QTECH-IGMP-MIB
37 objects
This module defines qtech igmp mibs.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| P-BRIDGE-MIB | EnabledStatus |
| QTECH-SMI | qtechMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.26 | IdentityqtechIgmpMIB | This module defines qtech igmp mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.26.1 | NodeqtechIgmpMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1 | TableqtechIgmpInterfaceTable | not-accessible | current | The (conceptual) table listing the interfaces on which IGMP is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1 | RowqtechIgmpInterfaceEntry | not-accessible | current | An entry (conceptual row) representing an interface on which IGMP is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.1 | ColumnqtechIgmpInterfaceIfIndex | not-accessible | current | The ifIndex value of the interface for which IGMP is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.2 | ColumnqtechIgmpInterfaceQueryInterval | read-write | current | The frequency at which IGMP Host-Query packets are transmitted on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.3 | ColumnqtechIgmpInterfaceVersion | read-write | current | The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function cor… |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.4 | ColumnqtechIgmpInterfaceQuerier | read-only | current | The address of the IGMP Querier on the IP subnet to which this interface is attached. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.5 | ColumnqtechIgmpInterfaceQueryMaxResponseTime | read-write | current | The maximum query response time advertised in IGMPv2 queries on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.6 | ColumnqtechIgmpInterfaceQuerierUpTime | read-only | current | The time since starIgmpInterfaceQuerier was last changed. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.7 | ColumnqtechIgmpInterfaceQuerierExpiryTime | read-only | current | The amount of time remaining before the Other Querier Present Timer expires. If the local system is the querier, the value of this object is zero. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.8 | ColumnqtechIgmpInterfaceVersion1QuerierTimer | read-only | current | The time remaining until the host assumes that there are no IGMPv1 routers present on the interface. While this is non- zero, the host will reply to all querie… |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.9 | ColumnqtechIgmpInterfaceWrongVersionQueries | read-only | current | The number of queries received whose IGMP version does not match igmpInterfaceVersion, over the lifetime of the row entry. IGMP requires that all routers on a … |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.10 | ColumnqtechIgmpInterfaceJoins | read-only | current | The number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache T… |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.11 | ColumnqtechIgmpInterfaceProxyIfIndex | read-only | obsolete | Some devices implement a form of IGMP proxying whereby memberships learned on the interface represented by this row, cause IGMP Host Membership Reports to be s… |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.12 | ColumnqtechIgmpInterfaceGroups | read-only | current | The current number of entries for this interface in the Cache Table. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.13 | ColumnqtechIgmpInterfaceRobustness | read-write | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. … |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.14 | ColumnqtechIgmpInterfaceLastMembQueryIntvl | read-write | current | The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount o… |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.15 | ColumnqtechIgmpInterfaceQuerierPresentTimeout | read-write | current | A timeout interval. If no IGMPv2 queries are heard on this interface within this timeout interval, the local router will take over the Querier on the IP subnet… |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.16 | ColumnqtechIgmpInterfaceLeaves | read-only | current | The number of times a group membership has been removed from this interface; that is, the number of times an entry for this interface has been deleted from the… |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.17 | ColumnqtechIgmpInterfaceAccessGroupAclName | read-write | current | To control the multicast groups that hosts on the subnet serviced by an interface can join,Defalut value means allow all multicast groups can join. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.18 | ColumnqtechIgmpInterfaceEnabled | read-only | current | Evaluates to Enable if this interface are running IGMP. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.19 | ColumnqtechIgmpInterfaceHostVersion | read-only | current | The version of Host which is running on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.2 | TableqtechIgmpInterfaceStaticTable | not-accessible | current | The (conceptual) table listing the interfaces on which IGMP is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.2.1 | RowqtechIgmpInterfaceStaticEntry | not-accessible | current | An entry (conceptual row) representing an interface on which IGMP is enabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.2.1.1 | ColumnqtechIgmpInterfaceStaticInterface | not-accessible | current | The index of interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.2.1.2 | ColumnqtechIgmpInterfaceStaticGroupAddress | not-accessible | current | configed the static group address, the multilayer switch does not accept the packets itself, but only forwards them. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.2.1.3 | ColumnqtechIgmpInterfaceStaticStatus | read-create | current | The status of this entry. Creating the entry enables Igmp static table; destroying the entry disables Igmp static table. |
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.3 | NodeqtechIgmpTraps | |||
| 1.3.6.1.4.1.27514.1.1.10.2.26.1.3.1 | NotificationqtechIgmpVersionConflicted | current | A qtechIgmpVersionErr trap signifies version is different in the interface with host.This trap should be generated when interface run version IGMPV1 and report… | |
| 1.3.6.1.4.1.27514.1.1.10.2.26.2 | NodeqtechIgmpMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.26.2.1 | NodeqtechIgmpMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.26.2.1.1 | ComplianceqtechIgmpMIBCompliance | current | The compliance statement for entities which implement the Qtech IGMP MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.26.2.1.2 | ComplianceigmpExternCompliance | current | The compliance statement for device support of IGMP services. | |
| 1.3.6.1.4.1.27514.1.1.10.2.26.2.2 | NodeqtechIgmpMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.26.2.2.1 | GroupqtechIgmpInterfaceMIBGroup | current | A collection of IGMP interface managment. | |
| 1.3.6.1.4.1.27514.1.1.10.2.26.2.2.2 | GroupqtechIgmpInterfaceStaticMIBGroup | current | A collection of IGMP interface static managment. |