QTECH-GBNPlatformGNLink-MIB
113 objects
GBN GN.Link Enterprise MIB definition.
Imported Objects
| Q-BRIDGE-MIB | PortList |
| QTECH-MASTER-MIB | gbnPlatform |
| RFC1213-MIB | DisplayString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.2.1.2 | IdentitygnlinkMib | GBN GN.Link Enterprise MIB definition. | ||
| 1.3.6.1.4.1.27514.1.2.1.2.1 | ScalarggmpStatus | read-write | current | ggmp status |
| 1.3.6.1.4.1.27514.1.2.1.2.2 | ScalarggmpRole | read-write | current | ggmp lanswitch role |
| 1.3.6.1.4.1.27514.1.2.1.2.3 | TablegbnGgmpLsProTable | not-accessible | current | A Table of Lanswitch property table |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1 | RowgbnGgmpLsProEntry | not-accessible | current | A list of Lanswitch property parameters. |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.1 | ColumnggmplanMAC | read-only | current | MAC address of the regist lanswtich |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.2 | ColumnggmplanswitchName | read-write | current | name of the registered lanswtich . |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.3 | ColumnggmplanDeviceId | read-only | current | Device ID of the regist lanswtich , the highest byte of device id means device type , 2 means TiNet s2008, 3 means TiNet s2016, 4 means TiNet s3024. |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.4 | ColumnggmplanInServerPort | read-only | current | The port which the lanswith regist in server |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.5 | ColumnggmplanPortNumber | read-only | current | The ports number of regist lanswitch |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.6 | ColumnggmplanStatus | read-only | current | The status of regist lanswitch |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.7 | Columnggmplanupportsep | read-write | current | The status of regist lanswitch. If lanswitch is in error status, the return value will be -1. |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.8 | Columnggmppvidrangestart | read-write | current | The start of pvid range of TiNet S2016E/S2024E. If lanswitch is in error status, the return value will be -1. |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.9 | Columnggmplanlocation | read-only | current | The location of the lanswitch |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.10 | ColumnggmplanBSF | read-write | current | Broadcast storm filter value of the lanswitch. If lanswitch is in error status, the return value will be -1. |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.11 | Columnggmpclientver | read-only | current | ggmp client software version |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.12 | ColumnggmplanManageVlanId | read-write | current | ggmp client Manage Vlan |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.13 | ColumnggmplanGrnStp | read-write | current | ggmp client STP switch. If lanswitch is in error status, the return value will be -1. |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.14 | ColumnggmplanHostVer | read-only | current | Host Software Version of the Lanswitch |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.15 | ColumnggmplanOnlineTime | read-only | current | Client Lanswitch Online Time. Unit is second. |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.16 | ColumnggmplanVlanMode | read-write | current | ggmp client vlan mode. port-based vlan means ingress does not check packets' vlan header, 802.1q means ingress checks packets' vlan header. |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.17 | ColumnggmplanMacLearningMode | read-write | current | ggmp client mac-learning mode. ivl means independent vlan learning,svl means share vlan learning. |
| 1.3.6.1.4.1.27514.1.2.1.2.3.1.18 | ColumnggmplanHardwareVersion | read-only | current | client's hardware version,0 means CD version and 1 means CG version. |
| 1.3.6.1.4.1.27514.1.2.1.2.4 | TablegbnGgmpPortPropertyTable | not-accessible | current | A Table of Lanswitch port property table |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1 | RowgbnGgmpPortPropertyEntry | not-accessible | current | A list of Lanswitch port property parameters. |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.1 | Columnggmpport_mac | read-only | current | mac address of the regist lanswtich . |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.2 | Columnggmpport_portnumber | read-only | current | port number of lanswitch |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.3 | Columnggmpport_portclosed | read-write | current | port state of closed or open . |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.4 | Columnggmpport_portlink | read-only | current | the port link status |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.5 | Columnggmpport_portvlanid | read-write | current | The ports default vlan id |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.6 | Columnggmpport_porttagged | read-write | current | The ports tagged or untagged status |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.7 | Columnggmpport_portduplex | read-write | current | The ports duplex |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.8 | Columnggmpport_portactualduplex | read-only | current | The ports actual duplex |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.9 | Columnggmpport_portlockmac | read-write | current | The ports locked mac-address number |
| 1.3.6.1.4.1.27514.1.2.1.2.4.1.10 | Columnggmpport_portgrnstp | read-only | current | The ports grn stp status |
| 1.3.6.1.4.1.27514.1.2.1.2.5 | TablegbnGgmpVlanPropertyTable | not-accessible | current | A Table of Lanswitch vlan property table |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1 | RowgbnGgmpVlanPropertyEntry | not-accessible | current | A list of Lanswitch Vlan property parameters. |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.1 | Columnggmpvlan_mac | read-only | current | mac address of the regist lanswtich . |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.2 | Columnggmpvlan_vlanid | read-only | current | the id of vlan |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.3 | Columnggmpvlan_name | read-only | current | An administratively assigned string, which may be used to identify the VLAN., but TiNet s2008 should not config vlan name |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.4 | Columnggmpvlan_static | read-only | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the foll… |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.5 | Columnggmpvlan_membermap | read-only | current | The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames. |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.6 | Columnggmpvlan_untaggedmap | read-only | current | The set of ports which are transmitting traffic for this VLAN as untagged frames. |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.7 | Columnggmpvlan_addportmap | read-write | current | The set of ports which are transmitting traffic for this VLAN as adding ports. |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.8 | Columnggmpvlan_delportmap | read-write | current | The set of ports which are transmitting traffic for this VLAN as adding ports. |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.9 | Columnggmpvlan_rowstatus | read-write | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.10 | Columnggmpvlan_addtag_portmap | read-write | current | Modify member port of this vlan type to tagged. |
| 1.3.6.1.4.1.27514.1.2.1.2.5.1.11 | Columnggmpvlan_adduntag_portmap | read-write | current | Modify member port of this vlan type to untagged. |
| 1.3.6.1.4.1.27514.1.2.1.2.6 | TablegbnGgmpLsSaveTable | not-accessible | current | A Table that save lanswitch |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1 | RowgbnGgmpLsSaveEntry | not-accessible | current | A Table that save lanswitch |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1.1 | ColumnggmpsaveMAC | read-only | current | MAC address of the regist lanswtich |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1.2 | ColumnggmpsaveStatus | read-write | current | if ggmpsaveStatus is 2, then save the lanswitch whose macaddress is MacAddress. |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1.3 | ColumnggmprebootStatus | read-write | current | if ggmprebootStatus is 2, then reboot the lanswitch whose macaddress is MacAddress. |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1.4 | ColumnggmpresetStatus | read-write | current | if ggmpresetStatus is 2, then reset the lanswitch whose macaddress is MacAddress to default setting. |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1.5 | ColumnggmpSyncLswProperty | read-write | current | Synchronize Lanswitch Property |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1.6 | ColumnggmpSyncPortTable | read-write | current | Synchronize Lanswitch Port Table |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1.7 | ColumnggmpSyncVlanTable | read-write | current | Synchronize Lanswitch Vlan Table |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1.8 | ColumnggmpAllPortTag | read-write | current | Set all port tag property. tagged[bit=1],do not change[bit=0] |
| 1.3.6.1.4.1.27514.1.2.1.2.6.1.9 | ColumnggmpAllPortUntag | read-write | current | Set all port untag property. untagged[bit=1],do not change[bit=0] |
| 1.3.6.1.4.1.27514.1.2.1.2.7 | NodegbnGgmpSvrProperty | |||
| 1.3.6.1.4.1.27514.1.2.1.2.7.1 | ScalarggmpRefusedPort | read-write | current | Refused PortList of Server .enable[bit=1],disable[bit=0]. |
| 1.3.6.1.4.1.27514.1.2.1.2.7.2 | ScalarggmpServerMngVlan | read-write | current | Gnlink vlan in server. |
| 1.3.6.1.4.1.27514.1.2.1.2.7.3 | ScalarggmpClientMngVlan | read-write | current | Gnlink vlan in client. Command node. |
| 1.3.6.1.4.1.27514.1.2.1.2.7.4 | ScalarggmpTrapSwitch | read-write | current | ggmp trap sending switch |
| 1.3.6.1.4.1.27514.1.2.1.2.7.5 | ScalarggmpSvrRequestTimeout | read-write | current | Maximum time that command waiting for its reply |
| 1.3.6.1.4.1.27514.1.2.1.2.7.6 | ScalarggmpSvrClientErrTimeout | read-write | current | Time that server must wait to delete a lanswith in error state |
| 1.3.6.1.4.1.27514.1.2.1.2.7.7 | ScalarggmpSvrClientErrMaxHellos | read-write | current | Times which lanswitch hasn't shankhands with server before being setted to error |
| 1.3.6.1.4.1.27514.1.2.1.2.7.8 | ScalarggmpSvrRequestMaxRetries | read-write | current | Retransmit times for server before sending a command successfully |
| 1.3.6.1.4.1.27514.1.2.1.2.7.9 | ScalarggmpProtocolMacAddr | read-write | current | GN.Link protocol packets' destination MAC address |
| 1.3.6.1.4.1.27514.1.2.1.2.7.10 | ScalarggmpClientAppGetMode | read-write | current | config mode by which to get application from server,ftp or tftp |
| 1.3.6.1.4.1.27514.1.2.1.2.7.11 | ScalarggmpClientAppSvrIpAddr | read-write | current | ggmp client application ftp server ipaddress |
| 1.3.6.1.4.1.27514.1.2.1.2.7.12 | ScalarggmpClientAppFtpSvrUserName | read-write | current | ggmp client application ftp server userName |
| 1.3.6.1.4.1.27514.1.2.1.2.7.13 | ScalarggmpClientAppFtpSvrPassword | read-write | current | ggmp client application ftp server password |
| 1.3.6.1.4.1.27514.1.2.1.2.7.14 | ScalarggmpClientRemoteReboot | read-write | current | config GN.Link server allow client remote reboot |
| 1.3.6.1.4.1.27514.1.2.1.2.8 | TablegbnGgmpLsARLTable | not-accessible | current | A table that is used to search lanswitch ARL table |
| 1.3.6.1.4.1.27514.1.2.1.2.8.1 | RowgbnGgmpLsARLEntry | not-accessible | current | A table that is used to search lanswitch ARL table |
| 1.3.6.1.4.1.27514.1.2.1.2.8.1.1 | Columnggmparl_lanMAC | not-accessible | current | MAC address of the registered lanswtich |
| 1.3.6.1.4.1.27514.1.2.1.2.8.1.2 | Columnggmparl_lanarlMAC | not-accessible | current | MAC address of the registered lanswtich |
| 1.3.6.1.4.1.27514.1.2.1.2.8.1.3 | Columnggmpmac2port | read-only | current | Port id corresponding to the mac address in the last 6 bytes of the index. |
| 1.3.6.1.4.1.27514.1.2.1.2.9 | NodegbnGgmpTrap | |||
| 1.3.6.1.4.1.27514.1.2.1.2.9.1 | NotificationggmpClientPortLoop | current | Client port loop | |
| 1.3.6.1.4.1.27514.1.2.1.2.9.2 | NotificationggmpClientPortLoopFree | current | Client port loop free | |
| 1.3.6.1.4.1.27514.1.2.1.2.9.3 | NotificationggmpClientPortLinkUp | current | Client port link up | |
| 1.3.6.1.4.1.27514.1.2.1.2.9.4 | NotificationggmpClientPortLinkDown | current | Client port link down | |
| 1.3.6.1.4.1.27514.1.2.1.2.9.5 | NotificationggmpClientTurnErr | current | Client turn to error status | |
| 1.3.6.1.4.1.27514.1.2.1.2.9.6 | NotificationggmpClientTurnNormal | current | Client turn to normal status from error status | |
| 1.3.6.1.4.1.27514.1.2.1.2.10 | TableggmpDevClientAppTable | not-accessible | current | Table used to config Lanswitch application table |
| 1.3.6.1.4.1.27514.1.2.1.2.10.1 | RowggmpDevClientAppEntry | not-accessible | current | Table entry for configging clients' application list. |
| 1.3.6.1.4.1.27514.1.2.1.2.10.1.1 | ColumnggmpDevTypeNum | not-accessible | current | This value actually is the same as the index of device id table, please refer to device id table for more details about which value each device corresponds to |
| 1.3.6.1.4.1.27514.1.2.1.2.10.1.2 | ColumnggmpRmtLoadAppType | not-accessible | current | config file type to be loaded :bootrom or host |
| 1.3.6.1.4.1.27514.1.2.1.2.10.1.3 | ColumnggmpDevAppName | read-write | current | ggmp client application filename |
| 1.3.6.1.4.1.27514.1.2.1.2.11 | TableggmpDevRmtLoadTable | not-accessible | current | A Table of Lanswitch application table |
| 1.3.6.1.4.1.27514.1.2.1.2.11.1 | RowggmpDevRmtLoadEntry | not-accessible | current | Table entry for configging/showing clients remote load information. |
| 1.3.6.1.4.1.27514.1.2.1.2.11.1.1 | ColumnggmpRmtLoadDevMac | not-accessible | current | MAC address of the regist lanswtich |
| 1.3.6.1.4.1.27514.1.2.1.2.11.1.2 | ColumnggmpRmtLoadQueIn | read-only | current | current queue in which lanswitch resides |
| 1.3.6.1.4.1.27514.1.2.1.2.11.1.3 | ColumnggmplanRmtLoadPercent | read-only | current | Show the process of loading |
| 1.3.6.1.4.1.27514.1.2.1.2.11.1.4 | ColumnggmplanRmtLoadAppType | read-write | current | config file type to be loaded :bootrom or host or both |
| 1.3.6.1.4.1.27514.1.2.1.2.11.1.5 | ColumnggmplanRmtLoadTime | read-write | current | Time at which lanswitch to be loaded |
| 1.3.6.1.4.1.27514.1.2.1.2.11.1.6 | ColumnggmplanRmtLoadRowStatus | read-create | current | Status of this entry. |
| 1.3.6.1.4.1.27514.1.2.1.2.12 | TableggmpRmtLoadModeTable | not-accessible | current | A Table of Lanswitch application table |
| 1.3.6.1.4.1.27514.1.2.1.2.12.1 | RowggmpRmtLoadModeEntry | not-accessible | current | Table entry for configging/showing remote load mode. |
| 1.3.6.1.4.1.27514.1.2.1.2.12.1.1 | ColumnggmpRmtLoadDevType | not-accessible | current | value '0'means all device,the others actually are the same as the index of device id table,please refer to device id table for more details about which value e… |
| 1.3.6.1.4.1.27514.1.2.1.2.12.1.2 | ColumnggmpRmtLoadmode | read-write | current | Config loading mode:1.load all lanswitchs'host file ,or bootrom file, or both ,at specified time; 2.load all lanswitchs'host file, or bootrom file ,or both, pe… |
| 1.3.6.1.4.1.27514.1.2.1.2.12.1.3 | ColumnggmpRmtLoadModeTime | read-write | current | Config when to load lanswitch.loading time is total number of seconds relative to start point which is '1970/01/01 00:00:00' if remote-load-mode is 'loadAllOnc… |
| 1.3.6.1.4.1.27514.1.2.1.2.12.1.4 | ColumnggmpRmtLoadNewRegAuto | read-write | current | Config if all lanswitchs newly registered are loaded automatically. File to be loaded :host file, bootrom file, or both |
| 1.3.6.1.4.1.27514.1.2.1.2.12.1.5 | ColumnggmpRmtLoadModeRowStatus | read-create | current | Status of this entry. |
| 1.3.6.1.4.1.27514.1.2.1.2.13 | TableggmpGbnDeviceIdTable | not-accessible | current | A Table of Lanswitch id Entry |
| 1.3.6.1.4.1.27514.1.2.1.2.13.1 | RowggmpGbnDeviceIdEntry | not-accessible | current | Table entry for configging lanswitch deviceId information. |
| 1.3.6.1.4.1.27514.1.2.1.2.13.1.1 | ColumnggmpGbnDevIdIndex | not-accessible | current | index of deviceId table,the first 20 entries of id table have been occupied,so index should not less than 21 |
| 1.3.6.1.4.1.27514.1.2.1.2.13.1.2 | ColumnggmpGbnDeviceId | read-write | current | lanswitch's device-id which is the identifier of device-type, first 20 entries of device-id table have been occupied by existing device-types,following details… |
| 1.3.6.1.4.1.27514.1.2.1.2.13.1.3 | ColumnggmpGbnDeviceDesc | read-write | current | lanswitch's device-type name��such as ��TiNet S2008E�� |
| 1.3.6.1.4.1.27514.1.2.1.2.13.1.4 | ColumnggmpGbnDeviceIDRowStatus | read-write | current | Status of this entry. |
| 1.3.6.1.4.1.27514.1.2.1.2.13.1.5 | ColumnggmpGbnDevLowMidHighType | read-write | current | define whether device is low switch or mid-high switch |