QTECH-FIBER-MIB
74 objects
This module defines qtech fiber module information mibs.
Imported Objects
| QTECH-SMI | qtechMgmt |
| QTECH-TC | IfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.105 | IdentityqtechFiberMIB | This module defines qtech fiber module information mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.105.1 | NodeqtechFiberMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1 | TableqtechFiberTable | not-accessible | current | A table for getting Fiber Module information |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1 | RowqtechFiberEntry | not-accessible | current | Entry of a Fiber Module information. |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.1 | ColumnqtechFiberPortIndex | not-accessible | current | Port index of the port. |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.2 | ColumnqtechFiberPortDescr | read-only | current | Discription of the port. |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.3 | ColumnqtechFiberTransceiverType | read-only | current | Transceiver type of the Fiber module insered into the port. |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.4 | ColumnqtechFiberConnectorType | read-only | current | Connector type of the Fiber module insered into the port. If the transceiver type of Fiber module is unknown(1), then this object contains a zero value. |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.5 | ColumnqtechFiberWavelength | read-only | current | The value of wavelength of the Fiber module insered into the port. If the transceiver type of Fiber module is either fiber100CopperSFP(7) or fiber1000CopperSFP… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.6 | ColumnqtechFiberTransferDistanceSMF | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.7 | ColumnqtechFiberTransferDistance62point5umOM1 | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.8 | ColumnqtechFiberTransferDistance62point5um | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.9 | ColumnqtechFiberTransferDistance50umOM2 | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.10 | ColumnqtechFiberTransferDistance50um | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.11 | ColumnqtechFiberTransferDistance50umOM3 | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.12 | ColumnqtechFiberTransferDistanceEBW50um | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.13 | ColumnqtechFiberTransferDistanceCopper | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.14 | ColumnqtechFiberTransferDistanceCableAssembly | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length of the Cable assembly passive. The value is in u… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.15 | ColumnqtechFiberDDMSupportStatus | read-only | current | This object indicates that whether the Digital Diagnostic Monitors is implemeted. |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.16 | ColumnqtechFiberSerialNumber | read-only | current | The serial number of the Fiber module insered into the port. |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.17 | ColumnqtechFiberTemp | read-only | current | The temperature of the Fiber module insered into the port. The value is in units of degrees Celsius. If the qtechFiberDDMSupportStatus is false, the temperatur… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.18 | ColumnqtechFiberTempStatus | read-only | current | The status ok(2) indicates that the temperature of the Fiber module is in the normal level. The status warning(3) indicates that the temperature of the Fiber m… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.19 | ColumnqtechFiberVoltage | read-only | current | The voltage of the Fiber module insered into the port. The value is in units of mVolts. If the qtechFiberDDMSupportStatus is false, the voltage value is 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.20 | ColumnqtechFiberVoltageStatus | read-only | current | The status ok(2) indicates that the voltage of the Fiber module is in the normal level. The status warning(3) indicates that the voltage of the Fiber module ex… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.21 | ColumnqtechFiberBias | read-only | current | The bias of the Fiber module insered into the port. The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.22 | ColumnqtechFiberBiasStatus | read-only | current | The status ok(2) indicates that the bias of the Fiber module is in the normal level. The status warning(3) indicates that the bias of the Fiber module exceeds … |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.23 | ColumnqtechFiberChannel1Bias | read-only | current | The bias in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber mod… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.24 | ColumnqtechFiberChannel1BiasStatus | read-only | current | The status ok(2) indicates that the bias in the Channel 1 of QSFP+ is in the normal level. The status warning(3) indicates that the bias in the Channel 1 excee… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.25 | ColumnqtechFiberChannel2Bias | read-only | current | The bias in Channel 2 of the QSFP+ Fiber module insered into the port. The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber mod… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.26 | ColumnqtechFiberChannel2BiasStatus | read-only | current | The status ok(2) indicates that the bias in the Channel 2 of QSFP+ is in the normal level. The status warning(3) indicates that the bias in the Channel 2 excee… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.27 | ColumnqtechFiberChannel3Bias | read-only | current | The bias in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber mod… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.28 | ColumnqtechFiberChannel3BiasStatus | read-only | current | The status ok(2) indicates that the bias in the Channel 3 of QSFP+ is in the normal level. The status warning(3) indicates that the bias in the Channel 3 excee… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.29 | ColumnqtechFiberChannel4Bias | read-only | current | The bias in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber mod… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.30 | ColumnqtechFiberChannel4BiasStatus | read-only | current | The status ok(2) indicates that the bias in the Channel 4 of QSFP+ is in the normal level. The status warning(3) indicates that the bias in the Channel 4 excee… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.31 | ColumnqtechFiberRXpowerIntegerpart | read-only | current | The integer part of Rx power of the Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber m… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.32 | ColumnqtechFiberRXpowerDecimalpart | read-only | current | The decimal part of Rx power of the Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber m… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.33 | ColumnqtechFiberRXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3). If the qtechFiberDDMSupportStatus is false or t… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.34 | ColumnqtechFiberRXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power of the Fiber module is in the normal level. The status warning(3) indicates that the Rx power of the Fiber module … |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.35 | ColumnqtechFiberChannel1RXpowerIntegerpart | read-only | current | The integer part of Rx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.36 | ColumnqtechFiberChannel1RXpowerDecimalpart | read-only | current | The decimal part of Rx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.37 | ColumnqtechFiberChannel1RXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3) in Channel 1 of QSFP+. If the qtechFiberDDMSuppo… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.38 | ColumnqtechFiberChannel1RXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power in the Channel 1 of QSFP+ is in the normal level. The status warning(3) indicates that the Rx power in the Channel… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.39 | ColumnqtechFiberChannel2RXpowerIntegerpart | read-only | current | The integer part of Rx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.40 | ColumnqtechFiberChannel2RXpowerDecimalpart | read-only | current | The decimal part of Rx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.41 | ColumnqtechFiberChannel2RXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3) in Channel 2 of QSFP+. If the qtechFiberDDMSuppo… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.42 | ColumnqtechFiberChannel2RXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power in the Channel 2 of QSFP+ is in the normal level. The status warning(3) indicates that the Rx power in the Channel… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.43 | ColumnqtechFiberChannel3RXpowerIntegerpart | read-only | current | The integer part of Rx power in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.44 | ColumnqtechFiberChannel3RXpowerDecimalpart | read-only | current | The decimal part of Rx power in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.45 | ColumnqtechFiberChannel3RXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3) in Channel 3 of QSFP+. If the qtechFiberDDMSuppo… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.46 | ColumnqtechFiberChannel3RXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power in the Channel 3 of QSFP+ is in the normal level. The status warning(3) indicates that the Rx power in the Channel… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.47 | ColumnqtechFiberChannel4RXpowerIntegerpart | read-only | current | The integer part of Rx power in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.48 | ColumnqtechFiberChannel4RXpowerDecimalpart | read-only | current | The decimal part of Rx power in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.49 | ColumnqtechFiberChannel4RXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3) in Channel 4 of QSFP+. If the qtechFiberDDMSuppo… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.50 | ColumnqtechFiberChannel4RXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power in the Channel 4 of QSFP+ is in the normal level. The status warning(3) indicates that the Rx power in the Channel… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.51 | ColumnqtechFiberTXpowerIntegerpart | read-only | current | The integer part of Tx power of the Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber m… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.52 | ColumnqtechFiberTXpowerDecimalpart | read-only | current | The decimal part of Tx power of the Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber m… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.53 | ColumnqtechFiberTXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power of the Fiber module is in the normal level. The status warning(3) indicates that the Tx power of the Fiber module … |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.54 | ColumnqtechFiberChannel1TXpowerIntegerpart | read-only | current | The integer part of Tx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.55 | ColumnqtechFiberChannel1TXpowerDecimalpart | read-only | current | The decimal part of Tx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.56 | ColumnqtechFiberChannel1TXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power in the Channel 1 of QSFP+ is in the normal level. The status warning(3) indicates that the Tx power in the Channel… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.57 | ColumnqtechFiberChannel2TXpowerIntegerpart | read-only | current | The integer part of Tx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.58 | ColumnqtechFiberChannel2TXpowerDecimalpart | read-only | current | The decimal part of Tx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.59 | ColumnqtechFiberChannel2TXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power in the Channel 2 of QSFP+ is in the normal level. The status warning(3) indicates that the Tx power in the Channel… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.60 | ColumnqtechFiberChannel3TXpowerIntegerpart | read-only | current | The integer part of Tx power in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.61 | ColumnqtechFiberChannel3TXpowerDecimalpart | read-only | current | The decimal part of Tx power in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.62 | ColumnqtechFiberChannel3TXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power in the Channel 3 of QSFP+ is in the normal level. The status warning(3) indicates that the Tx power in the Channel… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.63 | ColumnqtechFiberChannel4TXpowerIntegerpart | read-only | current | The integer part of Tx power in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.64 | ColumnqtechFiberChannel4TXpowerDecimalpart | read-only | current | The decimal part of Tx power in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is f… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.65 | ColumnqtechFiberChannel4TXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power in the Channel 4 of QSFP+ is in the normal level. The status warning(3) indicates that the Tx power in the Channel… |
| 1.3.6.1.4.1.27514.1.1.10.2.105.2 | NodeqtechFiberMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.105.2.1 | NodeqtechFiberMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.105.2.1.1 | ComplianceqtechFiberMIBConpliance | current | The compliance statement for entities which implement the Qtech Fiber MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.105.2.2 | NodeqtechFiberMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.105.2.2.1 | GroupqtechFiberMIBGroup | current | A collection of objects providing Fiber managment. |