QTECH-NTP-MIB
24 objects
This module defines qtech ntp mibs.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| QTECH-SMI | qtechMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.49 | IdentityqtechNtpMIB | This module defines qtech ntp mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.49.1 | NodeqtechNtpMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1 | NodeqtechntpSystem | |||
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.1 | ScalarqtechntpSysLeap | read-write | current | Two-bit code warning of an impending leap second to be inserted in the NTP timescale. This object can be set only when the qtechntpSysStratum has a value of 1. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.2 | ScalarqtechntpSysStratum | read-write | current | The stratum of the local clock. If the value is set to 1, i.e., this is a primary reference, then the Primary-Clock procedure described in Section 3.4.6, in RF… |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.3 | ScalarqtechntpSysPrecision | read-only | current | Signed integer indicating the precision of the system clock, in seconds to the nearest power of two. The value must be rounded to the next larger power of two;… |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.4 | ScalarqtechntpSysRootDelay | read-only | current | A signed fixed-point number indicating the total round-trip delay in seconds, to the primary reference source at the root of the synchronization subnet. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.5 | ScalarqtechntpSysRootDispersion | read-only | current | The maximum error in seconds, relative to the primary reference source at the root of the synchronization subnet. Only positive values greater than zero are po… |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.6 | ScalarqtechntpSysRefId | read-only | current | The reference identifier of the local clock. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.7 | ScalarqtechntpSysRefTime | read-only | current | The local time when the local clock was last updated. If the local clock has never been synchronized, the value is zero. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.8 | ScalarqtechNTPServerIPAdd | read-write | current | NTP Server address. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.9 | ScalarqtechTimeAfterNTPCal | read-only | current | Time After NTP Call. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.10 | ScalarqtechTimeSyncPeriod | read-write | current | Time Sync Period. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.11 | TableqtechNtpServerTable | not-accessible | current | The table about NTP server infomation. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.11.1 | RowqtechNtpServerEntry | not-accessible | current | The entry of qtechNtpServerTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.11.1.1 | ColumnqtechNtpServerNetType | read-only | current | Address type of NTP server: ipv4(1), ipv6(2) |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.11.1.2 | ColumnqtechNtpServerNetAddr | read-only | current | Address of NTP server. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.11.1.3 | ColumnqtechNtpServerVersion | read-create | current | Version of NTP server. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.1.1.11.1.4 | ColumnqtechNtpServerStatus | read-create | current | RowStatus of NTP server. |
| 1.3.6.1.4.1.27514.1.1.10.2.49.2 | NodeqtechNtpMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.49.2.1 | NodeqtechNtpMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.49.2.1.1 | ComplianceqtechNtpMIBCompliance | current | The compliance statement for agents which implement the NTP MIB. | |
| 1.3.6.1.4.1.27514.1.1.10.2.49.2.2 | NodeqtechNtpMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.49.2.2.1 | GroupqtechNtpSysGroup | current | The NTP system variables. |