QTECH-GBNL3-MIB
83 objects
GBN Generic Layer 3 MIB definition.
Imported Objects
| QTECH-GBNL3If-MIB | gbnL3If |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.2.5.1.1 | IdentitygbnL3Mib | GBN Generic Layer 3 MIB definition. | ||
| 1.3.6.1.4.1.27514.1.2.5.1.1.1 | NodegbnL3IpMisc | |||
| 1.3.6.1.4.1.27514.1.2.5.1.1.1.1 | ScalargbnL3IpMiscNumLogicalPorts | read-only | current | The number of logical ports (i.e., L2/L3 hybrid Aggregators or L3 only interfaces). For GBN, this is normally equal to the number of physical ports. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.1.2 | ScalargbnL3IpMiscRouterId | read-write | obsolete | the title of a router it is used when ospf is enable. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.1.3 | ScalargbnL3IpMiscRoutingProtocol | read-write | current | DURABLE: { none } The selected dynamic routing protocol. Note that static routing is still functional even when this object is set to none(1). |
| 1.3.6.1.4.1.27514.1.2.5.1.1.1.4 | ScalargbnL3IpMiscOspfv2Config | read-only | obsolete | This object is used for retrieving the RFC1850 Open Shortest Path First version 2 (OSPFv2) nonvolatile (NVM) configuration data in an ASCII character string fo… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2 | NodegbnL3IpSubnet | |||
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.1 | ScalargbnL3IpSubnetMaxRows | read-only | current | The maximum possible number of rows in the 'gbnL3IpSubnetTable'. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.2 | ScalargbnL3IpSubnetCurrentRows | read-only | current | The current number of rows in the 'gbnL3IpSubnetTable'. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.3 | TablegbnL3IpSubnetTable | not-accessible | current | A table of subnet parameters. There is one entry available for each of the 'gbnL3IpSubnetMaxRows' supported IP subnets. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1 | RowgbnL3IpSubnetEntry | not-accessible | current | A list of subnet parameters. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.1 | ColumngbnL3IpSubnetIfIndex | not-accessible | current | DURABLE: The ifIndex of the swEND driver associated with this subnet. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.2 | ColumngbnL3IpSubnetAgentIpAddr | not-accessible | current | DURABLE: The network management station uses this IP Address to talk with the Agent on this subnet. This IP address logically AND'ed with 'gbnL3IpSubnetMask' y… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.3 | ColumngbnL3IpSubnetMask | read-create | current | DURABLE: The subnet mask for this subnet. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's mus… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.4 | ColumngbnL3IpSubnetVidIface | read-create | current | DURABLE: { default=0:all } For a L2/L3 hybrid switch, this object contains the actual VLAN ID (VID) from 1 to 4094 or 0 if the VID is unassigned. For a L3 only… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.5 | ColumngbnL3IpSubnetName | read-create | current | DURABLE: { '':all ) A user reference name for this subnet. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.3.1.6 | ColumngbnL3IpSubnetRowStatus | read-create | current | DURABLE: This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is n… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.4 | TablegbnL3IpSubnetPrimaryIpTable | not-accessible | current | ��������ip��ַ���� |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.4.1 | RowgbnL3IpSubnetPrimaryIpEntry | not-accessible | current | ��������ip��ַ���� |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.4.1.1 | ColumngbnL3IpSubnetPrimaryIpIfIndex | not-accessible | current | �ӿڵ������� |
| 1.3.6.1.4.1.27514.1.2.5.1.1.2.4.1.2 | ColumngbnL3IpSubnetPrimaryIpIpAddr | read-create | current | �ӿڵ���ip��ַ�� |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3 | NodegbnL3IpStatic | |||
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.1 | ScalargbnL3IpStaticMaxHwHosts | read-only | current | The maximum number, if any, of hosts that the hardware can support in its routing table. Note that if the hardware supports both hosts and subnets in the same … |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.2 | ScalargbnL3IpStaticNumStaticHwHosts | read-write | current | DURABLE: The number of 'gbnL3IpStaticMaxHwHosts' hosts that the user would like to reserve for static routes. A SNMPv1 badValue or SNMPv2 wrongValue is returne… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.3 | ScalargbnL3IpStaticMaxHwSubnets | read-only | current | The maximum number, if any, of subnets that the hardware can support in its routing table. Note that if the hardware supports both hosts and subnets in the sam… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.4 | ScalargbnL3IpStaticNumStaticHwSubnets | read-write | current | DURABLE: The number of 'gbnL3IpStaticMaxHwSubnets' subnets that the user would like to reserve for static routes. An A SNMPv1 badValue or SNMPv2 wrongValue is … |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.5 | ScalargbnL3IpStaticRouteMaxRows | read-only | current | The maximum possible number of rows in the 'gbnL3IpStaticRouteTable'. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.6 | ScalargbnL3IpStaticRouteCurrentRows | read-only | current | The current number of rows in the 'gbnL3IpStaticRouteTable'. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7 | TablegbnL3IpStaticRouteTable | not-accessible | current | A table of static routes. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1 | RowgbnL3IpStaticRouteEntry | not-accessible | current | A list of static route parameters. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.1 | ColumngbnL3IpStaticDestIpAddr | not-accessible | current | DURABLE: The static route host or subnet IP destination address. All IP destination addresses must be non-zero. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.2 | ColumngbnL3IpStaticMask | not-accessible | current | DURABLE: The mask for this IP destination. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's mu… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.3 | ColumngbnL3IpStaticNextHop | not-accessible | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.4 | ColumngbnL3IpStaticName | read-create | current | DURABLE: { '':all ) A user reference name for this Static Route. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.5 | ColumngbnL3IpStaticUseHw | read-create | current | DURABLE: { false:all ) By setting this object to true(1), the user indicates the desire to use hardware routing for this entry. To disable hardware routing for… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.6 | ColumngbnL3IpStaticInHw | read-only | current | If this object is true(1), this static route is actually in the hardware Route Table. Otherwise it is false(2). |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.7 | ColumngbnL3IpStaticGateway | read-create | current | DURABLE: { false:all ) By setting this object to true(1), the user indicates that this subnet route is a gateway route (i.e., connected to external router). By… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.8 | ColumngbnL3IpStaticWeight | read-create | current | Weight of the ecmp route. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.3.7.1.9 | ColumngbnL3IpStaticRowStatus | read-create | current | DURABLE: This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is n… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4 | NodegbnL3IpDynamic | |||
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.1 | ScalargbnL3IpDynamicRouteCurrentRows | read-only | current | The current number of rows in the 'gbnL3IpDynamicRouteTable'. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2 | TablegbnL3IpDynamicRouteTable | not-accessible | current | A table of dynamic routes generated by RIP, OSPF, other routing protocols, and by the TCP/IP stack when creating host routes for existing subnets. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1 | RowgbnL3IpDynamicRouteEntry | not-accessible | current | A list of dynamic route parameters. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.1 | ColumngbnL3IpDynamicDestIpAddr | not-accessible | current | The dynamic route host or subnet IP destination address. All IP destination addresses must be non-zero. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.2 | ColumngbnL3IpDynamicMask | not-accessible | current | The mask for this IP destination. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's must be con… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.3 | ColumngbnL3IpDynamicNextHop | not-accessible | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.4 | ColumngbnL3IpDynamicName | read-create | current | A user reference name for this Dynamic Route. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.5 | ColumngbnL3IpDynamicUseHw | read-create | current | By setting this object to true(1), the user indicates the desire to use hardware routing for this entry. To disable hardware routing for this entry, set this o… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.6 | ColumngbnL3IpDynamicInHw | read-only | current | If this object is true(1), this dynamic route is actually in the hardware Route Table. Otherwise it is false(2). |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.7 | ColumngbnL3IpDynamicGateway | read-create | current | By setting this object to true(1), the user indicates that this subnet route is a gateway route (i.e., connected to external router). By setting it to false(2)… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.8 | ColumngbnL3IpDynamicWeight | read-create | current | Weight of the ecmp route. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.4.2.1.9 | ColumngbnL3IpDynamicRowStatus | read-create | current | This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not suppor… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5 | NodegbnL3IpRoute | |||
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.1 | ScalargbnL3IpRouteTableCurrentSwEntries | read-only | current | The number of current entries in the software Routing Table. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.2 | ScalargbnL3IpRouteCurrentHwHosts | read-only | current | The number of hardware host routing table entries currently in use. If the hardware does not have routing table support, this value is zero (0). If the hardwar… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.3 | ScalargbnL3IpRouteCurrentHwSubnets | read-only | current | The number of hardware subnet routing table entries currently in use. If the hardware does not have routing table support, this value is zero (0). Note that if… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4 | TablegbnL3IpRouteTable | not-accessible | current | Provides Routing Table access. This table can be used to modify or add Routing Table entries. Changes made with this table are not saved to NVM (nonvolatile me… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1 | RowgbnL3IpRouteEntry | not-accessible | current | Provides enough routing information to support the UNIX style 'netstat -nr' command and to support maintenance of the Routing Table. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.1 | ColumngbnL3IpRouteDest | not-accessible | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.2 | ColumngbnL3IpRouteMask | not-accessible | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the gbnL3IpRouteDest field. If the value of the gbnL3I… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.3 | ColumngbnL3IpRouteNextHopIp | not-accessible | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.4 | ColumngbnL3IpRouteNextHopMac | read-only | current | The six byte MAC address of the next hop of this route. If the underlying hardware does not support this object, an octet string of zero length is returned. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.5 | ColumngbnL3IpRouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.6 | ColumngbnL3IpRouteType | read-create | current | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.7 | ColumngbnL3IpRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.8 | ColumngbnL3IpRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.9 | ColumngbnL3IpRouteMetric1 | read-only | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's gbnL3IpRouteProto value… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.10 | ColumngbnL3IpRouteUsingHw | read-only | current | This object is true(1) if this route is contained in the hardware routing table; otherwise, it is false(2). |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.11 | ColumngbnL3IpRouteIsStatic | read-only | current | This object is true(1) if this route is defined in the 'gbnL3IpStaticRouteTable'. This object is false(2) if this route was created dynamically (e.g., with RIP… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.12 | ColumngbnL3IpRouteFlags | read-only | current | Not implemented. Returns '0'. Contains the information required for a netstat-like 'Flags' field. The flags field represents a decimal value of the flags speci… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.13 | ColumngbnL3IpRouteRef | read-only | current | Not implemented. Returns '0'. Contains the information required for the netstat 'Ref' field, which indicates the number active uses for this route. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.14 | ColumngbnL3IpRouteUse | read-only | current | Not implemented. Returns '0'. Contains the information required for the netstat 'Use' field, which indicates the number of packets sent with this route. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.15 | ColumngbnL3IpRouteWeight | read-create | current | Weight of the ecmp route. |
| 1.3.6.1.4.1.27514.1.2.5.1.1.5.4.1.16 | ColumngbnL3IpRouteRowStatus | read-create | current | This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is not suppor… |
| 1.3.6.1.4.1.27514.1.2.5.1.1.6 | NodegbnL3MibConformance | |||
| 1.3.6.1.4.1.27514.1.2.5.1.1.6.1 | NodegbnL3MibGroups | |||
| 1.3.6.1.4.1.27514.1.2.5.1.1.6.1.1 | GroupgbnL3IpMiscGroup | current | This group configures and retrieves global, miscellaneous L3 objects. | |
| 1.3.6.1.4.1.27514.1.2.5.1.1.6.1.2 | GroupgbnL3IpSubnetGroup | current | This group configures and retrieves IP subnet objects. | |
| 1.3.6.1.4.1.27514.1.2.5.1.1.6.1.3 | GroupgbnL3IpStaticGroup | current | This group configures and retrieves IP static routes. | |
| 1.3.6.1.4.1.27514.1.2.5.1.1.6.1.4 | GroupgbnL3IpDynamicGroup | current | This group configures and retrieves IP static routes. | |
| 1.3.6.1.4.1.27514.1.2.5.1.1.6.1.5 | GroupgbnL3IpRouteGroup | current | This group configures and retrieves IP routing info. | |
| 1.3.6.1.4.1.27514.1.2.5.1.1.6.2 | NodegbnL3MibCompliances | |||
| 1.3.6.1.4.1.27514.1.2.5.1.1.6.2.1 | CompliancegbnL3MibCompliance | current | The compliance statement. |