QTECH-INTERFACE-MIB
216 objects
This module defines qtech interface mibs.
Imported Objects
| IANAifType-MIB | IANAifType |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | -- RFC3411 InetAddressType InetAddress |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId |
| QTECH-SMI | qtechMgmt |
| QTECH-TC | ConfigStatus IfIndex |
| RFC1155-SMI | Gauge TimeTicks |
| RFC1213-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.10 | IdentityqtechInterfaceMIB | This module defines qtech interface mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.10.1 | NodeqtechIfConfigMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1 | TableqtechIfTable | not-accessible | current | list of interface basic configuration objects. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1 | RowqtechIfEntry | not-accessible | current | Entry contains interface basic configurations. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.1 | ColumnqtechIfIndex | read-only | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.2 | ColumnqtechIfPortType | read-only | current | Port type of this port, list as above. port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS, and system doesn't distinguish. port1000MBASEF… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.3 | ColumnqtechIfFlowControlAdminStatus | read-create | current | Flow control of a port management status. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.4 | ColumnqtechIfFlowControlOperStatus | read-only | current | Oper status: after the negotiation between two ports connetted the flow contrl status. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.5 | ColumnqtechIfAdminSpeed | read-create | current | port speed settings. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.6 | ColumnqtechIfAdminDuplex | read-create | current | port duplex settings. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.7 | ColumnqtechIfOperSpeed | read-only | current | After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unkn… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.8 | ColumnqtechIfOperDuplex | read-only | current | After two port have negotiated the duplex status, and this object is the working duplex status. while the port link status is down , then the speed status is u… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.9 | ColumnqtechIfManageStatus | read-create | current | Management status of the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.10 | ColumnqtechIfIpBroadcast | read-create | current | Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0 |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.11 | ColumnqtechIfLayer | read-create | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.12 | ColumnqtechIfMode | read-create | current | This value is meaning for only physical port and aggreate port |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.13 | ColumnqtechIfCounterClear | read-create | current | Setting its to any value but 0, will clear counters of this interface. Setting its value to 0 will cause no action of the agent. and when query will always ret… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.14 | ColumnqtechIfEntryStatus | read-create | current | Status of this entry, set this object to valid will create a interface, and set its value to invalid will delete the interface of this entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.15 | ColumnqtechIfMediumType | read-create | current | Port medium type of this port,fiber or copper. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.16 | ColumnqtechIfDownCounter | read-only | current | The counters of linkdown times of the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.17 | ColumnqtechIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.18 | ColumnqtechIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.19 | ColumnqtechIfBcastInhibit | read-write | current | The percentage of the broadcast storm restraint on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.20 | ColumnqtechIfNegotiation | read-write | current | The negotiation status of the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.21 | ColumnqtechIfPhysAddress | read-only | current | The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-spec… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.22 | ColumnqtechIfAdminSpeedRW | read-write | current | port speed settings. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.23 | ColumnqtechIfAdminDuplexRW | read-write | current | port duplex settings. This attribute apply physical port and aggreate port |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.24 | ColumnqtechIfModeRW | read-write | current | This value is meaning for only physical port and aggreate port |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.25 | ColumnqtechIfSpeed | read-only | current | An estimate of the interface's current bandwidth in units of Mbits per second. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.26 | ColumnqtechifAdminStatus | read-write | current | the interface keeps the admin state . |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.27 | ColumnqtechifOperStatus | read-only | current | the interface keeps the oper state . |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.28 | ColumnqtechIfInNUcastPkts | read-only | current | The counter of receiving packets contain BROADCAST and PACKET_MULTICAST . |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.29 | ColumnqtechIfOutNUcastPkts | read-only | current | The counter of sending packets contain BROADCAST and PACKET_MULTICAST . |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.30 | ColumnqtechIfUpDownTimes | read-only | current | The counters of linkup and linkdown times of the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.31 | ColumnqtechifAdminStatusw | read-write | current | The desired state of the interface. When a managed system initializes, all interfaces start with ifAdminStatus in the admindown(1) state. As a result of either… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.32 | ColumnqtechifOperStatusw | read-only | current | The current operational state of the interface. If qtechApIfAdminStatus is admindown(2) then qtechApIfOperStatus should be admindown(2). If qtechApIfAdminStatu… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.33 | ColumnqtechifSpeedw | read-only | current | An estimate of the interface's current bandwidth in units of Mbits per second. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.34 | ColumnqtechifMacAddress | read-only | current | The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-spec… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.35 | ColumnqtechifLastChange | read-only | current | The length of the time that comes current state . |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.36 | ColumnqtechIfInPkts | read-only | current | The number of packets received on this interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of … |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.37 | ColumnqtechIfDiscard | read-only | current | The number of bound packets which were chosen to be discarded even though no errors. One possible reason for discarding such a packet could be to free up buffe… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.38 | ColumnqtechIfBandwidthUsage | read-only | current | Current bandwidth utilization of interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.39 | ColumnqtechIfInBitsRate | read-only | current | The average input packet-rate over a period of time(configuration by interface command 'load-interval') in bits per second on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.40 | ColumnqtechIfInPktRate | read-only | current | The average input packet-rate over a period of time(configuration by interface command 'load-interval') in packets per second on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.41 | ColumnqtechIfOutBitsRate | read-only | current | The average output packet-rate over a period of time(configuration by interface command 'load-interval') in bits per second on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.1.1.42 | ColumnqtechIfOutPktRate | read-only | current | The average output packet-rate over a period of time(configuration by interface command 'load-interval') in packets per second on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.2 | TableqtechIfIpTable | not-accessible | current | A list of interface ip configuration entries. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.2.1 | RowqtechIfIpEntry | not-accessible | current | An entry containing configuration information applicable to a Layer3 interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.2.1.1 | ColumnqtechIfIpIfIndex | read-only | current | A unique value, for each Layer3 interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.2.1.2 | ColumnqtechIfIpId | read-only | current | Type of interface ip address. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.2.1.3 | ColumnqtechIfIp | read-only | current | Ip address of the interface qtechIfIndex refer to. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.2.1.4 | ColumnqtechIfIpMask | read-create | current | Ip mask of the interface ip address. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.2.1.5 | ColumnqtechIfIpEntryStatus | read-create | current | entry status of this entry. and the means in this enviraments can reffer to the text-convention definition of the RowStatus. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.3 | TableqtechIfStatusTable | not-accessible | current | list of interface status. Status information include some error state and result of examining to the interface,etc. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.3.1 | RowqtechIfStatusEntry | not-accessible | current | Entry contains interface status information. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.3.1.1 | ColumnqtechIfStatusIndex | read-only | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.3.1.2 | ColumnqtechIfStatusLoopBackExamine | read-write | current | Setting its to any value but 0, will Checking whether this port or aggreate can receive and send packets normally, It indicates that port or aggreate is normal… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.3.1.3 | ColumnqtechIfErrorStatus | read-only | current | Port's error status information |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.3.1.4 | ColumnqtechIfLineDetect | read-only | current | When reading this object, system detects the quality of line connecting the port. Detect whether the line is broken or short circuit or not. The meaning of the… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.4 | ScalarqtechGlobalIfDisableRecovery | read-write | current | Setting its to any value but 0, the interfaces which is shutted down by some error happened will recovery from disabled status . Setting its value to 0 will ca… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.5 | TableqtechPortTypeChooseTable | not-accessible | current | Table of entrance to choose port type. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.5.1 | RowqtechPortTypeChooseEntry | not-accessible | current | Entrance to choose port type. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.5.1.1 | ColumnqtechPortTypeChooseIndex | read-only | current | The logic port number. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.5.1.2 | ColumnqtechPortTypeChooseType | read-only | current | The chosen port type. This object is used to choose one of the multiple physical ports of different types, when the same logical port is correspondent with the… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.6 | TableqtechIfMTUTable | not-accessible | current | Access table of MTU on interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.6.1 | RowqtechIfMTUEntry | not-accessible | current | Interfac MTU access. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.6.1.1 | ColumnqtechIfMTUIndex | read-only | current | Interface number |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.6.1.2 | ColumnqtechIfMTU | read-write | current | Interface MTU. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.7 | TableqtechIfAvailableBWTable | not-accessible | current | Access table of Available Bandwidth on interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.7.1 | RowqtechIfAvailableBWEntry | not-accessible | current | Interfac available bandwidth access. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.7.1.1 | ColumnqtechIfAvailableBWIfIndex | read-only | current | Interface number |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.7.1.2 | ColumnqtechIfAvailableBWIfBW | read-only | current | Interface available bandwidth(bit). |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.8 | TableqtechIfSVICreatTable | not-accessible | current | Access table of Available Bandwidth on interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.8.1 | RowqtechIfSVICreatEntry | not-accessible | current | Interfac available bandwidth access. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.8.1.1 | ColumnqtechIfSVICreatVlanNum | read-only | current | Interface Vlan number |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.8.1.2 | ColumnqtechIfHandleSVI | read-write | current | 0 creat,1 delete. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.9 | ScalarqtechIfPhyIntNum | read-only | current | The number of physical interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.10 | TableqtechIfLinkUPTimesTable | not-accessible | current | Access table of Available Bandwidth on interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.10.1 | RowqtechIfLinkUPTimesEntry | not-accessible | current | Interfac available bandwidth access. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.10.1.1 | ColumnqtechInterfaceIndex | read-only | current | Interface Index |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.10.1.2 | ColumnqtechIfLinkUPTimes | read-only | current | Vlaues Of Linkup Times. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.11 | TableqtechIfEncapsulationTable | not-accessible | current | Access table of Encapsulation dot1q VLAN on interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.11.1 | RowqtechIfEncapsulationEntry | not-accessible | current | Interfac encapsulation dot1q VLAN access. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.11.1.1 | ColumnqtechIfEncapsulationIndex | read-only | current | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.11.1.2 | ColumnqtechIfEncapsulationVlan | read-write | current | The value indicate the VID of the dot1q vlan encapsulation. The value 0 means de-encapsulation. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.12 | TableqtechApIfNumberTable | not-accessible | current | Access table of ap interface number. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.12.1 | RowqtechApIfNumberEntry | not-accessible | current | Interfac number of ap. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.12.1.1 | ColumnqtechApPhyAddress | read-only | current | The ap's address at its protocol sub-layer. The ap's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For i… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.12.1.2 | ColumnqtechApIfNumber | read-only | current | Vlaues Of interface number. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.12.1.3 | ColumnqtechApIfPhyIntNum | read-only | current | Vlaues Of physical interface number. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13 | TableqtechApIfTable | not-accessible | current | A list of qtechAp interface entries. The number of entries is given by the value of qtechApIfNumber. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1 | RowqtechApIfEntry | not-accessible | current | An entry containing management information qtechApplicable to a particular interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.1 | ColumnqtechApPhysAddress | read-only | current | The ap's address at its protocol sub-layer. The ap's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For i… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.2 | ColumnqtechApIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.3 | ColumnqtechApIfDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the i… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.4 | ColumnqtechApIfType | read-only | current | The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.5 | ColumnqtechApIfMtu | read-only | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.6 | ColumnqtechApIfSpeed | read-only | current | An estimate of the interface's current bandwidth in units of Mbits per second. For interfaces which do not vary in bandwidth or for those where no accurate est… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.7 | ColumnqtechApIfPhysAddress | read-only | current | The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-spec… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.8 | ColumnqtechApIfAdminStatus | read-write | current | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.9 | ColumnqtechApIfOperStatus | read-only | current | The current operational state of the interface. If qtechApIfAdminStatus is admindown(2) then qtechApIfOperStatus should be admindown(3). If qtechApIfAdminStatu… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.10 | ColumnqtechApIfLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.11 | ColumnqtechApIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.12 | ColumnqtechApIfInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.13 | ColumnqtechApIfInNUcastPkts | read-only | deprecated | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discont… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.14 | ColumnqtechApIfInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.15 | ColumnqtechApIfInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.16 | ColumnqtechApIfInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.17 | ColumnqtechApIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.18 | ColumnqtechApIfOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.19 | ColumnqtechApIfOutNUcastPkts | read-only | deprecated | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.20 | ColumnqtechApIfOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.21 | ColumnqtechApIfOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.22 | ColumnqtechApIfOutQLen | read-only | deprecated | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.23 | ColumnqtechApIfLinkUPTimes | read-only | current | Vlaues Of Linkup Times. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.24 | ColumnqtechApIfInDataOctets | read-only | current | The data octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the man… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.25 | ColumnqtechApIfOutDataOctets | read-only | current | The data octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of … |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.26 | ColumnqtechApIfMgmtUploadOctets | read-only | current | The upload octets received on the mgmt interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of … |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.27 | ColumnqtechApIfMgmtDownloadOctets | read-only | current | The download octets transmitted out of the mgmt interface, including framing characters. Discontinuities in the value of this counter can occur at re-initializ… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.28 | ColumnqtechApIfSpeedw | read-only | current | An estimate of the interface's current bandwidth in units of Mbits per second. For interfaces which do not vary in bandwidth or for those where no accurate est… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.29 | ColumnqtechApIfMtuw | read-only | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.30 | ColumnqtechApIfPhysAddressw | read-only | current | The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-spec… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.31 | ColumnqtechApIfInUcastPktsw | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.32 | ColumnqtechApIfInNUcastPktsw | read-only | deprecated | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discont… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.33 | ColumnqtechApIfOutUcastPktsw | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.34 | ColumnqtechApIfOutNUcastPktsw | read-only | deprecated | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.35 | ColumnqtechApIfLinkUPTimesw | read-only | current | The counters of linkup and linkdown times of the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.13.1.36 | ColumnqtechApIfInPkts | read-only | current | The total number of packets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initializatio… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14 | TableqtechIfLinkTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1 | RowqtechIfLinkEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.1 | ColumnqtechIfLinkIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.2 | ColumnqtechIfUplinkInOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.3 | ColumnqtechIfUplinkInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.4 | ColumnqtechIfUplinkInNUcastPkts | read-only | deprecated | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discont… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.5 | ColumnqtechIfUplinkInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.6 | ColumnqtechIfUplinkInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.7 | ColumnqtechIfUplinkOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.8 | ColumnqtechIfUplinkOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.9 | ColumnqtechIfUplinkOutNUcastPkts | read-only | deprecated | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.10 | ColumnqtechIfUplinkOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.11 | ColumnqtechIfUplinkOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.12 | ColumnqtechIfDownlinkInOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.13 | ColumnqtechIfDownlinkInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.14 | ColumnqtechIfDownlinkInNUcastPkts | read-only | deprecated | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discont… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.15 | ColumnqtechIfDownlinkInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.16 | ColumnqtechIfDownlinkInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.17 | ColumnqtechIfDownlinkOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.18 | ColumnqtechIfDownlinkOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.19 | ColumnqtechIfDownlinkOutNUcastPkts | read-only | deprecated | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.20 | ColumnqtechIfDownlinkOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.21 | ColumnqtechIfDownlinkOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.22 | ColumnqtechIfUplinkInBcastPkts | read-only | current | The number of upbound and inbound packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. … |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.23 | ColumnqtechIfUplinkOutBcastPkts | read-only | current | The number of upbound and outbound packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.24 | ColumnqtechIfDownlinkInBcastPkts | read-only | current | The number of downbound and inbound packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.14.1.25 | ColumnqtechIfDownlinkOutBcastPkts | read-only | current | The number of downbound and outbound packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-laye… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15 | NodeqtechIfTrafficStatisticsObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.1 | NodeqtechIfLinkTrafficStatistics | |||
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.1.1 | TableqtechIfLinkTrafficTable | not-accessible | current | A table of link traffic statistics, including interface rate and bandwidth utilization. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.1.1.1 | RowqtechIfLinkTrafficEntry | not-accessible | current | The link traffic statistics entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.1.1.1.1 | ColumnqtechIfLinkTrafficIndex | read-only | current | The link traffic interface index. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.1.1.1.2 | ColumnqtechIfLinkAvgRate | read-only | current | An estimate of the interface's average bandwidth in units of bits per second. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.1.1.1.3 | ColumnqtechIfLinkPeakRate | read-only | current | An estimate of the interface's current peak bandwidth in units of bits per second. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.1.1.1.4 | ColumnqtechIfLinkAvgBWUtilization | read-only | current | An estimate of the interface's average bandwidth Utilization. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.1.1.1.5 | ColumnqtechIfLinkPeakBWUtilization | read-only | current | An estimate of the interface's current peak bandwidth Utilization. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2 | NodeqtechIfLinkQosStatistics | |||
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.1 | TableqtechLinkQosCtlTable | not-accessible | current | The results of these operations are stored in the qtechLinkQosResultsTable |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.1.1 | RowqtechLinkQosCtlEntry | not-accessible | current | Defines an entry in the qtechLinkQosCtlTable. The first index element, qtechLinkQosCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows … |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.1.1.1 | ColumnqtechLinkQosCtlOwnerIndex | not-accessible | current | To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which mul… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.1.1.2 | ColumnqtechLinkQosCtlTestName | not-accessible | current | The name of the ping-based test. This is locally unique, within the scope of a qtechLinkQosCtlOwnerIndex. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.1.1.3 | ColumnqtechLinkQosCtlTargetAddressType | read-create | current | Specifies the type of host address to be used at a remote host for performing a ping-based operation. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.1.1.4 | ColumnqtechLinkQosCtlTargetAddress | read-create | current | Specifies the host address to be used at a remote host for performing a ping-based operation. The host address type is determined by the value of the correspon… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.1.1.5 | ColumnqtechLinkQosCtlAdminStatus | read-create | current | Reflects the desired state that a qtechLinkQosCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this qtechLinkQosCtlEntry. disable… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.1.1.6 | ColumnqtechLinkQosCtlRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2 | TableqtechLinkQosResultsTable | not-accessible | current | The results of these operations are stored in the qtechLinkQosResultsTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1 | RowqtechLinkQosResultsEntry | not-accessible | current | Defines an entry in the qtechLinkQosResultsTable. The qtechLinkQosResultsTable has the same indexing as the qtechLinkQosCtlTable so that a qtechLinkQosResultsE… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1.1 | ColumnqtechLinkQosResultsOperStatus | read-only | current | Reflects the operational state of a qtechLinkQosCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped. completed(3) - Test is completed. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1.2 | ColumnqtechLinkQosResultsIpTargetAddressType | read-only | current | This object indicates the type of address stored in the corresponding qtechLinkQosResultsIpTargetAddress object. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1.3 | ColumnqtechLinkQosResultsIpTargetAddress | read-only | current | This object reports the IP address associated with a qtechLinkQosCtlTargetAddress value when the destination address is specified as a DNS name. The value of t… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1.4 | ColumnqtechLinkQosResultsMaxRtt | read-only | current | The maximum packet round-trip-time (RTT) that received. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1.5 | ColumnqtechLinkQosResultsMinRtt | read-only | current | The minimum packet round-trip-time (RTT) that received. A value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1.6 | ColumnqtechLinkQosResultsAverageRtt | read-only | current | The current average packet round-trip-time (RTT). |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1.7 | ColumnqtechLinkQosResultsDelayJitter | read-only | current | This object contains the sum of the squares for all ping responses received. Its purpose is to enable standard deviation calculation. The estimate value of the… |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1.8 | ColumnqtechLinkQosResultsPktsLossRate | read-only | current | The packets loss rate of the link. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.2.2.1.9 | ColumnqtechLinkQosResultsNetworkAF | read-only | current | The network availability factor. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3 | NodeqtechIfDeviceTrafficStatistics | |||
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1 | TableqtechIfDeviceTrafficTable | not-accessible | current | A table of device traffic statistics. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1 | RowqtechIfDeviceTrafficEntry | not-accessible | current | Device traffic statistics entry |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.1 | ColumnqtechIfDeviceTrafficIndex | read-only | current | The device traffic interface index. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.2 | ColumnqtechIfFC | read-only | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.3 | ColumnqtechIfFCTransRate | read-only | current | The transmission rate of the FC. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.4 | ColumnqtechIfFCTransPktsNum | read-only | current | The transmission packets number of the FC. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.5 | ColumnqtechIfFCDiscardRate | read-only | current | The discard rate of the FC. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.6 | ColumnqtechIfFCDiscardPktsNum | read-only | current | The discard packets number of the FC. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.7 | ColumnqtechIfFCPktsLossRate | read-only | current | The packets loss rate of the FC. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.8 | ColumnqtechIfFCBandwidthRate | read-only | current | The bandwidth rate of the FC. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.9 | ColumnqtechIfFCBandwidthPercentage | read-only | current | The bandwidth percentage of the FC. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.10 | ColumnqtechIfDeviceFCGathers | read-only | current | Gathers of the device FC. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.11 | ColumnqtechIfFullMeshFCGathers | read-only | current | Gathers of the whole network FC. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.12 | ColumnqtechIfClassBasedGathers | read-only | current | Class-based Gathers. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.13 | ColumnqtechIfNodeBasedGathers | read-only | current | Node-based Gathers. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.14 | ColumnqtechIfNodeClassBasedGathers | read-only | current | Node&class-based Gathers. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.15 | ColumnqtechIfNodeFCBasedGathers | read-only | current | Node&FC-based Gathers. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.1.15.3.1.1.16 | ColumnqtechIfNodeDeviceFCBasedGathers | read-only | current | Node&device&FC-based Gathers. |
| 1.3.6.1.4.1.27514.1.1.10.2.10.2 | NodeqtechInterfaceTraps | |||
| 1.3.6.1.4.1.27514.1.1.10.2.10.2.1 | ScalarlineDetectStatus | accessible-for-notify | current | The type of storm of interface |
| 1.3.6.1.4.1.27514.1.1.10.2.10.2.2 | ScalarlineDetectPosition | accessible-for-notify | current | Location where the break or short circuit in the line happens (Distance from the switch port, in metre.) |
| 1.3.6.1.4.1.27514.1.1.10.2.10.2.3 | NotificationlineQualityDetect | current | The notification of discovering a break or short circuit in the line, or restoring the line to the normal state. | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.3 | NodeqtechInterfaceMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.10.3.1 | NodeqtechInterfaceMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.10.3.1.1 | ComplianceqtechInterfaceMIBCompliance | current | The compliance statement for entities which implement the Qtech Interface MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.3.2 | NodeqtechInterfaceMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.10.3.2.1 | GroupqtechInterfaceMIBGroup | current | A collection of objects providing interface basic configure . | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.3.2.2 | GroupqtechPortTypeChooseMibGroup | current | Information collection of choosing port type. | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.3.2.3 | GroupqtechIfMTUMibGroup | current | Interface MTU information collection. | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.3.2.4 | GroupqtechIfLineDetectGroup | current | Information collection of line quality detection. | |
| 1.3.6.1.4.1.27514.1.1.10.2.10.3.2.5 | GroupqtechIfAvailableBWMibGroup | current | Interface available bandwidth information collection. |