio (dB). |
| 1.3.6.1.4.1.193.223.2.7.1.1.44 | ColumnactualXpi | read-only | current | The carrier to cross-polar interference level (dBc). |
| 1.3.6.1.4.1.193.223.2.7.1.1.45 | ColumnactualSi | read-only | current | Spatial interference between the CTs when MIMO is configured. |
| 1.3.6.1.4.1.193.223.2.7.1.1.46 | ColumnactualTxCapacity | read-only | current | Actual capacity supported by the carrier termination. |
| 1.3.6.1.4.1.193.223.2.7.1.1.47 | ColumnlicensedCapacity | read-only | current | Wanted or installed license for the capacity allowed for the carrier termination. |
| 1.3.6.1.4.1.193.223.2.7.1.1.48 | ColumnavailableMinCapacity | read-only | current | Minimum capacity possible to use. Given by the selected frame-id (kbit/s) |
| 1.3.6.1.4.1.193.223.2.7.1.1.49 | ColumnavailableMaxCapacity | read-only | current | Maximum capacity possible to use. Given by the selected frame-id (kbit/s) |
| 1.3.6.1.4.1.193.223.2.7.1.1.50 | ColumnselectedMinCapacity | read-only | current | Selected minimum capacity, derived from selected minimum ACM (kbit/s) |
| 1.3.6.1.4.1.193.223.2.7.1.1.51 | ColumnselectedMaxCapacity | read-only | current | Selected maximum capacity, derived from selected maximum ACM (kbit/s) |
| 1.3.6.1.4.1.193.223.2.7.1.1.52 | ColumnwantedLicensedCapacity | read-write | current | Wanted licensed capacity and creation of LRF for the carrier termination (kbit/s) |
| 1.3.6.1.4.1.193.223.2.7.1.1.53 | ColumnavailableMinAcm | read-only | current | Minimum ACM possible to use, given by the selected frame id. |
| 1.3.6.1.4.1.193.223.2.7.1.1.54 | ColumnavailableMaxAcm | read-only | current | Maximum ACM possible to use, given by the selected frame id |
| 1.3.6.1.4.1.193.223.2.7.1.1.55 | ColumnselectedMinAcm | read-write | current | Selected minimum coding/modulation. If selectedMinACM = selectedMaxACM, then the modulation is fixed |
| 1.3.6.1.4.1.193.223.2.7.1.1.56 | ColumnselectedMaxAcm | read-write | current | Selected maximum coding/modulation. If selectedMinACM = selectedMaxACM, then the modulation is fixed |
| 1.3.6.1.4.1.193.223.2.7.1.1.57 | ColumnactualRxAcmTC | read-only | current | Actual rx modulation and coding |
| 1.3.6.1.4.1.193.223.2.7.1.1.58 | ColumnactualTxAcmTC | read-only | current | Actual tx modulation and coding |
| 1.3.6.1.4.1.193.223.2.7.1.1.59 | ColumnalignmentMode | read-write | current | Enable or disable the alignment mode |
| 1.3.6.1.4.1.193.223.2.7.1.1.60 | ColumnrfLoop | read-write | current | Enable or disable the rf loop |
| 1.3.6.1.4.1.193.223.2.7.2 | NodeptRadioLinkConformance | |||
| 1.3.6.1.4.1.193.223.2.7.2.1 | NodeptRadioLinkCompliances | |||
| 1.3.6.1.4.1.193.223.2.7.2.1.1 | ComplianceptRadioLinkFullCompliance | current | The compliance statement for SNMP entities which implement everything. | |
| 1.3.6.1.4.1.193.223.2.7.2.2 | NodeptRadioLinkGroups | |||
| 1.3.6.1.4.1.193.223.2.7.2.2.1 | GroupptRadioLinkCompleteGroup | current | A collection of all current objects in this MIB module. | |
| 1.3.6.1.4.1.193.223.2.7.3 | TablerltTable | not-accessible | current | A table of RLT Table entries. |
| 1.3.6.1.4.1.193.223.2.7.3.1 | RowrltEntry | not-accessible | current | An entry of RLT application. |
| 1.3.6.1.4.1.193.223.2.7.3.1.1 | ColumnrltDistinguishedName | read-only | current | Unique id/name of the radio link termination, according to FDN (rack/slot/port/class) |
| 1.3.6.1.4.1.193.223.2.7.3.1.2 | ColumnneIpAddress | read-only | current | NE IP address |
| 1.3.6.1.4.1.193.223.2.7.3.1.3 | ColumnneIpv6Address | read-only | current | NE IP V6 address |
| 1.3.6.1.4.1.193.223.2.7.3.1.4 | ColumnneName | read-only | current | NE Name |
| 1.3.6.1.4.1.193.223.2.7.3.1.5 | ColumnneType | read-only | current | NE Type |
| 1.3.6.1.4.1.193.223.2.7.3.1.6 | Columnid | read-write | current | User defined id of the radio link terminal |
| 1.3.6.1.4.1.193.223.2.7.3.1.7 | ColumnrltStatus | read-only | current | The status of the radio link terminal |
| 1.3.6.1.4.1.193.223.2.7.3.1.8 | Columnmode | read-write | current | The status of the radio link terminal |
| 1.3.6.1.4.1.193.223.2.7.3.1.9 | ColumnactualTxTotalCapacity | read-only | current | Actual aggregated total (packet + TDM) transmitter capacity for the radio link termination. Limited by licenses & configuration (=nearEndLimitedCapacity) and d… |
| 1.3.6.1.4.1.193.223.2.7.3.1.10 | ColumnlimitedTotalCapacity | read-only | current | Maximum total capacity allowed by the current configuration and installed licenses. Aggregated from the constituent carrier termination values. |
| 1.3.6.1.4.1.193.223.2.7.3.1.11 | ColumnprotectionStatus | read-only | current | Status of a protected node. |
| 1.3.6.1.4.1.193.223.2.7.3.1.12 | ColumnrevertiveWaitToRestore | read-write | current | The time, in number of seconds, to wait before switching back to the preferred Tx. |
| 1.3.6.1.4.1.193.223.2.7.3.1.13 | ColumnrevertivePreferredTx | read-write | current | The preferred carrier termination transmitter. |
| 1.3.6.1.4.1.193.223.2.7.3.1.14 | ColumnprotectionSwitchMode | read-write | current | .The mode in which the switching mechanism is configured |
| 1.3.6.1.4.1.193.223.2.7.3.1.15 | ColumnfadeNotificationTimer | read-write | current | Notification is sent if fading is longer than this timer, applicable for protection. |
| 1.3.6.1.4.1.193.223.2.7.3.1.16 | ColumnexpectedFarEndId | read-write | current | Expected id of far-end terminal |
| 1.3.6.1.4.1.193.223.2.7.3.1.17 | ColumnfarEndIdCheck | read-write | current | Enabling of far end id check. |
| 1.3.6.1.4.1.193.223.2.7.3.1.18 | ColumncpriMode | read-write | current | Set the mode of the CPRI front-haul product. |
| 1.3.6.1.4.1.193.223.2.7.3.1.19 | ColumncpriStatus | read-only | current | The status of the CPRI front-haul product. |
| 1.3.6.1.4.1.193.223.2.7.3.1.20 | ColumnmanualSwitch | read-write | current | Manual switch of protected carrier termination transmitter. |
| 1.3.6.1.4.1.193.223.2.7.3.1.21 | ColumnmlhcOperStatus | read-only | current | Operative status of multi layer header compression. |
| 1.3.6.1.4.1.193.223.2.7.3.1.22 | ColumnmlhcAdminStatus | read-write | current | Administrative status of multi layer header compression. |
| 1.3.6.1.4.1.193.223.2.7.3.1.23 | ColumnmlhcMplsConfig | read-write | current | MLHC/MPLS configuration. |
| 1.3.6.1.4.1.193.223.2.7.3.1.24 | ColumnplcOperStatus | read-only | current | Operative status of payload compression. |
| 1.3.6.1.4.1.193.223.2.7.3.1.25 | ColumnplcAdminStatus | read-write | current | Administrative status of payload compression. |
| 1.3.6.1.4.1.193.223.2.7.4 | NodectPerformance | |||
| 1.3.6.1.4.1.193.223.2.7.4.1 | TablectG826ContinuousTable | not-accessible | current | A table of CT G826 Performance Continuous counters entries. The counters are reset by ctG826Reset |
| 1.3.6.1.4.1.193.223.2.7.4.1.1 | RowctG826ContinuousEntry | not-accessible | current | An entry of CT G826 Performance Continuous counters. |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.1 | ColumnctG826TimeElapsed | read-only | current | Time elapsed in seconds since last PMReset |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.2 | ColumnctBBE | read-only | current | Background Block Errors |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.3 | ColumnctBBER | read-only | current | Background Block Errors Ratio |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.4 | ColumnctES | read-only | current | Error seconds |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.5 | ColumnctESR | read-only | current | Error seconds Ratio |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.6 | ColumnctSES | read-only | current | Severely error seconds |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.7 | ColumnctSESR | read-only | current | Severely error seconds Ratio |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.8 | ColumnctBB | read-only | current | Background blocks |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.9 | ColumnctUAS | read-only | current | Unavailable seconds |
| 1.3.6.1.4.1.193.223.2.7.4.1.1.10 | ColumnctG826Reset | read-write | current | Reset the continuous PM counters |
| 1.3.6.1.4.1.193.223.2.7.4.2 | TablectG826Current15mTable | not-accessible | current | A table of CT Performance G826 15 m current counters Table entries. |
| 1.3.6.1.4.1.193.223.2.7.4.2.1 | RowctG826Current15mEntry | not-accessible | current | An entry of CT Performance G826 15 m current Table counters. |
| 1.3.6.1.4.1.193.223.2.7.4.2.1.1 | ColumnctG826Current15mTimeElapsed | read-only | current | Time elapsed in seconds since last PMReset |
| 1.3.6.1.4.1.193.223.2.7.4.2.1.2 | ColumnctCurrent15mBBE | read-only | current | Background Block Errors |
| 1.3.6.1.4.1.193.223.2.7.4.2.1.3 | ColumnctCurrent15mBBER | read-only | current | Background Block Errors Ratio |
| 1.3.6.1.4.1.193.223.2.7.4.2.1.4 | ColumnctCurrent15mES | read-only | current | Error seconds |
| 1.3.6.1.4.1.193.223.2.7.4.2.1.5 | ColumnctCurrent15mESR | read-only | current | Error seconds Ratio |
| 1.3.6.1.4.1.193.223.2.7.4.2.1.6 | ColumnctCurrent15mSES | read-only | current | Severely error seconds |
| 1.3.6.1.4.1.193.223.2.7.4.2.1.7 | ColumnctCurrent15mSESR | read-only | current | Severely error seconds Ratio |
| 1.3.6.1.4.1.193.223.2.7.4.2.1.8 | ColumnctCurrent15mBB | read-only | current | Background blocks |
| 1.3.6.1.4.1.193.223.2.7.4.2.1.9 | ColumnctCurrent15mUAS | read-only | current | Unavailable seconds |
| 1.3.6.1.4.1.193.223.2.7.4.3 | TablectG826Current24hTable | not-accessible | current | A table of CT Performance G826 Current 24h counters entries. |
| 1.3.6.1.4.1.193.223.2.7.4.3.1 | RowctG826Current24hEntry | not-accessible | current | An entry of CT Performance G826 Current 24 h counters. |
| 1.3.6.1.4.1.193.223.2.7.4.3.1.1 | ColumnctG826Current24hTimeElapsed | read-only | current | Time elapsed in seconds since last PMReset |
| 1.3.6.1.4.1.193.223.2.7.4.3.1.2 | ColumnctCurrent24hBBE | read-only | current | Background Block Errors |
| 1.3.6.1.4.1.193.223.2.7.4.3.1.3 | ColumnctCurrent24hBBER | read-only | current | Background Block Errors Ratio |
| 1.3.6.1.4.1.193.223.2.7.4.3.1.4 | ColumnctCurrent24hES | read-only | current | Error seconds |
| 1.3.6.1.4.1.193.223.2.7.4.3.1.5 | ColumnctCurrent24hESR | read-only | current | Error seconds Ratio |
| 1.3.6.1.4.1.193.223.2.7.4.3.1.6 | ColumnctCurrent24hSES | read-only | current | Severely error seconds |
| 1.3.6.1.4.1.193.223.2.7.4.3.1.7 | ColumnctCurrent24hSESR | read-only | current | Severely error seconds Ratio |
| 1.3.6.1.4.1.193.223.2.7.4.3.1.8 | ColumnctCurrent24hBB | read-only | current | Background blocks |
| 1.3.6.1.4.1.193.223.2.7.4.3.1.9 | ColumnctCurrent24hUAS | read-only | current | Unavailable seconds |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AcmTC | INTEGER { acmHalfBpsk(1), acmHalfBpskLight(2), acmHalfBpskStrong(3), acmBpsk(4), acmBpskLight(5), acmBpskStrong(6), acm4Qam(7), acm4QamLight(8), acm4QamStrong(9), acm16Qam(10), acm16QamLight(11), acm16QamStrong(12), acm32Qam(13), acm32QamLight(14), acm32QamStrong(15), acm64Qam(16), acm64QamLight(17), acm64QamStrong(18), acm128Qam(19), acm128QamLight(20), acm128QamStrong(21), acm256Qam(22), acm256QamLight(23), acm256QamStrong(24), acm512Qam(25), acm512QamLight(26), acm512QamStrong(27), acm1024Qam(28), acm1024QamLight(29), acm1024QamStrong(30), acm2048Qam(31), acm2048QamLight(32), acm2048QamStrong(33), acm4096Qam(34), acm4096QamLight(35), acm4096QamStrong(36) } | current | An integer which indicates the ACM. |
| EnableStatusTC | INTEGER { enabled(1), disabled(2), unknown(3) } | current | An integer which indicates the enabled status. |
| XpicMimoTC | INTEGER { notAvailable(1), locked(2), unlocked(3), unknown(4) } | current | An integer which indicates the XPIC or MIMO status. |