QTECH-AC-MGMT-MIB
374 objects
This module defines ac management mibs.
Imported Objects
| CAPWAP-BASE-MIB MISSING | capwapBaseNtfAuthenMethod capwapBaseNtfChannelDownReason capwapBaseNtfChannelType |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| QTECH-SMI | qtechMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.56 | IdentityqtechAcMgmtMIB | This module defines ac management mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.56.1 | NodeqtechAcMgmtAcMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1 | NodeqtechAcMgmtAc | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.1 | ScalarqtechAcStaLimit | read-write | current | The max station this AC supports. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.2 | ScalarqtechAcWtpLimit | read-write | current | The max wtp this AC supports. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.3 | ScalarqtechAcRMacField | read-write | current | Set AC's R-MAC Field. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.4 | ScalarqtechAcDataDtls | read-write | current | Set AC's DTLS Policy Field. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.5 | ScalarqtechAcEcnSupport | read-write | current | Set AC's ECN Support Field. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6 | TableqtechAcAcIpTable | not-accessible | current | Add or Del the AC's backup ip address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6.1 | RowqtechAcAcIpTableEntry | not-accessible | current | The entry of Ac's backup ip address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6.1.1 | ColumnqtechAcAcIpIndex | read-only | current | AC's Ac name with priority index. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6.1.2 | ColumnqtechAcBackAcIp | read-write | current | Set AC's ip list. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6.1.3 | ColumnqtechAcAcIpRS | read-write | current | Used to add or del a backup ac ip address in the ac. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.7 | ScalarqtechAcMtu | read-write | current | Set AC's MTU. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.8 | ScalarqtechAcAcName | read-write | current | Set AC's Name. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.9 | ScalarqtechAcLocation | read-write | current | Ac's location information. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.10 | ScalarqtechAcResetAp | read-write | current | Delete the ap by assigning the ap name. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.11 | ScalarqtechAcApNum | read-only | current | Ap num attached to this ac. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.12 | TableqtechAc80211aRateTable | not-accessible | current | The Ap attributes. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.12.1 | RowqtechAc80211aRateEntry | not-accessible | current | Get and set the Ap attribtues. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.12.1.1 | ColumnqtechAc80211aRate | not-accessible | current | The global 802.11a rate set in this AC. 802.11a-6, 9, 12, 18, 24, 36, 48, and 54 Mbps. set 1 for 6Mbps, set 2 for 9Mbps, set 3 for 12Mbps,etc... |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.12.1.2 | ColumnqtechAc80211aRateType | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.13 | TableqtechAc80211bRateTable | not-accessible | current | The 802.11b rate attributes. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.13.1 | RowqtechAc80211bRateEntry | not-accessible | current | Get and set the Ap attribtues. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.13.1.1 | ColumnqtechAc80211bRate | not-accessible | current | The global 802.11b rate set in this AC. 802.11b-1, 2, 5.5, 11Mbps. set 1 for 1Mbps, set 2 for 2Mbps, set 3 for 5.5Mbps,etc... |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.13.1.2 | ColumnqtechAc80211bRateType | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.14 | ScalarqtechAcFallback | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.15 | ScalarqtechAcStaNum | read-only | current | The client num in this AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.16 | ScalarqtechAcMacAddr | read-only | current | The AC's mac address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.17 | ScalarqtechAcDescriptor | read-only | current | The AC's descriptor. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.18 | ScalarqtechAcPID | read-only | current | The AC's product id. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.19 | ScalarqtechAcHwId | read-only | current | The AC's Hardware Id. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.20 | ScalarqtechAcSN | read-only | current | The AC's serial number. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.21 | ScalarqtechAcTemp | read-only | current | The AC's temperature. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.22 | ScalarqtechAcAPUpDownCtrl | read-write | current | The AP Up/Down trap control 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.23 | ScalarqtechAcAPJoinFailCtrl | read-write | current | The AP join fail control 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.24 | ScalarqtechAcAPDecryEroReportCtrl | read-write | current | The AP Decry Error Report control 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.25 | ScalarqtechAcApImageUpdtCtrl | read-write | current | The AP Image Update Control 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.26 | ScalarqtechAcApConfigMsgEroCtrl | read-write | current | The AP Config Message Error 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.27 | ScalarqtechAcApRadioOperStatuCtrl | read-write | current | The AP Radio Oper Status 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.28 | ScalarqtechAcApAuthenFailCtrl | read-write | current | The AP Authen Fail trap control 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.29 | ScalarqtechAcApTimestampCtrl | read-write | current | The AP timestamp trap control 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.30 | ScalarqtechAcStaOperCtrl | read-write | current | The Sta operation trap control 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.31 | ScalarqtechAcType | read-only | current | The Ac type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.32 | ScalarqtechAcNeid | read-write | current | The Ac system net id. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.33 | ScalarqtechAcManufacturer | read-only | current | The Ac's Manufacturer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.34 | ScalarqtechAcSwVer | read-only | current | The Ac's software version. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.35 | ScalarqtechAcSwManufacturer | read-only | current | The Ac's software Manufacturer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.36 | ScalarqtechAcStaResourceNotEnough | read-only | current | The sta number which can not attach to this system for not enough resource. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.37 | ScalarqtechAcPppoeClientAct | read-only | current | The active client number in this AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.38 | ScalarqtechAcPppoeClientMax | read-only | current | The client number which this AC support. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.39 | ScalarqtechAcStaActThredhold | read-write | current | The thredhold which the client attach to this AC in one hour. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.40 | ScalarqtechAcStaDisactThredhold | read-write | current | The thredhold which the client leave this AC in one hour. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.41 | ScalarqtechAcStaTotalRoamThredhold | read-only | current | The thredhold which the client's total roaming times. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.42 | ScalarqtechAcStaPerRoamThredhold | read-only | current | The thredhold which the client's roaming times per minite. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.43 | ScalarqtechAcStaOffLineRemainTime | read-write | current | This object presents the time which the off line STA statistic remain in the AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.44 | ScalarqtechAcStaOffLineNumber | read-write | current | This object presents the max number of the off line STA number statistic. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.45 | ScalarqtechAcStaOffLineDelSingle | read-write | current | This object presents the mac address which the off line STA to remove its statistic. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.46 | ScalarqtechAcStaOffLineDelAll | read-write | current | This object is set to clear all of the off line STA's statistic. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.47 | ScalarqtechAcRmOffLineApConfig | read-write | current | This object is set to delete the off line AP's configuration. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48 | TableqtechAcFlowBlGroupTable | not-accessible | current | The flow balance group table |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1 | RowqtechAcFlowBlGroupEntry | not-accessible | current | Get and set the flow balance group attribute. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.1 | ColumnqtechAcFlowBlGroupName | read-only | current | The flow balance group's name. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.2 | ColumnqtechAcFlowBlApName1 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.3 | ColumnqtechAcFlowBlApName2 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.4 | ColumnqtechAcFlowBlApName3 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.5 | ColumnqtechAcFlowBlApName4 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.6 | ColumnqtechAcFlowBlApName5 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.7 | ColumnqtechAcFlowBlApName6 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.8 | ColumnqtechAcFlowBlApName7 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.9 | ColumnqtechAcFlowBlApName8 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.10 | ColumnqtechAcFlowBlApName9 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.11 | ColumnqtechAcFlowBlApName10 | read-write | current | The AP name belong to this flow balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.12 | ColumnqtechAcFlowBlNum | read-write | current | The flow balance group's flow throshold. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.13 | ColumnqtechAcFlowBlRS | read-write | current | Used to add or del or modify the flow balance table. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.14 | ColumnqtechAcFlowBlEnable | read-write | current | The flow balance group's flow enable throshold. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.15 | ColumnqtechAcFlowBlBase | read-write | current | The flow balance group's flow base. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.16 | ColumnqtechAcFlowBlIsEnable | read-write | current | The flow balance group's enable/disable. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49 | TableqtechAcNumBlGroupTable | not-accessible | current | The number balance group table |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1 | RowqtechAcNumBlGroupEntry | not-accessible | current | Get and set the number balance group attribute. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.1 | ColumnqtechAcNumBlGroupName | read-only | current | The number balance group's name. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.2 | ColumnqtechAcNumBlApName1 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.3 | ColumnqtechAcNumBlApName2 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.4 | ColumnqtechAcNumBlApName3 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.5 | ColumnqtechAcNumBlApName4 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.6 | ColumnqtechAcNumBlApName5 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.7 | ColumnqtechAcNumBlApName6 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.8 | ColumnqtechAcNumBlApName7 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.9 | ColumnqtechAcNumBlApName8 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.10 | ColumnqtechAcNumBlApName9 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.11 | ColumnqtechAcNumBlApName10 | read-write | current | The AP name belong to this number balance group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.12 | ColumnqtechAcNumBlNum | read-write | current | The number balance group's number throshold. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.13 | ColumnqtechAcNumBlRS | read-write | current | Used to add or del or modify the number balance table. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.14 | ColumnqtechAcNumBlEnable | read-write | current | The number balance group's number enable throshold. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.15 | ColumnqtechAcNumBlIsEnable | read-write | current | The number balance group's enable/disable. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.50 | ScalarqtechAcInAcRoamNum | read-only | current | The Sta roaming in this AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.51 | ScalarqtechAcBetweenAcRoamInNum | read-only | current | The Sta roaming in timers while roaming between ACs. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.52 | ScalarqtechAcStaOnOverThrodOperCtrl | read-write | current | The Sta on times over thredhold trap control 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.53 | ScalarqtechAcStaOffOverThrodOperCtrl | read-write | current | The Sta off times over thredhold trap control 0 - off 1 - on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.54 | ScalarqtechAcBetweenAcRoamOutNum | read-only | current | The Sta roaming out timers while roaming between ACs. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.55 | ScalarqtechAcCpusageSwitch | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.56 | ScalarqtechAcCpuUsageTrapTimer | read-write | current | This object represents the AP's cpu usage info trap timer, second. Set to all APs. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.57 | ScalarqtechAcStatTrapTimer | read-write | current | This object present the AP's radio statistic trap timer, second. Set to all APs. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.58 | ScalarqtechAcHeartBeat | read-write | current | The heart beat between AC and AP��should not greater than 75s��second. Set 0 to turn off this function. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.59 | ScalarqtechAcTotalApSupNum | read-only | current | This object present the ACs' max num of supported APs. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.60 | ScalarqtechAcTotalStaSupNum | read-only | current | This object present the ACs' max num of supported STAs. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.61 | ScalarqtechAcTotalPppoeSupNum | read-only | current | This object present the ACs' maximum number of pppoe authentication. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.62 | ScalarqtechAcCurTotalApSupNum | read-only | current | This object present the current ACs' max num of supported STAs. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.63 | ScalarqtechAcCurTotalStaSupNum | read-only | current | This object present the current ACs' max num of supported STAs. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.64 | ScalarqtechAcCurTotalPppoeSupNum | read-only | current | This object present the current the ACs' maximum number of pppoe authentication. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.65 | ScalarqtechAcNasId | read-write | current | The NAS ID about this AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.66 | ScalarqtechAcStaLimitLicense | read-only | current | The max station this AC supports by license. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.67 | ScalarqtechAcWtpLimitLicense | read-only | current | The max wtp this AC supports by license. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.68 | ScalarqtechAcStaIpv6Num | read-only | current | The ipv6 client num in this AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.69 | ScalarqtechAcIpv6 | read-only | current | AC's ipv6 address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.70 | ScalarqtechAcIpv6Prefix | read-only | current | AC's ipv6 address prefix. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.71 | ScalarqtechAcIpv6Type | read-only | current | AC's ipv6 address type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.72 | ScalarqtechAcIpv6AddrType | read-only | current | AC's anycast address type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.73 | ScalarqtechAcKickClient | read-write | current | Set the mac and corresponding client will be kicked. Get this object will return last kicked client. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.74 | ScalarqtechAcOpenStaNum | read-only | current | Open client num in this AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.75 | ScalarqtechAcOpenStaAbnormalDownTimes | read-only | current | The times open client is abnormaly offline. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.76 | ScalarqtechAcWepPskStaNum | read-only | current | WEP/PSK client num in this AC. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.1.77 | ScalarqtechAcWepPskStaAbnormalDownTimes | read-only | current | The times WEP/PSK client is abnormaly offline. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.1.2 | NodeqtechAcMgmtAcIf | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.2 | NodeqtechAcMgmtApMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1 | NodeqtechAcMgmtAp | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1 | TableqtechApCfgTable | not-accessible | current | The Ap attributes. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1 | RowqtechApCfgEntry | not-accessible | current | Get and set the Ap attribtues. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.1 | ColumnqtechApMacAddr | read-only | current | The AP's ethernet mac address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.2 | ColumnqtechApApName | read-write | current | Ap's Name. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.3 | ColumnqtechApApgName | read-write | current | Ap group Name. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.4 | ColumnqtechApDiscTimer | read-write | current | Discovery timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.5 | ColumnqtechApEchoReqTimer | read-write | current | Echo Request timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.6 | ColumnqtechApEroReportTimer | read-write | current | Error Report timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.7 | ColumnqtechApStaTimeoutTimer | read-write | current | station idle timeout timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.8 | ColumnqtechApStatisticsTimer | read-write | current | station idle timeout timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.9 | ColumnqtechApFallback | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.10 | ColumnqtechApImageId | read-write | current | The Image version. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.11 | ColumnqtechApIpDhcp | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.12 | ColumnqtechApLocation | read-write | current | Ap Location. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.13 | ColumnqtechApWpsMfp | read-write | current | 0-disable, 1-enable. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.14 | ColumnqtechApLastRebootReason | read-only | current | The AP's last reboot reason. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.15 | ColumnqtechApEthernetIfName | read-only | current | This object represents the name of the Ethernet interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.16 | ColumnqtechApEthernetIfMacAddress | read-only | current | This object represents MAC address of the Ethernet interface in the slot represented by qtechApEthernetIfSlotId. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.17 | ColumnqtechApEthernetIfAdminStatus | read-only | current | This object represents the admin state of the physical Ethernet interface on the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.18 | ColumnqtechApEthernetIfOperStatus | read-only | current | This object represents the operational state of the physical Ethernet interface on the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.19 | ColumnqtechApEthernetIfRxUcastPkts | read-only | current | This object represents total number of unicast packets received on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.20 | ColumnqtechApEthernetIfRxNUcastPkts | read-only | current | This object represents total number of non-unicast or mulitcast packets received on the interface |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.21 | ColumnqtechApEthernetIfTxUcastPkts | read-only | current | This object represents total number of unicast packets transmitted on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.22 | ColumnqtechApEthernetIfTxNUcastPkts | read-only | current | This object represents total number of non-unicast or mulitcast packets transmitted on the interface |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.23 | ColumnqtechApEthernetIfDuplex | read-only | current | This object represents interface's duplex mode |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.24 | ColumnqtechApEthernetIfLinkSpeed | read-only | current | Speed of the interface in units of 1,000,000 bits per second |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.25 | ColumnqtechApEthernetIfPOEPower | read-only | current | This object represents whether this interface supports Power Over Ethernet (POE) none - POE is not supported drawn - This interface supports POE, and power is … |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.26 | ColumnqtechApAdminStatus | read-write | current | This object represents whether this interface supports Power Over Ethernet (POE) enable - enable to admin disable - disable to admin |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.27 | ColumnqtechApEthernetIfRxBoardPkts | read-only | current | This object represents total number of boardcast packets received on the interface |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.28 | ColumnqtechApEthernetIfRxMultiPkts | read-only | current | This object represents total number of mulitcast packets received on the interface |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.29 | ColumnqtechApEthernetIfTxBoardPkts | read-only | current | This object represents total number of boardcast packets transmitted on the interface |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.30 | ColumnqtechApEthernetIfTxMultiPkts | read-only | current | This object represents total number of multicast packets transmitted on the interface |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.31 | ColumnqtechApEthernetIfDropPkts | read-only | current | This object represents total number of packets dropped on the interface |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.32 | ColumnqtechApSn | read-only | current | This object represents SN string of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.33 | ColumnqtechApIp | read-only | current | This object represents ip address of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.34 | ColumnqtechApStaNum | read-only | current | This object represents Sta Num attach to the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.35 | ColumnqtechApToFat | read-write | current | This object represents the ap mode, 0 - fit, 1 - fat. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.36 | ColumnqtechApId | read-only | current | The AP Id |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.37 | ColumnqtechApSwVer | read-only | current | This object represents SN string of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.38 | ColumnqtechApBootVer | read-only | current | This object represents boot version string of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.39 | ColumnqtechApPID | read-only | current | This object represents product id string of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.40 | ColumnqtechApHwVer | read-only | current | This object represents hardware string of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.41 | ColumnqtechApStaLimit | read-write | current | This object represents client num limit of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.42 | ColumnqtechApFactoryDefault | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.43 | ColumnqtechApCpuUsageTrapTimer | read-write | current | This object represents the AP's cpu usage info trap timer, second. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.44 | ColumnqtechApStatTrapTimer | read-write | current | This object present the AP's radio statistic trap timer, second. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.45 | ColumnqtechApLinkOnTimeInterval | read-only | current | This object represents the AP's Link on time interval, seconds. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.46 | ColumnqtechApNetId | read-write | current | This object represents the AP's net unit code. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.47 | ColumnqtechApUptime | read-only | current | This object represents the AP's capwap uptime. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.48 | ColumnqtechApState | read-only | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.49 | ColumnqtechApNasId | read-write | current | The NAS ID about this AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.50 | ColumnqtechApCoverArea | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.51 | ColumnqtechApLinkOnTimeIntervalMs | read-only | current | This object represents the AP's Link on time interval, 0.01seconds. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.52 | ColumnqtechApUptimeMs | read-only | current | This object represents the AP's capwap uptime, 0.01seconds. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.53 | ColumnqtechApHbUptimeMs | read-only | current | This object represents the AP's capwap hotback uptime, 0.01seconds. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.54 | ColumnqtechApIpv6 | read-only | current | This object represents ipv6 address of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.55 | ColumnqtechApIpv6Prefix | read-only | current | This object represents ipv6 address prefix of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.56 | ColumnqtechApIpv6PrefixLen | read-only | current | This object represents ipv6 address prefix length of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.57 | ColumnqtechApIpv6Type | read-only | current | This object represents ipv6 address type of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.58 | ColumnqtechApIpv6Gateway | read-only | current | This object represents ipv6 gateway address of the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.59 | ColumnqtechApIpv6StaNum | read-only | current | This object represents ipv6 Sta Num attach to the AP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2 | TableqtechApCfgRadioTable | not-accessible | current | Set the ap attribute per radio. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1 | RowqtechApCfgRadioEntry | not-accessible | current | The entry of image id table. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.1 | ColumnqtechApCfgRadioId | read-only | current | The radio id, 1~31. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.2 | ColumnqtechApRadioEn | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.3 | ColumnqtechApTxPower | read-write | current | Tx power, 1%. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.4 | ColumnqtechApDtimPeriod | read-write | current | beacon dtim period, second. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.5 | ColumnqtechApBeaconPeriod | read-write | current | beacon period, millisecond. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.6 | ColumnqtechApCountry | read-write | current | Ap country code. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.7 | ColumnqtechApPreaShort | read-write | current | Short preamble support. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.8 | ColumnqtechApRadioBssid | read-only | current | The AP's radio mac address(BSSID). |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.9 | ColumnqtechApTxPowerLevel | read-only | current | The ap's tx power level in the radio. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.10 | ColumnqtechApTxPowerGlobal | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.11 | ColumnqtechApCurChan | read-write | current | The ap's current channel in the radio. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.12 | ColumnqtechApRfGlobal | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.13 | ColumnqtechApRadioType | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.14 | ColumnqtechApRadio11bSup | read-only | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.15 | ColumnqtechApMaxTxPower | read-only | current | Max tx power, mw. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.16 | ColumnqtechApMinTxPower | read-only | current | Min tx power, mw. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.17 | ColumnqtechApCurTxPower | read-write | current | Current tx power, mw. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.18 | ColumnqtechApMaxTxPowerPer | read-only | current | Max tx power percent, %. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.19 | ColumnqtechApMinTxPowerPer | read-only | current | Min tx power percent, %. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.3 | TableqtechApRadioRateCfgTable | not-accessible | current | The rate set of the ap's radio. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.3.1 | RowqtechApRadioRateCfgEntry | not-accessible | current | The attribute of the ap radio rate type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.3.1.1 | ColumnqtechApRadioRate | not-accessible | current | The ap's rate set in the radio. 802.11a-6, 9, 12, 18, 24, 36, 48, and 54 Mbps. set 1 for 6Mbps, set 2 for 9Mbps, set 3 for 12Mbps,etc... 802.11b-1, 2, 5.5, 11M… |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.3.1.2 | ColumnqtechApRadioRateType | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4 | TableqtechApStaticIpCfgTable | not-accessible | current | The rate set of the ap's radio. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1 | RowqtechApStaticIpCfgEntry | not-accessible | current | Config the static ip address of the ap. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1.1 | ColumnqtechApIpAddr | read-write | current | The AP's Static Ip Address |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1.2 | ColumnqtechApIpMask | read-write | current | The AP's Static Ip Address Mask |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1.3 | ColumnqtechApIpGetway | read-write | current | The AP's Static Ip Address Getway |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1.4 | ColumnqtechApStaticIpRS | read-write | current | The AP's Static Ip Address Row status |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5 | TableqtechApOfflineTable | not-accessible | current | The Ap offline time attributes. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5.1 | RowqtechApOfflineEntry | not-accessible | current | Get and set the Ap attribtues. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5.1.1 | ColumnqtechApOfftime | read-only | current | The AP's ethernet mac address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5.1.2 | ColumnqtechApOffApName | read-only | current | Offline Ap's Name. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5.1.3 | ColumnqtechApOffMacAddr | read-only | current | The offline AP's ethernet mac address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.6 | TableqtechApBackupStateTable | not-accessible | current | The Ap backup state. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.6.1 | RowqtechApBackupStateEntry | not-accessible | current | Get the Ap backup state. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.1.6.1.1 | ColumnqtechApBackupState | read-only | current | The AP's backup state. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.2.2 | NodeqtechAcMgmtApIf | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.3 | NodeqtechAcMgmtApgMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1 | NodeqtechAcMgmtApg | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1 | TableqtechApgCfgTable | not-accessible | current | The attribute of the ap group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1 | RowqtechApgCfgEntry | not-accessible | current | The attribute of the ap group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.1 | ColumnqtechApgApgName | read-only | current | Ap group's Name. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.2 | ColumnqtechApgDiscTimer | read-write | current | Discovery timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.3 | ColumnqtechApgEchoReqTimer | read-write | current | Echo Request timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.4 | ColumnqtechApgEroReportTimer | read-write | current | Error Report timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.5 | ColumnqtechApgStaTimeoutTimer | read-write | current | station idle timeout timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.6 | ColumnqtechApgStatisticsTimer | read-write | current | station idle timeout timer. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.7 | ColumnqtechApgFallback | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.8 | ColumnqtechApgImageId | read-write | current | The Ap image version string. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.9 | ColumnqtechApgCreatEn | read-write | current | 0-del, 1-creat. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.2 | TableqtechApgCfgRadioTable | not-accessible | current | The ap group attribute per radio. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.2.1 | RowqtechApgCfgRadioEntry | not-accessible | current | The ap group attribute per radio. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.2.1.1 | ColumnqtechApgEnableRadioId | not-accessible | current | The radio id, 1~31. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.2.1.2 | ColumnqtechApgEnableRadioEn | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3 | TableqtechApgIntfMapTable | not-accessible | current | Set the wlan-interface map table type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1 | RowqtechApgIntfMapEntry | not-accessible | current | The entry of the wlan-interface map table. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.1 | ColumnqtechApgWlanIndex | read-only | current | Wlan Id. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.2 | ColumnqtechApgWlanId | read-write | current | Wlan Id. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.3 | ColumnqtechApgVlanId | read-write | current | Vlan Id. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.4 | ColumnqtechApgRadioId | read-write | current | Radio Id. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.5 | ColumnqtechApgWlanIntfMapRS | read-write | current | Used to add or del a wlan-intf map in the ap group. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.3.2 | NodeqtechAcMgmtApgIf | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.4 | NodeqtechAcMgmtWlanMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1 | NodeqtechAcMgmtWlan | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1 | TableqtechWlanCfgTable | not-accessible | current | The wlan attribute. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1 | RowqtechWlanCfgEntry | not-accessible | current | The wlan attribute. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.1 | ColumnqtechWlanId | read-only | current | Wlan Id. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.2 | ColumnqtechWlanShort | read-write | current | Short Preamble. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.3 | ColumnqtechWlanSpctMgmt | read-write | current | Spectrum_Management. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.4 | ColumnqtechWlanEnQos | read-write | current | enbale qos value. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.5 | ColumnqtechWlanShortSlotTime | read-write | current | short slot time value. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.6 | ColumnqtechWlanEnableApsd | read-write | current | IEEE 802.11 Add WLAN.APSD value. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.7 | ColumnqtechWlanAckType | read-write | current | Ack delayed or immediate value. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.8 | ColumnqtechWlanTunnelType | read-write | current | Tunnel type value. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.9 | ColumnqtechWlanBroadSsid | read-write | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.10 | ColumnqtechWlanRts | read-write | current | rts threshold. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.11 | ColumnqtechWlanShortTry | read-write | current | Short retries. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.12 | ColumnqtechWlanLongTry | read-write | current | Long retries. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.13 | ColumnqtechWlanStaNum | read-only | current | The wireless stationes attach to this wlan. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.14 | ColumnqtechWlanNasId | read-write | current | The NAS ID about this wlan. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2 | TableqtechWlanWlanCreatTable | not-accessible | current | Wlan creat table. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2.1 | RowqtechWlanWlanCreatEntry | not-accessible | current | The entry of Braod Ssid value table. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2.1.1 | ColumnqtechWlanWlanSsid | read-write | current | Wlan Ssid. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2.1.2 | ColumnqtechWlanWlanProfile | read-write | current | Wlan profile. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2.1.3 | ColumnqtechWlanCreateMapRS | read-write | current | Used to add a wlan. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3 | TableqtechWlanChanBandTable | not-accessible | current | Channel band table type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1 | RowqtechWlanChanBandEntry | not-accessible | current | The entry of channel band table. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1.1 | ColumnqtechWlanBandV | not-accessible | current | 1 for unii0, 2 for unii1 .. 7 for unii6. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1.2 | ColumnqtechWlanChanV | read-write | current | fragment threshold. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1.3 | ColumnqtechWlanChanBandEn | read-write | current | 0-disable,1-enable . |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1.4 | ColumnqtechWlanChanBandRS | read-write | current | Used to config a wlan channel band. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4 | TableqtechWlanLimitChanTable | not-accessible | current | Channel band table type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1 | RowqtechWlanLimitChanEntry | not-accessible | current | The entry of channel band table. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1.1 | ColumnqtechWlanLimitChanFirstV | read-write | current | first channel. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1.2 | ColumnqtechWlanLimitChanNumV | read-write | current | Channel num. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1.3 | ColumnqtechWlanLimitChanMaxTxPowerLv | read-write | current | Max Tx Power Level . |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1.4 | ColumnqtechWlanLimitChanRS | read-write | current | Used to config a wlan limit chan. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.4.2 | NodeqtechAcMgmtWlanIf | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.5 | NodeqtechAcMgmtStaMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1 | NodeqtechAcMgmtSta | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1 | TableqtechStaTable | not-accessible | current | qtech AC MGMT station table. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1 | RowqtechStaEntry | not-accessible | current | qtech AC MGMT station entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.1 | ColumnqtechStaMacAddr | read-only | current | The STA's mac address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.2 | ColumnqtechStaApMacAddr | read-only | current | The mac address with the AP which the STA attached. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.3 | ColumnqtechStaVlan | read-only | current | Vlan id the STA belong to. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.4 | ColumnqtechStaWlanId | read-only | current | Wlan id the STA belong to. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.5 | ColumnqtechStaIp | read-only | current | This object represents ip address of the client. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.6 | ColumnqtechStaApIp | read-only | current | This object represents ip address of AP which the client attaches to. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.7 | ColumnqtechStaApRadioId | read-only | current | This object represents radio id of AP which the client attaches to. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.8 | ColumnqtechStaApRadioType | read-only | current | This object represents ip address of AP which the client attaches to. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.9 | ColumnqtechStaAssoType | read-only | current | This object represents sta's associate type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.10 | ColumnqtechStaAuthType | read-only | current | This object represents sta's authentication type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.11 | ColumnqtechStaRoamTimesPerMin | read-only | current | The Sta roaming times in the last minite. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.12 | ColumnqtechStaOnTimesPerHour | read-only | current | The Sta turn on times in the last hour. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.13 | ColumnqtechStaOffTimesPerHour | read-only | current | The Sta turn off times in the last hour. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.14 | ColumnqtechStaIpv6 | read-only | current | The Sta ipv6 address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.15 | ColumnqtechStaAssoAuthMode | read-only | current | The Sta associate authentication mode. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.16 | ColumnqtechStaNetAuthMode | read-only | current | The Sta's authentication mode after associated. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.17 | ColumnqtechStaSsid | read-only | current | This object represents wlan ssid with the sta associated. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.18 | ColumnqtechStaLinkRate | read-only | current | This object represents link rate with the sta associated, unit: kbps. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.19 | ColumnqtechStaCurChan | read-only | current | The Sta's current channel. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.20 | ColumnqtechStaClientType | read-only | current | The sta's type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.21 | ColumnqtechStaRssi | read-only | current | The Sta's current RSSI. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.22 | ColumnqtechStaUserName | read-only | current | This object represents user name with the sta associated. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.23 | ColumnqtechStaTerminalType | read-only | current | This object represents terminal type with the sta associated. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.24 | ColumnqtechStaOnlineTime | read-only | current | This object represents the time when sta is associated. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.25 | ColumnqtechStaUpTimeInterval | read-only | current | This object represents how long sta is online(in seconds). |
| 1.3.6.1.4.1.27514.1.1.10.2.56.5.2 | NodeqtechAcMgmtStaIf | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.6 | NodeqtechAcMgmtNotificationsMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1 | NodeqtechAcMgmtNtfObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.1 | ScalarqtechNotifyApMac | accessible-for-notify | current | Represents the unique identifier of a WTP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.2 | ScalarqtechNotifyStaMac | accessible-for-notify | current | Represents the unique identifier of a STA. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.3 | ScalarqtechNotifyApIp | accessible-for-notify | current | Represents the Ip address of a WTP. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.4 | ScalarqtechNotifyStaIp | accessible-for-notify | current | Represents the Ip of a STA. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.5 | ScalarqtechNotifyStaOperType | accessible-for-notify | current | Represents the STA operation, 1-del,2-add,3-roaming,4-ipupdate,5-ipv6update |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.6 | ScalarqtechNotifyStaApRadioId | accessible-for-notify | current | Represents the radio id which STA attach. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.7 | ScalarqtechNotifyStaApRadioType | accessible-for-notify | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.8 | ScalarqtechNotifyStaVlanId | accessible-for-notify | current | Vlan Id the sta belongs to |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.9 | ScalarqtechNotifyStaWlanId | accessible-for-notify | current | Wlan Id the sta belongs to |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.10 | ScalarqtechNotifyAcMBChangeV | accessible-for-notify | current | 1 - Master to backup, 2 - Backup to master |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.11 | ScalarqtechNotifyStaOperTimes | accessible-for-notify | current | This object present the times when the STA is active, disactive, roaming. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.12 | ScalarqtechNotifyAcPowerIndex | accessible-for-notify | current | This object present the AC's power unit index. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.13 | ScalarqtechNotifyAcPowerStatu | accessible-for-notify | current | This object present the AC's power statu, 0-off, 1-on. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.14 | ScalarqtechNotifyTime | accessible-for-notify | current | This object present the sta operation current time. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.15 | ScalarqtechNotifyOldVer | accessible-for-notify | current | This object present the AP's old version. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.16 | ScalarqtechNotifyNewVer | accessible-for-notify | current | This object present the AP's new version. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.17 | ScalarqtechNotifyVerUpdtReason | accessible-for-notify | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.18 | ScalarqtechNotifyStaIpv6 | accessible-for-notify | current | Sta ipv6 address. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.19 | ScalarqtechNotifyStaAssoAuthMode | accessible-for-notify | current | The Sta associate authentication mode. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.20 | ScalarqtechNotifyStaNetAuthMode | accessible-for-notify | current | The Sta's authentication mode after associated. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.21 | ScalarqtechNotifyStaSsid | accessible-for-notify | current | The wlan ssid with the sta associated. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.22 | ScalarqtechNotifyStaLinkRate | accessible-for-notify | current | The link rate with the sta associated, unit: 1kbps. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.23 | ScalarqtechNotifyStaCurChan | accessible-for-notify | current | The Sta current use channel after associated. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.24 | ScalarqtechNotifyStaClientType | accessible-for-notify | current | The Sta's type. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.25 | ScalarqtechNotifyStaRssi | accessible-for-notify | current | The Sta's RSSI. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.26 | ScalarqtechNotifyStaReason | accessible-for-notify | current | The Sta's down reason. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.27 | ScalarqtechNotifyStaTimestamp | accessible-for-notify | current | Seconds since device bootup when this trap is sent. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.28 | ScalarqtechNotifyStaOnlineTimeval | accessible-for-notify | current | Sta's total online time in seconds. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.29 | ScalarqtechNotifyStaIpv4Upflow | accessible-for-notify | current | Sta's total IPv4 upflow in kbps. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.1.30 | ScalarqtechNotifyStaIpv4Downflow | accessible-for-notify | current | Sta's total IPv4 downflow in kbps. |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2 | NodeqtechAcMgmtNotifications | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.1 | NotificationqtechNotifyApTimeStampFail | current | This notification is sent by the AC when an AP sync the time failed. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.2 | NotificationqtechNotifyStaOper | current | This notification is sent by the AC when a sta enter or quit or ip update. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.3 | NotificationqtechNotifyAcMBChange | current | This notification is sent by the AC change from smaster to backup or backup to master. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.4 | NotificationqtechNotifyApSwUpdtFail | current | This notification is sent by the AC when update the AP software failed. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.5 | NotificationqtechNotifyStaActOverThredhold | current | This notification is sent by the AC when a sta active times over thredhold. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.6 | NotificationqtechNotifyStaDisactOverThredhold | current | This notification is sent by the AC when a sta's disactive times over thredhold. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.7 | NotificationqtechNotifyStaRoamTotal | current | This notification is sent by the AC when a sta's total roaming times over thredhold . | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.8 | NotificationqtechNotifyStaRoamPerMin | current | This notification is sent by the AC when a sta's roaming times per minite over thredhold . | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.9 | NotificationqtechNotifyAcPowerStatus | current | This notification is sent by the AC when the AC's power unit status changed. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.10 | NotificationqtechNotify86PowerOffAlarm | current | This notification is sent by the 86 power off. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.11 | NotificationqtechNotify86PowerOffAlarmClear | current | This notification is sent by the 86 power on. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.12 | NotificationqtechNotifyApSwUpdtSuccess | current | This notification is sent by the AC when update the AP software success. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.13 | NotificationqtechNotifyApUp | current | This notification is sent by the AC when a CAPWAP channel established. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.14 | NotificationqtechNotifyApDown | current | This notification is sent by the AC when CAPWAP channel becomes down. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.15 | NotificationqtechNotifyApSwUpdtFailApMac | current | This notification is sent by the AC when update the AP software failed. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.16 | NotificationqtechNotifyApTimeStampFailApMac | current | This notification is sent by the AC when an AP sync the time failed. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.6.2.17 | NotificationqtechNotifyStaOperAlternate | current | This notification is sent by the AC when a sta is up, down or roaming. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.7 | NodeqtechAcMgmtAcMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.7.1 | NodeqtechAcMgmtAcMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.7.1.1 | ComplianceqtechAcMgmtAcMIBCompliance | current | The compliance statement for entities which implement the Qtech Ac Manager Ac | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.7.2 | NodeqtechAcMgmtAcMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.56.7.2.1 | GroupqtechAcMgmtAcMIBGroup | current | A collection of objects providing ac manager (echo) ability to a Qtech agent. | |
| 1.3.6.1.4.1.27514.1.1.10.2.56.7.2.2 | GroupqtechAcMgmtAcTrapGroup | current | A collection of traps providing ac manager (echo) ability to a Qtech agent. |