QLGC-CHFW-MIB
31 objects
The QLogic (firmware) Download MIB module.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| QLOGIC-SMI | -- RFC 3291 qlogicMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE zeroDotZero |
| SNMPv2-TC | AutonomousType DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3873.3.1 | IdentityqlgcChangeFirmwareModule | The QLogic (firmware) Download MIB module. | ||
| 1.3.6.1.4.1.3873.3.1.0 | NodeqlgcChFwNotifications | |||
| 1.3.6.1.4.1.3873.3.1.1 | NodeqlgcChFwObjects | |||
| 1.3.6.1.4.1.3873.3.1.1.1 | NodeqlgcChFwOpTypes | |||
| 1.3.6.1.4.1.3873.3.1.1.1.1 | IdentityqlgcChFwOperDownload | current | This defines a request for the switch to download the firmware as specified in the Download parameters. | |
| 1.3.6.1.4.1.3873.3.1.1.1.1.1 | IdentityqlgcChFwDwldNoErr | current | The requested download has completed with no error. | |
| 1.3.6.1.4.1.3873.3.1.1.1.1.2 | IdentityqlgcChFwDwldHostErr | obsolete | The requested download has completed with a host error. This could be due to an incomplete Download parameter list, an error encountered when trying to communi… | |
| 1.3.6.1.4.1.3873.3.1.1.1.1.3 | IdentityqlgcChFwDwldFileErr | obsolete | The requested download has completed with a file error. This could be due to an incomplete Download parameter list or an invalid character in the filename. | |
| 1.3.6.1.4.1.3873.3.1.1.1.1.4 | IdentityqlgcChFwDwldTftpErr | current | The requested download has completed with a TFTP error. This could be due to an incomplete Download parameter list, an error encountered when trying to communi… | |
| 1.3.6.1.4.1.3873.3.1.1.1.2 | IdentityqlgcChFwOperInstall | current | This defines a request for the switch to install the firmware as specified in the Install parameters. | |
| 1.3.6.1.4.1.3873.3.1.1.1.2.1 | IdentityqlgcChFwInstallNoErr | current | The requested install has completed with no error. | |
| 1.3.6.1.4.1.3873.3.1.1.1.2.2 | IdentityqlgcChFwInstallFileErr | current | The requested install has completed with a file error. This could be due to an incomplete Install parameter list or an error encountered when trying to install… | |
| 1.3.6.1.4.1.3873.3.1.1.1.2.3 | IdentityqlgcChFwInstallFileNoAdminErr | current | The requested install has completed with a permissions error. This could be due to not being able to set Admin status, perhaps because it is in use by another … | |
| 1.3.6.1.4.1.3873.3.1.1.1.3 | IdentityqlgcChFwOperReset | current | This defines a request for the switch to reset itself as specified in the Reset parameters. | |
| 1.3.6.1.4.1.3873.3.1.1.1.3.1 | IdentityqlgcChFwResetNoErr | current | This will presumably never be seen and is only included in the interests of completeness. | |
| 1.3.6.1.4.1.3873.3.1.1.1.3.2 | IdentityqlgcChFwResetErr | current | The requested reset has completed with an error. This could be due to an incomplete Reset parameter list or an error encountered when trying reset the switch. | |
| 1.3.6.1.4.1.3873.3.1.1.1.3.3 | IdentityqlgcChFwResetNoAdminErr | current | The requested reset has completed with an error. This could be due to not being able to set Admin status, perhaps because it is in use by another user. | |
| 1.3.6.1.4.1.3873.3.1.1.2 | NodeqlgcChFwOpControl | |||
| 1.3.6.1.4.1.3873.3.1.1.2.1 | ScalarqlgcChFwOpResult | read-only | current | This object contains an OBJECT IDENTIFIER which identifies the present state of the switch in completing the task requested in qlgcChFwOpRequest. |
| 1.3.6.1.4.1.3873.3.1.1.2.2 | ScalarqlgcChFwOpRequest | read-write | current | The requested action to be initiated through the objects defined in this MIB. |
| 1.3.6.1.4.1.3873.3.1.1.2.3 | ScalarqlgcChFwDwldHostAddrType | read-write | current | The type of Internet Network Address contained in the corresponding instance of the qlgcChFwDwldHostAddr. |
| 1.3.6.1.4.1.3873.3.1.1.2.4 | ScalarqlgcChFwDwldHostAddr | read-write | current | The download host's Internet Network Address. |
| 1.3.6.1.4.1.3873.3.1.1.2.5 | ScalarqlgcChFwDwldHostPort | read-write | current | The download host's Port number. |
| 1.3.6.1.4.1.3873.3.1.1.2.6 | ScalarqlgcChFwDwldPathName | read-write | current | The full path of directories leading to that where the file to be fetched is found. It is assumed that the host is running one of the variations of the Unix op… |
| 1.3.6.1.4.1.3873.3.1.1.2.7 | ScalarqlgcChFwDwldFileName | read-write | current | The name of the file to be downloaded. Do not include any path name information - especially if the qlgcChFwDwldPathName is using its default. |
| 1.3.6.1.4.1.3873.3.1.1.2.8 | ScalarqlgcChFwResetMethod | read-write | current | This object defines the method to use when resetting the switch. |
| 1.3.6.1.4.1.3873.3.1.2 | NodeqlgcChFwConformance | |||
| 1.3.6.1.4.1.3873.3.1.2.1 | NodeqlgcChFwGroups | |||
| 1.3.6.1.4.1.3873.3.1.2.1.1 | GroupqlgcChFwGroup | current | A collection of objects providing information about iSCSI instances. | |
| 1.3.6.1.4.1.3873.3.1.2.2 | NodeqlgcChFwCompliances | |||
| 1.3.6.1.4.1.3873.3.1.2.2.1 | ComplianceqlgcChFwComplianceV1 | current | Initial version of compliance statement based on initial version of MIB. If an implementation can be both a target and an initiator, all groups are mandatory. |