MIB Viewer

PT3080-MIB

986 objects
This is the MIB file of PT3080 DVB-T/H Modulator. Copyright (c) 2008-2015 Protelevision Technologies A/S. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
Imported Objects
PT-MIBpt
SNMPv2-CONFAGENT-CAPABILITIES MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIInteger32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDateAndTime DisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.193.223.2.3080Identitypt3080This is the MIB file of PT3080 DVB-T/H Modulator. Copyright (c) 2008-2015 Protelevision Technologies A/S. All rights reserved. Reproduction of this document is…
1.3.6.1.4.1.193.223.2.3080.1Nodept3080System
1.3.6.1.4.1.193.223.2.3080.1.1Scalarpt3080SystemInstrumentKUread-onlycurrentThe instrument serial number.
1.3.6.1.4.1.193.223.2.3080.1.2Scalarpt3080SystemInstrumentTyperead-onlycurrentThe product type designation.
1.3.6.1.4.1.193.223.2.3080.1.3Scalarpt3080SystemInstrumentSWRevread-onlycurrentThe instrument Software Revision currently running.
1.3.6.1.4.1.193.223.2.3080.1.4Scalarpt3080SystemInstrumentBootLoaderRevread-onlycurrentThe instrument Bootloader Software Revision.
1.3.6.1.4.1.193.223.2.3080.1.5Scalarpt3080SystemInstrumentKernelRevread-onlycurrentThe instrument O/S Kernel Version.
1.3.6.1.4.1.193.223.2.3080.1.6Scalarpt3080SystemInstrumentOptionsread-onlycurrentThe options installed on this instrument.
1.3.6.1.4.1.193.223.2.3080.1.7Scalarpt3080SystemInstrumentFW1Revread-onlycurrentThe instrument FW1 revision
1.3.6.1.4.1.193.223.2.3080.1.8Scalarpt3080SystemInstrumentFW1RevBLread-onlycurrentThe instrument FW1 BL revision
1.3.6.1.4.1.193.223.2.3080.1.9Scalarpt3080SystemInstrumentFW2Revread-onlycurrentThe instrument FW2 revision
1.3.6.1.4.1.193.223.2.3080.1.10Scalarpt3080SystemInstrumentFW2RevBLread-onlycurrentThe instrument FW2 BL revision
1.3.6.1.4.1.193.223.2.3080.1.11Scalarpt3080SystemInstrumentFW3Revread-onlycurrentThe instrument FW3 revision
1.3.6.1.4.1.193.223.2.3080.1.12Scalarpt3080SystemInstrumentFW4Revread-onlycurrentThe instrument FW4 revision
1.3.6.1.4.1.193.223.2.3080.1.13Scalarpt3080SystemInstrumentPCBRevread-onlycurrentThe instrument PCB revision
1.3.6.1.4.1.193.223.2.3080.1.14Scalarpt3080SystemInstrumentCalibrationRevread-onlycurrentThe instrument Calibration revision
1.3.6.1.4.1.193.223.2.3080.1.15Scalarpt3080SystemInstrumentCalibrationDateread-onlycurrentThe instrument Calibration date
1.3.6.1.4.1.193.223.2.3080.1.16Scalarpt3080SystemRebootread-writecurrentForce a reboot of the device on the designated image now.
1.3.6.1.4.1.193.223.2.3080.1.19Scalarpt3080SystemRebootDefaultConfigread-writecurrentRestore all parameters to factory default and reboot the device on the same image.
1.3.6.1.4.1.193.223.2.3080.1.20Scalarpt3080SystemDateTimeSyncread-writecurrentThe method used to synchronize system RTC. Mode auto means use gps if available else ntp else manual.
1.3.6.1.4.1.193.223.2.3080.1.21Scalarpt3080SystemTimezoneread-writecurrentThe Time Zone used for displaying Data and Time.
1.3.6.1.4.1.193.223.2.3080.1.22Scalarpt3080SystemDateTimeread-writecurrentThe current date/time in local timezone of the device. Format is YYYY MM DD HH MM SS.
1.3.6.1.4.1.193.223.2.3080.1.23Scalarpt3080SystemCurrentImageread-onlycurrentThe flash Image the device is currently booted from.
1.3.6.1.4.1.193.223.2.3080.1.24Scalarpt3080SystemImage0Versionread-onlycurrentThe image 0 version string.
1.3.6.1.4.1.193.223.2.3080.1.25Scalarpt3080SystemImage0InstalledDateread-onlycurrentThe date and time image 0 was installed.
1.3.6.1.4.1.193.223.2.3080.1.26Scalarpt3080SystemImage1versionread-onlycurrentThe image 1 version string.
1.3.6.1.4.1.193.223.2.3080.1.27Scalarpt3080SystemImage1InstalledDateread-onlycurrentThe date and time image 0 was installed.
1.3.6.1.4.1.193.223.2.3080.1.28Scalarpt3080SystemServiceLEDread-writecurrentControl the Service LED on frontpanel.
1.3.6.1.4.1.193.223.2.3080.1.30Scalarpt3080SystemTyperead-writecurrentThe system type to start in on next reboot.
1.3.6.1.4.1.193.223.2.3080.1.31Scalarpt3080SystemDateTimeSyncActualread-onlycurrentThe actual method used to synchronize system RTC.
1.3.6.1.4.1.193.223.2.3080.1.32Scalarpt3080SystemModulationStandardread-writecurrentThe Modulation Standard to start in on next reboot.
1.3.6.1.4.1.193.223.2.3080.1.33Scalarpt3080SystemLanguageread-writecurrentControls which language is used on web and facia. Change requires reboot.
1.3.6.1.4.1.193.223.2.3080.1.34Scalarpt3080SystemOperationOnTimeread-onlycurrentNumber of seconds this unit has been turned on since production.
1.3.6.1.4.1.193.223.2.3080.1.35Scalarpt3080SystemOperationOnAirTimeread-onlycurrentNumber of seconds this unit has been unmuted since production.
1.3.6.1.4.1.193.223.2.3080.1.36Scalarpt3080SystemOperationNumberOfBootsread-onlycurrentNumber of times this unit has been booted since last factory default restore.
1.3.6.1.4.1.193.223.2.3080.1.40Scalarpt3080SystemBackplaneidread-onlycurrentID of the backplane the device is plugged into
1.3.6.1.4.1.193.223.2.3080.1.41Scalarpt3080SystemBackplaneIdRawread-onlycurrentRaw ID of the backplane the device is plugged into
1.3.6.1.4.1.193.223.2.3080.1.42Scalarpt3080SystemBackplaneIdPcbread-onlycurrentPCB version of the backplane the device is plugged into
1.3.6.1.4.1.193.223.2.3080.1.43Scalarpt3080SystemBackplaneIdCableOptionsread-onlycurrentCable options of the backplane the device is plugged into
1.3.6.1.4.1.193.223.2.3080.1.44Scalarpt3080SystemBackplaneIdMAnufread-onlycurrentManufacture ID of the backplane the device is plugged into
1.3.6.1.4.1.193.223.2.3080.1.45Scalarpt3080SystemBackplaneCalibrationDateread-onlycurrentCalibration date of the backplane the device is plugged into
1.3.6.1.4.1.193.223.2.3080.1.46Scalarpt3080SystemBackplaneCalibrationSwread-onlycurrentCalibration SW version of the backplane the device is plugged into
1.3.6.1.4.1.193.223.2.3080.1.47Scalarpt3080SystemBackplaneIdPartlistread-onlycurrentPartlist version of the backplane the device is plugged into
1.3.6.1.4.1.193.223.2.3080.1.50Tablept3080SystemScheduledActionTablenot-accessiblecurrentThis table contains the scheduled actions
1.3.6.1.4.1.193.223.2.3080.1.50.1Rowpt3080SystemScheduledActionEntrynot-accessiblecurrentAn entry for the scheduled action
1.3.6.1.4.1.193.223.2.3080.1.50.1.1Columnpt3080SystemScheduledActionIDnot-accessiblecurrentUnique ID for this scheduled action entry
1.3.6.1.4.1.193.223.2.3080.1.50.1.2Columnpt3080SystemScheduledActionRecurrenceread-writecurrentThe interval at which this scheduled action entry will be executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.3Columnpt3080SystemScheduledActionHourread-writecurrentThe recurrence hour used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly.
1.3.6.1.4.1.193.223.2.3080.1.50.1.4Columnpt3080SystemScheduledActionMinuteread-writecurrentThe recurrence minute used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly.
1.3.6.1.4.1.193.223.2.3080.1.50.1.5Columnpt3080SystemScheduledActionWeekdayread-writecurrentThe recurrence weekday used when pt3080SystemScheduledActionRecurrence is weekly.
1.3.6.1.4.1.193.223.2.3080.1.50.1.6Columnpt3080SystemScheduledActionMonthDayread-writecurrentThe recurrence day of the monthe used when pt3080SystemScheduledActionRecurrence is monthly.
1.3.6.1.4.1.193.223.2.3080.1.50.1.7Columnpt3080SystemScheduledActionDateread-writecurrentThe recurrence date used when pt3080SystemScheduledActionRecurrence is once. The format is dd/mm/yyyy.
1.3.6.1.4.1.193.223.2.3080.1.50.1.8Columnpt3080SystemScheduledActionRandomDelayread-writecurrentAn extra random delay added before the action for this entry is executed. A setting of x means that a random delay between 0 and x seconds are added.
1.3.6.1.4.1.193.223.2.3080.1.50.1.9Columnpt3080SystemScheduledActionActionread-writecurrentThe action for this entry is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.10Columnpt3080SystemScheduledActionRepeaterModeread-writecurrentThe new repeater mode to change to when pt3080SystemScheduledActionAction of type repeatermode is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.11Columnpt3080SystemScheduledActionPresetNoread-writecurrentThe preset to load when pt3080SystemScheduledActionAction of type preset is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.12Columnpt3080SystemScheduledActionRebootImageread-writecurrentThe image to reboot to when pt3080SystemScheduledActionAction of type reboot is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.13Columnpt3080SystemScheduledActionRebootSystemTyperead-writecurrentThe system type to reboot to when pt3080SystemScheduledActionAction of type reboot is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.14Columnpt3080SystemScheduledActionMuteread-writecurrentThe mute mode to change into when pt3080SystemScheduledActionAction of type mute is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.15Columnpt3080SystemScheduledActionSWUpgradeProtocolread-writecurrentThe protocol to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.16Columnpt3080SystemScheduledActionSWUpgradeUsernameread-writecurrentThe username to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.17Columnpt3080SystemScheduledActionSWUpgradePasswordread-writecurrentThe password to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.18Columnpt3080SystemScheduledActionSWUpgradeImageServerread-writecurrentThe server name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
1.3.6.1.4.1.193.223.2.3080.1.50.1.19Columnpt3080SystemScheduledActionSWUpgradeImagePathread-writecurrentThe image path name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed
1.3.6.1.4.1.193.223.2.3080.2Nodept3080Mode
1.3.6.1.4.1.193.223.2.3080.2.1Scalarpt3080ModeNetworkread-writecurrentNetwork mode multi-frequency-network or single-frequency-network
1.3.6.1.4.1.193.223.2.3080.2.2Scalarpt3080ModeHierarchyread-writecurrentHierarchy mode. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.3Scalarpt3080Modeifftread-writecurrentIFFT 2k, 4k or 8k mode. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.4Scalarpt3080ModeCodeRateHighPrioread-writecurrentHigh Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.5Scalarpt3080ModeCodeRateLowPrioread-writecurrentLow Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.6Scalarpt3080ModeConstellationread-writecurrentIf QPSK is selected and Hierarchical is <> NONE, then Hierarchical will be forced to NONE. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.7Scalarpt3080ModeGuardIntervalread-writecurrentGuard Interval. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.8Scalarpt3080ModeCellIDread-writecurrentSets the Cell ID value. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.9Scalarpt3080ModeEnableCellIDread-writecurrentEnables Cell ID in the TPS information. Cannot be set if pt3080ModeMipControl is on(1). Cannot be set to off(0) if pt3080ModeEnableDVBH is on(1)
1.3.6.1.4.1.193.223.2.3080.2.10Scalarpt3080ModeDeepInterleaverread-writecurrentEnables Deep Interleaver. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.11Scalarpt3080ModeEnableDVBHread-writecurrentEnables DVB-H mode
1.3.6.1.4.1.193.223.2.3080.2.12Scalarpt3080ModeMpeFecLowPrioread-writecurrentEnables MPE Fec Low Priority. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.13Scalarpt3080ModeMpeFecHighPrioread-writecurrentEnables MPE Fec High Priority. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.14Scalarpt3080ModeTimeSlicingLowPrioread-writecurrentEnables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.15Scalarpt3080ModeTimeSlicingHighPrioread-writecurrentEnables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1).
1.3.6.1.4.1.193.223.2.3080.2.16Scalarpt3080ModeSfnDelayOffsetread-writecurrentSFN delay offset
1.3.6.1.4.1.193.223.2.3080.2.17Scalarpt3080ModeTxIdentread-writecurrentThe transport stream control identifier
1.3.6.1.4.1.193.223.2.3080.2.18Scalarpt3080ModeMipControlread-writecurrentEnables transport stream control of modulator
1.3.6.1.4.1.193.223.2.3080.2.19Scalarpt3080ModeMfnKeepNullPacketsread-writecurrentEnables MFN mode keep null packets option
1.3.6.1.4.1.193.223.2.3080.2.20Scalarpt3080ModeNetworkDelayHPread-onlycurrentCurrent network delay of HP TS
1.3.6.1.4.1.193.223.2.3080.2.21Scalarpt3080ModeNetworkDelayMinHPread-onlycurrentMinimum network delay of HP TS seen since last reset
1.3.6.1.4.1.193.223.2.3080.2.22Scalarpt3080ModeNetworkDelayMaxHPread-onlycurrentMaximum network delay of HP TS seen since last reset
1.3.6.1.4.1.193.223.2.3080.2.23Scalarpt3080ModeMaxNetworkDelayHPread-onlycurrentMaximum allowed network delay, as received from MIP
1.3.6.1.4.1.193.223.2.3080.2.24Scalarpt3080ModeNetworkDelayMarginHPread-onlycurrentDifference between Actual Network Delay and Max. Allowed Network Delay
1.3.6.1.4.1.193.223.2.3080.2.25Scalarpt3080ModeNetworkDelayLPread-onlycurrentCurrent network delay of LP TS
1.3.6.1.4.1.193.223.2.3080.2.26Scalarpt3080ModeNetworkDelayMinLPread-onlycurrentMinimum network delay of LP TS seen since last reset
1.3.6.1.4.1.193.223.2.3080.2.27Scalarpt3080ModeNetworkDelayMaxLPread-onlycurrentMaximum network delay of LP TS seen since last reset
1.3.6.1.4.1.193.223.2.3080.2.28Scalarpt3080ModeMaxNetworkDelayLPread-onlycurrentMaximum allowed network delay, as received from MIP
1.3.6.1.4.1.193.223.2.3080.2.29Scalarpt3080ModeNetworkDelayMarginLPread-onlycurrentDifference between Actual Network Delay and Max. Allowed Network Delay
1.3.6.1.4.1.193.223.2.3080.2.30Scalarpt3080ModeNetworkDelayResetread-writecurrentReset network delay. Always reads back as noop(0)
1.3.6.1.4.1.193.223.2.3080.2.31Scalarpt3080ModeDefaultMIPOutputPowerread-writecurrentDefault MIP value for Output Power Level. Cannot be set if pt3080ModeMipControlOutputPower is on(1)
1.3.6.1.4.1.193.223.2.3080.2.32Scalarpt3080ModeDefaultMIPOutputTimeOffsetread-writecurrentDefault MIP value for Output SFN Time Offset. Cannot be set if pt3080ModeMipControlOutputTimeOffset is on(1)
1.3.6.1.4.1.193.223.2.3080.2.33Scalarpt3080ModeDefaultMIPOutputCellIDread-writecurrentDefault MIP value for Output Cell ID. Cannot be set if pt3080ModeMipControlOutputCellId is on(1)
1.3.6.1.4.1.193.223.2.3080.2.34Scalarpt3080ModeDefaultMIPOutputFreqOffsetread-writecurrentDefault MIP value for Output frequency Offset. Cannot be set if pt3080ModeMipControlOutputFreqOffset is on(1)
1.3.6.1.4.1.193.223.2.3080.2.35Scalarpt3080ModeMIPMaxSFNDelayread-onlycurrentThe MIP value for SFN maximum delay
1.3.6.1.4.1.193.223.2.3080.2.36Scalarpt3080ModeMipControlOutputPowerread-writecurrentEnables transport stream control of ModeDefaultMIPOutputPower
1.3.6.1.4.1.193.223.2.3080.2.37Scalarpt3080ModeMipControlOutputTimeOffsetread-writecurrentEnables transport stream control of ModeDefaultMIPOutputTimeOffset
1.3.6.1.4.1.193.223.2.3080.2.38Scalarpt3080ModeMipControlOutputCellIdread-writecurrentEnables transport stream control of ModeDefaultMIPOutputCellId
1.3.6.1.4.1.193.223.2.3080.2.39Scalarpt3080ModeMipControlOutputFreqOffsetread-writecurrentEnables transport stream control of ModeDefaultMIPOutputFreqOffset
1.3.6.1.4.1.193.223.2.3080.2.40Scalarpt3080ModeListenBroadcastread-writecurrentControl wheter to react on broadcast tx id.
1.3.6.1.4.1.193.223.2.3080.3Nodept3080Input
1.3.6.1.4.1.193.223.2.3080.3.1Scalarpt3080InputRefDirectionread-writecurrentmonitors the Reference signal direction. state: - inputOutput[inputOutput_INPUT] - inputOutput[inputOutput_OUTPUT]
1.3.6.1.4.1.193.223.2.3080.3.2Scalarpt3080InputRefSourceread-writecurrentDefines the input reference synchronisation source. If the value AUTO is chosen, the source is chosen automatically between available sources. The order of cho…
1.3.6.1.4.1.193.223.2.3080.3.3Scalarpt3080InputRef10MhzImpedanceread-writecurrentDefines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance.
1.3.6.1.4.1.193.223.2.3080.3.4Scalarpt3080InputRef1PPSImpedanceread-writecurrentDefines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance.
1.3.6.1.4.1.193.223.2.3080.3.5Scalarpt3080InputRef1PPSTrigSloperead-writecurrentDefines the trigger edge of the external 1PPS input reference clock. The value is either RISING or FALLING.
1.3.6.1.4.1.193.223.2.3080.3.6Scalarpt3080InputRef1PPSTrigLevelread-writecurrentDefines the trigger level of the external 1PPS input reference clock
1.3.6.1.4.1.193.223.2.3080.3.7Scalarpt3080InputRef10MhzHoldoverDelayread-writecurrentDefines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance.
1.3.6.1.4.1.193.223.2.3080.3.8Scalarpt3080InputRef10MhzHoldoverForeverread-writecurrentThe holdover delay for input reference source 10MHz failure is forever
1.3.6.1.4.1.193.223.2.3080.3.9Scalarpt3080InputRef1PPSHoldoverDelayread-writecurrentDefines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance.
1.3.6.1.4.1.193.223.2.3080.3.10Scalarpt3080InputRef1PPSHoldoverForeverread-writecurrentThe holdover delay for input reference source 1 pps failure is forever
1.3.6.1.4.1.193.223.2.3080.3.11Scalarpt3080InputRefStatusread-onlycurrentreturns the current input reference synchronisation source.
1.3.6.1.4.1.193.223.2.3080.3.12Scalarpt3080InputASITSPrimarySourceread-writecurrentThe TS-Primary input source connector selected
1.3.6.1.4.1.193.223.2.3080.3.13Scalarpt3080InputASITSSecondarySourceread-writecurrentThe TS-Secondary input source connector selected
1.3.6.1.4.1.193.223.2.3080.3.14Scalarpt3080InputASIAutoRoutingPolicyread-writecurrentThe policy to use for TS auto routing
1.3.6.1.4.1.193.223.2.3080.3.15Scalarpt3080InputASIAutoRoutingDelayHp2Lpread-writecurrentThe delay before performing the actual substitution where TS-Primary -> TS-LP and TS-Secondary -> TS-HP
1.3.6.1.4.1.193.223.2.3080.3.16Scalarpt3080InputASIAutoRoutingDelayLp2Hpread-writecurrentThe delay before performing the actual substitution where TS-Primary -> TS-HP and TS-Secondary -> TS-LP
1.3.6.1.4.1.193.223.2.3080.3.17Scalarpt3080InputASIHoldoverTimeoutread-writecurrentThe time ASI Holdover will be active, if seamless ASI switching is not possible
1.3.6.1.4.1.193.223.2.3080.3.18Scalarpt3080InputTSPrimaryMaxPATDelayread-writecurrentThe Max delay between the Program Association Table (PAT) on the incomming transport stream.
1.3.6.1.4.1.193.223.2.3080.3.19Scalarpt3080InputTSPrimaryMaxPATDelayEnableread-writecurrentEnables TS switching if the Max delay between PAT table updates has been exceeded.
1.3.6.1.4.1.193.223.2.3080.3.20Scalarpt3080InputTSPrimaryExpectedTSIDread-writecurrentThe TS-ID value expected on the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.21Scalarpt3080InputTSPrimaryExpectedTSIDEnableread-writecurrentEnables TS switching if the TS-ID is not the expected value.
1.3.6.1.4.1.193.223.2.3080.3.22Scalarpt3080InputTSPrimaryExpectedNWIDread-writecurrentThe NW-ID value expected on the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.23Scalarpt3080InputTSPrimaryExpectedNWIDEnableread-writecurrentEnables TS switching if the NW-ID is not the expected value.
1.3.6.1.4.1.193.223.2.3080.3.24Scalarpt3080InputTSPrimaryMaxStuffingrateread-writecurrentThe expected stuffing rate on the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.25Scalarpt3080InputTSPrimaryMaxStuffingrateEnableread-writecurrentEnables TS switching if the Stuffing rate is over the expected value.
1.3.6.1.4.1.193.223.2.3080.3.26Scalarpt3080InputTSPrimaryMaxStsJitterread-writecurrentThe Max STS jitter on the TS-Primary
1.3.6.1.4.1.193.223.2.3080.3.27Scalarpt3080InputTSSecondaryMaxPATDelayread-writecurrentThe Max delay between the Program Association Table (PAT) on the incomming transport stream.
1.3.6.1.4.1.193.223.2.3080.3.28Scalarpt3080InputTSSecondaryMaxPATDelayEnableread-writecurrentEnables TS switching if the Max delay between PAT table updates has been exceeded.
1.3.6.1.4.1.193.223.2.3080.3.29Scalarpt3080InputTSSecondaryExpectedTSIDread-writecurrentThe TS-ID value expected on the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.30Scalarpt3080InputTSSecondaryExpectedTSIDEnableread-writecurrentEnables TS switching if the TS-ID is not the expected value.
1.3.6.1.4.1.193.223.2.3080.3.31Scalarpt3080InputTSSecondaryExpectedNWIDread-writecurrentThe NW-ID value expected on the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.32Scalarpt3080InputTSSecondaryExpectedNWIDEnableread-writecurrentEnables TS switching if the NW-ID is not the expected value.
1.3.6.1.4.1.193.223.2.3080.3.33Scalarpt3080InputTSSecondaryMaxStuffingrateread-writecurrentThe expected stuffing rate on the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.34Scalarpt3080InputTSSecondaryMaxStuffingrateEnableread-writecurrentEnables TS switching if the Stuffing rate is over the expected value.
1.3.6.1.4.1.193.223.2.3080.3.35Scalarpt3080InputTSSecondaryMaxStsJitterread-writecurrentThe Max STS jitter on the TS-Secondary
1.3.6.1.4.1.193.223.2.3080.3.36Scalarpt3080InputTSPrimaryStatusread-onlycurrentThe current state for TS-Primary. Unavailable means violation of alarms.
1.3.6.1.4.1.193.223.2.3080.3.37Scalarpt3080InputTSSecondaryStatusread-onlycurrentThe current state for TS-Secondary. Unavailable means violation of alarms.
1.3.6.1.4.1.193.223.2.3080.3.38Scalarpt3080InputTSHpread-onlycurrentThe input source currently On Air. (TS-HP)
1.3.6.1.4.1.193.223.2.3080.3.39Scalarpt3080InputTSLpread-onlycurrentThe input source currently used as backup. (TS-LP)
1.3.6.1.4.1.193.223.2.3080.3.40Scalarpt3080InputEffectiveAutoroutingPolicyread-onlycurrentReflects the effective ASI Autorouting Policy
1.3.6.1.4.1.193.223.2.3080.3.41Scalarpt3080InputTSHpBitrateread-onlycurrentCurrent bitrate for On Air TS. (TS-HP)
1.3.6.1.4.1.193.223.2.3080.3.42Scalarpt3080InputTSHpPacketsBufferedread-onlycurrentCurrent number of packets buffered for On Air TS (TS-HP)
1.3.6.1.4.1.193.223.2.3080.3.43Scalarpt3080InputTSHpPacketSizeread-onlycurrentCurrent size of packets for On Air TS (TS-HP)
1.3.6.1.4.1.193.223.2.3080.3.44Scalarpt3080InputTSHpStuffingrateread-onlycurrentCurrent NULL stuffing as a percentage of the current bitrate for On Air TS (TS-HP)
1.3.6.1.4.1.193.223.2.3080.3.45Scalarpt3080InputTSHpTSIDread-onlycurrentCurrent Transport Stream ID for On Air TS. (TS-HP)
1.3.6.1.4.1.193.223.2.3080.3.46Scalarpt3080InputTSHpNWIDread-onlycurrentCurrent Network ID for On Air TS. (TS-HP)
1.3.6.1.4.1.193.223.2.3080.3.47Scalarpt3080InputTSLpBitrateread-onlycurrentCurrent bitrate for Backup TS. (TS-LP)
1.3.6.1.4.1.193.223.2.3080.3.48Scalarpt3080InputTSLpPacketsBufferedread-onlycurrentCurrent number of packets buffered for Backup TS. (TS-LP)
1.3.6.1.4.1.193.223.2.3080.3.49Scalarpt3080InputTSLpPacketSizeread-onlycurrentCurrent size of packets for Backup TS. (TS-LP)
1.3.6.1.4.1.193.223.2.3080.3.50Scalarpt3080InputTSLpStuffingrateread-onlycurrentCurrent NULL stuffing as a percentage of the current bitrate for Backup TS. (TS-LP)
1.3.6.1.4.1.193.223.2.3080.3.51Scalarpt3080InputTSLpTSIDread-onlycurrentCurrent Transport Stream ID for Backup TS. (TS-LP)
1.3.6.1.4.1.193.223.2.3080.3.52Scalarpt3080InputTSLpNWIDread-onlycurrentCurrent Network ID for Backup TS. (TS-LP)
1.3.6.1.4.1.193.223.2.3080.3.53Scalarpt3080InputTSPrimaryStsJitterread-onlycurrentCurrent STS jitter on the TS-Primary.
1.3.6.1.4.1.193.223.2.3080.3.54Scalarpt3080InputTSPrimaryStsJitterMaxread-onlycurrentThe Maximum STS jitter value seen on the TS-Primary
1.3.6.1.4.1.193.223.2.3080.3.55Scalarpt3080InputTSPrimaryStsJitterMinread-onlycurrentThe minimum STS jitter value seen on the TS-Primary
1.3.6.1.4.1.193.223.2.3080.3.56Scalarpt3080InputTSPrimaryStsJitterResetread-writecurrentReset the pt3080InputTSPrimaryStsJitterMax and pt3080InputTSPrimaryStsJitterMin values
1.3.6.1.4.1.193.223.2.3080.3.57Scalarpt3080InputTSSecondaryStsJitterread-onlycurrentCurrent STS jitter on the TS-Secondary
1.3.6.1.4.1.193.223.2.3080.3.58Scalarpt3080InputTSSecondaryStsJitterMaxread-onlycurrentThe Maximum STS jitter value seen on the TS-Secondary
1.3.6.1.4.1.193.223.2.3080.3.59Scalarpt3080InputTSSecondaryStsJitterMinread-onlycurrentThe minimum STS jitter value seen on the TS-Secondary
1.3.6.1.4.1.193.223.2.3080.3.60Scalarpt3080InputTSSecondaryStsJitterResetread-writecurrentReset the pt3080InputTSSecondaryStsJitterMax and pt3080InputTSSecondaryStsJitterMin values
1.3.6.1.4.1.193.223.2.3080.3.64Scalarpt3080InputTSPrimaryMinDelaymarginread-writecurrentThe minimum delay margin of the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.65Scalarpt3080InputTSPrimaryMinDelaymarginEnableread-writecurrentEnables TS switching if the Minimum Delay margin is not according to the expected value.
1.3.6.1.4.1.193.223.2.3080.3.66Scalarpt3080InputTSSecondaryMinDelaymarginread-writecurrentThe minimum delay margin of the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.67Scalarpt3080InputTSSecondaryMinDelaymarginEnableread-writecurrentEnables TS switching if the Minimum Delay margin is not according to the expected value.
1.3.6.1.4.1.193.223.2.3080.3.68Scalarpt3080InputTSPrimaryMaxMissingmipread-writecurrentThe maximum seconds of missing mip information from the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.69Scalarpt3080InputTSPrimaryMaxMissingmipEnableread-writecurrentEnables TS switching if the Maximum missing mip is not according to the expected value.
1.3.6.1.4.1.193.223.2.3080.3.73Scalarpt3080InputTSSecondaryMaxMissingmipread-writecurrentThe maximum seconds of missing mip information from the incoming TS stream.
1.3.6.1.4.1.193.223.2.3080.3.74Scalarpt3080InputTSSecondaryMaxMissingmipEnableread-writecurrentEnables TS switching if the Maximum missing mip is not according to the expected value.
1.3.6.1.4.1.193.223.2.3080.3.90Scalarpt3080InputRefDevTyperead-onlycurrentType of TCXO/OCXO
1.3.6.1.4.1.193.223.2.3080.3.91Scalarpt3080InputRefCalDateread-onlycurrentCalibration Date
1.3.6.1.4.1.193.223.2.3080.3.92Scalarpt3080InputRefCalVerread-onlycurrentCalibration SW Version
1.3.6.1.4.1.193.223.2.3080.4Nodept3080Output
1.3.6.1.4.1.193.223.2.3080.4.1Scalarpt3080OutputModeread-writecurrentControl RF output mode
1.3.6.1.4.1.193.223.2.3080.4.2Scalarpt3080OutputRfFrequencyread-writecurrentOutput RF frequency
1.3.6.1.4.1.193.223.2.3080.4.3Scalarpt3080OutputRfLevelread-writecurrentSets the output level in 0.01dB steps, 0dB is +6dBm on IF, 0dBm on RF
1.3.6.1.4.1.193.223.2.3080.4.4Scalarpt3080OutputBandwidthread-writecurrentOutput Bandwidth
1.3.6.1.4.1.193.223.2.3080.4.5Scalarpt3080OutputChannelread-writecurrentChannel settings
1.3.6.1.4.1.193.223.2.3080.4.6Scalarpt3080OutputSynchronizedread-onlycurrentThe values of pt3080OutputRfFrequency, pt3080OutputBandwidth and pt3080OutputChannel are synchronized aaccording to freq = (bw * channel) + 306000000.
1.3.6.1.4.1.193.223.2.3080.4.7Scalarpt3080OutputMuteread-writecurrentOutput mute. When set the mute reason UserRequest is ORed into the mute reason set. When read it is the logical OR of all mute reasons
1.3.6.1.4.1.193.223.2.3080.4.8Scalarpt3080OutputPolarityread-writecurrentControl RF output polarity
1.3.6.1.4.1.193.223.2.3080.4.9Scalarpt3080OutputPowerLevelread-writecurrentThe desired output power level.
1.3.6.1.4.1.193.223.2.3080.4.10Scalarpt3080OutputRfFrequencyOffsetread-writecurrentOutput RF frequency offset
1.3.6.1.4.1.193.223.2.3080.4.13Scalarpt3080OutputIfEnableread-writecurrentControl IF output
1.3.6.1.4.1.193.223.2.3080.4.14Scalarpt3080OutputIfFrequencyread-writecurrentOutput Frequency for I/F
1.3.6.1.4.1.193.223.2.3080.4.15Scalarpt3080OutputIfPolarityread-writecurrentControl IF output polarity
1.3.6.1.4.1.193.223.2.3080.4.16Scalarpt3080OutputIfLevelread-writecurrentOutput Level for I/F
1.3.6.1.4.1.193.223.2.3080.4.17Scalarpt3080OutputEffectiveLevelread-onlycurrentEffective RF Output Level
1.3.6.1.4.1.193.223.2.3080.4.18Scalarpt3080OutputActualLevelread-onlycurrentActual RF Output Level
1.3.6.1.4.1.193.223.2.3080.4.19Scalarpt3080OutputRfDetectedActualLevelread-onlycurrentDetected Output Level for RF
1.3.6.1.4.1.193.223.2.3080.4.20Scalarpt3080OutputRfDetectedLowerLevelLimitread-writecurrentLimit to how much lower the detected RF output level can be than the configured level.
1.3.6.1.4.1.193.223.2.3080.4.21Scalarpt3080OutputRfDetectedLowerLevelcontrolread-writecurrentControls whether the lower limit for RF output level is enforced.
1.3.6.1.4.1.193.223.2.3080.4.22Scalarpt3080OutputRfDetectedHigherLevelLimitread-writecurrentLimit to how much higher the detected RF output level can be than the configured level.
1.3.6.1.4.1.193.223.2.3080.4.23Scalarpt3080OutputRfDetectedHigherLevelcontrolread-writecurrentControls whether the higher limit for RF output level is enforced.
1.3.6.1.4.1.193.223.2.3080.4.30Scalarpt3080OutputRfAlcControlread-writecurrentControls whether the ALC system is enabled or disabled.
1.3.6.1.4.1.193.223.2.3080.4.31Scalarpt3080OutputRfAlcSenseread-writecurrentControls which sense port is used by the ALC system if the ALC is enabled.
1.3.6.1.4.1.193.223.2.3080.4.32Scalarpt3080OutputRfAlcSetpointPort1read-writecurrentALC setpoint for RF Sense Port 1
1.3.6.1.4.1.193.223.2.3080.4.33Scalarpt3080OutputRfAlcSetpointPort2read-writecurrentALC setpoint for RF Sense Port 2
1.3.6.1.4.1.193.223.2.3080.4.34Scalarpt3080OutputRfAlcStatusread-onlycurrentStatus for whether the ALC system is enabled or disabled.
1.3.6.1.4.1.193.223.2.3080.4.35Scalarpt3080OutputRfAlcStatusInformationread-onlycurrentInformation on the state of the ALC system.
1.3.6.1.4.1.193.223.2.3080.4.50Scalarpt3080OutputRfCableModeread-writecurrentControl whether Cable Level loss compensation should be enabled
1.3.6.1.4.1.193.223.2.3080.4.51Scalarpt3080OutputRfCableConstantLevelOffsetread-writecurrentConstant level offset to add to RF Output level. Only used if mode is Constant.
1.3.6.1.4.1.193.223.2.3080.4.52Scalarpt3080OutputRfCableFrequencyLevelOffset0read-writecurrentFrequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
1.3.6.1.4.1.193.223.2.3080.4.53Scalarpt3080OutputRfCableFrequencyLevelOffset1read-writecurrentFrequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
1.3.6.1.4.1.193.223.2.3080.4.54Scalarpt3080OutputRfCableFrequencyLevelOffset2read-writecurrentFrequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
1.3.6.1.4.1.193.223.2.3080.4.55Scalarpt3080OutputRfCableFrequencyLevelOffset3read-writecurrentFrequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
1.3.6.1.4.1.193.223.2.3080.4.56Scalarpt3080OutputRfCableFrequencyLevelOffset4read-writecurrentFrequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
1.3.6.1.4.1.193.223.2.3080.4.57Scalarpt3080OutputRfCableFrequencyLevelOffset5read-writecurrentFrequency depedent level offset to add to RF Output level. Only used if mode is Automatic.
1.3.6.1.4.1.193.223.2.3080.7Nodept3080Gps
1.3.6.1.4.1.193.223.2.3080.7.1Scalarpt3080Gps1PPSStatusread-onlycurrentReturns the current locking state of the GPS system. The value LOCKED indicates that the GPS system is locked to a sufficient number of satellites to perform w…
1.3.6.1.4.1.193.223.2.3080.7.2Scalarpt3080GpsVisibleSatellitesread-onlycurrentReturns the number of currently visible satellites via the built-in GPS receiver. A satellite is visible if at all detectable by the GPS system i.e. regardless…
1.3.6.1.4.1.193.223.2.3080.7.3Scalarpt3080GpsTrackedSatellitesread-onlycurrentReturns the number of currently tracked satellites via the GPS receiver.
1.3.6.1.4.1.193.223.2.3080.7.4Scalarpt3080GpsBiasread-writecurrentDefines the bias to be either on or off for the GPS antenna DC supply (5V or 3V DC). An active GPS antenna requires a power supply i.e. requires this parameter…
1.3.6.1.4.1.193.223.2.3080.7.6Scalarpt3080GpsLongtituderead-onlycurrentReturns - as a string - the current longtitude derived from the received GPS signal(s). The string format is DDD MM SS C. according to the following: - DD deno…
1.3.6.1.4.1.193.223.2.3080.7.7Scalarpt3080GpsLatituderead-onlycurrentReturns - as a string - the current latitude derived from the received GPS signal(s). The string format is DD MM SS C. according to the following: - DD denotes…
1.3.6.1.4.1.193.223.2.3080.7.8Scalarpt3080GpsAltituderead-onlycurrentReturns - as a string - the current altitude derived from the received GPS signal(s). The string format is HHHH.c;. according to the following: HHHH.c denotes …
1.3.6.1.4.1.193.223.2.3080.7.9Scalarpt3080GpsVersionread-onlycurrentReturns the GPS chip firmware version as a string.
1.3.6.1.4.1.193.223.2.3080.7.10Scalarpt3080GpsHoldoverTimeread-writecurrentDefines the GPS holdover time. This value is ignored if the holdover forever (see below) is set to YES If the GPS locking is lost the system is allowed to cont…
1.3.6.1.4.1.193.223.2.3080.7.11Scalarpt3080GpsHoldoverForeverread-writecurrentDefines whether the GPS system is allowed to operate infinitely (YES) following loss of GPS locking using the internal GPS chip oscillator or not (NO).In case …
1.3.6.1.4.1.193.223.2.3080.7.12Scalarpt3080GpsCableDelayread-writecurrentDefines the antenna cable compensation delay. If the GPS antenna is situated far away from the receiver itself the signal will be delayed and must be compensat…
1.3.6.1.4.1.193.223.2.3080.7.13Scalarpt3080GpsStateread-onlycurrentReturns a string describing the GPS state. For informational purposes.
1.3.6.1.4.1.193.223.2.3080.7.14Scalarpt3080GpsVisibleSatellitesSnrread-onlycurrentReturns the average signal to noise ratio of all visible satellites via the built-in GPS receiver
1.3.6.1.4.1.193.223.2.3080.7.15Scalarpt3080GpsbiasVoltageread-writecurrentDefines the gps antenna bias voltage. An active GPS antenna requires a power supply of either 3V or 5V.
1.3.6.1.4.1.193.223.2.3080.7.16Scalarpt3080GpsSatelliteSystemGPSread-writecurrentControls whether GPS satellites are used to obtain position and timing information.
1.3.6.1.4.1.193.223.2.3080.7.17Scalarpt3080GpsSatelliteSystemGLONASSread-writecurrentControls whether GLONASS satellites are used to obtain position and timing information.
1.3.6.1.4.1.193.223.2.3080.7.18Scalarpt3080GpsSatelliteSystemGALILEOread-writecurrentControls whether GALILEO satellites are used to obtain position and timing information.
1.3.6.1.4.1.193.223.2.3080.7.19Scalarpt3080GpsSatelliteSystemCOMPASSread-writecurrentControls whether COMPASS satellites are used to obtain position and timing information.
1.3.6.1.4.1.193.223.2.3080.10Nodept3080TSoIP
1.3.6.1.4.1.193.223.2.3080.10.9Scalarpt3080TSoIPRx1SyncTimeoutread-writecurrentSpecifies the maximum time accepted between received TS packages.
1.3.6.1.4.1.193.223.2.3080.10.10Scalarpt3080TSoIPRx1MinumimLatencyread-writecurrentSpecifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data.
1.3.6.1.4.1.193.223.2.3080.10.11Scalarpt3080TSoIPRx1LanSelectread-writecurrentSpecifies which virtual LAN interface to receive IP/UDP packets from.
1.3.6.1.4.1.193.223.2.3080.10.12Scalarpt3080TSoIPRx1Multicastread-writecurrentEnables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are con…
1.3.6.1.4.1.193.223.2.3080.10.13Scalarpt3080TSoIPRx1Protocolread-writecurrentSelects which protocol to expect incoming packets to have.
1.3.6.1.4.1.193.223.2.3080.10.14Scalarpt3080TSoIPRx1Portnumberread-writecurrentSpecifies which UDP port number to receive IP/UDP packets from.
1.3.6.1.4.1.193.223.2.3080.10.15Scalarpt3080TSoIPRx1ReceiverEnableread-writecurrentEnables the reception of IP/UDP packets with transport stream data to be forward into the modulator.
1.3.6.1.4.1.193.223.2.3080.10.16Scalarpt3080TSoIPRx1PacketErrorRatioLimitread-writecurrentSpecifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised.
1.3.6.1.4.1.193.223.2.3080.10.17Scalarpt3080TSoIPRx1Statusread-onlycurrentThe current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second.
1.3.6.1.4.1.193.223.2.3080.10.18Scalarpt3080TSoIPRx1CurrentIPAddressread-onlycurrentThe current receive IP address for the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.19Scalarpt3080TSoIPRx1SequenceErrorsread-onlycurrentThe number of sequence errors on this channel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.20Scalarpt3080TSoIPRx1PacketErrorRatioread-onlycurrentShows the current error ratio of uncoming traffic for this UDP port.
1.3.6.1.4.1.193.223.2.3080.10.21Scalarpt3080TSoIPRx1LostIPFramesread-onlycurrentThe number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this stat…
1.3.6.1.4.1.193.223.2.3080.10.22Scalarpt3080TSoIPRx1CorrectedIPFramesread-onlycurrentThe number of corrected IP frames (via FEC) on this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.23Scalarpt3080TSoIPRx1FecColumnread-onlycurrentThe curent FEC Column (L) number for this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.24Scalarpt3080TSoIPRx1FecRowread-onlycurrentThe curent FEC Row (D) number for this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.25Scalarpt3080TSoIPRx1PacketsPerFrameread-onlycurrentThe curent number of TS packets per IP frames on this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.26Scalarpt3080TSoIPRx1IpBitrateread-onlycurrentShows the current bitrate of uncoming traffic for this UDP port.
1.3.6.1.4.1.193.223.2.3080.10.27Scalarpt3080TSoIPRx1QueueSizeread-onlycurrentThe curent queue size for this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.28Scalarpt3080TSoIPRx1CurrentLatencyread-onlycurrentThe current latency incurrent by queue size on this channel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.29Scalarpt3080TSoIPRx1TSPacketSizeread-onlycurrentThe curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204.
1.3.6.1.4.1.193.223.2.3080.10.30Scalarpt3080TSoIPRx1OverrunIPFramesread-onlycurrentThe number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the in…
1.3.6.1.4.1.193.223.2.3080.10.39Scalarpt3080TSoIPRx2SyncTimeoutread-writecurrentSpecifies the maximum time accepted between received TS packages.
1.3.6.1.4.1.193.223.2.3080.10.40Scalarpt3080TSoIPRx2MinumimLatencyread-writecurrentSpecifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data.
1.3.6.1.4.1.193.223.2.3080.10.41Scalarpt3080TSoIPRx2LanSelectread-writecurrentSpecifies which virtual LAN interface to receive IP/UDP packets from.
1.3.6.1.4.1.193.223.2.3080.10.42Scalarpt3080TSoIPRx2Multicastread-writecurrentEnables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are con…
1.3.6.1.4.1.193.223.2.3080.10.43Scalarpt3080TSoIPRx2Protocolread-writecurrentSelects which protocol to expect incoming packets to have.
1.3.6.1.4.1.193.223.2.3080.10.44Scalarpt3080TSoIPRx2Portnumberread-writecurrentSpecifies which UDP port number to receive IP/UDP packets from.
1.3.6.1.4.1.193.223.2.3080.10.45Scalarpt3080TSoIPRx2ReceiverEnableread-writecurrentEnables the reception of IP/UDP packets with transport stream data to be forward into the modulator.
1.3.6.1.4.1.193.223.2.3080.10.46Scalarpt3080TSoIPRx2PacketErrorRatioLimitread-writecurrentSpecifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised.
1.3.6.1.4.1.193.223.2.3080.10.47Scalarpt3080TSoIPRx2Statusread-onlycurrentThe current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second.
1.3.6.1.4.1.193.223.2.3080.10.48Scalarpt3080TSoIPRx2CurrentIPAddressread-onlycurrentThe current receive IP address for the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.49Scalarpt3080TSoIPRx2SequenceErrorsread-onlycurrentThe number of sequence errors on this channel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.50Scalarpt3080TSoIPRx2PacketErrorRatioread-onlycurrentShows the current error ratio of uncoming traffic for this UDP port.
1.3.6.1.4.1.193.223.2.3080.10.51Scalarpt3080TSoIPRx2LostIPFramesread-onlycurrentThe number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this stat…
1.3.6.1.4.1.193.223.2.3080.10.52Scalarpt3080TSoIPRx2CorrectedIPFramesread-onlycurrentThe number of corrected IP frames (via FEC) on this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.53Scalarpt3080TSoIPRx2FecColumnread-onlycurrentThe curent FEC Column (L) number for this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.54Scalarpt3080TSoIPRx2FecRowread-onlycurrentThe curent FEC Row (D) number for this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.55Scalarpt3080TSoIPRx2PacketsPerFrameread-onlycurrentThe curent number of TS packets per IP frames on this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.56Scalarpt3080TSoIPRx2IpBitrateread-onlycurrentShows the current bitrate of uncoming traffic for this UDP port.
1.3.6.1.4.1.193.223.2.3080.10.57Scalarpt3080TSoIPRx2QueueSizeread-onlycurrentThe curent queue size for this cannel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.58Scalarpt3080TSoIPRx2CurrentLatencyread-onlycurrentThe current latency incurrent by queue size on this channel on the TSoIP interface.
1.3.6.1.4.1.193.223.2.3080.10.59Scalarpt3080TSoIPRx2TSPacketSizeread-onlycurrentThe curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204.
1.3.6.1.4.1.193.223.2.3080.10.60Scalarpt3080TSoIPRx2OverrunIPFramesread-onlycurrentThe number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the in…
1.3.6.1.4.1.193.223.2.3080.12Nodept3080Monitor
1.3.6.1.4.1.193.223.2.3080.12.1Scalarpt3080MonitorSourceread-writecurrentSelects the source to be monitored on the ASI monitor output.
1.3.6.1.4.1.193.223.2.3080.12.10Scalarpt3080MonitorTSoIPEnableread-writecurrentEnable or disable the generation of monitor data over TSoIP.
1.3.6.1.4.1.193.223.2.3080.12.11Scalarpt3080MonitorTSoIPSourceread-writecurrentSelects the source to be monitored on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.12Scalarpt3080MonitorTSoIPDestIPAddressread-writecurrentSelects the destination IP address of the data to be monitored on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.13Scalarpt3080MonitorTSoIPDestPortread-writecurrentSelects the destination UDP Port number of the data to be monitored on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.14Scalarpt3080MonitorTSoIPProtocolread-writecurrentSelects the protocol to be used on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.15Scalarpt3080MonitorTSoIPEnableFecread-writecurrentEnable or disable FEC protocol on the output data from the TSoIP Monitor.
1.3.6.1.4.1.193.223.2.3080.12.16Scalarpt3080MonitorTSoIPFecColumnread-writecurrentSelects the FEC protocoll Column number (L) of the data to be monitored on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.17Scalarpt3080MonitorTSoIPFecRowread-writecurrentSelects the FEC protocol Row number (D) of the data to be monitored on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.18Scalarpt3080MonitorTSoIPFecSkewread-writecurrentSelects the FEC protocol Skew (non block alignment of FEC Frame) of the data to be monitored on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.19Scalarpt3080MonitorTSoIPKeepNullPacketsread-writecurrentRetain or discard Null packets of the generation of monitor data over TSoIP.
1.3.6.1.4.1.193.223.2.3080.12.20Scalarpt3080MonitorTSoIPPacketsPerFrameread-writecurrentSet the number of TS packets to send per IP frame on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.21Scalarpt3080MonitorTSoIPUDPChecksumread-writecurrentGenerate UDP checksum in the outgoing packets of the TSoIP Monitor.
1.3.6.1.4.1.193.223.2.3080.12.22Scalarpt3080MonitorTSoIPDSCPread-writecurrentSelects the value of the TOS/DSCP field in IP packets to be sent on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.23Scalarpt3080MonitorTSoIPTTLread-writecurrentSelects the value of the TTL (Time-To-Live) field in IP packets to be sent on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.24Scalarpt3080MonitorTSoIPGenerateErrorread-writecurrentArtificially generate an error rate as a percentage of frames lost on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.25Scalarpt3080MonitorTSoIPMulticastLanSelectread-writecurrentSpecifies which virtual LAN interface to transmit Multicast IP/UDP packets out via.
1.3.6.1.4.1.193.223.2.3080.12.30Scalarpt3080MonitorTSoIPIpBitrateread-onlycurrentThe current rate IP packets traffic to be sent on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.31Scalarpt3080MonitorTSoIPLostIPFramesread-onlycurrentThe number of IP packets traffic generated but lost on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.12.32Scalarpt3080MonitorTSoIPTSSizeread-onlycurrentThe current TS packet size (188 or 204) on the TSoIP monitor output.
1.3.6.1.4.1.193.223.2.3080.13Nodept3080Test
1.3.6.1.4.1.193.223.2.3080.13.1Scalarpt3080TestEnableread-writecurrentcontrols the test signal generation. This cannot be used when network mode is SFN. Only a subset is available in repeater mode. test signal output state: - tes…
1.3.6.1.4.1.193.223.2.3080.13.2Scalarpt3080TestEnableReconnectread-writecurrentControls whether the test signal shall reconnect after reset. This value is saved in non-volatile memory and thus survives a reboot. - onOffArray[TEXT_INDEX_OF…
1.3.6.1.4.1.193.223.2.3080.13.3Scalarpt3080TestScarrierLevelread-writecurrentControl level of the single carrier test signal.
1.3.6.1.4.1.193.223.2.3080.13.4Scalarpt3080TestscarrierFrequencyOffsetread-writecurrentControl frequency offset of the single carrier test signal.
1.3.6.1.4.1.193.223.2.3080.14Nodept3080Alarm
1.3.6.1.4.1.193.223.2.3080.14.1Tablept3080GroupAlarmTablenot-accessiblecurrentThis table contains the group alarms
1.3.6.1.4.1.193.223.2.3080.14.1.1Rowpt3080GroupAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.1.1.1Columnpt3080GroupAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.1.1.2Columnpt3080GroupAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.1.1.3Columnpt3080GroupAlarmStateread-onlycurrentCurrent GroupAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.1.1.4Columnpt3080GroupAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.1.1.5Columnpt3080GroupAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.1.1.6Columnpt3080GroupAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.1.1.7Columnpt3080GroupAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.1.1.8Columnpt3080GroupAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.1.1.9Columnpt3080GroupAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.1.1.10Columnpt3080GroupAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.5Tablept3080ASITSPrimaryAlarmTablenot-accessiblecurrentThis table contains the ASI TS-Primary alarms
1.3.6.1.4.1.193.223.2.3080.14.5.1Rowpt3080ASITSPrimaryAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.5.1.1Columnpt3080ASITSPrimaryAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.5.1.2Columnpt3080ASITSPrimaryAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.5.1.3Columnpt3080ASITSPrimaryAlarmStateread-onlycurrentCurrent ASITSPrimaryAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.5.1.4Columnpt3080ASITSPrimaryAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.5.1.5Columnpt3080ASITSPrimaryAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.5.1.6Columnpt3080ASITSPrimaryAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.5.1.7Columnpt3080ASITSPrimaryAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.5.1.8Columnpt3080ASITSPrimaryAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.5.1.9Columnpt3080ASITSPrimaryAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.5.1.10Columnpt3080ASITSPrimaryAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.6Tablept3080ASITSSecondaryAlarmTablenot-accessiblecurrentThis table contains the ASI alarms
1.3.6.1.4.1.193.223.2.3080.14.6.1Rowpt3080ASITSSecondaryAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.6.1.1Columnpt3080ASITSSecondaryAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.6.1.2Columnpt3080ASITSSecondaryAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.6.1.3Columnpt3080ASITSSecondaryAlarmStateread-onlycurrentCurrent ASITSSecondaryAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.6.1.4Columnpt3080ASITSSecondaryAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.6.1.5Columnpt3080ASITSSecondaryAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.6.1.6Columnpt3080ASITSSecondaryAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.6.1.7Columnpt3080ASITSSecondaryAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.6.1.8Columnpt3080ASITSSecondaryAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.6.1.9Columnpt3080ASITSSecondaryAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.6.1.10Columnpt3080ASITSSecondaryAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.7Tablept3080SFNAlarmTablenot-accessiblecurrentThis table contains the SFN alarms
1.3.6.1.4.1.193.223.2.3080.14.7.1Rowpt3080SFNAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.7.1.1Columnpt3080SFNAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.7.1.2Columnpt3080SFNAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.7.1.3Columnpt3080SFNAlarmStateread-onlycurrentCurrent SFNAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.7.1.4Columnpt3080SFNAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.7.1.5Columnpt3080SFNAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.7.1.6Columnpt3080SFNAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.7.1.7Columnpt3080SFNAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.7.1.8Columnpt3080SFNAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.7.1.9Columnpt3080SFNAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.7.1.10Columnpt3080SFNAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.8Tablept3080ReferenceAlarmTablenot-accessiblecurrentThis table contains the Reference alarms
1.3.6.1.4.1.193.223.2.3080.14.8.1Rowpt3080ReferenceAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.8.1.1Columnpt3080ReferenceAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.8.1.2Columnpt3080ReferenceAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.8.1.3Columnpt3080ReferenceAlarmStateread-onlycurrentCurrent ReferenceAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.8.1.4Columnpt3080ReferenceAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.8.1.5Columnpt3080ReferenceAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.8.1.6Columnpt3080ReferenceAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.8.1.7Columnpt3080ReferenceAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.8.1.8Columnpt3080ReferenceAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.8.1.9Columnpt3080ReferenceAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.8.1.10Columnpt3080ReferenceAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.9Tablept3080RFAlarmTablenot-accessiblecurrentThis table contains the RF alarms
1.3.6.1.4.1.193.223.2.3080.14.9.1Rowpt3080RFAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.9.1.1Columnpt3080RFAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.9.1.2Columnpt3080RFAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.9.1.3Columnpt3080RFAlarmStateread-onlycurrentCurrent RFAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.9.1.4Columnpt3080RFAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.9.1.5Columnpt3080RFAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.9.1.6Columnpt3080RFAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.9.1.7Columnpt3080RFAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.9.1.8Columnpt3080RFAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.9.1.9Columnpt3080RFAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.9.1.10Columnpt3080RFAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.10Tablept3080GPSAlarmTablenot-accessiblecurrentThis table contains the GPS alarms
1.3.6.1.4.1.193.223.2.3080.14.10.1Rowpt3080GPSAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.10.1.1Columnpt3080GPSAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.10.1.2Columnpt3080GPSAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.10.1.3Columnpt3080GPSAlarmStateread-onlycurrentCurrent GPSAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.10.1.4Columnpt3080GPSAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.10.1.5Columnpt3080GPSAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.10.1.6Columnpt3080GPSAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.10.1.7Columnpt3080GPSAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.10.1.8Columnpt3080GPSAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.10.1.9Columnpt3080GPSAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.10.1.10Columnpt3080GPSAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.12Tablept3080TSoIPAlarmTablenot-accessiblecurrentThis table contains the TSoIP alarms
1.3.6.1.4.1.193.223.2.3080.14.12.1Rowpt3080TSoIPAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.12.1.1Columnpt3080TSoIPAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.12.1.2Columnpt3080TSoIPAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.12.1.3Columnpt3080TSoIPAlarmStateread-onlycurrentCurrent TSoIPAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.12.1.4Columnpt3080TSoIPAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.12.1.5Columnpt3080TSoIPAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.12.1.6Columnpt3080TSoIPAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.12.1.7Columnpt3080TSoIPAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.12.1.8Columnpt3080TSoIPAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.12.1.9Columnpt3080TSoIPAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.12.1.10Columnpt3080TSoIPAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.13Tablept3080ExternalAlarmTablenot-accessiblecurrentThis table contains the External alarms
1.3.6.1.4.1.193.223.2.3080.14.13.1Rowpt3080ExternalAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.13.1.1Columnpt3080ExternalAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.13.1.2Columnpt3080ExternalAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.13.1.3Columnpt3080ExternalAlarmStateread-onlycurrentCurrent ExternalAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.13.1.4Columnpt3080ExternalAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.13.1.5Columnpt3080ExternalAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.13.1.6Columnpt3080ExternalAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.13.1.7Columnpt3080ExternalAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.13.1.8Columnpt3080ExternalAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.13.1.9Columnpt3080ExternalAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.13.1.10Columnpt3080ExternalAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.14Tablept3080HWMonitorAlarmTablenot-accessiblecurrentThis table contains the HW Monitor alarms
1.3.6.1.4.1.193.223.2.3080.14.14.1Rowpt3080HWMonitorAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.14.1.1Columnpt3080HWMonitorAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.14.1.2Columnpt3080HWMonitorAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.14.1.3Columnpt3080HWMonitorAlarmStateread-onlycurrentCurrent HWMonitorAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.14.1.4Columnpt3080HWMonitorAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.14.1.5Columnpt3080HWMonitorAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.14.1.6Columnpt3080HWMonitorAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.14.1.7Columnpt3080HWMonitorAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.14.1.8Columnpt3080HWMonitorAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.14.1.9Columnpt3080HWMonitorAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.14.1.10Columnpt3080HWMonitorAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.15Tablept3080CommsAlarmTablenot-accessiblecurrentThis table contains the Communication alarms
1.3.6.1.4.1.193.223.2.3080.14.15.1Rowpt3080CommsAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.15.1.1Columnpt3080CommsAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.15.1.2Columnpt3080CommsAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.15.1.3Columnpt3080CommsAlarmStateread-onlycurrentCurrent CommsAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.15.1.4Columnpt3080CommsAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.15.1.5Columnpt3080CommsAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.15.1.6Columnpt3080CommsAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.15.1.7Columnpt3080CommsAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.15.1.8Columnpt3080CommsAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.15.1.9Columnpt3080CommsAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.15.1.10Columnpt3080CommsAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.16Tablept3080ASIAlarmTablenot-accessiblecurrentThis table contains the ASI alarms
1.3.6.1.4.1.193.223.2.3080.14.16.1Rowpt3080ASIAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.16.1.1Columnpt3080ASIAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.16.1.2Columnpt3080ASIAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.16.1.3Columnpt3080ASIAlarmStateread-onlycurrentCurrent ASIAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.16.1.4Columnpt3080ASIAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.16.1.5Columnpt3080ASIAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.16.1.6Columnpt3080ASIAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.16.1.7Columnpt3080ASIAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.16.1.8Columnpt3080ASIAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.16.1.9Columnpt3080ASIAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.16.1.10Columnpt3080ASIAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.17Tablept3080DemodulatorAlarmTablenot-accessiblecurrentThis table contains the Demodulator alarms
1.3.6.1.4.1.193.223.2.3080.14.17.1Rowpt3080DemodulatorAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.17.1.1Columnpt3080DemodulatorAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.17.1.2Columnpt3080DemodulatorAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.17.1.3Columnpt3080DemodulatorAlarmStateread-onlycurrentCurrent DemodulatorAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.17.1.4Columnpt3080DemodulatorAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.17.1.5Columnpt3080DemodulatorAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.17.1.6Columnpt3080DemodulatorAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.17.1.7Columnpt3080DemodulatorAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.17.1.8Columnpt3080DemodulatorAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.17.1.9Columnpt3080DemodulatorAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.17.1.10Columnpt3080DemodulatorAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.14.18Tablept3080InternalAlarmTablenot-accessiblecurrentThis table contains the Internal alarms
1.3.6.1.4.1.193.223.2.3080.14.18.1Rowpt3080InternalAlarmEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.14.18.1.1Columnpt3080InternalAlarmIDnot-accessiblecurrentUnique ID for this alarm
1.3.6.1.4.1.193.223.2.3080.14.18.1.2Columnpt3080InternalAlarmDescriptionread-onlycurrentDescription for this alarm
1.3.6.1.4.1.193.223.2.3080.14.18.1.3Columnpt3080InternalAlarmStateread-onlycurrentCurrent InternalAlarm state condition
1.3.6.1.4.1.193.223.2.3080.14.18.1.4Columnpt3080InternalAlarmActionEventlogread-writecurrentWill the current alarm generate an event in the eventlog
1.3.6.1.4.1.193.223.2.3080.14.18.1.5Columnpt3080InternalAlarmActionRelay1read-writecurrentWill the current alarm activate relay1
1.3.6.1.4.1.193.223.2.3080.14.18.1.6Columnpt3080InternalAlarmActionRelay2read-writecurrentWill the current alarm activate relay2
1.3.6.1.4.1.193.223.2.3080.14.18.1.7Columnpt3080InternalAlarmActionTrapread-writecurrentWill the current alarm generate a trap
1.3.6.1.4.1.193.223.2.3080.14.18.1.8Columnpt3080InternalAlarmActionEmailread-writecurrentWill the current alarm generate an email
1.3.6.1.4.1.193.223.2.3080.14.18.1.9Columnpt3080InternalAlarmActionAlarmLEDread-writecurrentWill the current alarm turn Alarm LED on frontpanel on
1.3.6.1.4.1.193.223.2.3080.14.18.1.10Columnpt3080InternalAlarmActionForceModeread-writecurrentWill the current alarm mute output
1.3.6.1.4.1.193.223.2.3080.15Nodept3080Preset
1.3.6.1.4.1.193.223.2.3080.15.1Tablept3080PresetTablenot-accessiblecurrentThis table contains the presets
1.3.6.1.4.1.193.223.2.3080.15.1.1Rowpt3080PresetEntrynot-accessiblecurrentAn entry for the presets
1.3.6.1.4.1.193.223.2.3080.15.1.1.1Columnpt3080PresetNonot-accessiblecurrentUnique number for this preset
1.3.6.1.4.1.193.223.2.3080.15.1.1.2Columnpt3080PresetNameread-writecurrentName for this preset
1.3.6.1.4.1.193.223.2.3080.15.2Scalarpt3080PresetRecallread-writecurrentInstall this preset into current running parameter set. Value will always read as 0 and setting it to 0 has no effect.
1.3.6.1.4.1.193.223.2.3080.15.3Scalarpt3080PresetStoreread-writecurrentStore the currently running parameter set into this preset Value will always read as 0 and setting it to 0 has no effect.
1.3.6.1.4.1.193.223.2.3080.16Nodept3080Eventlog
1.3.6.1.4.1.193.223.2.3080.16.1Tablept3080EventlogTablenot-accessiblecurrentThis table contains the group alarms
1.3.6.1.4.1.193.223.2.3080.16.1.1Rowpt3080EventlogEntrynot-accessiblecurrentAn entry for the alarms
1.3.6.1.4.1.193.223.2.3080.16.1.1.1Columnpt3080EventlogNonot-accessiblecurrentUnique number for this event
1.3.6.1.4.1.193.223.2.3080.16.1.1.2Columnpt3080EventlogIDread-onlycurrentUnique ID for this type of event
1.3.6.1.4.1.193.223.2.3080.16.1.1.3Columnpt3080EventlogTimestampread-onlycurrentTimestamp for this event
1.3.6.1.4.1.193.223.2.3080.16.1.1.4Columnpt3080EventlogTextread-onlycurrentText for this event
1.3.6.1.4.1.193.223.2.3080.16.2Scalarpt3080EventlogClearread-writecurrentClear the entire eventlog by setting the value to 1.
1.3.6.1.4.1.193.223.2.3080.16.3Scalarpt3080EventlogEnableread-writecurrentEnable eventlog by setting the value to 1.
1.3.6.1.4.1.193.223.2.3080.16.4Scalarpt3080EventlogModeread-writecurrentSet eventlog mode to FIFO for keeping the newest entries. Set eventlog mode to FULL for keeping the oldest entries.
1.3.6.1.4.1.193.223.2.3080.17Nodept3080Comms
1.3.6.1.4.1.193.223.2.3080.17.1Scalarpt3080CommsLocalStaticIpAddrread-writecurrentThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.2Scalarpt3080CommsLocalStaticNetmaskread-writecurrentThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.3Scalarpt3080CommsLocalDhcpModeread-writecurrentEnable/Disable DHCP client on this interface.
1.3.6.1.4.1.193.223.2.3080.17.4Scalarpt3080CommsLocalCurrentIpAddrread-onlycurrentThe current IP address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.5Scalarpt3080CommsLocalCurrentNetmaskread-onlycurrentThe current IP netmask for this interface.
1.3.6.1.4.1.193.223.2.3080.17.7Scalarpt3080CommsRemoteStaticIpAddrread-writecurrentThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.8Scalarpt3080CommsRemoteStaticNetmaskread-writecurrentThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.10Scalarpt3080CommsRemoteCurrentIpAddrread-onlycurrentThe current IP address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.11Scalarpt3080CommsRemoteCurrentNetmaskread-onlycurrentThe current IP netmask for this interface.
1.3.6.1.4.1.193.223.2.3080.17.13Scalarpt3080CommsGbeAdminStaticIpAddrread-writecurrentThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.14Scalarpt3080CommsGbeAdminStaticNetmaskread-writecurrentThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.16Scalarpt3080CommsGbeAdminCurrentIpAddrread-onlycurrentThe current IP address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.17Scalarpt3080CommsGbeAdminCurrentNetmaskread-onlycurrentThe current IP netmask for this interface.
1.3.6.1.4.1.193.223.2.3080.17.19Scalarpt3080CommsStaticDNS1ServerAddressread-writecurrentThe IP address of DNS server 1.
1.3.6.1.4.1.193.223.2.3080.17.20Scalarpt3080CommsCurrentDNS1ServerAddressread-onlycurrentThe Current IP address of DNS server 1.
1.3.6.1.4.1.193.223.2.3080.17.21Scalarpt3080CommsStaticDNS2ServerAddressread-writecurrentThe IP address of DNS server 2.
1.3.6.1.4.1.193.223.2.3080.17.22Scalarpt3080CommsCurrentDNS2ServerAddressread-onlycurrentThe Current IP address of DNS server 2.
1.3.6.1.4.1.193.223.2.3080.17.23Scalarpt3080CommsStaticDNS3ServerAddressread-writecurrentThe IP address of DNS server 3.
1.3.6.1.4.1.193.223.2.3080.17.24Scalarpt3080CommsCurrentDNS3ServerAddressread-onlycurrentThe Current IP address of DNS server 3.
1.3.6.1.4.1.193.223.2.3080.17.25Scalarpt3080CommsStaticDNSDomainread-writecurrentThe static DNS domain name for the device. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.26Scalarpt3080CommsCurrentDNSDomainread-onlycurrentThe current DNS domain name for the device.
1.3.6.1.4.1.193.223.2.3080.17.27Scalarpt3080CommsStaticHostnameread-writecurrentThe static hostname for the device. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.28Scalarpt3080CommsCurrentHostnameread-onlycurrentThe static hostname for the device. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.29Scalarpt3080CommsStaticGatewayread-writecurrentThe static IP address for the default router (gateway). Will be used unless DHCP is enabled and the DHCP server is configured to include a default router addre…
1.3.6.1.4.1.193.223.2.3080.17.30Scalarpt3080CommsCurrentGatewayread-onlycurrentThe Current IP address for the default router (gateway).
1.3.6.1.4.1.193.223.2.3080.17.31Scalarpt3080CommsStaticNtpServerAddressread-writecurrentThe DNS name or IP address of the NTP server.
1.3.6.1.4.1.193.223.2.3080.17.32Scalarpt3080CommsCurrentNtpServerAddressread-onlycurrentThe Current IP address of the NTP server.
1.3.6.1.4.1.193.223.2.3080.17.33Scalarpt3080CommsEmailServerAddressread-writecurrentThe IP address of the Email (SMTP) server.
1.3.6.1.4.1.193.223.2.3080.17.34Scalarpt3080CommsAlarmEmailReceiverread-writecurrentThe email address of the receipiant of alarm emails.
1.3.6.1.4.1.193.223.2.3080.17.35Scalarpt3080CommsWebServicePortread-writecurrentThe TCP port number used for Web Service.
1.3.6.1.4.1.193.223.2.3080.17.36Scalarpt3080CommsSCPIServicePortread-writecurrentThe TCP port number used for SCPI Service.
1.3.6.1.4.1.193.223.2.3080.17.37Scalarpt3080CommsSCPIServerBaudrateread-writecurrentThe Baudrate used for SCPI Service on serial port.
1.3.6.1.4.1.193.223.2.3080.17.38Scalarpt3080CommsRipPortread-writecurrentThe UDP port number used for RIP Service.
1.3.6.1.4.1.193.223.2.3080.17.39Scalarpt3080CommsSCPIUartInterfaceread-writecurrentThe Interface used for SCPI Service on serial port.
1.3.6.1.4.1.193.223.2.3080.17.48Scalarpt3080CommsAccessAllowedread-writecurrentCurrent access mode allowed: Remote: SNMP via Ethernet, Local: Frontpanel
1.3.6.1.4.1.193.223.2.3080.17.49Scalarpt3080CommsAccessAllowedTimeoutread-writecurrentTimeout (in minutes) before local mode reverts to remote mode.
1.3.6.1.4.1.193.223.2.3080.17.50Scalarpt3080CommsAccessAllowedTimeLeftread-onlycurrentCurrent time left (in seconds) before local mode reverts to remote mode.
1.3.6.1.4.1.193.223.2.3080.17.51Scalarpt3080CommsAccessPasswordObserverread-writecurrentThe access password for Observer level access. Will always read as empty.
1.3.6.1.4.1.193.223.2.3080.17.52Scalarpt3080CommsAccessPasswordOperatorread-writecurrentThe access password for Operator level access. Will always read as empty.
1.3.6.1.4.1.193.223.2.3080.17.53Scalarpt3080CommsAccessPasswordAdministratorread-writecurrentThe access password for Administrator level access. Will always read as empty.
1.3.6.1.4.1.193.223.2.3080.17.55Scalarpt3080CommsSNMPServicePortread-writecurrentThe UDP port number used for SNMP Service.
1.3.6.1.4.1.193.223.2.3080.17.56Scalarpt3080CommsSNMPReadOnlyCommunityread-writecurrentThe Read-only community string used to access the SNMP Service.
1.3.6.1.4.1.193.223.2.3080.17.57Scalarpt3080CommsSNMPReadWriteCommunityread-writecurrentThe Read-Write community string used to access the SNMP Service.
1.3.6.1.4.1.193.223.2.3080.17.58Scalarpt3080CommsSNMPTrapCommunityread-writecurrentThe Trap community string used when sending SNMP Traps.
1.3.6.1.4.1.193.223.2.3080.17.59Scalarpt3080CommsSNMPTrapDestinationread-writecurrentThe destination IP address for the SNMP traps.
1.3.6.1.4.1.193.223.2.3080.17.60Scalarpt3080CommsSNMPTrapDestinationPortread-writecurrentThe UDP port number used for Trap destination .
1.3.6.1.4.1.193.223.2.3080.17.73Scalarpt3080CommsRemoteDhcpModeread-writecurrentEnable/Disable DHCP client on this interface.
1.3.6.1.4.1.193.223.2.3080.17.74Scalarpt3080CommsGbeAdminDhcpModeread-writecurrentEnable/Disable DHCP client on this interface.
1.3.6.1.4.1.193.223.2.3080.17.75Scalarpt3080CommsBackupDhcpModeread-writecurrentEnable/Disable DHCP client on this interface.
1.3.6.1.4.1.193.223.2.3080.17.80Scalarpt3080CommsLocalPhysicalInterfaceread-writecurrentThe Physical Ethernet Interface of this (virtual) interface.
1.3.6.1.4.1.193.223.2.3080.17.81Scalarpt3080CommsRemotePhysicalInterfaceread-writecurrentThe Physical Ethernet Interface of this (virtual) interface.
1.3.6.1.4.1.193.223.2.3080.17.82Scalarpt3080CommsGbeAdminPhysicalInterfaceread-writecurrentThe Physical Ethernet Interface of this (virtual) interface.
1.3.6.1.4.1.193.223.2.3080.17.94Scalarpt3080CommsBroadcastStormProtectionread-writecurrentEnable/Disable broadcast (and multicast) storm Protection. This will limit the network ingress rate on physical Ethernet port 0 and 1 to roughly 100mbit/s.
1.3.6.1.4.1.193.223.2.3080.17.95Scalarpt3080CommsIGMPv2UnsolicitedReportIntervalread-writecurrentThe time interval between unsolicited IGMPv2/v1 reports being sent. See RFC2236. The number of such report being sent is controlled by the Query Robustness Cou…
1.3.6.1.4.1.193.223.2.3080.17.96Scalarpt3080CommsIGMPv3UnsolicitedReportIntervalread-writecurrentThe time interval between unsolicited IGMPv3 reports being sent. See RFC3376. The number of such report being sent is controlled by the Query Robustness Count.
1.3.6.1.4.1.193.223.2.3080.17.97Scalarpt3080CommsIGMPQueryRobustnessCountread-writecurrentThe Number of Query Replies sent. The higher a number, the more robust IGMP setup is. At the cost of traffic on the network. Note: Changing this parameter does…
1.3.6.1.4.1.193.223.2.3080.17.98Scalarpt3080CommsSeparatedSwitchPortsread-writecurrentWill the ports on the switch in the backplane forward LAN traffic to each other or will they be separated and only forward traffic to/from the modulator/repeat…
1.3.6.1.4.1.193.223.2.3080.17.99Scalarpt3080CommsIGMPVersionread-writecurrentSelect which IGMP Version to use.
1.3.6.1.4.1.193.223.2.3080.17.100Scalarpt3080CommsLocalIpMulticastAddrread-writecurrentThe IP Multicast address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.101Scalarpt3080CommsLocalVlanEnableread-writecurrentEnable/Disable VLAN on this interface.
1.3.6.1.4.1.193.223.2.3080.17.102Scalarpt3080CommsLocalVlanIdread-writecurrentVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any int…
1.3.6.1.4.1.193.223.2.3080.17.103Scalarpt3080CommsLocalServiceSNMPread-writecurrentEnable/Disable SNMP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.104Scalarpt3080CommsLocalServiceSCPIread-writecurrentEnable/Disable SCPI service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.105Scalarpt3080CommsLocalServiceTSoIPread-writecurrentEnable/Disable TSoIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.106Scalarpt3080CommsLocalServiceRIPread-writecurrentEnable/Disable RIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.110Scalarpt3080CommsRemoteIpMulticastAddrread-writecurrentThe IP Multicast address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.111Scalarpt3080CommsRemoteVlanEnableread-writecurrentEnable/Disable VLAN on this interface.
1.3.6.1.4.1.193.223.2.3080.17.112Scalarpt3080CommsRemoteVlanIdread-writecurrentVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any int…
1.3.6.1.4.1.193.223.2.3080.17.113Scalarpt3080CommsRemoteServiceSNMPread-writecurrentEnable/Disable SNMP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.114Scalarpt3080CommsRemoteServiceSCPIread-writecurrentEnable/Disable SCPI service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.115Scalarpt3080CommsRemoteServiceTSoIPread-writecurrentEnable/Disable TSoIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.116Scalarpt3080CommsRemoteServiceWebread-writecurrentEnable/Disable WEB (http) service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.117Scalarpt3080CommsRemoteEnableread-writecurrentEnable/Disable this interface.
1.3.6.1.4.1.193.223.2.3080.17.118Scalarpt3080CommsRemoteServiceRIPread-writecurrentEnable/Disable RIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.120Scalarpt3080CommsGbeAdminIpMulticastAddrread-writecurrentThe IP Multicast address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.121Scalarpt3080CommsGbeAdminVlanEnableread-writecurrentEnable/Disable VLAN on this interface.
1.3.6.1.4.1.193.223.2.3080.17.122Scalarpt3080CommsGbeAdminVlanIdread-writecurrentVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any int…
1.3.6.1.4.1.193.223.2.3080.17.123Scalarpt3080CommsGbeAdminServiceSNMPread-writecurrentEnable/Disable SNMP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.124Scalarpt3080CommsGbeAdminServiceSCPIread-writecurrentEnable/Disable SCPI service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.125Scalarpt3080CommsGbeAdminServiceTSoIPread-writecurrentEnable/Disable TSoIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.126Scalarpt3080CommsGbeAdminServiceWebread-writecurrentEnable/Disable Web (http) service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.127Scalarpt3080CommsGbeAdminEnableread-writecurrentEnable/Disable this interface.
1.3.6.1.4.1.193.223.2.3080.17.128Scalarpt3080CommsGbeAdminServiceRIPread-writecurrentEnable/Disable RIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.150Scalarpt3080CommsBackupEnableread-writecurrentEnable/Disable this interface.
1.3.6.1.4.1.193.223.2.3080.17.151Scalarpt3080CommsBackupPhysicalInterfaceread-writecurrentThe Physical Ethernet Interface of this (virtual) interface.
1.3.6.1.4.1.193.223.2.3080.17.152Scalarpt3080CommsBackupStaticIpAddrread-writecurrentThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.153Scalarpt3080CommsBackupStaticNetmaskread-writecurrentThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.154Scalarpt3080CommsBackupIpMulticastAddrread-writecurrentThe IP Multicast address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.155Scalarpt3080CommsBackupVlanEnableread-writecurrentEnable/Disable VLAN on this interface.
1.3.6.1.4.1.193.223.2.3080.17.156Scalarpt3080CommsBackupVlanIdread-writecurrentVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any int…
1.3.6.1.4.1.193.223.2.3080.17.157Scalarpt3080CommsBackupServiceSNMPread-writecurrentEnable/Disable SNMP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.158Scalarpt3080CommsBackupServiceSCPIread-writecurrentEnable/Disable SCPI service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.159Scalarpt3080CommsBackupServiceTSoIPread-writecurrentEnable/Disable TSoIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.160Scalarpt3080CommsBackupServiceWebread-writecurrentEnable/Disable Web (http) service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.161Scalarpt3080CommsBackupServiceRIPread-writecurrentEnable/Disable RIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.162Scalarpt3080CommsBackupCurrentIpAddrread-onlycurrentThe current IP address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.163Scalarpt3080CommsBackupCurrentNetmaskread-onlycurrentThe current IP netmask for this interface.
1.3.6.1.4.1.193.223.2.3080.17.170Scalarpt3080CommsBackupIpMulticastSourceFilterAddress1read-writecurrentThe IP Multicast Source Filter address no 1 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.171Scalarpt3080CommsBackupIpMulticastSourceFilterAddress2read-writecurrentThe IP Multicast Source Filter address no 2 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.172Scalarpt3080CommsBackupIpMulticastSourceFilterAddress3read-writecurrentThe IP Multicast Source Filter address no 3 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.173Scalarpt3080CommsBackupIpMulticastSourceFilterAddress4read-writecurrentThe IP Multicast Source Filter address no 4 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.174Scalarpt3080CommsBackupIpMulticastSourceFilterAddress5read-writecurrentThe IP Multicast Source Filter address no 5 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.175Scalarpt3080CommsBackupIpMulticastSourceFilterAddress6read-writecurrentThe IP Multicast Source Filter address no 6 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.190Scalarpt3080CommsLocalIpMulticastSourceFilterModeread-writecurrentSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Re…
1.3.6.1.4.1.193.223.2.3080.17.191Scalarpt3080CommsRemoteIpMulticastSourceFilterModeread-writecurrentSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Re…
1.3.6.1.4.1.193.223.2.3080.17.192Scalarpt3080CommsGbeAdminIpMulticastSourceFilterModeread-writecurrentSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Re…
1.3.6.1.4.1.193.223.2.3080.17.193Scalarpt3080CommsBackupIpMulticastSourceFilterModeread-writecurrentSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Re…
1.3.6.1.4.1.193.223.2.3080.17.200Scalarpt3080CommsLocalIpMulticastSourceFilterAddress1read-writecurrentThe IP Multicast Source Filter address no 1 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.201Scalarpt3080CommsLocalIpMulticastSourceFilterAddress2read-writecurrentThe IP Multicast Source Filter address no 2 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.202Scalarpt3080CommsLocalIpMulticastSourceFilterAddress3read-writecurrentThe IP Multicast Source Filter address no 3 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.203Scalarpt3080CommsLocalIpMulticastSourceFilterAddress4read-writecurrentThe IP Multicast Source Filter address no 4 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.204Scalarpt3080CommsLocalIpMulticastSourceFilterAddress5read-writecurrentThe IP Multicast Source Filter address no 5 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.205Scalarpt3080CommsLocalIpMulticastSourceFilterAddress6read-writecurrentThe IP Multicast Source Filter address no 6 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.220Scalarpt3080CommsRemoteIpMulticastSourceFilterAddress1read-writecurrentThe IP Multicast Source Filter address no 1 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.221Scalarpt3080CommsRemoteIpMulticastSourceFilterAddress2read-writecurrentThe IP Multicast Source Filter address no 2 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.222Scalarpt3080CommsRemoteIpMulticastSourceFilterAddress3read-writecurrentThe IP Multicast Source Filter address no 3 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.223Scalarpt3080CommsRemoteIpMulticastSourceFilterAddress4read-writecurrentThe IP Multicast Source Filter address no 4 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.224Scalarpt3080CommsRemoteIpMulticastSourceFilterAddress5read-writecurrentThe IP Multicast Source Filter address no 5 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.225Scalarpt3080CommsRemoteIpMulticastSourceFilterAddress6read-writecurrentThe IP Multicast Source Filter address no 6 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.230Scalarpt3080CommsGbeAdminIpMulticastSourceFilterAddress1read-writecurrentThe IP Multicast Source Filter address no 1 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.231Scalarpt3080CommsGbeAdminIpMulticastSourceFilterAddress2read-writecurrentThe IP Multicast Source Filter address no 2 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.232Scalarpt3080CommsGbeAdminIpMulticastSourceFilterAddress3read-writecurrentThe IP Multicast Source Filter address no 3 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.233Scalarpt3080CommsGbeAdminIpMulticastSourceFilterAddress4read-writecurrentThe IP Multicast Source Filter address no 4 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.234Scalarpt3080CommsGbeAdminIpMulticastSourceFilterAddress5read-writecurrentThe IP Multicast Source Filter address no 5 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.235Scalarpt3080CommsGbeAdminIpMulticastSourceFilterAddress6read-writecurrentThe IP Multicast Source Filter address no 6 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.300Tablept3080CommsStaticRouteTablenot-accessiblecurrentThis table contains the static routing table entries
1.3.6.1.4.1.193.223.2.3080.17.300.1Rowpt3080CommsStaticRouteEntrynot-accessiblecurrentAn entry for the static network routing table
1.3.6.1.4.1.193.223.2.3080.17.300.1.1Columnpt3080CommsStaticRouteNOnot-accessiblecurrentUnique ID for this static route entry
1.3.6.1.4.1.193.223.2.3080.17.300.1.2Columnpt3080CommsStaticRouteTyperead-writecurrentType of a Route table entry.
1.3.6.1.4.1.193.223.2.3080.17.300.1.3Columnpt3080CommsStaticRoutePrefixread-writecurrentThe IP address part of prefix for a route table entry. If the address is 0.0.0.0, the entry will not be used.
1.3.6.1.4.1.193.223.2.3080.17.300.1.4Columnpt3080CommsStaticRoutePrefixSizeread-writecurrentThe number of bits in the network part of the prefix for route table entry $. If the number is 0 (zero), the entry will not be used.
1.3.6.1.4.1.193.223.2.3080.17.300.1.5Columnpt3080CommsStaticRouteTargetread-writecurrentThe target IP address for a route table entry. Only used if pt3080CommsStaticRouteType is normal(1) or recursive(3). If the target address is 0.0.0.0, the entr…
1.3.6.1.4.1.193.223.2.3080.17.300.1.6Columnpt3080CommsStaticRoutePhysicalInterfaceread-writecurrentThe Physical Ethernet Interface to use for a Route table entry. Only used when pt3080CommsStaticRouteType is physicalif(2).
1.3.6.1.4.1.193.223.2.3080.17.419Scalarpt3080CommsSNMPTrapDestination2read-writecurrentThe destination 2 IP address for the SNMP traps.
1.3.6.1.4.1.193.223.2.3080.17.420Scalarpt3080CommsSNMPTrapDestinationPort2read-writecurrentThe UDP port number used for Trap destination 2.
1.3.6.1.4.1.193.223.2.3080.17.779Scalarpt3080CommsSNMPTrapDestination3read-writecurrentThe destination 3 IP address for the SNMP traps.
1.3.6.1.4.1.193.223.2.3080.17.780Scalarpt3080CommsSNMPTrapDestinationPort3read-writecurrentThe UDP port number used for Trap destination 3.
1.3.6.1.4.1.193.223.2.3080.17.1139Scalarpt3080CommsSNMPTrapDestination4read-writecurrentThe destination 4 IP address for the SNMP traps.
1.3.6.1.4.1.193.223.2.3080.17.1140Scalarpt3080CommsSNMPTrapDestinationPort4read-writecurrentThe UDP port number used for Trap destination 4.
1.3.6.1.4.1.193.223.2.3080.17.1499Scalarpt3080CommsSNMPTrapDestination5read-writecurrentThe destination 5 IP address for the SNMP traps.
1.3.6.1.4.1.193.223.2.3080.17.1500Scalarpt3080CommsSNMPTrapDestinationPort5read-writecurrentThe UDP port number used for Trap destination 5.
1.3.6.1.4.1.193.223.2.3080.17.2075Scalarpt3080CommsPortDhcpModeread-writecurrentEnable/Disable DHCP client on this interface.
1.3.6.1.4.1.193.223.2.3080.17.2151Scalarpt3080CommsPortPhysicalInterfaceread-writecurrentThe Physical Ethernet Interface of this (virtual) interface.
1.3.6.1.4.1.193.223.2.3080.17.2152Scalarpt3080CommsPortStaticIpAddrread-writecurrentThe static IP address for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.2153Scalarpt3080CommsPortStaticNetmaskread-writecurrentThe static IP netmask for this interface. Will be used if DHCP is disabled or unavailable.
1.3.6.1.4.1.193.223.2.3080.17.2154Scalarpt3080CommsPortIpMulticastAddrread-writecurrentThe IP Multicast address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.2155Scalarpt3080CommsPortVlanEnableread-writecurrentEnable/Disable VLAN on this interface.
1.3.6.1.4.1.193.223.2.3080.17.2156Scalarpt3080CommsPortVlanIdread-writecurrentVLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any int…
1.3.6.1.4.1.193.223.2.3080.17.2157Scalarpt3080CommsPortServiceSNMPread-writecurrentEnable/Disable SNMP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.2158Scalarpt3080CommsPortServiceSCPIread-writecurrentEnable/Disable SCPI service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.2159Scalarpt3080CommsPortServiceTSoIPread-writecurrentEnable/Disable TSoIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.2160Scalarpt3080CommsPortServiceWebread-writecurrentEnable/Disable Web (http) service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.2161Scalarpt3080CommsPortServiceRIPread-writecurrentEnable/Disable RIP service on this interface.
1.3.6.1.4.1.193.223.2.3080.17.2162Scalarpt3080CommsPortCurrentIpAddrread-onlycurrentThe current IP address for this interface.
1.3.6.1.4.1.193.223.2.3080.17.2163Scalarpt3080CommsPortCurrentNetmaskread-onlycurrentThe current IP netmask for this interface.
1.3.6.1.4.1.193.223.2.3080.17.2170Scalarpt3080CommsPortIpMulticastSourceFilterAddress1read-writecurrentThe IP Multicast Source Filter address no 1 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.2171Scalarpt3080CommsPortIpMulticastSourceFilterAddress2read-writecurrentThe IP Multicast Source Filter address no 2 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.2172Scalarpt3080CommsPortIpMulticastSourceFilterAddress3read-writecurrentThe IP Multicast Source Filter address no 3 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.2173Scalarpt3080CommsPortIpMulticastSourceFilterAddress4read-writecurrentThe IP Multicast Source Filter address no 4 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.2174Scalarpt3080CommsPortIpMulticastSourceFilterAddress5read-writecurrentThe IP Multicast Source Filter address no 5 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.2175Scalarpt3080CommsPortIpMulticastSourceFilterAddress6read-writecurrentThe IP Multicast Source Filter address no 6 for this interface.
1.3.6.1.4.1.193.223.2.3080.17.2193Scalarpt3080CommsPortIpMulticastSourceFilterModeread-writecurrentSpecifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Re…
1.3.6.1.4.1.193.223.2.3080.17.2500Scalarpt3080CommsPortEnableread-writecurrentEnable/Disable this interface.
1.3.6.1.4.1.193.223.2.3080.24Nodept3080Demodulator
1.3.6.1.4.1.193.223.2.3080.24.1Scalarpt3080DemodulatorFollowModeread-writecurrentControls the Demodulators follow mode.
1.3.6.1.4.1.193.223.2.3080.24.2Scalarpt3080Demodulator1Availableread-onlycurrentStatus on the availability of Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.3Scalarpt3080Demodulator1FWVersionread-onlycurrentDemodulator 1 firmware version string
1.3.6.1.4.1.193.223.2.3080.24.4Scalarpt3080Demodulator1OutputTSread-writecurrentControls which TS demodulator 1 shall output
1.3.6.1.4.1.193.223.2.3080.24.5Scalarpt3080Demodulator1MerLimitread-writecurrentLower limit for MER Level
1.3.6.1.4.1.193.223.2.3080.24.6Scalarpt3080Demodulator1PreVirterbiErrorRateLimitread-writecurrentUpper limit for Pre-Virterbi Bit Error Rate
1.3.6.1.4.1.193.223.2.3080.24.7Scalarpt3080Demodulator1PostVirterbiErrorRateLimitread-writecurrentUpper limit for Post-Virterbi Bit Error Rate
1.3.6.1.4.1.193.223.2.3080.24.8Scalarpt3080Demodulator1FelStatusread-onlycurrentReceived signal locked status on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.9Scalarpt3080Demodulator1UncorrectedPacketsread-onlycurrentNumber of uncorrected packets received in Demodulator 1 since boot or since counter was last cleared.
1.3.6.1.4.1.193.223.2.3080.24.11Scalarpt3080Demodulator1Merread-onlycurrentCurrent MER level for Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.12Scalarpt3080Demodulator1PreVirterbiErrorRateread-onlycurrentCurrent Pre-Virterbi Bit Error Rate for Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.13Scalarpt3080Demodulator1PostVirterbiErrorRateread-onlycurrentCurrent Post-Virterbi Bit Error Rate for Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.14Scalarpt3080Demodulator1ActualGuardIntervalread-onlycurrentGuard Interval for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.15Scalarpt3080Demodulator1Actualifftread-onlycurrentIFFT for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.16Scalarpt3080Demodulator1ActualConstellationread-onlycurrentConstellation for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.17Scalarpt3080Demodulator1ActualHierarchyread-onlycurrentHierarchy for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.18Scalarpt3080Demodulator1ActualCodeRateHighPrioread-onlycurrentHigh Priority Code Rate for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.19Scalarpt3080Demodulator1ActualCodeRateLowPrioread-onlycurrentHigh Priority Code Rate for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.20Scalarpt3080Demodulator1ActualDeepInterleaverread-onlycurrentDeep Interleaver for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.21Scalarpt3080Demodulator1ActualMpeFecHighPrioread-onlycurrentHigh Priority MPE/FEC mode for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.22Scalarpt3080Demodulator1ActualMpeFecLowPrioread-onlycurrentLow Priority MPE/FEC mode for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.23Scalarpt3080Demodulator1ActualTimeSlicingHighPrioread-onlycurrentHigh Priority timeslicing mode for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.24Scalarpt3080Demodulator1ActualTimeSlicingLowPrioread-onlycurrentLow Priority timeslicing mode for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.25Scalarpt3080Demodulator1ActualCellIDread-onlycurrentCurrent Cell ID value for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.26Scalarpt3080Demodulator1ActualDVBHModeread-onlycurrentDVB-H mode for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.29Scalarpt3080Demodulator2Availableread-onlycurrentStatus on the availability of Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.30Scalarpt3080Demodulator2FWVersionread-onlycurrentDemodulator 2 firmware version string
1.3.6.1.4.1.193.223.2.3080.24.31Scalarpt3080Demodulator2OutputTSread-writecurrentControls which TS demodulator 2 shall output
1.3.6.1.4.1.193.223.2.3080.24.32Scalarpt3080Demodulator2MerLimitread-writecurrentLower limit for MER Level
1.3.6.1.4.1.193.223.2.3080.24.33Scalarpt3080Demodulator2PreVirterbiErrorRateLimitread-writecurrentUpper limit for Pre-Virterbi Bit Error Rate
1.3.6.1.4.1.193.223.2.3080.24.34Scalarpt3080Demodulator2PostVirterbiErrorRateLimitread-writecurrentUpper limit for Post-Virterbi Bit Error Rate
1.3.6.1.4.1.193.223.2.3080.24.35Scalarpt3080Demodulator2FelStatusread-onlycurrentReceived signal locked status on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.36Scalarpt3080Demodulator2UncorrectedPacketsread-onlycurrentNumber of uncorrected packets received in Demodulator 2 since boot or since counter was last cleared.
1.3.6.1.4.1.193.223.2.3080.24.38Scalarpt3080Demodulator2Merread-onlycurrentCurrent MER level for Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.39Scalarpt3080Demodulator2PreVirterbiErrorRateread-onlycurrentCurrent Pre-Virterbi Bit Error Rate for Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.40Scalarpt3080Demodulator2PostVirterbiErrorRateread-onlycurrentCurrent Post-Virterbi Bit Error Rate for Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.41Scalarpt3080Demodulator2ActualGuardIntervalread-onlycurrentGuard Interval for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.42Scalarpt3080Demodulator2Actualifftread-onlycurrentIFFT for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.43Scalarpt3080Demodulator2ActualConstellationread-onlycurrentConstellation for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.44Scalarpt3080Demodulator2ActualHierarchyread-onlycurrentHierarchy for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.45Scalarpt3080Demodulator2ActualCodeRateHighPrioread-onlycurrentHigh Priority Code Rate for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.46Scalarpt3080Demodulator2ActualCodeRateLowPrioread-onlycurrentHigh Priority Code Rate for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.47Scalarpt3080Demodulator2ActualDeepInterleaverread-onlycurrentDeep Interleaver for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.48Scalarpt3080Demodulator2ActualMpeFecHighPrioread-onlycurrentHigh Priority MPE/FEC mode for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.49Scalarpt3080Demodulator2ActualMpeFecLowPrioread-onlycurrentLow Priority MPE/FEC mode for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.50Scalarpt3080Demodulator2ActualTimeSlicingHighPrioread-onlycurrentHigh Priority timeslicing mode for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.51Scalarpt3080Demodulator2ActualTimeSlicingLowPrioread-onlycurrentLow Priority timeslicing mode for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.24.52Scalarpt3080Demodulator2ActualCellIDread-onlycurrentCurrent Cell ID value for the received signal on Demodulator 1
1.3.6.1.4.1.193.223.2.3080.24.53Scalarpt3080Demodulator2ActualDVBHModeread-onlycurrentDVB-H mode for the received signal on Demodulator 2
1.3.6.1.4.1.193.223.2.3080.25Nodept3080Precorrector
1.3.6.1.4.1.193.223.2.3080.25.1Scalarpt3080PrecorrectorLinearAdaptiveModeread-writecurrentselection of the operational mode for the linear adaptive precorrector <br/>(note: legacy term used for backward compatibility. IDLE Equal to the mode named MO…
1.3.6.1.4.1.193.223.2.3080.25.2Scalarpt3080PrecorrectorLinearModeread-writecurrentselection of the operational mode for the linear precorrector <br/>(note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPAS…
1.3.6.1.4.1.193.223.2.3080.25.3Scalarpt3080PrecorrectorNonlinearAdaptiveModeread-writecurrentselection of the operational mode for the non-linear adaptive precorrector <br/>(note: legacy term used for backward compatibility. IDLE Equal to the mode name…
1.3.6.1.4.1.193.223.2.3080.25.4Scalarpt3080PrecorrectorNonlinearModeread-writecurrentselection of the operational mode for the non-linear precorrector <br/>(note: legacy term used for backward compatibility. MONITORING Equal to the mode named B…
1.3.6.1.4.1.193.223.2.3080.25.6Scalarpt3080PrecorrectorLastTurnAroundTimeread-onlycurrentPrecorrectorLastTurnAroundTime
1.3.6.1.4.1.193.223.2.3080.25.7Scalarpt3080PrecorrectorSecondsSinceLastUpdateread-onlycurrentPrecorrectorSecondsSinceLastUpdate
1.3.6.1.4.1.193.223.2.3080.25.8Scalarpt3080PrecorrectorLinearMonitorSenseBadCountread-onlycurrentNumber of bad/invalid sense counts, made by the linear adaptive precorrector.
1.3.6.1.4.1.193.223.2.3080.25.9Scalarpt3080PrecorrectorNonlinearMonitorSenseBadCountread-onlycurrentNumber of bad/invalid sense counts, made by the nonlinear adaptive precorrector.
1.3.6.1.4.1.193.223.2.3080.25.10Scalarpt3080PrecorrectorLinearAdaptiveAmplitudeRippleEnableread-writecurrentEnable amplitude ripple as a trigger for the AUTORUN and RUNTOTARGET modes
1.3.6.1.4.1.193.223.2.3080.25.11Scalarpt3080PrecorrectorLinearAdaptiveGroupDelayEnableread-writecurrentEnable group delay as a trigger for the AUTORUN and RUNTOTARGET modes
1.3.6.1.4.1.193.223.2.3080.25.12Scalarpt3080PrecorrectorNonlinearAdaptiveLowerShoulderEnableread-writecurrentEnable shoulder level (lower) as a trigger for the AUTORUN and RUNTOTARGET modes
1.3.6.1.4.1.193.223.2.3080.25.13Scalarpt3080PrecorrectorNonlinearAdaptiveUpperShoulderEnableread-writecurrentEnable shoulder level (upper) as a trigger for the AUTORUN and RUNTOTARGET modes
1.3.6.1.4.1.193.223.2.3080.25.14Scalarpt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetHysteresisread-writecurrentDefine a adaptive target level hysteresis for the amplitude ripple
1.3.6.1.4.1.193.223.2.3080.25.15Scalarpt3080PrecorrectorLinearAdaptiveGroupDelayTargetHysteresisread-writecurrentDefine a adaptive target level hysteresis for the group delay
1.3.6.1.4.1.193.223.2.3080.25.16Scalarpt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetHysteresisread-writecurrentDefine a adaptive target level hysteresis for the lower shoulder
1.3.6.1.4.1.193.223.2.3080.25.17Scalarpt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetHysteresisread-writecurrentDefine a adaptive target level hysteresis for the upper shoulder
1.3.6.1.4.1.193.223.2.3080.25.18Scalarpt3080PrecorrectorLinCleanrunread-onlycurrentPrecorrectorLinCleanrun
1.3.6.1.4.1.193.223.2.3080.25.19Scalarpt3080PrecorrectorLinearMonitorIterationsread-onlycurrentNumber of iterations made by the linear adaptive precorrector.
1.3.6.1.4.1.193.223.2.3080.25.20Scalarpt3080PrecorrectorLinearLoadNeutralread-writecurrentPrecorrectorLinearLoadNeutral
1.3.6.1.4.1.193.223.2.3080.25.21Scalarpt3080PrecorrectorLinearLoadFactoryread-writecurrentPrecorrectorLinearLoadFactory
1.3.6.1.4.1.193.223.2.3080.25.22Scalarpt3080PrecorrectorLinearMonitorSenseLevelread-onlycurrentLevel meassured at the linear sense input with offset defined by attenuation
1.3.6.1.4.1.193.223.2.3080.25.23Scalarpt3080PrecorrectorLinearMonitorSenseValidread-onlycurrentIs linear sense input information valid
1.3.6.1.4.1.193.223.2.3080.25.24Scalarpt3080PrecorrectorLinearMonitorStatusread-onlycurrentlinear Precor state
1.3.6.1.4.1.193.223.2.3080.25.25Scalarpt3080PrecorrectorLinearUpdateFactoryCurveread-writecurrentPrecorrectorLinearUpdateFactoryCurve
1.3.6.1.4.1.193.223.2.3080.25.26Scalarpt3080PrecorrectorLinearMonitorAmplitudeRippleread-onlycurrentAmplitude ripple
1.3.6.1.4.1.193.223.2.3080.25.27Scalarpt3080PrecorrectorLinearMonitorGroupDelayread-onlycurrentGroup delay
1.3.6.1.4.1.193.223.2.3080.25.28Scalarpt3080PrecorrectorNonlinearMonitorLowerShoulderLevelread-onlycurrentLower shoulder level
1.3.6.1.4.1.193.223.2.3080.25.29Scalarpt3080PrecorrectorNonlinearMonitorUpperShoulderLevelread-onlycurrentUpper shoulder level
1.3.6.1.4.1.193.223.2.3080.25.30Scalarpt3080PrecorrectorLinearMonitorAmplitudeRippleValidread-onlycurrentIs amplitude ripple information valid
1.3.6.1.4.1.193.223.2.3080.25.31Scalarpt3080PrecorrectorLinearMonitorGroupDelayValidread-onlycurrentIs group delay information valid
1.3.6.1.4.1.193.223.2.3080.25.32Scalarpt3080PrecorrectorNonlinearMonitorLowerShoulderValidread-onlycurrentIs Lower shoulder information valid
1.3.6.1.4.1.193.223.2.3080.25.33Scalarpt3080PrecorrectorNonlinearMonitorUpperShoulderValidread-onlycurrentIs Upper shoulder information valid
1.3.6.1.4.1.193.223.2.3080.25.34Scalarpt3080PrecorrectorNlinCleanrunread-onlycurrentPrecorrectorNlinCleanrun
1.3.6.1.4.1.193.223.2.3080.25.35Scalarpt3080PrecorrectorNonlinearMonitorIterationsread-onlycurrentNumber of iterations made by the nonlinear adaptive precorrector.
1.3.6.1.4.1.193.223.2.3080.25.36Scalarpt3080PrecorrectorNonlinearLoadNeutralread-writecurrentPrecorrectorNonlinearLoadNeutral
1.3.6.1.4.1.193.223.2.3080.25.37Scalarpt3080PrecorrectorNonlinearLoadFactoryread-writecurrentPrecorrectorNonlinearLoadFactory
1.3.6.1.4.1.193.223.2.3080.25.38Scalarpt3080PrecorrectorNonlinearMonitorSenseLevelread-onlycurrentLevel meassured at the Nonlinear sense input with offset defined by attenuation
1.3.6.1.4.1.193.223.2.3080.25.39Scalarpt3080PrecorrectorNonlinearMonitorSenseValidread-onlycurrentIs Nonlinear sense input information valid
1.3.6.1.4.1.193.223.2.3080.25.40Scalarpt3080PrecorrectorNonlinearMonitorStatusread-onlycurrentNonlinear Precor state
1.3.6.1.4.1.193.223.2.3080.25.41Scalarpt3080PrecorrectorNonlinearUpdateFactoryCurveread-writecurrentPrecorrectorNonlinearUpdateFactoryCurve
1.3.6.1.4.1.193.223.2.3080.25.42Scalarpt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetLevelread-writecurrentDefine a adaptive target level for the amplitude ripple
1.3.6.1.4.1.193.223.2.3080.25.43Scalarpt3080PrecorrectorLinearAdaptiveGroupDelayTargetLevelread-writecurrentDefine a adaptive target level for the group delay
1.3.6.1.4.1.193.223.2.3080.25.44Scalarpt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetLevelread-writecurrentDefine a adaptive target level for the lower shoulder
1.3.6.1.4.1.193.223.2.3080.25.45Scalarpt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetLevelread-writecurrentDefine a adaptive target level for the upper shoulder
1.3.6.1.4.1.193.223.2.3080.25.46Scalarpt3080PrecorrectorLinearSenseEnableread-writecurrentBy using this, it is possible to control wether to use the linear Sense Input or not.
1.3.6.1.4.1.193.223.2.3080.25.47Scalarpt3080PrecorrectorLinearMonitorDiscartedIterationsread-onlycurrentNumber of iterations discarded by the linear adaptive precorrector due to noisy signal samples.
1.3.6.1.4.1.193.223.2.3080.25.48Scalarpt3080PrecorrectorNonlinearSenseEnableread-writecurrentBy using this, it is possible to control wether to use the nonlinear Sense Input or not.
1.3.6.1.4.1.193.223.2.3080.25.49Scalarpt3080PrecorrectorNonlinearMonitorDiscartedIterationsread-onlycurrentNumber of iterations discarded by the non-linear adaptive precorrector dur to noisy signal samples.
1.3.6.1.4.1.193.223.2.3080.25.50Scalarpt3080PrecorrectorNonlinearMonitorMerread-onlycurrentMER
1.3.6.1.4.1.193.223.2.3080.25.51Scalarpt3080PrecorrectorNonlinearMonitorMerValidread-onlycurrentIs MER information valid
1.3.6.1.4.1.193.223.2.3080.25.52Scalarpt3080PrecorrectorNonlinearMonitorPaprread-onlycurrentPAPR level
1.3.6.1.4.1.193.223.2.3080.25.53Scalarpt3080PrecorrectorNonlinearMonitorPaprValidread-onlycurrentIs Papr information valid
1.3.6.1.4.1.193.223.2.3080.25.54Scalarpt3080PrecorrectorNonlinearAdaptiveAveragingread-writecurrentChoose wether or not to use averaging calulations
1.3.6.1.4.1.193.223.2.3080.25.55Scalarpt3080PrecorrectorNonlinearAdaptiveMaxRfPaprEnableread-writecurrentEnable the modulator's output PAPR limiter function
1.3.6.1.4.1.193.223.2.3080.25.56Scalarpt3080PrecorrectorNonlinearAdaptiveMaxRfPaprLimitread-writecurrentMaximum RF PAPR Limitation
1.3.6.1.4.1.193.223.2.3080.25.57Scalarpt3080PrecorrectorNonlinearAdaptiveMerTargetread-writecurrentDefine a target level for the MER
1.3.6.1.4.1.193.223.2.3080.25.58Scalarpt3080PrecorrectorNonlinearAdaptiveMerTargetHysteresisread-writecurrentDefine a target MER hysteresis
1.3.6.1.4.1.193.223.2.3080.25.59Scalarpt3080PrecorrectorNonlinearAdaptiveMerEnableread-writecurrentEnable MER as a trigger for the AUTORUN and RUNTOTARGET modes
1.3.6.1.4.1.193.223.2.3080.25.60Scalarpt3080PrecorrectorPaprClippingread-writecurrentset the built-in peak clipper function. The value 'max' corresponds to an unclipped COFDM signal (12dB peak to average ratio). The value 'min' correspondsto CO…
1.3.6.1.4.1.193.223.2.3080.25.61Scalarpt3080PrecorrectorPaprShapingread-writecurrentSet the output peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, in…
1.3.6.1.4.1.193.223.2.3080.25.63Scalarpt3080PrecorrectorClipperAdaptiveModeread-writecurrentSelection of the operational mode for the adaptive clipper function
1.3.6.1.4.1.193.223.2.3080.25.64Scalarpt3080PrecorrectorClipperMonitorStatusread-onlycurrentOptiClipper state
1.3.6.1.4.1.193.223.2.3080.25.65Scalarpt3080PrecorrectorClipperMonitorShoulderLevelLowerread-onlycurrentLower shoulder level
1.3.6.1.4.1.193.223.2.3080.25.66Scalarpt3080PrecorrectorClipperMonitorShoulderLevelLowerValidread-onlycurrentIs Lower shoulder information valid
1.3.6.1.4.1.193.223.2.3080.25.67Scalarpt3080PrecorrectorClipperMonitorShoulderLevelUpperread-onlycurrentUpper shoulder level
1.3.6.1.4.1.193.223.2.3080.25.68Scalarpt3080PrecorrectorClipperMonitorShoulderLevelUpperValidread-onlycurrentIs Upper shoulder information valid
1.3.6.1.4.1.193.223.2.3080.25.69Scalarpt3080PrecorrectorClipperMonitorMerread-onlycurrentMER level
1.3.6.1.4.1.193.223.2.3080.25.70Scalarpt3080PrecorrectorClipperMonitorMerValidread-onlycurrentIs MER information valid
1.3.6.1.4.1.193.223.2.3080.25.71Scalarpt3080PrecorrectorClipperMonitorPaprread-onlycurrentPAPR level
1.3.6.1.4.1.193.223.2.3080.25.72Scalarpt3080PrecorrectorClipperMonitorPaprValidread-onlycurrentIs Papr information valid
1.3.6.1.4.1.193.223.2.3080.25.73Scalarpt3080PrecorrectorClipperMonitorIterationsread-onlycurrentNumber of Iterations performed by the OptiClipper algorithm
1.3.6.1.4.1.193.223.2.3080.25.74Scalarpt3080PrecorrectorClipperModeread-writecurrentSelection between no, static (manual) and adaptive clipper function
1.3.6.1.4.1.193.223.2.3080.25.75Scalarpt3080PrecorrectorClipperAdaptiveread-onlycurrentClipper shaped by the OptiClipper algorithm
1.3.6.1.4.1.193.223.2.3080.25.76Scalarpt3080PrecorrectorClipperEnableread-onlycurrentClipper enable
1.3.6.1.4.1.193.223.2.3080.25.77Scalarpt3080PrecorrectorNonlinearAttenuationread-writecurrentDefine a attenuation level for the sense input
1.3.6.1.4.1.193.223.2.3080.25.78Scalarpt3080PrecorrectorLinearAttenuationread-writecurrentDefine a attenuation level for the sense input
1.3.6.1.4.1.193.223.2.3080.25.79Scalarpt3080PrecorrectorLinearAdaptiveread-onlycurrentLinear precorrection curve active in the system
1.3.6.1.4.1.193.223.2.3080.25.80Scalarpt3080PrecorrectorNonlinearAdaptiveread-onlycurrentNon-Linear precorrection curve active in the system
1.3.6.1.4.1.193.223.2.3080.25.81Scalarpt3080PrecorrectorClipperAdaptiveShapingread-writecurrentDepricated Therefore min and max value are set to 100% Set the peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where th…
1.3.6.1.4.1.193.223.2.3080.26Nodept3080Reception
1.3.6.1.4.1.193.223.2.3080.26.1Scalarpt3080ReceptionRFFrequencyread-writecurrentDefines the reception frequency for the tuner.
1.3.6.1.4.1.193.223.2.3080.26.2Scalarpt3080ReceptionRFFrequencyOffsetread-writecurrentDefines the offset to be added to the reception frequency for the tuner.
1.3.6.1.4.1.193.223.2.3080.26.3Scalarpt3080ReceptionIFInputPolicyread-writecurrentControls RF/IF reception Policy
1.3.6.1.4.1.193.223.2.3080.26.4Scalarpt3080ReceptionIFFrequencyread-writecurrentDefines the reception frequency for the tuner.
1.3.6.1.4.1.193.223.2.3080.26.5Scalarpt3080ReceptionIFPolarityread-writecurrentControls IF reception Polarity
1.3.6.1.4.1.193.223.2.3080.26.6Scalarpt3080ReceptionRFSquelchEnableread-writecurrentControls the squelch function.
1.3.6.1.4.1.193.223.2.3080.26.7Scalarpt3080ReceptionRFSquelchThresholdread-writecurrentDefines the Squelch function threshold.
1.3.6.1.4.1.193.223.2.3080.26.8Scalarpt3080ReceptionRFSquelchHysteresisread-writecurrentDefines the Squelch function Hysteresis.
1.3.6.1.4.1.193.223.2.3080.26.9Scalarpt3080ReceptionGainControlread-writecurrentControls the gain function mode.
1.3.6.1.4.1.193.223.2.3080.26.10Scalarpt3080ReceptionGainManualValueread-writecurrentDefines manual gain value.
1.3.6.1.4.1.193.223.2.3080.26.11Scalarpt3080ReceptionGainLimitEnableread-writecurrentControls the Reception RF Gain limit function.
1.3.6.1.4.1.193.223.2.3080.26.12Scalarpt3080ReceptionGainLimitread-writecurrentDefines gain limit value.
1.3.6.1.4.1.193.223.2.3080.26.13Scalarpt3080ReceptionGainCurrentread-onlycurrentThe current total gain.
1.3.6.1.4.1.193.223.2.3080.26.18Scalarpt3080ReceptionIFRFtoIFHoldoverDelayread-writecurrentThe holdover delay for switching reception from RF to IF input.
1.3.6.1.4.1.193.223.2.3080.26.19Scalarpt3080ReceptionIFIFtoRFHoldoverDelayread-writecurrentThe holdover delay for switching reception from IF to RF input.
1.3.6.1.4.1.193.223.2.3080.26.20Scalarpt3080ReceptionIFInputread-onlycurrentShows the current RF/IF input selected
1.3.6.1.4.1.193.223.2.3080.26.21Scalarpt3080ReceptionRFInputLevelread-onlycurrentThe current RF input level on the tuner.
1.3.6.1.4.1.193.223.2.3080.26.22Scalarpt3080ReceptionIFInputLevelread-onlycurrentShows the current IF input level
1.3.6.1.4.1.193.223.2.3080.26.23Scalarpt3080ReceptionBandwidthread-writecurrentControls reception bandwidth
1.3.6.1.4.1.193.223.2.3080.26.24Scalarpt3080ReceptionRFPolarityread-writecurrentControls RF reception Polarity
1.3.6.1.4.1.193.223.2.3080.26.25Scalarpt3080ReceptionRFInputLevelHysteresisread-writecurrentDefines the Input Level Hysteresis.
1.3.6.1.4.1.193.223.2.3080.26.26Scalarpt3080ReceptionRFInputLevelThresholdread-writecurrentDefines the Input level threshold.
1.3.6.1.4.1.193.223.2.3080.26.30Scalarpt3080ReceptionAGCModeread-writecurrentControls the AGC function mode.
1.3.6.1.4.1.193.223.2.3080.26.31Scalarpt3080ReceptionAGCHysteresisread-writecurrentDefines the AGC function Hysteresis.
1.3.6.1.4.1.193.223.2.3080.26.35Scalarpt3080ReceptionRFTrackingFilterEnableread-writecurrentControls the Reception RF Tracking Filter.
1.3.6.1.4.1.193.223.2.3080.26.36Scalarpt3080ReceptionRFifLevelread-onlycurrentThe current if level from the tuner.
1.3.6.1.4.1.193.223.2.3080.26.37Scalarpt3080ReceptionRFNominalInputLevelread-writecurrentThe nominal input level on the tuner. The dynamic range of the tuner is from 20dB below nominal level to nominal level
1.3.6.1.4.1.193.223.2.3080.26.40Scalarpt3080ReceptionTunerHWVersionread-onlycurrentThe tuner HW version.
1.3.6.1.4.1.193.223.2.3080.26.41Scalarpt3080ReceptionTunerHWTyperead-onlycurrentThe tuner HW type.
1.3.6.1.4.1.193.223.2.3080.26.42Scalarpt3080ReceptionTunerHWIDread-onlycurrentThe tuner HW ID.
1.3.6.1.4.1.193.223.2.3080.26.43Scalarpt3080ReceptionTunerHWSerialNumberread-onlycurrentThe tuner HW Serial Number.
1.3.6.1.4.1.193.223.2.3080.26.44Scalarpt3080ReceptionTunerHWCalibrationDateread-onlycurrentThe tuner HW Calibration Date.
1.3.6.1.4.1.193.223.2.3080.26.45Scalarpt3080ReceptionTunerHWCalibrationDataVersionread-onlycurrentThe tuner HW Calibration Data Version.
1.3.6.1.4.1.193.223.2.3080.26.46Scalarpt3080ReceptionTunerHWCalibrationSWVersionread-onlycurrentThe tuner HW Calibration SW Version.
1.3.6.1.4.1.193.223.2.3080.27Nodept3080Backplane
1.3.6.1.4.1.193.223.2.3080.27.1Scalarpt3080BackplanePolarityHardMuteread-writecurrentSet the polarity of the Hard Mute input pin on the PTT2 backplane.
1.3.6.1.4.1.193.223.2.3080.27.2Scalarpt3080BackplanePolarityRFFailread-writecurrentSet the polarity of the RF Fail output pin on the PTT2 backplane.
1.3.6.1.4.1.193.223.2.3080.30Nodept3080ASI
1.3.6.1.4.1.193.223.2.3080.30.1Scalarpt3080ASIInput1SyncTimeoutread-writecurrentSpecifies the maximum time accepted between received TS packages.
1.3.6.1.4.1.193.223.2.3080.30.2Scalarpt3080ASIInput1DataErrorLimitread-writecurrentSpecifies the alarm limit for date error rate.
1.3.6.1.4.1.193.223.2.3080.30.3Scalarpt3080ASIInput1SyncStatusread-onlycurrentCurrent state of the sync detector
1.3.6.1.4.1.193.223.2.3080.30.4Scalarpt3080ASIInput1SyncSignalread-onlycurrentCurrent state of the sync detector signal type
1.3.6.1.4.1.193.223.2.3080.30.5Scalarpt3080ASIInput1SyncTSSizeread-onlycurrentCurrent TS packet size determined by the sync detector
1.3.6.1.4.1.193.223.2.3080.30.6Scalarpt3080ASIInput1LineErrorsread-onlycurrentCounts the number of line errors including IDLE stuffing.
1.3.6.1.4.1.193.223.2.3080.30.7Scalarpt3080ASIInput1LineRateread-onlycurrentCurrent line rate
1.3.6.1.4.1.193.223.2.3080.30.8Scalarpt3080ASIInput1LineErrorRateread-onlycurrentCurrent line error rate
1.3.6.1.4.1.193.223.2.3080.30.9Scalarpt3080ASIInput1DataErrorsread-onlycurrentCounts the number of data errors excluding IDLE stuffing.
1.3.6.1.4.1.193.223.2.3080.30.10Scalarpt3080ASIInput1DataRateread-onlycurrentCurrent data rate
1.3.6.1.4.1.193.223.2.3080.30.11Scalarpt3080ASIInput1DataErrorRateread-onlycurrentCurrent data error rate
1.3.6.1.4.1.193.223.2.3080.30.12Scalarpt3080ASIInput1ClearErrorCountersread-writecurrentClear all error counters and reset all rates
1.3.6.1.4.1.193.223.2.3080.30.51Scalarpt3080ASIInput2SyncTimeoutread-writecurrentSpecifies the maximum time accepted between received TS packages.
1.3.6.1.4.1.193.223.2.3080.30.52Scalarpt3080ASIInput2DataErrorLimitread-writecurrentSpecifies the alarm limit for date error rate.
1.3.6.1.4.1.193.223.2.3080.30.53Scalarpt3080ASIInput2SyncStatusread-onlycurrentCurrent state of the sync detector
1.3.6.1.4.1.193.223.2.3080.30.54Scalarpt3080ASIInput2SyncSignalread-onlycurrentCurrent state of the sync detector signal type
1.3.6.1.4.1.193.223.2.3080.30.55Scalarpt3080ASIInput2SyncTSSizeread-onlycurrentCurrent TS packet size determined by the sync detector
1.3.6.1.4.1.193.223.2.3080.30.56Scalarpt3080ASIInput2LineErrorsread-onlycurrentCounts the number of line errors including IDLE stuffing.
1.3.6.1.4.1.193.223.2.3080.30.57Scalarpt3080ASIInput2LineRateread-onlycurrentCurrent line rate
1.3.6.1.4.1.193.223.2.3080.30.58Scalarpt3080ASIInput2LineErrorRateread-onlycurrentCurrent line error rate
1.3.6.1.4.1.193.223.2.3080.30.59Scalarpt3080ASIInput2DataErrorsread-onlycurrentCounts the number of data errors excluding IDLE stuffing.
1.3.6.1.4.1.193.223.2.3080.30.60Scalarpt3080ASIInput2DataRateread-onlycurrentCurrent data rate
1.3.6.1.4.1.193.223.2.3080.30.61Scalarpt3080ASIInput2DataErrorRateread-onlycurrentCurrent data error rate
1.3.6.1.4.1.193.223.2.3080.30.62Scalarpt3080ASIInput2ClearErrorCountersread-writecurrentClear all error counters and reset all rates
1.3.6.1.4.1.193.223.2.3080.64Nodept3080Notifs
1.3.6.1.4.1.193.223.2.3080.64.0Nodept3080Notif
1.3.6.1.4.1.193.223.2.3080.64.0.3Notificationpt3080NotifModulatorAlarmcurrentModulator Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.5Notificationpt3080NotifTSPrimaryAlarmcurrentASI TS Primary Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.6Notificationpt3080NotifTSSecondaryAlarmcurrentASI TS Secondary Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.7Notificationpt3080NotifSFNAlarmcurrentSFN Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.8Notificationpt3080NotifRefenceClockAlarmcurrentReference Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.9Notificationpt3080NotifRFAlarmcurrentRF Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.10Notificationpt3080NotifGNSSAlarmcurrentGNSS Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.12Notificationpt3080NotifTSoIPAlarmcurrentTSoIP Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.13Notificationpt3080NotifExternalAlarmcurrentExternal Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.14Notificationpt3080NotifHWMonitorAlarmcurrentHW Monitor Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.15Notificationpt3080NotifCommAlarmcurrentCommunications Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.16Notificationpt3080NotifASIAlarmcurrentASI Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.18Notificationpt3080NotifInternalAlarmcurrentInternal Alarms
1.3.6.1.4.1.193.223.2.3080.64.0.21Notificationpt3080NotifTSPrimarySyncLossAlarmcurrentTS Primary Sync Loss
1.3.6.1.4.1.193.223.2.3080.64.0.22Notificationpt3080NotifTSPrimarySyncErrorAlarmcurrentTS Primary Sync Error
1.3.6.1.4.1.193.223.2.3080.64.0.23Notificationpt3080NotifTSPrimaryPCRErrorAlarmcurrentTS Primary PCR Error
1.3.6.1.4.1.193.223.2.3080.64.0.24Notificationpt3080NotifTSPrimaryPATLossAlarmcurrentTS Primary PAT Loss
1.3.6.1.4.1.193.223.2.3080.64.0.25Notificationpt3080NotifTSPrimaryTSIDWrongAlarmcurrentTS Primary Transport Stream ID
1.3.6.1.4.1.193.223.2.3080.64.0.26Notificationpt3080NotifTSPrimaryNWIDWrongAlarmcurrentTS Primary Network ID
1.3.6.1.4.1.193.223.2.3080.64.0.27Notificationpt3080NotifTSPrimaryStuffingRateExceededAlarmcurrentTS Primary Stuffing Rate
1.3.6.1.4.1.193.223.2.3080.64.0.28Notificationpt3080NotifTSPrimaryBufferPoolExceededAlarmcurrentTS Primary Buffer Pool
1.3.6.1.4.1.193.223.2.3080.64.0.29Notificationpt3080NotifTSPrimarySTSJitterExceededAlarmcurrentTS Primary STS Jitter
1.3.6.1.4.1.193.223.2.3080.64.0.30Notificationpt3080NotifTSPrimaryMIPDataMissingAlarmcurrentTS Primary MIP Data Missing
1.3.6.1.4.1.193.223.2.3080.64.0.31Notificationpt3080NotifTSPrimaryMIPPriorityBadAlarmcurrentTS Primary Bad Priority in MIP
1.3.6.1.4.1.193.223.2.3080.64.0.32Notificationpt3080NotifTSSecondarySyncLossAlarmcurrentTS Secondary Sync Loss
1.3.6.1.4.1.193.223.2.3080.64.0.33Notificationpt3080NotifTSSecondarySyncErrorAlarmcurrentTS Secondary Sync Error
1.3.6.1.4.1.193.223.2.3080.64.0.34Notificationpt3080NotifTSSecondaryPCRErrorAlarmcurrentTS Secondary PCR Error
1.3.6.1.4.1.193.223.2.3080.64.0.35Notificationpt3080NotifTSSecondaryPATLossAlarmcurrentTS Secondary PAT Loss
1.3.6.1.4.1.193.223.2.3080.64.0.36Notificationpt3080NotifTSSecondaryTSIDWrongAlarmcurrentTS Secondary Transport Stream ID
1.3.6.1.4.1.193.223.2.3080.64.0.37Notificationpt3080NotifTSSecondaryNWIDWrongAlarmcurrentTS Secondary Network ID
1.3.6.1.4.1.193.223.2.3080.64.0.38Notificationpt3080NotifTSSecondaryStuffingRateExceededAlarmcurrentTS Secondary Stuffing Rate
1.3.6.1.4.1.193.223.2.3080.64.0.39Notificationpt3080NotifTSSecondaryBufferPoolExceededAlarmcurrentTS Secondary Buffer Pool
1.3.6.1.4.1.193.223.2.3080.64.0.40Notificationpt3080NotifTSSecondarySTSJitterExceededAlarmcurrentTS Secondary STS Jitter
1.3.6.1.4.1.193.223.2.3080.64.0.41Notificationpt3080NotifTSSecondaryMIPDataMissingAlarmcurrentTS Secondary MIP Data Missing
1.3.6.1.4.1.193.223.2.3080.64.0.42Notificationpt3080NotifTSSecondaryMIPPriorityBadAlarmcurrentTS Secondary Bad Priority in MIP
1.3.6.1.4.1.193.223.2.3080.64.0.44Notificationpt3080NotifRFOverloadProtectionAlarmcurrentOverload Protection
1.3.6.1.4.1.193.223.2.3080.64.0.55Notificationpt3080NotifCommeth0AlarmcurrentETH0 Conn. State
1.3.6.1.4.1.193.223.2.3080.64.0.56Notificationpt3080NotifCommeth1AlarmcurrentETH1 Conn. State
1.3.6.1.4.1.193.223.2.3080.64.0.57Notificationpt3080NotifCommeth2AlarmcurrentETH2 Conn. State
1.3.6.1.4.1.193.223.2.3080.64.0.58Notificationpt3080NotifCommeth3AlarmcurrentETH3 Conn. State
1.3.6.1.4.1.193.223.2.3080.64.0.59Notificationpt3080NotifCommeth4AlarmcurrentETH4 Conn. State
1.3.6.1.4.1.193.223.2.3080.64.0.72Notificationpt3080NotifExternalInput1AlarmcurrentAlarm Input 1
1.3.6.1.4.1.193.223.2.3080.64.0.73Notificationpt3080NotifExternalInput2AlarmcurrentAlarm Input 2
1.3.6.1.4.1.193.223.2.3080.64.0.74Notificationpt3080NotifExternalInput3AlarmcurrentAlarm Input 3
1.3.6.1.4.1.193.223.2.3080.64.0.75Notificationpt3080NotifExternalInput4AlarmcurrentAlarm Input 4
1.3.6.1.4.1.193.223.2.3080.64.0.76Notificationpt3080NotifRefenceClockExtern1PPSLossAlarmcurrentExt. 1PPS Loss
1.3.6.1.4.1.193.223.2.3080.64.0.77Notificationpt3080NotifRefenceClockIntern1PPSLossAlarmcurrentInt. 10MHz Loss
1.3.6.1.4.1.193.223.2.3080.64.0.78Notificationpt3080NotifRefenceClockExtern10MHzLossAlarmcurrentExt. 10MHz Loss
1.3.6.1.4.1.193.223.2.3080.64.0.79Notificationpt3080NotifRFAlcRangeAlarmcurrentALC Range
1.3.6.1.4.1.193.223.2.3080.64.0.80Notificationpt3080NotifSFNResyncAlarmcurrentSFN Resync Error
1.3.6.1.4.1.193.223.2.3080.64.0.81Notificationpt3080NotifSFNTSPrimaryMaxDelayOffsetExceededAlarmcurrentPrimary SFN Max Delay + Offset OOR
1.3.6.1.4.1.193.223.2.3080.64.0.82Notificationpt3080NotifSFNTSPrimaryNetworkDelayExceededAlarmcurrentPrimary SFN NW Delay Greater Than Max
1.3.6.1.4.1.193.223.2.3080.64.0.84Notificationpt3080NotifSFNTSSecondaryMaxDelayOffsetExceededAlarmcurrentSecondary SFN Max. Delay + Offset OOR
1.3.6.1.4.1.193.223.2.3080.64.0.85Notificationpt3080NotifSFNTSSecondaryNetworkDelayExceededAlarmcurrentSecondary SFN NW Delay Greater Than Max
1.3.6.1.4.1.193.223.2.3080.64.0.87Notificationpt3080NotifRFLevelOutOfRangeAlarmcurrentRF Level Out of Range
1.3.6.1.4.1.193.223.2.3080.64.0.89Notificationpt3080NotifRefenceClockNTPSyncLossAlarmcurrentNTP Sync Loss
1.3.6.1.4.1.193.223.2.3080.64.0.92Notificationpt3080NotifSFNTSPrimarySeamlessDelayTooSmallAlarmcurrentPrimary Delay Margin too Small for Seamless and Holdover
1.3.6.1.4.1.193.223.2.3080.64.0.93Notificationpt3080NotifSFNTSPrimaryMIPConfigErrorAlarmcurrentPrimary SFN and MIP Config Differ
1.3.6.1.4.1.193.223.2.3080.64.0.94Notificationpt3080NotifSFNTSSecondarySeamlessDelayTooSmallAlarmcurrentSecondary Delay Margin too Small for Seamless and Holdover
1.3.6.1.4.1.193.223.2.3080.64.0.95Notificationpt3080NotifSFNTSSecondaryMIPConfigErrorAlarmcurrentSecondary SFN and MIP Config Differ
1.3.6.1.4.1.193.223.2.3080.64.0.98Notificationpt3080NotifGNSSUnlockedAlarmcurrentGNSS Unlocked
1.3.6.1.4.1.193.223.2.3080.64.0.107Notificationpt3080NotifGNSSAntennaFaultAlarmcurrentGNSS Antenna Fault
1.3.6.1.4.1.193.223.2.3080.64.0.108Notificationpt3080NotifGNSSHoldOverAlarmcurrentGNSS Holdover
1.3.6.1.4.1.193.223.2.3080.64.0.109Notificationpt3080NotifRefenceClockExternal10MHzHoldOverAlarmcurrentExt. 10MHz Ref Holdover
1.3.6.1.4.1.193.223.2.3080.64.0.110Notificationpt3080NotifRefenceClockExternal1PPSHoldOverAlarmcurrentExt. 1PPS Ref Holdover
1.3.6.1.4.1.193.223.2.3080.64.0.113Notificationpt3080NotifASIASI1ErrorRateEceeededAlarmcurrentASI-IN1 Error Rate
1.3.6.1.4.1.193.223.2.3080.64.0.114Notificationpt3080NotifASIASI2ErrorRateEceeededAlarmcurrentASI-IN2 Error Rate
1.3.6.1.4.1.193.223.2.3080.64.0.115Notificationpt3080NotifTSoIPRx1PackageErrorRationExceededAlarmcurrentTSoIP RX1 Package Error Ratio Exceeded
1.3.6.1.4.1.193.223.2.3080.64.0.117Notificationpt3080NotifTSoIPRx2PackageErrorRationExceededAlarmcurrentTSoIP RX2 Package Error Ratio Exceeded
1.3.6.1.4.1.193.223.2.3080.64.0.119Notificationpt3080NotifTSoIPRx1SyncLossAlarmcurrentTSoIP RX1 Signal Loss
1.3.6.1.4.1.193.223.2.3080.64.0.121Notificationpt3080NotifTSoIPRx2SyncLossAlarmcurrentTSoIP RX2 Signal Loss
1.3.6.1.4.1.193.223.2.3080.64.0.129Notificationpt3080NotifInternalBackplaneAlarmcurrentBackplane Status
1.3.6.1.4.1.193.223.2.3080.64.0.132Notificationpt3080NotifInternalReferenceClockAlarmcurrentReference Status
1.3.6.1.4.1.193.223.2.3080.64.0.134Notificationpt3080NotifInternalUpConverterAlarmcurrentUpconverter Status
1.3.6.1.4.1.193.223.2.3080.64.0.135Notificationpt3080NotifInternalDownConverterAlarmcurrentDownconverter Status
1.3.6.1.4.1.193.223.2.3080.64.0.136Notificationpt3080NotifInternalMainboardAlarmcurrentMain board Status
1.3.6.1.4.1.193.223.2.3080.64.0.137Notificationpt3080NotifInternalBatteryAlarmcurrentMain Board Battery
1.3.6.1.4.1.193.223.2.3080.64.0.139Notificationpt3080NotifInternalFirmware1AlarmcurrentFirmware 1 Status
1.3.6.1.4.1.193.223.2.3080.64.0.142Notificationpt3080NotifInternalGNSSAlarmcurrentGNSS Status
1.3.6.1.4.1.193.223.2.3080.64.0.143Notificationpt3080NotifInternalSatelliteAlarmcurrentSatrecv Status
1.3.6.1.4.1.193.223.2.3080.64.0.146Notificationpt3080NotifInternalEthAlarmcurrentEtherNet Port Failure
1.3.6.1.4.1.193.223.2.3080.64.0.156Notificationpt3080NotifHWMonitorFPGAAlarmcurrentMain Board FPGA Temperature
1.3.6.1.4.1.193.223.2.3080.64.0.157Notificationpt3080NotifHWMonitorMainBoardCPUTemperatureAlarmcurrentMain Board CPU Temperature
1.3.6.1.4.1.193.223.2.3080.64.0.158Notificationpt3080NotifHWMonitorMainBoardTemperatureAlarmcurrentMain Board Temperature
1.3.6.1.4.1.193.223.2.3080.64.0.159Notificationpt3080NotifHWMonitorLeftFanAlarmcurrentLeft Chassis Fan
1.3.6.1.4.1.193.223.2.3080.64.0.160Notificationpt3080NotifHWMonitorRightFan2AlarmcurrentRight Chassis Fan
1.3.6.1.4.1.193.223.2.3080.64.0.162Notificationpt3080NotifHWMonitorBackplaneTemperatureAlarmcurrentBackplane Temperature
1.3.6.1.4.1.193.223.2.3080.64.0.180Notificationpt3080NotifTSPrimaryInputTSHoldOverAlarmcurrentInput TS Holdover
1.3.6.1.4.1.193.223.2.3080.64.0.182Notificationpt3080NotifInternalPLLUnlockedAlarmcurrentPLL Out of Lock
1.3.6.1.4.1.193.223.2.3080.64.0.183Notificationpt3080NotifExternalInput5AlarmcurrentAlarm Input 5
1.3.6.1.4.1.193.223.2.3080.64.0.184Notificationpt3080NotifSFNUntimedModeAlarmcurrentSFN Mode Untimed
1.3.6.1.4.1.193.223.2.3080.64.0.185Notificationpt3080NotifSFNFreeRunningModeAlarmcurrentSFN Mode Free Running
1.3.6.1.4.1.193.223.2.3080.64.0.186Notificationpt3080NotifExternalInput6AlarmcurrentAlarm Input 6
1.3.6.1.4.1.193.223.2.3080.64.0.187Notificationpt3080NotifExternalInput7AlarmcurrentAlarm Input 7
1.3.6.1.4.1.193.223.2.3080.64.0.188Notificationpt3080NotifExternalInput8AlarmcurrentAlarm Input 8
1.3.6.1.4.1.193.223.2.3080.64.0.190Notificationpt3080NotifTSPrimaryDelayMarginAlarmcurrentTS Primary Delay Margin
1.3.6.1.4.1.193.223.2.3080.64.0.191Notificationpt3080NotifTSSecondaryDelayMarginAlarmcurrentTS Secondary Delay Margin
1.3.6.1.4.1.193.223.2.3080.64.1Scalarpt3080NotifMessageaccessible-for-notifycurrentThe current alarm notification message
1.3.6.1.4.1.193.223.2.3080.64.2Scalarpt3080NotifStateaccessible-for-notifycurrentThe current alarm notification state
1.3.6.1.4.1.193.223.2.3080.64.3Scalarpt3080NotifLocalTimeaccessible-for-notifycurrentThe time the current alarm notification state changed
1.3.6.1.4.1.193.223.2.3080.100Nodept3080Conformance
1.3.6.1.4.1.193.223.2.3080.100.1Nodept3080Compliances
1.3.6.1.4.1.193.223.2.3080.100.1.1Compliancept3080CompliancecurrentThe compliance statement for systems supporting the this MIB.
1.3.6.1.4.1.193.223.2.3080.100.2Nodept3080Groups
1.3.6.1.4.1.193.223.2.3080.100.2.1Grouppt3080SystemGroupcurrentSystem group
1.3.6.1.4.1.193.223.2.3080.100.2.2Grouppt3080ModeGroupcurrentDVB-T Mode group
1.3.6.1.4.1.193.223.2.3080.100.2.3Grouppt3080InputGroupcurrentInput group
1.3.6.1.4.1.193.223.2.3080.100.2.4Grouppt3080OutputGroupcurrentOutput group
1.3.6.1.4.1.193.223.2.3080.100.2.7Grouppt3080GpsGroupcurrentGPS group
1.3.6.1.4.1.193.223.2.3080.100.2.8Grouppt3080ChannelFilterGroupcurrentChannel Filter group
1.3.6.1.4.1.193.223.2.3080.100.2.10Grouppt3080TSoIPGroupcurrentTSoIP group
1.3.6.1.4.1.193.223.2.3080.100.2.12Grouppt3080MonitorGroupcurrentSignal monitor group
1.3.6.1.4.1.193.223.2.3080.100.2.13Grouppt3080TestGroupcurrentTest Signal group
1.3.6.1.4.1.193.223.2.3080.100.2.14Grouppt3080AlarmGroupcurrentAlarm group
1.3.6.1.4.1.193.223.2.3080.100.2.15Grouppt3080PresetGroupcurrentPreset group
1.3.6.1.4.1.193.223.2.3080.100.2.16Grouppt3080EventlogGroupcurrentEventlog group
1.3.6.1.4.1.193.223.2.3080.100.2.17Grouppt3080CommsGroupcurrentData network communications group
1.3.6.1.4.1.193.223.2.3080.100.2.24Grouppt3080DemodulatorGroupcurrentDemodulator group
1.3.6.1.4.1.193.223.2.3080.100.2.25Grouppt3080PrecorrectorGroupcurrentPrecorrector group
1.3.6.1.4.1.193.223.2.3080.100.2.26Grouppt3080ReceptionGroupcurrentReception group
1.3.6.1.4.1.193.223.2.3080.100.2.27Grouppt3080BackplaneGroupcurrentBackplane group
1.3.6.1.4.1.193.223.2.3080.100.2.30Grouppt3080ASIGroupcurrentASI media group
1.3.6.1.4.1.193.223.2.3080.100.2.64Grouppt3080NotifsGroupcurrentNotification objects group
1.3.6.1.4.1.193.223.2.3080.100.3Compliancept3080AgentcurrentPT2080 DVB-T/H Modulator agent
1.3.6.1.4.1.193.223.2.3080.100.4Nodept3080NotificationsGroups
1.3.6.1.4.1.193.223.2.3080.100.4.3Grouppt3080NotifGroupModulatorAlarmcurrentModulator Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.5Grouppt3080NotifGroupTSPrimaryAlarmcurrentASI TS Primary Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.6Grouppt3080NotifGroupTSSecondaryAlarmcurrentASI TS Secondary Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.7Grouppt3080NotifGroupSFNAlarmcurrentSFN Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.8Grouppt3080NotifGroupRefenceClockAlarmcurrentReference Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.9Grouppt3080NotifGroupRFAlarmcurrentRF Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.10Grouppt3080NotifGroupGNSSAlarmcurrentGNSS Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.12Grouppt3080NotifGroupTSoIPAlarmcurrentTSoIP Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.13Grouppt3080NotifGroupExternalAlarmcurrentExternal Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.14Grouppt3080NotifGroupHWMonitorAlarmcurrentHW Monitor Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.15Grouppt3080NotifGroupCommAlarmcurrentCommunications Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.16Grouppt3080NotifGroupASIAlarmcurrentASI Alarms
1.3.6.1.4.1.193.223.2.3080.100.4.18Grouppt3080NotifGroupInternalAlarmcurrentInternal Alarms
MIB Viewer