QTECH-NMS-SERIAL
30 objects
No module-level DESCRIPTION found.
Imported Objects
| QTECH-NMS-SMI | nmsMgmt |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress |
| RFC1213-MIB | DisplayString ifDescr |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.34751.9.193 | NodenmsSerial | |||
| 1.3.6.1.4.1.34751.9.193.1 | NodeserialSession | |||
| 1.3.6.1.4.1.34751.9.193.1.1 | ScalarserialSessionTcpServerPort | read-write | mandatory | Serial session for TCP server port number. |
| 1.3.6.1.4.1.34751.9.193.1.2 | ScalarserialSessionTcpClientPort | read-write | mandatory | Serial session for TCP client port number. |
| 1.3.6.1.4.1.34751.9.193.1.3 | ScalarserialSessionTcpClientSvrAddr | read-write | mandatory | Serial session for TCP client service address. |
| 1.3.6.1.4.1.34751.9.193.1.4 | ScalarserialSessionTcpAction | write-only | mandatory | Serial session for TCP server parameters setting action. When set to 0,the value of SerialSessionTcpServerPort, SerialSessionTcpClientPort and SerialSessionTcp… |
| 1.3.6.1.4.1.34751.9.193.1.5 | ScalarserialSessionUdpClientPort | read-write | mandatory | Serial session for UDP client port number. |
| 1.3.6.1.4.1.34751.9.193.1.6 | ScalarserialSessionUdpClientSvrAddr | read-write | mandatory | Serial session for UDP client service address. |
| 1.3.6.1.4.1.34751.9.193.1.7 | ScalarserialSessionUdpAction | write-only | mandatory | Serial session for TCP server parameters setting action. When set to 0,the value of SerialSessionUdpClientPort and SerialSessionUdpClientSvrAddr will be set to… |
| 1.3.6.1.4.1.34751.9.193.1.8 | ScalarserialSessionNoServer | write-only | mandatory | Close serial session. |
| 1.3.6.1.4.1.34751.9.193.2 | TablenmsSerialPortTable | not-accessible | mandatory | A list of serial port table entries. |
| 1.3.6.1.4.1.34751.9.193.2.1 | RownmsSerialPortEntry | not-accessible | mandatory | A collection of additional objects in the serial port table. |
| 1.3.6.1.4.1.34751.9.193.2.1.1 | ColumnserialPortIndex | read-only | mandatory | Serial interface id, unique in system. |
| 1.3.6.1.4.1.34751.9.193.2.1.2 | ColumnserialPortMode | read-write | mandatory | Serial interface mode. |
| 1.3.6.1.4.1.34751.9.193.2.1.3 | ColumnserialPortSpeed | read-write | mandatory | Serial interface speed. |
| 1.3.6.1.4.1.34751.9.193.2.1.4 | ColumnserialPortDataBits | read-write | mandatory | Serial interface data bits. |
| 1.3.6.1.4.1.34751.9.193.2.1.5 | ColumnserialPortHaltBits | read-write | mandatory | Serial interface halt bits. |
| 1.3.6.1.4.1.34751.9.193.2.1.6 | ColumnserialPortParity | read-write | mandatory | Serial interface parity. |
| 1.3.6.1.4.1.34751.9.193.2.1.7 | ColumnserialPortFlowControl | read-write | mandatory | Serial interface flow control. |
| 1.3.6.1.4.1.34751.9.193.2.1.8 | ColumnserialPortDataReadInterval | read-write | mandatory | Serial interface data read interval. The unit is mili-second. |
| 1.3.6.1.4.1.34751.9.193.2.1.9 | ColumnserialPortReadTrigger | read-write | mandatory | Serial interface read trigger. |
| 1.3.6.1.4.1.34751.9.193.2.1.10 | ColumnserialPortKeepaliveMode | read-write | mandatory | Serial interface keepalive mode. |
| 1.3.6.1.4.1.34751.9.193.2.1.11 | ColumnserialPortLoopback | read-write | mandatory | Serial interface loopback test. |
| 1.3.6.1.4.1.34751.9.193.3 | NodenmsSerialTrap | |||
| 1.3.6.1.4.1.34751.9.193.3.1 | ScalarnmsSerialBreak | not-accessible | mandatory | Serial port status change.0-break, 1-recover. |
| 1.3.6.1.4.1.34751.9.193.3.2 | ScalarnmsLoopbackDetectResult | not-accessible | mandatory | Serial port status change reason. |
| 1.3.6.1.4.1.34751.9.193.3.3 | NodenmsSerialBreakNotifications | |||
| 1.3.6.1.4.1.34751.9.193.3.3.1 | NotificationnmsSerialBreakNotification | current | The agent generates this notification when serial interface status changes . | |
| 1.3.6.1.4.1.34751.9.193.3.4 | NodenmsLoopbackDetectResultNotifications | |||
| 1.3.6.1.4.1.34751.9.193.3.4.1 | NotificationnmsLoopbackDetectResultNotification | current | The agent generates this notification when serial port get a loopback result. |