Q-IN-Q-MIB
74 objects
The structure of Q-in-Q information for the proprietary enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.57 | IdentityswQinQMIB | The structure of Q-in-Q information for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.12.57.1 | NodeswQinQCtrl | |||
| 1.3.6.1.4.1.171.12.57.1.1 | ScalarswQinQState | read-write | current | This object is used to enable/disable the Q-in-Q status. |
| 1.3.6.1.4.1.171.12.57.1.2 | ScalarswQinQInnerTpid | read-write | current | This object is used to set the system's inner TPID. |
| 1.3.6.1.4.1.171.12.57.2 | NodeswQinQInfo | |||
| 1.3.6.1.4.1.171.12.57.3 | NodeswQinQPortMgmt | |||
| 1.3.6.1.4.1.171.12.57.3.1 | TableswQinQPortTable | not-accessible | current | A table that contains Q-in-Q VLAN mode information about each port. |
| 1.3.6.1.4.1.171.12.57.3.1.1 | RowswQinQPortEntry | not-accessible | current | A list of Q-in-Q VLAN mode information for each port. |
| 1.3.6.1.4.1.171.12.57.3.1.1.1 | ColumnswQinQPortIndex | read-only | current | This object indicates the module's port number. |
| 1.3.6.1.4.1.171.12.57.3.1.1.2 | ColumnswQinQPortRole | read-write | current | This object sets the port role in Q-in-Q mode. It can be UNI port or NNI port. |
| 1.3.6.1.4.1.171.12.57.3.1.1.3 | ColumnswQinQPortMissDrop | read-write | current | This object is used to enable/disable C-VLAN based SP-VLAN assignment miss drop. If missdrop is enabled, the packet that does not match any assignment rule in … |
| 1.3.6.1.4.1.171.12.57.3.1.1.4 | ColumnswQinQPortTpid | read-write | current | Specifies the outer TPID for each port. |
| 1.3.6.1.4.1.171.12.57.3.1.1.5 | ColumnswQinQPortUseInnerPriority | read-write | current | This object specifies whether to use the priority in the C-VLAN tag as the priority in the SP-VLAN tag. |
| 1.3.6.1.4.1.171.12.57.3.1.1.6 | ColumnswQinQPortInnerTagState | read-write | current | Specifies whether to add inner tag for ingress untagged packets. |
| 1.3.6.1.4.1.171.12.57.3.1.1.7 | ColumnswQinQPortInnerTag | read-write | current | If swQinQPortInnerTagState is enabled, this object specifies the inner tag. |
| 1.3.6.1.4.1.171.12.57.3.1.1.8 | ColumnswQinQPortTrustCVID | read-write | current | If swQinQState is enabled, this object specifies whether to use the C-VID of the ingress packet to get S-VID on the UNI port or not. |
| 1.3.6.1.4.1.171.12.57.3.1.1.9 | ColumnswQinQPortVlanTranslation | read-write | current | If swQinQState and swQinQPortTrustCVID are enabled, this object specifies whether to lookup VLAN translation table to get S-VID by the C-VID of the ingress pac… |
| 1.3.6.1.4.1.171.12.57.3.1.1.10 | ColumnswQinQPortInnerTpid | read-write | current | Specifies the inner TPID for each port. |
| 1.3.6.1.4.1.171.12.57.3.2 | TableswQinQPortRuleTable | not-accessible | current | A table that is used to configure a port's Q-in-Q SP-VLAN assignment rule. |
| 1.3.6.1.4.1.171.12.57.3.2.1 | RowswQinQPortRuleEntry | not-accessible | current | A list of Q-in-Q SP-VLAN assignment rules for each port. |
| 1.3.6.1.4.1.171.12.57.3.2.1.1 | ColumnswQinQPortRuleIndex | read-only | current | This object indicates the module's port number. |
| 1.3.6.1.4.1.171.12.57.3.2.1.2 | ColumnswQinQProfileId | read-only | current | This object indicates the Q-in-Q profile ID. |
| 1.3.6.1.4.1.171.12.57.3.2.1.3 | ColumnswQinQPortRuleRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.57.3.3 | TableswVlanTranslateTable | not-accessible | current | A table that contains VLAN translation information. |
| 1.3.6.1.4.1.171.12.57.3.3.1 | RowswVlanTranslateEntry | not-accessible | current | A list of VLAN translation information. |
| 1.3.6.1.4.1.171.12.57.3.3.1.1 | ColumnswVlanTranslatePortIndex | read-only | current | This object indicates the module's port number. |
| 1.3.6.1.4.1.171.12.57.3.3.1.2 | ColumnswVlanTranslateCVID | read-only | current | The customer VLAN identifier in a C-TAG. |
| 1.3.6.1.4.1.171.12.57.3.3.1.3 | ColumnswVlanTranslateSVID | read-create | current | A VLAN identifier conveyed in an S-TAG. |
| 1.3.6.1.4.1.171.12.57.3.3.1.4 | ColumnswVlanTranslateSVIDOperation | read-create | current | The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'r… |
| 1.3.6.1.4.1.171.12.57.3.3.1.5 | ColumnswVlanTranslatePriority | read-create | current | The priority of the S-TAG. -1 is default value. |
| 1.3.6.1.4.1.171.12.57.3.3.1.6 | ColumnswVlanTranslateRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.57.3.4 | TableswDoubleVlanTranslateTable | not-accessible | current | A table that contains Double Tag VLAN translation information. |
| 1.3.6.1.4.1.171.12.57.3.4.1 | RowswDoubleVlanTranslateEntry | not-accessible | current | A list of Double Tag VLAN translation information , only work on NNI port. |
| 1.3.6.1.4.1.171.12.57.3.4.1.1 | ColumnswDoubleVlanTranslatePortIndex | not-accessible | current | This object indicates the module's port number. |
| 1.3.6.1.4.1.171.12.57.3.4.1.2 | ColumnswDoubleVlanTranslateSVID | not-accessible | current | The customer VLAN identifier in a S-TAG. |
| 1.3.6.1.4.1.171.12.57.3.4.1.3 | ColumnswDoubleVlanTranslateCVID | not-accessible | current | The customer VLAN identifier in a C-TAG. |
| 1.3.6.1.4.1.171.12.57.3.4.1.4 | ColumnswDoubleVlanTranslateOperation | read-create | current | The 'replace' action indicates to replace the S-VLAN in the tag by the New S-VLAN. |
| 1.3.6.1.4.1.171.12.57.3.4.1.5 | ColumnswDoubleVlanTranslateNewSVID | read-create | current | The SP-VLAN identifier used to replace. |
| 1.3.6.1.4.1.171.12.57.3.4.1.6 | ColumnswDoubleVlanTranslatePriority | read-create | current | The priority of the S-TAG. -1 is default value. |
| 1.3.6.1.4.1.171.12.57.3.4.1.7 | ColumnswDoubleVlanTranslateRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.57.4 | NodeswQinQMgmt | |||
| 1.3.6.1.4.1.171.12.57.4.1 | TableswQinQProfileTable | not-accessible | current | This table is used to create a Q-in-Q profile to assign SP-VLAN. Multiple rules can be specified for a Q-in-Q profile. |
| 1.3.6.1.4.1.171.12.57.4.1.1 | RowswQinQProfileEntry | not-accessible | current | A list containing Q-in-Q profile information. |
| 1.3.6.1.4.1.171.12.57.4.1.1.1 | ColumnswQinQProfileID | read-only | current | Specifies the Q-in-Q profile ID. |
| 1.3.6.1.4.1.171.12.57.4.1.1.2 | ColumnswQinQProfileRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.57.4.2 | TableswQinQRuleTable | not-accessible | current | This table contains Q-in-Q rule information. These rules will indicate whether to add a tag for the SP-VLAN or to replace the inner C-VLAN in the tag by the SP… |
| 1.3.6.1.4.1.171.12.57.4.2.1 | RowswQinQRuleEntry | not-accessible | current | A list of information about Q-in-Q rules. |
| 1.3.6.1.4.1.171.12.57.4.2.1.1 | ColumnswQinQRuleProfileID | read-only | current | Specifies the profile ID. |
| 1.3.6.1.4.1.171.12.57.4.2.1.2 | ColumnswQinQRuleAccessID | read-only | current | Specifies the ID of the Q-in-Q rule entry related to the swQinQRuleProfileID. |
| 1.3.6.1.4.1.171.12.57.4.2.1.3 | ColumnswQinQRuleClassifySrcMacAddr | read-create | current | Specifies the source MAC address. |
| 1.3.6.1.4.1.171.12.57.4.2.1.4 | ColumnswQinQRuleClassifySrcMacAddrMask | read-create | current | Specifies the source MAC address mask. |
| 1.3.6.1.4.1.171.12.57.4.2.1.5 | ColumnswQinQRuleClassifyDstMacAddr | read-create | current | Specifies the destination MAC address. |
| 1.3.6.1.4.1.171.12.57.4.2.1.6 | ColumnswQinQRuleClassifyDstMacAddrMask | read-create | current | Specifies the destination MAC address mask. |
| 1.3.6.1.4.1.171.12.57.4.2.1.7 | ColumnswQinQRuleSrcIPv4Address | read-create | current | Specifies an IPv4 source address. |
| 1.3.6.1.4.1.171.12.57.4.2.1.8 | ColumnswQinQRuleSrcIPv4AddrMask | read-create | current | Specifies the IPv4 source address mask. |
| 1.3.6.1.4.1.171.12.57.4.2.1.9 | ColumnswQinQRuleDstIPv4Address | read-create | current | Specifies an IPv4 destination address. |
| 1.3.6.1.4.1.171.12.57.4.2.1.10 | ColumnswQinQRuleDstIPv4AddrMask | read-create | current | Specifies the IPv4 destination address mask. |
| 1.3.6.1.4.1.171.12.57.4.2.1.11 | ColumnswQinQRuleInnerVid | read-create | current | Specifies the packet's inner VID range. |
| 1.3.6.1.4.1.171.12.57.4.2.1.12 | ColumnswQinQRuleOuterVid | read-create | current | Specifies the packet's outer VID range. |
| 1.3.6.1.4.1.171.12.57.4.2.1.13 | ColumnswQinQRule8021p | read-create | current | Specifies the packet's 802.1p priority. -1 means the 802.1p priority is not set |
| 1.3.6.1.4.1.171.12.57.4.2.1.14 | ColumnswQinQRuleIpProtocol | read-create | current | Specifies the IP protocol. |
| 1.3.6.1.4.1.171.12.57.4.2.1.15 | ColumnswQinQRuleSourcePort | read-create | current | Specifies the source port number. |
| 1.3.6.1.4.1.171.12.57.4.2.1.16 | ColumnswQinQRuleDestinationPort | read-create | current | Specifies the destination port number. |
| 1.3.6.1.4.1.171.12.57.4.2.1.17 | ColumnswQinQRuleSpvidOperation | read-create | current | The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'r… |
| 1.3.6.1.4.1.171.12.57.4.2.1.18 | ColumnswQinQRuleSpvid | read-create | current | Specifies the SP-VLAN ID to be assigned to the matched packet. |
| 1.3.6.1.4.1.171.12.57.4.2.1.19 | ColumnswQinQPriority | read-create | current | Specifies the priority of the SP-VLAN. -1 is default value. |
| 1.3.6.1.4.1.171.12.57.4.2.1.20 | ColumnswQinQRuleRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.12.57.4.2.1.21 | ColumnswQinQRuleActivePort | read-only | current | Specifies the active port list which the rule takes effect. |
| 1.3.6.1.4.1.171.12.57.4.3 | TableswVlanTranslationCVIDTable | not-accessible | current | A table that contains VLAN translation information applied in enabling port's swQinQPortVlanTranslation, swQinQPortTrustCVID and QinQ. |
| 1.3.6.1.4.1.171.12.57.4.3.1 | RowswVlanTranslationCVIDEntry | not-accessible | current | A list of VLAN translation information applied in enabling a port's swQinQPortVlanTranslation, swQinQPortTrustCVID and QinQ. |
| 1.3.6.1.4.1.171.12.57.4.3.1.1 | ColumnswVlanTranslationCVID | read-only | current | The customer VLAN identifier in a C-TAG. |
| 1.3.6.1.4.1.171.12.57.4.3.1.2 | ColumnswVlanTranslationSVID | read-create | current | A VLAN identifier conveyed in an S-TAG. |
| 1.3.6.1.4.1.171.12.57.4.3.1.3 | ColumnswVlanTranslationSVIDOperation | read-create | current | The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'r… |
| 1.3.6.1.4.1.171.12.57.4.3.1.4 | ColumnswVlanTranslationCVIDRowStatus | read-create | current | This object indicates the status of this entry. |