QTECH-AP-MIB
63 objects
This module defines qtech aggregate port(AP) mibs.
Imported Objects
| Q-BRIDGE-MIB | PortList |
| QTECH-SMI | qtechMgmt |
| QTECH-TC | -- ConfigStatus IfIndex MemberMap |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.7 | IdentityqtechApMIB | This module defines qtech aggregate port(AP) mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.7.1 | NodeqtechApMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.1 | ScalarqtechApMaxNumber | read-only | current | Number of MAX aggregate ports this system supported. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.2 | ScalarqtechApCurrentNumber | read-only | current | Number of current aggregate ports this system have. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.3 | TableqtechApPortConfigTable | not-accessible | obsolete | aggregate port table. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.3.1 | RowqtechApPortConfigEntry | not-accessible | obsolete | list of aggregate port and it's port group table. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.3.1.1 | ColumnqtechApPortConfigPortIndex | not-accessible | obsolete | |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.3.1.2 | ColumnqtechApPortConfigApIndex | read-write | obsolete | Set this value to 1 �� qtechApMaxNumber indicate that add this value to that aggregate port which this aggregate port must be valid. It separates this port… |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.4 | TableqtechApTable | not-accessible | obsolete | Aggregate ports table. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.4.1 | RowqtechApEntry | not-accessible | obsolete | list of aggregate ports and it's distribution table. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.4.1.1 | ColumnqtechApIndex | read-only | obsolete | Aggregate ports index. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.4.1.2 | ColumnqtechApMemberAction | read-only | obsolete | Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggregate port. and 0 indicate… |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.4.1.3 | ColumnqtechApPossibleMember | read-only | obsolete | Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect can be set in the aggregate port. and 0 … |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.4.1.4 | ColumnqtechApMaxPtNumber | read-only | obsolete | Max number of ports this aggregate port can include. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.5 | ScalarqtechApFlowBalance | read-write | current | Set the AP traffic balancing algorithm.You can choose enhanced-profile after create a Enhanced mode profile |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.6 | TableqtechApConfigTable | not-accessible | current | Aggregate ports table. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.6.1 | RowqtechApConfigEntry | not-accessible | current | list of aggregate ports and it's distribution table. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.6.1.1 | ColumnqtechApConfigNumber | read-write | current | Aggregate ports number.Set this value to 1 �� qtechApMaxNumber. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.6.1.2 | ColumnqtechApConfigIndex | read-only | current | Aggregate ports index. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.6.1.3 | ColumnqtechApConfigMaxPtNumber | read-only | current | Number of MAX aggregate ports this system supported. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.6.1.4 | ColumnqtechApConfigCurrentPtNumber | read-only | current | Number of current ports this aggregate port have. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.6.1.5 | ColumnqtechApConfigPortMember | read-only | current | Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggregate port. and 0 indicate… |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.6.1.6 | ColumnqtechApConfigAction | read-write | current | The value 1 to add an aggregate port, 0 to delete an aggregate port. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.7 | TableqtechApPortMemberTable | not-accessible | current | Aggregate port table. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.7.1 | RowqtechApPortMemberEntry | not-accessible | current | list of aggregate port and it's port group table. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.7.1.1 | ColumnqtechApPortMemberPortIndex | read-only | current | a switch port index. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.7.1.2 | ColumnqtechApPortMemberApNumber | read-write | current | Set this value to 1 �� qtechApMaxNumber indicate that add this value to that aggregate port. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.7.1.3 | ColumnqtechApPortMemberAction | read-write | current | The value 1 indcate add to an aggregate port, 0 to delete from an aggregate port. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.8 | ScalarqtechApBalcProfName | read-write | current | Enhanced mode profile name. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9 | TableqtechApProfTable | not-accessible | current | Configure the enhanced mode profile. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1 | RowqtechApProfEntry | not-accessible | current | Enhanced mode profile configuration entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.1 | ColumnqtechApProfIdx | read-only | current | Enhanced mode profile index. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.2 | ColumnqtechApProfName | read-only | current | Enhanced mode profile name. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.3 | ColumnqtechApProfL2SrcMac | read-write | current | Perform traffic balancing distribution according to the source MAC address of incoming layer2 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.4 | ColumnqtechApProfL2DestMac | read-write | current | Perform traffic balancing distribution according to the destination MAC address of incoming layer2 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.5 | ColumnqtechApProfL2Pro | read-write | current | Perform traffic balancing distribution according to the Ethernet type of the incoming layer2 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.6 | ColumnqtechApProfL2Vlan | read-write | current | Perform traffic balancing distribution according to the VLAN ID of the incoming layer2 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.7 | ColumnqtechApProfL2SrcPort | read-write | current | Perform traffic balancing distribution according to the source port of incoming layer2 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.8 | ColumnqtechApProfIpv4SrcIp | read-write | current | Perform traffic balancing distribution according to the source IP address of incoming IPv4 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.9 | ColumnqtechApProfIpv4DestIp | read-write | current | Perform traffic balancing distribution according to the destination IP address of incoming IPv4 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.10 | ColumnqtechApProfIpv4Pro | read-write | current | Perform traffic balancing distribution according to protocol type of the incoming IPv4 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.11 | ColumnqtechApProfIpv4L4SrcPort | read-write | current | Perform traffic balancing distribution according to the L4 layer source port of incoming IPv4 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.12 | ColumnqtechApProfIpv4L4DestPort | read-write | current | Perform traffic balancing distribution according to the L4 layer destination port of incoming IPv4 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.13 | ColumnqtechApProfIpv4Vlan | read-write | current | Perform traffic balancing distribution according to the VLAN ID of the incoming IPv4 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.14 | ColumnqtechApProfIpv4SrcPort | read-write | current | Perform traffic balancing distribution according to the source port of incoming IPv4 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.15 | ColumnqtechApProfIpv6SrcIp | read-write | current | Perform traffic balancing distribution according to the source IP address of incoming IPv6 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.16 | ColumnqtechApProfIpv6DestIp | read-write | current | Perform traffic balancing distribution according to the destination IP address of incoming IPv6 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.17 | ColumnqtechApProfIpv6Pro | read-write | current | Perform traffic balancing distribution according to protocol type of the incoming IPv6 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.18 | ColumnqtechApProfIpv6L4SrcPort | read-write | current | Perform traffic balancing distribution according to the L4 layer source port of incoming IPv6 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.19 | ColumnqtechApProfIpv6L4DestPort | read-write | current | Perform traffic balancing distribution according to the L4 layer destination port of incoming IPv6 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.20 | ColumnqtechApProfIpv6Vlan | read-write | current | Perform traffic balancing distribution according to the VLAN ID of the incoming IPv6 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.21 | ColumnqtechApProfIpv6SrcPort | read-write | current | Perform traffic balancing distribution according to the source port of incoming IPv6 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.22 | ColumnqtechApProfMplsTopLabel | read-write | current | Perform traffic balancing distribution according to the top-label of the incoming mpls packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.23 | ColumnqtechApProfMpls2ndLabel | read-write | current | Perform traffic balancing distribution according to the 2nd-label of the incoming mpls packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.24 | ColumnqtechApProfMplsSrcIp | read-write | current | Perform traffic balancing distribution according to the source IP address of incoming mpls packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.25 | ColumnqtechApProfMplsDestIp | read-write | current | Perform traffic balancing distribution according to the destination IP address of incoming mpls packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.26 | ColumnqtechApProfMplsVlan | read-write | current | Perform traffic balancing distribution according to the VLAN ID of the incoming mpls packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.1.9.1.27 | ColumnqtechApProfMplsSrcPort | read-write | current | Perform traffic balancing distribution according to the source port of incoming mpls packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.7.2 | NodeqtechApMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.7.2.1 | NodeqtechApMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.7.2.1.1 | ComplianceqtechApMIBCompliance | current | The compliance statement for entities which implement the Qtech Ap MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.7.2.2 | NodeqtechApMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.7.2.2.1 | GroupqtechApMIBGroup | current | A collection of objects providing aggregate port configure. |