QTECH-ALT-MIB
2041 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | ifIndex |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 experimental Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2751 | Nodeqtech | |||
| 1.3.6.1.4.1.2751.100 | Nodeos | |||
| 1.3.6.1.4.1.2751.100.1 | NodepriSystem | |||
| 1.3.6.1.4.1.2751.100.1.1 | ScalarsysResetUnit | read-write | current | setfactory(2) warmReset(3) noReset(1) default the status is 1 |
| 1.3.6.1.4.1.2751.100.1.2 | ScalarsysHardwareVersion | read-only | current | The version information of switch hardware |
| 1.3.6.1.4.1.2751.100.1.3 | ScalarsysSoftwareVersion | read-only | current | The version information of switch software |
| 1.3.6.1.4.1.2751.100.1.4 | ScalarsysStackFlag | read-only | current | If it is the status of stacking |
| 1.3.6.1.4.1.2751.100.1.5 | ScalarsysCPUMac | read-only | current | The MAC Address of the switch's CPU |
| 1.3.6.1.4.1.2751.100.1.6 | ScalarsysWriteConfig | read-write | current | write(1)save the current configuration |
| 1.3.6.1.4.1.2751.100.1.7 | TablesysPowerStateTable | not-accessible | current | the power supply status is only used for chassis switch |
| 1.3.6.1.4.1.2751.100.1.7.1 | RowsysPowerStateEntry | not-accessible | current | power supply status |
| 1.3.6.1.4.1.2751.100.1.7.1.1 | ColumnsysPowerSlotIndex | not-accessible | current | Module model No. |
| 1.3.6.1.4.1.2751.100.1.7.1.2 | ColumnsysPowerState | read-only | current | if the power supply insert |
| 1.3.6.1.4.1.2751.100.1.7.1.3 | ColumnsysPowerValue | read-only | current | Power Value |
| 1.3.6.1.4.1.2751.100.1.7.1.4 | ColumnsysPowerType | read-only | current | Power Type |
| 1.3.6.1.4.1.2751.100.1.7.1.5 | ColumnsysPowerStatus | read-only | current | Power Status |
| 1.3.6.1.4.1.2751.100.1.8 | TablesysSlotTable | not-accessible | current | machine information,it is only used by chassis. |
| 1.3.6.1.4.1.2751.100.1.8.1 | RowsysSlotEntry | not-accessible | current | Switch information |
| 1.3.6.1.4.1.2751.100.1.8.1.1 | ColumnsysSlotIndex | not-accessible | current | Module Model No. |
| 1.3.6.1.4.1.2751.100.1.8.1.2 | ColumnsysCPUType | read-only | current | CPU type |
| 1.3.6.1.4.1.2751.100.1.8.1.3 | ColumnsysCPUFiveSecondIdle | read-only | current | Last 5 second CPU IDLE |
| 1.3.6.1.4.1.2751.100.1.8.1.4 | ColumnsysCPUThirtySecondIdle | read-only | current | Last 30 second CPU IDLE |
| 1.3.6.1.4.1.2751.100.1.8.1.5 | ColumnsysCPUFiveMinuteIdle | read-only | current | Last 5 minute CPU IDLE |
| 1.3.6.1.4.1.2751.100.1.8.1.6 | ColumnsysCPUIdle | read-only | current | From running CPU IDLE |
| 1.3.6.1.4.1.2751.100.1.8.1.7 | ColumnsysMemorySize | read-only | current | memory size |
| 1.3.6.1.4.1.2751.100.1.8.1.8 | ColumnsysMemoryBusy | read-only | current | memory usage rent |
| 1.3.6.1.4.1.2751.100.1.8.1.9 | ColumnsysFlashSize | read-only | current | The flash capacity of this slot. |
| 1.3.6.1.4.1.2751.100.1.8.1.10 | ColumnsysTemperature | read-only | current | The Temperature of this slot.80 is 80centigrade |
| 1.3.6.1.4.1.2751.100.1.8.1.11 | ColumnsysCpuUsage | read-only | current | The CPU usage of this slot. |
| 1.3.6.1.4.1.2751.100.1.9 | TableswitchInfoTable | not-accessible | current | Table of descriptive and status information about switches in this system. |
| 1.3.6.1.4.1.2751.100.1.9.1 | RowswitchInfoEntry | not-accessible | current | An entry in the table, containing information about a single switch in this system. |
| 1.3.6.1.4.1.2751.100.1.9.1.1 | ColumnswSlotIndex | read-only | current | This object identifies the slot within the switch for which this entry contains information. While for the chassis device, the value is real switch slot number. |
| 1.3.6.1.4.1.2751.100.1.9.1.2 | ColumnswUnitIndex | read-only | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.2751.100.1.9.1.3 | ColumnswModuleType | read-only | current | Type of expansion module in this switch slot. |
| 1.3.6.1.4.1.2751.100.1.10 | NodeswitchFileCopy | |||
| 1.3.6.1.4.1.2751.100.1.10.1 | ScalarfileUserName | read-write | current | ftp user name |
| 1.3.6.1.4.1.2751.100.1.10.2 | ScalarfileUserPassword | read-write | current | ftp user password |
| 1.3.6.1.4.1.2751.100.1.10.3 | ScalarfileIPaddress | read-write | current | ftp or tftp server ip address |
| 1.3.6.1.4.1.2751.100.1.10.4 | ScalarsourceFileCopy | read-write | current | Source file name or Copy from current system configuration . |
| 1.3.6.1.4.1.2751.100.1.10.5 | ScalardestinationFileCopy | read-write | current | Destination file name or Copy to startup configuration. |
| 1.3.6.1.4.1.2751.100.1.10.6 | ScalarfileCopyMode | read-write | current | ascii(0): ASCII file mode; binary(1): Binary file mode. |
| 1.3.6.1.4.1.2751.100.1.10.7 | ScalarfileCopyUseMode | read-write | current | ftp(1): ftp server or client; tftp(2): tftp server or client. |
| 1.3.6.1.4.1.2751.100.1.10.8 | ScalarfileCopy | read-write | current | File copy configurate. |
| 1.3.6.1.4.1.2751.100.1.10.9 | ScalarfileCopyResult | read-only | current | The result of file copy:error(0):copy file failure;ok(1):copy file success; uploading(2):in process of upload file;downloading(3):in process of download file; … |
| 1.3.6.1.4.1.2751.100.1.11 | NodeswitchInfo | |||
| 1.3.6.1.4.1.2751.100.1.11.1 | ScalarswitchCPUType | read-only | current | The CPU type of switch |
| 1.3.6.1.4.1.2751.100.1.11.2 | ScalarswitchCPUFiveSecondIdle | read-only | current | Last 5 second CPU IDLE |
| 1.3.6.1.4.1.2751.100.1.11.3 | ScalarswitchCPUThirtySecondIdle | read-only | current | Last 30 second CPU IDLE |
| 1.3.6.1.4.1.2751.100.1.11.4 | ScalarswitchCPUFiveMinuteIdle | read-only | current | Last 5 minute CPU IDLE |
| 1.3.6.1.4.1.2751.100.1.11.5 | ScalarswitchCPUIdle | read-only | current | From running CPU IDLE |
| 1.3.6.1.4.1.2751.100.1.11.6 | ScalarswitchMemorySize | read-only | current | memory size |
| 1.3.6.1.4.1.2751.100.1.11.7 | ScalarswitchMemoryBusy | read-only | current | memory usage rent |
| 1.3.6.1.4.1.2751.100.1.11.8 | ScalarswitchFlashSize | read-only | current | The flash capacity of switch. |
| 1.3.6.1.4.1.2751.100.1.11.9 | ScalarswitchTemperature | read-only | current | The Temperature of switch.80 is 80centigrade |
| 1.3.6.1.4.1.2751.100.1.11.10 | ScalarswitchCpuUsage | read-only | current | The CPU usage of switch. |
| 1.3.6.1.4.1.2751.100.1.11.11 | ScalarswitchMemoryUsage | read-only | current | The memory usage of switch. |
| 1.3.6.1.4.1.2751.100.1.12 | TablesysFanTable | not-accessible | current | the state of fan. |
| 1.3.6.1.4.1.2751.100.1.12.1 | RowsysFanEntry | not-accessible | current | fan supply status |
| 1.3.6.1.4.1.2751.100.1.12.1.1 | ColumnsysFanIndex | not-accessible | current | system fan entry index |
| 1.3.6.1.4.1.2751.100.1.12.1.2 | ColumnsysFanInserted | read-only | current | Whether the slot fan is installed or not. |
| 1.3.6.1.4.1.2751.100.1.12.1.3 | ColumnsysFanStatus | read-only | current | Whether the slot fan is normal or abnormal. |
| 1.3.6.1.4.1.2751.100.1.12.1.4 | ColumnsysFanSpeed | read-write | current | Status of Fan. Status: Low(1), Medium-Low(2), Medium(3), Medium-High(4), High(5), none(0) is readonly |
| 1.3.6.1.4.1.2751.100.1.13 | ScalarswitchBootImgPrimary | read-write | current | Set or get filename of boot img for first time,and the length of filename is between 1 and 128. |
| 1.3.6.1.4.1.2751.100.1.14 | ScalarswitchBootImgSecondary | read-write | current | Set or get filename of boot img for second time,and the length of filename is between 1 and 128. |
| 1.3.6.1.4.1.2751.100.1.15 | ScalarswitchBootStartUpCfg | read-write | current | Set or get filename of boot startup config ,and the length of filename is between 1 and 128. |
| 1.3.6.1.4.1.2751.100.1.16 | ScalarshowSwitchStartUpStatus | read-only | current | this object identifies start up status of switch and AM of chassis.1(idle) means hasn't wrote cfg since boot, 2(success) means wrote cfg successfully; 3(fail) … |
| 1.3.6.1.4.1.2751.100.1.17 | TablesysSlotBootInfoTable | not-accessible | current | A list of boot information.it is only used by chassis. |
| 1.3.6.1.4.1.2751.100.1.17.1 | RowsysSlotBootInfoEntry | not-accessible | current | Entry for boot information. |
| 1.3.6.1.4.1.2751.100.1.17.1.1 | ColumnsysBootInfoIndex | read-only | current | slot NO. |
| 1.3.6.1.4.1.2751.100.1.17.1.2 | ColumnsysBootImgPrimary | read-write | current | Set or get filename of boot img for first time,and the length of filename is between 1 and 128. |
| 1.3.6.1.4.1.2751.100.1.17.1.3 | ColumnsysBootImgSecondary | read-write | current | Set or get filename of boot img for backup,and the length of filename is between 1 and 128. |
| 1.3.6.1.4.1.2751.100.1.17.1.4 | ColumnsysBootStartupCfg | read-write | current | Set or get filename of boot startup config ,and the length of filename is between 1 and 128. |
| 1.3.6.1.4.1.2751.100.1.18 | NodesysSetBootPassword | |||
| 1.3.6.1.4.1.2751.100.1.18.1 | ScalaroldPassword | read-write | current | If there is a old password, you should enter the old password, then you can set the new password or delete the password. The length of the password is between … |
| 1.3.6.1.4.1.2751.100.1.18.2 | ScalarnewPassword | read-write | current | Enter the new password you want to set, and the length of the password is between 3 and 32. |
| 1.3.6.1.4.1.2751.100.1.18.3 | ScalarconfirmPassword | read-write | current | Enter the new password again to confirm the new password, the password entries must match. |
| 1.3.6.1.4.1.2751.100.1.18.4 | ScalardeletePassword | read-write | current | If you want to delete the password, enter '1'; if you don't want delete it, you can enter '0' or do nothing. |
| 1.3.6.1.4.1.2751.100.1.18.5 | ScalarsysSetBootPwStatus | read-write | current | If you enter '1', excute the operation you set. Firstly, judge the type of deletePassword, if it is '1', delete the password, and return ok; if the type is '0'… |
| 1.3.6.1.4.1.2751.100.1.22 | NodesysAddUser | |||
| 1.3.6.1.4.1.2751.100.1.22.1 | ScalarsysUserName | read-write | current | set the username. |
| 1.3.6.1.4.1.2751.100.1.22.2 | ScalarsysUserPassword | read-write | current | set the password. |
| 1.3.6.1.4.1.2751.100.1.22.3 | ScalarsysUserPasswordOption | read-write | current | set a uncrypted(0) or crypted(7) password,default uncrypted(0). |
| 1.3.6.1.4.1.2751.100.1.22.4 | ScalarsysUserNamePrivilege | read-write | current | set username privilege,default 15. |
| 1.3.6.1.4.1.2751.100.1.22.5 | ScalarsysAddUserStatus | read-write | current | enable(1) user name and password. |
| 1.3.6.1.4.1.2751.100.1.23 | TablepriPowerTable | not-accessible | current | Table of power information about switches in this switch. |
| 1.3.6.1.4.1.2751.100.1.23.1 | RowpriPowerEntry | not-accessible | current | An entry in the table, containing information about power in this switch. |
| 1.3.6.1.4.1.2751.100.1.23.1.1 | ColumnpriPowerIndex | read-only | current | get power number(power1;power2). |
| 1.3.6.1.4.1.2751.100.1.23.1.2 | ColumnpriPowerPresent | read-only | current | get power's status of present(1:present; 0: not present). |
| 1.3.6.1.4.1.2751.100.1.23.1.3 | ColumnpriPowerSupply | read-only | current | get power's supply status(1:up; 0:shutdown). |
| 1.3.6.1.4.1.2751.100.1.24 | ScalarloadConfigurationFile | write-only | current | Set the filename of configuration to be load ,and the length of filename is between 1 and 128. |
| 1.3.6.1.4.1.2751.100.1.30 | NodevsfInfo | |||
| 1.3.6.1.4.1.2751.100.1.30.1 | ScalarvsfCount | read-only | current | vsf member count. |
| 1.3.6.1.4.1.2751.100.1.30.2 | TablevsfModuleTable | not-accessible | current | Table of descriptive and status information about vsf in this system. |
| 1.3.6.1.4.1.2751.100.1.30.2.1 | RowvsfModuleEntry | not-accessible | current | An entry in the table, containing information about vsf in this system. |
| 1.3.6.1.4.1.2751.100.1.30.2.1.1 | ColumnvsfSlotIndex | read-only | current | the value is real vsf slot number. |
| 1.3.6.1.4.1.2751.100.1.30.2.1.2 | ColumnvsfMemberIndex | read-only | current | vsf member index. |
| 1.3.6.1.4.1.2751.100.1.30.2.1.3 | ColumnvsfModuleType | read-only | current | Type of expansion module in this vsf slot. |
| 1.3.6.1.4.1.2751.100.1.100 | ScalardeviceTypeID | read-only | current | the hardware type ID of the physical entity. |
| 1.3.6.1.4.1.2751.100.2 | NodepriSpanningTree | |||
| 1.3.6.1.4.1.2751.100.2.1 | ScalarspanGlobalEnable | read-write | current | Enable or disable the Spanning Tree algorithm in the switch. |
| 1.3.6.1.4.1.2751.100.2.2 | NodemstpMgt | |||
| 1.3.6.1.4.1.2751.100.2.2.1 | NodemstpSystemGroup | |||
| 1.3.6.1.4.1.2751.100.2.2.1.1 | ScalarmstpEnable | read-create | current | Enable or disable the Spanning Tree algorithm in the switch. |
| 1.3.6.1.4.1.2751.100.2.2.1.2 | ScalarmstpTCFlush | read-create | current | configure global style of TC FLUSH |
| 1.3.6.1.4.1.2751.100.2.2.1.3 | ScalarmstpForwardTime | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.2751.100.2.2.1.4 | ScalarmstpHelloTime | read-only | current | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.2751.100.2.2.1.5 | ScalarmstpMaxage | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.2751.100.2.2.1.6 | ScalarmstpMaxhop | read-create | current | setting global Maxhop of mstp |
| 1.3.6.1.4.1.2751.100.2.2.1.7 | ScalarmstpMode | read-create | current | setting global mode of mstp,stp or rstp |
| 1.3.6.1.4.1.2751.100.2.2.1.8 | ScalarmstpName | read-create | current | setting the name of mst |
| 1.3.6.1.4.1.2751.100.2.2.1.9 | ScalarmstpRevisionLevel | read-create | current | setting the global revision level of mstp |
| 1.3.6.1.4.1.2751.100.2.2.1.10 | ScalarmstpBridgeForwardDelay | read-create | current | setting global Forwardtime of mstp |
| 1.3.6.1.4.1.2751.100.2.2.1.11 | ScalarmstpBridgeHelloTime | read-create | current | setting global HelloTime of mstp |
| 1.3.6.1.4.1.2751.100.2.2.1.12 | ScalarmstpBridgeMaxage | read-create | current | setting global Maxage of mstp |
| 1.3.6.1.4.1.2751.100.2.2.2 | TablemstpInstanceTable | not-accessible | current | correlative information list with instance |
| 1.3.6.1.4.1.2751.100.2.2.2.1 | RowmstpInstanceEntry | not-accessible | current | The index of this table is instance ID |
| 1.3.6.1.4.1.2751.100.2.2.2.1.1 | ColumnmstpInstanceID | not-accessible | current | instance ID |
| 1.3.6.1.4.1.2751.100.2.2.2.1.2 | ColumnmstpInstanceVlans | read-create | current | the map of vlans to instance.The input format is consonant with cli. |
| 1.3.6.1.4.1.2751.100.2.2.2.1.3 | ColumnmstpInstanceSwitchPriority | read-create | current | the priority of the router in the special instance. |
| 1.3.6.1.4.1.2751.100.2.2.2.1.4 | ColumnmstpInstanceRegionRootID | read-only | current | the region root ID in the special instance. |
| 1.3.6.1.4.1.2751.100.2.2.2.1.5 | ColumnmstpInstanceIntRootPathCost | read-only | current | the path cost from self bridge to Region Root. |
| 1.3.6.1.4.1.2751.100.2.2.2.1.6 | ColumnmstpInstanceRootPortID | read-only | current | the root port ID in the special instance. |
| 1.3.6.1.4.1.2751.100.2.2.3 | TablemstpInstancePortTable | not-accessible | current | interrelated parameter list of instance and port |
| 1.3.6.1.4.1.2751.100.2.2.3.1 | RowmstpInstancePortEntry | not-accessible | current | The index of this table is instance ID and port index |
| 1.3.6.1.4.1.2751.100.2.2.3.1.1 | ColumnmstpInstancePortInstanceID | not-accessible | current | instance ID |
| 1.3.6.1.4.1.2751.100.2.2.3.1.2 | ColumnmstpInstancePortPortIndex | not-accessible | current | port index |
| 1.3.6.1.4.1.2751.100.2.2.3.1.3 | ColumnmstpInstancePortCost | read-create | current | port cost of port under the special instance |
| 1.3.6.1.4.1.2751.100.2.2.3.1.4 | ColumnmstpInstancePortPriority | read-create | current | port priority of port under the special instance |
| 1.3.6.1.4.1.2751.100.2.2.3.1.5 | ColumnmstpInstancePortRootGuard | read-create | current | rootguard enable/disable on the current instance |
| 1.3.6.1.4.1.2751.100.2.2.3.1.6 | ColumnmstpInstancePortID | read-only | current | ID of port which receive a BPDU |
| 1.3.6.1.4.1.2751.100.2.2.3.1.7 | ColumnmstpInstancePortExtRootPathCost | read-only | current | the path cost from self bridge to Root bridge |
| 1.3.6.1.4.1.2751.100.2.2.3.1.8 | ColumnmstpInstancePortIntRootPathCost | read-only | current | the path cost from self bridge to Region Root |
| 1.3.6.1.4.1.2751.100.2.2.3.1.9 | ColumnmstpInstancePortState | read-only | current | the port state in the instance |
| 1.3.6.1.4.1.2751.100.2.2.3.1.10 | ColumnmstpInstancePortRole | read-only | current | the port role in the instance |
| 1.3.6.1.4.1.2751.100.2.2.3.1.11 | ColumnmstpInstancePortDesignatedBridgeID | read-only | current | the designated bridge ID |
| 1.3.6.1.4.1.2751.100.2.2.3.1.12 | ColumnmstpInstancePortDesignatedPortID | read-only | current | the designated port ID |
| 1.3.6.1.4.1.2751.100.2.2.4 | TablemstpPortInfoTable | not-accessible | current | mstp information list of port |
| 1.3.6.1.4.1.2751.100.2.2.4.1 | RowmstpPortInfoEntry | not-accessible | current | The index of this table is port index |
| 1.3.6.1.4.1.2751.100.2.2.4.1.1 | ColumnmstpPortInfoPortIndex | not-accessible | current | port index |
| 1.3.6.1.4.1.2751.100.2.2.4.1.2 | ColumnmstpPortInfoEnable | read-create | current | enable/disable mstp on the port. |
| 1.3.6.1.4.1.2751.100.2.2.4.1.3 | ColumnmstpPortLinkType | read-create | current | the p2p link type of the port |
| 1.3.6.1.4.1.2751.100.2.2.4.1.4 | ColumnmstpPortMcheck | read-create | current | trigger/untrigger |
| 1.3.6.1.4.1.2751.100.2.2.4.1.5 | ColumnmstpPortPortFast | read-create | current | default:the port mode is portfast mode bpdufilter:the port mode is portfast mode with bpdufilter bpduguard:the port mode is portfast mode with bpduguard noport… |
| 1.3.6.1.4.1.2751.100.2.2.4.1.6 | ColumnmstpPortFormat | read-create | current | which mode can be setted up port of message format function |
| 1.3.6.1.4.1.2751.100.2.2.4.1.7 | ColumnmstpPortDigestSnp | read-create | current | Whether the port use peer's authentication key |
| 1.3.6.1.4.1.2751.100.2.2.4.1.8 | ColumnmstpPortTCFlush | read-create | current | when topology is changed, how to flush the mac |
| 1.3.6.1.4.1.2751.100.3 | NodepriPorts | |||
| 1.3.6.1.4.1.2751.100.3.1 | ScalarportCount | read-only | current | The total number of ports in the system. |
| 1.3.6.1.4.1.2751.100.3.2 | TableportTable | not-accessible | current | A list of port entries. |
| 1.3.6.1.4.1.2751.100.3.2.1 | RowpriPortEntry | not-accessible | current | A port entry containing port information, status, and control. |
| 1.3.6.1.4.1.2751.100.3.2.1.1 | ColumnportIndex | read-only | current | port No. |
| 1.3.6.1.4.1.2751.100.3.2.1.2 | ColumnportName | read-only | current | Name of the port. exp:financial. |
| 1.3.6.1.4.1.2751.100.3.2.1.3 | ColumnswitchNum | read-only | current | This value is denoting the number of swith in which this port resides. For the non-stackable device,the value is always 1. While for the stackable device, the … |
| 1.3.6.1.4.1.2751.100.3.2.1.4 | ColumnslotNum | read-only | current | This value is denoting the number of slot. For the static slot,the value is 1,while for the extended slot the value is real extended slot number. |
| 1.3.6.1.4.1.2751.100.3.2.1.5 | ColumnportType | read-only | current | Type of expansion module in this port. |
| 1.3.6.1.4.1.2751.100.3.2.1.6 | ColumnflowControlStatus | read-write | current | The flow-control status of the port. Its functionality is exactly same as 'flow control' or 'no flow control' commands in console mode. |
| 1.3.6.1.4.1.2751.100.3.2.1.7 | ColumnbandwidthControlStatus | read-only | current | The bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwid… |
| 1.3.6.1.4.1.2751.100.3.2.1.8 | ColumnmaxBandwidth | read-only | current | The max bandwidth of the port. |
| 1.3.6.1.4.1.2751.100.3.2.1.9 | ColumnreceiveBandwidth | read-write | current | The recevice bandwidth of the port. Its unit is kbs. The command 'bandwidth control 50 both' in console mode equals setting both receiveBandwidth and transmitB… |
| 1.3.6.1.4.1.2751.100.3.2.1.10 | ColumntransmitBandwidth | read-write | current | The transmit bandwidth of the port. Its unit is kbs. Set 0 is no bandwidth. |
| 1.3.6.1.4.1.2751.100.3.2.1.12 | Columnshutdown | read-write | current | Close or open to specify the port. |
| 1.3.6.1.4.1.2751.100.3.2.1.13 | Columnloopback | read-write | current | Open or close to specify the wreath of the port back to test the function. |
| 1.3.6.1.4.1.2751.100.3.2.1.14 | ColumnspeedDuplex | read-write | current | The speed and duplex status of the port. |
| 1.3.6.1.4.1.2751.100.3.2.1.15 | ColumnportMode | read-write | current | port mode: 1 is access,2 is trunk,3 is hybrid |
| 1.3.6.1.4.1.2751.100.3.2.1.16 | Columnpvid | read-write | current | port of native vlan No. |
| 1.3.6.1.4.1.2751.100.3.2.1.17 | ColumnindicatesType | read-only | current | Indicates the port type of the configuration of the switch. |
| 1.3.6.1.4.1.2751.100.3.2.1.18 | ColumnvctAction | read-write | current | This object indicates the VCT action of the port,only the value 1 is permitted when SET this entry though you can GET 1(processing) and 0(succeed); The specifi… |
| 1.3.6.1.4.1.2751.100.3.2.1.19 | ColumnvctLastStatus | read-only | current | Indicates the last VCT status of the port. |
| 1.3.6.1.4.1.2751.100.3.2.1.20 | ColumnportTrunkAllowedvlan | read-write | current | trunk port allowed vlan list string |
| 1.3.6.1.4.1.2751.100.3.2.1.21 | ColumnportHybridTaggedAllowedvlan | read-write | current | hybrid port tagged allowed vlan list string |
| 1.3.6.1.4.1.2751.100.3.2.1.22 | ColumnportHybridUntaggedAllowedvlan | read-write | current | hybrid port untagged allowed vlan list string |
| 1.3.6.1.4.1.2751.100.3.2.1.23 | ColumnportBandWidthUsage | read-only | current | The percentage of the port's bandwidth usage |
| 1.3.6.1.4.1.2751.100.3.2.1.24 | ColumnlastFiveMinInPktsPerSec | read-only | current | last five minutes input packets/Sec. |
| 1.3.6.1.4.1.2751.100.3.2.1.25 | ColumnlastFiveMinOutPktsPerSec | read-only | current | last five minutes output packets/Sec. |
| 1.3.6.1.4.1.2751.100.3.2.1.26 | ColumnlastFiveSecInPktsPerSec | read-only | current | last five seconds input packets/Sec. |
| 1.3.6.1.4.1.2751.100.3.2.1.27 | ColumnlastFiveSecOutPktsPerSec | read-only | current | last five seconds output packets/Sec. |
| 1.3.6.1.4.1.2751.100.3.2.1.28 | ColumntimeSinceLastChange | read-only | current | The time (in hundredths of a second) since the last port state changed. |
| 1.3.6.1.4.1.2751.100.3.3 | TablestormControlTable | not-accessible | current | storm-contol table |
| 1.3.6.1.4.1.2751.100.3.3.1 | RowstormControlEntry | not-accessible | current | storm-control entry |
| 1.3.6.1.4.1.2751.100.3.3.1.1 | ColumnstormControlIndex | read-only | current | port index |
| 1.3.6.1.4.1.2751.100.3.3.1.2 | ColumnstormControlType | read-only | current | broadcast(broadcast rate suppression),multicast(multicast rate suppression), unicast(unicast rate suppression),dlf(Destination Lookup Failure rate suppression)… |
| 1.3.6.1.4.1.2751.100.3.3.1.3 | ColumnstormControlRate | read-write | current | the suppress rate.the value range at <1-1488095> or <1-1000000> on different devices. |
| 1.3.6.1.4.1.2751.100.3.3.1.4 | ColumnstormControlStatus | read-write | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry |
| 1.3.6.1.4.1.2751.100.3.4 | NodeloopbackDetection | |||
| 1.3.6.1.4.1.2751.100.3.4.1 | ScalarloopbackDetecCtrlRecovery | read-write | current | This value is the state recovery time.When this time comes, port back to the normal state.But when the value is 0, does not restore state. |
| 1.3.6.1.4.1.2751.100.3.4.2 | NodeloopbackDetecIntervalTime | |||
| 1.3.6.1.4.1.2751.100.3.4.2.1 | ScalarlpbackDetecExistInterval | read-write | current | This detection time interval is present when the loop exists, in seconds, the range of 5 to 300. The default value is 5. |
| 1.3.6.1.4.1.2751.100.3.4.2.2 | ScalarlpbackDetecNoExistInterval | read-write | current | This detection time interval is present when the loop does not exist, in seconds, the range from 1 to 30,The default value is 3. |
| 1.3.6.1.4.1.2751.100.3.4.3 | TableloopbackDetecCtrlTable | not-accessible | current | A table containing current configuration information for the function of loopback detection control. |
| 1.3.6.1.4.1.2751.100.3.4.3.1 | RowloopbackDetecCtrlEntry | not-accessible | current | An entry in the loopback detection control table. |
| 1.3.6.1.4.1.2751.100.3.4.3.1.1 | ColumnlpbackDetecCtrlIndex | not-accessible | current | An unique value for each port. |
| 1.3.6.1.4.1.2751.100.3.4.3.1.2 | ColumnlpbackDetecCtrlMode | read-write | current | Indicates the control type of the configuration of the loopback detection. The default value is 0. When the value is set to 0,the loopback detection control fu… |
| 1.3.6.1.4.1.2751.100.3.4.4 | TableloopbackDetecSpecVlanTable | not-accessible | current | Setting the loopback detection function for the specified vlan of the port. |
| 1.3.6.1.4.1.2751.100.3.4.4.1 | RowloopbackDetecSpecVlanEntry | not-accessible | current | An entry in the loopbackDetecSpecVlanTable. |
| 1.3.6.1.4.1.2751.100.3.4.4.1.1 | ColumnlpbackDetecVlanPortIndex | not-accessible | current | An unique value for each port. |
| 1.3.6.1.4.1.2751.100.3.4.4.1.2 | ColumnlpbackDetecVlanList | read-write | current | The value is a vlan list that you will set.Please pay attention to the list of writing,eg:1;3;5-20 . |
| 1.3.6.1.4.1.2751.100.3.4.4.1.3 | ColumnlpbackDetecVlanListSetFlag | read-write | current | When lpbackDetecVlanListSetFlag is 1,open the specified VLAN loopback detection function.When lpbackDetecVlanListSetFlag is 0,close the specified VLAN loopback… |
| 1.3.6.1.4.1.2751.100.3.4.5 | TableloopbackDetecShowTable | not-accessible | current | Show the config and state of loopback detection for the specified port. |
| 1.3.6.1.4.1.2751.100.3.4.5.1 | RowloopbackDetecShowEntry | not-accessible | current | An entry in the loopbackDetecShowTable. |
| 1.3.6.1.4.1.2751.100.3.4.5.1.1 | ColumnlpbackDetecShowPortIndex | not-accessible | current | An unique value for each port. |
| 1.3.6.1.4.1.2751.100.3.4.5.1.2 | ColumnlpbackDetecShowInformation | read-only | current | The value display the configuration and state of loopback detection for the specified port. |
| 1.3.6.1.4.1.2751.100.3.5 | TablestormControlPortTable | not-accessible | current | storm-contol port table |
| 1.3.6.1.4.1.2751.100.3.5.1 | RowstormControlPortEntry | not-accessible | current | storm-control entry |
| 1.3.6.1.4.1.2751.100.3.5.1.1 | ColumnstormControlPortIndex | read-only | current | port index |
| 1.3.6.1.4.1.2751.100.3.5.1.2 | ColumnstormControlSuppressType | read-only | current | broadcast(broadcast rate suppression),multicast(multicast rate suppression), unicast(unicast rate suppression)) |
| 1.3.6.1.4.1.2751.100.3.5.1.3 | ColumnstormControlSuppressRateUnit | read-write | current | set kbps as measure or set pps as measure |
| 1.3.6.1.4.1.2751.100.3.5.1.4 | ColumnstormControlSuppressRateValue | read-write | current | if the suppressrate unit is pps,the value range at <1-1488095> ,or if the suppressrate unit is bps,the value range at <1-1000000>, it depends on stormControlSu… |
| 1.3.6.1.4.1.2751.100.3.5.1.5 | ColumnstormControlSuppressStatus | read-write | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry |
| 1.3.6.1.4.1.2751.100.3.6 | TableflowCounterTable | not-accessible | current | control port and vlan interface flow table |
| 1.3.6.1.4.1.2751.100.3.6.1 | RowflowCounterEntry | not-accessible | current | control port and vlan interface flow entry |
| 1.3.6.1.4.1.2751.100.3.6.1.1 | ColumnflowPortIndex | read-only | current | Port Index |
| 1.3.6.1.4.1.2751.100.3.6.1.2 | ColumnflowVlanID | read-only | current | Vlan ID |
| 1.3.6.1.4.1.2751.100.3.6.1.3 | ColumnflowCounterInOctets | read-only | current | The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. |
| 1.3.6.1.4.1.2751.100.3.6.1.4 | ColumnflowCounterInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Thi… |
| 1.3.6.1.4.1.2751.100.3.6.1.5 | ColumnflowCounterInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.2751.100.3.6.1.6 | ColumnflowCounterInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-… |
| 1.3.6.1.4.1.2751.100.3.6.1.7 | ColumnflowCounterOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. |
| 1.3.6.1.4.1.2751.100.3.6.1.8 | ColumnflowCounterOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.2751.100.3.6.1.9 | ColumnflowCounterOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.2751.100.3.6.1.10 | ColumnflowCounterOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.2751.100.3.6.1.11 | ColumnclearFlowCounter | read-write | current | Clear flow counter. |
| 1.3.6.1.4.1.2751.100.3.7 | TablesumFlowCounterTable | not-accessible | current | control port and vlan interface flow table |
| 1.3.6.1.4.1.2751.100.3.7.1 | RowsumFlowCounterEntry | not-accessible | current | control port and vlan interface flow entry |
| 1.3.6.1.4.1.2751.100.3.7.1.1 | ColumnsumFlowVlanID | read-only | current | Vlan ID |
| 1.3.6.1.4.1.2751.100.3.7.1.2 | ColumnsumFlowCounterInOctets | read-only | current | The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. |
| 1.3.6.1.4.1.2751.100.3.7.1.3 | ColumnsumFlowCounterInPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Thi… |
| 1.3.6.1.4.1.2751.100.3.7.1.4 | ColumnsumFlowCounterOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. |
| 1.3.6.1.4.1.2751.100.3.7.1.5 | ColumnsumFlowCounterOutPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.2751.100.3.7.1.6 | ColumnclearSumFlowCounter | read-write | current | Clear flow counter. |
| 1.3.6.1.4.1.2751.100.3.10 | TableportUtilTable | not-accessible | current | A list of port util entries. |
| 1.3.6.1.4.1.2751.100.3.10.1 | RowportUtilEntry | not-accessible | current | A port util entry containing wan port in util,wan port out util, bit error rate and packet lost rate. |
| 1.3.6.1.4.1.2751.100.3.10.1.1 | ColumnportUtilIndex | read-only | current | port No. |
| 1.3.6.1.4.1.2751.100.3.10.1.2 | ColumnwanIfInUtil | read-only | current | WAN port inflows utilization. |
| 1.3.6.1.4.1.2751.100.3.10.1.3 | ColumnwanIfOutUtil | read-only | current | WAN port outflows utilization. |
| 1.3.6.1.4.1.2751.100.3.10.1.4 | ColumnifBer | read-only | current | port error rate. |
| 1.3.6.1.4.1.2751.100.3.10.1.5 | ColumnifPaketLostRate | read-only | current | port packet lost rate. |
| 1.3.6.1.4.1.2751.100.3.11 | NodeportLEDShutoffTable | |||
| 1.3.6.1.4.1.2751.100.3.11.1 | NodeportLEDTimerange | |||
| 1.3.6.1.4.1.2751.100.3.11.1.1 | TableportLEDTimeRangeMapTable | not-accessible | current | timeRange Map Table |
| 1.3.6.1.4.1.2751.100.3.11.1.1.1 | RowportLEDTimeRangeMapEntry | not-accessible | current | timeRange Map Entry |
| 1.3.6.1.4.1.2751.100.3.11.1.1.1.1 | ColumnportLEDTimeRangeMapIndex | read-only | current | TimeRange Map index,the range of it is 1-(2^32-1). |
| 1.3.6.1.4.1.2751.100.3.11.1.1.1.2 | ColumnportLEDTimeRangeMapName | read-write | current | TimeRange Map name |
| 1.3.6.1.4.1.2751.100.3.11.1.1.1.3 | ColumnportLEDTimeRangeMapStatus | read-write | current | TimeRange Map status |
| 1.3.6.1.4.1.2751.100.3.11.1.2 | TableportLEDTimeRangeTable | not-accessible | current | timeRange Table |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1 | RowportLEDTimeRangeEntry | not-accessible | current | timeRange Entry |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.1 | ColumnportLEDTimeRangeIndex | read-only | current | TimeRange index,the allowed range is 1 to 1000. |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.2 | ColumnportLEDTimeRangeSubIndex | read-only | current | TimeRange sub index,the allowed range is 1 to 1000. |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.3 | ColumnportLEDTimeRangeType | read-write | current | TimeRange type |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.4 | ColumnportLEDTimeRangeStartWeek | read-write | current | configurate the start week,for example: f8 means monday+tuesday+wednesday+thurday+friday, the lowest bit is not used,so fe is the biggest. |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.5 | ColumnportLEDTimeRangeStartDate | read-write | current | configurate the start Date,for example YYYY.MM.DD . |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.6 | ColumnportLEDTimeRangeStartTime | read-write | current | configurate the start clock,for example HH:MM:SS. |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.7 | ColumnportLEDTimeRangeEndWeek | read-write | current | configurate the end week,for example: f8 means monday+tuesday+wednesday+thurday+friday, the lowest bit is not used,so fe is the biggest. |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.8 | ColumnportLEDTimeRangeEndDate | read-write | current | configurate the end date,for example YYYY.MM.DD. |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.9 | ColumnportLEDTimeRangeEndTime | read-write | current | configurate the end clock,for example HH:MM:SS. |
| 1.3.6.1.4.1.2751.100.3.11.1.2.1.10 | ColumnportLEDTimeRangeStatus | read-write | current | status of timeRangeMapTable |
| 1.3.6.1.4.1.2751.100.3.11.2 | NodeportLEDConfig | |||
| 1.3.6.1.4.1.2751.100.3.11.2.1 | ScalarportLEDTimeRangeName | read-write | current | the timer range of port LED shut-off config |
| 1.3.6.1.4.1.2751.100.3.11.2.2 | ScalarportLEDState | read-only | current | enable or disable LED shut-off on all ports. |
| 1.3.6.1.4.1.2751.100.3.11.2.3 | ScalarportLEDTimeRangeDelete | write-only | current | the timer range of port LED shut-off delete |
| 1.3.6.1.4.1.2751.100.4 | NodepriIpConfig | |||
| 1.3.6.1.4.1.2751.100.4.1 | ScalarnetDefaultGateway | read-write | current | The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.2751.100.4.2 | ScalaripHttpState | read-write | current | Web server on-off. |
| 1.3.6.1.4.1.2751.100.4.3 | TableiPAddrTable | not-accessible | current | A table of iPAddrEntry. |
| 1.3.6.1.4.1.2751.100.4.3.1 | RowiPAddrEntry | not-accessible | current | A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is … |
| 1.3.6.1.4.1.2751.100.4.3.1.1 | ColumniPAddrVid | not-accessible | current | The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. |
| 1.3.6.1.4.1.2751.100.4.3.1.2 | ColumniPAddrIPAddress | not-accessible | current | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the… |
| 1.3.6.1.4.1.2751.100.4.3.1.3 | ColumniPAddrSubnetMask | read-create | current | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when t… |
| 1.3.6.1.4.1.2751.100.4.3.1.4 | ColumniPAddrPrimaryInterface | read-create | current | Whether this is a primary interface. |
| 1.3.6.1.4.1.2751.100.4.3.1.5 | ColumniPAddrStatus | read-create | current | Now state. |
| 1.3.6.1.4.1.2751.100.4.4 | TableinterfaceTable | not-accessible | current | A table of interfaceEntry. |
| 1.3.6.1.4.1.2751.100.4.4.1 | RowinterfaceEntry | not-accessible | current | A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is … |
| 1.3.6.1.4.1.2751.100.4.4.1.1 | Columnintfacetype | not-accessible | current | The Type of interface. Now support(1)vintf and (2)loopback. |
| 1.3.6.1.4.1.2751.100.4.4.1.2 | ColumnintfaceID | not-accessible | current | The Number of interface. exp:intfacetype(1),interfaceID(2) means interface vlan 2. if intfacetype(2) interfaceID(4) means interface loopback4. if intfacetype(3… |
| 1.3.6.1.4.1.2751.100.4.4.1.3 | ColumnintfaceIndex | read-only | current | The Index of interface. |
| 1.3.6.1.4.1.2751.100.4.4.1.5 | ColumnintfaceStatus | read-create | current | Now state. |
| 1.3.6.1.4.1.2751.100.5 | NodepriVlanConfig | |||
| 1.3.6.1.4.1.2751.100.5.1 | TablevlanInfoTable | not-accessible | current | A table containing current configuration information for each VLAN currently configured into the device by (local or network) management. |
| 1.3.6.1.4.1.2751.100.5.1.1 | RowvlanInfoEntry | not-accessible | current | Static information for a VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.2751.100.5.1.1.1 | ColumnvlanID | not-accessible | current | This value is vlan's ID. |
| 1.3.6.1.4.1.2751.100.5.1.1.2 | ColumnvlanName | read-create | current | which may be used to identify the VLAN. |
| 1.3.6.1.4.1.2751.100.5.1.1.3 | ColumnvlanPortNumber | read-only | current | The sum of vlan's ports. |
| 1.3.6.1.4.1.2751.100.5.1.1.4 | ColumnvlanRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2751.100.5.2 | TablemvlanInfoTable | not-accessible | current | A table containing current configuration information for Multicast VLAN . |
| 1.3.6.1.4.1.2751.100.5.2.1 | RowmvlanInfoEntry | not-accessible | current | Static information for Multicast VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.2751.100.5.2.1.1 | ColumnmvlanID | not-accessible | current | This value is mvlan's ID. |
| 1.3.6.1.4.1.2751.100.5.2.1.2 | ColumnmvlanStatus | read-write | current | the status of mVLAN:enable(1) to active a mvlanID;disable(0) is to destroy a mvlanID. |
| 1.3.6.1.4.1.2751.100.5.2.1.3 | ColumnmvlanAssoVlanList | read-write | current | configure vlans association with multicast Vlan,such as'3-4'or '2,5,6',set or unset by Configuring mvlanAssoVlanStatus; geting vlans which associating with mul… |
| 1.3.6.1.4.1.2751.100.5.2.1.4 | ColumnmvlanAssoVlanStatus | read-write | current | the status of mvlanAssoVlan:enable(1) to enable multicast Vlan association with Vlan; disable(0) is to disable multicast Vlan association with Vlan. |
| 1.3.6.1.4.1.2751.100.5.2.1.5 | ColumnmvlanMode | read-write | current | configure mode: when no configration,Default: 0. |
| 1.3.6.1.4.1.2751.100.5.3 | TablemvlanPortInfoTable | not-accessible | current | A table containing current configuration information for each Multicast VLAN . |
| 1.3.6.1.4.1.2751.100.5.3.1 | RowmvlanPortInfoEntry | not-accessible | current | Static information for Multicast VLAN configured into the device by (local or network) management. |
| 1.3.6.1.4.1.2751.100.5.3.1.1 | ColumnmvlanVId | not-accessible | current | This value is mvlan's ID. |
| 1.3.6.1.4.1.2751.100.5.3.1.2 | ColumnmvlanPortIndex | not-accessible | current | Mvlan's port index. |
| 1.3.6.1.4.1.2751.100.5.3.1.3 | ColumnmvlanAssoPortTagid | read-write | current | tagId of portIndex association with multicast Vlan,Default:0.if port needn't Tagid, set portIndex association with mvlanVId only. |
| 1.3.6.1.4.1.2751.100.5.3.1.4 | ColumnmvlanPortStatus | read-write | current | the status of mvlanPortStatus:enable(1) to enable port association with multicast Vlan; disable(0) is to disable port association with multicast Vlan. |
| 1.3.6.1.4.1.2751.100.5.4 | TablevlanFlowCounterTable | not-accessible | current | A table containing flow counters according to vlanid,in/out direction, containing unicast,multicast and broadcast flow. |
| 1.3.6.1.4.1.2751.100.5.4.1 | RowvlanFlowCounterEntry | not-accessible | current | Flow counters on vlan for in/out ports. |
| 1.3.6.1.4.1.2751.100.5.4.1.1 | ColumnvlanFCVlanID | not-accessible | current | This value is vlan's ID. |
| 1.3.6.1.4.1.2751.100.5.4.1.2 | ColumnvlanInOctets | read-only | current | The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. |
| 1.3.6.1.4.1.2751.100.5.4.1.3 | ColumnvlanInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Thi… |
| 1.3.6.1.4.1.2751.100.5.4.1.4 | ColumnvlanInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.2751.100.5.4.1.5 | ColumnvlanInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-… |
| 1.3.6.1.4.1.2751.100.5.4.1.6 | ColumnvlanOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. |
| 1.3.6.1.4.1.2751.100.5.4.1.7 | ColumnvlanOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.2751.100.5.4.1.8 | ColumnvlanOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.2751.100.5.4.1.9 | ColumnvlanOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.2751.100.5.4.1.10 | ColumnclearVlanFlowCounter | read-write | current | Clear flow counter. |
| 1.3.6.1.4.1.2751.100.6 | NodepriJumblyStacking | |||
| 1.3.6.1.4.1.2751.100.6.1 | ScalarsysStackUnitNumber | read-only | current | the number of the stacked units. |
| 1.3.6.1.4.1.2751.100.6.2 | TablejumblyStackingInfoTable | not-accessible | current | Table of descriptive and status information about jumbly stacking in this system. |
| 1.3.6.1.4.1.2751.100.6.2.1 | RowjumblyStackingInfoEntry | not-accessible | current | An entry in the table, containing information about stacking switch in this system. |
| 1.3.6.1.4.1.2751.100.6.2.1.1 | ColumnstackingUnitIndex | read-only | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.2751.100.6.2.1.2 | ColumnswHardwareVersion | read-only | current | The text string denoting the version of the hardware. |
| 1.3.6.1.4.1.2751.100.6.2.1.3 | ColumnswSoftwareVersion | read-only | current | The text string denoting the version of the software. |
| 1.3.6.1.4.1.2751.100.6.2.1.4 | ColumnswCPUMac | read-only | current | the Mac address of the machine. |
| 1.3.6.1.4.1.2751.100.6.2.1.5 | ColumnswType | read-only | current | Type of this switch. |
| 1.3.6.1.4.1.2751.100.7 | NodepriUamSecurityPortMib | |||
| 1.3.6.1.4.1.2751.100.7.1 | TableportSecurityTable | not-accessible | current | The table of port security |
| 1.3.6.1.4.1.2751.100.7.1.1 | RowportSecurityEntry | not-accessible | current | An entry in the port security table. |
| 1.3.6.1.4.1.2751.100.7.1.1.1 | ColumnpsPortIndex | not-accessible | current | A unique value for each port |
| 1.3.6.1.4.1.2751.100.7.1.1.2 | ColumnpsPortSecurity | read-write | current | enable or disable mac bind on this port |
| 1.3.6.1.4.1.2751.100.7.1.1.3 | ColumnpsSecuritytSaticMacAdd | read-write | current | bind Security mac address on this port |
| 1.3.6.1.4.1.2751.100.7.1.1.4 | ColumnpsSecurityStaticMacDel | read-write | current | delete Security mac address on this port |
| 1.3.6.1.4.1.2751.100.7.1.1.5 | ColumnpsSecurityPortLock | read-write | current | lock or unlock this port |
| 1.3.6.1.4.1.2751.100.7.1.1.6 | ColumnpsSecurityPortMax | read-write | current | Maximum secure addrs on this port |
| 1.3.6.1.4.1.2751.100.7.1.1.7 | ColumnpsSecurityPortConvertmac | read-write | current | convert dynamic mac to security mac |
| 1.3.6.1.4.1.2751.100.7.1.1.8 | ColumnpsSecurityPortLocktimer | read-write | current | lock timer on this port |
| 1.3.6.1.4.1.2751.100.7.2 | TablesecurityMacPortTable | not-accessible | current | Table of descriptive and status information about security port |
| 1.3.6.1.4.1.2751.100.7.2.1 | RowsecurityMacPortEntry | not-accessible | current | An entry in the security mac port table. |
| 1.3.6.1.4.1.2751.100.7.2.1.1 | ColumnsecPortIndex | read-only | current | A unique value for each port |
| 1.3.6.1.4.1.2751.100.7.2.1.2 | ColumnsecMacAdress | read-only | current | Mac adress bind on this port |
| 1.3.6.1.4.1.2751.100.7.2.1.3 | ColumnsecVid | read-only | current | vlan id of this port(pvid) |
| 1.3.6.1.4.1.2751.100.8 | NodepriIgmpSnoopingMib | |||
| 1.3.6.1.4.1.2751.100.8.1 | ScalarpriIgmpSnoopingGlobalEnable | read-write | current | Enable or disable the IgmpSnooping algorithm in the switch. |
| 1.3.6.1.4.1.2751.100.8.2 | TablepriIgmpSnoopingVlanTable | not-accessible | current | IopgmpSnoing configuration in vlan. |
| 1.3.6.1.4.1.2751.100.8.2.1 | RowpriIgmpSnoopingEntry | not-accessible | current | IgmpSnooping confition in vlan. |
| 1.3.6.1.4.1.2751.100.8.2.1.1 | ColumnpriIgmpSnoopingvlanID | not-accessible | current | This value is vlan's ID. |
| 1.3.6.1.4.1.2751.100.8.2.1.2 | ColumnpriIgmpSnoopingvlanEnable | read-write | current | Enable or disable the IgmpSnooping in the switch.Default:0 |
| 1.3.6.1.4.1.2751.100.8.2.1.3 | ColumnpriIgmpSnoopingleave | read-write | current | Enable or disable the immediate leave config.Default:0 |
| 1.3.6.1.4.1.2751.100.8.2.1.4 | ColumnpriIgmpSnoopingL2gen | read-write | current | Enable or disable the l2-general-querier config.Default:0 |
| 1.3.6.1.4.1.2751.100.8.2.1.5 | ColumnpriIgmpSnoopingGroupNum | read-write | current | set the maximum IGMP group the port can join |
| 1.3.6.1.4.1.2751.100.8.2.1.6 | ColumnpriIgmpSnoopingSourceNum | read-write | current | set the maximum source number |
| 1.3.6.1.4.1.2751.100.8.2.1.7 | ColumnpriIgmpSnoopingPort | read-only | current | Get static mrouter port of vlan. ethernet: Name of Ethernet port ifname: Name of interface port-channel: Port aggregation. |
| 1.3.6.1.4.1.2751.100.8.2.1.8 | ColumnpriIgmpSnoopingPortTime | read-write | current | Configure this survive time of mrouter port.Default: 255s |
| 1.3.6.1.4.1.2751.100.8.2.1.9 | ColumnpriIgmpSnoopingQueryInterval | read-write | current | Configure this query interval. Default: 125s |
| 1.3.6.1.4.1.2751.100.8.2.1.10 | ColumnpriIgmpSnoopingQueryMrsp | read-write | current | Configure the maximum query response period. Default: 10s |
| 1.3.6.1.4.1.2751.100.8.2.1.11 | ColumnpriIgmpSnoopingQueryRobustness | read-write | current | Configure the query robustness.Default: 2 |
| 1.3.6.1.4.1.2751.100.8.2.1.12 | ColumnpriIgmpSnoopingSuppression | read-write | current | Configure the suppression query time.Default: 255s |
| 1.3.6.1.4.1.2751.100.8.3 | TablepriIgmpSnoopingBindTable | not-accessible | current | IgmpSnoing bind configuration. |
| 1.3.6.1.4.1.2751.100.8.3.1 | RowpriIgmpSnoopingBindEntry | not-accessible | current | IgmpSnooping bind configuration. |
| 1.3.6.1.4.1.2751.100.8.3.1.1 | ColumnpriIgmpSnoopingVlanID | not-accessible | current | This value is vlan's ID. |
| 1.3.6.1.4.1.2751.100.8.3.1.2 | ColumnpriIgmpSnoopingGroupAddress | not-accessible | current | This value is group's ip address. |
| 1.3.6.1.4.1.2751.100.8.3.1.3 | ColumnpriIgmpSnoopingPortBitmap | read-only | current | Port's bitmap. |
| 1.3.6.1.4.1.2751.100.8.4 | TablepriIgmpSnoopingLimitPortTable | not-accessible | current | IopgmpSnoing limits configuration per port in vlan. |
| 1.3.6.1.4.1.2751.100.8.4.1 | RowpriIgmpSnoopingLimitPortEntry | not-accessible | current | IgmpSnooping limits confition per port in vlan. |
| 1.3.6.1.4.1.2751.100.8.4.1.1 | ColumnpriIgmpSnoopingLimitVlanID | not-accessible | current | This value is vlan's ID which enable ip igmp snooping. |
| 1.3.6.1.4.1.2751.100.8.4.1.2 | ColumnpriIgmpSnoopingLimitPortIndex | not-accessible | current | This value is port's Index. |
| 1.3.6.1.4.1.2751.100.8.4.1.3 | ColumnpriIgmpSnoopingLimitPortGroupNum | read-write | current | set the maximum IGMP group the port can join.Default:FFFFFFFF, if only set source_num, when geting ,the result is -1(FFFFFFFF) |
| 1.3.6.1.4.1.2751.100.8.4.1.4 | ColumnpriIgmpSnoopingLimitPortSourceNum | read-write | current | set the maximum source number the port can join.Default:FFFFFFFF, if only set group_num, when geting ,the result is -1(FFFFFFFF) |
| 1.3.6.1.4.1.2751.100.8.4.1.5 | ColumnpriIgmpSnoopingLimitPortStrategy | read-write | current | configure the strategy over limit. |
| 1.3.6.1.4.1.2751.100.8.4.1.6 | ColumnpriIgmpSnoopingLimitPortStatus | read-write | current | the status of limitPort:enable(1) to enable value of limitation; disable(0) is to disable value of limitation. |
| 1.3.6.1.4.1.2751.100.9 | NodepriQinQmib | |||
| 1.3.6.1.4.1.2751.100.9.1 | Tabledot1qTunnelTable | not-accessible | current | port of qinq tunnel function list |
| 1.3.6.1.4.1.2751.100.9.1.1 | Rowdot1qTunnelEntry | not-accessible | current | configure of dot1qTunnel |
| 1.3.6.1.4.1.2751.100.9.1.1.1 | ColumnqinqPortIndex | not-accessible | current | port index |
| 1.3.6.1.4.1.2751.100.9.1.1.2 | ColumntunnelPortEnable | read-write | current | Enable or disable the dot1q-tunnel in this port. |
| 1.3.6.1.4.1.2751.100.9.1.1.3 | ColumntunnelPortType | read-write | current | Protocol type of trunk port(TPID)(exp:33024(0x8100)/37120(0x9100)/37376(0x9200)). |
| 1.3.6.1.4.1.2751.100.9.2 | TablevlanTranslationTable | not-accessible | current | VLAN translation basic config. |
| 1.3.6.1.4.1.2751.100.9.2.1 | RowvlanTranslationEntry | not-accessible | current | VLAN translation |
| 1.3.6.1.4.1.2751.100.9.2.1.1 | ColumntranslatPortIndex | not-accessible | current | Index of Port. |
| 1.3.6.1.4.1.2751.100.9.2.1.2 | ColumntranslationEnable | read-write | current | if the port can be done translation function |
| 1.3.6.1.4.1.2751.100.9.2.1.3 | ColumntranslationDropType | read-write | current | when VLAN-translation missed, drop packet mode |
| 1.3.6.1.4.1.2751.100.9.3 | TablevlanTranslationTypeTable | not-accessible | current | port VLAN-translation of translation relation list |
| 1.3.6.1.4.1.2751.100.9.3.1 | RowvlanTranslationTypeEntry | not-accessible | current | port VLAN translation of translation relation,index is port index and translation sort |
| 1.3.6.1.4.1.2751.100.9.3.1.1 | ColumntranslatPortTypeIndex | read-only | current | port index |
| 1.3.6.1.4.1.2751.100.9.3.1.2 | ColumntranslationType | read-only | current | translation type. in:input translation; out:output translation. |
| 1.3.6.1.4.1.2751.100.9.3.1.3 | ColumntranslationOldVlanid | read-only | current | vlantranslation pre-vid |
| 1.3.6.1.4.1.2751.100.9.3.1.4 | ColumntranslationNewVlanid | read-only | current | the new vid |
| 1.3.6.1.4.1.2751.100.9.3.1.5 | ColumntranslationTypeStatus | read-create | current | accession/delete VLAN-translation relation |
| 1.3.6.1.4.1.2751.100.10 | Nodeprisecurity | |||
| 1.3.6.1.4.1.2751.100.10.1 | Nodeacl | |||
| 1.3.6.1.4.1.2751.100.10.1.1 | NodefireWall | |||
| 1.3.6.1.4.1.2751.100.10.1.1.1 | ScalarfireWallEnable | read-write | current | firewall on-off |
| 1.3.6.1.4.1.2751.100.10.1.2 | NodetimeRange | |||
| 1.3.6.1.4.1.2751.100.10.1.2.1 | TabletimeRangeMapTable | not-accessible | current | timeRange Map Table |
| 1.3.6.1.4.1.2751.100.10.1.2.1.1 | RowtimeRangeMapEntry | not-accessible | current | timeRange Map Entry |
| 1.3.6.1.4.1.2751.100.10.1.2.1.1.1 | ColumntimeRangeMapIndex | read-only | current | TimeRange Map index,the range of it is 1-(2^32-1). |
| 1.3.6.1.4.1.2751.100.10.1.2.1.1.2 | ColumntimeRangeMapName | read-write | current | TimeRange Map name |
| 1.3.6.1.4.1.2751.100.10.1.2.1.1.3 | ColumntimeRangeMapStatus | read-write | current | TimeRange Map status |
| 1.3.6.1.4.1.2751.100.10.1.2.2 | TabletimeRangeTable | not-accessible | current | timeRange Table |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1 | RowtimeRangeEntry | not-accessible | current | timeRange Entry |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.1 | ColumntimeRangeIndex | read-only | current | TimeRange index,the allowed range is 1 to 1000. |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.2 | ColumntimeRangeSubIndex | read-only | current | TimeRange sub index,the allowed range is 1 to 1000. |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.3 | ColumntimeRangeType | read-write | current | TimeRange type |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.4 | ColumntimeRangeStartWeek | read-write | current | configurate the start week,for example: f8 means monday+tuesday+wednesday+thurday+friday, the lowest bit is not used,so fe is the biggest. |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.5 | ColumntimeRangeStartDate | read-write | current | configurate the start Date,for example YYYY.MM.DD . |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.6 | ColumntimeRangeStartTime | read-write | current | configurate the start clock,for example HH:MM:SS. |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.7 | ColumntimeRangeEndWeek | read-write | current | configurate the end week,for example: f8 means monday+tuesday+wednesday+thurday+friday, the lowest bit is not used,so fe is the biggest. |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.8 | ColumntimeRangeEndDate | read-write | current | configurate the end date,for example YYYY.MM.DD. |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.9 | ColumntimeRangeEndTime | read-write | current | configurate the end clock,for example HH:MM:SS. |
| 1.3.6.1.4.1.2751.100.10.1.2.2.1.10 | ColumntimeRangeStatus | read-write | current | status of timeRangeMapTable |
| 1.3.6.1.4.1.2751.100.10.1.3 | NodeaclConfig | |||
| 1.3.6.1.4.1.2751.100.10.1.3.1 | TablenumAclGroupTable | not-accessible | current | this table is used for building a num-acl list. |
| 1.3.6.1.4.1.2751.100.10.1.3.1.1 | RownumAclGroupEntry | not-accessible | current | numAclGroup Table's Entry |
| 1.3.6.1.4.1.2751.100.10.1.3.1.1.1 | ColumnnumAclGroupAclIndex | read-only | current | the index of number acl,ip standard <1-99>,ip extern <100-299>,mac standard <700-799>, mac extern <1100-1199>,ipv6 standard <500-599> ipv6 extern <600-699>. |
| 1.3.6.1.4.1.2751.100.10.1.3.1.1.2 | ColumnnumAclGroupMatchOrder | read-write | current | value 0 means Acl rule's priority is automatically configured, value 1 means Acl rule's priority is manually configured, but now it's not supported. |
| 1.3.6.1.4.1.2751.100.10.1.3.1.1.3 | ColumnnumAclGroupSubitemNum | read-only | current | the Number of one acl's rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.1.1.4 | ColumnnumAclGroupStatus | read-write | current | the status of number acl. |
| 1.3.6.1.4.1.2751.100.10.1.3.2 | TablenameAclGroupTable | not-accessible | current | this table is used for building a name-acl list and mapping a string of named acl to a value of number, when you want to config name-acl list,you must map at h… |
| 1.3.6.1.4.1.2751.100.10.1.3.2.1 | RownameAclGroupEntry | not-accessible | current | nameAclGroup Table's Entry |
| 1.3.6.1.4.1.2751.100.10.1.3.2.1.1 | ColumnnameAclGroupAclIndex | read-only | current | the index of name acl,the range starts at 20000. |
| 1.3.6.1.4.1.2751.100.10.1.3.2.1.2 | ColumnnameAclGroupAclName | read-write | current | the name of name-acl. |
| 1.3.6.1.4.1.2751.100.10.1.3.2.1.3 | ColumnnameAclGroupAclType | read-write | current | the type of name acl. |
| 1.3.6.1.4.1.2751.100.10.1.3.2.1.4 | ColumnnameAclGroupMatchOrder | read-write | current | value 0 means Acl rule's priority is automatically configured, value 1 means Acl rule's priority is manually configured, but now it's not supported. |
| 1.3.6.1.4.1.2751.100.10.1.3.2.1.5 | ColumnnameAclGroupSubitemNum | read-only | current | the Number of one acl's rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.2.1.6 | ColumnnameAclGroupStatus | read-write | current | the status of nameAclGroupTable. |
| 1.3.6.1.4.1.2751.100.10.1.3.3 | TableipStandardAclTable | not-accessible | current | config ip Standard Acl |
| 1.3.6.1.4.1.2751.100.10.1.3.3.1 | RowipStandardAclEntry | not-accessible | current | ip standard Table's Entry |
| 1.3.6.1.4.1.2751.100.10.1.3.3.1.1 | ColumnipStandardIndex | read-only | current | The index of ip-standard-acl group. |
| 1.3.6.1.4.1.2751.100.10.1.3.3.1.2 | ColumnipStandardSubIndex | read-only | current | The index of ip-standard-acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.3.1.3 | ColumnipStandardPriority | read-write | current | The priority of standard ip acl's rule,it is not supported now. |
| 1.3.6.1.4.1.2751.100.10.1.3.3.1.4 | ColumnipStandardAct | read-write | current | The action of acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.3.1.5 | ColumnipStandardSrcIp | read-write | current | Source IP-address of basic acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.3.1.6 | ColumnipStandardSrcIpWild | read-write | current | Source IP-address wild of basic acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.3.1.7 | ColumnipStandardStatus | read-write | current | status of the ipStandardAclTable. |
| 1.3.6.1.4.1.2751.100.10.1.3.4 | TableipExternAclTable | not-accessible | current | ip extern Acl Table |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1 | RowipExternAclEntry | not-accessible | current | ip extern Table's Entry |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.1 | ColumnipExternIndex | read-only | current | The index of ip-Extern-acl group . |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.2 | ColumnipExternSubIndex | read-only | current | The index of ip-Extern-acl rule . |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.3 | ColumnipExternPriority | read-write | current | The priority of extern ip acl's rule,it is not supported now. |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.4 | ColumnipExternAct | read-write | current | The action of acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.5 | ColumnipExternProtocal | read-write | current | The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. For… |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.6 | ColumnipExternSrcIp | read-write | current | Source IP-address of advanced acl rule,for example 10.1.1.0 . |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.7 | ColumnipExternSrcIpWild | read-write | current | Source IP-address wild of advanced acl rule,for example 0.0.0.255 . |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.8 | ColumnipExternDstIp | read-write | current | Destination IP-address of advanced acl rule,for example 10.1.1.0 . |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.9 | ColumnipExternDstIpWild | read-write | current | Destination IP-address wild of advanced acl rule,for example 0.0.0.255 . |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.10 | ColumnipExternTimeRangeName | read-write | current | The Time-range of advanced acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.11 | ColumnipExternSrcOp | read-write | current | Indicates how a packet's source TCP/UDP port number is to be compared. If the numIpExternProtocol object in the same row does not indicate TCP or UDP, this obj… |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.12 | ColumnipExternSrcPort1 | read-write | current | The source port number of the TCP or UDP protocol. If the numIpExternSrcOP object in the same row is range(5), this object will be the starting port number of … |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.13 | ColumnipExternSrcPort2 | read-write | current | The source port number of the TCP or UDP protocol. If the numIpExternSrcOP object in the same row is range(5), this object will be the ending port number of th… |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.14 | ColumnipExternDstOp | read-write | current | Indicates how a packet's Destination TCP/UDP port number is to be compared. If the numIpExternProtocol object in the same row does not indicate TCP or UDP, thi… |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.15 | ColumnipExternDstPort1 | read-write | current | The source port number of the TCP or UDP protocol. If the numIpExternDestOP object in the same row is range(5), this object will be the starting port number of… |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.16 | ColumnipExternDstPort2 | read-write | current | The source port number of the TCP or UDP protocol. If the numIpExternDestOP object in the same row is range(5), this object will be the ending port number of t… |
| 1.3.6.1.4.1.2751.100.10.1.3.4.1.17 | ColumnipExternStatus | read-write | current | now state of the access-list. |
| 1.3.6.1.4.1.2751.100.10.1.3.5 | TablemacStandardAclTable | not-accessible | current | mac Standard Acl Table |
| 1.3.6.1.4.1.2751.100.10.1.3.5.1 | RowmacStandardAclEntry | not-accessible | current | mac standard Table's Entry |
| 1.3.6.1.4.1.2751.100.10.1.3.5.1.1 | ColumnmacStandardIndex | read-only | current | The index of mac-standard-acl group . |
| 1.3.6.1.4.1.2751.100.10.1.3.5.1.2 | ColumnmacStandardSubIndex | read-only | current | The index of mac-standard-acl rule . |
| 1.3.6.1.4.1.2751.100.10.1.3.5.1.3 | ColumnmacStandardPriority | read-write | current | The priority of standard mac acl's rule,it is not supported now. |
| 1.3.6.1.4.1.2751.100.10.1.3.5.1.4 | ColumnmacStandardAct | read-write | current | The action of acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.5.1.5 | ColumnmacStandardSrcMac | read-write | current | Source Mac-address of basic acl rule,for example : ff-ff-ff-ff-ff-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.5.1.6 | ColumnmacStandardSrcMacWild | read-write | current | Source Mac-address's anti-mask of basic acl rule,for example : ff-ff-ff-ff-00-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.5.1.7 | ColumnmacStandardStatus | read-write | current | status of the access-list. |
| 1.3.6.1.4.1.2751.100.10.1.3.6 | TablemacExternAclTable | not-accessible | current | mac extern Acl Table |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1 | RowmacExternAclEntry | not-accessible | current | mac extern Table's Entry |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.1 | ColumnmacExternIndex | read-only | current | The index of Mac-Extern-acl group. |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.2 | ColumnmacExternSubIndex | read-only | current | The index of Mac-Extern-acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.3 | ColumnmacExternPriority | read-write | current | The priority of extern mac acl's rule,it is not supported now. |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.4 | ColumnmacExternAct | read-write | current | The action of acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.5 | ColumnmacExternSrcMac | read-write | current | Source Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.6 | ColumnmacExternSrcMacWild | read-write | current | Source Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.7 | ColumnmacExternDstMac | read-write | current | Destination Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.8 | ColumnmacExternDstMacWild | read-write | current | Destination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.9 | ColumnmacExternPacketType | read-write | current | Indicates the message type of packets.none(0),untagged-eth2(1), untagged-802.3(2),tagged-eth2(3),tagged-802.3(4) |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.10 | ColumnmacExternEtherType | read-write | current | Value of the ethertype |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.11 | ColumnmacExternEtherTypeWild | read-write | current | Anti-mask of the ethertype |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.12 | ColumnmacExternCos | read-write | current | value of the cos |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.13 | ColumnmacExternCosWild | read-write | current | Anti-mask of the cos |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.14 | ColumnmacExternVlanId | read-write | current | vlan id |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.15 | ColumnmacExternVlanIdWild | read-write | current | Anti-mask of the vlan id |
| 1.3.6.1.4.1.2751.100.10.1.3.6.1.16 | ColumnmacExternStatus | read-write | current | now state of the access-list. |
| 1.3.6.1.4.1.2751.100.10.1.3.7 | Tableipv6StandardAclTable | not-accessible | current | ipv6 Standard Acl Table |
| 1.3.6.1.4.1.2751.100.10.1.3.7.1 | Rowipv6StandardAclEntry | not-accessible | current | ipv6 standard Table's Entry |
| 1.3.6.1.4.1.2751.100.10.1.3.7.1.1 | Columnipv6StandardIndex | read-only | current | The index of ipv6-standard-acl group. |
| 1.3.6.1.4.1.2751.100.10.1.3.7.1.2 | Columnipv6StandardSubIndex | read-only | current | The index of ipv6-standard-acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.7.1.3 | Columnipv6StandardPriority | read-write | current | The priority of standard ipv6 acl's rule,it is not supported now. |
| 1.3.6.1.4.1.2751.100.10.1.3.7.1.4 | Columnipv6StandardAct | read-write | current | The action of acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.7.1.5 | Columnipv6StandardSrcIp | read-write | current | Source IPV6-address of basic acl rule,for example : 3ffe:506::100. |
| 1.3.6.1.4.1.2751.100.10.1.3.7.1.6 | Columnipv6StandardSrcPrefixLen | read-write | current | Source IPV6-address prefix length of basic acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.7.1.7 | Columnipv6StandardStatus | read-write | current | now state of the access-list. |
| 1.3.6.1.4.1.2751.100.10.1.3.8 | Tableipv6ExternAclTable | not-accessible | current | ipv6 extern Acl Table |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1 | Rowipv6ExternAclEntry | not-accessible | current | ipv6 extern Table's Entry |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.1 | Columnipv6ExternIndex | read-write | current | The index of ipv6-Extern-acl group . |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.2 | Columnipv6ExternSubIndex | read-write | current | The index of ipv6-Extern-acl rule . |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.3 | Columnipv6ExternPriority | read-write | current | The priority of extern ipv6 acl's rule,it is not supported now. |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.4 | Columnipv6ExternAct | read-write | current | The action of acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.5 | Columnipv6ExternProtocal | read-write | current | The protocol number field in the IP header used to indicate the higher layer protocol as specified . For example : 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP… |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.6 | Columnipv6ExternSrcIp | read-write | current | Source IPV6-address of advanced acl rule,for example : 3ffe:506::100. |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.7 | Columnipv6ExternSrcPreLen | read-write | current | Source IP-address prefix length of advanced acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.8 | Columnipv6ExternDstIp | read-write | current | Destination IPV6-address of advanced acl rule,for example : 3ffe:506::100. |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.9 | Columnipv6ExternDstPreLen | read-write | current | Destination IPV6-address prefix length of advanced acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.10 | Columnipv6ExternTimeRangeName | read-write | current | The Time-range of advanced acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.11 | Columnipv6ExternSrcOp | read-write | current | Indicates how a packet's source TCP/UDP port number is to be compared. If the ipv6ExternProtocal object in the same row does not indicate TCP or UDP, this obje… |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.12 | Columnipv6ExternSrcPort1 | read-write | current | The source port number of the TCP or UDP protocol. If the ipv6ExternSrcOp object in the same row is range(5), this object will be the starting port number of t… |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.13 | Columnipv6ExternSrcPort2 | read-write | current | The source port number of the TCP or UDP protocol. If the ipv6ExternSrcOp object in the same row is range(5), this object will be the ending port number of the… |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.14 | Columnipv6ExternDstOp | read-write | current | Indicates how a packet's Destination TCP/UDP port number is to be compared. If the ipv6ExternProtocal object in the same row does not indicate TCP or UDP, this… |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.15 | Columnipv6ExternDstPort1 | read-write | current | The Destination port number of the TCP or UDP protocol. If the ipv6ExternDstOp object in the same row is range(5), this object will be the starting port number… |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.16 | Columnipv6ExternDstPort2 | read-write | current | The Destination port number of the TCP or UDP protocol. If the ipv6ExternDstOp object in the same row is range(5), this object will be the ending port number o… |
| 1.3.6.1.4.1.2751.100.10.1.3.8.1.17 | Columnipv6ExternStatus | read-write | current | status of ipv6ExternAclTable. |
| 1.3.6.1.4.1.2751.100.10.1.3.9 | TablemacIpExternAclTable | not-accessible | current | mac-ip extern Acl Table |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1 | RowmacIpExternAclEntry | not-accessible | current | mac-ip extern Table's Entry |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.1 | ColumnmacIpExternIndex | read-only | current | The index of macIp-Extern-acl group . |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.2 | ColumnmacIpExternSubIndex | read-only | current | The index of macIp-Extern-acl rule . |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.3 | ColumnmacIpExternPriority | read-write | current | The priority of extern macIp acl's rule,it is not supported now. |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.4 | ColumnmacIpExternAct | read-write | current | The action of acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.5 | ColumnmacIpExternProtocal | read-write | current | The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. For… |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.6 | ColumnmacIpExternSrcMac | read-write | current | Source Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.7 | ColumnmacIpExternSrcMacWild | read-write | current | Source Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.8 | ColumnmacIpExternDstMac | read-write | current | Destination Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.9 | ColumnmacIpExternDstMacWild | read-write | current | Destination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00. |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.10 | ColumnmacIpExternSrcIp | read-write | current | Source IP-address of advanced acl rule,for example 10.1.1.0 . |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.11 | ColumnmacIpExternSrcIpWild | read-write | current | Source IP-address wild of advanced acl rule,for example 0.0.0.255 . |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.12 | ColumnmacIpExternDstIp | read-write | current | Destination IP-address of advanced acl rule,for example 10.1.1.0 . |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.13 | ColumnmacIpExternDstIpWild | read-write | current | Destination IP-address wild of advanced acl rule,for example 0.0.0.255 . |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.14 | ColumnmacIpExternTimeRangeName | read-write | current | The Time-range of advanced acl rule. |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.15 | ColumnmacIpExternSrcOp | read-write | current | Indicates how a packet's source TCP/UDP port number is to be compared. If the macIpExternProtocal object in the same row does not indicate TCP or UDP, this obj… |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.16 | ColumnmacIpExternSrcPort1 | read-write | current | The source port number of the TCP or UDP protocol. If the macIpExternSrcOP object in the same row is range(5), this object will be the starting port number of … |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.17 | ColumnmacIpExternSrcPort2 | read-write | current | The source port number of the TCP or UDP protocol. If the macIpExternSrcOP object in the same row is range(5), this object will be the ending port number of th… |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.18 | ColumnmacIpExternDstOp | read-write | current | Indicates how a packet's Destination TCP/UDP port number is to be compared. If the macIpExternProtocol object in the same row does not indicate TCP or UDP, thi… |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.19 | ColumnmacIpExternDstPort1 | read-write | current | The source port number of the TCP or UDP protocol. If the macIpExternDstOP object in the same row is range(5), this object will be the starting port number of … |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.20 | ColumnmacIpExternDstPort2 | read-write | current | The source port number of the TCP or UDP protocol. If the macIpExternDstOP object in the same row is range(5), this object will be the ending port number of th… |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.21 | ColumnmacIpExternPrecedence | read-write | current | The precedence of macIp-Extern-acl . |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.22 | ColumnmacIpExternTos | read-write | current | The tos of macIp-Extern-acl . |
| 1.3.6.1.4.1.2751.100.10.1.3.9.1.23 | ColumnmacIpExternStatus | read-write | current | state of the access-list. |
| 1.3.6.1.4.1.2751.100.10.1.4 | NodeaclAttach | |||
| 1.3.6.1.4.1.2751.100.10.1.4.1 | TableaclActiveTable | not-accessible | current | bind Acl in port or vlan. |
| 1.3.6.1.4.1.2751.100.10.1.4.1.1 | RowaclActiveEntry | not-accessible | current | Entry for aclActiveTable |
| 1.3.6.1.4.1.2751.100.10.1.4.1.1.1 | ColumnaclActiveBindType | read-only | current | point out the type of position of the bind-acl. |
| 1.3.6.1.4.1.2751.100.10.1.4.1.1.2 | ColumnaclActiveIndex | read-only | current | The value of port id or vlan id . |
| 1.3.6.1.4.1.2751.100.10.1.4.1.1.3 | ColumnaclActiveType | read-only | current | the type of acl. |
| 1.3.6.1.4.1.2751.100.10.1.4.1.1.4 | ColumnaclActiveDirection | read-only | current | the direction of a binding acl. |
| 1.3.6.1.4.1.2751.100.10.1.4.1.1.5 | ColumnaclActiveAclIndex | read-write | current | the value of acl index,you have configured in aclNumAccessGroupTable or aclNameAccessGroupTable. |
| 1.3.6.1.4.1.2751.100.10.1.4.1.1.6 | ColumnaclActiveStatistic | read-write | current | support traffic statistic or not. |
| 1.3.6.1.4.1.2751.100.10.1.4.1.1.7 | ColumnaclActiveStatus | read-write | current | access or delete the bind-acl. |
| 1.3.6.1.4.1.2751.100.10.1.4.2 | TableaclStatisticClearTable | not-accessible | current | clear traffic-statistic in port or vlan. |
| 1.3.6.1.4.1.2751.100.10.1.4.2.1 | RowaclStatisticClearEntry | not-accessible | current | entry for aclStatisticClearTable |
| 1.3.6.1.4.1.2751.100.10.1.4.2.1.1 | ColumnaclStatisticClearBindType | read-only | current | point out the type of position of the bind-acl. |
| 1.3.6.1.4.1.2751.100.10.1.4.2.1.2 | ColumnaclStatisticClearDirection | read-only | current | the direction of a binding acl. |
| 1.3.6.1.4.1.2751.100.10.1.4.2.1.3 | ColumnaclStatisticClearIndex | read-only | current | The value of port id or vlan id . |
| 1.3.6.1.4.1.2751.100.10.1.4.2.1.4 | ColumnaclStatisticClearStatus | read-write | current | clear the bind-acl's traffic-statistic. |
| 1.3.6.1.4.1.2751.100.10.2 | NodesshMgt | |||
| 1.3.6.1.4.1.2751.100.10.2.1 | ScalarsshServerStatus | read-write | current | The status of Secure Shell Server, set this value to 1 to enable SSH server, set this value to 0 to disable the SSH server. |
| 1.3.6.1.4.1.2751.100.10.2.2 | ScalarsshServerVersion | read-only | current | The version of the SSH Server. |
| 1.3.6.1.4.1.2751.100.10.2.3 | ScalarsshTimeout | read-write | current | The time interval that the router waits for the SSH client to respond. The range is 10-600. |
| 1.3.6.1.4.1.2751.100.10.2.4 | ScalarsshAuthRetries | read-write | current | The number of attempts after which the interface is reset. The range is 1-10. |
| 1.3.6.1.4.1.2751.100.10.2.5 | TablesshUseTable | not-accessible | current | The table for Secure Shell Connection. |
| 1.3.6.1.4.1.2751.100.10.2.5.1 | RowsshUseEntry | not-accessible | current | The conceptual row for sshConnInfoTable. |
| 1.3.6.1.4.1.2751.100.10.2.5.1.1 | ColumnsshUserIndex | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.10.2.5.1.2 | ColumnsshUserName | read-write | current | |
| 1.3.6.1.4.1.2751.100.10.2.5.1.3 | ColumnsshUserType | read-write | current | |
| 1.3.6.1.4.1.2751.100.10.2.5.1.4 | ColumnsshUserPassword | read-write | current | |
| 1.3.6.1.4.1.2751.100.10.2.5.1.5 | ColumnsshUserStatus | read-write | current | |
| 1.3.6.1.4.1.2751.100.10.2.6 | TablesshConnInfoTable | not-accessible | current | The table for Secure Shell Connection. |
| 1.3.6.1.4.1.2751.100.10.2.6.1 | RowsshConnInfoEntry | not-accessible | current | The conceptual row for sshConnInfoTable. |
| 1.3.6.1.4.1.2751.100.10.2.6.1.1 | ColumnsshConnID | read-only | current | The connection ID of the Secure Shell Connection. |
| 1.3.6.1.4.1.2751.100.10.2.6.1.2 | ColumnsshConnVersion | read-only | current | The SSH version. |
| 1.3.6.1.4.1.2751.100.10.2.6.1.3 | ColumnsshConnStatus | read-only | current | The SSH connection State. negotiationStart(1) mean the SSH is in its negotiation start state, authenticationStart(2) mean the SSH is in authentication start st… |
| 1.3.6.1.4.1.2751.100.10.2.6.1.4 | ColumnsshConnUserName | read-only | current | User Name. |
| 1.3.6.1.4.1.2751.100.10.3 | NodetacacsMgt | |||
| 1.3.6.1.4.1.2751.100.10.3.1 | TabletacacsServerHostTable | not-accessible | current | IP address of TACACS server. |
| 1.3.6.1.4.1.2751.100.10.3.1.1 | RowtacacsServerHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.10.3.1.1.1 | ColumntacacsServerHostIndex | not-accessible | current | IP address of TACACS server. |
| 1.3.6.1.4.1.2751.100.10.3.1.1.2 | ColumntacacsServerHostIP | read-write | current | IP address of TACACS server. |
| 1.3.6.1.4.1.2751.100.10.3.1.1.3 | ColumntacacsServerHostPort | read-write | current | Port of TACACS server. |
| 1.3.6.1.4.1.2751.100.10.3.1.1.4 | ColumntacacsServerHostPrimary | read-write | current | |
| 1.3.6.1.4.1.2751.100.10.3.1.1.5 | ColumntacacsServerHostStatus | read-write | current | |
| 1.3.6.1.4.1.2751.100.10.3.1.1.6 | ColumntacacsServerHostKey | read-write | current | Key for TACACS. Input space(' ') to clear this key |
| 1.3.6.1.4.1.2751.100.10.3.1.1.7 | ColumntacacsServerHostTimeout | read-write | current | The time before retransmit of the TACACS server. |
| 1.3.6.1.4.1.2751.100.10.3.1.1.8 | ColumntacacsServerHostKeyEncryptStatus | read-write | current | If input '0' option, then the plain key is not to encrypt to ciphe. if input '1' option, then the plain key is to encrypt to ciphe, the default vlaue is '0'. |
| 1.3.6.1.4.1.2751.100.10.3.2 | ScalartacacsServerTimeout | read-write | current | The time before retransmit of the TACACS server. |
| 1.3.6.1.4.1.2751.100.10.3.3 | ScalartacacsServerKey | read-write | current | Key for TACACS. Input space(' ') to clear this key |
| 1.3.6.1.4.1.2751.100.10.3.4 | ScalartacacsServerKeyEncryptStatus | read-write | current | If input '0' option, then the plain key is not to encrypt to ciphe. if input '1' option, then the plain key is to encrypt to ciphe, the default vlaue is '0'. |
| 1.3.6.1.4.1.2751.100.10.4 | Nodeam | |||
| 1.3.6.1.4.1.2751.100.10.4.1 | ScalaramGlobalEnable | read-write | current | Global Enable or disable the Access Management. |
| 1.3.6.1.4.1.2751.100.10.4.2 | TableamPortInfoTable | not-accessible | current | Access Management information list of port. |
| 1.3.6.1.4.1.2751.100.10.4.2.1 | RowamPortInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.10.4.2.1.1 | ColumnamPortIndex | not-accessible | current | port index |
| 1.3.6.1.4.1.2751.100.10.4.2.1.2 | ColumnamPortEnable | read-write | current | Enable or disable the Access Management on the port. |
| 1.3.6.1.4.1.2751.100.10.4.2.1.3 | ColumnamPortForwardingType | read-write | current | Access Management forwarding type. |
| 1.3.6.1.4.1.2751.100.10.4.2.1.4 | ColumnamPortIp | read-only | current | IP address of Access Management. |
| 1.3.6.1.4.1.2751.100.10.4.2.1.5 | ColumnamPortMac | read-write | current | Mac address of Access Management. |
| 1.3.6.1.4.1.2751.100.10.4.2.1.6 | ColumnamPortCount | read-write | current | Seriate IP address number. |
| 1.3.6.1.4.1.2751.100.10.4.2.1.7 | ColumnamPortStatus | read-write | current | |
| 1.3.6.1.4.1.2751.100.10.5 | NoderadiusMgt | |||
| 1.3.6.1.4.1.2751.100.10.5.1 | ScalaraaaEnabled | read-write | current | Enable or disable Aaa function. |
| 1.3.6.1.4.1.2751.100.10.5.2 | ScalaraaaAccount | read-write | current | Enable or disable Aaa Accounting function. |
| 1.3.6.1.4.1.2751.100.10.5.3 | ScalaraaaAccountUpdate | read-write | current | Enable or disable Aaa Accounting update function. |
| 1.3.6.1.4.1.2751.100.10.5.4 | ScalaraaaAccountBindingDHCP | read-write | current | Enable or disable Aaa Accounting DHCP-Binding function. |
| 1.3.6.1.4.1.2751.100.10.5.5 | TableradiusAuthenServerHostTable | not-accessible | current | Configuration items and information list of RADIUS authentication server host. |
| 1.3.6.1.4.1.2751.100.10.5.5.1 | RowradiusAuthenServerHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.10.5.5.1.1 | ColumnradiusAuthenServerHostIndex | not-accessible | current | Index of RADIUS authentication server. |
| 1.3.6.1.4.1.2751.100.10.5.5.1.2 | ColumnradiusAuthenServerHostIP | read-write | current | IP address of RADIUS authentication server. |
| 1.3.6.1.4.1.2751.100.10.5.5.1.3 | ColumnradiusAuthenServerHostPort | read-write | current | Port of RADIUS authentication server. |
| 1.3.6.1.4.1.2751.100.10.5.5.1.4 | ColumnradiusAutServerHostKey | read-write | current | Key for RADIUS authentication server. Input space(' ') to clear this key |
| 1.3.6.1.4.1.2751.100.10.5.5.1.5 | ColumnradiusAuthenServerHostPrimary | read-write | current | Configuration of primary or not primary |
| 1.3.6.1.4.1.2751.100.10.5.5.1.6 | ColumnradiusAutServerHostAccessMode | read-write | current | Configuration access mode of none, dot1x or telnet |
| 1.3.6.1.4.1.2751.100.10.5.5.1.7 | ColumnradiusAuthenServerHostStatus | read-write | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.10.5.6 | TableradiusAcctServerHostTable | not-accessible | current | Configuration items and information list of RADIUS accounting server host. |
| 1.3.6.1.4.1.2751.100.10.5.6.1 | RowradiusAcctServerHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.10.5.6.1.1 | ColumnradiusAcctServerHostIndex | not-accessible | current | Index of RADIUS accounting server. |
| 1.3.6.1.4.1.2751.100.10.5.6.1.2 | ColumnradiusAcctServerHostIP | read-write | current | IP address of RADIUS accounting server. |
| 1.3.6.1.4.1.2751.100.10.5.6.1.3 | ColumnradiusAcctServerHostPort | read-write | current | Port of RADIUS accounting server. |
| 1.3.6.1.4.1.2751.100.10.5.6.1.4 | ColumnradiusAcctServerHostKey | read-write | current | Key for RADIUS accounting server. Input space(' ') to clear this key |
| 1.3.6.1.4.1.2751.100.10.5.6.1.5 | ColumnradiusAcctServerHostPrimary | read-write | current | Configuration of primary or not primary |
| 1.3.6.1.4.1.2751.100.10.5.6.1.6 | ColumnradiusAcctServerHostStatus | read-write | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.10.5.7 | ScalarradiusServerTimeout | read-write | current | The time before retransmit of the RADIUS server. |
| 1.3.6.1.4.1.2751.100.10.5.8 | ScalarradiusServerRetransmit | read-write | current | Retransmit time before giving up the current RADIUS server. |
| 1.3.6.1.4.1.2751.100.10.5.9 | ScalarradiusServerDeadTime | read-write | current | The time before retry of the down-server. |
| 1.3.6.1.4.1.2751.100.10.5.10 | ScalarradiusServerKey | read-write | current | Key for RADIUS. Input space(' ') to clear this key |
| 1.3.6.1.4.1.2751.100.10.5.11 | ScalarradiusServerAccountTimeOut | read-write | current | Accounting update interval. |
| 1.3.6.1.4.1.2751.100.10.5.12 | ScalarradiusServerNasIpv4 | read-write | current | Radius server nas IPv4. Input 0.0.0.0 to delete nas ipv4 address |
| 1.3.6.1.4.1.2751.100.10.5.13 | ScalarradiusServerNasIpv6 | read-write | current | Radius server nas IPv6. Input 0 to delete nas IPv6 address |
| 1.3.6.1.4.1.2751.100.11 | NodepriQos | |||
| 1.3.6.1.4.1.2751.100.11.1 | Nodeqos | |||
| 1.3.6.1.4.1.2751.100.11.1.1 | ScalarqosEnable | read-write | current | qos golbal switch.disable express close,enable is open. |
| 1.3.6.1.4.1.2751.100.11.1.2 | TableqosPortTable | not-accessible | current | qos port configration. |
| 1.3.6.1.4.1.2751.100.11.1.2.1 | RowqosPortEntry | not-accessible | current | qos port list of concrete definition.index is port index |
| 1.3.6.1.4.1.2751.100.11.1.2.1.1 | ColumnqosPortIndex | not-accessible | current | port Index |
| 1.3.6.1.4.1.2751.100.11.1.2.1.2 | ColumnqosPortType | read-create | current | the relation between qosPortType and CLI: 1 mls qos cos {<default-cos> }; 0 mls qos trust {cos [pass-through-cos] [pass-through-dscp]|dscp [pass-through-cos] [… |
| 1.3.6.1.4.1.2751.100.11.1.2.1.3 | ColumnqosPortCos | read-create | current | port default cos value |
| 1.3.6.1.4.1.2751.100.11.1.2.1.4 | ColumnqosPortTrust | read-create | current | Configure port trust. priority(0),mls qos trust port priority <cos>; priAndPassThroughDscp(1),opposite cli is mls qos trust port priority <cos> pass-through-ds… |
| 1.3.6.1.4.1.2751.100.11.1.2.1.5 | ColumnqosPortPriority | read-create | current | The corresponding CLI:mls qos trust port priority <cos>. |
| 1.3.6.1.4.1.2751.100.11.1.2.1.6 | ColumnqosPortMutation | read-create | current | configure port of dscp-mutation,opposite cli 'mls qos dscp-mutation <dscp-mutation-name>' |
| 1.3.6.1.4.1.2751.100.11.1.2.1.7 | ColumnqosPortQueue | read-create | current | priorityQueue configure queue out method to strict priority-queue method; wrrQueue restores the default wrr queue out method. |
| 1.3.6.1.4.1.2751.100.11.1.2.1.8 | ColumnqosPortStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.11.1.3 | TableqosClassMapTable | not-accessible | current | classmap configure list |
| 1.3.6.1.4.1.2751.100.11.1.3.1 | RowqosclassmapEntry | not-accessible | current | about classmap list of concrete definition,index is classmapname. |
| 1.3.6.1.4.1.2751.100.11.1.3.1.1 | ColumnqosClassMapName | not-accessible | current | classmap name |
| 1.3.6.1.4.1.2751.100.11.1.3.1.2 | ColumnqosClassMapType | read-create | current | 0 class-map <class-map-name>,index is classmapname; 1 match access-group <acl-index-or-name>,need qosClassMapAccessGroup cooperation; 2 match ip dscp <dscp-lis… |
| 1.3.6.1.4.1.2751.100.11.1.3.1.3 | ColumnqosClassMapAccessGroup | read-create | current | Match specify access-group (name or number). This object be configured only if qosClassMapType in the same row is accessGroup(1). |
| 1.3.6.1.4.1.2751.100.11.1.3.1.4 | ColumnqosClassMapDscp | read-create | current | Match specify Dscp. This object be configured only if qosClassMapType in the same row is dscp(2). |
| 1.3.6.1.4.1.2751.100.11.1.3.1.5 | ColumnqosClassMapV6Dscp | read-create | current | Match specify ipv6 Dscp. This object be configured only if qosClassMapType in the same row is v6dscp(5). |
| 1.3.6.1.4.1.2751.100.11.1.3.1.6 | ColumnqosClassMapIpPre | read-create | current | Match specify Ip Precedence. This object be configured only if qosClassMapType in the same row is ippre(3). |
| 1.3.6.1.4.1.2751.100.11.1.3.1.7 | ColumnqosClassMapV6AccGroup | read-create | current | Match specify Ipv6 Access-Group. This object be configured only if qosClassMapType in the same row is v6AccessGroup(8). |
| 1.3.6.1.4.1.2751.100.11.1.3.1.8 | ColumnqosClassMapV6Flow | read-create | current | Match specify Ipv6 Flowlabel. This object be configured only if qosClassMapType in the same row is v6Flow(6). |
| 1.3.6.1.4.1.2751.100.11.1.3.1.9 | ColumnqosClassMapVlan | read-create | current | Match specify Vlan list . At most 8 vlan id. This object be configured only if qosClassMapType in the same row is vlan(4). |
| 1.3.6.1.4.1.2751.100.11.1.3.1.10 | ColumnqosClassCos | read-create | current | Match specify Cos . This object be configured only if qosClassMapType in the same row is cos(9). |
| 1.3.6.1.4.1.2751.100.11.1.3.1.11 | ColumnqosClassMapEXPtopmost | read-create | current | Match specify MPLS EXP. This object be configured only if qosClassMapType in the same row is EXPtopmost(10). |
| 1.3.6.1.4.1.2751.100.11.1.3.1.12 | ColumnqosClassMapStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.11.1.4 | TableqosPolicyTable | not-accessible | current | qos policy list |
| 1.3.6.1.4.1.2751.100.11.1.4.1 | RowqosPolicyEntry | not-accessible | current | qos policy list of definition,index is qos policy and classmap of name |
| 1.3.6.1.4.1.2751.100.11.1.4.1.1 | ColumnqosPolicyName | not-accessible | current | QoS Policy name |
| 1.3.6.1.4.1.2751.100.11.1.4.1.2 | ColumnqosPolicyClassMap | read-create | current | Specify the classmap name.After a policy map is created, it can be associated to a class. So, if you want the class map to match the policy map,please setting … |
| 1.3.6.1.4.1.2751.100.11.1.4.1.3 | ColumnqosPolicyType | read-create | current | the relation between qosPolicyType and CLI: 0 policy-map <policy-map-name>; 1 class <class-map-name>; 2 police <rate-kbps> <burst-kbyte> [exceed-action {drop |… |
| 1.3.6.1.4.1.2751.100.11.1.4.1.4 | ColumnqosPolicyRateKbps | read-create | current | Rate Bandwidth of one policymap. This object be configured only if qosPolicyType in the same row is sp(2). |
| 1.3.6.1.4.1.2751.100.11.1.4.1.5 | ColumnqosPolicyNormalBurstKbps | read-create | current | Normal burst kbytes. |
| 1.3.6.1.4.1.2751.100.11.1.4.1.6 | ColumnqosPolicyMaximumBurstKbps | read-create | current | Maximum burst kbytes. |
| 1.3.6.1.4.1.2751.100.11.1.4.1.7 | ColumnqosPolicyPeakKbps | read-create | current | Peak information rate. |
| 1.3.6.1.4.1.2751.100.11.1.4.1.8 | ColumnqosPolicyConformAction | read-create | current | conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed… |
| 1.3.6.1.4.1.2751.100.11.1.4.1.9 | ColumnqosPolicyConformActionChangeValue | read-create | current | If conform-action is set-dscp-transmit(2),the value is between 0-63; else if conform-action is set-prec-transmit(2),the value is between 0-7. |
| 1.3.6.1.4.1.2751.100.11.1.4.1.10 | ColumnqosPolicyExceedAction | read-create | current | exceed-action transmit means send packets without any change when specified speed is exceeded; exceed-action drop means drop packets when specified speed is ex… |
| 1.3.6.1.4.1.2751.100.11.1.4.1.11 | ColumnqosPolicyViolateAction | read-create | current | violate-action transmit means send packets without any change when specified speed is violate; violate-action drop means drop packets when specified speed is v… |
| 1.3.6.1.4.1.2751.100.11.1.4.1.12 | ColumnqosPolicyAggregatePolicer | read-create | current | aggregate-policer-name. This object be configured only if qosPolicyType in the same row is aggregatePolicer(3). |
| 1.3.6.1.4.1.2751.100.11.1.4.1.13 | ColumnqosPolicyStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.11.1.5 | TableqosAggPolicerTable | not-accessible | current | qos of AggPolicer list,use it can configure one item AggPolicer,Attention : the get/get next operation can only get snmp cache content, please refer to qosshow… |
| 1.3.6.1.4.1.2751.100.11.1.5.1 | RowqosAggPolicerEntry | not-accessible | current | index is AggPolicer name. |
| 1.3.6.1.4.1.2751.100.11.1.5.1.1 | ColumnqosAggPolicerName | not-accessible | current | QoS qosAggPolicer name |
| 1.3.6.1.4.1.2751.100.11.1.5.1.2 | ColumnqosAggPolicerRateKbps | read-create | current | Rate Bandwidth of After the classification. |
| 1.3.6.1.4.1.2751.100.11.1.5.1.3 | ColumnqosAggPolicerNormalBurstKbps | read-create | current | Normal burst kbytes. |
| 1.3.6.1.4.1.2751.100.11.1.5.1.4 | ColumnqosAggPolicerMaximumBurstKbps | read-create | current | Maximum burst kbytes. |
| 1.3.6.1.4.1.2751.100.11.1.5.1.5 | ColumnqosAggPolicerPeakKbps | read-create | current | Peak information rate. |
| 1.3.6.1.4.1.2751.100.11.1.5.1.6 | ColumnqosAggPolicerConformAction | read-create | current | conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed… |
| 1.3.6.1.4.1.2751.100.11.1.5.1.7 | ColumnqosAggPolicerConformActionChangeValue | read-create | current | If conform-action is set-dscp-transmit(2),the value is between 0-63; else if conform-action is set-prec-transmit(2),the value is between 0-7. |
| 1.3.6.1.4.1.2751.100.11.1.5.1.8 | ColumnqosAggPolicerExceedAction | read-create | current | exceed-action transmit means send packets without any change when specified speed is exceeded; exceed-action drop means drop packets when specified speed is ex… |
| 1.3.6.1.4.1.2751.100.11.1.5.1.9 | ColumnqosAggPolicerViolateAction | read-create | current | violate-action transmit means send packets without any change when specified speed is violate; violate-action drop means drop packets when specified speed is v… |
| 1.3.6.1.4.1.2751.100.11.1.5.1.10 | ColumnqosAggPolicerStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.11.1.6 | TableqosSetTable | not-accessible | current | remark new dscp or ip precedence for classified flow |
| 1.3.6.1.4.1.2751.100.11.1.6.1 | RowqosSetEntry | not-accessible | current | qosSetTable list of acce index policyname and classmap name. |
| 1.3.6.1.4.1.2751.100.11.1.6.1.1 | ColumnqosSetPolicyMapName | not-accessible | current | QoS Policy name |
| 1.3.6.1.4.1.2751.100.11.1.6.1.2 | ColumnqosSetClassMapName | read-create | current | QoS class map name |
| 1.3.6.1.4.1.2751.100.11.1.6.1.3 | ColumnqosSetType | read-create | current | qosSetType range:1,2,3,4,5,6,7,8,9 1 dscp Set IP DSCP (DiffServ CodePoints); 2 precedence Set IP precedence; 3 nexthop Set IP nexthop; 4 dscp Set IPv6 DSCP (Di… |
| 1.3.6.1.4.1.2751.100.11.1.6.1.4 | ColumnqosSetdscp | read-create | current | remark dscp for the classified flow |
| 1.3.6.1.4.1.2751.100.11.1.6.1.5 | ColumnqosSetprecedence | read-create | current | remark ip precedence for classified flow |
| 1.3.6.1.4.1.2751.100.11.1.6.1.6 | ColumnqosSetnextHop | read-create | current | set nexthop for classified flow |
| 1.3.6.1.4.1.2751.100.11.1.6.1.7 | ColumnqosSetv6Dscp | read-create | current | remark ipv6 dscp for classified flow |
| 1.3.6.1.4.1.2751.100.11.1.6.1.8 | ColumnqosSetv6FlowLabel | read-create | current | remark ipv6 flow lable for classified flow |
| 1.3.6.1.4.1.2751.100.11.1.6.1.9 | ColumnqosSetv6nextHop | read-create | current | set IPv6 nexthop for classified flow |
| 1.3.6.1.4.1.2751.100.11.1.6.1.10 | ColumnqosSetCos | read-create | current | remark cos for classified flow |
| 1.3.6.1.4.1.2751.100.11.1.6.1.11 | ColumnqosSetEXPimposition | read-create | current | remark MPLS EXP value for classified flow |
| 1.3.6.1.4.1.2751.100.11.1.6.1.12 | ColumnqosSetStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.11.1.7 | TableqosPortBindTable | not-accessible | current | Apply a policy map to the specified port. |
| 1.3.6.1.4.1.2751.100.11.1.7.1 | RowqosPortBindEntry | not-accessible | current | the index of this entry is port-index and policy-map |
| 1.3.6.1.4.1.2751.100.11.1.7.1.1 | ColumnqosPortBindIndex | not-accessible | current | QoS Port Index |
| 1.3.6.1.4.1.2751.100.11.1.7.1.2 | ColumnqosPortBindPolicy | not-accessible | current | QoS Policy name |
| 1.3.6.1.4.1.2751.100.11.1.7.1.3 | ColumnqosPortBindType | read-create | current | input(1),bind the policy-map to ingress port; output(2),bind the policy-map to egress port; noinput(3),unbind the policy-map to ingress port; nooutput(4), unbi… |
| 1.3.6.1.4.1.2751.100.11.1.8 | TableqosPortQueueTable | not-accessible | current | set golbal qos WRR weight |
| 1.3.6.1.4.1.2751.100.11.1.8.1 | RowqosPortQueueEntry | not-accessible | current | set port qos WRR weight,index is port index. |
| 1.3.6.1.4.1.2751.100.11.1.8.1.1 | ColumnqosPortQueueIndex | not-accessible | current | QoS Port Index |
| 1.3.6.1.4.1.2751.100.11.1.8.1.2 | ColumnqosPortQueueWeight1 | read-create | current | WRR weight,range is 0~15. |
| 1.3.6.1.4.1.2751.100.11.1.8.1.3 | ColumnqosPortQueueWeight2 | read-create | current | WRR weight,range is 0~15. |
| 1.3.6.1.4.1.2751.100.11.1.8.1.4 | ColumnqosPortQueueWeight3 | read-create | current | WRR weight,range is 0~15. |
| 1.3.6.1.4.1.2751.100.11.1.8.1.5 | ColumnqosPortQueueWeight4 | read-create | current | WRR weight,range is 0~15. |
| 1.3.6.1.4.1.2751.100.11.1.8.1.6 | ColumnqosPortQueueWeight5 | read-create | current | WRR weight,range is 0~15. |
| 1.3.6.1.4.1.2751.100.11.1.8.1.7 | ColumnqosPortQueueWeight6 | read-create | current | WRR weight,range is 0~15. |
| 1.3.6.1.4.1.2751.100.11.1.8.1.8 | ColumnqosPortQueueWeight7 | read-create | current | WRR weight,range is 0~15. |
| 1.3.6.1.4.1.2751.100.11.1.8.1.9 | ColumnqosPortQueueWeight8 | read-create | current | WRR weight,range is 0~15. |
| 1.3.6.1.4.1.2751.100.11.1.8.1.10 | ColumnqosPortQueueStatus | read-create | current | Setting it to active(1) creates an entry.Setting it to destroy(2) destroys an entry. |
| 1.3.6.1.4.1.2751.100.11.1.10 | NodeqosMap | |||
| 1.3.6.1.4.1.2751.100.11.1.10.1 | ScalarqosMapType | read-create | current | qosMapType range is 1~5.1 mls qos map cos-dscp <dscp1...dscp8>; 2 mls qos map dscp-cos <dscp-list> to <cos>; 3 mls qos map dscp-mutation <dscp-mutation-name> <… |
| 1.3.6.1.4.1.2751.100.11.1.10.2 | ScalarqosMapDscp1 | read-create | current | DSCP-CoS map,DSCP range is 0~63 |
| 1.3.6.1.4.1.2751.100.11.1.10.3 | ScalarqosMapDscp2 | read-create | current | DSCP-CoS map,DSCP range is 0~63 |
| 1.3.6.1.4.1.2751.100.11.1.10.4 | ScalarqosMapDscp3 | read-create | current | DSCP-CoS map,DSCP range is 0~63 |
| 1.3.6.1.4.1.2751.100.11.1.10.5 | ScalarqosMapDscp4 | read-create | current | DSCP-CoS map,DSCP range is 0~63 |
| 1.3.6.1.4.1.2751.100.11.1.10.6 | ScalarqosMapDscp5 | read-create | current | DSCP-CoS map,DSCP range is 0~63 |
| 1.3.6.1.4.1.2751.100.11.1.10.7 | ScalarqosMapDscp6 | read-create | current | DSCP-CoS map,DSCP range is 0~63 |
| 1.3.6.1.4.1.2751.100.11.1.10.8 | ScalarqosMapDscp7 | read-create | current | DSCP-CoS map,DSCP range is 0~63 |
| 1.3.6.1.4.1.2751.100.11.1.10.9 | ScalarqosMapDscp8 | read-create | current | DSCP-CoS map,DSCP range is 0~63 |
| 1.3.6.1.4.1.2751.100.11.1.10.10 | ScalarqosMapCos | read-create | current | the cos which DSCP map to |
| 1.3.6.1.4.1.2751.100.11.1.10.11 | ScalarqosMapEXP | read-create | current | the EXP value which DSCP map to |
| 1.3.6.1.4.1.2751.100.11.1.10.12 | ScalarqosMapMarkDownDscp | read-create | current | the dscp after mark down |
| 1.3.6.1.4.1.2751.100.11.1.10.13 | ScalarqosMapMarkDownType | read-create | current | normal-burst:markdown map used by the exceed-action;max-burst:markdown map used by the violate-action. |
| 1.3.6.1.4.1.2751.100.11.1.10.14 | ScalarqosMapMutationName | read-create | current | map name |
| 1.3.6.1.4.1.2751.100.11.1.10.15 | ScalarqosMapMutationOut | read-create | current | egress DSCP,only one,eight ingress DSCP value map to one egress value |
| 1.3.6.1.4.1.2751.100.11.1.10.16 | ScalarqosMapStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.11.1.11 | Nodeshowqos | |||
| 1.3.6.1.4.1.2751.100.11.1.11.1 | TableshowclassmapTable | not-accessible | current | show class map table |
| 1.3.6.1.4.1.2751.100.11.1.11.1.1 | RowshowclassmapEntry | not-accessible | current | show class map entry |
| 1.3.6.1.4.1.2751.100.11.1.11.1.1.1 | Columnshowclassmapname | not-accessible | current | classmap name |
| 1.3.6.1.4.1.2751.100.11.1.11.1.1.2 | Columnshowclassmapmatch | read-only | current | one item classmap match rule |
| 1.3.6.1.4.1.2751.100.11.1.11.2 | TableshowpolicymapTable | not-accessible | current | show policy list |
| 1.3.6.1.4.1.2751.100.11.1.11.2.1 | RowshowpolicymapEntry | not-accessible | current | policy map entry |
| 1.3.6.1.4.1.2751.100.11.1.11.2.1.1 | Columnshowpolicymapname | not-accessible | current | policy name |
| 1.3.6.1.4.1.2751.100.11.1.11.2.1.2 | Columnshowpolicymapcontent | read-only | current | the match classmap and all defined other rules |
| 1.3.6.1.4.1.2751.100.11.1.11.3 | TableshowqosaggregatepolicerTable | not-accessible | current | display aggregatepolicer list |
| 1.3.6.1.4.1.2751.100.11.1.11.3.1 | RowshowqosaggregatepolicerEntry | not-accessible | current | aggregatepolicer entry,index is showqosaggregatepolicername |
| 1.3.6.1.4.1.2751.100.11.1.11.3.1.1 | Columnshowqosaggregatepolicername | not-accessible | current | aggregatepolicer name |
| 1.3.6.1.4.1.2751.100.11.1.11.3.1.2 | Columnshowqosaggregatepolicercontent | read-only | current | aggregatepolicer parameter |
| 1.3.6.1.4.1.2751.100.11.1.11.4 | TableshowmlsqosinterfaceTable | not-accessible | current | show port qos configuration |
| 1.3.6.1.4.1.2751.100.11.1.11.4.1 | RowshowmlsqosinterfaceEntry | not-accessible | current | showmlsqosinterfaceTable,index is port-index |
| 1.3.6.1.4.1.2751.100.11.1.11.4.1.1 | ColumnshowmlsqosinterfaceIndex | not-accessible | current | port index |
| 1.3.6.1.4.1.2751.100.11.1.11.4.1.2 | Columnshowmlsqosinterfaceqoscontent | read-only | current | qos port configuration |
| 1.3.6.1.4.1.2751.100.11.1.11.5 | Nodeshowmlsqosmaps | |||
| 1.3.6.1.4.1.2751.100.11.1.11.5.1 | Scalarshowmlsqosmapscosdscp | read-only | current | cos-dscp map |
| 1.3.6.1.4.1.2751.100.11.1.11.5.2 | Scalarshowmlsqosmapscosqueue | read-only | current | COS-wrr-queue map |
| 1.3.6.1.4.1.2751.100.11.1.11.5.3 | Scalarshowmlsqosmapsdscpcos | read-only | current | DSCP-COS map |
| 1.3.6.1.4.1.2751.100.11.1.11.5.4 | Scalarshowmlsqosmapsipprecdscp | read-only | current | IP precedence to DSCP map |
| 1.3.6.1.4.1.2751.100.11.1.11.5.5 | Scalarshowmlsqosmapspoliceddscp | read-only | current | DSCP mark down map |
| 1.3.6.1.4.1.2751.100.11.1.11.5.6 | Scalarshowmlsqosmapspoliceddscpnormalburst | read-only | current | Normal Burst Policed-dscp map |
| 1.3.6.1.4.1.2751.100.11.1.11.5.7 | Scalarshowmlsqosmapsexpdscp | read-only | current | EXP to DSCP map |
| 1.3.6.1.4.1.2751.100.11.1.11.5.8 | Scalarshowmlsqosmapsdscpexp | read-only | current | DSCP to EXP map |
| 1.3.6.1.4.1.2751.100.11.1.11.6 | TableshowmlsqosmapsdscpmutationTable | not-accessible | current | ingress DSCP to egress DSCP map |
| 1.3.6.1.4.1.2751.100.11.1.11.6.1 | RowshowmlsqosmapsdscpmutationEntry | not-accessible | current | index is dscpmutationname |
| 1.3.6.1.4.1.2751.100.11.1.11.6.1.1 | Columnshowmlsqosmapsdscpmutationname | not-accessible | current | dscpmutationname. |
| 1.3.6.1.4.1.2751.100.11.1.11.6.1.2 | Columnshowmlsqosmapsdscpmutationcontent | read-only | current | DSCP-DSCP map |
| 1.3.6.1.4.1.2751.100.11.2 | Nodeqos3 | |||
| 1.3.6.1.4.1.2751.100.11.2.1 | Tableqos3PolicyMapGroupTable | not-accessible | current | this table is used for building a policy and mapping the named policy to number, if you want to configure a policy,you must map at here. |
| 1.3.6.1.4.1.2751.100.11.2.1.1 | Rowqos3PolicyMapGroupEntry | not-accessible | current | entry for policy map group. |
| 1.3.6.1.4.1.2751.100.11.2.1.1.1 | Columnqos3PolicyMapGroupIndex | read-only | current | the range is 0-(2^64 - 1). |
| 1.3.6.1.4.1.2751.100.11.2.1.1.2 | Columnqos3PolicyMapGroupName | read-write | current | the policy name |
| 1.3.6.1.4.1.2751.100.11.2.1.1.3 | Columnqos3PolicyMapGroupIsExt | read-write | current | indicate that whether the policy used on extand field processor. |
| 1.3.6.1.4.1.2751.100.11.2.1.1.4 | Columnqos3PolicyMapGroupStatus | read-write | current | the status of qos3PolicyMapGroupTable |
| 1.3.6.1.4.1.2751.100.11.2.2 | Tableqos3ClassMapTable | not-accessible | current | this table is used for configuring the filter rule of qos |
| 1.3.6.1.4.1.2751.100.11.2.2.1 | Rowqos3ClassMapEntry | not-accessible | current | entry for class map. |
| 1.3.6.1.4.1.2751.100.11.2.2.1.1 | Columnqos3ClassMapName | read-only | current | the name of class |
| 1.3.6.1.4.1.2751.100.11.2.2.1.2 | Columnqos3ClassMapType | read-write | current | the clss type that you want to matching. |
| 1.3.6.1.4.1.2751.100.11.2.2.1.3 | Columnqos3ClassMapValue | read-write | current | the value of you choosed type at last node,the limits: cos <0-7> dscp <0-63> ipPrecedence<0-7> ipv6Dscp<0-63> vlan <1-4094> ipv6Flowlabel<0-1048575> exp is not… |
| 1.3.6.1.4.1.2751.100.11.2.2.1.4 | Columnqos3ClassMapUsedTime | read-only | current | display how many times the class used. |
| 1.3.6.1.4.1.2751.100.11.2.2.1.5 | Columnqos3ClassMapStatus | read-write | current | the status of qos3ClassMapTable,destroy(2) will destroy the whole class-map,remove(3) just clear the value of qos3ClassMapValue. |
| 1.3.6.1.4.1.2751.100.11.2.3 | Tableqos3AggregatePolicyTable | not-accessible | current | this table is used for configuring aggregate policy. |
| 1.3.6.1.4.1.2751.100.11.2.3.1 | Rowqos3AggregatePolicyEntry | not-accessible | current | entry for aggregate policy. |
| 1.3.6.1.4.1.2751.100.11.2.3.1.1 | Columnqos3AggPolicyMapName | read-only | current | the name of aggregate policy. |
| 1.3.6.1.4.1.2751.100.11.2.3.1.2 | Columnqos3AggPolicyCIRKbps | read-write | current | CIR(Committed Information Rate) Kbits per second <1-10000000> |
| 1.3.6.1.4.1.2751.100.11.2.3.1.3 | Columnqos3AggPolicyCBSKbps | read-write | current | CBS(Committed Burst Size) Kbytes <1-1000000> |
| 1.3.6.1.4.1.2751.100.11.2.3.1.4 | Columnqos3AggPolicyPBSKbps | read-write | current | PBS(Peak Burst Size) Kbytes <1-1000000> |
| 1.3.6.1.4.1.2751.100.11.2.3.1.5 | Columnqos3AggPolicyPIRKbps | read-write | current | PIR(Peak Information Rate) Kbits per second <1-10000000> |
| 1.3.6.1.4.1.2751.100.11.2.3.1.6 | Columnqos3AggPolicyConformAction | read-write | current | Action when rate is not exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). |
| 1.3.6.1.4.1.2751.100.11.2.3.1.7 | Columnqos3AggPolicyconformSetCos | read-write | current | Set COS |
| 1.3.6.1.4.1.2751.100.11.2.3.1.8 | Columnqos3AggPolicyconformSetDscp | read-write | current | Change dscp |
| 1.3.6.1.4.1.2751.100.11.2.3.1.9 | Columnqos3AggPolicyconformSetPrec | read-write | current | Change precedence |
| 1.3.6.1.4.1.2751.100.11.2.3.1.10 | Columnqos3AggPolicyconformSetIntp | read-write | current | Set Internal priority |
| 1.3.6.1.4.1.2751.100.11.2.3.1.11 | Columnqos3AggPolicyconformSetDp | read-write | current | Set Drop priority |
| 1.3.6.1.4.1.2751.100.11.2.3.1.12 | Columnqos3AggPolicyExceedAction | read-write | current | Action when rate is exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). |
| 1.3.6.1.4.1.2751.100.11.2.3.1.13 | Columnqos3AggPolicyExceedSetCos | read-write | current | Set COS |
| 1.3.6.1.4.1.2751.100.11.2.3.1.14 | Columnqos3AggPolicyExceedSetDscp | read-write | current | Change dscp |
| 1.3.6.1.4.1.2751.100.11.2.3.1.15 | Columnqos3AggPolicyExceedSetPrec | read-write | current | Change precedence |
| 1.3.6.1.4.1.2751.100.11.2.3.1.16 | Columnqos3AggPolicyExceedSetIntp | read-write | current | Set Internal priority |
| 1.3.6.1.4.1.2751.100.11.2.3.1.17 | Columnqos3AggPolicyExceedSetDp | read-write | current | Set Drop priority |
| 1.3.6.1.4.1.2751.100.11.2.3.1.18 | Columnqos3AggPolicyViolateAction | read-write | current | Action when rate is violated,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). |
| 1.3.6.1.4.1.2751.100.11.2.3.1.19 | Columnqos3AggPolicyViolateSetCos | read-write | current | Set COS |
| 1.3.6.1.4.1.2751.100.11.2.3.1.20 | Columnqos3AggPolicyViolateSetDscp | read-write | current | Change dscp |
| 1.3.6.1.4.1.2751.100.11.2.3.1.21 | Columnqos3AggPolicyViolateSetPrec | read-write | current | Change precedence |
| 1.3.6.1.4.1.2751.100.11.2.3.1.22 | Columnqos3AggPolicyViolateSetIntp | read-write | current | Set Internal priority |
| 1.3.6.1.4.1.2751.100.11.2.3.1.23 | Columnqos3AggPolicyViolateSetDp | read-write | current | Set Drop priority |
| 1.3.6.1.4.1.2751.100.11.2.3.1.24 | Columnqos3AggPolicyStatus | read-write | current | the status of qos3AggregatePolicyTable |
| 1.3.6.1.4.1.2751.100.11.2.4 | Tableqos3PolicyTable | not-accessible | current | this table is used for configuring policy |
| 1.3.6.1.4.1.2751.100.11.2.4.1 | Rowqos3PolicyEntry | not-accessible | current | entry for policy. |
| 1.3.6.1.4.1.2751.100.11.2.4.1.1 | Columnqos3PolicyMapIndex | read-only | current | the index of policy that you configured at qos3PolicyMapGroupTable |
| 1.3.6.1.4.1.2751.100.11.2.4.1.2 | Columnqos3PolicyClassMapName | read-only | current | Specify the classmap name.After a policy map is created, it can be associated to a class |
| 1.3.6.1.4.1.2751.100.11.2.4.1.3 | Columnqos3PolicyInsertClassMapName | read-write | current | Specify the position of classmap name |
| 1.3.6.1.4.1.2751.100.11.2.4.1.4 | Columnqos3PolicyType | read-write | current | pidAction means simple policy.colorAction and aggregateAction is Mutually exclusive,for example,if you want the pidAction and colorAction become effective,you … |
| 1.3.6.1.4.1.2751.100.11.2.4.1.5 | Columnqos3PolicyCIRKbps | read-write | current | CIR(Committed Information Rate) Kbits per second <1-10000000> |
| 1.3.6.1.4.1.2751.100.11.2.4.1.6 | Columnqos3PolicyCBSKbps | read-write | current | CBS(Committed Burst Size) Kbytes <1-1000000> |
| 1.3.6.1.4.1.2751.100.11.2.4.1.7 | Columnqos3PolicyPBSKbps | read-write | current | PBS(Peak Burst Size) Kbytes <1-1000000> |
| 1.3.6.1.4.1.2751.100.11.2.4.1.8 | Columnqos3PolicyPIRKbps | read-write | current | PIR(Peak Information Rate) Kbits per second <1-10000000> |
| 1.3.6.1.4.1.2751.100.11.2.4.1.9 | Columnqos3PolicyConformAction | read-write | current | Action when rate is not exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). |
| 1.3.6.1.4.1.2751.100.11.2.4.1.10 | Columnqos3PolicyconformSetCos | read-write | current | Set COS |
| 1.3.6.1.4.1.2751.100.11.2.4.1.11 | Columnqos3PolicyconformSetDscp | read-write | current | Change dscp |
| 1.3.6.1.4.1.2751.100.11.2.4.1.12 | Columnqos3PolicyconformSetPrec | read-write | current | Change precedence |
| 1.3.6.1.4.1.2751.100.11.2.4.1.13 | Columnqos3PolicyconformSetIntp | read-write | current | Set Internal priority |
| 1.3.6.1.4.1.2751.100.11.2.4.1.14 | Columnqos3PolicyconformSetDp | read-write | current | Set Drop priority |
| 1.3.6.1.4.1.2751.100.11.2.4.1.15 | Columnqos3PolicyExceedAction | read-write | current | Action when rate is exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). |
| 1.3.6.1.4.1.2751.100.11.2.4.1.16 | Columnqos3PolicyExceedSetCos | read-write | current | Set COS |
| 1.3.6.1.4.1.2751.100.11.2.4.1.17 | Columnqos3PolicyExceedSetDscp | read-write | current | Change dscp |
| 1.3.6.1.4.1.2751.100.11.2.4.1.18 | Columnqos3PolicyExceedSetPrec | read-write | current | Change precedence |
| 1.3.6.1.4.1.2751.100.11.2.4.1.19 | Columnqos3PolicyExceedSetIntp | read-write | current | Set Internal priority |
| 1.3.6.1.4.1.2751.100.11.2.4.1.20 | Columnqos3PolicyExceedSetDp | read-write | current | Set Drop priority |
| 1.3.6.1.4.1.2751.100.11.2.4.1.21 | Columnqos3PolicyViolateAction | read-write | current | Action when rate is violated,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). |
| 1.3.6.1.4.1.2751.100.11.2.4.1.22 | Columnqos3PolicyViolateSetCos | read-write | current | Set COS |
| 1.3.6.1.4.1.2751.100.11.2.4.1.23 | Columnqos3PolicyViolateSetDscp | read-write | current | Change dscp |
| 1.3.6.1.4.1.2751.100.11.2.4.1.24 | Columnqos3PolicyViolateSetPrec | read-write | current | Change precedence |
| 1.3.6.1.4.1.2751.100.11.2.4.1.25 | Columnqos3PolicyViolateSetIntp | read-write | current | Set Internal priority |
| 1.3.6.1.4.1.2751.100.11.2.4.1.26 | Columnqos3PolicyViolateSetDp | read-write | current | Set Drop priority |
| 1.3.6.1.4.1.2751.100.11.2.4.1.27 | Columnqos3PolicyAggregatePolicer | read-write | current | the name of aggregate policy |
| 1.3.6.1.4.1.2751.100.11.2.4.1.28 | Columnqos3PolicyAccounting | read-write | current | enable the Counter statistics or not. |
| 1.3.6.1.4.1.2751.100.11.2.4.1.29 | Columnqos3PolicyPidAction | read-write | current | simple policy action,for example: if you want to config cos(0) and setSTpid(10),you must set 8020 (1000 0000 0010 0000). some network Management Software offer… |
| 1.3.6.1.4.1.2751.100.11.2.4.1.30 | Columnqos3SetCos | read-write | current | set cos |
| 1.3.6.1.4.1.2751.100.11.2.4.1.31 | Columnqos3SetIpDscp | read-write | current | change dscp |
| 1.3.6.1.4.1.2751.100.11.2.4.1.32 | Columnqos3SetIpPrec | read-write | current | change precedence |
| 1.3.6.1.4.1.2751.100.11.2.4.1.33 | Columnqos3SetIntp | read-write | current | Set Internal priority |
| 1.3.6.1.4.1.2751.100.11.2.4.1.34 | Columnqos3SetDp | read-write | current | Set Drop priority |
| 1.3.6.1.4.1.2751.100.11.2.4.1.35 | Columnqos3SetCVid | read-write | current | set vlan id of inner VLAN tag. |
| 1.3.6.1.4.1.2751.100.11.2.4.1.36 | Columnqos3SetSVid | read-write | current | set vlan id of outer VLAN tag. |
| 1.3.6.1.4.1.2751.100.11.2.4.1.37 | Columnqos3SetSTpid | read-write | current | Set S-tpid |
| 1.3.6.1.4.1.2751.100.11.2.4.1.38 | Columnqos3AddSVid | read-write | current | add vlan id of outer VLAN tag |
| 1.3.6.1.4.1.2751.100.11.2.4.1.39 | Columnqos3DelCVid | read-only | current | delete vlan id of inner VLAN tag. |
| 1.3.6.1.4.1.2751.100.11.2.4.1.40 | Columnqos3SetTunnelId | read-write | current | |
| 1.3.6.1.4.1.2751.100.11.2.4.1.41 | Columnqos3SetIpDefaultPBR | read-write | current | whether add Default routing of ip type. |
| 1.3.6.1.4.1.2751.100.11.2.4.1.42 | Columnqos3SetIpVrf | read-write | current | set the vrf of ip type |
| 1.3.6.1.4.1.2751.100.11.2.4.1.43 | Columnqos3SetIpNextHop | read-write | current | set Nexthop IP address. |
| 1.3.6.1.4.1.2751.100.11.2.4.1.44 | Columnqos3SetExp | read-write | current | set exp. |
| 1.3.6.1.4.1.2751.100.11.2.4.1.45 | Columnqos3SetIpv6DefaultPBR | read-write | current | whether add Default routing of ipv6 type |
| 1.3.6.1.4.1.2751.100.11.2.4.1.46 | Columnqos3SetIpv6Vrf | read-write | current | set the vrf of ipv6 type. |
| 1.3.6.1.4.1.2751.100.11.2.4.1.47 | Columnqos3SetIpv6NextHop | read-write | current | set Nexthop IPv6 address |
| 1.3.6.1.4.1.2751.100.11.2.4.1.48 | Columnqos3PolicyStatus | read-write | current | the status of qos3PolicyTable. destroy(2) will put off the class-map,removeColorAct(3) will clear the color-act, removeAggregateAct(4) will clear the aggregate… |
| 1.3.6.1.4.1.2751.100.11.2.5 | Tableqos3PortTable | not-accessible | current | qos port configration. |
| 1.3.6.1.4.1.2751.100.11.2.5.1 | Rowqos3PortEntry | not-accessible | current | entry for port configuration of qos about trust,cos value,queue drop-algorithm and queue algorithm. |
| 1.3.6.1.4.1.2751.100.11.2.5.1.1 | Columnqos3PortIndex | read-only | current | port index. |
| 1.3.6.1.4.1.2751.100.11.2.5.1.2 | Columnqos3PortCos | read-write | current | set default cos of the port. |
| 1.3.6.1.4.1.2751.100.11.2.5.1.3 | Columnqos3PortTrust | read-write | current | set port trust. cosEnable,dscpEnable and expEnable can be set at the same time;cosDisable,dscpDisable and expDisbable can be set at the same time; cosEnable,ds… |
| 1.3.6.1.4.1.2751.100.11.2.5.1.4 | Columnqos3PortWredEnable | read-write | current | set the drop Algorithm of port's queue. |
| 1.3.6.1.4.1.2751.100.11.2.5.1.5 | Columnqos3PortQueueAlgorithm | read-write | current | effected the weight Algorithm of port's queue. |
| 1.3.6.1.4.1.2751.100.11.2.5.1.6 | Columnqos3PortPassThroughCos | read-write | current | forbid changing the value of cos. |
| 1.3.6.1.4.1.2751.100.11.2.5.1.7 | Columnqos3PortPassThroughDscp | read-write | current | forbid changing the value of dscp. |
| 1.3.6.1.4.1.2751.100.11.2.6 | Tableqos3QueueWeightTable | not-accessible | current | this table is used for configuring port's weight |
| 1.3.6.1.4.1.2751.100.11.2.6.1 | Rowqos3QueueWeightEntry | not-accessible | current | entry for queue weight configuration. |
| 1.3.6.1.4.1.2751.100.11.2.6.1.1 | Columnqos3QueueWeightPortIndex | read-only | current | port index. |
| 1.3.6.1.4.1.2751.100.11.2.6.1.2 | Columnqos3QueueWeightType | read-only | current | choose the algorithm weight that you want to set. |
| 1.3.6.1.4.1.2751.100.11.2.6.1.3 | Columnqos3QueueWeight0 | read-write | current | wrr default value is 1,wdrr default value is 10. |
| 1.3.6.1.4.1.2751.100.11.2.6.1.4 | Columnqos3QueueWeight1 | read-write | current | wrr default value is 2,wdrr default value is 20 |
| 1.3.6.1.4.1.2751.100.11.2.6.1.5 | Columnqos3QueueWeight2 | read-write | current | wrr default value is 3,wdrr default value is 40 |
| 1.3.6.1.4.1.2751.100.11.2.6.1.6 | Columnqos3QueueWeight3 | read-write | current | wrr default value is 4,wdrr default value is 80 |
| 1.3.6.1.4.1.2751.100.11.2.6.1.7 | Columnqos3QueueWeight4 | read-write | current | wrr default value is 5,wdrr default value is 160 |
| 1.3.6.1.4.1.2751.100.11.2.6.1.8 | Columnqos3QueueWeight5 | read-write | current | wrr default value is 6,wdrr default value is 320 |
| 1.3.6.1.4.1.2751.100.11.2.6.1.9 | Columnqos3QueueWeight6 | read-write | current | wrr default value is 7,wdrr default value is 640 |
| 1.3.6.1.4.1.2751.100.11.2.6.1.10 | Columnqos3QueueWeight7 | read-write | current | wrr default value is 8,wdrr default value is 1280 |
| 1.3.6.1.4.1.2751.100.11.2.6.1.11 | Columnqos3QueueWeightStatus | read-write | current | the status of qos3QueueWeightTable. |
| 1.3.6.1.4.1.2751.100.11.2.7 | Tableqos3QueueBindWidthTable | not-accessible | current | this table is used for setting bindwidth of port. |
| 1.3.6.1.4.1.2751.100.11.2.7.1 | Rowqos3QueueBindWidthEntry | not-accessible | current | entry for Queue BindWidth configuration. |
| 1.3.6.1.4.1.2751.100.11.2.7.1.1 | Columnqos3QueueBindWidthPortIndex | read-only | current | port index. |
| 1.3.6.1.4.1.2751.100.11.2.7.1.2 | Columnqos3QueueBindWidthQueueId | read-only | current | queue id |
| 1.3.6.1.4.1.2751.100.11.2.7.1.3 | Columnqos3QueueBindWidthMin | read-write | current | the Smallest bindwidth. |
| 1.3.6.1.4.1.2751.100.11.2.7.1.4 | Columnqos3QueueBindWidthMax | read-write | current | the Largest bindwidth. |
| 1.3.6.1.4.1.2751.100.11.2.7.1.5 | Columnqos3QueueBindWidthStatus | read-write | current | the status of qos3QueueBindWidthTable |
| 1.3.6.1.4.1.2751.100.11.2.8 | Tableqos3QueueWredTable | not-accessible | current | this table is used for configuring the drop Algorithm of queue |
| 1.3.6.1.4.1.2751.100.11.2.8.1 | Rowqos3QueueWredEntry | not-accessible | current | entry for queue wred configuration. |
| 1.3.6.1.4.1.2751.100.11.2.8.1.1 | Columnqos3QueueWredPortIndex | read-only | current | port index. |
| 1.3.6.1.4.1.2751.100.11.2.8.1.2 | Columnqos3QueueWredQueueId | read-only | current | queue id. |
| 1.3.6.1.4.1.2751.100.11.2.8.1.3 | Columnqos3QueueWredDp | read-only | current | drop Priority. |
| 1.3.6.1.4.1.2751.100.11.2.8.1.4 | Columnqos3QueueWredDpStart | read-write | current | the smallist queue length when the queue start Discard packet. |
| 1.3.6.1.4.1.2751.100.11.2.8.1.5 | Columnqos3QueueWredDpEnd | read-write | current | the Largest queue length when the queue start Discard packet |
| 1.3.6.1.4.1.2751.100.11.2.8.1.6 | Columnqos3QueueWredDpMaxRate | read-write | current | the max Discard Probability |
| 1.3.6.1.4.1.2751.100.11.2.8.1.7 | Columnqos3QueueWredStatus | read-write | current | the status of qos3QueueWredEntry |
| 1.3.6.1.4.1.2751.100.11.2.9 | Tableqos3MapTable | not-accessible | current | this table is used for setting map between priorities(eg:cos,intp). |
| 1.3.6.1.4.1.2751.100.11.2.9.1 | Rowqos3MapEntry | not-accessible | current | entry for mls qos map configuration. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.1 | Columnqos3MapType | read-only | current | the type of map,if the range of intp value beyonds 0-7,please config it in qos3MapIntpExtendTable. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.2 | Columnqos3MapAtoB1 | read-write | current | according to maptype,map a to b for the first value. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.3 | Columnqos3MapAtoB2 | read-write | current | according to maptype,map a to b for the second value. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.4 | Columnqos3MapAtoB3 | read-write | current | according to maptype,map a to b for the third value. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.5 | Columnqos3MapAtoB4 | read-write | current | according to maptype,map a to b for the fourth value. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.6 | Columnqos3MapAtoB5 | read-write | current | according to maptype,map a to b for the fifth value. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.7 | Columnqos3MapAtoB6 | read-write | current | according to maptype,map a to b for the sixth value. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.8 | Columnqos3MapAtoB7 | read-write | current | according to maptype,map a to b for the seventh value. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.9 | Columnqos3MapAtoB8 | read-write | current | according to maptype,map a to b for the eighth value. |
| 1.3.6.1.4.1.2751.100.11.2.9.1.10 | Columnqos3MapStatus | read-write | current | the status of qos3MapTable |
| 1.3.6.1.4.1.2751.100.11.2.10 | Tableqos3MapDscpTable | not-accessible | current | this table is used for mapping between dscp and other priorities. |
| 1.3.6.1.4.1.2751.100.11.2.10.1 | Rowqos3MapDscpEntry | not-accessible | current | entry for mls qos dscp map configuration. |
| 1.3.6.1.4.1.2751.100.11.2.10.1.1 | Columnqos3MapDscpType | read-only | current | the type of map |
| 1.3.6.1.4.1.2751.100.11.2.10.1.2 | Columnqos3MapDscpIndex | read-only | current | the index of dscp |
| 1.3.6.1.4.1.2751.100.11.2.10.1.3 | Columnqos3MapDscpValue | read-write | current | the map value |
| 1.3.6.1.4.1.2751.100.11.2.10.1.4 | Columnqos3mapDscpStatus | read-write | current | the status of qos3MapDscpTable |
| 1.3.6.1.4.1.2751.100.11.2.11 | Tableqos3ServicePolicyTable | not-accessible | current | bind the policy to port or vlan. |
| 1.3.6.1.4.1.2751.100.11.2.11.1 | Rowqos3ServicePolicyEntry | not-accessible | current | entry for qos bind. |
| 1.3.6.1.4.1.2751.100.11.2.11.1.1 | Columnqos3ServicePolicyBindType | read-only | current | bind the policy to port or vlan |
| 1.3.6.1.4.1.2751.100.11.2.11.1.2 | Columnqos3ServicePolicyIndex | read-only | current | port index or vlan id |
| 1.3.6.1.4.1.2751.100.11.2.11.1.3 | Columnqos3ServicePolicyDirection | read-only | current | the direction of binding |
| 1.3.6.1.4.1.2751.100.11.2.11.1.4 | Columnqos3ServicePolicyName | read-write | current | the policy name |
| 1.3.6.1.4.1.2751.100.11.2.11.1.5 | Columnqos3SercivePolicyStatus | read-write | current | the status of qos3ServicePolicyTable |
| 1.3.6.1.4.1.2751.100.11.2.12 | Tableqos3StatisticClearTable | not-accessible | current | this table is used for clearing counter statistics |
| 1.3.6.1.4.1.2751.100.11.2.12.1 | Rowqos3StatisticClearEntry | not-accessible | current | entry for clear statistics of vlan or port. |
| 1.3.6.1.4.1.2751.100.11.2.12.1.1 | Columnqos3StatisticClearBindType | read-only | current | bind to port or vlan |
| 1.3.6.1.4.1.2751.100.11.2.12.1.2 | Columnqos3StatisticClearIndex | read-only | current | port index or vlan id |
| 1.3.6.1.4.1.2751.100.11.2.12.1.3 | Columnqos3StatisticClearDirection | read-only | current | the direction that you want to clear |
| 1.3.6.1.4.1.2751.100.11.2.12.1.4 | Columnqos3StatisticClearStatus | read-write | current | the status of qos3StatisticClearTable |
| 1.3.6.1.4.1.2751.100.11.2.13 | Nodeqos3Ets | |||
| 1.3.6.1.4.1.2751.100.11.2.13.1 | Tableqos3EtsTable | not-accessible | current | this table is used for enabling QOS ETS and MC_UC mode. |
| 1.3.6.1.4.1.2751.100.11.2.13.1.1 | Rowqos3EtsEntry | not-accessible | current | entry for enabling ETS and MC_UC. |
| 1.3.6.1.4.1.2751.100.11.2.13.1.1.1 | Columnqos3EtsPortIndex | read-only | current | port index |
| 1.3.6.1.4.1.2751.100.11.2.13.1.1.2 | Columnqos3EtsScheduleStatusConfig | read-write | current | config schedule mode. |
| 1.3.6.1.4.1.2751.100.11.2.13.1.1.3 | Columnqos3EtsStatus | read-write | current | the status of qos3EtsTable. |
| 1.3.6.1.4.1.2751.100.11.2.13.2 | Tableqos3McQueueBindWidthTable | not-accessible | current | a list of mc bindWidth configuration. |
| 1.3.6.1.4.1.2751.100.11.2.13.2.1 | Rowqos3McQueueBindWidthEntry | not-accessible | current | entry for configuring mc bindWidth. |
| 1.3.6.1.4.1.2751.100.11.2.13.2.1.1 | Columnqos3McQueueBindWidthPortIndex | read-only | current | port index |
| 1.3.6.1.4.1.2751.100.11.2.13.2.1.2 | Columnqos3McQueueID | read-only | current | queue index. |
| 1.3.6.1.4.1.2751.100.11.2.13.2.1.3 | Columnqos3McQueueBindWidthMin | read-write | current | minimize vaule of queue bindWidth |
| 1.3.6.1.4.1.2751.100.11.2.13.2.1.4 | Columnqos3McQueueBindWidthMax | read-write | current | maximize value of queue bindWidth. |
| 1.3.6.1.4.1.2751.100.11.2.13.2.1.5 | Columnqos3McQueueBindWidthStatus | read-write | current | the status of qos3McQueueBindWidthTable. |
| 1.3.6.1.4.1.2751.100.11.2.13.3 | Tableqos3SchedulePolicyMapTable | not-accessible | current | this table is used for building a Schedule policy and mapping the named policy to number, if you want to configure a Schedule policy,you must map at here. |
| 1.3.6.1.4.1.2751.100.11.2.13.3.1 | Rowqos3SchedulePolicyMapEntry | not-accessible | current | entry for building schedule policy. |
| 1.3.6.1.4.1.2751.100.11.2.13.3.1.1 | Columnqos3SchedulePolicyMapIndex | read-only | current | the range is 0-(2^64 - 1). |
| 1.3.6.1.4.1.2751.100.11.2.13.3.1.2 | Columnqos3SchedulePolicyName | read-write | current | the schedule policy name. |
| 1.3.6.1.4.1.2751.100.11.2.13.3.1.3 | Columnqos3SchedulePolicyStatus | read-write | current | the status of qos3SchedulePolicyGroupTable. |
| 1.3.6.1.4.1.2751.100.11.2.13.4 | Tableqos3NodeScheduleTable | not-accessible | current | this table is used for building a Schedule node. |
| 1.3.6.1.4.1.2751.100.11.2.13.4.1 | Rowqos3NodeScheduleEntry | not-accessible | current | entry for building schedule policy. |
| 1.3.6.1.4.1.2751.100.11.2.13.4.1.1 | Columnqos3NodeSchedulePolicyIndex | read-only | current | policy index. |
| 1.3.6.1.4.1.2751.100.11.2.13.4.1.2 | Columnqos3NodeScheduleLevelID | read-only | current | level ID. |
| 1.3.6.1.4.1.2751.100.11.2.13.4.1.3 | Columnqos3NodeScheduleNodeID | read-only | current | node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4. |
| 1.3.6.1.4.1.2751.100.11.2.13.4.1.4 | Columnqos3NodeScheduleStatus | read-write | current | the status of qos3NodeScheduleTable. |
| 1.3.6.1.4.1.2751.100.11.2.13.5 | Tableqos3ScheduleQueueAlgorithmTable | not-accessible | current | this table is used for schedule queue algorithm configuration. |
| 1.3.6.1.4.1.2751.100.11.2.13.5.1 | Rowqos3ScheduleQueueAlgorithmEntry | not-accessible | current | entry for configuring schedule queue algorithm. |
| 1.3.6.1.4.1.2751.100.11.2.13.5.1.1 | Columnqos3ScheduleQueueAlgorithmPolicyIndex | read-only | current | schedule policy map Index. |
| 1.3.6.1.4.1.2751.100.11.2.13.5.1.2 | Columnqos3ScheduleQueueAlgorithmLevelID | read-only | current | level ID. |
| 1.3.6.1.4.1.2751.100.11.2.13.5.1.3 | Columnqos3ScheduleQueueAlgorithmNodeID | read-only | current | node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4. |
| 1.3.6.1.4.1.2751.100.11.2.13.5.1.4 | Columnqos3ScheduleQueueAlgorithmConfig | read-write | current | schedule queue algorithm. |
| 1.3.6.1.4.1.2751.100.11.2.13.5.1.5 | Columnqos3ScheduleQueueAlgorithmStatus | read-write | current | the status of qos3ScheduleQueueAlgorithmTable. |
| 1.3.6.1.4.1.2751.100.11.2.13.6 | Tableqos3ScheduleQueueWeightTable | not-accessible | current | this table is used for schedule queue weight configuration. |
| 1.3.6.1.4.1.2751.100.11.2.13.6.1 | Rowqos3ScheduleQueueWeightEntry | not-accessible | current | entry for configuring schedule queue weight. |
| 1.3.6.1.4.1.2751.100.11.2.13.6.1.1 | Columnqos3ScheduleQueueWeightPolicyIndex | read-only | current | schedule policy map Index. |
| 1.3.6.1.4.1.2751.100.11.2.13.6.1.2 | Columnqos3ScheduleQueueWeightLevelID | read-only | current | level ID. |
| 1.3.6.1.4.1.2751.100.11.2.13.6.1.3 | Columnqos3ScheduleQueueWeightNodeID | read-only | current | node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4. |
| 1.3.6.1.4.1.2751.100.11.2.13.6.1.4 | Columnqos3ScheduleQueueAlgorithm | read-only | current | queue algorithm. |
| 1.3.6.1.4.1.2751.100.11.2.13.6.1.5 | Columnqos3ScheduleQueueWeightQueueID | read-only | current | queue ID. |
| 1.3.6.1.4.1.2751.100.11.2.13.6.1.6 | Columnqos3ScheduleQueueWeightValue | read-write | current | queue weight value. |
| 1.3.6.1.4.1.2751.100.11.2.13.6.1.7 | Columnqos3ScheduleQueueWeightStatus | read-write | current | the status of qos3ScheduleQueueWeightTable. |
| 1.3.6.1.4.1.2751.100.11.2.13.7 | Tableqos3ScheduleQueueInputTable | not-accessible | current | this table is used for schedule queue input configuration. |
| 1.3.6.1.4.1.2751.100.11.2.13.7.1 | Rowqos3ScheduleQueueInputEntry | not-accessible | current | entry for configuring schedule queue input. |
| 1.3.6.1.4.1.2751.100.11.2.13.7.1.1 | Columnqos3ScheduleQueueInputPolicyIndex | read-only | current | schedule policy map Index. |
| 1.3.6.1.4.1.2751.100.11.2.13.7.1.2 | Columnqos3ScheduleQueueInputLevelID | read-only | current | level ID. |
| 1.3.6.1.4.1.2751.100.11.2.13.7.1.3 | Columnqos3ScheduleQueueInputNodeID | read-only | current | node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4. |
| 1.3.6.1.4.1.2751.100.11.2.13.7.1.4 | Columnqos3ScheduleQueueInputQueueID | read-only | current | queue ID. |
| 1.3.6.1.4.1.2751.100.11.2.13.7.1.5 | Columnqos3ScheduleQueueInputType | read-write | current | input type of queue. |
| 1.3.6.1.4.1.2751.100.11.2.13.7.1.6 | Columnqos3ScheduleQueueInputTypeValue | read-write | current | value of the input type,the value range for uc is 1-18,the value range for mc is 1-4,the value range for node is 1-4. |
| 1.3.6.1.4.1.2751.100.11.2.13.7.1.7 | Columnqos3ScheduleQueueInputStatus | read-write | current | the status of qos3ScheduleBindWidthTable. |
| 1.3.6.1.4.1.2751.100.11.2.13.8 | Tableqos3ScheduleBindWidthTable | not-accessible | current | this table is used for schedule bindWidth configuration. |
| 1.3.6.1.4.1.2751.100.11.2.13.8.1 | Rowqos3ScheduleBindWidthEntry | not-accessible | current | entry for configuring schedule bindWidth. |
| 1.3.6.1.4.1.2751.100.11.2.13.8.1.1 | Columnqos3ScheduleBindWidthPolicyIndex | read-only | current | schedule policy map Index. |
| 1.3.6.1.4.1.2751.100.11.2.13.8.1.2 | Columnqos3ScheduleBindWidthLevelID | read-only | current | level ID. |
| 1.3.6.1.4.1.2751.100.11.2.13.8.1.3 | Columnqos3ScheduleBindWidthNodeID | read-only | current | node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4. |
| 1.3.6.1.4.1.2751.100.11.2.13.8.1.4 | Columnqos3ScheduleBindWidthMin | read-write | current | minimize value of schedule bindWidth. |
| 1.3.6.1.4.1.2751.100.11.2.13.8.1.5 | Columnqos3ScheduleBindWidthMax | read-write | current | maximize value of schedule bindWidth. |
| 1.3.6.1.4.1.2751.100.11.2.13.8.1.6 | Columnqos3ScheduleBindWidthStatus | read-write | current | the status of qos3ScheduleBindWidthTable. |
| 1.3.6.1.4.1.2751.100.11.2.13.9 | Tableqos3SchedulePolicyBindTable | not-accessible | current | this table is used for binding schedule policy to port. |
| 1.3.6.1.4.1.2751.100.11.2.13.9.1 | Rowqos3SchedulePolicyBindEntry | not-accessible | current | entry for binding schedule policy. |
| 1.3.6.1.4.1.2751.100.11.2.13.9.1.1 | Columnqos3SchedulePolicyBindPortIndex | read-only | current | port Index. |
| 1.3.6.1.4.1.2751.100.11.2.13.9.1.2 | Columnqos3SchedulePolicyBindPolicyName | read-write | current | the schedule policy name. |
| 1.3.6.1.4.1.2751.100.11.2.13.9.1.3 | Columnqos3SchedulePolicyBindStatus | read-write | current | the status of qos3SchedulePolicyBindTable. |
| 1.3.6.1.4.1.2751.100.11.2.14 | Tableqos3MapIntpExtendTable | not-accessible | current | this table is used for mapping between intp and other priorities,the range of value for intp is 0-119. |
| 1.3.6.1.4.1.2751.100.11.2.14.1 | Rowqos3MapIntpExtendEntry | not-accessible | current | entry for mls qos intp map configuration. |
| 1.3.6.1.4.1.2751.100.11.2.14.1.1 | Columnqos3MapIntpExtendType | read-only | current | the type of map |
| 1.3.6.1.4.1.2751.100.11.2.14.1.2 | Columnqos3MapIntpExtendIndex | read-only | current | the index of intp |
| 1.3.6.1.4.1.2751.100.11.2.14.1.3 | Columnqos3MapIntpExtendValue | read-write | current | the map value |
| 1.3.6.1.4.1.2751.100.11.2.14.1.4 | Columnqos3mapIntpExtendStatus | read-write | current | the status of qos3MapIntpExtendTable |
| 1.3.6.1.4.1.2751.100.11.2.15 | Nodeqos3EgressRemark | |||
| 1.3.6.1.4.1.2751.100.11.2.15.1 | Scalarqos3EgressGreenRemark | read-write | current | enabling egress remark on green packet. |
| 1.3.6.1.4.1.2751.100.12 | Nodeprimirror | |||
| 1.3.6.1.4.1.2751.100.12.1 | TablemirrorDestTable | not-accessible | current | Destination port for mirrored packets. |
| 1.3.6.1.4.1.2751.100.12.1.1 | RowmirrorDestEntry | not-accessible | current | Destination port for mirrored packets. |
| 1.3.6.1.4.1.2751.100.12.1.1.1 | ColumnmirrorDestSession | read-only | current | Session ID. |
| 1.3.6.1.4.1.2751.100.12.1.1.2 | ColumnmirrorDestPort | read-create | current | mirror destination port eg:Ethernet1/1. |
| 1.3.6.1.4.1.2751.100.12.1.1.3 | ColumnmirrorDestStatus | read-create | current | Status. |
| 1.3.6.1.4.1.2751.100.12.2 | TablemirrorSrcPortTable | not-accessible | current | Src port for mirrored packets. |
| 1.3.6.1.4.1.2751.100.12.2.1 | RowmirrorSrcPortEntry | not-accessible | current | Src port for mirrored packets. |
| 1.3.6.1.4.1.2751.100.12.2.1.1 | ColumnmirrorSrcPortSession | read-only | current | Session ID. |
| 1.3.6.1.4.1.2751.100.12.2.1.2 | ColumnmirrorSrcPortDirect | read-only | current | Direction of mirror. |
| 1.3.6.1.4.1.2751.100.12.2.1.3 | ColumnmirrorSrcPort | read-create | current | mirror source port. eg:Ethernet1/1. |
| 1.3.6.1.4.1.2751.100.12.2.1.4 | ColumnmirrorSrcPortStatus | read-create | current | Status. |
| 1.3.6.1.4.1.2751.100.12.3 | TablemirrorSrcCpuTable | not-accessible | current | Src Cpu for mirrored packets. |
| 1.3.6.1.4.1.2751.100.12.3.1 | RowmirrorSrcCpuEntry | not-accessible | current | Src Cpu for mirrored packets. |
| 1.3.6.1.4.1.2751.100.12.3.1.1 | ColumnmirrorSrcCpuSession | read-only | current | Session ID. |
| 1.3.6.1.4.1.2751.100.12.3.1.2 | ColumnmirrorSrcCpuDirect | read-only | current | Direction of mirror. |
| 1.3.6.1.4.1.2751.100.12.3.1.3 | ColumnmirrorSrcCpuSlot | read-only | current | Src cpu slot index. |
| 1.3.6.1.4.1.2751.100.12.3.1.4 | ColumnmirrorSrcCpuStatus | read-create | current | Status. |
| 1.3.6.1.4.1.2751.100.12.4 | TablemirrorReflectorPortTable | not-accessible | current | mirror reflector destination port configuration Table of Rspan. The information about the reflector destination port and its associated session will be specifi… |
| 1.3.6.1.4.1.2751.100.12.4.1 | RowmirrorReflectorPortEntry | not-accessible | current | mirror destination port configuration of Rspan. |
| 1.3.6.1.4.1.2751.100.12.4.1.1 | ColumnmirrorReflectorPortSession | read-only | current | Session ID. |
| 1.3.6.1.4.1.2751.100.12.4.1.2 | ColumnmirrorReflectorPort | read-only | current | mirror reflector destination port number. |
| 1.3.6.1.4.1.2751.100.12.4.1.3 | ColumnmirrorReflectorPortStatus | read-create | current | The configuration status of the reflector destination port and its associated session. |
| 1.3.6.1.4.1.2751.100.12.5 | TablemirrorRspanVlanTable | not-accessible | current | Vlan configuration Table of Rspan. |
| 1.3.6.1.4.1.2751.100.12.5.1 | RowmirrorRspanVlanEntry | not-accessible | current | Vlan configuration of Rspan. |
| 1.3.6.1.4.1.2751.100.12.5.1.1 | ColumnmirrorRspanVlan | read-only | current | Vlan ID. |
| 1.3.6.1.4.1.2751.100.12.5.1.2 | ColumnmirrorRspanVlanStatus | read-create | current | Vlan status. |
| 1.3.6.1.4.1.2751.100.12.6 | TablemirrorRspanSessionTable | not-accessible | current | Session configuration Table of Rspan.When creating an entry, the correctness of both the Vlan ID an the Session ID should be ensured. When destroying an entry,… |
| 1.3.6.1.4.1.2751.100.12.6.1 | RowmirrorRspanSessionEntry | not-accessible | current | Session configuration of Rspan. |
| 1.3.6.1.4.1.2751.100.12.6.1.1 | ColumnmirrorRspanSession | read-only | current | Session ID. |
| 1.3.6.1.4.1.2751.100.12.6.1.2 | ColumnmirrorRspanSessionVlan | read-only | current | Vlan ID. |
| 1.3.6.1.4.1.2751.100.12.6.1.3 | ColumnmirrorRspanSessionStatus | read-create | current | The configuration status of the mirror session and its associated Rspan Vlan. |
| 1.3.6.1.4.1.2751.100.12.7 | TablemirrorDestGreTable | not-accessible | current | Destination port for mirrored packets. |
| 1.3.6.1.4.1.2751.100.12.7.1 | RowmirrorDestGreEntry | not-accessible | current | Destination port for mirrored packets. |
| 1.3.6.1.4.1.2751.100.12.7.1.1 | ColumnmirrorDestGreSession | read-only | current | Session ID. |
| 1.3.6.1.4.1.2751.100.12.7.1.2 | ColumnmirrorDestGrePort | read-only | current | configure GRE port index. |
| 1.3.6.1.4.1.2751.100.12.7.1.3 | ColumnmirrorDestMacAddr | read-create | current | MAC address of equipment contacted with destination inferface. |
| 1.3.6.1.4.1.2751.100.12.7.1.4 | ColumnmirrorDestIP | read-create | current | GRE destination IP address. |
| 1.3.6.1.4.1.2751.100.12.7.1.5 | ColumnmirrorSrcIP | read-create | current | GRE source IP address. |
| 1.3.6.1.4.1.2751.100.12.7.1.6 | ColumnmirrorDestGreStatus | read-create | current | Status. |
| 1.3.6.1.4.1.2751.100.13 | Nodepridhcp | |||
| 1.3.6.1.4.1.2751.100.13.1 | NodedhcpRelay | |||
| 1.3.6.1.4.1.2751.100.13.1.1 | ScalardhcpRelayForwardUdpBootps | read-create | current | If dhcp rely forward bootps udp broadcast packet,broadcast message bootps. |
| 1.3.6.1.4.1.2751.100.13.1.2 | TabledhcpRelayServerAddrTable | not-accessible | current | The role of DHCP Relay Agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP Relay service us… |
| 1.3.6.1.4.1.2751.100.13.1.2.1 | RowdhcpRelayServerAddrEntry | not-accessible | current | A conceptual row of dhcpRelayServerAddrTable. |
| 1.3.6.1.4.1.2751.100.13.1.2.1.1 | ColumndhcpRelayServerAddrVlanId | not-accessible | current | The ID of VLAN interface used by this table entry. |
| 1.3.6.1.4.1.2751.100.13.1.2.1.2 | ColumndhcpRelayServerAddrIndex | not-accessible | current | The index of relay address set in the VLAN interface. |
| 1.3.6.1.4.1.2751.100.13.1.2.1.3 | ColumndhcpRelayServerAddrServerIp | read-write | current | Appoint the destination address used for DHCP relay. |
| 1.3.6.1.4.1.2751.100.13.1.2.1.4 | ColumndhcpRelayServerAddrStatus | read-write | current | Configuration status. |
| 1.3.6.1.4.1.2751.100.13.1.3 | ScalardhcpRelayOption82Enalbe | read-create | current | If set(0), disable dhcp relay option82 function, set(1),then enable dhcp relay option82 function. |
| 1.3.6.1.4.1.2751.100.13.1.4 | ScalardhcpRelayInformationOptionRemoteIDFormat | read-create | current | If set(0), then use vlan mac address as the default format, set(1), use vs-hp format to keep compatibility with HP. |
| 1.3.6.1.4.1.2751.100.13.1.5 | ScalardhcpRelayInformationOptionRemoteID | read-create | current | If input the 'standard' string ,then use vlan mac address format for option82 sub-option 2, other strings are used as romote ID of option82 sub-option 2, the d… |
| 1.3.6.1.4.1.2751.100.13.1.6 | ScalardhcpRelayInformationOptionSubscriberIDFormat | read-create | current | If set(0), then use hex format of vlan and mac address, set(1), use ACSII format of vlan and mac address, set(2), use vs-hp format to keep compatibility with H… |
| 1.3.6.1.4.1.2751.100.13.1.7 | ScalardhcpServerRelayInformationEnable | read-create | current | If set(0), disable the option82 relay function on dhcp server, the dhcp server neglects the option82 information, set(1), then enable the option82 relay functi… |
| 1.3.6.1.4.1.2751.100.13.1.8 | ScalardhcpRelayInformationOptionDelimiter | read-create | current | If set(0), then use colon to compart sub-option parameters, set(1), use dot to compart sub-option parameters, set(2), use slash to compart sub-option parameter… |
| 1.3.6.1.4.1.2751.100.13.1.9 | ScalardhcpRelayOptionSelfDefinedSubscriberIDFormat | read-create | current | If set(0), then use hex format to generate sub-scriber ID, set(1), use ASCII format to generate sub-scriber ID, the default value is set(1). |
| 1.3.6.1.4.1.2751.100.13.1.10 | ScalardhcpRelayOptionSelfDefinedRemoteIDFormat | read-create | current | If set(0), then use hex format to generate remote ID, set(1), use ASCII format to generate remote ID, the default value is set(1). |
| 1.3.6.1.4.1.2751.100.13.1.11 | ScalardhcpRelayOptionSelfDefinedSubscriberID | read-create | current | If user does not configure the circuit-id of option82 explicitly on a port, then the user can self define format to generate the circuit-id, the format options… |
| 1.3.6.1.4.1.2751.100.13.1.12 | ScalardhcpRelayOptionSelfDefinedRemoteID | read-create | current | If user does not configure the remote-id of option82 explicitly on a port, then the user can self define format to generate the remote-id, the format options i… |
| 1.3.6.1.4.1.2751.100.13.1.13 | TabledhcpRelayOption82InterfaceConfigureTable | not-accessible | current | After enable the option82 relay function ,the swith must adopt some forwarding policy, and use specified format for subscriber ID to handle receving the dhcp r… |
| 1.3.6.1.4.1.2751.100.13.1.13.1 | RowdhcpRelayOption82InterfaceConfigureEntry | not-accessible | current | A conceptual row of dhcpRelayOption82InterfaceConfigureTable. |
| 1.3.6.1.4.1.2751.100.13.1.13.1.1 | ColumndhcpRelayOption82Vid | not-accessible | current | The Vlan interface being used by this table entry. Only the Vlan interfaces which have an IP configured will appear in the table. |
| 1.3.6.1.4.1.2751.100.13.1.13.1.2 | ColumndhcpRelayOption82ForwardPolicy | read-write | current | If set(1), then drop the dhcp request packets with option82 sub-option, set(2), keep the dhcp request packets with option82 sub-option and forward to the dhcp … |
| 1.3.6.1.4.1.2751.100.13.1.13.1.3 | ColumndhcpRelayOption82SubscriberID | read-write | current | If input the 'standard' string ,then use vlan and physical port format for option82 sub-option 1, other string, that be used as circuit-id of option82 sub-opti… |
| 1.3.6.1.4.1.2751.100.13.2 | NodedhcpServer | |||
| 1.3.6.1.4.1.2751.100.13.2.1 | ScalardhcpServerServiceStatus | read-create | current | Setting this to 1 to enable the dhcp server service. Setting this to 2 to disable the dhcp server service. |
| 1.3.6.1.4.1.2751.100.13.2.2 | ScalardhcploggingStatus | read-create | current | Setting this to 1 to enable the dhcp conflict logging. Setting this to 0 to disable the dhcp conflict logging. |
| 1.3.6.1.4.1.2751.100.13.2.3 | NodedhcpPool | |||
| 1.3.6.1.4.1.2751.100.13.2.3.1 | TabledhcpPoolTable | not-accessible | current | A dhcp pool is a collection of user configuration such as option config-lease time or dns-server IPs, a network address for network pool, or a host IP plus a h… |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1 | RowdhcpPoolEntry | not-accessible | current | A conceptual row of dhcpPoolTable. |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1.1 | ColumndhcpPoolPoolName | not-accessible | current | PoolName, simply specify a string. |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1.2 | ColumndhcpPoolStatus | read-create | current | accession delete the pool,according to dhcpPoolName |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1.3 | ColumndhcpPoolAddressType | read-create | current | configure dhcppool of address style |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1.4 | ColumndhcpPoolAddress | read-create | current | configurate dhcp pool. if dhcpPoolAddressType=1 configurate address range, if dhcpPoolAddressType=2 configurate single address |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1.5 | ColumndhcpPoolAddressPrefix | read-create | current | dhcp pool ip address prefix |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1.6 | ColumndhcpPoolAddressStatus | read-create | current | address of configuration satus |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1.7 | ColumndhcpPoolMacAddress | read-create | current | appoint user of hardware address.Condition: dhcpPoolAddressType(2). |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1.8 | ColumndhcpPoolProType | read-create | current | RFC define protocol style of number express,Condition:dhcpPoolAddressType(2). |
| 1.3.6.1.4.1.2751.100.13.2.3.1.1.9 | ColumndhcpPoolMacStatus | read-create | current | hardware address configure status.Condition: dhcpPoolAddressType(2). |
| 1.3.6.1.4.1.2751.100.13.2.3.2 | TabledhcpPoolExpandTable | not-accessible | current | A dhcp pool is a collection of user configuration such as option config-lease time or dns-server IPs, a network address for network pool, or a host IP plus a h… |
| 1.3.6.1.4.1.2751.100.13.2.3.2.1 | RowdhcpPoolExpandEntry | not-accessible | current | A conceptual row of dhcpPoolExpandTable. |
| 1.3.6.1.4.1.2751.100.13.2.3.2.1.1 | ColumndhcpPoolExpandName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.2751.100.13.2.3.2.1.2 | ColumndhcpPoolNetbiosNodeType | read-create | current | Configure DHCP client of node style. For example, Broadcast node 1, Peer-to-peer node 2, Mixed node 4, Hybrid node 8 |
| 1.3.6.1.4.1.2751.100.13.2.3.2.1.3 | ColumndhcpPoolDomainName | read-create | current | DHCP client configure domain name |
| 1.3.6.1.4.1.2751.100.13.2.3.2.1.4 | ColumndhcpPoolBootFile | read-create | current | configure DHCP client boot-file name |
| 1.3.6.1.4.1.2751.100.13.2.3.2.1.5 | ColumndhcpPoolCLid | read-create | current | set dhcp pool client id. Condition: the pool of address is handcraft bind |
| 1.3.6.1.4.1.2751.100.13.2.3.2.1.7 | ColumndhcpPoolExpandstatus | read-create | current | if configure is valid(0),and the list of all configuration operatation accession if configure is destroy(1),and the list of all configuration operation delet |
| 1.3.6.1.4.1.2751.100.13.2.4 | TabledhcpLeaseTimeTable | not-accessible | current | configure rent term in address pool |
| 1.3.6.1.4.1.2751.100.13.2.4.1 | RowdhcpLeaseTimeEntry | not-accessible | current | configure rent term in address pool |
| 1.3.6.1.4.1.2751.100.13.2.4.1.1 | ColumndhcpLeaseTimePoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.2751.100.13.2.4.1.2 | ColumndhcpLeaseTimeType | read-create | current | rent time style,0 is temporarily rent,1 is forever rent |
| 1.3.6.1.4.1.2751.100.13.2.4.1.3 | ColumndhcpLeaseTimeDay | read-create | current | day,condition:dhcpLeaseTimeType=temp(0). |
| 1.3.6.1.4.1.2751.100.13.2.4.1.4 | ColumndhcpLeaseTimeHours | read-create | current | hour,condition:dhcpLeaseTimeType=temp(0). |
| 1.3.6.1.4.1.2751.100.13.2.4.1.5 | ColumndhcpLeaseTimeMinutes | read-create | current | hour,condition:dhcpLeaseTimeType=temp(0). |
| 1.3.6.1.4.1.2751.100.13.2.4.1.6 | ColumndhcpLeaseTimeStatus | read-create | current | Setting this to active(1) creates an entry. Setting this to destroy(2) destroys an entry. default status is 0,no opperation |
| 1.3.6.1.4.1.2751.100.13.2.5 | TabledhcpPoolOptionTable | not-accessible | current | configure pool of optional parameters |
| 1.3.6.1.4.1.2751.100.13.2.5.1 | RowdhcpPoolOptionEntry | not-accessible | current | configure pool of optional parameters |
| 1.3.6.1.4.1.2751.100.13.2.5.1.1 | ColumndhcpPoolOptionName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.2751.100.13.2.5.1.2 | ColumndhcpPoolOptionIndex | not-accessible | current | The index of option which has been set in this pool |
| 1.3.6.1.4.1.2751.100.13.2.5.1.3 | ColumndhcpPoolOptionId | read-create | current | dhcpPoolOptionId (0..254) |
| 1.3.6.1.4.1.2751.100.13.2.5.1.4 | ColumndhcpPoolOptionType | read-create | current | dhcpPoolOptionType |
| 1.3.6.1.4.1.2751.100.13.2.5.1.5 | ColumndhcpPoolOption | read-create | current | if dhcpPoolOptionType=1, ASCII string if dhcpPoolOptionType=2, HEX string if dhcpPoolOptionType=3,IP address |
| 1.3.6.1.4.1.2751.100.13.2.5.1.6 | ColumndhcpPoolOptionStatus | read-create | current | optional parameters configure status |
| 1.3.6.1.4.1.2751.100.13.2.6 | TabledhcpServerExcludedIpAddrTable | not-accessible | current | dhcpServer Excluded IpAddr Table |
| 1.3.6.1.4.1.2751.100.13.2.6.1 | RowdhcpServerExcludedIpAddrEntry | not-accessible | current | dhcpServer Excluded IpAddrEntry |
| 1.3.6.1.4.1.2751.100.13.2.6.1.1 | ColumndhcpServerExcludedIpAddrLowIp | not-accessible | current | The excluded IP address, or first IP address in an excluded address range. |
| 1.3.6.1.4.1.2751.100.13.2.6.1.2 | ColumndhcpServerExcludedIpAddrHiIp | not-accessible | current | The last IP address in the excluded address range. |
| 1.3.6.1.4.1.2751.100.13.2.6.1.3 | ColumndhcpServerExcludedIpAddrStatus | read-create | current | Setting this to active(1) creates an entry. Setting this to destroy(2) destroys an entry. |
| 1.3.6.1.4.1.2751.100.13.2.8 | TabledhcpPoolDnsSerTable | not-accessible | current | dhcpPool Dns Server Table:the maximum 8 dns is allowed the first dns server has the highest priority.so address1 is highest priority,next is address2,address3.… |
| 1.3.6.1.4.1.2751.100.13.2.8.1 | RowdhcpPoolDnsSerEntry | not-accessible | current | is DHCP client configure DNS server |
| 1.3.6.1.4.1.2751.100.13.2.8.1.1 | ColumndhcpPoolDnsSerPoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.2751.100.13.2.8.1.2 | ColumndhcpPoolDnsSerIpAddress1 | read-create | current | IP address,MUST. |
| 1.3.6.1.4.1.2751.100.13.2.8.1.3 | ColumndhcpPoolDnsSerIpAddress2 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.8.1.4 | ColumndhcpPoolDnsSerIpAddress3 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.8.1.5 | ColumndhcpPoolDnsSerIpAddress4 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.8.1.6 | ColumndhcpPoolDnsSerIpAddress5 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.8.1.7 | ColumndhcpPoolDnsSerIpAddress6 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.8.1.8 | ColumndhcpPoolDnsSerIpAddress7 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.8.1.9 | ColumndhcpPoolDnsSerIpAddress8 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.8.1.10 | ColumndhcpPoolDnsSerStatus | read-create | current | configure DNS server status |
| 1.3.6.1.4.1.2751.100.13.2.9 | TabledhcpPoolDefaultRouterTable | not-accessible | current | dhcpPoolDefaultRouterTable: the maximum 8 default gateway address can be set,the first gateway has the highest priority, So address1 has the highest priority,n… |
| 1.3.6.1.4.1.2751.100.13.2.9.1 | RowdhcpPoolDefaultRouterEntry | not-accessible | current | DHCP client machine configure default gateway |
| 1.3.6.1.4.1.2751.100.13.2.9.1.1 | ColumndhcpPoolDefaultRouterPoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.2751.100.13.2.9.1.2 | ColumndhcpPoolDefaultRouterIpAddress1 | read-create | current | IP address,must |
| 1.3.6.1.4.1.2751.100.13.2.9.1.3 | ColumndhcpPoolDefaultRouterIpAddress2 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.9.1.4 | ColumndhcpPoolDefaultRouterIpAddress3 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.9.1.5 | ColumndhcpPoolDefaultRouterIpAddress4 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.9.1.6 | ColumndhcpPoolDefaultRouterIpAddress5 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.9.1.7 | ColumndhcpPoolDefaultRouterIpAddress6 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.9.1.8 | ColumndhcpPoolDefaultRouterIpAddress7 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.9.1.9 | ColumndhcpPoolDefaultRouterIpAddress8 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.9.1.10 | ColumndhcpPoolDefaultRouterStatus | read-create | current | configure default gateway state machine |
| 1.3.6.1.4.1.2751.100.13.2.10 | TabledhcpPoolNextServerTable | not-accessible | current | dhcpPoolNextServerTable |
| 1.3.6.1.4.1.2751.100.13.2.10.1 | RowdhcpPoolNextServerEntry | not-accessible | current | dhcpPoolNextServerEntry |
| 1.3.6.1.4.1.2751.100.13.2.10.1.1 | ColumndhcpPoolNextServerPoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.2751.100.13.2.10.1.2 | ColumndhcpPoolNextServerIpAddress1 | read-create | current | IP address,must |
| 1.3.6.1.4.1.2751.100.13.2.10.1.3 | ColumndhcpPoolNextServerIpAddress2 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.10.1.4 | ColumndhcpPoolNextServerIpAddress3 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.10.1.5 | ColumndhcpPoolNextServerIpAddress4 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.10.1.6 | ColumndhcpPoolNextServerIpAddress5 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.10.1.7 | ColumndhcpPoolNextServerIpAddress6 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.10.1.8 | ColumndhcpPoolNextServerIpAddress7 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.10.1.9 | ColumndhcpPoolNextServerIpAddress8 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.10.1.10 | ColumndhcpPoolNextServerStatus | read-create | current | status machine |
| 1.3.6.1.4.1.2751.100.13.2.11 | TabledhcpPoolWinsTable | not-accessible | current | dhcpPoolWinsTable |
| 1.3.6.1.4.1.2751.100.13.2.11.1 | RowdhcpPoolWinsEntry | not-accessible | current | configure Wins sever address |
| 1.3.6.1.4.1.2751.100.13.2.11.1.1 | ColumndhcpPoolWinsPoolName | not-accessible | current | PoolName, simply specify a string which string size NO MORE THAN 8 |
| 1.3.6.1.4.1.2751.100.13.2.11.1.2 | ColumndhcpPoolWinsIpAddress1 | read-create | current | IP address,must |
| 1.3.6.1.4.1.2751.100.13.2.11.1.3 | ColumndhcpPoolWinsIpAddress2 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.11.1.4 | ColumndhcpPoolWinsIpAddress3 | read-create | current | IPaddress,option |
| 1.3.6.1.4.1.2751.100.13.2.11.1.5 | ColumndhcpPoolWinsIpAddress4 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.11.1.6 | ColumndhcpPoolWinsIpAddress5 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.11.1.7 | ColumndhcpPoolWinsIpAddress6 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.11.1.8 | ColumndhcpPoolWinsIpAddress7 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.11.1.9 | ColumndhcpPoolWinsIpAddress8 | read-create | current | IP address,option |
| 1.3.6.1.4.1.2751.100.13.2.11.1.10 | ColumndhcpPoolWinsStatus | read-create | current | configure wins server status machine |
| 1.3.6.1.4.1.2751.100.13.2.12 | TabledhcpServerLeaseBindingTable | not-accessible | current | express IP address and MAC address bind status |
| 1.3.6.1.4.1.2751.100.13.2.12.1 | RowdhcpServerLeaseBindingEntry | not-accessible | current | express IP address and MAC address bind status |
| 1.3.6.1.4.1.2751.100.13.2.12.1.1 | ColumndhcpServerLeaseBindingIp | read-only | current | certain address appointed, format is x.x.x.x |
| 1.3.6.1.4.1.2751.100.13.2.12.1.2 | ColumndhcpServerLeaseBindingType | read-only | current | manual express handcraft bind style;dynamic express dynamic distribution style |
| 1.3.6.1.4.1.2751.100.13.2.12.1.3 | ColumndhcpServerLeaseBindingMac | read-only | current | MAC address |
| 1.3.6.1.4.1.2751.100.13.2.12.1.4 | ColumndhcpServerLeaseBindingLeaseTime | read-only | current | rent term |
| 1.3.6.1.4.1.2751.100.13.3 | NodedhcpSnooping | |||
| 1.3.6.1.4.1.2751.100.13.3.1 | ScalardhcpSnoopingEnable | read-create | current | Enable the dhcp snooping function. |
| 1.3.6.1.4.1.2751.100.13.3.2 | ScalardhcpSnoopingBindingEnalbe | read-create | current | Enable the dhcp snooping binding function. |
| 1.3.6.1.4.1.2751.100.13.3.3 | ScalardhcpSnoopingVlanEnable | read-create | current | Enable the dhcp snooping on vlan list string, the vlan list string is input like as '1-2'. If the next time input the string '3-5',then the final vlan list is … |
| 1.3.6.1.4.1.2751.100.13.3.4 | ScalardhcpSnoopingInformationEnalbe | read-create | current | Enable the dhcp snooping information function. |
| 1.3.6.1.4.1.2751.100.13.3.5 | ScalardhcpSnoopingLimitRate | read-create | current | Configration of dhcp packets rate on the switch, the default rate of dhcp packets received is 100 pps. |
| 1.3.6.1.4.1.2751.100.13.3.6 | ScalardhcpSnoopingActionMaxNum | read-create | current | Configration of the maximum number of dhcp snooping action on a port, the default value is 10. |
| 1.3.6.1.4.1.2751.100.13.3.7 | ScalardhcpSnoopingbindingARP | read-create | current | If set(0), the static ARP entry is not added when the dhcp snooping is created, if set(1), the static ARP entry is added according to the dhcp snooping binding… |
| 1.3.6.1.4.1.2751.100.13.3.8 | ScalardhcpSnoopingInformationOptionDelimiter | read-create | current | If set(0), then use colon to compart sub-option parameters, set(1), use dot to compart sub-option parameters, set(2), use slash to compart sub-option parameter… |
| 1.3.6.1.4.1.2751.100.13.3.9 | ScalardhcpSnoopingInformationOptionSubscriberIDFormat | read-create | current | If set(0), then use hex format of vlan and mac address, set(1), use ACSII format of vlan and mac address, set(2), use vs-hp format to keep compatibility with H… |
| 1.3.6.1.4.1.2751.100.13.3.10 | ScalardhcpSnoopingInformationOptionRemoteID | read-create | current | If input the 'standard' string ,then use vlan mac address format for option82 sub-option 2, other string, that be used as romote ID of option82 sub-option 2, t… |
| 1.3.6.1.4.1.2751.100.13.3.11 | ScalardhcpSnoopingInformationOptionAllowUntrusted | read-create | current | If set(0), the dhcp packets with option82 are discarded, if set (1), the dhcp packets with option82 are permitted, and the content of option82 is not changed. |
| 1.3.6.1.4.1.2751.100.13.3.12 | ScalardhcpSnoopingOptionSelfDefinedSubscriberIDFormat | read-create | current | If set(0), then use ASCII format to generate sub-scriber ID, set(1), use hex format to generate sub-scriber ID, the default value is set(1). |
| 1.3.6.1.4.1.2751.100.13.3.13 | ScalardhcpSnoopingOptionSelfDefinedRemoteIDFormat | read-create | current | If set(0), then use ASCII format to generate remote ID, set(1), use hex format to generate remote ID, the default value is set(1). |
| 1.3.6.1.4.1.2751.100.13.3.14 | ScalardhcpSnoopingOptionSelfDefinedSubscriberID | read-create | current | If user does not configure the circuit-id of option82 explicitly on a port, then the user can self define format to generate the circuit-id, the format options… |
| 1.3.6.1.4.1.2751.100.13.3.15 | ScalardhcpSnoopingOptionSelfDefinedRemoteID | read-create | current | If user does not configure the remote-id of option82 explicitly on a port, then the user can self define format to generate the remote-id, the format options i… |
| 1.3.6.1.4.1.2751.100.13.3.16 | ScalardhcpSnoopingClearBinding | read-create | current | Clear the dhcp snooping bindings, the user can specify the mac address and vlan ID, or interface name and vlan ID ,or vlan ID, if input 'all' string, then clea… |
| 1.3.6.1.4.1.2751.100.13.3.17 | TabledhcpSnoopingPortConfigTable | not-accessible | current | After enable the dhcp snooping function, the administrator can configure the port information. |
| 1.3.6.1.4.1.2751.100.13.3.17.1 | RowdhcpSnoopingPortConfigEntry | not-accessible | current | A conceptual row of dhcpSnoopingPortConfigTable. |
| 1.3.6.1.4.1.2751.100.13.3.17.1.1 | ColumndhcpSnoopingPortIndex | not-accessible | current | Configure the dhcp snooping function on the specified port. |
| 1.3.6.1.4.1.2751.100.13.3.17.1.2 | ColumndhcpSnoopingUserControlMaxNum | read-create | current | Configure the maximum of the binding users on a port, the range of binding users number is 0-1024,the default number is 1024. |
| 1.3.6.1.4.1.2751.100.13.3.17.1.3 | ColumndhcpSnoopingUserControl | read-create | current | If set(0), not enable the user control function on a specified port, if set(1), enable the user control function on a specified port, the default value is set(… |
| 1.3.6.1.4.1.2751.100.13.3.17.1.4 | ColumndhcpSnoopingTrust | read-create | current | Configure trust function on a port or vlan list string.If input the string 'all', then trust all the vlan. If input the string '1-2', then only trust the DHCP … |
| 1.3.6.1.4.1.2751.100.13.3.17.1.5 | ColumndhcpSnoopingBindingDot1x | read-create | current | If set(0), not enable to notify dhcp snooping binding information to Dot1x module, if set(1), enable to notify dhcp snooping binding information to Dot1x modul… |
| 1.3.6.1.4.1.2751.100.13.3.17.1.6 | ColumndhcpSnoopingSubScriberID | read-create | current | If input the 'standard' string ,then use vlan mac address format for option82 sub-option 2, other string, that be used as romote ID of option82 sub-option 2, t… |
| 1.3.6.1.4.1.2751.100.13.3.17.1.7 | ColumndhcpSnoopingAlarmCount | read-only | current | Show the alarm count of dhcp snooping on a specified port. |
| 1.3.6.1.4.1.2751.100.13.3.17.1.8 | ColumndhcpSnoopingBindingCount | read-only | current | Show the binding count of dhcp snooping on a specified port. |
| 1.3.6.1.4.1.2751.100.13.3.18 | TabledhcpSnoopingPortActionTable | not-accessible | current | After enable the dhcp snooping function, the administrator can configure the port action. |
| 1.3.6.1.4.1.2751.100.13.3.18.1 | RowdhcpSnoopingPortActionEntry | not-accessible | current | A conceptual row of dhcpSnoopingPortActionTable. |
| 1.3.6.1.4.1.2751.100.13.3.18.1.1 | ColumndhcpSnoopingPort | not-accessible | current | Configure the dhcp snooping function on the specified port. |
| 1.3.6.1.4.1.2751.100.13.3.18.1.2 | ColumndhcpSnoopingActionType | read-create | current | If set(0), not to add any action, if set(1), add shutdown action , and if set(2), add blackhole action on a port when detectd the DHCP server protended . |
| 1.3.6.1.4.1.2751.100.13.3.18.1.3 | ColumndhcpSnoopingActionRecoveryTime | read-create | current | Configure the recovery time of action, the range time is 10-3600 seconds, the default value is 30 seconds. |
| 1.3.6.1.4.1.2751.100.13.3.18.1.4 | ColumndhcpSnoopingActionStatus | read-create | current | If set(0), then destory an aciton configured previously, if set(1), then configure an action on a port. |
| 1.3.6.1.4.1.2751.100.13.3.19 | TabledhcpSnoopingStaticBindingTable | not-accessible | current | After enable the dhcp snooping function, the administrator can configure or delete the dhcp snooping static binding. |
| 1.3.6.1.4.1.2751.100.13.3.19.1 | RowdhcpSnoopingStaticBindingEntry | not-accessible | current | A conceptual row of dhcpSnoopingStaticBindingTable. |
| 1.3.6.1.4.1.2751.100.13.3.19.1.1 | ColumndhcpSnoopingStaticBindingIP | not-accessible | current | The one IP address just only identifies one ack binding entry. |
| 1.3.6.1.4.1.2751.100.13.3.19.1.2 | ColumndhcpSnoopingStaticBindingMAC | read-create | current | Configure the MAC address of the static binding. |
| 1.3.6.1.4.1.2751.100.13.3.19.1.3 | ColumndhcpSnoopingStaticBindingMask | read-create | current | Configure the IP address mask of the static binding. |
| 1.3.6.1.4.1.2751.100.13.3.19.1.4 | ColumndhcpSnoopingStaticBindingPort | read-create | current | Configure the port of the static binding. |
| 1.3.6.1.4.1.2751.100.13.3.19.1.5 | ColumndhcpSnoopingStaticBindingVid | read-create | current | Configure the vlan ID of the static binding. |
| 1.3.6.1.4.1.2751.100.13.3.19.1.6 | ColumndhcpSnoopingStaticBindingStatus | read-create | current | If set(0), then distory a specified static binding that has been configured, if set(1), create a specified static binding according to the input content. |
| 1.3.6.1.4.1.2751.100.13.3.20 | TabledhcpSnoopingAckBindingInfoTable | not-accessible | current | Show the specified bindings after received the DHCP ACK packets. |
| 1.3.6.1.4.1.2751.100.13.3.20.1 | RowdhcpSnoopingAckBindingInfoEntry | not-accessible | current | A conceptual row of dhcpSnoopingAckBindingInfoTable. |
| 1.3.6.1.4.1.2751.100.13.3.20.1.1 | ColumndhcpSnoopingAckBindingIP | not-accessible | current | The one IP address just only identifies one ack binding entry. |
| 1.3.6.1.4.1.2751.100.13.3.20.1.2 | ColumndhcpSnoopingAckBindingMAC | read-only | current | Show the MAC address of the ack binding. |
| 1.3.6.1.4.1.2751.100.13.3.20.1.3 | ColumndhcpSnoopingAckBindingPort | read-only | current | Show the port index information of the ack binding. |
| 1.3.6.1.4.1.2751.100.13.3.20.1.4 | ColumndhcpSnoopingAckBindingVid | read-only | current | Show the Vid information of the ack bidning. |
| 1.3.6.1.4.1.2751.100.13.3.20.1.5 | ColumndhcpSnoopingAckBindingLease | read-only | current | Show the lease of the ack binding. The lease of static binding is infinite, the lease of dynamic binding comes from the DHCP reply packets of dhcp server. |
| 1.3.6.1.4.1.2751.100.13.3.20.1.6 | ColumndhcpSnoopingAckBindingFlag | read-only | current | Show the type of the ack binding. The flag 'S' indentifies the static type binding, 'D' indentifies the dynamic type binding, 'U' indentifies that bindings are… |
| 1.3.6.1.4.1.2751.100.13.3.21 | TabledhcpSnoopingRequestBindingInfoTable | not-accessible | current | Show the specified bindings after received the DHCP request packets. |
| 1.3.6.1.4.1.2751.100.13.3.21.1 | RowdhcpSnoopingRequestBindingInfoEntry | not-accessible | current | A conceptual row of dhcpSnoopingRequestBindingInfoTable. |
| 1.3.6.1.4.1.2751.100.13.3.21.1.1 | ColumndhcpSnoopingRequestBindingIP | not-accessible | current | The one IP address just only identifies one Request binding entry. |
| 1.3.6.1.4.1.2751.100.13.3.21.1.2 | ColumndhcpSnoopingRequestBindingMAC | read-only | current | Show the MAC address of the Request binding. |
| 1.3.6.1.4.1.2751.100.13.3.21.1.3 | ColumndhcpSnoopingRequestBindingPort | read-only | current | Show the port index information of the Request binding. |
| 1.3.6.1.4.1.2751.100.13.3.21.1.4 | ColumndhcpSnoopingRequestBindingVid | read-only | current | Show the Vid information of the Request binding. |
| 1.3.6.1.4.1.2751.100.13.3.21.1.5 | ColumndhcpSnoopingRequestBindingLease | read-only | current | Show the lease of the Request binding. |
| 1.3.6.1.4.1.2751.100.13.3.22 | TabledhcpSnoopingAlarmInfoTable | not-accessible | current | Show the dhcp snooping alarm information. |
| 1.3.6.1.4.1.2751.100.13.3.22.1 | RowdhcpSnoopingAlarmInfoEntry | not-accessible | current | A conceptual row of dhcpSnoopingAlarmInfoTable. |
| 1.3.6.1.4.1.2751.100.13.3.22.1.1 | ColumndhcpSnoopingAlarmInfoPortIndex | not-accessible | current | The port sequence of the alarm events. |
| 1.3.6.1.4.1.2751.100.13.3.22.1.2 | ColumndhcpSnoopingAlarmInfoNum | not-accessible | current | The sequence of the alarm events on a port. |
| 1.3.6.1.4.1.2751.100.13.3.22.1.3 | ColumndhcpSnoopingAlarmInfoType | read-only | current | Show the type information of the alarm event. |
| 1.3.6.1.4.1.2751.100.13.3.22.1.4 | ColumndhcpSnoopingAlarmInfoBlackholeMAC | read-only | current | Show the blackhole mac address of the alarm event. |
| 1.3.6.1.4.1.2751.100.13.3.22.1.5 | ColumndhcpSnoopingAlarmInfoRecoveryTime | read-only | current | Show the recovery time of the alarm event. |
| 1.3.6.1.4.1.2751.100.13.3.22.1.6 | ColumndhcpSnoopingAlarmInfoRecoveryActionStatus | read-only | current | Show the status of the recovery action. |
| 1.3.6.1.4.1.2751.100.13.3.23 | NodedhcpSnoopingStatisticTable | |||
| 1.3.6.1.4.1.2751.100.13.3.23.1 | ScalardhcpSnoopingStatisticAlarmNum | read-only | current | Show the total number of the alarm events. |
| 1.3.6.1.4.1.2751.100.13.3.23.2 | ScalardhcpSnoopingStatisticAckBindingNum | read-only | current | Show the total number of the ack bindings. |
| 1.3.6.1.4.1.2751.100.13.3.23.3 | ScalardhcpSnoopingStatisticRequestBindingNum | read-only | current | Show the total number of the request bindings. |
| 1.3.6.1.4.1.2751.100.13.3.23.4 | ScalardhcpSnoopingStatisticDropPktsNum | read-only | current | Show the total number of the drop packets. |
| 1.3.6.1.4.1.2751.100.13.3.23.5 | ScalardhcpSnoopingStatisticDiscardPktsNum | read-only | current | Show the total number of the discarded packets. |
| 1.3.6.1.4.1.2751.100.13.3.25 | ScalardhcpSnoopingVlandisable | write-only | current | disable the dhcp snooping on vlan list string, the vlan list string is input like as '1-2'. If the next time input the string '3-5',then the final vlan list is… |
| 1.3.6.1.4.1.2751.100.14 | NodepriportGroup | |||
| 1.3.6.1.4.1.2751.100.14.1 | ScalarsystemPriority | read-create | current | Modify the system priority which is used by port group. |
| 1.3.6.1.4.1.2751.100.14.2 | TableportGroupTable | not-accessible | current | This table contains port group information associated with the local system known to this agent. |
| 1.3.6.1.4.1.2751.100.14.2.1 | RowportGroupEntry | not-accessible | current | Configure the port group information. |
| 1.3.6.1.4.1.2751.100.14.2.1.1 | ColumnportGroupIndex | not-accessible | current | Port group number. |
| 1.3.6.1.4.1.2751.100.14.2.1.2 | ColumnportGroupMemberCount | read-only | current | The number of port group member. |
| 1.3.6.1.4.1.2751.100.14.2.1.3 | ColumnloadBalance | read-create | current | Load balancing method: dst-src-mac(1):destination and source mac address; dst-src-ip(2):destination and source ip address; src-mac(3):source mac address; dst-m… |
| 1.3.6.1.4.1.2751.100.14.2.1.4 | ColumnportGroupInfo | read-only | current | Port group brief information. Format is ID, Mode, Partner ID, Ports and Load-balance. If there is no member in the port group, the value is empty. |
| 1.3.6.1.4.1.2751.100.14.3 | TableportGroupPortListTable | not-accessible | current | This table contains port group member information associated with the local system known to this agent. |
| 1.3.6.1.4.1.2751.100.14.3.1 | RowportGroupPortListEntry | not-accessible | current | Configure the port group member information. |
| 1.3.6.1.4.1.2751.100.14.3.1.1 | ColumnportGroupMemberIndex | not-accessible | current | Port group member index. Format is group number and port index of member. |
| 1.3.6.1.4.1.2751.100.14.3.1.2 | ColumnportGroupMemberName | read-only | current | The name of port group member. |
| 1.3.6.1.4.1.2751.100.14.3.1.3 | ColumnportGroupMemberMode | read-only | current | The mode of port group member. |
| 1.3.6.1.4.1.2751.100.14.3.1.4 | ColumnportGroupMemberPriority | read-write | current | The port priority of port group member. If the port group mode is on, the value is -1. |
| 1.3.6.1.4.1.2751.100.14.3.1.5 | ColumnportGroupMemberTimeout | read-only | current | The timeout mode of port group member. If the port group mode is on, the value is -1. |
| 1.3.6.1.4.1.2751.100.14.3.1.6 | ColumnportGroupMemberStatus | read-only | current | The status of port group member. If the port group mode is on, the value is -1. |
| 1.3.6.1.4.1.2751.100.15 | NodeprisnmpMgt | |||
| 1.3.6.1.4.1.2751.100.15.1 | ScalarsnmpSecurityIpStatus | read-create | current | Enable or disable secure IP address check function on the NMS. |
| 1.3.6.1.4.1.2751.100.15.2 | ScalarsnmpTrapHostStatus | read-create | current | Enable the switch to send Trap message. This command is used for SNMP v1/v2. |
| 1.3.6.1.4.1.2751.100.15.3 | ScalarsnmpRmonStatus | read-create | current | Enable/disable RMON. |
| 1.3.6.1.4.1.2751.100.15.4 | TablesecurityIpTable | not-accessible | current | A list of snmp securityIp entries. |
| 1.3.6.1.4.1.2751.100.15.4.1 | RowsecurityIpEntry | not-accessible | current | Configure the secure IP address which is allowed to access the switch on the NMS; |
| 1.3.6.1.4.1.2751.100.15.4.1.1 | ColumnsecurityIpIndex | not-accessible | current | Index. |
| 1.3.6.1.4.1.2751.100.15.4.1.2 | ColumnsecurityIpAddress | read-create | current | The address of security. |
| 1.3.6.1.4.1.2751.100.15.4.1.3 | ColumnsecurityIpStatus | read-create | current | Writing this to active(1) creates an entry. Writing this to destroy(2) destroys an entry. |
| 1.3.6.1.4.1.2751.100.15.5 | TabletrapDestTable | not-accessible | current | A list of trap destination entries. |
| 1.3.6.1.4.1.2751.100.15.5.1 | RowtrapDestEntry | not-accessible | current | This entry includes a destination IP address to which to send traps for this community. |
| 1.3.6.1.4.1.2751.100.15.5.1.1 | ColumntrapDestIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.2751.100.15.5.1.2 | ColumntrapDestAddress | read-create | current | The address to send traps. |
| 1.3.6.1.4.1.2751.100.15.5.1.3 | ColumntrapDestVersion | read-create | current | This variables represent the version of the Trap we wish to send to trap Receiver. If the value is 0, mean we wish to send Version 1 trap. If the value is 1, m… |
| 1.3.6.1.4.1.2751.100.15.5.1.4 | ColumntrapDestCommunity | read-create | current | A community to which this destination address belongs. |
| 1.3.6.1.4.1.2751.100.15.5.1.5 | ColumntrapDestStatus | read-create | current | Writing this to active(1) creates an entry. Writing this to destroy(2) destroys an entry. |
| 1.3.6.1.4.1.2751.100.16 | Nodel3 | |||
| 1.3.6.1.4.1.2751.100.16.1 | NodearpMgt | |||
| 1.3.6.1.4.1.2751.100.16.1.1 | ScalararpCacheDeleteAll | read-create | current | when set , triger flush arp-cache, when get ,nosense |
| 1.3.6.1.4.1.2751.100.16.1.2 | ScalararpCacheTimeout | read-only | current | arp cache timeout time |
| 1.3.6.1.4.1.2751.100.16.1.3 | ScalararpSecurityUpdateProtectALL | read-create | current | global enable or disable arp security update protect |
| 1.3.6.1.4.1.2751.100.16.1.4 | ScalararpSecurityLearnProtectALL | read-create | current | global enable or disable arp security learn protect |
| 1.3.6.1.4.1.2751.100.16.1.5 | ScalararpSecurityConvertALL | read-create | current | global convert dynamic arp-cache to static arp item .enable mean convert |
| 1.3.6.1.4.1.2751.100.16.1.6 | TablearpSecurityTable | not-accessible | current | arp security table |
| 1.3.6.1.4.1.2751.100.16.1.6.1 | RowarpsecurityEntry | not-accessible | current | index is L3 interface index |
| 1.3.6.1.4.1.2751.100.16.1.6.1.1 | ColumnarpSecurityIfindex | not-accessible | current | L3 interface index |
| 1.3.6.1.4.1.2751.100.16.1.6.1.2 | ColumnarpSecurityUpdateProtect | read-create | current | enable or disable arp security update protect on the current port |
| 1.3.6.1.4.1.2751.100.16.1.6.1.3 | ColumnarpSecurityLearnProtect | read-create | current | enable or disable arp security learn protect on the current port |
| 1.3.6.1.4.1.2751.100.16.1.6.1.4 | ColumnarpSecurityConvert | read-create | current | convert dynamic arp-cache to static arp item on the port.enable mean convert,get OPS is nosense |
| 1.3.6.1.4.1.2751.100.16.1.7 | TablearpProxyArpTable | not-accessible | current | configure arp proxy list |
| 1.3.6.1.4.1.2751.100.16.1.7.1 | RowarpProxyArpEntry | not-accessible | current | index is L3 interface index |
| 1.3.6.1.4.1.2751.100.16.1.7.1.1 | ColumnarpProxyArpIfIndex | not-accessible | current | L3 interface index |
| 1.3.6.1.4.1.2751.100.16.1.7.1.2 | ColumnarpProxyArpStatus | read-create | current | arp proxy enable |
| 1.3.6.1.4.1.2751.100.16.1.8 | TablearpStacticTable | not-accessible | current | static state arp configuration list |
| 1.3.6.1.4.1.2751.100.16.1.8.1 | RowarpStaticEntry | not-accessible | current | index is 'arpProxyArpIfIndex.arpStaticIpaddress'. |
| 1.3.6.1.4.1.2751.100.16.1.8.1.1 | ColumnarpStaticIfindex | not-accessible | current | L3 interface index |
| 1.3.6.1.4.1.2751.100.16.1.8.1.2 | ColumnarpStaticIpaddress | not-accessible | current | ip address |
| 1.3.6.1.4.1.2751.100.16.1.8.1.3 | ColumnarpStaticMac | read-create | current | the Mac address of the arp item |
| 1.3.6.1.4.1.2751.100.16.1.8.1.4 | ColumnarpStaticPortIndex | read-create | current | the port index of the arp item |
| 1.3.6.1.4.1.2751.100.16.1.8.1.5 | ColumnarpStaticStatus | read-create | current | valid(1),this is a active arp when get/getnext; when set,mean create the static arp item invalid(2); when set, mean destory the current arp item waitingforset(… |
| 1.3.6.1.4.1.2751.100.16.2 | NoderouteMgt | |||
| 1.3.6.1.4.1.2751.100.16.2.1 | TableipStaticRouteExtTable | not-accessible | current | static route configuration list |
| 1.3.6.1.4.1.2751.100.16.2.1.1 | RowipStaticRouteExtEntry | not-accessible | current | The index of this table is ip.mask |
| 1.3.6.1.4.1.2751.100.16.2.1.1.1 | ColumnipStaticRouteExtDest | not-accessible | current | static route of intention net segment |
| 1.3.6.1.4.1.2751.100.16.2.1.1.2 | ColumnipStaticRouteExtMask | not-accessible | current | mask |
| 1.3.6.1.4.1.2751.100.16.2.1.1.3 | ColumnipStaticRouteExtNextHop | read-create | current | next step ip |
| 1.3.6.1.4.1.2751.100.16.2.1.1.4 | ColumnipStaticRouteExtMetric | read-create | current | Manage distance/PRI |
| 1.3.6.1.4.1.2751.100.16.2.1.1.5 | ColumnipStaticRouteExtStatus | read-create | current | When you get/getnext one entry, the meaning of 'valid' is that the static route which you get is valid (or active); when you want to configure one static route… |
| 1.3.6.1.4.1.2751.100.16.3 | NoderipMgt | |||
| 1.3.6.1.4.1.2751.100.16.3.1 | NoderipTimers | |||
| 1.3.6.1.4.1.2751.100.16.3.1.1 | ScalarripUpdateTime | read-write | current | The update time in seconds controls the advertising of regular update messages. The real working model, while using this timer, the time should be offset by a … |
| 1.3.6.1.4.1.2751.100.16.3.1.2 | ScalarripTimeoutTime | read-write | current | The timeout timer in seconds governs the validity of a route. It is initialized when a route is established, and any time an update message is received for the… |
| 1.3.6.1.4.1.2751.100.16.3.1.3 | ScalarripGarbageCollectionTime | read-write | current | When the information about a route becomes invalid, the system should not immediately purge that route from its table. Instead, it continues to advertise the r… |
| 1.3.6.1.4.1.2751.100.16.3.2 | ScalarripRoutingProcessStatus | read-write | current | Enable or Disable RIP routing process on a system. |
| 1.3.6.1.4.1.2751.100.16.3.3 | ScalarripRouterVersion | read-write | current | To specify a RIP version used globally by the rourter. |
| 1.3.6.1.4.1.2751.100.16.3.4 | TableripInstabilityPreventingTable | not-accessible | current | A list of RIP instability preventing status |
| 1.3.6.1.4.1.2751.100.16.3.4.1 | RowripInstabilityPreventingEntry | not-accessible | current | An entry in the table, containing information about RIP instability preventing configuration. The ifIndex index is a VLAN's ifIndex |
| 1.3.6.1.4.1.2751.100.16.3.4.1.1 | ColumnripVlanIndex | read-only | current | This is defined as a VLAN interface. A routing interface is a VLAN binds a IP subnet. |
| 1.3.6.1.4.1.2751.100.16.3.4.1.2 | ColumnripSplitHorizonStatus | read-write | current | Enable or Disable RIP instability preventing status on an interface |
| 1.3.6.1.4.1.2751.100.16.3.5 | ScalarripStatisticsReset | read-write | current | Write it to reset(1), the following objects in RFC 1724 should be reset: 1. Global Counters: 'rip2GlobalRouteChanges', 'rip2GlobalQueries'. 2. Interface Status… |
| 1.3.6.1.4.1.2751.100.16.3.6 | TableripNetworkInterfaceTable | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.16.3.6.1 | RowripNetworkInterfaceEntry | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.16.3.6.1.1 | ColumnripNetworkInterfaceAddress | read-only | current | The RIP Network address(the ip address of the interface). |
| 1.3.6.1.4.1.2751.100.16.3.6.1.2 | ColumnripNetworkInterfaceStatus | read-create | current | Set this variable to create or destroy a RIP network address. ValidStatus: A simple status value for the object to create and destroy a table entry. This is a … |
| 1.3.6.1.4.1.2751.100.16.3.7 | TableripNetworkAddrTable | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.16.3.7.1 | RowripNetworkAddrEntry | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.16.3.7.1.1 | ColumnripNetworkAddrAddress | read-only | current | The RIP Network address. |
| 1.3.6.1.4.1.2751.100.16.3.7.1.2 | ColumnripNetworkAddrPrefixLen | read-only | current | The RIP Network prefix length of address. |
| 1.3.6.1.4.1.2751.100.16.3.7.1.3 | ColumnripNetworkAddrStatus | read-create | current | Set this variable to create or destroy a RIP network address. ValidStatus: A simple status value for the object to create and destroy a table entry. This is a … |
| 1.3.6.1.4.1.2751.100.16.4 | NodeospfMgt | |||
| 1.3.6.1.4.1.2751.100.16.4.1 | NodeospfSystemGroup | |||
| 1.3.6.1.4.1.2751.100.16.4.1.1 | ScalarospfRouterIdType | read-only | current | Set router ID automatically or manually. |
| 1.3.6.1.4.1.2751.100.16.4.1.2 | ScalarospfRfc1583CompatibleState | read-write | current | Enable or disable rfc1583 compatibility. |
| 1.3.6.1.4.1.2751.100.16.4.1.3 | ScalarospfAutoCost | read-write | current | Set the reference bandwith of auto cost, the unit is Mbps. |
| 1.3.6.1.4.1.2751.100.16.4.1.4 | ScalarospfAdvertiseDefaultRoute | read-write | current | If always is set, always advertises the default route regardless of whether the default route exists;If notalways is set ,advertises the default route when the… |
| 1.3.6.1.4.1.2751.100.16.4.1.5 | ScalarospfDefaultExternalMetric | read-write | current | Metric used for generating the default route. |
| 1.3.6.1.4.1.2751.100.16.4.1.6 | ScalarospfSpfHoldTime | read-write | current | Sets the hold time between two consecutive SPF calculations. |
| 1.3.6.1.4.1.2751.100.16.4.1.7 | ScalarospfSpfDelayTime | read-write | current | Sets the delay time to calculate SPF Delay time, in seconds, between when OSPF receives a topology change and when it starts an SPF calculation. |
| 1.3.6.1.4.1.2751.100.16.4.1.8 | ScalarospfAreaNumber | read-only | current | Records the OSPF area numbers. |
| 1.3.6.1.4.1.2751.100.16.4.1.9 | ScalarclearOspfProcess | read-write | current | clear ip ospf process by process ID. |
| 1.3.6.1.4.1.2751.100.16.4.2 | TableospfNssaTable | not-accessible | current | A conceptually table for ospfNssaEntry. |
| 1.3.6.1.4.1.2751.100.16.4.2.1 | RowospfNssaEntry | not-accessible | current | A conceptually row for ospfNssaTable. |
| 1.3.6.1.4.1.2751.100.16.4.2.1.1 | ColumnospfNssaAreaId | read-only | current | The 32-bit identifier for the NSSA. On creation, this can be derived from the instance. |
| 1.3.6.1.4.1.2751.100.16.4.2.1.2 | ColumnospfNssaStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. |
| 1.3.6.1.4.1.2751.100.16.4.2.1.3 | ColumnospfNssaRedistributeStatus | read-create | current | Enabled or disabled to import routes only into the normal areas, but not into the NSSA area. |
| 1.3.6.1.4.1.2751.100.16.4.2.1.4 | ColumnospfNssaOriginateDefaultInfoStatus | read-create | current | Enable or disable to generate a Type 7 default into the NSSA area. |
| 1.3.6.1.4.1.2751.100.16.4.3 | TableospfRedistributeTable | not-accessible | current | The conceptual table of all of ospfRedistributeEntry. |
| 1.3.6.1.4.1.2751.100.16.4.3.1 | RowospfRedistributeEntry | not-accessible | current | The conceptual row for ospfRedistributeTable. |
| 1.3.6.1.4.1.2751.100.16.4.3.1.1 | ColumnospfRedistributeProtocol | read-only | current | Protocol ID. |
| 1.3.6.1.4.1.2751.100.16.4.3.1.2 | ColumnospfRedistributeStatus | read-create | current | enable when the ospfRedistributeProtocol is equal to rip, 'enable' stands for redistribute the route from rip. |
| 1.3.6.1.4.1.2751.100.16.4.3.1.3 | ColumnospfRedistributeMetricType | read-create | current | Metric type. |
| 1.3.6.1.4.1.2751.100.16.4.3.1.4 | ColumnospfRedistributeMetric | read-create | current | Metric value. |
| 1.3.6.1.4.1.2751.100.16.4.4 | TableospfSummaryAddressTable | not-accessible | current | The conceptual table of all of ospfSummaryAddressEntry. |
| 1.3.6.1.4.1.2751.100.16.4.4.1 | RowospfSummaryAddressEntry | not-accessible | current | The conceptual row for ospfSummaryAddressTable. |
| 1.3.6.1.4.1.2751.100.16.4.4.1.1 | ColumnospfSummaryAddress | read-only | current | Summary address. |
| 1.3.6.1.4.1.2751.100.16.4.4.1.2 | ColumnospfSummaryMask | read-only | current | Summary mask. |
| 1.3.6.1.4.1.2751.100.16.4.4.1.3 | ColumnospfSummaryStatus | read-create | current | |
| 1.3.6.1.4.1.2751.100.16.4.5 | TableospfNetworkAreaAddressTable | not-accessible | current | The conceptual table of all of ospfNetworkAreaAddressEntry. |
| 1.3.6.1.4.1.2751.100.16.4.5.1 | RowospfNetworkAreaAddressEntry | not-accessible | current | The conceptual row for ospfNetworkAreaAddressTable. |
| 1.3.6.1.4.1.2751.100.16.4.5.1.1 | ColumnospfNetworkAareaAddress | read-only | current | NetworkArea address. |
| 1.3.6.1.4.1.2751.100.16.4.5.1.2 | ColumnospfNetworkAreaMask | read-only | current | NetworkArea mask. |
| 1.3.6.1.4.1.2751.100.16.4.5.1.3 | ColumnospfNetworkAreaAreaId | read-only | current | NetworkArea area ID. |
| 1.3.6.1.4.1.2751.100.16.4.5.1.4 | ColumnospfNetworkAreaStatus | read-create | current | enabled(1), disabled(0). valid/enable invalid/disable ValidStatus: A simple status value for the object to create and destroy a table entry. This is a simplifi… |
| 1.3.6.1.4.1.2751.100.16.5 | NodedvmrpMgt | |||
| 1.3.6.1.4.1.2751.100.16.5.1 | NodedvmrpScalar | |||
| 1.3.6.1.4.1.2751.100.16.5.1.1 | ScalardvmrpVersionString | read-only | current | The router's DVMRP version information. Similar to sysDescr in MIB-II, this is a free-form field which can be used to display vendor-specific information. |
| 1.3.6.1.4.1.2751.100.16.5.1.3 | ScalardvmrpNumRoutes | read-only | current | The number of entries in the routing table. This can be used to monitor the routing table size. |
| 1.3.6.1.4.1.2751.100.16.5.1.4 | ScalardvmrpReachableRoutes | read-only | current | The number of entries in the routing table with non infinite metrics. This can be used to detect network partitions by observing the ratio of reachable routes … |
| 1.3.6.1.4.1.2751.100.16.5.2 | TabledvmrpInterfaceTable | not-accessible | current | The (conceptual) table listing the router's multicast- capable interfaces. |
| 1.3.6.1.4.1.2751.100.16.5.2.1 | RowdvmrpInterfaceEntry | not-accessible | current | An entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides. |
| 1.3.6.1.4.1.2751.100.16.5.2.1.1 | ColumndvmrpInterfaceIndex | read-only | current | The ifIndex value of the interface for which DVMRP is enabled. |
| 1.3.6.1.4.1.2751.100.16.5.2.1.2 | ColumndvmrpInterfaceLocalAddress | read-only | current | The IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress fo… |
| 1.3.6.1.4.1.2751.100.16.5.2.1.3 | ColumndvmrpInterfaceMetric | read-create | current | The distance metric for this interface which is used to calculate distance vectors. |
| 1.3.6.1.4.1.2751.100.16.5.2.1.4 | ColumndvmrpInterfaceStatus | read-create | current | The status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the v… |
| 1.3.6.1.4.1.2751.100.16.5.2.1.5 | ColumndvmrpInterfaceRcvBadPkts | read-only | current | The number of DVMRP messages received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a rout… |
| 1.3.6.1.4.1.2751.100.16.5.2.1.6 | ColumndvmrpInterfaceRcvBadRoutes | read-only | current | The number of routes, in valid DVMRP packets, which were ignored because the entry was invalid. |
| 1.3.6.1.4.1.2751.100.16.5.2.1.7 | ColumndvmrpInterfaceSentRoutes | read-only | current | The number of routes, in DVMRP Report packets, which have been sent on this interface. Together with dvmrpNeighborRcvRoutes at a peer, this object is useful fo… |
| 1.3.6.1.4.1.2751.100.16.5.2.1.8 | ColumndvmrpInterfaceKey | read-only | current | The (shared) key for authenticating neighbors on this interface. This object is intended solely for the purpose of setting the interface key, and MUST be acces… |
| 1.3.6.1.4.1.2751.100.16.5.2.1.9 | ColumndvmrpInterfaceKeyVersion | read-only | current | The highest version number of all known interface keys for this interface used for authenticating neighbors. |
| 1.3.6.1.4.1.2751.100.16.5.2.1.10 | ColumndvmrpInterfaceGenerationId | read-only | current | The generation identifier for the interface. This is used by neighboring routers to detect whether the DVMRP routing table should be resent. |
| 1.3.6.1.4.1.2751.100.16.5.3 | TabledvmrpNeighborTable | not-accessible | current | The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving DVMRP messages. |
| 1.3.6.1.4.1.2751.100.16.5.3.1 | RowdvmrpNeighborEntry | not-accessible | current | An entry (conceptual row) in the dvmrpNeighborTable. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.1 | ColumndvmrpNeighborIfIndex | read-only | current | The value of ifIndex for the virtual interface used to reach this DVMRP neighbor. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.2 | ColumndvmrpNeighborAddress | read-only | current | The IP address of the DVMRP neighbor for which this entry contains information. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.3 | ColumndvmrpNeighborUpTime | read-only | current | The time since this DVMRP neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.4 | ColumndvmrpNeighborExpiryTime | read-only | current | The minimum time remaining before this DVMRP neighbor will be aged out. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.5 | ColumndvmrpNeighborGenerationId | read-only | current | The neighboring router's generation identifier. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.6 | ColumndvmrpNeighborMajorVersion | read-only | current | The neighboring router's major DVMRP version number. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.7 | ColumndvmrpNeighborMinorVersion | read-only | current | The neighboring router's minor DVMRP version number. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.8 | ColumndvmrpNeighborCapabilities | read-only | current | This object describes the neighboring router's capabilities. The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indi… |
| 1.3.6.1.4.1.2751.100.16.5.3.1.9 | ColumndvmrpNeighborRcvRoutes | read-only | current | The total number of routes received in valid DVMRP packets received from this neighbor. This can be used to diagnose problems such as unicast route injection, … |
| 1.3.6.1.4.1.2751.100.16.5.3.1.10 | ColumndvmrpNeighborRcvBadPkts | read-only | current | The number of packet received from this neighbor which were discarded as invalid. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.11 | ColumndvmrpNeighborRcvBadRoutes | read-only | current | The number of routes, in valid DVMRP packets received from this neighbor, which were ignored because the entry was invalid. |
| 1.3.6.1.4.1.2751.100.16.5.3.1.12 | ColumndvmrpNeighborState | read-only | current | State of the neighbor adjacency. |
| 1.3.6.1.4.1.2751.100.16.5.4 | TabledvmrpRouteTable | not-accessible | current | The table of routes learned through DVMRP route exchange. |
| 1.3.6.1.4.1.2751.100.16.5.4.1 | RowdvmrpRouteEntry | not-accessible | current | An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information. |
| 1.3.6.1.4.1.2751.100.16.5.4.1.1 | ColumndvmrpRouteSource | read-only | current | The network address which when combined with the corresponding value of dvmrpRouteSourceMask identifies the sources for which this entry contains multicast rou… |
| 1.3.6.1.4.1.2751.100.16.5.4.1.2 | ColumndvmrpRouteSourceMask | read-only | current | The network mask which when combined with the corresponding value of dvmrpRouteSource identifies the sources for which this entry contains multicast routing in… |
| 1.3.6.1.4.1.2751.100.16.5.4.1.3 | ColumndvmrpRouteUpstreamNeighbor | read-only | current | The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received. |
| 1.3.6.1.4.1.2751.100.16.5.4.1.4 | ColumndvmrpRouteIfIndex | read-only | current | The value of ifIndex for the interface on which IP datagrams sent by these sources are received. A value of 0 typically means the route is an aggregate for whi… |
| 1.3.6.1.4.1.2751.100.16.5.4.1.5 | ColumndvmrpRouteMetric | read-only | current | The distance in hops to the source subnet. |
| 1.3.6.1.4.1.2751.100.16.5.4.1.6 | ColumndvmrpRouteExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.2751.100.16.5.4.1.7 | ColumndvmrpRouteUpTime | read-only | current | The time since the route represented by this entry was learned by the router. |
| 1.3.6.1.4.1.2751.100.16.5.5 | TabledvmrpRouteNextHopTable | not-accessible | current | The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. |
| 1.3.6.1.4.1.2751.100.16.5.5.1 | RowdvmrpRouteNextHopEntry | not-accessible | current | An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed. |
| 1.3.6.1.4.1.2751.100.16.5.5.1.1 | ColumndvmrpRouteNextHopSource | read-only | current | The network address which when combined with the corresponding value of dvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a nex… |
| 1.3.6.1.4.1.2751.100.16.5.5.1.2 | ColumndvmrpRouteNextHopSourceMask | read-only | current | The network mask which when combined with the corresponding value of dvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop o… |
| 1.3.6.1.4.1.2751.100.16.5.5.1.3 | ColumndvmrpRouteNextHopIfIndex | read-only | current | The ifIndex value of the interface for the outgoing interface for this next hop. |
| 1.3.6.1.4.1.2751.100.16.5.5.1.4 | ColumndvmrpRouteNextHopType | read-only | current | Type is leaf if no downstream dependent neighbors exist on the outgoing virtual interface. Otherwise, type is branch. |
| 1.3.6.1.4.1.2751.100.16.5.6 | TabledvmrpPruneTable | not-accessible | current | The (conceptual) table listing the router's upstream prune state. |
| 1.3.6.1.4.1.2751.100.16.5.6.1 | RowdvmrpPruneEntry | not-accessible | current | An entry (conceptual row) in the dvmrpPruneTable. |
| 1.3.6.1.4.1.2751.100.16.5.6.1.1 | ColumndvmrpPruneGroup | read-only | current | The group address which has been pruned. |
| 1.3.6.1.4.1.2751.100.16.5.6.1.2 | ColumndvmrpPruneSource | read-only | current | The address of the source or source network which has been pruned. |
| 1.3.6.1.4.1.2751.100.16.5.6.1.3 | ColumndvmrpPruneSourceMask | read-only | current | The address of the source or source network which has been pruned. The mask must either be all 1's, or else dvmrpPruneSource and dvmrpPruneSourceMask must matc… |
| 1.3.6.1.4.1.2751.100.16.5.6.1.4 | ColumndvmrpPruneExpiryTime | read-only | current | The amount of time remaining before this prune should expire at the upstream neighbor. This value should be the minimum of the default prune lifetime and the r… |
| 1.3.6.1.4.1.2751.100.17 | NodesntpMgt | |||
| 1.3.6.1.4.1.2751.100.17.1 | ScalarsntpPollTime | read-write | current | The interval for SNTP clients to send requests to NTP/SNTP. |
| 1.3.6.1.4.1.2751.100.17.2 | TablesntpServerTable | not-accessible | current | The ipv4 sntp server configration table. |
| 1.3.6.1.4.1.2751.100.17.2.1 | RowsntpServerEntry | not-accessible | current | A set of configuration parameters for a ipv4 sntp server. |
| 1.3.6.1.4.1.2751.100.17.2.1.1 | ColumnsntpServerVersion | read-only | current | The version of ipv4 sntp server. |
| 1.3.6.1.4.1.2751.100.17.2.1.2 | ColumnsntpServerAddress | read-only | current | The ipv4 address of the sntp server. |
| 1.3.6.1.4.1.2751.100.17.2.1.3 | ColumnsntpServerStatus | read-create | current | Now state. |
| 1.3.6.1.4.1.2751.100.17.3 | TablesntpServer6Table | not-accessible | current | The ipv6 sntp server configration table. |
| 1.3.6.1.4.1.2751.100.17.3.1 | RowsntpServer6Entry | not-accessible | current | A set of configuration parameters for a ipv6 sntp server. |
| 1.3.6.1.4.1.2751.100.17.3.1.1 | ColumnsntpServer6Version | read-only | current | The version of ipv6 sntp server. |
| 1.3.6.1.4.1.2751.100.17.3.1.2 | ColumnsntpServer6Address | read-only | current | The IP address of the ipv6 sntp server. |
| 1.3.6.1.4.1.2751.100.17.3.1.3 | ColumnsntpServer6Status | read-create | current | Now state. |
| 1.3.6.1.4.1.2751.100.17.4 | NodesntpTimeZone | |||
| 1.3.6.1.4.1.2751.100.17.4.1 | ScalarsntpTimeZoneName | read-write | current | The name of sntp time zone. |
| 1.3.6.1.4.1.2751.100.17.4.2 | ScalarsntpTimeZoneType | read-write | current | The type of sntp time zone. |
| 1.3.6.1.4.1.2751.100.17.4.3 | ScalarsntpTimeZoneTime | read-write | current | The interval time of sntp time zone. |
| 1.3.6.1.4.1.2751.100.17.4.4 | ScalarsntpTimeZoneStatus | read-write | current | now state of sntp time zone. |
| 1.3.6.1.4.1.2751.100.18 | Nodeurpf | |||
| 1.3.6.1.4.1.2751.100.18.1 | ScalarurpfEnable | read-write | current | Global Enable or disable the Unicast reverse path forwarding. |
| 1.3.6.1.4.1.2751.100.18.2 | TableurpfPortTable | not-accessible | current | The URPF port configration table. |
| 1.3.6.1.4.1.2751.100.18.2.1 | RowurpfPortEntry | not-accessible | current | The index of this table is port index. |
| 1.3.6.1.4.1.2751.100.18.2.1.1 | ColumnurpfPortIndex | read-only | current | Port Index. |
| 1.3.6.1.4.1.2751.100.18.2.1.2 | ColumnurpfPortMode | read-create | current | Configration of the URPF mode on the port. |
| 1.3.6.1.4.1.2751.100.18.2.1.3 | ColumnurpfPortAllowDefault | read-create | current | Allow or not allow default route of URPF. |
| 1.3.6.1.4.1.2751.100.18.2.1.4 | ColumnurpfPortStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.20 | Nodedcscm | |||
| 1.3.6.1.4.1.2751.100.20.1 | ScalardcscmdcEnable | read-write | current | Dcscm destination control multicast is disable or enable |
| 1.3.6.1.4.1.2751.100.20.2 | NodedcscmdcAcl | |||
| 1.3.6.1.4.1.2751.100.20.2.1 | ScalardcscmdcAclNumber | read-create | current | |
| 1.3.6.1.4.1.2751.100.20.2.2 | ScalardcscmdcAclSourceIp | read-create | current | Source ip address of acl entry |
| 1.3.6.1.4.1.2751.100.20.2.3 | ScalardcscmdcAclSourceMask | read-create | current | Source Mask of acl entry |
| 1.3.6.1.4.1.2751.100.20.2.4 | ScalardcscmdcAclDestinationIp | read-create | current | Destination ip address of acl entry.the destination ip must be a valid multicast group address. |
| 1.3.6.1.4.1.2751.100.20.2.5 | ScalardcscmdcAclDestinationMask | read-create | current | Destination Mask of acl entry. the destination mask should meet the request of muticast group address. |
| 1.3.6.1.4.1.2751.100.20.2.6 | ScalardcscmdcAclPermitOrDeny | read-write | current | acl entry permit or deny ; 0:deny; 1:permit; 2:del this acl entry |
| 1.3.6.1.4.1.2751.100.20.3 | TabledcscmVMacbindingTable | not-accessible | current | dcscm destination control multicast, Acl is binded to VMac |
| 1.3.6.1.4.1.2751.100.20.3.1 | RowdcscmVMacbindingEntry | not-accessible | current | The index of this table is Vlanid,MacAddress |
| 1.3.6.1.4.1.2751.100.20.3.1.1 | ColumndcscmVMacbindingVlanid | read-only | current | Dcscm destination control multicast,The vlanid of rule |
| 1.3.6.1.4.1.2751.100.20.3.1.2 | ColumndcscmVMacbindingMacAddr | read-only | current | Dcscm destination control multicast,The Mac Address of rule |
| 1.3.6.1.4.1.2751.100.20.3.1.3 | ColumndcscmVMacbindingAclNumber | read-write | current | Dcscm destination control multicast,The Acl number of rule ; 0 means del the rule binded to vmac |
| 1.3.6.1.4.1.2751.100.20.4 | TabledcscmSipbindingTable | not-accessible | current | dcscm destination control multicast, Acl is binded to Sip |
| 1.3.6.1.4.1.2751.100.20.4.1 | RowdcscmSipbindingEntry | not-accessible | current | The index of this table is Sourceip,SourceMask |
| 1.3.6.1.4.1.2751.100.20.4.1.1 | ColumndcscmSipbindingSipAddress | read-only | current | Dcscm destination control multicast,The Source ip of rule |
| 1.3.6.1.4.1.2751.100.20.4.1.2 | ColumndcscmSipbindingSipMask | read-only | current | Dcscm destination control multicast,The Source ip mask len of rule |
| 1.3.6.1.4.1.2751.100.20.4.1.3 | ColumndcscmSipbindingAclNumber | read-write | current | Dcscm destination control multicast,The Acl number of rule;0 means del the rule binded to sip |
| 1.3.6.1.4.1.2751.100.20.5 | TabledcscmdcPortbindingTable | not-accessible | current | dcscm destination control multicast, Acl is binded to Port |
| 1.3.6.1.4.1.2751.100.20.5.1 | RowdcscmdcPortbindingEntry | not-accessible | current | The index of this table is PortName |
| 1.3.6.1.4.1.2751.100.20.5.1.1 | ColumndcscmdcPortbindingPortName | read-only | current | Dcscm destination control multicast,The Port index of rule |
| 1.3.6.1.4.1.2751.100.20.5.1.2 | ColumndcscmdcPortbindingAclNumber | read-write | current | Dcscm destination control multicast,The Acl number of rule;0 means del the rule binded to port |
| 1.3.6.1.4.1.2751.100.20.6 | ScalardcscmscEnable | read-write | current | dcscm source control multicast is disable or enable |
| 1.3.6.1.4.1.2751.100.20.7 | NodedcscmscAcl | |||
| 1.3.6.1.4.1.2751.100.20.7.1 | ScalardcscmscAclNumber | read-write | current | |
| 1.3.6.1.4.1.2751.100.20.7.2 | ScalardcscmscAclSourceIp | read-write | current | Source ip address of acl entry |
| 1.3.6.1.4.1.2751.100.20.7.3 | ScalardcscmscAclSourceMask | read-write | current | Source Mask of acl entry |
| 1.3.6.1.4.1.2751.100.20.7.4 | ScalardcscmscAclDestinationIp | read-write | current | Destination ip address of acl entry, the destination ip must be a valid multicast group address. |
| 1.3.6.1.4.1.2751.100.20.7.5 | ScalardcscmscAclDestinationMask | read-write | current | Destination Mask of acl entry, the destination mask should meet the request of muticast group address. |
| 1.3.6.1.4.1.2751.100.20.7.6 | ScalardcscmscAclPermitOrDeny | read-write | current | acl entry permit or deny;0:deny; 1:permit; 2:del this acl |
| 1.3.6.1.4.1.2751.100.20.8 | TabledcscmscPortbindingTable | not-accessible | current | dcscm destination control multicast, Acl is binded to Port |
| 1.3.6.1.4.1.2751.100.20.8.1 | RowdcscmscPortbindingEntry | not-accessible | current | The index of this table is PortName |
| 1.3.6.1.4.1.2751.100.20.8.1.1 | ColumndcscmscPortbindingPortName | read-only | current | Dcscm source control multicast,The Port Number of rule |
| 1.3.6.1.4.1.2751.100.20.8.1.2 | ColumndcscmscPortbindingAclNumber | read-write | current | Dcscm source control multicast,The Acl number of rule ; 0 means to del the rule binded to port |
| 1.3.6.1.4.1.2751.100.20.9 | TabledcscmpcTable | not-accessible | current | dcscm policy multicast table |
| 1.3.6.1.4.1.2751.100.20.9.1 | RowdcscmpcEntry | not-accessible | current | The index of this table is dcscmpcSourceIp,dcscmpcSourceMasklen,dcscmpcDestinationIp,dcscmpcDestinationMasklen |
| 1.3.6.1.4.1.2751.100.20.9.1.1 | ColumndcscmpcSourceIp | read-only | current | source ip address of policy multicast |
| 1.3.6.1.4.1.2751.100.20.9.1.2 | ColumndcscmpcSourceMasklen | read-only | current | Mask length of source Ip |
| 1.3.6.1.4.1.2751.100.20.9.1.3 | ColumndcscmpcDestinationIp | read-only | current | Destination ip address of policy multicast,the destination ip must be a valid multicast group address. |
| 1.3.6.1.4.1.2751.100.20.9.1.4 | ColumndcscmpcDestinationMasklen | read-only | current | Mask length of destination Ip |
| 1.3.6.1.4.1.2751.100.20.9.1.5 | Columndcscmpccos | read-write | current | cos value of policy multicast; between 0 and 7 ;8 means to del the policy |
| 1.3.6.1.4.1.2751.100.21 | Nodedcscm6 | |||
| 1.3.6.1.4.1.2751.100.21.1 | Scalardcscm6dcEnable | read-write | current | dcscm6 destination control multicast is disable or enable |
| 1.3.6.1.4.1.2751.100.21.2 | Nodedcscm6dcAcl | |||
| 1.3.6.1.4.1.2751.100.21.2.1 | Scalardcscm6dcAclNumber | read-write | current | |
| 1.3.6.1.4.1.2751.100.21.2.2 | Scalardcscm6dcAclSourceIp | read-write | current | Source ip address of acl entry |
| 1.3.6.1.4.1.2751.100.21.2.3 | Scalardcscm6dcAclSourceMask | read-write | current | Source MaskLen of acl entry |
| 1.3.6.1.4.1.2751.100.21.2.4 | Scalardcscm6dcAclDestinationIp | read-write | current | Destination ip address of acl entry,the destination ip must be a valid multicast group address. |
| 1.3.6.1.4.1.2751.100.21.2.5 | Scalardcscm6dcAclDestinationMask | read-write | current | Destination MaskLen of acl entry ,the mask length should meet the request of multicast group address. |
| 1.3.6.1.4.1.2751.100.21.2.6 | Scalardcscm6dcAclPermitOrDeny | read-write | current | acl entry permit or deny; 0:deny; 1:permit; 2:del this acl |
| 1.3.6.1.4.1.2751.100.21.3 | Tabledcscm6VMacbindingTable | not-accessible | current | dcscm6 destination control multicast, Acl is binded to VMac |
| 1.3.6.1.4.1.2751.100.21.3.1 | Rowdcscm6VMacbindingEntry | not-accessible | current | The index of this table is Vlanid,MacAddress |
| 1.3.6.1.4.1.2751.100.21.3.1.1 | Columndcscm6VMacbindingVlanid | read-only | current | Dcscm6 destination control multicast,The vlanid of rule |
| 1.3.6.1.4.1.2751.100.21.3.1.2 | Columndcscm6VMacbindingMacAddr | read-only | current | Dcscm6 destination control multicast,The Mac Address of rule |
| 1.3.6.1.4.1.2751.100.21.3.1.3 | Columndcscm6VMacbindingAclNumber | read-write | current | Dcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to vmac |
| 1.3.6.1.4.1.2751.100.21.4 | Tabledcscm6SipbindingTable | not-accessible | current | dcscm6 destination control multicast, Acl is binded to Sip |
| 1.3.6.1.4.1.2751.100.21.4.1 | Rowdcscm6SipbindingEntry | not-accessible | current | The index of this table is Sourceip,SourceMaskLen |
| 1.3.6.1.4.1.2751.100.21.4.1.1 | Columndcscm6SipbindingSipAddress | read-only | current | Dcscm6 destination control multicast,The Source ip of rule |
| 1.3.6.1.4.1.2751.100.21.4.1.2 | Columndcscm6SipbindingSipMaskLen | read-only | current | Dcscm6 destination control multicast,The Source ip mask len of rule |
| 1.3.6.1.4.1.2751.100.21.4.1.3 | Columndcscm6SipbindingAclNumber | read-write | current | Dcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to sip |
| 1.3.6.1.4.1.2751.100.21.5 | Tabledcscm6dcPortbindingTable | not-accessible | current | dcscm6 destination control multicast, Acl is binded to Port |
| 1.3.6.1.4.1.2751.100.21.5.1 | Rowdcscm6dcPortbindingEntry | not-accessible | current | The index of this table is PortName |
| 1.3.6.1.4.1.2751.100.21.5.1.1 | Columndcscm6dcPortbindingPortName | read-only | current | Dcscm6 destination control multicast,The Port Number of rule |
| 1.3.6.1.4.1.2751.100.21.5.1.2 | Columndcscm6dcPortbindingAclNumber | read-write | current | Dcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to port |
| 1.3.6.1.4.1.2751.100.21.6 | Scalardcscm6scEnable | read-write | current | dcscm6 source control multicast is disable or enable |
| 1.3.6.1.4.1.2751.100.21.7 | Nodedcscm6scAcl | |||
| 1.3.6.1.4.1.2751.100.21.7.1 | Scalardcscm6scAclNumber | read-write | current | |
| 1.3.6.1.4.1.2751.100.21.7.2 | Scalardcscm6scAclSourceIp | read-write | current | Source ip address of acl entry |
| 1.3.6.1.4.1.2751.100.21.7.3 | Scalardcscm6scAclSourceMask | read-write | current | Source MaskLen of acl entry |
| 1.3.6.1.4.1.2751.100.21.7.4 | Scalardcscm6scAclDestinationIp | read-write | current | Destination ip address of acl entry,the destination ip must be a valid multicast group address. |
| 1.3.6.1.4.1.2751.100.21.7.5 | Scalardcscm6scAclDestinationMask | read-write | current | Destination MaskLen of acl entry ,the mask length should meet the request of multicast group address. |
| 1.3.6.1.4.1.2751.100.21.7.6 | Scalardcscm6scAclPermitOrDeny | read-write | current | acl entry permit or deny; 0:deny; 1:permit; 2:del this acl |
| 1.3.6.1.4.1.2751.100.21.8 | Tabledcscm6scPortbindingTable | not-accessible | current | dcscm6 destination control multicast, Acl is binded to Port |
| 1.3.6.1.4.1.2751.100.21.8.1 | Rowdcscm6scPortbindingEntry | not-accessible | current | The index of this table is PortName |
| 1.3.6.1.4.1.2751.100.21.8.1.1 | Columndcscm6scPortbindingPortName | read-only | current | Dcscm6 source control multicast,The Port Number of rule |
| 1.3.6.1.4.1.2751.100.21.8.1.2 | Columndcscm6scPortbindingAclNumber | read-write | current | Dcscm6 source control multicast,The Acl number of rule,0 means to del the rule binded to port |
| 1.3.6.1.4.1.2751.100.21.9 | Tabledcscm6pcTable | not-accessible | current | dcscm6 policy multicast table |
| 1.3.6.1.4.1.2751.100.21.9.1 | Rowdcscm6pcEntry | not-accessible | current | The index of this table is dcscm6pcSourceIp,dcscm6pcSourceMask,dcscm6pcDestinationIp,dcscm6pcDestinationMask |
| 1.3.6.1.4.1.2751.100.21.9.1.1 | Columndcscm6pcSourceIp | read-only | current | source ip address of policy multicast |
| 1.3.6.1.4.1.2751.100.21.9.1.2 | Columndcscm6pcSourceMask | read-only | current | Source MaskLen of policy multicast |
| 1.3.6.1.4.1.2751.100.21.9.1.3 | Columndcscm6pcDestinationIp | read-only | current | Destination ip address of policy multicast |
| 1.3.6.1.4.1.2751.100.21.9.1.4 | Columndcscm6pcDestinationMask | read-only | current | Destination MaskLen of policy multicast |
| 1.3.6.1.4.1.2751.100.21.9.1.5 | Columndcscm6pccos | read-write | current | cos value of policy multicast; between 0 and 7 ;8 means to del the policy |
| 1.3.6.1.4.1.2751.100.22 | NodeprClusterv2 | |||
| 1.3.6.1.4.1.2751.100.22.1 | Nodeclusterv2Base | |||
| 1.3.6.1.4.1.2751.100.22.1.1 | Scalarclusterv2BaseKey | read-write | current | cluster run switch,set the key word only while the cluster is not running and you should set it with set clusterv2BaseRun. |
| 1.3.6.1.4.1.2751.100.22.1.2 | Scalarclusterv2BaseVlan | read-write | current | cluster run switch,set the Vlan only when the cluster is not running and you should set it with set clusterv2BaseRun. if get result is 0 that the cluser is not… |
| 1.3.6.1.4.1.2751.100.22.1.3 | Scalarclusterv2BaseRun | read-write | current | cluster run switch,set the key word and vlan id or stop the cluster. |
| 1.3.6.1.4.1.2751.100.22.1.4 | Scalarclusterv2BaseRole | read-only | current | The role of the device. none means cluster device isn't running. |
| 1.3.6.1.4.1.2751.100.22.1.5 | Scalarclusterv2BaseVersion | read-only | current | version of cluster. |
| 1.3.6.1.4.1.2751.100.22.1.6 | Scalarclusterv2BaseMaxNumberOfMembers | read-only | current | The maximum number of cluster members allowed in the cluster. The command switch is considered as a cluster member also. |
| 1.3.6.1.4.1.2751.100.22.1.7 | Scalarclusterv2BaseMaxNumberOfSwitches | read-only | current | The maximum number of cluster switches allowed in the cluster. The Candidates include commander,candidate and member. |
| 1.3.6.1.4.1.2751.100.22.2 | Nodeclusterv2Create | |||
| 1.3.6.1.4.1.2751.100.22.2.1 | Scalarclusterv2CreateIPPool | read-write | current | ip pool.Valid cluster ip-pool format like as 10.x.x.x,default is 10.254.254.1 . if get result is 0 that the cluser is not running! set it only on the device is… |
| 1.3.6.1.4.1.2751.100.22.2.2 | Scalarclusterv2CreateName | read-write | current | create the clustername while create the cluster commander, set it only on the device is not commander and should set it with set clusterv2CreateCmdrOperate. |
| 1.3.6.1.4.1.2751.100.22.2.3 | Scalarclusterv2CreateCmdrOperate | read-write | current | if set create ,operation is to build cluster according to clusterv2CreateClusterIPPool/clusterv2StatusClusterName. if set destroy , operation is try to clear t… |
| 1.3.6.1.4.1.2751.100.22.3 | Nodeclusterv2Status | |||
| 1.3.6.1.4.1.2751.100.22.3.1 | Scalarclusterv2StatusClusterName | read-write | current | The name of the cluster.Set only on the device is not commander.The default is NULL. |
| 1.3.6.1.4.1.2751.100.22.3.2 | Scalarclusterv2StatusKeepalive | read-write | current | cluster keepalive interval(3-30 second). if get result is 0 that the cluser is not running! |
| 1.3.6.1.4.1.2751.100.22.3.3 | Scalarclusterv2StatusLoss-count | read-write | current | cluster the max(1-10) loss-count packet during the keeplive interval. if get result is 0 that the cluser is not running! |
| 1.3.6.1.4.1.2751.100.22.4 | Nodeclusterv2Commander | |||
| 1.3.6.1.4.1.2751.100.22.4.1 | Scalarclusterv2CommanderAutoAddMem | read-write | current | auto add mem switch |
| 1.3.6.1.4.1.2751.100.22.4.2 | Scalarclusterv2MemberCounter | read-only | current | member number on commander,read only on commander or will return 65535. |
| 1.3.6.1.4.1.2751.100.22.4.3 | Tableclusterv2MemberTable | not-accessible | current | This table contains one row per cluster member, including the command switch,read only on commander. |
| 1.3.6.1.4.1.2751.100.22.4.3.1 | Rowclusterv2MemberEntry | not-accessible | current | An entry containing cluster management information applicable to a particular cluster member. |
| 1.3.6.1.4.1.2751.100.22.4.3.1.1 | Columnclusterv2MemberNumber | read-only | current | An arbitrary value which uniquely identifies the cluster member switch number. It ranges from 1 to clusterv2StatusMaxNumberOfMembers,read only on commander. |
| 1.3.6.1.4.1.2751.100.22.4.3.1.2 | Columnclusterv2MemberIpAddress | read-only | current | The management ip address of the member device. |
| 1.3.6.1.4.1.2751.100.22.4.3.1.3 | Columnclusterv2MemberOperStatus | read-only | current | The status of cluster management connectivity between the command switch and a cluster member. Cluster management connectivity is determined by the exchange of… |
| 1.3.6.1.4.1.2751.100.22.4.3.1.4 | Columnclusterv2MemberMacAddress | read-only | current | The management MAC address of the member device. |
| 1.3.6.1.4.1.2751.100.22.4.3.1.5 | Columnclusterv2MemberHostName | read-only | current | |
| 1.3.6.1.4.1.2751.100.22.4.3.1.6 | Columnclusterv2MemberDeviceType | read-only | current | deviceType such as 5526S, 2008A etc |
| 1.3.6.1.4.1.2751.100.22.4.4 | Scalarclusterv2CandidateCounter | read-only | current | candidate number on commander,read only on commander or will return 65535. |
| 1.3.6.1.4.1.2751.100.22.4.5 | Tableclusterv2CandidateTable | not-accessible | current | This table contains one row per cluster candidate, A cluster candidate is a device that is currently eligible to be added to the cluster of a command switch. A… |
| 1.3.6.1.4.1.2751.100.22.4.5.1 | Rowclusterv2CandidateEntry | not-accessible | current | An entry pertaining to a single candidate device. |
| 1.3.6.1.4.1.2751.100.22.4.5.1.1 | Columnclusterv2CandidateId | read-only | current | The candidate id. |
| 1.3.6.1.4.1.2751.100.22.4.5.1.2 | Columnclusterv2CandidateMacAddress | read-only | current | The MAC address of a device qualified to to be a cluster member of the command switch cluster. |
| 1.3.6.1.4.1.2751.100.22.4.5.1.3 | Columnclusterv2CandidateHostName | read-only | current | |
| 1.3.6.1.4.1.2751.100.22.4.5.1.4 | Columnclusterv2CandidateDeviceType | read-only | current | |
| 1.3.6.1.4.1.2751.100.22.4.6 | Scalarclusterv2RebootMem | read-write | current | Operation is to reboot the specified member.you can select more member one time, the value connected with '-' or ';',the string len is 1-30 .set only on comman… |
| 1.3.6.1.4.1.2751.100.23 | Nodedns | |||
| 1.3.6.1.4.1.2751.100.23.1 | ScalardnsEnable | read-write | current | Enable or disable dns dynamic domain resolving. |
| 1.3.6.1.4.1.2751.100.23.2 | TablednsServerTable | not-accessible | current | The dns server list table which consists of a sequence of 'dnsServerEntry' items which describe the configured dns server IP information. |
| 1.3.6.1.4.1.2751.100.23.2.1 | RowdnsServerEntry | not-accessible | current | An entry in the dnsServerTable containing the dns server IP. |
| 1.3.6.1.4.1.2751.100.23.2.1.1 | ColumndnsServerInetAddrType | not-accessible | current | The IP address type of dnsServerEntry. This value applies to dnsServerIpAddr. |
| 1.3.6.1.4.1.2751.100.23.2.1.2 | ColumndnsServerIpAddr | read-only | current | The dns server IP address with 'dnsServerInetAddrType' to indicate the IP address type(IPv4 or IPv6). |
| 1.3.6.1.4.1.2751.100.23.2.1.3 | ColumndnsServerPriority | read-create | current | Current Priority of the dns server. |
| 1.3.6.1.4.1.2751.100.23.2.1.4 | ColumndnsServerStatus | read-create | current | Current state of the dns server. |
| 1.3.6.1.4.1.2751.100.23.3 | TablednsDomainSuffixTable | not-accessible | current | The dns domain suffix table which consists of a sequence of 'dnsDomainSuffixEntry' items which describe the configured dns domain suffix information. |
| 1.3.6.1.4.1.2751.100.23.3.1 | RowdnsDomainSuffixEntry | not-accessible | current | An entry in the dnsDomainSuffixTable containing the dns domain suffix. |
| 1.3.6.1.4.1.2751.100.23.3.1.1 | ColumndnsDomainSuffix | read-only | current | The dns domain suffix(e.g. commpany.com). |
| 1.3.6.1.4.1.2751.100.23.3.1.2 | ColumndnsDomainSuffixStatus | read-create | current | Current state of the dns domain suffix. |
| 1.3.6.1.4.1.2751.100.23.4 | TablednsDynHostTable | not-accessible | current | The dns dynamic host table which consists of a sequence of 'dnsDynHostEntry' items which describe the resolved dns dynamic host information. |
| 1.3.6.1.4.1.2751.100.23.4.1 | RowdnsDynHostEntry | not-accessible | current | An entry in the dnsDynHostTable containing the dns dynamic host information. |
| 1.3.6.1.4.1.2751.100.23.4.1.1 | ColumndnsDynHostIndex | not-accessible | current | Index of position in the cache |
| 1.3.6.1.4.1.2751.100.23.4.1.2 | ColumndnsDynHostName | read-only | current | The dns dynamic host name(e.g. www.sina.com.cn). |
| 1.3.6.1.4.1.2751.100.23.4.1.3 | ColumndnsDynHostIpAddr | read-only | current | The dns dynamic host's IP address with 'dnsDynHostInetAddrType' to indicate the IP address type(IPv4 or IPv6). |
| 1.3.6.1.4.1.2751.100.23.4.1.4 | ColumndnsDynHostTtl | read-only | current | The dns dynamic host's living time(seconds). |
| 1.3.6.1.4.1.2751.100.25 | NodentpSnmpMIB | |||
| 1.3.6.1.4.1.2751.100.25.1 | NodentpSnmpMIBObjects | |||
| 1.3.6.1.4.1.2751.100.25.1.1 | NodentpEntInfo | |||
| 1.3.6.1.4.1.2751.100.25.1.1.1 | ScalarntpEntSoftwareName | read-only | current | The product name of the installed NTP version. |
| 1.3.6.1.4.1.2751.100.25.1.1.2 | ScalarntpEntSoftwareVersion | read-only | current | The software version of the installed NTP implementation. |
| 1.3.6.1.4.1.2751.100.25.1.1.4 | ScalarntpEntSoftwareVendor | read-only | current | The vendor/author of the installed NTP version. |
| 1.3.6.1.4.1.2751.100.25.1.1.5 | ScalarntpEntSystemType | read-only | current | General hardware/os platform information. |
| 1.3.6.1.4.1.2751.100.25.1.1.6 | ScalarntpEntTimeResolution | read-only | current | A string describing the time resolution of the running NTP implementation. |
| 1.3.6.1.4.1.2751.100.25.1.1.9 | ScalarntpEntTimePrecision | read-only | current | The entity's precision in integer format. |
| 1.3.6.1.4.1.2751.100.25.1.2 | NodentpEntStatus | |||
| 1.3.6.1.4.1.2751.100.25.1.2.1 | ScalarntpEntStatusCurrentMode | read-only | current | The actual mode of NTP as a string |
| 1.3.6.1.4.1.2751.100.25.1.2.2 | ScalarntpEntStatusCurrentModeVal | read-only | current | The current mode of the NTP as integer value. |
| 1.3.6.1.4.1.2751.100.25.1.2.3 | ScalarntpEntStatusStratum | read-only | current | The NTP entity's own stratum value. |
| 1.3.6.1.4.1.2751.100.25.1.2.4 | ScalarntpEntStatusActiveRefSourceId | read-only | current | The association ID of the current syspeer. |
| 1.3.6.1.4.1.2751.100.25.1.2.5 | ScalarntpEntStatusActiveRefSourceName | read-only | current | The hostname/descriptive name of the current reference source selected as syspeer. |
| 1.3.6.1.4.1.2751.100.25.1.2.7 | ScalarntpEntStatusNumberOfRefSources | read-only | current | The number of reference sources configured for NTP. |
| 1.3.6.1.4.1.2751.100.25.1.2.10 | ScalarntpEntStatusDateTime | read-only | current | |
| 1.3.6.1.4.1.2751.100.25.1.2.13 | ScalarntpEntStatusInPkts | read-only | current | The total number of NTP messages delivered to the NTP entity from the transport service. |
| 1.3.6.1.4.1.2751.100.25.1.2.14 | ScalarntpEntStatusOutPkts | read-only | current | The total number of NTP messages delivered to the transport service by this NTP entity. |
| 1.3.6.1.4.1.2751.100.25.1.2.15 | ScalarntpEntStatusBadVersion | read-only | current | The total number of NTP messages which were delivered to this NTP entity and were for an unsupported NTP version. |
| 1.3.6.1.4.1.2751.100.25.1.2.16 | ScalarntpEntStatusProtocolError | read-only | current | The total number of NTP messages which were delivered to this NTP entity and this entity was not able to process due to an NTP protocol error. |
| 1.3.6.1.4.1.2751.100.25.6 | NodentpEntConformance | |||
| 1.3.6.1.4.1.2751.100.25.6.1 | NodentpEntCompliances | |||
| 1.3.6.1.4.1.2751.100.25.6.1.1 | CompliancentpEntNTPCompliance | current | The compliance statement for SNMP entities which use NTP and implement the NTP MIB | |
| 1.3.6.1.4.1.2751.100.25.6.1.2 | CompliancentpEntSNTPCompliance | current | The compliance statement for SNMP entities which use SNTP and implement the NTP MIB | |
| 1.3.6.1.4.1.2751.100.25.6.2 | NodentpEntGroups | |||
| 1.3.6.1.4.1.2751.100.25.6.2.1 | GroupntpEntObjectsGroup1 | current | A collection of objects for the NTP MIB that all NTP or SNTP entities should implement. | |
| 1.3.6.1.4.1.2751.100.25.6.2.2 | GroupntpEntObjectsGroup2 | current | A collection of objects for the NTP MIB that are optional for NTP or SNTP entities to implement. | |
| 1.3.6.1.4.1.2751.100.26 | NodepriPoeConfig | |||
| 1.3.6.1.4.1.2751.100.26.1 | ScalarpoeSystemEnable | read-write | current | The power inline global switch. Enable expresses it is turned on, while disable indicates that off. |
| 1.3.6.1.4.1.2751.100.26.2 | ScalarpoeMaxPower | read-write | current | The power inline global available power whitch cannot be exceeded by the total power of all PDs. |
| 1.3.6.1.4.1.2751.100.26.3 | ScalarpoePoliceEnable | read-write | current | The power inline power mamagement switch. Enable expresses it is in priority-policy mode, while disable indicates that in first-in-first-get mode. |
| 1.3.6.1.4.1.2751.100.26.4 | ScalarpoeLegacyEnable | read-write | current | The power inline nonstandard PD detect switch. Enable expresses nonstandard PD can be detected, while disable indicates that cannot be detected. |
| 1.3.6.1.4.1.2751.100.26.5 | ScalarpoeDisconnect | read-only | current | The power inline disconnection mode. |
| 1.3.6.1.4.1.2751.100.26.6 | ScalarpoeCurrentPower | read-only | current | The power inline current export power. It is a real time value. |
| 1.3.6.1.4.1.2751.100.26.7 | ScalarpoePortMode | read-only | current | The power inline power supply mode. |
| 1.3.6.1.4.1.2751.100.26.8 | ScalarpoeSoftwareVersion | read-only | current | The power inline software version. |
| 1.3.6.1.4.1.2751.100.26.9 | ScalarpoeHardwareVersion | read-only | current | The power inline hardware version. |
| 1.3.6.1.4.1.2751.100.26.10 | TablepoePortConfigTable | not-accessible | current | The power inline port configuration table |
| 1.3.6.1.4.1.2751.100.26.10.1 | RowpoePortConfigEntry | not-accessible | current | The power inline configuration in port. |
| 1.3.6.1.4.1.2751.100.26.10.1.1 | ColumnpoePortIndex | not-accessible | current | The power inline port index. |
| 1.3.6.1.4.1.2751.100.26.10.1.2 | ColumnpoePortStatus | read-write | current | The power inline port switch. Enable expresses it is turned on, while disable indicates that off.enableAuto(1) turn on the auto-mode,enableStatic(2) turn on th… |
| 1.3.6.1.4.1.2751.100.26.10.1.3 | ColumnpoePortPriority | read-write | current | The power inline port priority. |
| 1.3.6.1.4.1.2751.100.26.10.1.4 | ColumnpoePortMaxPower | read-write | current | The power inline port available power whitch cannot be exceeded by the connected PD. |
| 1.3.6.1.4.1.2751.100.26.10.1.5 | ColumnpoePortCurrentPower | read-only | current | The power inline port used power. It is a real time value. |
| 1.3.6.1.4.1.2751.100.26.10.1.6 | ColumnpoePortCurrentCurrent | read-only | current | The power inline port export current. It is a real time value. |
| 1.3.6.1.4.1.2751.100.26.10.1.7 | ColumnpoePortCurrentVoltage | read-only | current | The power inline port export voltage. It is a real time value. |
| 1.3.6.1.4.1.2751.100.26.10.1.8 | ColumnpoePortPdStatus | read-only | current | The power inline detect status. on(1):PD is connected and natural powered, off(2):PD is not connected, faulty(3):error, deny(4):power is low or high, force(5):… |
| 1.3.6.1.4.1.2751.100.26.10.1.9 | ColumnpoePortPdClass | read-only | current | The connected PD class of power inline |
| 1.3.6.1.4.1.2751.100.26.11 | ScalarpoeHighInrushEnable | read-write | current | The power inline high-inrush switch. Enable expresses it is turned on, while disable indicates that off. |
| 1.3.6.1.4.1.2751.100.27 | NodepriQos2 | |||
| 1.3.6.1.4.1.2751.100.27.1 | Nodeqos2 | |||
| 1.3.6.1.4.1.2751.100.27.1.1 | Nodeqos2MapCostoIntp | |||
| 1.3.6.1.4.1.2751.100.27.1.1.1 | Scalarqos2MapCostoIntp1 | read-create | current | COS to IntPrio map,IntPrio1<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.1.2 | Scalarqos2MapCostoIntp2 | read-create | current | COS to IntPrio map,IntPrio2<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.1.3 | Scalarqos2MapCostoIntp3 | read-create | current | COS to IntPrio map,IntPrio1<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.1.4 | Scalarqos2MapCostoIntp4 | read-create | current | COS to IntPrio map,IntPrio1<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.1.5 | Scalarqos2MapCostoIntp5 | read-create | current | COS to IntPrio map,IntPrio1<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.1.6 | Scalarqos2MapCostoIntp6 | read-create | current | COS to IntPrio map,IntPrio1<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.1.7 | Scalarqos2MapCostoIntp7 | read-create | current | COS to IntPrio map,IntPrio1<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.1.8 | Scalarqos2MapCostoIntp8 | read-create | current | COS to IntPrio map,IntPrio1<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.1.9 | Scalarqos2MapCostoIntpStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.2 | Nodeqos2MapCostoDP | |||
| 1.3.6.1.4.1.2751.100.27.1.2.1 | Scalarqos2MapCostoDP1 | read-create | current | COS to drop precedence map,Drop Precedence1<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.2.2 | Scalarqos2MapCostoDP2 | read-create | current | COS to drop precedence map,Drop Precedence2<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.2.3 | Scalarqos2MapCostoDP3 | read-create | current | COS to drop precedence map,Drop Precedence3<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.2.4 | Scalarqos2MapCostoDP4 | read-create | current | COS to drop precedence map,Drop Precedence4<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.2.5 | Scalarqos2MapCostoDP5 | read-create | current | COS to drop precedence map,Drop Precedence5<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.2.6 | Scalarqos2MapCostoDP6 | read-create | current | COS to drop precedence map,Drop Precedence6<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.2.7 | Scalarqos2MapCostoDP7 | read-create | current | COS to drop precedence map,Drop Precedence7<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.2.8 | Scalarqos2MapCostoDP8 | read-create | current | COS to drop precedence map,Drop Precedence8<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.2.9 | Scalarqos2MapCostoDPStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.3 | Nodeqos2MapDSCPtoDSCP | |||
| 1.3.6.1.4.1.2751.100.27.1.3.1 | Scalarqos2MapDSCPtoDSCP1 | read-create | current | DSCP to DSCP map, DSCP1<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.3.2 | Scalarqos2MapDSCPtoDSCP2 | read-create | current | DSCP to DSCP map, DSCP2<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.3.3 | Scalarqos2MapDSCPtoDSCP3 | read-create | current | DSCP to DSCP map, DSCP3<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.3.4 | Scalarqos2MapDSCPtoDSCP4 | read-create | current | DSCP to DSCP map, DSCP4<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.3.5 | Scalarqos2MapDSCPtoDSCP5 | read-create | current | DSCP to DSCP map, DSCP5<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.3.6 | Scalarqos2MapDSCPtoDSCP6 | read-create | current | DSCP to DSCP map, DSCP6<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.3.7 | Scalarqos2MapDSCPtoDSCP7 | read-create | current | DSCP to DSCP map, DSCP7<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.3.8 | Scalarqos2MapDSCPtoDSCP8 | read-create | current | DSCP to DSCP map, DSCP8<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.3.9 | Scalarqos2MapDSCPtoDSCPoutDSCP | read-create | current | DSCP to DSCP map, outDSCP<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.3.10 | Scalarqos2MapDSCPtoDSCPStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.4 | Nodeqos2MapDSCPtoIntp | |||
| 1.3.6.1.4.1.2751.100.27.1.4.1 | Scalarqos2MapDSCPtoIntp1 | read-create | current | DSCP to Intp map, DSCP1<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.4.2 | Scalarqos2MapDSCPtoIntp2 | read-create | current | DSCP to Intp map, DSCP2<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.4.3 | Scalarqos2MapDSCPtoIntp3 | read-create | current | DSCP to Intp map, DSCP3<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.4.4 | Scalarqos2MapDSCPtoIntp4 | read-create | current | DSCP to Intp map, DSCP4<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.4.5 | Scalarqos2MapDSCPtoIntp5 | read-create | current | DSCP to Intp map, DSCP5<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.4.6 | Scalarqos2MapDSCPtoIntp6 | read-create | current | DSCP to Intp map, DSCP6<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.4.7 | Scalarqos2MapDSCPtoIntp7 | read-create | current | DSCP to Intp map, DSCP7<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.4.8 | Scalarqos2MapDSCPtoIntp8 | read-create | current | DSCP to Intp map, DSCP8<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.4.9 | Scalarqos2MapDSCPtoIntpIntPriovalue | read-create | current | DSCP to Intp map, IntPrio value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.4.10 | Scalarqos2MapDSCPtoIntpStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.5 | Nodeqos2MapDSCPtoDP | |||
| 1.3.6.1.4.1.2751.100.27.1.5.1 | Scalarqos2MapDSCPtoDP1 | read-create | current | DSCP to DP map, DSCP1<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.5.2 | Scalarqos2MapDSCPtoDP2 | read-create | current | DSCP to DP map, DSCP2<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.5.3 | Scalarqos2MapDSCPtoDP3 | read-create | current | DSCP to DP map, DSCP3<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.5.4 | Scalarqos2MapDSCPtoDP4 | read-create | current | DSCP to DP map, DSCP4<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.5.5 | Scalarqos2MapDSCPtoDP5 | read-create | current | DSCP to DP map, DSCP5<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.5.6 | Scalarqos2MapDSCPtoDP6 | read-create | current | DSCP to DP map, DSCP6<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.5.7 | Scalarqos2MapDSCPtoDP7 | read-create | current | DSCP to DP map, DSCP7<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.5.8 | Scalarqos2MapDSCPtoDP8 | read-create | current | DSCP to DP map, DSCP8<0-63>. |
| 1.3.6.1.4.1.2751.100.27.1.5.9 | Scalarqos2MapDSCPtoDPvalue | read-create | current | DSCP to DP map, Drop Precedence value<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.5.10 | Scalarqos2MapDSCPtoDPStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.6 | Nodeqos2MapExptoIntp | |||
| 1.3.6.1.4.1.2751.100.27.1.6.1 | Scalarqos2MapExptoIntp1 | read-create | current | EXP to Intp map, IntPrio1 value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.6.2 | Scalarqos2MapExptoIntp2 | read-create | current | EXP to Intp map, IntPrio2 value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.6.3 | Scalarqos2MapExptoIntp3 | read-create | current | EXP to Intp map, IntPrio3 value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.6.4 | Scalarqos2MapExptoIntp4 | read-create | current | EXP to Intp map, IntPrio4 value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.6.5 | Scalarqos2MapExptoIntp5 | read-create | current | EXP to Intp map, IntPrio5 value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.6.6 | Scalarqos2MapExptoIntp6 | read-create | current | EXP to Intp map, IntPrio6 value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.6.7 | Scalarqos2MapExptoIntp7 | read-create | current | EXP to Intp map, IntPrio7 value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.6.8 | Scalarqos2MapExptoIntp8 | read-create | current | EXP to Intp map, IntPrio8 value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.6.9 | Scalarqos2MapExptoIntpStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.7 | Nodeqos2MapExptoDP | |||
| 1.3.6.1.4.1.2751.100.27.1.7.1 | Scalarqos2MapExptoDP1 | read-create | current | EXP to DP map, Drop Precedence value<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.7.2 | Scalarqos2MapExptoDP2 | read-create | current | EXP to DP map, Drop Precedence value<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.7.3 | Scalarqos2MapExptoDP3 | read-create | current | EXP to DP map, Drop Precedence value<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.7.4 | Scalarqos2MapExptoDP4 | read-create | current | EXP to DP map, Drop Precedence value<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.7.5 | Scalarqos2MapExptoDP5 | read-create | current | EXP to DP map, Drop Precedence value<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.7.6 | Scalarqos2MapExptoDP6 | read-create | current | EXP to DP map, Drop Precedence value<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.7.7 | Scalarqos2MapExptoDP7 | read-create | current | EXP to DP map, Drop Precedence value<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.7.8 | Scalarqos2MapExptoDP8 | read-create | current | EXP to DP map, Drop Precedence value<0-2>. |
| 1.3.6.1.4.1.2751.100.27.1.7.9 | Scalarqos2MapExptoDPStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.8 | Nodeqos2MapIntptoDSCP | |||
| 1.3.6.1.4.1.2751.100.27.1.8.1 | Scalarqos2MapIntptoDSCP1 | read-create | current | Intp to DSCP map, IntPrio value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.8.2 | Scalarqos2MapIntptoDSCP2 | read-create | current | Intp to DSCP map, IntPrio value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.8.3 | Scalarqos2MapIntptoDSCP3 | read-create | current | Intp to DSCP map, IntPrio value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.8.4 | Scalarqos2MapIntptoDSCP4 | read-create | current | Intp to DSCP map, IntPrio value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.8.5 | Scalarqos2MapIntptoDSCP5 | read-create | current | Intp to DSCP map, IntPrio value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.8.6 | Scalarqos2MapIntptoDSCP6 | read-create | current | Intp to DSCP map, IntPrio value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.8.7 | Scalarqos2MapIntptoDSCP7 | read-create | current | Intp to DSCP map, IntPrio value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.8.8 | Scalarqos2MapIntptoDSCP8 | read-create | current | Intp to DSCP map, IntPrio value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.8.9 | Scalarqos2MapIntptoDSCPStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.10 | Nodeqos2MapIntptoEXP | |||
| 1.3.6.1.4.1.2751.100.27.1.10.1 | Scalarqos2MapIntptoEXP1 | read-create | current | Intp to EXP map, EXP value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.10.2 | Scalarqos2MapIntptoEXP2 | read-create | current | Intp to EXP map, EXP value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.10.3 | Scalarqos2MapIntptoEXP3 | read-create | current | Intp to EXP map, EXP value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.10.4 | Scalarqos2MapIntptoEXP4 | read-create | current | Intp to EXP map, EXP value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.10.5 | Scalarqos2MapIntptoEXP5 | read-create | current | Intp to EXP map, EXP value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.10.6 | Scalarqos2MapIntptoEXP6 | read-create | current | Intp to EXP map, EXP value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.10.7 | Scalarqos2MapIntptoEXP7 | read-create | current | Intp to EXP map, EXP value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.10.8 | Scalarqos2MapIntptoEXP8 | read-create | current | Intp to EXP map, EXP value<0-7>. |
| 1.3.6.1.4.1.2751.100.27.1.10.9 | Scalarqos2MapIntptoEXPStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.11 | Nodeqos2AggregatePolicy | |||
| 1.3.6.1.4.1.2751.100.27.1.11.1 | Scalarqos2AggPolicyName | read-create | current | Aggregate policy name<1-64>. |
| 1.3.6.1.4.1.2751.100.27.1.11.2 | Scalarqos2AggPolicyCIRKbps | read-create | current | CIR(Committed Information Rate) Kbits per second <1-10000000>. |
| 1.3.6.1.4.1.2751.100.27.1.11.3 | Scalarqos2AggPolicyCBSKbps | read-create | current | CBS(Committed Burst Size) Kbits per second <1-1000000>. |
| 1.3.6.1.4.1.2751.100.27.1.11.4 | Scalarqos2AggPolicyPBSKbps | read-create | current | PBS(Peak Burst Size) Kbits per second <1-1000000>. |
| 1.3.6.1.4.1.2751.100.27.1.11.5 | Scalarqos2AggPolicyPIRKbps | read-create | current | PIR(Peak Information Rate) Kbits per second <1-10000000>. |
| 1.3.6.1.4.1.2751.100.27.1.11.6 | Scalarqos2AggPolicyConformAction | read-create | current | conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed… |
| 1.3.6.1.4.1.2751.100.27.1.11.7 | Scalarqos2AggPolicyConformActionChangeValue | read-create | current | If conform-action is set-dscp-transmit(2),the value is between 0-63; If conform-action is set-prec-transmit(3),the value is between 0-7; If conform-action is s… |
| 1.3.6.1.4.1.2751.100.27.1.11.8 | Scalarqos2AggPolicyExceedAction | read-create | current | conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed… |
| 1.3.6.1.4.1.2751.100.27.1.11.9 | Scalarqos2AggPolicyExceedActionChangeValue | read-create | current | If conform-action is set-dscp-transmit(2),the value is between 0-63; If conform-action is set-prec-transmit(3),the value is between 0-7; If conform-action is s… |
| 1.3.6.1.4.1.2751.100.27.1.11.10 | Scalarqos2AggPolicyViolateAction | read-create | current | conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed… |
| 1.3.6.1.4.1.2751.100.27.1.11.11 | Scalarqos2AggPolicyViolateActionChangeValue | read-create | current | If conform-action is set-dscp-transmit(2),the value is between 0-63; If conform-action is set-prec-transmit(3),the value is between 0-7; If conform-action is s… |
| 1.3.6.1.4.1.2751.100.27.1.11.12 | Scalarqos2AggPolicyStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.12 | Tableqos2ServicePolicyTable | not-accessible | current | QoS service policy table. |
| 1.3.6.1.4.1.2751.100.27.1.12.1 | Rowqos2ServicePolicyEntry | not-accessible | current | QoS service policy table. |
| 1.3.6.1.4.1.2751.100.27.1.12.1.1 | Columnqos2PolicyMapName | read-only | current | Policy map name<1-64>. |
| 1.3.6.1.4.1.2751.100.27.1.12.1.2 | Columnqos2ServicePolicyVlanList | read-only | current | Vlan list. |
| 1.3.6.1.4.1.2751.100.27.1.12.1.3 | Columnqos2ServicePolicyStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.13 | Nodeqos2PortTable | |||
| 1.3.6.1.4.1.2751.100.27.1.13.1 | Scalarqos2PortIndex | read-create | current | port Index |
| 1.3.6.1.4.1.2751.100.27.1.13.2 | Scalarqos2PortType | read-create | current | the relation between qosPortType and CLI: 0 mls qos trust {cos |dscp }; 1 mls qos cos {<default-cos>}; 2 service-policy input WORD; 3 mls qos queue {<queue id>… |
| 1.3.6.1.4.1.2751.100.27.1.13.3 | Scalarqos2PortCos | read-create | current | port default cos value |
| 1.3.6.1.4.1.2751.100.27.1.13.4 | Scalarqos2PortTrust | read-create | current | Configure port trust. cos(0),mls qos trust cos; dscp(1),mls qos trust dscp. |
| 1.3.6.1.4.1.2751.100.27.1.13.5 | Scalarqos2PortPolicy | read-create | current | The corresponding CLI:service-policy input WORD. |
| 1.3.6.1.4.1.2751.100.27.1.13.6 | Scalarqos2PortQueueBandwidth | read-create | current | The corresponding CLI:mls qos queue {<queue id>} bandwidth {<MinBandwidth> <MaxBandwidth>}. |
| 1.3.6.1.4.1.2751.100.27.1.13.7 | Scalarqos2PortQueueAlgorithm | read-create | current | The corresponding CLI:mls qos queue algorithm {sp |wdrr |wrr }. |
| 1.3.6.1.4.1.2751.100.27.1.13.8 | Scalarqos2PortQueueWdrr | read-create | current | The corresponding CLI:mls qos queue wdrr weight {<Queue1 bandwidth> <Queue2 bandwidth> <Queue3 bandwidth> <Queue4 bandwidth> <Queue5 bandwidth> <Queue6 bandwid… |
| 1.3.6.1.4.1.2751.100.27.1.13.9 | Scalarqos2PortQueueWrr | read-create | current | The corresponding CLI:mls qos queue wrr weight {<Queue1 weight> <Queue2 weight> <Queue3 weight> <Queue4 weight> <Queue5 weight> <Queue6 weight> <Queue7 weight>… |
| 1.3.6.1.4.1.2751.100.27.1.13.10 | Scalarqos2PortStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.14 | Nodeqos2ClassMapTable | |||
| 1.3.6.1.4.1.2751.100.27.1.14.1 | Scalarqos2ClassMapName | read-create | current | classmap name |
| 1.3.6.1.4.1.2751.100.27.1.14.2 | Scalarqos2ClassMapType | read-create | current | 0 class-map <class-map-name>,index is classmapname; 1 match access-group <acl-index-or-name>,need qos2ClassMapAccessGroup cooperation; 2 match ip dscp <dscp-li… |
| 1.3.6.1.4.1.2751.100.27.1.14.3 | Scalarqos2ClassMapAccessGroup | read-create | current | Match specify access-group (name or number). This object be configured only if qosClassMapType in the same row is accessGroup(1). |
| 1.3.6.1.4.1.2751.100.27.1.14.4 | Scalarqos2ClassMapDscp | read-create | current | Match specify Dscp. This object be configured only if qosClassMapType in the same row is dscp(2). |
| 1.3.6.1.4.1.2751.100.27.1.14.5 | Scalarqos2ClassMapV6Dscp | read-create | current | Match specify ipv6 Dscp. This object be configured only if qosClassMapType in the same row is v6dscp(5). |
| 1.3.6.1.4.1.2751.100.27.1.14.6 | Scalarqos2ClassMapIpPre | read-create | current | Match specify Ip Precedence. This object be configured only if qosClassMapType in the same row is ippre(3). |
| 1.3.6.1.4.1.2751.100.27.1.14.7 | Scalarqos2ClassMapV6AccGroup | read-create | current | Match specify Ipv6 Access-Group. This object be configured only if qosClassMapType in the same row is v6AccessGroup(8). |
| 1.3.6.1.4.1.2751.100.27.1.14.8 | Scalarqos2ClassMapV6Flow | read-create | current | Match specify Ipv6 Flowlabel. This object be configured only if qosClassMapType in the same row is v6Flow(6). |
| 1.3.6.1.4.1.2751.100.27.1.14.9 | Scalarqos2ClassMapVlan | read-create | current | Match specify Vlan list . At most 8 vlan id. This object be configured only if qosClassMapType in the same row is vlan(4). |
| 1.3.6.1.4.1.2751.100.27.1.14.10 | Scalarqos2ClassMapCos | read-create | current | Match specify Cos . This object be configured only if qosClassMapType in the same row is cos(9). |
| 1.3.6.1.4.1.2751.100.27.1.14.11 | Scalarqos2ClassMapExp | read-create | current | Match specify MPLS EXP. This object be configured only if qosClassMapType in the same row is Exp(10). |
| 1.3.6.1.4.1.2751.100.27.1.14.12 | Scalarqos2ClassMapStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.15 | Nodeqos2PolicyTable | |||
| 1.3.6.1.4.1.2751.100.27.1.15.1 | Scalarqos2PolicyName | read-create | current | QoS Policy name |
| 1.3.6.1.4.1.2751.100.27.1.15.2 | Scalarqos2PolicyClassMap | read-create | current | Specify the classmap name.After a policy map is created, it can be associated to a class. So, if you want the class map to match the policy map,please setting … |
| 1.3.6.1.4.1.2751.100.27.1.15.3 | Scalarqos2PolicyInsertClassMap | read-create | current | Specify the position of classmap name. |
| 1.3.6.1.4.1.2751.100.27.1.15.4 | Scalarqos2PolicyType | read-create | current | the relation between qosPolicyType and CLI: 0 policy-map <policy-map-name>; 1 class <class-map-name>; 2 policy <bits_per_second> <normal_burst_bytes> [pir <pea… |
| 1.3.6.1.4.1.2751.100.27.1.15.5 | Scalarqos2PolicyCIRKbps | read-create | current | CIR(Committed Information Rate) Kbits per second <1-10000000>. |
| 1.3.6.1.4.1.2751.100.27.1.15.6 | Scalarqos2PolicyCBSKbps | read-create | current | CBS(Committed Burst Size) Kbits per second <1-1000000>. |
| 1.3.6.1.4.1.2751.100.27.1.15.7 | Scalarqos2PolicyPBSKbps | read-create | current | PBS(Peak Burst Size) Kbits per second <1-1000000>. |
| 1.3.6.1.4.1.2751.100.27.1.15.8 | Scalarqos2PolicyPIRKbps | read-create | current | PIR(Peak Information Rate) Kbits per second <1-10000000>. |
| 1.3.6.1.4.1.2751.100.27.1.15.9 | Scalarqos2PolicyConformActionChange | read-create | current | transmit(0): means send packets without any change; drop(1): means drop packets; set-dscp-transmit(2): send packets and remark dscp value; set-prec-transmit(3)… |
| 1.3.6.1.4.1.2751.100.27.1.15.10 | Scalarqos2PolicyConformActionChangeValue | read-create | current | If action is set-dscp-transmit(2),the value is between 0-63; else if action is set-prec-transmit(3),the value is between 0-7; else if action is set-cos-transmi… |
| 1.3.6.1.4.1.2751.100.27.1.15.11 | Scalarqos2PolicyExceedActionChange | read-create | current | transmit(0): means send packets without any change; drop(1): means drop packets; set-dscp-transmit(2): send packets and remark dscp value; set-prec-transmit(3)… |
| 1.3.6.1.4.1.2751.100.27.1.15.12 | Scalarqos2PolicyExceedActionChangeValue | read-create | current | If action is set-dscp-transmit(2),the value is between 0-63; else if action is set-prec-transmit(3),the value is between 0-7; else if action is set-cos-transmi… |
| 1.3.6.1.4.1.2751.100.27.1.15.13 | Scalarqos2PolicyViolateActionChange | read-create | current | transmit(0): means send packets without any change; drop(1): means drop packets; set-dscp-transmit(2): send packets and remark dscp value; set-prec-transmit(3)… |
| 1.3.6.1.4.1.2751.100.27.1.15.14 | Scalarqos2PolicyViolateActionChangeValue | read-create | current | If action is set-dscp-transmit(2),the value is between 0-63; else if action is set-prec-transmit(3),the value is between 0-7; else if action is set-cos-transmi… |
| 1.3.6.1.4.1.2751.100.27.1.15.15 | Scalarqos2PolicyAggregatePolicer | read-create | current | aggregate-policer-name. This object be configured only if qosPolicyType in the same row is aggregatePolicer(3). |
| 1.3.6.1.4.1.2751.100.27.1.15.16 | Scalarqos2PolicyStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.27.1.16 | Nodeqos2SetTable | |||
| 1.3.6.1.4.1.2751.100.27.1.16.1 | Scalarqos2SetPolicyMapName | read-create | current | QoS Policy name. |
| 1.3.6.1.4.1.2751.100.27.1.16.2 | Scalarqos2SetClassMapName | read-create | current | QoS class map name. |
| 1.3.6.1.4.1.2751.100.27.1.16.3 | Scalarqos2SetType | read-create | current | qos2SetType range:1,2,3,4,5,6 1 dscp Set IP DSCP (DiffServ CodePoints); 2 precedence Set IP precedence; 3 internal-priority Set internal-priority; 4 drop-prece… |
| 1.3.6.1.4.1.2751.100.27.1.16.4 | Scalarqos2SetDscp | read-create | current | remark dscp for the classified flow. |
| 1.3.6.1.4.1.2751.100.27.1.16.5 | Scalarqos2SetPrecedence | read-create | current | remark ip precedence for classified flow. |
| 1.3.6.1.4.1.2751.100.27.1.16.6 | Scalarqos2SetInternalPriority | read-create | current | remark internal priority for classified flow. |
| 1.3.6.1.4.1.2751.100.27.1.16.7 | Scalarqos2SetDropPrecedence | read-create | current | remark drop precedence for classified flow. |
| 1.3.6.1.4.1.2751.100.27.1.16.8 | Scalarqos2SetDefaultPBR | read-create | current | 0:no set default PBR for classified flow; 1:set default PBR for classified flow. |
| 1.3.6.1.4.1.2751.100.27.1.16.9 | Scalarqos2SetVrf | read-create | current | set vrf value for classified flow. |
| 1.3.6.1.4.1.2751.100.27.1.16.10 | Scalarqos2SetnextHop | read-create | current | set nexthop for classified flow. |
| 1.3.6.1.4.1.2751.100.27.1.16.11 | Scalarqos2Setv6nextHop | read-create | current | set IPv6 nexthop for classified flow |
| 1.3.6.1.4.1.2751.100.27.1.16.12 | Scalarqos2SetCos | read-create | current | remark cos for classified flow |
| 1.3.6.1.4.1.2751.100.27.1.16.13 | Scalarqos2SetStatus | read-create | current | Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. |
| 1.3.6.1.4.1.2751.100.28 | Nodedot1xMgt | |||
| 1.3.6.1.4.1.2751.100.28.1 | TablemabOnlineUserTable | not-accessible | current | Show the information of MAB users. |
| 1.3.6.1.4.1.2751.100.28.1.1 | RowmabOnlineUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.28.1.1.1 | ColumnmabOnlineUserIndex | not-accessible | current | The index of MAB user. |
| 1.3.6.1.4.1.2751.100.28.1.1.2 | ColumnmabOnlineUserMac | read-only | current | The mac of MAB user. |
| 1.3.6.1.4.1.2751.100.28.1.1.3 | ColumnmabOnlineUserName | read-only | current | The username of MAB user. |
| 1.3.6.1.4.1.2751.100.28.1.1.4 | ColumnmabOnlineUserPort | read-only | current | The port for MAB user. |
| 1.3.6.1.4.1.2751.100.28.1.1.5 | ColumnmabOnlineUserState | read-only | current | The state of MAB user. |
| 1.3.6.1.4.1.2751.100.28.2 | ScalarmabSetUserOffline | read-write | current | The mac of user offline. |
| 1.3.6.1.4.1.2751.100.28.3 | Tabledot1xOnlineUserTable | not-accessible | current | Show the information of dot1x users. |
| 1.3.6.1.4.1.2751.100.28.3.1 | Rowdot1xOnlineUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.2751.100.28.3.1.1 | Columndot1xOnlineUserIndex | not-accessible | current | The index of dot1x user. |
| 1.3.6.1.4.1.2751.100.28.3.1.2 | Columndot1xOnlineUserMac | read-only | current | The mac of dot1x user. |
| 1.3.6.1.4.1.2751.100.28.3.1.3 | Columndot1xOnlineUserName | read-only | current | The name of dot1x user. |
| 1.3.6.1.4.1.2751.100.28.3.1.4 | Columndot1xOnlineUserPort | read-only | current | The port for dot1x user. |
| 1.3.6.1.4.1.2751.100.28.3.1.5 | Columndot1xOnlineUserPortVlanid | read-only | current | The vlan id of dot1x user. |
| 1.3.6.1.4.1.2751.100.28.3.1.6 | Columndot1xOnlineUserPortMethod | read-only | current | The port method dot1x user. |
| 1.3.6.1.4.1.2751.100.28.3.1.7 | Columndot1xOnlineUserPortControl | read-only | current | The port control for dot1x user. |
| 1.3.6.1.4.1.2751.100.28.3.1.8 | Columndot1xOnlineUserState | read-only | current | The state of dot1x user. |
| 1.3.6.1.4.1.2751.100.28.4 | Scalardot1xSetUserOffline | read-write | current | The mac of user offline. |
| 1.3.6.1.4.1.2751.100.29 | NodeportMacCountLimit | |||
| 1.3.6.1.4.1.2751.100.29.1 | TableportMacCountLimitTable | not-accessible | current | The Port Mac Count Limit information table. |
| 1.3.6.1.4.1.2751.100.29.1.1 | RowportMacCountLimitEntry | not-accessible | current | The index of this table is port index. |
| 1.3.6.1.4.1.2751.100.29.1.1.1 | ColumnportMacCountLimitPortIndex | read-only | current | Port Index. |
| 1.3.6.1.4.1.2751.100.29.1.1.2 | ColumnportMacCountLimitConfigNum | read-create | current | Configration of the maxmum dynamic mac can be learned on the port. |
| 1.3.6.1.4.1.2751.100.29.1.1.3 | ColumnportMacCountLimitCurNum | read-only | current | The current number of the dynamic mac learned on the port. |
| 1.3.6.1.4.1.2751.100.29.1.1.4 | ColumnportMacCountLimitDisable | read-create | current | The disable state of mac count limit on the port.the disable state can be set,but enable state is not |
| 1.3.6.1.4.1.2751.100.29.1.1.5 | ColumnportMacCountLimitViolationMode | read-create | current | The violation mode of port mac count reach the threshold.The default mode is protect,if you want to disable violation mode,you can config protect mode. |
| 1.3.6.1.4.1.2751.100.29.1.1.6 | ColumnportMacCountLimitShutRecoveryTime | read-create | current | The recovery time of violation shutdown mode, the recovery time range is <5-3600>, the value 0 is to cancel recovery time, the value <1-4> is not allowed to co… |
| 1.3.6.1.4.1.2751.100.30 | Nodeddm | |||
| 1.3.6.1.4.1.2751.100.30.1 | TableddmTranscDiagnosisTable | not-accessible | current | A list of ddm transceiver diagnosis information. |
| 1.3.6.1.4.1.2751.100.30.1.1 | RowddmTranscDiagnosisEntry | not-accessible | current | entry for ddm transceiver diagnosis information. |
| 1.3.6.1.4.1.2751.100.30.1.1.1 | ColumnddmDiagnosisIfIndex | read-only | current | interface NO. |
| 1.3.6.1.4.1.2751.100.30.1.1.2 | ColumnddmDiagnosisTemperature | read-only | current | current Temperature of the port,and the unit is C. |
| 1.3.6.1.4.1.2751.100.30.1.1.3 | ColumnddmDiagTempHighAlarmThreshold | read-only | current | High alarm threshold of Temperature. |
| 1.3.6.1.4.1.2751.100.30.1.1.4 | ColumnddmDiagTempLowAlarmThreshold | read-only | current | Low alarm threshold of Temperature. |
| 1.3.6.1.4.1.2751.100.30.1.1.5 | ColumnddmDiagTempHighWarnThreshold | read-only | current | High warn threshold of Temperature. |
| 1.3.6.1.4.1.2751.100.30.1.1.6 | ColumnddmDiagTempLowWarnThreshold | read-only | current | Low warn threshold of Temperature. |
| 1.3.6.1.4.1.2751.100.30.1.1.7 | ColumnddmDiagnosisVoltage | read-only | current | voltage of the port,and the unit is V. |
| 1.3.6.1.4.1.2751.100.30.1.1.8 | ColumnddmDiagVoltHighAlarmThreshold | read-only | current | High alarm threshold of Voltage. |
| 1.3.6.1.4.1.2751.100.30.1.1.9 | ColumnddmDiagVoltLowAlarmThreshold | read-only | current | Low alarm threshold of Voltage. |
| 1.3.6.1.4.1.2751.100.30.1.1.10 | ColumnddmDiagVoltHighWarnThreshold | read-only | current | High warn threshold of Voltage. |
| 1.3.6.1.4.1.2751.100.30.1.1.11 | ColumnddmDiagVoltLowWarnThreshold | read-only | current | Low warn threshold of Voltage. |
| 1.3.6.1.4.1.2751.100.30.1.1.12 | ColumnddmDiagnosisBias | read-only | current | bias of the port,the unit is mA. |
| 1.3.6.1.4.1.2751.100.30.1.1.13 | ColumnddmDiagBiasHighAlarmThreshold | read-only | current | High alarm threshold of Bias. |
| 1.3.6.1.4.1.2751.100.30.1.1.14 | ColumnddmDiagBiasLowAlarmThreshold | read-only | current | Low alarm threshold of Bias. |
| 1.3.6.1.4.1.2751.100.30.1.1.15 | ColumnddmDiagBiasHighWarnThreshold | read-only | current | High warn threshold of Bias. |
| 1.3.6.1.4.1.2751.100.30.1.1.16 | ColumnddmDiagBiasLowWarnThreshold | read-only | current | Low warn threshold of Bias. |
| 1.3.6.1.4.1.2751.100.30.1.1.17 | ColumnddmDiagnosisRXPower | read-only | current | RXPower of the port,and the unit is dBM,if the value of RXPower is infinitesimal,then set it to '-'. |
| 1.3.6.1.4.1.2751.100.30.1.1.18 | ColumnddmDiagRXPowerHighAlarmThreshold | read-only | current | High alarm threshold of RXPower. |
| 1.3.6.1.4.1.2751.100.30.1.1.19 | ColumnddmDiagRXPowerLowAlarmThreshold | read-only | current | Low alarm threshold of RXPower. |
| 1.3.6.1.4.1.2751.100.30.1.1.20 | ColumnddmDiagRXPowerHighWarnThreshold | read-only | current | High warn threshold of RXPower. |
| 1.3.6.1.4.1.2751.100.30.1.1.21 | ColumnddmDiagRXPowerLowWarnThreshold | read-only | current | Low warn threshold of RXPower. |
| 1.3.6.1.4.1.2751.100.30.1.1.22 | ColumnddmDiagnosisTXPower | read-only | current | TXPower of the port,and the unit is dBM,if the value of TXPoweris infinitesimal,then set it to '-'. |
| 1.3.6.1.4.1.2751.100.30.1.1.23 | ColumnddmDiagTXPowerHighAlarmThreshold | read-only | current | High alarm threshold of TXPower. |
| 1.3.6.1.4.1.2751.100.30.1.1.24 | ColumnddmDiagTXPowerLowAlarmThreshold | read-only | current | k=Low alarm threshold of TXPower. |
| 1.3.6.1.4.1.2751.100.30.1.1.25 | ColumnddmDiagTXPowerHighWarnThreshold | read-only | current | High warn threshold of TXPower. |
| 1.3.6.1.4.1.2751.100.30.1.1.26 | ColumnddmDiagTXPowerLowWarnThreshold | read-only | current | Low warn threshold of TXPower. |
| 1.3.6.1.4.1.2751.100.30.1.1.27 | ColumnddmDiagSN | read-only | current | Serial number of transceiver. |
| 1.3.6.1.4.1.2751.100.30.1.1.28 | ColumnddmDiagVendor | read-only | current | Vendor of transceiver. |
| 1.3.6.1.4.1.2751.100.30.2 | TableddmTranscAlarmTable | not-accessible | current | A list of ddm transceiver alarm information. |
| 1.3.6.1.4.1.2751.100.30.2.1 | RowddmTranscAlarmEntry | not-accessible | current | entry for ddm transceiver alarm information. |
| 1.3.6.1.4.1.2751.100.30.2.1.1 | ColumnddmAlarmIfIndex | read-only | current | interface NO. |
| 1.3.6.1.4.1.2751.100.30.2.1.2 | ColumnddmAlarmInfo | read-only | current | ddm transceiver alarm information. |
| 1.3.6.1.4.1.2751.100.31 | NodepriPppoeIaMib | |||
| 1.3.6.1.4.1.2751.100.31.1 | ScalarpriPppoeIaGlobalEnable | read-write | current | Enable or disable the pppoe-ia function in the switch. |
| 1.3.6.1.4.1.2751.100.31.2 | ScalarpriPppoeIaSelfDefinedCircuitID | read-write | current | If user does not configure the circuit-id of pppoe-ia explicitly on a port, then the user can self-designed format to generate the circuit-id, the format optio… |
| 1.3.6.1.4.1.2751.100.31.3 | ScalarpriPppoeIaTr101CircuitID | read-write | current | If user does not configure the circuit-id of pppoe-ia explicitly on a port, then the user can config Tr-101 format to generate the circuit-id, the format like … |
| 1.3.6.1.4.1.2751.100.31.4 | ScalarpriPppoeIaSelfDefinedRemoteID | read-write | current | If user does not configure the remote-id of pppoe-ia explicitly on a port, then the user can self-designed format to generate the remote-id, the format options… |
| 1.3.6.1.4.1.2751.100.31.5 | ScalarpriPppoeIaDelimiter | read-write | current | Config pppoe-ia delimiter in circuitId and remoteId. Default: the default delimiter of type TR-101 is space, the default delimiter of type self-defined is '\0' |
| 1.3.6.1.4.1.2751.100.31.6 | ScalarpriPppoeIaCircuitIdFormat | read-write | current | Config pppoe-ia circuitId format. Default: the default format of the circuitId's mac(if included) is hex, other is ascii |
| 1.3.6.1.4.1.2751.100.31.7 | ScalarpriPppoeIaRemoteIdFormat | read-write | current | Config pppoe-ia remoteId format. Default: the default format of the remoteId's mac(if included) is hex, other is ascii |
| 1.3.6.1.4.1.2751.100.31.8 | TablepriPppoeIaPortTable | not-accessible | current | Pppoe-ia configuration in port. |
| 1.3.6.1.4.1.2751.100.31.8.1 | RowpriPppoeIaEntry | not-accessible | current | Pppoe-ia configuration in port. |
| 1.3.6.1.4.1.2751.100.31.8.1.1 | ColumnpriPppoeIaPortID | not-accessible | current | This value is port's ID. |
| 1.3.6.1.4.1.2751.100.31.8.1.2 | ColumnpriPppoeIaPortEnable | read-write | current | Enable or disable the pppoe-ia function of the port in the switch. Default:0. |
| 1.3.6.1.4.1.2751.100.31.8.1.3 | ColumnpriPppoeIaPortCircuitID | read-write | current | Config circuitId for the port. Default:NULL. |
| 1.3.6.1.4.1.2751.100.31.8.1.4 | ColumnpriPppoeIaPortRemoteID | read-write | current | Config remoteId for the port. Default:NULL. |
| 1.3.6.1.4.1.2751.100.31.8.1.5 | ColumnpriPppoeIaPortTrust | read-write | current | Enable or disable the pppoe-ia trust function of the port in the switch. Default:0 |
| 1.3.6.1.4.1.2751.100.31.8.1.6 | ColumnpriPppoeIaPortVendorTagStrip | read-write | current | Enable or disable the pppoe-ia vendorTag strip function of the port in the switch. Default:0 |
| 1.3.6.1.4.1.2751.100.32 | NodeportSecurity | |||
| 1.3.6.1.4.1.2751.100.32.1 | TablenewPortSecurityTable | not-accessible | current | The Port Security information table. |
| 1.3.6.1.4.1.2751.100.32.1.1 | RownewPortSecurityEntry | not-accessible | current | The index of this table is port index. |
| 1.3.6.1.4.1.2751.100.32.1.1.1 | ColumnportSecurityPortIndex | read-only | current | Secure Port Index. |
| 1.3.6.1.4.1.2751.100.32.1.1.2 | ColumnportSecurityState | read-create | current | enable or disable port security on this port. |
| 1.3.6.1.4.1.2751.100.32.1.1.3 | ColumnportSecuritySticky | read-create | current | enable or disable port security sticky on this port.If enable it,the port converts all the dynamic secure MAC addresses, including those that were dynamically … |
| 1.3.6.1.4.1.2751.100.32.1.1.4 | ColumnportSecurityMaxMacNum | read-create | current | The maximum number of security mac can be set or learned on the secure port. |
| 1.3.6.1.4.1.2751.100.32.1.1.5 | ColumnportSecurityCurMacNum | read-only | current | The number of the current security mac on the secure port. |
| 1.3.6.1.4.1.2751.100.32.1.1.6 | ColumnportSecurityCfgMacNum | read-only | current | The number of security mac can be set on the secure port. |
| 1.3.6.1.4.1.2751.100.32.1.1.7 | ColumnportSecurityVioMacNum | read-only | current | The violation number of mac received on the secure port. |
| 1.3.6.1.4.1.2751.100.32.1.1.8 | ColumnportSecurityAgingTime | read-create | current | The aging time for secure address entries on the secure port. |
| 1.3.6.1.4.1.2751.100.32.1.1.9 | ColumnportSecurityAgingType | read-create | current | The aging type for secure address entries on the secure port.If you want to disable inactivity or static aging type,you can config default type. |
| 1.3.6.1.4.1.2751.100.32.1.1.10 | ColumnportSecurityVioMode | read-create | current | The violation mode of secure port mac count reach the threshold.The default mode is shutdown,if you want to disable violation mode,you can config shutdown mode. |
| 1.3.6.1.4.1.2751.100.32.1.1.11 | ColumnportSecurityVioShutRecoveryTime | read-create | current | The recovery time of violation shutdown mode, the recovery time range is <5-3600>, the value 0 is to cancel recovery time, the value <1-4> is not allowed to co… |
| 1.3.6.1.4.1.2751.100.32.1.1.12 | ColumnportSecurityVioRestrictRecoveryTime | read-create | current | The recovery time of violation restrict mode, the recovery time range is <5-3600>, the value 0 is to cancel recovery time, the value <1-4> is not allowed to co… |
| 1.3.6.1.4.1.2751.100.32.2 | TableportSecurityVlanMaxNumTable | not-accessible | current | Table of maximum mac number with vlan on security port, and the secure port must be on trunk mode. |
| 1.3.6.1.4.1.2751.100.32.2.1 | RowportSecurityVlanMaxNumEntry | not-accessible | current | An entry in the port security maximum mac number with vlan table. |
| 1.3.6.1.4.1.2751.100.32.2.1.1 | ColumnportSecurityVlanPortIndex | read-only | current | Secure Port Index. |
| 1.3.6.1.4.1.2751.100.32.2.1.2 | ColumnportSecurityVlanIndex | read-only | current | The vlan index on the secure port. |
| 1.3.6.1.4.1.2751.100.32.2.1.3 | ColumnportSecurityVlanMaxMacNum | read-create | current | The maximum number of security mac can be set or learned in the vlan on the secure port, the maximum range is <1-4096>, the value 0 is to cancel maximum in thi… |
| 1.3.6.1.4.1.2751.100.32.2.1.4 | ColumnportSecurityVlanCurMacNum | read-only | current | The current number of security mac set or learned in the vlan on the secure port. |
| 1.3.6.1.4.1.2751.100.32.3 | TableportSecurityMacAddressTable | not-accessible | current | Table of mac address on security port. |
| 1.3.6.1.4.1.2751.100.32.3.1 | RowportSecurityMacAddressEntry | not-accessible | current | An entry in the port security mac address table. |
| 1.3.6.1.4.1.2751.100.32.3.1.1 | ColumnportSecurityMacAddressPortIndex | read-only | current | Secure Port Index. |
| 1.3.6.1.4.1.2751.100.32.3.1.2 | ColumnportSecurityMacAddressVlanIndex | read-only | current | The vlan index on the secure port.When set mac address,the vlan index must be zero if the port is on access mode. |
| 1.3.6.1.4.1.2751.100.32.3.1.3 | ColumnportSecurityMacAddress | read-only | current | Secure mac address on this secure port |
| 1.3.6.1.4.1.2751.100.32.3.1.4 | ColumnportSecurityMacType | read-create | current | The type of mac address on the secure port. |
| 1.3.6.1.4.1.2751.100.32.3.1.5 | ColumnportSecurityMacStatus | read-create | current | Current state of the mac address. |
| 1.3.6.1.4.1.2751.100.33 | NodemacNotificationMib | |||
| 1.3.6.1.4.1.2751.100.33.1 | NodemacNotificationMibObjects | |||
| 1.3.6.1.4.1.2751.100.33.1.1 | NodemacNotificationGlobalObjects | |||
| 1.3.6.1.4.1.2751.100.33.1.1.1 | ScalarmacNotificationGlobalFeatureEnabled | read-write | current | Indicates whether the MAC notification feature is currently running in the device. Setting this object to false(2) disables the MAC notification feature global… |
| 1.3.6.1.4.1.2751.100.33.1.1.2 | ScalarmacNotificationNotificationInterval | read-only | current | This object specifies the maximum interval of time between macNotificationMacChangedNotifications being generated by the device. If the value of macNotificatio… |
| 1.3.6.1.4.1.2751.100.33.1.1.3 | ScalarmacNotificationMacAddressesLearnt | read-only | current | Indicates the number of MAC addresses learnt by the device. |
| 1.3.6.1.4.1.2751.100.33.1.1.4 | ScalarmacNotificationMacAddressesRemoved | read-only | current | Indicates the number of MAC addresses removed from the forwarding database. |
| 1.3.6.1.4.1.2751.100.33.1.1.5 | ScalarmacNotificationNotificationsEnabled | read-write | current | Indicates whether macNotificationMacChangedNotification notifications will or will not be sent when there are MAC addresses learnt or removed from the device's… |
| 1.3.6.1.4.1.2751.100.33.1.1.6 | ScalarmacNotificationNotificationsSent | read-only | current | Indicates the number of macNotificationMacChangedNotifications sent out by the device. |
| 1.3.6.1.4.1.2751.100.33.1.1.7 | ScalarmacNotificationHistTableMaxLength | read-only | current | The upper limit on the number of entries that the macNotificationHistoryTable may contain. A value of 0 will prevent any history from being retained. When this… |
| 1.3.6.1.4.1.2751.100.33.1.1.8 | TablemacNotificationHistoryTable | not-accessible | current | This table will archive the MAC change notification events generated by this device. The MAC change notification events are archived here even if macNotificati… |
| 1.3.6.1.4.1.2751.100.33.1.1.8.1 | RowmacNotificationHistoryEntry | not-accessible | current | A MAC change notification message that was previously generated by this device. Each entry is indexed by a message index. |
| 1.3.6.1.4.1.2751.100.33.1.1.8.1.1 | ColumnmacNotificationHistIndex | read-only | current | An index that uniquely identifies a MAC change notification event previously generated by the device. This index starts at 1 and increases by one when a MAC ch… |
| 1.3.6.1.4.1.2751.100.33.1.1.8.1.2 | ColumnmacNotificationHistMacChangedMsg | read-only | current | This object contains the information of a MAC change notification event. It consists of several tuples packed together in the format of '<tuple1><tuple2>...'. … |
| 1.3.6.1.4.1.2751.100.33.1.1.8.1.3 | ColumnmacNotificationHistTimestamp | read-only | current | The value of sysUpTime when the macNotificationMacChangedNotification containing the information denoted by the macNotificationHistMacChangedMsg object in this… |
| 1.3.6.1.4.1.2751.100.33.1.2 | NodemacNotificationInterfaceObjects | |||
| 1.3.6.1.4.1.2751.100.33.1.2.1 | TablemacNotificationIfConfigTable | not-accessible | current | This table enables or disables the generation of notification at each interface when MAC address is learnt or removed. |
| 1.3.6.1.4.1.2751.100.33.1.2.1.1 | RowmacNotificationIfConfigEntry | not-accessible | current | Each entry contains the configuration for enabling the MAC notification at each interface that supports this feature. |
| 1.3.6.1.4.1.2751.100.33.1.2.1.1.1 | ColumnmacNotificationMacAddrLearntEnable | read-write | current | Indicates whether this interface is enabled to send macNotificationMacChangedNotification when it learns a new MAC address. This variable has no effect when th… |
| 1.3.6.1.4.1.2751.100.33.1.2.1.1.2 | ColumnmacNotificationMacAddrRemovedEnable | read-write | current | Indicates whether this interface is enabled to send macNotificationMacChangedNotification when a MAC address which it learnt previously is removed from the for… |
| 1.3.6.1.4.1.2751.100.34 | NodeprieeePortConfig | |||
| 1.3.6.1.4.1.2751.100.34.1 | TableprieeePortTable | not-accessible | current | A table containing current configuration information for each port. |
| 1.3.6.1.4.1.2751.100.34.1.1 | RowprieeePortEntry | not-accessible | current | eee configuration in port |
| 1.3.6.1.4.1.2751.100.34.1.1.1 | ColumneeePortIndex | not-accessible | current | The eee configuration port index. |
| 1.3.6.1.4.1.2751.100.34.1.1.2 | ColumneeePortStatus | read-write | current | The eee config. Enable expresses it is turned on, while disable indicates that off. |
| 1.3.6.1.4.1.2751.100.35 | NodeportRateLimit | |||
| 1.3.6.1.4.1.2751.100.35.1 | TableportRateLimitTable | not-accessible | current | The Port Receiving Packets Rate Limit information table. |
| 1.3.6.1.4.1.2751.100.35.1.1 | RowportRateLimitEntry | not-accessible | current | The index of this table is port index. |
| 1.3.6.1.4.1.2751.100.35.1.1.1 | ColumnportRateLimitPortIndex | read-only | current | Port Index. |
| 1.3.6.1.4.1.2751.100.35.1.1.2 | ColumnportRateLimitConfigBroadcastNum | read-create | current | Configration of the max receiving rate of broadcast packets on the port,the value range is <200-2000000>. The value 0 means disable the rate limit of broadcast… |
| 1.3.6.1.4.1.2751.100.35.1.1.3 | ColumnportRateLimitCurBroadcastNum | read-only | current | The current receiving rate of broadcast packets on the port. |
| 1.3.6.1.4.1.2751.100.35.1.1.4 | ColumnportRateLimitConfigMulticastNum | read-create | current | Configration of the max receiving rate of multicast packets on the port,the value range is <200-2000000>. The value 0 means disable the rate limit of multicast… |
| 1.3.6.1.4.1.2751.100.35.1.1.5 | ColumnportRateLimitCurMulticastNum | read-only | current | The current receiving rate of Multicast packets on the port. |
| 1.3.6.1.4.1.2751.100.35.1.1.6 | ColumnportRateLimitConfigUnicastNum | read-create | current | Configration of the max receiving rate of unicast packets on the port,the value range is <200-2000000>. The value 0 means disable the rate limit of unicast pac… |
| 1.3.6.1.4.1.2751.100.35.1.1.7 | ColumnportRateLimitCurUnicastNum | read-only | current | The current receiving rate of unicast packets on the port. |
| 1.3.6.1.4.1.2751.100.35.1.1.8 | ColumnportRateLimitConfigAllNum | read-create | current | Configration of the max receiving rate of all packets on the port,the value range is <200-2000000>. The value 0 means disable the rate limit of all packets. th… |
| 1.3.6.1.4.1.2751.100.35.1.1.9 | ColumnportRateLimitCurAllNum | read-only | current | The current receiving rate of all packets on the port. |
| 1.3.6.1.4.1.2751.100.35.1.1.10 | ColumnportRateLimitPacketsType | read-only | current | Which type of receiving packets that rate limit is set. 0:none, 1:broadcast, 2:multicast, 3:unicast, 4:all, 5:broadcast+multicast, 6:broadcast+unicast, 7:multi… |
| 1.3.6.1.4.1.2751.100.35.1.1.11 | ColumnportRateLimitViolationMode | read-create | current | The violation mode of port receiving packets rate reach the threshold.The default mode is no violation actions. |
| 1.3.6.1.4.1.2751.100.35.1.1.12 | ColumnportRateLimitShutRecoveryTime | read-create | current | The recovery time of violation shutdown mode, the recovery time range is <0-86400>, the value 0 means the port cann't be recovery forever, the default value is… |
| 1.3.6.1.4.1.2751.100.36 | NodemacBlackholeConfig | |||
| 1.3.6.1.4.1.2751.100.36.1 | TablemacBlackholeTable | not-accessible | current | A table containing current configuration information for each mac in vlan`s status. |
| 1.3.6.1.4.1.2751.100.36.1.1 | RowmacBlackholeEntry | not-accessible | current | Thie entry is control the mac add to blackhole or delete from blackhole. |
| 1.3.6.1.4.1.2751.100.36.1.1.1 | ColumnmacAddressInVlanID | not-accessible | current | This value is the mac address in vlan. |
| 1.3.6.1.4.1.2751.100.36.1.1.2 | ColumnmacAddress | not-accessible | current | This value is mac address. |
| 1.3.6.1.4.1.2751.100.36.1.1.3 | ColumnmacType | read-create | current | Control the mac from both(0)/source(1)/destination(2).Default both(0). |
| 1.3.6.1.4.1.2751.100.36.1.1.4 | ColumnmacStatus | read-create | current | creat(0) the mac to blackhole,or destroy(2) the mac from blackhole.active(1)the mac in blackhole |
| 1.3.6.1.4.1.2751.100.37 | NodepriCable | |||
| 1.3.6.1.4.1.2751.100.37.1 | TablecableTable | not-accessible | current | A list of port entries. |
| 1.3.6.1.4.1.2751.100.37.1.1 | RowpriCableEntry | not-accessible | current | A port entry containing port information, status, and control. |
| 1.3.6.1.4.1.2751.100.37.1.1.1 | ColumnCableLengthInfo | read-only | current | Cable Length Info. |
| 1.3.6.1.4.1.2751.100.38 | NodepriMrppRing | |||
| 1.3.6.1.4.1.2751.100.38.1 | TablepriMrppRingTable | not-accessible | current | The MRPP Ring information table. |
| 1.3.6.1.4.1.2751.100.38.1.1 | RowpriMrppRingEntry | not-accessible | current | The index of this table is RING index. |
| 1.3.6.1.4.1.2751.100.38.1.1.1 | ColumnmrppRingIndex | read-only | current | mrpp ring Index<1-4096>. |
| 1.3.6.1.4.1.2751.100.38.1.1.2 | ColumnmrppRingNodeMode | read-only | current | mrpp ring node mode:MASTER:1,TRANSIT:0. |
| 1.3.6.1.4.1.2751.100.38.1.1.3 | ColumnmrppRingNodeState | read-only | current | mrpp ring node state: IDLE: 0, COMPLETE: 1, FAILED: 2, LINKS_UP: 3, LINKS_DOWN: 4, PRE_FORWARDING: 5. |
| 1.3.6.1.4.1.2751.100.38.1.1.4 | ColumnmrppRingStatus | read-only | current | mrpp ring status:enable:1,disable:0. |
| 1.3.6.1.4.1.2751.100.38.1.1.5 | ColumnmrppRingPriPortName | read-only | current | ring's traffic primary port name. |
| 1.3.6.1.4.1.2751.100.38.1.1.6 | ColumnmrppRingPriPortBlockState | read-only | current | ring's traffic primary port block state:BLOCK:1,UNBLOCK:0. |
| 1.3.6.1.4.1.2751.100.38.1.1.7 | ColumnmrppRingSecPortName | read-only | current | ring's traffic secondary port name. |
| 1.3.6.1.4.1.2751.100.38.1.1.8 | ColumnmrppRingSecPortBlockState | read-only | current | ring's traffic secondary port block state:BLOCK:1,UNBLOCK:0. |
| 1.3.6.1.4.1.2751.101 | Nodenotifications | |||
| 1.3.6.1.4.1.2751.101.100 | NodeantiArpscan | |||
| 1.3.6.1.4.1.2751.101.100.1 | NodeprohibitPortOID | |||
| 1.3.6.1.4.1.2751.101.100.2 | NoderecoverPortOID | |||
| 1.3.6.1.4.1.2751.101.100.3 | NodeprohibitIPOID | |||
| 1.3.6.1.4.1.2751.101.100.4 | NodeprohibitIPExceedSlimitOID | |||
| 1.3.6.1.4.1.2751.101.100.5 | NodeprohibitIPExceedHlimitOID | |||
| 1.3.6.1.4.1.2751.101.100.6 | NoderecoverIPOID | |||
| 1.3.6.1.4.1.2751.101.100.7 | NodeipAddress | |||
| 1.3.6.1.4.1.2751.101.100.8 | NodearpSpeedLimitOID | |||
| 1.3.6.1.4.1.2751.101.100.9 | NodearpDiscardOID | |||
| 1.3.6.1.4.1.2751.101.100.10 | NoderecoverArpSpeedOID | |||
| 1.3.6.1.4.1.2751.101.100.11 | NoderecoverArpDiscardOID | |||
| 1.3.6.1.4.1.2751.101.101 | Nodefan | |||
| 1.3.6.1.4.1.2751.101.101.1 | NodefanAbnormalOID | |||
| 1.3.6.1.4.1.2751.101.101.2 | NodefanNormalOID | |||
| 1.3.6.1.4.1.2751.101.101.3 | NodefanInsertOID | |||
| 1.3.6.1.4.1.2751.101.101.4 | NodefanPullOutOID | |||
| 1.3.6.1.4.1.2751.101.102 | Nodepower | |||
| 1.3.6.1.4.1.2751.101.102.1 | NodepowerAbnormalOID | |||
| 1.3.6.1.4.1.2751.101.102.2 | NodepowerNormalOID | |||
| 1.3.6.1.4.1.2751.101.102.3 | NodepowerInsertOID | |||
| 1.3.6.1.4.1.2751.101.102.4 | NodepowerPullOutOID | |||
| 1.3.6.1.4.1.2751.101.103 | NodeslotTemperature | |||
| 1.3.6.1.4.1.2751.101.103.1 | NodeslotTemperatureHigherOID | |||
| 1.3.6.1.4.1.2751.101.103.2 | NodeslotTemperatureLowerOID | |||
| 1.3.6.1.4.1.2751.101.104 | Nodedhcpsnooping | |||
| 1.3.6.1.4.1.2751.101.104.1 | NodeshutdownPort | |||
| 1.3.6.1.4.1.2751.101.104.2 | NodenoShutdownPort | |||
| 1.3.6.1.4.1.2751.101.104.3 | NodeaddBlackhole | |||
| 1.3.6.1.4.1.2751.101.104.4 | NodedelBlackhole | |||
| 1.3.6.1.4.1.2751.101.105 | NoderateViolation | |||
| 1.3.6.1.4.1.2751.101.105.1 | NoderateViolationShutdownPort | |||
| 1.3.6.1.4.1.2751.101.105.2 | NoderateViolationNoShutdownPort | |||
| 1.3.6.1.4.1.2751.101.106 | NodeportGroup | |||
| 1.3.6.1.4.1.2751.101.106.1 | NodeportGroupCreate | |||
| 1.3.6.1.4.1.2751.101.106.2 | NodeportGroupDelete | |||
| 1.3.6.1.4.1.2751.101.106.3 | NodeportGroupUpdate | |||
| 1.3.6.1.4.1.2751.101.107 | NodemacNotification | |||
| 1.3.6.1.4.1.2751.101.107.1 | NodemacAdd | |||
| 1.3.6.1.4.1.2751.101.107.2 | NodemacDelete | |||
| 1.3.6.1.4.1.2751.101.107.3 | NodemacMove | |||
| 1.3.6.1.4.1.2751.101.108 | NodemacCountLimit | |||
| 1.3.6.1.4.1.2751.101.108.1 | NodemacCountThreshold | |||
| 1.3.6.1.4.1.2751.101.109 | NodeefmOam | |||
| 1.3.6.1.4.1.2751.101.109.1 | NodeefmOamDiscoverySuccess | |||
| 1.3.6.1.4.1.2751.101.109.2 | NodeefmOamDiscoveryTimeout | |||
| 1.3.6.1.4.1.2751.101.109.3 | NodeefmOamLocalErrSymbolPeriodEvent | |||
| 1.3.6.1.4.1.2751.101.109.4 | NodeefmOamLocalErrFramePeriodEvent | |||
| 1.3.6.1.4.1.2751.101.109.5 | NodeefmOamLocalErrFrameEvent | |||
| 1.3.6.1.4.1.2751.101.109.6 | NodeefmOamLocalErrFrameSecondsSummaryEvent | |||
| 1.3.6.1.4.1.2751.101.109.7 | NodeefmOamLocalLinkFault | |||
| 1.3.6.1.4.1.2751.101.109.8 | NodeefmOamLocalCriticalEvent | |||
| 1.3.6.1.4.1.2751.101.109.9 | NodeefmOamRemoteErrSymbolPeriodEvent | |||
| 1.3.6.1.4.1.2751.101.109.10 | NodeefmOamRemoteErrFramePeriodEvent | |||
| 1.3.6.1.4.1.2751.101.109.11 | NodeefmOamRemoteErrFrameEvent | |||
| 1.3.6.1.4.1.2751.101.109.12 | NodeefmOamRemoteErrFrameSecondsSummaryEvent | |||
| 1.3.6.1.4.1.2751.101.109.13 | NodeefmOamRemoteLinkFault | |||
| 1.3.6.1.4.1.2751.101.109.14 | NodeefmOamRemoteCriticalEvent | |||
| 1.3.6.1.4.1.2751.101.109.15 | NodeefmOamRemoteDyingGasp | |||
| 1.3.6.1.4.1.2751.101.109.16 | NodeefmOamLoopBackSuccess | |||
| 1.3.6.1.4.1.2751.101.109.17 | NodeefmOamLoopBackExit | |||
| 1.3.6.1.4.1.2751.101.110 | NodetransceiverMonitor | |||
| 1.3.6.1.4.1.2751.101.110.1 | NodetransceiverMonitorAlarmEvent | |||
| 1.3.6.1.4.1.2751.101.110.2 | NodetransceiverMonitorWarnEvent | |||
| 1.3.6.1.4.1.2751.101.111 | NodeportSecurityTrap | |||
| 1.3.6.1.4.1.2751.101.111.1 | NodeportSecurityViolation | |||
| 1.3.6.1.4.1.2751.101.112 | NodeloopbackDetectionTrap | |||
| 1.3.6.1.4.1.2751.101.112.1 | NodeloopbackDetectionEvent | |||
| 1.3.6.1.4.1.2751.101.113 | NodeillegalDipPkt | |||
| 1.3.6.1.4.1.2751.101.113.1 | NodeillegalDipPktRcv | |||
| 1.3.6.1.4.1.2751.101.114 | NodedyingGasp | |||
| 1.3.6.1.4.1.2751.101.114.1 | NodedyingGaspEvent | |||
| 1.3.6.1.4.1.2751.101.115 | Nodevct | |||
| 1.3.6.1.4.1.2751.101.115.1 | NodevctLinkDown | |||
| 1.3.6.1.4.1.2751.101.116 | NodecopyRunningConfig | |||
| 1.3.6.1.4.1.2751.101.116.1 | NodecopyRunningConfigEvent | |||
| 1.3.6.1.4.1.2751.101.117 | NodesystemStartReady | |||
| 1.3.6.1.4.1.2751.101.117.1 | NodesystemStartReadyEvent | |||
| 1.3.6.1.4.1.2751.101.118 | NodeboardFail | |||
| 1.3.6.1.4.1.2751.101.118.1 | NodeboardFailEvent | |||
| 1.3.6.1.4.1.2751.101.119 | NodepowerFail | |||
| 1.3.6.1.4.1.2751.101.119.1 | NodepowerFailEvent | |||
| 1.3.6.1.4.1.2751.101.120 | Nodemstp | |||
| 1.3.6.1.4.1.2751.101.120.1 | NodemstpPortStateChanged | |||
| 1.3.6.1.4.1.2751.101.121 | Nodedcp | |||
| 1.3.6.1.4.1.2751.101.121.1 | NodedcpDeny | |||
| 1.3.6.1.4.1.2751.101.122 | NodeuserLoginLogout | |||
| 1.3.6.1.4.1.2751.101.122.1 | NodeconsoleUserLogin | |||
| 1.3.6.1.4.1.2751.101.122.2 | NodeconsoleUserLogout | |||
| 1.3.6.1.4.1.2751.101.122.3 | NodetelnetUserLogin | |||
| 1.3.6.1.4.1.2751.101.122.4 | NodetelnetUserLogout | |||
| 1.3.6.1.4.1.2751.101.122.5 | NodesshUserLogin | |||
| 1.3.6.1.4.1.2751.101.122.6 | NodesshUserLogout | |||
| 1.3.6.1.4.1.2751.101.125 | Nodeerps | |||
| 1.3.6.1.4.1.2751.101.125.1 | NodeerpsSfDetected | |||
| 1.3.6.1.4.1.2751.101.125.2 | NodeerpsSfCleared | |||
| 1.3.6.1.4.1.2751.102 | Nodeconformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatusPrivate | INTEGER { enabled(1), disabled(0) } | current | A simple status value for the object. |
| InetAddress | OCTET STRING (SIZE (0..255)) | current | Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the InetAddressType… |
| InetAddressType | INTEGER { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) } | current | A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indica… |
| InterfaceIndex | Integer32 (1..2147483647) | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must re… |
| InterfaceIndexOrZero | Integer32 (0..2147483647) | current | This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits t… |
| Ipv6Address | OCTET STRING (SIZE (16)) | current | This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order. |
| NtpDateTime | OCTET STRING (SIZE (0 | 16)) | current | |
| NtpStratum | Unsigned32 (1..16) | current | The NTP stratum, with 16 representing no stratum. |
| OspfAreaID | IpAddress | current | An OSPF Area Identifier. |
| OspfBigMetric | Integer32 (0..'FFFFFE'h) | current | The OSPF External Metric. |
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| SnmpAdminString | OCTET STRING (SIZE (0..255)) | current | An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an oct… |
| TimeFilter | TimeTicks | current | |
| ValidStatus | INTEGER { valid(1), invalid(0) } | current | A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destr… |
| VlanList | OCTET STRING | current | Vlan ID range is (1..4094), Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the mos… |