QTECH-PIM-MIB
117 objects
This module defines qtech Pim mibs.
Imported Objects
| IF-MIB | InterfaceIndex |
| IPMROUTE-STD-MIB | ipMRouteGroup ipMRouteNextHopAddress ipMRouteNextHopGroup ipMRouteNextHopIfIndex ipMRouteNextHopSource ipMRouteNextHopSourceMask ipMRouteSource ipMRouteSourceMask |
| P-BRIDGE-MIB | EnabledStatus |
| QTECH-SMI | qtechMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.27 | IdentityqtechPimMIB | This module defines qtech Pim mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.27.1 | NodeqtechPimMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1 | NodeqtechPim | |||
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.1 | ScalarqtechPimJoinPruneInterval | read-write | current | The default interval at which periodic PIM-SM Join/Prune messages are to be sent. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2 | TableqtechPimInterfaceTable | not-accessible | current | The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1 | RowqtechPimInterfaceEntry | not-accessible | current | An entry (conceptual row) in the qtechPimInterfaceTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.1 | ColumnqtechPimInterfaceIfIndex | not-accessible | current | The ifIndex value of this PIM interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.2 | ColumnqtechPimInterfaceAddress | read-only | current | The IP address of the PIM interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.3 | ColumnqtechPimInterfaceNetMask | read-only | current | The network mask for the IP address of the PIM interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.4 | ColumnqtechPimInterfaceMode | read-write | current | The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.5 | ColumnqtechPimInterfaceDR | read-only | current | The Designated Router on this PIM interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.6 | ColumnqtechPimInterfaceHelloInterval | read-write | current | The frequency at which PIM Hello messages are transmitted on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.7 | ColumnqtechPimInterfaceJoinPruneInterval | read-write | current | The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.8 | ColumnqtechPimInterfaceCBSRPreference | read-write | current | The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate B… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.9 | ColumnqtechPimInterfaceTrigHelloInterval | read-write | current | The maximum time before a triggered PIM Hello message is transmitted on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.10 | ColumnqtechPimInterfaceHelloHoldtime | read-write | current | The value set in the Holdtime field of Hello messages transmitted on this interface. This should be 3.5 times the value of pimInterfaceHelloInterval. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.11 | ColumnqtechPimInterfaceLanPruneDelay | read-write | current | Turns the LAN Prune Delay Option off and on on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.12 | ColumnqtechPimInterfacePropagationDelay | read-write | current | The value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.13 | ColumnqtechPimInterfaceOverrideInterval | read-write | current | The value inserted into the Override Interval field of a LAN Prune Delay option on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.14 | ColumnqtechPimInterfaceGenerationID | read-write | current | Turns the Generation ID Option off and on on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.15 | ColumnqtechPimInterfaceJoinPruneHoldtime | read-write | current | The value inserted into the Holdtime field of a Join/ Prune message sent on this interface. The value should be 3.5 times pimInterfaceJoinPruneInterval. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.16 | ColumnqtechPimInterfaceGraftRetryInterval | read-write | current | The interval a PIM router waits for a Graft Ack before resending a Graft on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.17 | ColumnqtechPimInterfaceMaxGraftRetries | read-write | current | The maximum number of times this router will resend a Graft on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.18 | ColumnqtechPimInterfaceSRTTLThreshold | read-write | current | The Time To Live in a PIM-DM Refresh message at which it is not forwarded on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.19 | ColumnqtechPimInterfaceLanDelayEnabled | read-only | current | Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.20 | ColumnqtechPimInterfaceSRCapable | read-only | current | Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.21 | ColumnqtechPimInterfaceDRPriority | read-write | current | The Designater Router Priority inserted into the DR priority option on this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.22 | ColumnqtechPimInterfaceNbrCounter | read-only | current | The number of interface's neighbour. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.23 | ColumnqtechPimInterfaceBsrBorderEnabled | read-write | current | Enabled means Define a PIM bootstrap message boundary for the PIM domain,use disabled to remove the PIM border. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.24 | ColumnqtechPimInterfaceCountIn | read-only | current | Number of packets into the interface since the router has been up. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.25 | ColumnqtechPimInterfaceCountOut | read-only | current | Number of packets out of the interface since the router has been up. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.26 | ColumnqtechPimInterfaceEnabled | read-write | current | use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.27 | ColumnqtechPimNeighborFilterAcl | read-write | current | The name of the neighbor filter address list,which limits the scope of the neighbor,The default value means all neighbors will be allowed. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.2.1.28 | ColumnqtechPimDrSupportAddressBound | read-write | current | The name of the DR support address list,which limits the scope of the souce address ,this will be only used when the interface is DR, The default value means a… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3 | TableqtechPimNeighborTable | not-accessible | current | The (conceptual) table listing the router's PIM neighbors. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1 | RowqtechPimNeighborEntry | not-accessible | current | An entry (conceptual row) in the qtechPimNeighborTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.1 | ColumnqtechPimNeighborAddress | not-accessible | current | The IP address of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.2 | ColumnqtechPimNeighborIfIndex | read-only | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.3 | ColumnqtechPimNeighborUpTime | read-only | current | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.4 | ColumnqtechPimNeighborExpiryTime | read-only | current | The minimum time remaining before this PIM neighbor will be aged out. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.5 | ColumnqtechPimNeighborMode | read-only | deprecated | The active PIM mode of this neighbor. This object is deprecated for PIMv2 routers since all neighbors on the interface must be either dense or sparse as determ… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.6 | ColumnqtechPimNeighborLanPruneDelay | read-only | current | The value of LAN Prune Delay field of the LAN Prune Delay Option received from this neighbor. A value of 0 indicates that no LAN Prune Delay Option was receive… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.7 | ColumnqtechPimNeighborOverrideInterval | read-only | current | The value of Override Interval field of the LAN Prune Delay Option received from this neighbor. A value of 0 indicates that no LAN Prune Delay Option was recei… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.8 | ColumnqtechPimNeighborTBit | read-only | current | The value of the T bit field of the LAN Prune Delay Option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppres… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.9 | ColumnqtechPimNeighborSRCapable | read-only | current | Evaluates to TRUE if this neighbor is using the State Refresh Capable Option. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.3.1.10 | ColumnqtechPimNeighborDRPresent | read-only | current | Evaluates to TRUE if this neighbor is using the Designated Router Option. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4 | TableqtechPimIpMRouteTable | not-accessible | current | The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteTable defined in the IP Multicast MIB. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1 | RowqtechPimIpMRouteEntry | not-accessible | current | An entry (conceptual row) in the pimIpMRouteTable. There is one entry per entry in the ipMRouteTable whose incoming interface is running PIM. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.1 | ColumnqtechPimIpMRouteUpstreamAssertTimer | read-only | current | The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense … |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.2 | ColumnqtechPimIpMRouteAssertMetric | read-only | current | The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.3 | ColumnqtechPimIpMRouteAssertMetricPref | read-only | current | The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.4 | ColumnqtechPimIpMRouteAssertRPTBit | read-only | current | The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.5 | ColumnqtechPimIpMRouteFlags | read-only | current | This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.6 | ColumnqtechPimIpMRouteRPFNeighbor | read-only | current | The IP Address of the current RPF neighbor. If there is an upstream Assert Winner, it will be the RPF neighbor. Otherwise, the RPF neighbor will be the next ho… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.7 | ColumnqtechPimIpMRouteSourceTimer | read-only | current | The time before this router ceases originating State Refresh messages for this route. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.4.1.8 | ColumnqtechPimIpMRouteOriginatorSRTTL | read-only | current | The TTL used in State Refresh messages originated by this router for this route. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5 | TableqtechPimIpMRouteNextHopTable | not-accessible | current | The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteNextHopTable defined in the IP Multicast MIB. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1 | RowqtechPimIpMRouteNextHopEntry | not-accessible | current | An entry (conceptual row) in the pimIpMRouteNextHopTable. There is one entry per entry in the ipMRouteNextHopTable whose interface is running PIM and whose ipM… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.1 | ColumnqtechPimIpMRouteNextHopPruneReason | read-only | current | This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.2 | ColumnqtechPimIpMRouteNextHopAssertWinner | read-only | current | The IP Address of the Assert Winner. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.3 | ColumnqtechPimIpMRouteNextHopAssertTimer | read-only | current | The time remaining before the PIM router leaves the current Assert state. A value of 0 indicates that the router is in the No Info state. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.4 | ColumnqtechPimIpMRouteNextHopAssertMetric | read-only | current | The metric advertised by the Assert Winner. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.5 | ColumnqtechPimIpMRouteNextHopAssertMetricPref | read-only | current | The metric preference advertised by the Assert Winner. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.5.1.6 | ColumnqtechPimIpMRouteNextHopJoinPruneTimer | read-only | current | The time remaining before the PIM router reverts to default operation on this interface. PIM-SM will cease forwarding, PIM-DM will resume forwarding. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6 | TableqtechPimRPSetTable | not-accessible | current | The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this informatio… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1 | RowqtechPimRPSetEntry | not-accessible | current | An entry (conceptual row) in the pimRPSetTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.1 | ColumnqtechPimRPSetGroupAddress | not-accessible | current | The IP multicast group address which, when combined with pimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidat… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.2 | ColumnqtechPimRPSetGroupMask | not-accessible | current | The multicast group address mask which, when combined with pimRPSetGroupAddress, gives the group prefix for which this entry contains information about the Can… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.3 | ColumnqtechPimRPSetAddress | not-accessible | current | The IP address of the Candidate-RP. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.4 | ColumnqtechPimRPSetHoldTime | read-only | current | The holdtime of a Candidate-RP. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.5 | ColumnqtechPimRPSetExpiryTime | read-only | current | The minimum time remaining before the Candidate-RP will be declared down. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.6 | ColumnqtechPimRPSetComponent | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.6.1.7 | ColumnqtechPimRPSetUpTime | read-only | current | Length of time that this rp has been up. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7 | TableqtechPimComponentTable | not-accessible | current | The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1 | RowqtechPimComponentEntry | not-accessible | current | An entry (conceptual row) in the starPimComponentTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.1 | ColumnqtechPimComponentIndex | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only suppo… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.2 | ColumnqtechPimComponentBSRAddress | read-only | current | The IP address of the bootstrap router (BSR) for the local PIM region. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.3 | ColumnqtechPimComponentBSRExpiryTime | read-only | current | The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component send… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.4 | ColumnqtechPimComponentCRPHoldTime | read-create | current | The holdtime of the component when it is a candidate RP in the local domain. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.5 | ColumnqtechPimComponentBSRUptime | read-only | current | Length of time that this router has been up. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.6 | ColumnqtechPimComponentBSRPriority | read-only | current | The Priority of Bsr. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.7 | ColumnqtechPimComponentBSRHashMaskLength | read-only | current | Length of a mask (32 bits maximum) that is to be ANDed with the group address before the hash function is called. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.8 | ColumnqtechPimComponentBSRNextBsrMessage | read-only | current | Time (in hours, minutes, and seconds) in which the next bootstrap message is due from this BSR. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.7.1.9 | ColumnqtechPimComponentNextCandRPAdv | read-only | current | Time (in hours, minutes, and seconds) in which the next candidate RP advertisement will be sent. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.8 | ScalarqtechPimSourceLifetime | read-write | current | The maximum time this router will continue to originate State Refresh messages in the absence of traffic from the source itself. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.9 | ScalarqtechPimStateRefreshInterval | read-write | current | The interval between successive State Refresh messages originated by this router. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.10 | ScalarqtechPimStateRefreshLimitInterval | read-write | current | This router will not forward successive State Refresh messages received at less than this interval. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.11 | ScalarqtechPimStateRefreshTimeToLive | read-write | current | The TTL to be used by this router's originated State Refresh messages if the data packet's TTL is not recorded. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.12 | NodeqtechPimBsrCandidateGroup | |||
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.12.1 | ScalarqtechPimBsrCandidateIfindex | read-write | current | Interface type and number on this router from which the bootstrap router address is derived, to make it a candidate. This interface must be enabled with Protoc… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.12.2 | ScalarqtechPimBsrCandidateHashMaskLength | read-write | current | Length of a mask (32 bits maximum) that is to be ANDed with the group address before the hash function is called. All groups with the same seed hash (correspon… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.12.3 | ScalarqtechPimBsrCandidatePriority | read-write | current | The BSR with the larger priority is preferred. If the priority values are the same, the router with the larger IP address is the BSR.if qtechPimBsrCandidateIfi… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13 | TableqtechPimRPTable | not-accessible | current | The (conceptual) table listing PIM version 2 information for the Rendezvous Points (RPs) for IP multicast groups. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1 | RowqtechPimRPEntry | not-accessible | current | An entry (conceptual row) in the pimRPTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1.1 | ColumnqtechPimRPGroupAddress | not-accessible | current | The IP multicast group address which, when combined with pimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidat… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1.2 | ColumnqtechPimRPAddress | read-only | current | The IP address of the RP. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1.3 | ColumnqtechPimRPExpiryTime | read-only | current | The minimum time remaining before the RP will be declared down. If the local router is not the BSR, this value is 0. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.13.1.4 | ColumnqtechPimRPNextRPReachableIn | read-only | current | Indicates the time the next RP-reachable message will be sent. Time is expressed in hours:minutes:seconds. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14 | TableqtechPimStaticRPTable | not-accessible | current | The (conceptual) table listing PIM version 2 information for the Rendezvous Points (RPs) for IP multicast groups. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1 | RowqtechPimStaticRPEntry | not-accessible | current | An entry (conceptual row) in the pimStaticRPTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1.1 | ColumnqtechPimStaticRPAddress | not-accessible | current | The IP address of the RP. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1.2 | ColumnqtechPimStaticRPAddressIsOverride | read-create | current | Indicates that if there is a conflict, the RP configured with this command prevails over the RP learned by Bsr-RP. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1.3 | ColumnqtechPimStaticRPAclName | read-create | current | Name of an access list that defines for which multicast groups the RP should be used,the default value means all groups should be used. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.14.1.4 | ColumnqtechPimStaticRPStatus | read-create | current | The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15 | TableqtechPimRpCandidateTable | not-accessible | current | The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of pimComponentCRPHol… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15.1 | RowqtechPimRpCandidateEntry | not-accessible | current | An entry (conceptual row) in the pimRpCandidateTable. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15.1.1 | ColumnqtechPimRpCandidateIfindex | not-accessible | current | IP address associated with this interface type and number is advertised as a candidate RP address. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15.1.2 | ColumnqtechPimRpCandidateAclName | read-create | current | The name of Acl list,that defines the group prefixes that are advertised in association with the RP address,the default value means all groups will be advertis… |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.1.15.1.3 | ColumnqtechPimRpCandidateStatus | read-create | current | The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.2 | NodeqtechPimTraps | |||
| 1.3.6.1.4.1.27514.1.1.10.2.27.1.2.1 | NotificationqtechPimNeighborLoss | current | A pimNeighborLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no… | |
| 1.3.6.1.4.1.27514.1.1.10.2.27.2 | NodeqtechPimMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.27.2.1 | NodeqtechPimMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.27.2.1.1 | ComplianceqtechPimMIBCompliance | current | The compliance statement for entities which implement the Qtech Pim MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.27.2.2 | NodeqtechPimMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.27.2.2.1 | GroupqtechPimMIBGroup | current | A collection of objects providing pim management and opertion to a Qtech agent. | |
| 1.3.6.1.4.1.27514.1.1.10.2.27.2.2.2 | GroupqtechPimNotifyGroup | current | The collection of objects which are used to specify notifications for pim. |