QoS-MIB
70 objects
The structure of QoS for the proprietary enterprise.
Imported Objects
| BRIDGE-MIB | dot1dBasePort |
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.61 | IdentityswQoSMIB | The structure of QoS for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.12.61.1 | NodeswQoSCtrl | |||
| 1.3.6.1.4.1.171.12.61.2 | NodeswQoSInfo | |||
| 1.3.6.1.4.1.171.12.61.3 | NodeswQoSMgmt | |||
| 1.3.6.1.4.1.171.12.61.3.1 | TableswQoSBandwidthControlTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.12.61.3.1.1 | RowswQoSBandwidthControlEntry | not-accessible | current | A list of information contained in the swQoSBandwidthControlTable. |
| 1.3.6.1.4.1.171.12.61.3.1.1.1 | ColumnswQoSBandwidthPort | read-only | current | Indicates the port number. |
| 1.3.6.1.4.1.171.12.61.3.1.1.2 | ColumnswQoSBandwidthRxRate | read-write | current | Indicates Rx Rate of the specified port. Value 0 means no limit. |
| 1.3.6.1.4.1.171.12.61.3.1.1.3 | ColumnswQoSBandwidthTxRate | read-write | current | Indicates the Tx Rate of the specified port. A value of 0 means no limit. |
| 1.3.6.1.4.1.171.12.61.3.1.1.4 | ColumnswQoSBandwidthRadiusRxRate | read-only | current | The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate. |
| 1.3.6.1.4.1.171.12.61.3.1.1.5 | ColumnswQoSBandwidthRadiusTxRate | read-only | current | The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate. |
| 1.3.6.1.4.1.171.12.61.3.2 | TableswQoSSchedulingTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.12.61.3.2.1 | RowswQoSSchedulingEntry | not-accessible | current | A list of information contained in the swQoSSchedulingTable. |
| 1.3.6.1.4.1.171.12.61.3.2.1.1 | ColumnswQoSSchedulingPort | read-only | current | Indicates the port number. |
| 1.3.6.1.4.1.171.12.61.3.2.1.2 | ColumnswQoSSchedulingClassID | read-only | current | Indicates the hardware queue number. |
| 1.3.6.1.4.1.171.12.61.3.2.1.3 | ColumnswQoSSchedulingWeight | read-write | current | Indicates the maximum number of packets the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue … |
| 1.3.6.1.4.1.171.12.61.3.2.1.4 | ColumnswQoSSchedulingMechanism | read-write | current | Indicates the mechanism of QoS scheduling. This object indicates the Qos Scheduling Mechanism mode on a port. |
| 1.3.6.1.4.1.171.12.61.3.2.1.5 | ColumnswQoSSchedulingMechanismEffec | read-only | current | Indicates the effective mechanism of QoS scheduling. If the swQoSSchedulingWeight is configured to be 0, then this object will always display strict (1). |
| 1.3.6.1.4.1.171.12.61.3.3 | TableswQoS8021pDefaultPriorityTable | not-accessible | current | . |
| 1.3.6.1.4.1.171.12.61.3.3.1 | RowswQoS8021pDefaultPriorityEntry | not-accessible | current | A list of information contained in the swQoS8021pDefaultPriorityTable. |
| 1.3.6.1.4.1.171.12.61.3.3.1.1 | ColumnswQoS8021pRadiusPriority | read-only | current | Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. |
| 1.3.6.1.4.1.171.12.61.3.4 | NodeswQosHolPreventionMgmt | |||
| 1.3.6.1.4.1.171.12.61.3.4.6 | ScalarswQoSHolPreventionCtrl | read-write | current | This controls QoS HoL Prevention. |
| 1.3.6.1.4.1.171.12.61.3.5 | NodeswQosInBandMgmt | |||
| 1.3.6.1.4.1.171.12.61.3.5.1 | ScalarswQosInBandMgmtSetDefPriority | read-write | current | Sets the default priority. It is project dependent. |
| 1.3.6.1.4.1.171.12.61.3.5.2 | ScalarswQosInBandMgmtPktPriority | read-write | current | Specifies the priority of packets, the range is 0-7. 7 is the highest priority. |
| 1.3.6.1.4.1.171.12.61.3.6 | NodeswQos8021pColorMapMgmt | |||
| 1.3.6.1.4.1.171.12.61.3.6.1 | TableswQos8021pColorMapCtrlTable | not-accessible | current | A table that contains information about priority map to packet color on each port. |
| 1.3.6.1.4.1.171.12.61.3.6.1.1 | RowswQos8021pColorMapCtrlEntry | not-accessible | current | A list that contains priority map to packet color per port. |
| 1.3.6.1.4.1.171.12.61.3.6.1.1.1 | ColumnswQos8021pColorMapCtrlPortIndex | read-only | current | This object indicates the port number. |
| 1.3.6.1.4.1.171.12.61.3.6.1.1.2 | ColumnswQos8021pColorMapCtrlPriorityIndex | read-only | current | This object indicates the source priority of incoming packets. |
| 1.3.6.1.4.1.171.12.61.3.6.1.1.3 | ColumnswQos8021pColorMapCtrlColor | read-write | current | This object indicates the source priority of incoming packets. |
| 1.3.6.1.4.1.171.12.61.3.6.2 | TableswQos8021pColorMapGlobalCtrlTable | not-accessible | current | A table that contains information about priority map to packet color. |
| 1.3.6.1.4.1.171.12.61.3.6.2.1 | RowswQos8021pColorMapGlobalCtrlEntry | not-accessible | current | A list that contains priority map to packet color. |
| 1.3.6.1.4.1.171.12.61.3.6.2.1.1 | ColumnswQos8021pColorMapGlobalCtrlPriorityIndex | read-only | current | This object indicates the source priority of incoming packets. |
| 1.3.6.1.4.1.171.12.61.3.6.2.1.2 | ColumnswQos8021pColorMapGlobalCtrlColor | read-write | current | This object indicates the source priority of incoming packets. |
| 1.3.6.1.4.1.171.12.61.3.7 | NodeswQosDscpTrustPortMgmt | |||
| 1.3.6.1.4.1.171.12.61.3.7.1 | TableswQosDscpTrustPortCtrlTable | not-accessible | current | A table that contains information about the DSCP trust portlist. |
| 1.3.6.1.4.1.171.12.61.3.7.1.1 | RowswQosDscpTrustPortCtrlEntry | not-accessible | current | A list that contains the DSCP trusted state per port. |
| 1.3.6.1.4.1.171.12.61.3.7.1.1.1 | ColumnswQosDscpTrustPortCtrlPortIndex | read-only | current | This object indicates the port number. |
| 1.3.6.1.4.1.171.12.61.3.7.1.1.2 | ColumnswQosDscpTrustPortCtrlState | read-write | current | This object is used to enable/disable the DSCP trusted state on a selected port. |
| 1.3.6.1.4.1.171.12.61.3.8 | NodeswQosDscpMapMgmt | |||
| 1.3.6.1.4.1.171.12.61.3.8.1 | TableswQosDscpMapCtrlTable | not-accessible | current | A table that contains information about DSCP map to priority and packet color on each port. |
| 1.3.6.1.4.1.171.12.61.3.8.1.1 | RowswQosDscpMapCtrlEntry | not-accessible | current | A list that contains DSCP map information for each port. |
| 1.3.6.1.4.1.171.12.61.3.8.1.1.1 | ColumnswQosDscpMapCtrlPortIndex | read-only | current | This object indicates the port number. |
| 1.3.6.1.4.1.171.12.61.3.8.1.1.2 | ColumnswQosDscpMapCtrlDscpIndex | read-only | current | This object indicates the source DSCP incoming packet. |
| 1.3.6.1.4.1.171.12.61.3.8.1.1.3 | ColumnswQosDscpMapCtrl8021pPriority | read-write | current | This object indicates the 802.1p priority on each port. Default value is: DSCP Priority 0-7 0 8-15 1 16-23 2 24-31 3 32-39 4 40-47 5 48-55 6 56-63 7 |
| 1.3.6.1.4.1.171.12.61.3.8.1.1.4 | ColumnswQosDscpMapCtrlNewDscp | read-write | current | This object indicates the new DSCP map on each port. |
| 1.3.6.1.4.1.171.12.61.3.8.1.1.5 | ColumnswQosDscpMapCtrlColor | read-write | current | This object maps the color for packets on each port. |
| 1.3.6.1.4.1.171.12.61.3.8.2 | TableswQosDscpMapGlobalCtrlTable | not-accessible | current | A table that contains information about DSCP map to priority and packet color. |
| 1.3.6.1.4.1.171.12.61.3.8.2.1 | RowswQosDscpMapGlobalCtrlEntry | not-accessible | current | A list that contains DSCP map information. |
| 1.3.6.1.4.1.171.12.61.3.8.2.1.1 | ColumnswQosDscpMapGlobalCtrlDscpIndex | read-only | current | This object indicates the source DSCP incoming packet. |
| 1.3.6.1.4.1.171.12.61.3.8.2.1.2 | ColumnswQosDscpMapGlobalCtrl8021pPriority | read-write | current | This object indicates the 802.1p priority. Default value is: DSCP Priority 0-7 0 8-15 1 16-23 2 24-31 3 32-39 4 40-47 5 48-55 6 56-63 7 |
| 1.3.6.1.4.1.171.12.61.3.8.2.1.3 | ColumnswQosDscpMapGlobalCtrlNewDscp | read-write | current | This object indicates the new DSCP map. |
| 1.3.6.1.4.1.171.12.61.3.8.2.1.4 | ColumnswQosDscpMapGlobalCtrlColor | read-write | current | This object maps the color for packets. |
| 1.3.6.1.4.1.171.12.61.3.9 | TableswCoSBandwidthControlTable | not-accessible | current | A table that contains information about CoS Bandwidth Control on each port. |
| 1.3.6.1.4.1.171.12.61.3.9.1 | RowswCoSBandwidthControlEntry | not-accessible | current | A list that contains CoS Bandwidth Control information for each port. |
| 1.3.6.1.4.1.171.12.61.3.9.1.1 | ColumnswCoSBandwidthPort | not-accessible | current | This object indicates the port number. |
| 1.3.6.1.4.1.171.12.61.3.9.1.2 | ColumnswCoSBandwidthCoSID | not-accessible | current | Indicates the hardware queue number. |
| 1.3.6.1.4.1.171.12.61.3.9.1.3 | ColumnswCoSBandwidthMinRate | read-write | current | Indicates the Minimum Rate of the specified port. A value of 0 means no limit. |
| 1.3.6.1.4.1.171.12.61.3.9.1.4 | ColumnswCoSBandwidthMaxRate | read-write | current | Indicates the Maximum Rate of the specified port. A value of 0 means no limit. |
| 1.3.6.1.4.1.171.12.61.3.10 | TableswQoSScheduleProfileTable | not-accessible | current | A table that contains information about schedule profile. |
| 1.3.6.1.4.1.171.12.61.3.10.1 | RowswQoSScheduleProfileEntry | not-accessible | current | A list of information contained in the swQoSScheduleProfileTable. |
| 1.3.6.1.4.1.171.12.61.3.10.1.1 | ColumnswQoSScheduleProfileId | not-accessible | current | Indicates the profile identification. |
| 1.3.6.1.4.1.171.12.61.3.10.1.2 | ColumnswQoSScheduleProfileCoSID | not-accessible | current | Indicates the hardware queue number. |
| 1.3.6.1.4.1.171.12.61.3.10.1.3 | ColumnswQoSScheduleProfileMechanism | read-write | current | Indicates the mechanism of the specify hardware queue |
| 1.3.6.1.4.1.171.12.61.3.10.1.4 | ColumnswQoSScheduleProfileWeight | read-write | current | Indicates the maximum number of packets the above specified hardware priority queue will be allowed to transmit before allowing the next lowest priority queue … |
| 1.3.6.1.4.1.171.12.61.3.11 | TableswQoSScheduleGroupTable | not-accessible | current | A table that contains information about schedule group. |
| 1.3.6.1.4.1.171.12.61.3.11.1 | RowswQoSScheduleGroupEntry | not-accessible | current | A list of information contained in the swQoSScheduleGroupTable. |
| 1.3.6.1.4.1.171.12.61.3.11.1.1 | ColumnswQoSScheduleGroupPortMember | read-write | current | Indicates the ports that use the specified profile identification. |