QTECH-MULTICAST-MIB
79 objects
This module defines qtech multicast mibs.
Imported Objects
| IANA-RTPROTO-MIB | IANAipMRouteProtocol |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanId |
| QTECH-SMI | qtechMgmt |
| QTECH-TC | IfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.28 | IdentityqtechMultMIB | This module defines qtech multicast mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.28.1 | NodeqtechMultMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1 | TableqtechIpMRouteInterfaceTable | not-accessible | current | The (conceptual) table containing multicast routing information specific to interfaces. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1 | RowqtechIpMRouteInterfaceEntry | not-accessible | current | An entry (conceptual row) containing the multicast routing information for a particular interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1.1 | ColumnqtechIpMRouteInterfaceIfIndex | not-accessible | current | The ifIndex value of the interface for which this entry contains information. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1.2 | ColumnqtechIpMRouteInterfaceTtl | read-write | current | The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The defau… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1.3 | ColumnqtechIpMRouteInterfaceProtocol | read-only | current | The routing protocol running on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1.4 | ColumnqtechIpMRouteInterfaceRateLimit | read-write | current | The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1.5 | ColumnqtechIpMRouteInterfaceInMcastOctets | read-only | current | The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is similar to ifInOctets in the Interfa… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1.6 | ColumnqtechIpMRouteInterfaceOutMcastOctets | read-only | current | The number of octets of multicast packets that have been sent on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1.7 | ColumnqtechIpMRouteInterfaceHCInMcastOctets | read-only | current | The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is a 64-bit version of ipMRouteInterfac… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1.8 | ColumnqtechIpMRouteInterfaceHCOutMcastOctets | read-only | current | The number of octets of multicast packets that have been sent on the interface. This object is a 64-bit version of ipMRouteInterfaceOutMcastOctets. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.1.1.9 | ColumnqtechIpMRouteBoundaryAclName | read-write | current | The name of an access list. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.2 | TableqtechIpRpfTable | not-accessible | current | The (conceptual) table listing the router's scoped multicast address boundaries. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.2.1 | RowqtechIpRpfEntry | not-accessible | current | An entry (conceptual row) in the starIpRpfTable representing a scoped boundary. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.2.1.1 | ColumnqtechIpRpfSourceAddress | not-accessible | current | source address that this information concerns. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.2.1.2 | ColumnqtechIpRpfInterface | read-only | current | For the given source, interface from which the router expects to get packets. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.2.1.3 | ColumnqtechIpRpfNeighborAddress | read-only | current | For given source, neighbor from which the router expects to get packets. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.2.1.4 | ColumnqtechIpRpfRouteAddress | read-only | current | Route address and mask that matched against this source. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.2.1.5 | ColumnqtechIpRpfRouteMask | read-only | current | Route address and mask that matched against this source. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.2.1.6 | ColumnqtechIpRpfType | read-only | current | Routing table from which this route was obtained, either unicast, or DVMRP mroutes. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3 | TableqtechMPingTable | not-accessible | current | generate multicast traffic in the lab to test the multicast tree since it pings all members of the group, and all members respond. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3.1 | RowqtechMPingEntry | not-accessible | current | An entry (conceptual row) in the starMPingTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3.1.1 | ColumnqtechMPingIndex | not-accessible | current | Object which specifies a unique entry in the qtechPingTable. A management station wishing to initiate a ping operation should use a pseudo-random value for thi… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3.1.2 | ColumnqtechMPingGroupAddress | not-accessible | current | The address of group. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3.1.3 | ColumnqtechMPingGroupMember | not-accessible | current | The address of Member. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3.1.4 | ColumnqtechMPingResponseTime | read-only | current | The response time of member. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3.1.5 | ColumnqtechMPingDataLength | read-create | current | Pinged ICMP echo datagram's data length. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3.1.6 | ColumnqtechMPingTimeOuts | read-create | current | Ping but no echo from required address, the time last for time out, in milliseconds. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3.1.7 | ColumnqtechMPingCompleted | read-only | current | While the ping process has completed the value of this field will be true(1), else false(2). |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.3.1.8 | ColumnqtechMPingEntryStauts | read-create | current | entry status for this list. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4 | TableqtechIpMRouteTable | not-accessible | current | The (conceptual) table containing multicast routing information for IP datagrams sent by particular sources to the IP multicast groups known to this router. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1 | RowqtechIpMRouteEntry | not-accessible | current | An entry (conceptual row) containing the multicast routing information for IP datagrams from a particular source and addressed to a particular IP multicast gro… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.1 | ColumnqtechIpMRouteGroup | not-accessible | current | The address of group. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.2 | ColumnqtechIpMRouteSource | not-accessible | current | The address of Souce. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.3 | ColumnqtechIpMRouteSourceMask | not-accessible | current | The Mask of Souce address. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.4 | ColumnqtechIpMRouteRP | read-only | current | The address of RP Route. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.5 | ColumnqtechIpMRoutePruneFlag | read-only | current | Boolean, indicates whether this route is pruned. A pruned route is one that has an empty outgoing interface list or all interfaces are in Pruned state. A multi… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.6 | ColumnqtechIpMRouteSparseFlag | read-only | current | Boolean, indicating PIM multicast routing protocol sparse-mode (versus dense-mode). In sparse-mode, packets are forwarded only out interfaces that have been jo… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.7 | ColumnqtechIpMRouteConnectedFlag | read-only | current | Boolean, indicating whether there is a directly connected member for a group attached to the router. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.8 | ColumnqtechIpMRouteLocalFlag | read-only | current | Boolean, indicating whether local system is a member of a group on any interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.9 | ColumnqtechIpMRouteRegisterFlag | read-only | current | Boolean, indicates whether to send registers for the entry. A first hop router directly connected to a multicast source host, as well as a border router on the… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.10 | ColumnqtechIpMRouteRpFlag | read-only | current | Boolean, indicating whether there is a Prune state for this source along the shared tree. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.11 | ColumnqtechIpMRouteSptFlag | read-only | current | Boolean, indicating whether data is being received on the SPT tree, ie the Shortest Path Tree. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.12 | ColumnqtechIpMRouteInLimit | read-only | obsolete | Incoming interface's limit for rate limiting data traffic, in Kbps. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.13 | ColumnqtechIpMRouteLifeAvg | read-only | current | The average of data traffic. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.14 | ColumnqtechIpMrouteGroupPktsCount | read-only | current | The count of group packets. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.15 | ColumnqtechIpMrouteSouceCount | read-only | current | The count of souce. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.16 | ColumnqtechIpMrouteRpPkts | read-only | current | The packets count of Rp-Tree . |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.17 | ColumnqtechIpMrouteRpPktsPerSec | read-only | current | The packets count which Rp-Tree send in one second. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.18 | ColumnqtechIpMrouteRpAvgPktsSize | read-only | current | The average packets size which Rp-Tree send . |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.19 | ColumnqtechIpMrouteRpKilobitsPerSec | read-only | current | Kilobits of Rp-Tree send in one second . |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.20 | ColumnqtechIpMrouteSoucePkts | read-only | current | The packets count of souce . |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.21 | ColumnqtechIpMrouteSoucePktsPerSec | read-only | current | The packets count which souce send in one second. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.22 | ColumnqtechIpMrouteSouceAvgPktsSize | read-only | current | The average packets size which souce send . |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.4.1.23 | ColumnqtechIpMrouteSouceKilobitsPerSec | read-only | current | Kilobits of Souce send in one second . |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.5 | TableqtechMrinfoTable | not-accessible | current | The (conceptual) table containing multicast routing information for PIM neighbor. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.5.1 | RowqtechMrinfoEntry | not-accessible | current | An entry (conceptual row) of starMrinfoTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.5.1.1 | ColumnqtechMrinfoIfAddress | not-accessible | current | The address of Interface Router to request. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.5.1.2 | ColumnqtechMrinfoNeighbor | read-only | current | The address of Interface neighbor,if there is no neigbor then return 0.0.0.0. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.5.1.3 | ColumnqtechMrinfoTtlThreshold | read-only | current | The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The defau… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.5.1.4 | ColumnqtechMrinfoMetricOffset | read-only | current | Value added to the metric of a DVMRP route advertised in a report message. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.5.1.5 | ColumnqtechMrinfoQuerier | read-only | current | If this interface is querier then the value of this field will be true(1), else false(2). |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.5.1.6 | ColumnqtechMrinfoDown | read-only | current | If this interface is down then the value of this field will be true(1), else false(2). |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.5.1.7 | ColumnqtechMrinfoLeaf | read-only | current | If locoal switch is leaf switch then the value of this field will be true(1), else false(2). |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.6 | TableqtechMultVidTable | not-accessible | current | The (conceptual) table containing multicast routing vlan id for interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.6.1 | RowqtechMultVidEntry | not-accessible | current | An entry (conceptual row) of qtechMultVidTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.6.1.1 | ColumnqtechMultInterfaceIfIndex | not-accessible | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.28.1.6.1.2 | ColumnqtechMultVlan | read-write | current | The value indicate the VID of the vlan which that this port belong to. This field is effective for only trunk port.The default value indicate the VID of the na… |
| 1.3.6.1.4.1.27514.1.1.10.2.28.2 | NodeqtechMultMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.28.2.1 | NodeqtechMultMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.28.2.1.1 | ComplianceqtechMultMIBCompliance | current | The compliance statement for entities which implement the Qtech MULTICAST MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.28.2.2 | NodeqtechMultMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.28.2.2.1 | GroupqtechIpMRouteInterfaceMIBGroup | current | A collection of IP multicast route interface managment. | |
| 1.3.6.1.4.1.27514.1.1.10.2.28.2.2.2 | GroupqtechIpRpfMIBGroup | current | A collection of IP RPF managment. | |
| 1.3.6.1.4.1.27514.1.1.10.2.28.2.2.3 | GroupqtechMPingMIBGroup | current | A collection of multicast ping managment. | |
| 1.3.6.1.4.1.27514.1.1.10.2.28.2.2.4 | GroupqtechIpMRouteMIBGroup | current | A collection of IP multicast route managment. | |
| 1.3.6.1.4.1.27514.1.1.10.2.28.2.2.5 | GroupqtechMrinfoMIBGroup | current | A collection of multicast information | |
| 1.3.6.1.4.1.27514.1.1.10.2.28.2.2.6 | GroupqtechMultVidMIBGroup | current | A collection of multicast vid information |