MIB Viewer

QTECH-MPLS-VPN-MGMT-MIB

40 objects
This module defines qtech mpls VPN management mibs.
OIDNameAccessStatusDescription
1.3.6.1.4.1.27514.1.1.10.2.122IdentityqtechMplsVPNMgmtMIBThis module defines qtech mpls VPN management mibs.
1.3.6.1.4.1.27514.1.1.10.2.122.1NodeqtechMplsVPNMgmtMIBObjects
1.3.6.1.4.1.27514.1.1.10.2.122.1.1NodeqtechMplsVPNMgmtVrf
1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1TableqtechMplsVPNMgmtVrfTablenot-accessiblecurrentThis table specified qtech mpls l3vpn vrf information.
1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1RowqtechMplsVPNMgmtVrfEntrynot-accessiblecurrentEach entry in this table is meant to correspond to an entry in the Vrf table.
1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1.1ColumnqtechMplsVPNMgmtVrfNameread-onlycurrentThe human-readable name of this VPN.
1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1.2ColumnqtechMplsVPNMgmtVrfIntfFaultread-onlycurrentIndicates the number of fault in the interface binding this vrf.
1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1.3ColumnqtechMplsVPNMgmtVrfVpnIdread-onlycurrentThe VPN ID as specified in [RFC2685]. If a VPN ID has not been specified for this VRF, then this variable SHOULD be set to a zero-length OCTET STRING.
1.3.6.1.4.1.27514.1.1.10.2.122.1.1.1.1.4ColumnqtechMplsVPNMgmtVrfVpnIdTyperead-onlycurrentThe VPN ID Type
1.3.6.1.4.1.27514.1.1.10.2.122.1.2NodeqtechMplsVPNMgmtRoute
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1TableqtechMplsVPNMgmtVrfRteTablenot-accessiblecurrentThis table specified MPLS L3VPN VRF table routing information.
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1RowqtechMplsVPNMgmtVrfRteEntrynot-accessiblecurrentEach entry in this table contained the routing infomation in one's vrf.
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.1ColumnqtechMplsVPNMgmtRteDestTyperead-onlycurrentThe type of the qtechMplsVPNMgmtRteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are all…
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.2ColumnqtechMplsVPNMgmtRteDestread-onlycurrentThe destination IP address of this route. The type of this address is determined by the value of the qtechMplsVPNMgmtRteDestType object.
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.3ColumnqtechMplsVPNMgmtRtePfxLenread-onlycurrentIndicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the qtechMpl…
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.4ColumnqtechMplsVPNMgmtRtePolicyread-onlycurrentThis object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to th…
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.5ColumnqtechMplsVPNMgmtRteNHopTyperead-onlycurrentThe type of the qtechMplsVPNMgmtRteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those addr…
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.6ColumnqtechMplsVPNMgmtRteNextHopread-onlycurrentOn remote routes, the address of the next system en route. For non-remote routes, a zero-length string. The type of this address is determined by the value of …
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.7ColumnqtechMplsVPNMgmtRteDscpread-onlycurrentThe Differentiated Services Code-Point of this vrf route.
1.3.6.1.4.1.27514.1.1.10.2.122.1.2.1.1.8ColumnqtechMplsVPNMgmtRteStorageTyperead-onlycurrentThe storage type of this vrf route entry.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3NodeqtechMplsVPNMgmtQos
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1NodeqtechMplsVPNMgmtQosLSP
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.1ScalarqtechMplsVPNMgmtLSPNumread-onlycurrentTotal number of the working LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.2ScalarqtechMplsVPNMgmtBackupLSPNumread-onlycurrentTotal number of the backup LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.3ScalarqtechMplsVPNMgmtLDPLSPNumread-onlycurrentTotal number of the LDP LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.4ScalarqtechMplsVPNMgmtBGPLSPNumread-onlycurrentTotal number of the BGP LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.5ScalarqtechMplsVPNMgmtStaticLSPNumread-onlycurrentTotal number of the static LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.6ScalarqtechMplsVPNMgmtCRLDPLSPNumread-onlycurrentTotal number of the CR-LDP LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.7ScalarqtechMplsVPNMgmtRsvpLSPNumread-onlycurrentTotal number of the RSVP LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.8ScalarqtechMplsVPNMgmtBFDLSPNumread-onlycurrentTotal number of the LSP which detecting by BFD.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.9ScalarqtechMplsVPNMgmtOAMLSPNumread-onlycurrentTotal number of the LSP which detecting by OAM.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.10ScalarqtechMplsVPNMgmtIngressLSPNumread-onlycurrentTotal number of the Ingress LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.11ScalarqtechMplsVPNMgmtTransitLSPNumread-onlycurrentTotal number of the transit LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.1.12ScalarqtechMplsVPNMgmtEgressLSPNumread-onlycurrentTotal number of the Egress LSPs.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.2NodeqtechMplsVPNMgmtQosFault
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.2.1ScalarqtechMplsLSPFaultBFDread-onlycurrentThe count of the fault which is detected by BFD.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.2.2ScalarqtechMplsLSPFaultOAMread-onlycurrentThe count of the fault which is detected by OAM.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.2.3ScalarqtechMplsVrfFaultread-onlycurrentThe count of the L3VPN VRF fault.
1.3.6.1.4.1.27514.1.1.10.2.122.1.3.2.4ScalarqtechMplsPWFaultread-onlycurrentThe count of the L2VPN PW fault.
1.3.6.1.4.1.27514.1.1.10.2.122.2NodeqtechMplsVPNMgmtMIBConformance