QTECH-DVMRPINTEROPERABILITY-MIB
59 objects
This module defines qtech dvmrp mibs.
Imported Objects
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| QTECH-SMI | qtechMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.29 | IdentityqtechDvmrpMIB | This module defines qtech dvmrp mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.29.1 | NodeqtechDvmrpMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.1 | NodeqtechDvmrpGroup | |||
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.1.1 | ScalarqtechDvmrpRouteLimit | read-write | current | Number of DVMRP routes that can be advertised. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.1.2 | ScalarqtechDvmrpRoutehogNotification | read-write | current | Number of routes allowed before a syslog message is triggered. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2 | TableqtechDvmrpInterfaceTable | not-accessible | current | The (conceptual) table listing the interfaces on which Dvmrp is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1 | RowqtechDvmrpInterfaceEntry | not-accessible | current | An entry (conceptual row) representing an interface on which Dvmrp is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1.1 | ColumnqtechDvmrpInterfaceIfIndex | not-accessible | current | The ifIndex value of this Dvmrp interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1.2 | ColumnqtechDvmrpInterfaceDefaultInformation | read-write | current | originate means Other routes more specific than 0.0.0.0 may be advertised,only means No DVMRP routes other than 0.0.0.0 are advertised.Default means Disable th… |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1.3 | ColumnqtechDvmrpInterfaceUnicastRoutingStatus | read-write | current | Enable DVMRP unicast routing (to send and receive DVMRP routes). This feature is disabled by default. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1.4 | ColumnqtechDvmrpInterfaceRejectNonPrunersStatus | read-write | current | Prevent peering with nonpruning DVMRP neighbors. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1.5 | ColumnqtechDvmrpInterfaceAutoSummaryStatus | read-write | current | Disable or Enabled DVMRP autosummarization. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1.6 | ColumnqtechDvmrpInterfaceRtsRec | read-only | current | The number of received Dvmrp Routes. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1.7 | ColumnqtechDvmrpInterfacePoisonReverseRtsRec | read-only | current | The number of received poison-reverse Routes. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1.8 | ColumnqtechDvmrpInterfaceUniRtAdvertised | read-only | current | The number of Advertised unicast Routes. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.2.1.9 | ColumnqtechDvmrpInterfaceDvmrpRtAdvertised | read-only | current | The number of Advertised dvmrp Routes. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.3 | TableqtechDvmrpMetricOffsetTable | not-accessible | current | The (conceptual) table listing the MetricOffset on which Dvmrp is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.3.1 | RowqtechDvmrpMetricOffsetEntry | not-accessible | current | An entry (conceptual row) representing an MetricOffset on which Dvmrp is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.3.1.1 | ColumnqtechDvmrpMetricOffsetIfIndex | not-accessible | current | The ifIndex value of this Dvmrp interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.3.1.2 | ColumnqtechDvmrpMetricOffsetInOrOut | not-accessible | current | in means Specifies that the increment value is added to incoming DVMRP reports and is reported in mrinfo replies. out means Specifies that the increment value … |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.3.1.3 | ColumnqtechDvmrpMetricOffsetIncrement | read-write | current | Value added to the metric of a DVMRP route advertised in a report message,the default increment value for incoming routes is 1,the range is 1 to 31; and the de… |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.4 | TableqtechDvmrpSummaryTable | not-accessible | current | The (conceptual) table listing the Summary on which Dvmrp is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.4.1 | RowqtechDvmrpSummaryEntry | not-accessible | current | An entry (conceptual row) representing Summary enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.4.1.1 | ColumnqtechDvmrpIfIndex | not-accessible | current | The ifIndex value of this Dvmrp interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.4.1.2 | ColumnqtechDvmrpSummaryAddress | not-accessible | current | Summary IP address that is advertised instead of the more specific route. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.4.1.3 | ColumnqtechDvmrpSummaryMask | not-accessible | current | Mask on the summary IP address. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.4.1.4 | ColumnqtechDvmrpSummaryMetric | read-create | current | Metric that is advertised with the summary address. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.4.1.5 | ColumnqtechDvmrpSummaryStatus | read-create | current | The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.5 | TableqtechDvmrpMetricTable | not-accessible | current | The (conceptual) table listing the interfaces on which Dvmrp is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.5.1 | RowqtechDvmrpMetricEntry | not-accessible | current | An entry (conceptual row) of qtechDvmrpMetricTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.5.1.1 | ColumnqtechDvmrpMetricIfIndex | not-accessible | current | The ifIndex value of this Dvmrp interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.5.1.2 | ColumnqtechDvmrpMetric | not-accessible | current | Metric associated with a set of destinations for DVMRP reports. A value of 0 means that the route is not advertised. A value of 32 is equivalent to infinity (u… |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.5.1.3 | ColumnqtechDvmrpMetricListAclName | read-create | current | The name of an access list,only the multicast destinations that match the access list are reported with the configured metric. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.5.1.4 | ColumnqtechDvmrpMetricProtocolId | not-accessible | current | The number of Protocol Id,only routes learned by the specified routing protocol are advertised in DVMRP report messages. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.5.1.5 | ColumnqtechDvmrpMetricStatus | read-create | current | The status of this entry. Creating the entry enables Dvmrp Metric; destroying the entry disables Dvmrp Metric. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6 | TableqtechDvmrpRouteTable | not-accessible | current | The (conceptual) table listing the interfaces on which Dvmrp is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1 | RowqtechDvmrpRouteEntry | not-accessible | current | An entry (conceptual row) of qtechDvmrpRouteTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1.1 | ColumnqtechDvmrpRouteIpAddress | not-accessible | current | Clears the longest matched route. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1.2 | ColumnqtechDvmrpRouteInterface | not-accessible | current | The interface number of Dvmrp Route. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1.3 | ColumnqtechDvmrpRouteDistance | read-only | current | For distance, enter the administrative distance to the destination. By default, the administrative distance for DVMRP routes is 0 and take precedence over unic… |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1.4 | ColumnqtechDvmrpRouteMetric | read-only | current | Metric associated with a set of destinations for DVMRP reports. A value of 0 means that the route is not advertised. A value of 32 is equivalent to infinity (u… |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1.5 | ColumnqtechDvmrpRouteUptime | read-only | current | How long (in hours, minutes, and seconds) that the route has been in the DVMRP routing table. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1.6 | ColumnqtechDvmrpRouteExpires | read-only | current | How long (in hours, minutes, and seconds) until the entry is removed from the DVMRP routing table. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1.7 | ColumnqtechDvmrpRouteNextHopAddress | read-only | current | The address of next hop. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1.8 | ColumnqtechDvmrpRouteNextHopInterface | read-only | current | The ifindex of next hop. |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.6.1.9 | ColumnqtechDvmrpRouteStatus | read-write | current | The status of this entry. only be used to destroy the entry disables Dvmrp Route,the satuss of enabled will destroy all entry and disabled only destroy one ent… |
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.7 | NodeqtechDvmrpTraps | |||
| 1.3.6.1.4.1.27514.1.1.10.2.29.1.7.1 | NotificationqtechDvmrpRouteInformation | current | A qtechDvmrpRouteInformation trap signifies the Number of routes is more than The limit of qtechDvmrpRoutehogNotification in one minute, then the trap should b… | |
| 1.3.6.1.4.1.27514.1.1.10.2.29.2 | NodeqtechDvmrpMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.1 | NodeqtechDvmrpMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.1.1 | ComplianceqtechDvmrpMIBCompliance | current | The compliance statement for entities which implement the Qtech DVMRP MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.2 | NodeqtechDvmrpMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.2.1 | GroupqtechDvmrpBaseMIBGroup | current | A collection of general objects providing DVMRP managment. | |
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.2.2 | GroupqtechDvmrpInterfaceMIBGroup | current | A collection of DVMRP interface managment. | |
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.2.3 | GroupqtechDvmrpMetricOffsetMIBGroup | current | A collection of DVMRP metric offset objects. | |
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.2.4 | GroupqtechDvmrpSummaryMIBGroup | current | A collection of DVMRP summary objects. | |
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.2.5 | GroupqtechDvmrpMetricMIBGroup | current | A collection of DVMRP metric objects. | |
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.2.6 | GroupqtechDvmrpRouteMIBGroup | current | A collection of DVMRP route objects. | |
| 1.3.6.1.4.1.27514.1.1.10.2.29.2.2.7 | GroupqtechDvmrpRouteTrapGroup | current | A collection of DVMRP route traps. |