QTECH-ROUTER-QOS-MIB
381 objects
This module defines qtech QoS(Quality of Service) mibs.
Imported Objects
| IF-MIB | InterfaceIndex |
| QTECH-SMI | qtechMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.106 | IdentityqtechRouterQoSMIB | This module defines qtech QoS(Quality of Service) mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.106.1 | NodeqtechCBQoSMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1 | NodeqtechCBQoSIfStaticsObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1 | TableqtechCBQoSIfCbwfqRunInfoTable | not-accessible | current | A table of interface CBWFQ Running statistics. When policy using queue behavior is applied on interface the interface will using Class Base Weighted Fair Queue… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1 | RowqtechCBQoSIfCbwfqRunInfoEntry | not-accessible | current | Interface CBWFQ statistics entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.1 | ColumnqtechCBQoSIfCbwfqPolicyIfIndex | read-only | current | The interface index |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.2 | ColumnqtechCBQoSIfCbwfqQueueSize | read-only | current | Queue size of CBWFQ |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.3 | ColumnqtechCBQoSIfCbwfqDiscard | read-only | current | The number of discarded packets which coundn't be enqueued. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.4 | ColumnqtechCBQoSIfCbwfqEfQueueSize | read-only | current | Queue size of EF |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.5 | ColumnqtechCBQoSIfCbwfqAfQueueSize | read-only | current | Queue size of AF |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.6 | ColumnqtechCBQoSIfCbwfqBeQueueSize | read-only | current | Queue size of BE |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.7 | ColumnqtechCBQoSIfCbwfqBeActiveQueueNum | read-only | current | the number of Active Be Queue |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.8 | ColumnqtechCBQoSIfCbwfqBeMaxActiveQueueNum | read-only | current | the max number of Active Be Queue |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.9 | ColumnqtechCBQoSIfCbwfqBeTotalQueueNum | read-only | current | the total number of Be Queue |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.1.1.10 | ColumnqtechCBQoSIfCbwfqAfAllocatedQueueNum | read-only | current | the Allocated number of Af Queue |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.2 | TableqtechCBQoSIfClassMatchRunInfoTable | not-accessible | current | A table of Running statistics for matching a classifier in a QoS policy applied on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.2.1 | RowqtechCBQoSIfClassMatchRunInfoEntry | not-accessible | current | Classifier's matching statistics information entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.2.1.1 | ColumnqtechCBQoSIfClassMatchIfIndex | read-only | current | the interface index |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.2.1.2 | ColumnqtechCBQoSIfClassMatchPolicyDirection | read-only | current | the direction of policy-map. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.2.1.3 | ColumnqtechCBQoSIfClassMatchClassIndex | read-only | current | class index in the policy-map. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.2.1.4 | ColumnqtechCBQoSIfClassMatchedPackets | read-only | current | Number of packets matching a class in a QoS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.2.1.5 | ColumnqtechCBQoSIfClassMatchedBytes | read-only | current | Number of bytes matching a class in a QoS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.2.1.6 | ColumnqtechCBQosIfClassPassedPackets | read-only | current | Number of passed packets matching a class in a QoS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.2.1.7 | ColumnqtechCBQosIfClassDroppedPackets | read-only | current | Number of dropped packets matching a class in a QoS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3 | TableqtechCBQoSIfCarRunInfoTable | not-accessible | current | A table of Running statistics for CAR in a QoS policy applied on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1 | RowqtechCBQoSIfCarRunInfoEntry | not-accessible | current | CAR statistics information entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1.1 | ColumnqtechCBQoSIfCarIfIndex | read-only | current | the interface index |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1.2 | ColumnqtechCBQoSIfCarPolicyDirection | read-only | current | the direction of policy-map. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1.3 | ColumnqtechCBQoSIfCarClassIndex | read-only | current | class index in the policy-map. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1.4 | ColumnqtechCBQoSIfCarConformedPackets | read-only | current | packets of conformed |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1.5 | ColumnqtechCBQoSIfCarConformedBytes | read-only | current | bytes of conformed |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1.6 | ColumnqtechCBQoSIfCarExceededPackets | read-only | current | packets of exceeded |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1.7 | ColumnqtechCBQoSIfCarExceededBytes | read-only | current | bytes of exceeded |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1.8 | ColumnqtechCBQoSIfCarViolatedPackets | read-only | current | packets of violated |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.3.1.9 | ColumnqtechCBQoSIfCarViolatedBytes | read-only | current | bytes of violated |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.4 | TableqtechCBQoSIfRemarkRunInfoTable | not-accessible | current | A table of Running statistics for remarking in a QoS policy applied on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.4.1 | RowqtechCBQoSIfRemarkRunInfoEntry | not-accessible | current | Remarking statistics entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.4.1.1 | ColumnqtechCBQoSIfRemarkIfIndex | read-only | current | the interface index |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.4.1.2 | ColumnqtechCBQoSIfRemarkPolicyDirection | read-only | current | the direction of policy-map. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.4.1.3 | ColumnqtechCBQoSIfRemarkClassIndex | read-only | current | class index in the policy-map. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.4.1.4 | ColumnqtechCBQoSIfRemarkedPackets | read-only | current | Number of packets remarked. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.4.1.5 | ColumnqtechCBQoSIfRemarkedBytes | read-only | current | Number of bytes remarked. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5 | TableqtechCBQoSIfQueueRunInfoTable | not-accessible | current | A table of Running statistics for queue in a QoS policy applied on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1 | RowqtechCBQoSIfQueueRunInfoEntry | not-accessible | current | Queue statistics entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1.1 | ColumnqtechCBQoSIfQueueIfIndex | read-only | current | the interface index |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1.2 | ColumnqtechCBQoSIfQueuePolicyDirection | read-only | current | the direction of policy-map. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1.3 | ColumnqtechCBQoSIfQueueClassIndex | read-only | current | class index in the policy-map. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1.4 | ColumnqtechCBQoSIfQueueMatchedPackets | read-only | current | Number of packets matched to enqueue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1.5 | ColumnqtechCBQoSIfQueueMatchedBytes | read-only | current | Number of bytes matched to enqueue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1.6 | ColumnqtechCBQoSIfQueueEnqueuedPackets | read-only | current | Number of packets enqueued. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1.7 | ColumnqtechCBQoSIfQueueEnqueuedBytes | read-only | current | Number of bytes enqueued. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1.8 | ColumnqtechCBQoSIfQueueDiscardedPackets | read-only | current | Number of packets discarded when enqueued by discard method. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.5.1.9 | ColumnqtechCBQoSIfQueueDiscardedBytes | read-only | current | Number of bytes discarded when enqueued by discard method. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.6 | TableqtechCBQoSIfWredRunInfoTable | not-accessible | current | A table of Running statistics for WRED in a QoS policy applied on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.6.1 | RowqtechCBQoSIfWredRunInfoEntry | not-accessible | current | WRED statistics entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.6.1.1 | ColumnqtechCBQoSIfWredIfIndex | read-only | current | the interface index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.6.1.2 | ColumnqtechCBQoSIfWredClassIndex | read-only | current | the direction of policy-map. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.6.1.3 | ColumnqtechCBQoSIfWredClassValue | read-only | current | dscp/prec value. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.6.1.4 | ColumnqtechCBQoSIfWredRandomDiscardedPackets | read-only | current | Number of packets that random-discarded by WRED. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.1.1.6.1.5 | ColumnqtechCBQoSIfWredTailDiscardedPackets | read-only | current | Number of packets that tail-discarded by WRED. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2 | NodeqtechIfQoSMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1 | TableqtechIfQosPQRunInfoTable | not-accessible | current | PQ(Priority Queuing) table PQ is a kind of queuing strategy applied on interface for congestion management. PQ provides a mechanism to prioritize packets sent … |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1 | RowqtechIfQosPQRunInfoEntry | not-accessible | current | PQ configuration and running infomation |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.1 | ColumnqtechIfQosPQIfIndex | read-only | current | The index of table, which is the index of interface applying Priority Queuing strategy. The interface identified by the value of this index is the same interfa… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.2 | ColumnqtechIfQosPQListNum | read-only | current | The number of PQL applied to an interface identified by the value of qosPQIfIndex. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.3 | ColumnqtechIfQosPQIfName | read-only | current | The description of the interface by the value of qosPQIfIndex. It's a textual string containing information about the interface type and the interface number. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.4 | ColumnqtechIfQosPQHighPkt | read-only | current | The count of packets enqueued the high priority queue when congestion occoured in the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.5 | ColumnqtechIfQosPQHighDiscard | read-only | current | The count of discarded packets which can't be enqueued high priority queue because the high priority queue is full. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.6 | ColumnqtechIfQosPQHighMaxQueLen | read-only | current | The maximum length of high priority queue. The default value of maximum queue length is 20. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.7 | ColumnqtechIfQosPQMiddlePkt | read-only | current | The count of packets enqueued the middle priority queue when congestion occoured in the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.8 | ColumnqtechIfQosPQMiddleDiscard | read-only | current | The count of discarded packets which can't be enqueued middle priority queue because the middle priority queue is full. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.9 | ColumnqtechIfQosPQMiddleMaxQueLen | read-only | current | The maximum length of middle priority queue. The default value of maximum queue length is 40. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.10 | ColumnqtechIfQosPQNormalPkt | read-only | current | The count of packets enqueued the normal priority queue when congestion occoured in the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.11 | ColumnqtechIfQosPQNormalDiscard | read-only | current | The count of discarded packets which can't be enqueued normal priority queue because the normal priority queue is full. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.12 | ColumnqtechIfQosPQNormalMaxQueLen | read-only | current | The maximum length of normal priority queue. The default value of maximum queue length is 60. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.13 | ColumnqtechIfQosPQLowPkt | read-only | current | The count of packets enqueued the bottom priority queue when congestion occoured in the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.14 | ColumnqtechIfQosPQLowDiscard | read-only | current | The count of discarded packets which can't be enqueued low priority queue because the low priority queue is full. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.1.1.15 | ColumnqtechIfQosPQLowMaxQueLen | read-only | current | The maximum length of low priority queue. The default value of maximum queue length is 80. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.2 | TableqtechIfQosCQRunInfoTable | not-accessible | current | CQ(Custom Queuing) statistics table This table is about the running infomation of CQ applied on interface for congestion management. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.2.1 | RowqtechIfQosCQRunInfoEntry | not-accessible | current | CQ running infomation |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.2.1.1 | ColumnqtechIfQosCQRunInfoIfIndex | read-only | current | The index of the table, which is the index of interface applying Custom Queuing strategy. The interface identified by the value of this index is the same inter… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.2.1.2 | ColumnqtechIfQosCQRunInfoQueNum | read-only | current | The index of the table, which is the custom queue number |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.2.1.3 | ColumnqtechIfQosCQRunInfoIfName | read-only | current | The description of the interface by the value of qosCQRunInfoIfIndex. It's a textual string containing information about the interface type and the interface n… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.2.1.4 | ColumnqtechIfQosCQRunInfoQuePkt | read-only | current | The count of packets enqueued the spceified custom queue when congestion occoured in the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.2.1.5 | ColumnqtechIfQosCQRunInfoQueDiscard | read-only | current | The count of discarded packets which can't be enqueued the specified custom queue because the custom queue is full. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.2.1.6 | ColumnqtechIfQosCQRunInfoMaxQueLen | read-only | current | The maximum length of the specified queue. The default value of maximum queue length is 20. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3 | TableqtechIfQosWFQRunInfoTable | not-accessible | current | WFQ(Weighted Fair Queuing) table WFQ is a kind of queuing strategy applied on interface for congestion management. With WFQ, packets are classified by flow. Fo… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3.1 | RowqtechIfQosWFQRunInfoEntry | not-accessible | current | WFQ configuration and running infomation |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3.1.1 | ColumnqtechIfQosWFQIfIndex | read-only | current | The index of the table, which is the index of interface applying Weighted Fair Queuing strategy. The interface identified by the value of this index is the sam… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3.1.2 | ColumnqtechIfQosWFQIfName | read-only | current | The description of the interface by the value of qosWFQIfIndex. It's a textual string containing information about the interface type and the interface number. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3.1.3 | ColumnqtechIfQosWFQMaxQueLen | read-only | current | The maximum length of the queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3.1.4 | ColumnqtechIfQosWFQTotalQueNum | read-only | current | The total number of queues. The default value is a256(256). |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3.1.5 | ColumnqtechIfQosWFQCurQueLen | read-only | current | The count of packets enqueued all the queues when congestion occoured in the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3.1.6 | ColumnqtechIfQosWFQTotalDiscard | read-only | current | The count of discarded packets which can't be enqueued all the queues because the queue is full. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3.1.7 | ColumnqtechIfQosWFQActiveQueNum | read-only | current | A queue becomes active when the queue is not empty. The count of current active queues when WFQ was enabled in the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.3.1.8 | ColumnqtechIfQosWFQMaxActiveQueNum | read-only | current | The maximum count of active queues. It is the count of active queues that have occurred since WFQ was enabled in the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.4 | TableqtechIfQosWredRunInfoTable | not-accessible | current | A table of Running statistics for WRED in the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.4.1 | RowqtechIfQosWredRunInfoEntry | not-accessible | current | WRED statistics entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.4.1.1 | ColumnqtechIfQosWredIfIndex | read-only | current | The index of the table, which is the index of interface applying WRED. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.4.1.2 | ColumnqtechIfQosWredValue | read-only | current | the dscp/prec value. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.4.1.3 | ColumnqtechIfQosWredRandomDiscardedPackets | read-only | current | Number of packets that random-discarded by WRED. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.4.1.4 | ColumnqtechIfQosWredTailDiscardedPackets | read-only | current | Number of packets that tail-discarded by WRED. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5 | TableqtechIfQosCARTable | not-accessible | current | CAR(Committed Access Rate) table |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1 | RowqtechIfQosCAREntry | not-accessible | current | CAR configuration and running infomation. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.1 | ColumnqtechIfQosCARIfIndex | read-only | current | One of the index of the CAR table. This is the index of the interface on which CAR policy applied. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.2 | ColumnqtechIfQosCARIfName | read-only | current | The description of the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.3 | ColumnqtechIfQosCARPktDirection | read-only | current | One of the index of the CAR table. This is the direction of traffic. There are two directions: input(1) and output(2). |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.4 | ColumnqtechIfQosCARType | read-only | current | This is the matching type for the traffic. The value acl(1) means that the traffic matching the configured ACL is applicable to the CAR policy. The value dscp(… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.5 | ColumnqtechIfQosCARListNum | read-only | current | This is the ACL number, DSCP number or QOS-GROUP number. When CARType=1,this number is ACL number; When CARType=2,this number is DSCP number; When CARType=3,th… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.6 | ColumnqtechIfQosCARindex | read-only | current | One of the index of the CAR table. This is the index of the configured CAR policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.7 | ColumnqtechIfQosCARCIR | read-only | current | The Committed Information Rate. Unit: bps. This is the target rate which the CAR policy limits. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.8 | ColumnqtechIfQosCARBurstSize | read-only | current | Burst traffic size. Unit: bit. This is the amount of traffic in excess of the committed information rate that will be permitted by the CAR policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.9 | ColumnqtechIfQosCARExcessBurstSize | read-only | current | Excess Burst Size. Unit: bit. This is the amount of traffic in excess of the burst size, which may be conditionally permitted by the CAR policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.10 | ColumnqtechIfQosCARConformAction | read-only | current | Action to be taken by the traffic, when the traffic conforms CIR. There are the following actions: Continue(1) CAR policy which applied on the interface. drop(… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.11 | ColumnqtechIfQosCARExceedAction | read-only | current | Action to be taken by the traffic, when the traffic is exceeds the CIR. There are the following actions: Continue(1) CAR policy which applied on the interface.… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.12 | ColumnqtechIfQosCARConformNewPrec | read-only | current | Rewrite the precedence value on packets when traffic is within the CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.13 | ColumnqtechIfQosCARExceedNewPrec | read-only | current | Rewrite the precedence value on packets when traffic is out of CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.14 | ColumnqtechIfQosCARConformPkt | read-only | current | The number of packets which conformed CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.15 | ColumnqtechIfQosCARConformByte | read-only | current | The bytes of packets which conformed CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.16 | ColumnqtechIfQosCARExceedPkt | read-only | current | The number of packets which exceeded CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.5.1.17 | ColumnqtechIfQosCARExceedByte | read-only | current | the bytes of packets which exceeded CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6 | TableqtechIfQosGTSTable | not-accessible | current | GTS(Generic Traffic Shaping) table |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1 | RowqtechIfQosGTSEntry | not-accessible | current | GTS configuration and running information |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.1 | ColumnqtechIfQosGTSIfIndex | read-only | current | One of the index of the GTS table. This is the index of the interface on which GTS policy applied. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.2 | ColumnqtechIfQosGTSIfName | read-only | current | The description of the interface on which GTS policy applied. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.3 | ColumnqtechIfQosGTSType | read-only | current | One of the index of the GTS table. This is the matching type for the traffic. The value acl(1) means that the traffic matching the configured ACL is applicable… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.4 | ColumnqtechIfQosGTSACLNum | read-only | current | One of the index of the GTS table. This is the ACL number for the shaping traffic to match. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.5 | ColumnqtechIfQosGTSCIR | read-only | current | The Committed Information Rate. This is the target sustained rate which the GTS policy will shape. Unit: bps. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.6 | ColumnqtechIfQosGTSBurstSize | read-only | current | Burst traffic size. Unit: bit. This is the amount of traffic in excess of the committed information rate that will be permitted by the GTS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.7 | ColumnqtechIfQosGTSExcessBurstSize | read-only | current | Excess Burst Size. Unit: bit. This is the amount of traffic in excess of the burst size, which may be conditionally permitted by the GTS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.8 | ColumnqtechIfQosGTSMaxQueLen | read-only | current | The maximum queue length for the GTS buffer. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.9 | ColumnqtechIfQosGTSCurQueLen | read-only | current | The current queue length for the GTS buffer, i.e. the number of packets queuing in the GTS buffer. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.10 | ColumnqtechIfQosGTSPassPkt | read-only | current | The number of packets which passed by the GTS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.11 | ColumnqtechIfQosGTSPassByte | read-only | current | The bytes of packets which passed by the GTS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.12 | ColumnqtechIfQosGTSDiscardPkt | read-only | current | The number of packets which discarded by the GTS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.6.1.13 | ColumnqtechIfQosGTSDiscardByte | read-only | current | The bytes of packets which discarded by the GTS policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.7 | TableqtechIfQosRTPIfQueueRunInfoTable | not-accessible | current | A table of Running statistics for RTP(Realtime Transport Protocol) Queue applied on the interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.7.1 | RowqtechIfQosRTPIfQueueRunInfoEntry | not-accessible | current | RTP(Realtime Transport Protocol) Queue statistics entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.7.1.1 | ColumnqtechIfQosRTPIfApplyIfIndex | read-only | current | the inteface index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.7.1.2 | ColumnqtechIfQosRTPIfQueueSize | read-only | current | Size of Rtpq Queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.7.1.3 | ColumnqtechIfQosRTPIfQueueMaxSize | read-only | current | Max packet number of RTP(Realtime Transport Protocol) Queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.7.1.4 | ColumnqtechIfQosRTPIfQueueOutputs | read-only | current | Output packet number of RTP(Realtime Transport Protocol) Queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.7.1.5 | ColumnqtechIfQosRTPIfQueueDiscards | read-only | current | Discarded packet number of RTP(Realtime Transport Protocol) Queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8 | TableqtechIfQosFlowLimitRunInfoTable | not-accessible | current | A table of Running statistics for Flow-Limit. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1 | RowqtechIfQosFlowLimitRunInfoEntry | not-accessible | current | Flow limit statistics entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.1 | ColumnqtechIfQosFlowLimitLabelNum | read-only | current | This is the label number of flow limit. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.2 | ColumnqtechIfQosFlowLimitPktDirection | read-only | current | One of the index of the flow limit table. This is the direction of traffic. There are two directions: input(1) and output(2) |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.3 | ColumnqtechIfQosFlowLimitCIR | read-only | current | The Committed Information Rate. Unit: bps. This is the target rate which the flow limit policy limits. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.4 | ColumnqtechIfQosFlowLimitBurstSize | read-only | current | Burst traffic size. Unit: bit. This is the amount of traffic in excess of the committed information rate that will be permitted by the flow limit policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.5 | ColumnqtechIfQosFlowLimitExcessBurstSize | read-only | current | Excess Burst Size. Unit: bit. This is the amount of traffic in excess of the burst size, which may be conditionally permitted by the flow limit policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.6 | ColumnqtechIfQosFlowLimitConformAction | read-only | current | Action to be taken by the traffic, when the traffic conforms CIR. There are the following actions: Continue(1) CAR policy which applied on the interface. drop(… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.7 | ColumnqtechIfQosFlowLimitExceedAction | read-only | current | Action to be taken by the traffic, when the traffic is exceeds the CIR. There are the following actions: Continue(1) CAR policy which applied on the interface.… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.8 | ColumnqtechIfQosFlowLimitConformNewPrec | read-only | current | Rewrite the precedence value on packets when traffic is within the CIR |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.9 | ColumnqtechIfQosFlowLimitExceedNewPrec | read-only | current | Rewrite the precedence value on packets when traffic is out of CIR |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.10 | ColumnqtechIfQosFlowLimitConformPkt | read-only | current | The number of packets which conformed CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.11 | ColumnqtechIfQosFlowLimitConformByte | read-only | current | The bytes of packets which conformed CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.12 | ColumnqtechIfQosFlowLimitExceedPkt | read-only | current | The number of packets which exceeded CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.2.8.1.13 | ColumnqtechIfQosFlowLimitExceedByte | read-only | current | the bytes of packets which exceeded CIR. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3 | NodeqtechHQoSMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.1 | NodeqtechHQoSScalarObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.1.1 | ScalarqtechHQoSNameType | read-write | current | Name type of qtechHQoSNameFind, used to get index of correspond entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.1.2 | ScalarqtechHQoSNameFind | read-write | current | Name of entry to find. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.1.3 | ScalarqtechHQoSNameIndex | read-only | current | Corresponding entry index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2 | NodeqtechHQoSUserQObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.1 | ScalarqtechHQoSUserQInIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSUserQIndex when creating entries in the qtechHQoSUserQTable with in direction. The value 0 in… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.2 | ScalarqtechHQoSUserQOutIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSUserQIndex when creating entries in the qtechHQoSUserQTable with out direction. The value 0 i… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3 | TableqtechHQoSUserQTable | not-accessible | current | User queue Table. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1 | RowqtechHQoSUserQEntry | not-accessible | current | A row in this table represents the user queue information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.1 | ColumnqtechHQoSUserQIndex | not-accessible | current | User queue table index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.2 | ColumnqtechHQoSUserQName | read-create | current | User queue name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.3 | ColumnqtechHQoSUserQDirection | read-create | current | Direction of the user queue. There are two directions: inbound(1) and outbound(2). |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.4 | ColumnqtechHQoSUserQRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, qtechHQoSUserQName, qtec… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.5 | ColumnqtechHQoSUserQFlowQName | read-create | current | The name of flow queue binding with this user queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.6 | ColumnqtechHQoSUserQFlowQIndex | read-only | current | Flow queue index binding with this user queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.7 | ColumnqtechHQoSUserQGroupName | read-create | current | The name of user group queue binding with this user queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.8 | ColumnqtechHQoSUserQGroupIndex | read-only | current | User group index binding with this user. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.9 | ColumnqtechHQoSUserQFlowMapName | read-create | current | The name of flow-mapping binding with this user queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.10 | ColumnqtechHQoSUserQFlowMapIndex | read-only | current | Flow-mapping index binding with this user queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.11 | ColumnqtechHQoSUserQCIR | read-create | current | Commit rate of this user queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.2.3.1.12 | ColumnqtechHQoSUserQPIR | read-create | current | Peak rate of this user queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3 | NodeqtechHQoSUserGroupQObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3.1 | ScalarqtechHQoSUserGroupQInIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSUserGroupQIndex when creating entries in the qtechHQoSUserGroupQTable with in direction. The … |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3.2 | ScalarqtechHQoSUserGroupQOutIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSUserGroupQIndex when creating entries in the qtechHQoSUserGroupQTable with out direction. The… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3.3 | TableqtechHQoSUserGroupQTable | not-accessible | current | User group queue table, a user-group contains a set of users. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3.3.1 | RowqtechHQoSUserGroupQEntry | not-accessible | current | A row in this table represents the user group queue information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3.3.1.1 | ColumnqtechHQoSUserGroupQIndex | not-accessible | current | User group table index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3.3.1.2 | ColumnqtechHQoSUserGroupQName | read-create | current | User group queue name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3.3.1.3 | ColumnqtechHQoSUserGroupQDirection | read-create | current | Direction of user group queue. There are two directions: inbound(1) and outbound(2). |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3.3.1.4 | ColumnqtechHQoSUserGroupQRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, qtechHQoSUserGroupQName,… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.3.3.1.5 | ColumnqtechHQoSUserGroupQShaping | read-create | current | User group queue total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4 | NodeqtechHQoSFlowQObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.1 | ScalarqtechHQoSFlowQIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSFlowQIndex when creating entries in the qtechHQoSFlowQTable. The value 0 indicates that no un… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2 | TableqtechHQoSFlowQTable | not-accessible | current | Flow queue table. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1 | RowqtechHQoSFlowQEntry | not-accessible | current | A row in this table represents the flow queue information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.1 | ColumnqtechHQoSFlowQIndex | not-accessible | current | Index of flow queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.2 | ColumnqtechHQoSFlowQName | read-create | current | Flow queue name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.3 | ColumnqtechHQoSFlowQRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, qtechHQoSFlowQName objec… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.4 | ColumnqtechHQoSFlowQBEQType | read-create | current | Flow queue BEQ type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.5 | ColumnqtechHQoSFlowQBEQWredWeight | read-create | current | Flow queue BE to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.6 | ColumnqtechHQoSFlowQBEQWredName | read-create | current | Flow queue BE to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.7 | ColumnqtechHQoSFlowQBEQDepth | read-create | current | Flow queue BE to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.8 | ColumnqtechHQoSFlowQBEQShaping | read-create | current | Flow queue BE total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.9 | ColumnqtechHQoSFlowQAF1QType | read-create | current | Flow queue AF1Q type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.10 | ColumnqtechHQoSFlowQAF1QWredWeight | read-create | current | Flow queue AF1 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.11 | ColumnqtechHQoSFlowQAF1QWredName | read-create | current | Flow queue AF1 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.12 | ColumnqtechHQoSFlowQAF1QDepth | read-create | current | Flow queue AF1 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.13 | ColumnqtechHQoSFlowQAF1QShaping | read-create | current | Flow queue AF1 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.14 | ColumnqtechHQoSFlowQAF2QType | read-create | current | Flow queue AF2 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.15 | ColumnqtechHQoSFlowQAF2QWredWeight | read-create | current | Flow queue AF2 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.16 | ColumnqtechHQoSFlowQAF2QWredName | read-create | current | Flow queue AF2 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.17 | ColumnqtechHQoSFlowQAF2QDepth | read-create | current | Flow queue AF2 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.18 | ColumnqtechHQoSFlowQAF2QShaping | read-create | current | Flow queue AF2 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.19 | ColumnqtechHQoSFlowQAF3QType | read-create | current | Flow queue AF3 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.20 | ColumnqtechHQoSFlowQAF3QWredWeight | read-create | current | Flow queue AF3 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.21 | ColumnqtechHQoSFlowQAF3QWredName | read-create | current | Flow queue AF3 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.22 | ColumnqtechHQoSFlowQAF3QDepth | read-create | current | Flow queue AF3 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.23 | ColumnqtechHQoSFlowQAF3QShaping | read-create | current | Flow queue AF3 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.24 | ColumnqtechHQoSFlowQAF4QType | read-create | current | Flow queue AF4 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.25 | ColumnqtechHQoSFlowQAF4QWredWeight | read-create | current | Flow queue AF4 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.26 | ColumnqtechHQoSFlowQAF4QWredName | read-create | current | Flow queue AF4 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.27 | ColumnqtechHQoSFlowQAF4QDepth | read-create | current | Flow queue AF4 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.28 | ColumnqtechHQoSFlowQAF4QShaping | read-create | current | Flow queue AF4 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.29 | ColumnqtechHQoSFlowQEFQType | read-create | current | Flow queue EF type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.30 | ColumnqtechHQoSFlowQEFQWredWeight | read-create | current | Flow queue EF to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.31 | ColumnqtechHQoSFlowQEFQWredName | read-create | current | Flow queue EF to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.32 | ColumnqtechHQoSFlowQEFQDepth | read-create | current | Flow queue EF to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.33 | ColumnqtechHQoSFlowQEFQShaping | read-create | current | Flow queue EF total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.34 | ColumnqtechHQoSFlowQCS6QType | read-create | current | Flow queue CS6 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.35 | ColumnqtechHQoSFlowQCS6QWredWeight | read-create | current | Flow queue CS6 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.36 | ColumnqtechHQoSFlowQCS6QWredName | read-create | current | Flow queue CS6 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.37 | ColumnqtechHQoSFlowQCS6QDepth | read-create | current | Flow queue CS6 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.38 | ColumnqtechHQoSFlowQCS6QShaping | read-create | current | Flow queue CS6 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.39 | ColumnqtechHQoSFlowQCS7QType | read-create | current | Flow queue CS7 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.40 | ColumnqtechHQoSFlowQCS7QWredWeight | read-create | current | Flow queue CS7 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.41 | ColumnqtechHQoSFlowQCS7QWredName | read-create | current | Flow queue CS7 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.42 | ColumnqtechHQoSFlowQCS7QDepth | read-create | current | Flow queue CS7 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.4.2.1.43 | ColumnqtechHQoSFlowQCS7QShaping | read-create | current | Flow queue CS7 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5 | NodeqtechHQoSFlowMapObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.1 | ScalarqtechHQoSFlowMapIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSFlowMapIndex when creating entries in the qtechHQoSFlowMapTable. The value 0 indicates that n… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2 | TableqtechHQoSFlowMapTable | not-accessible | current | Flow map table. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1 | RowqtechHQoSFlowMapEntry | not-accessible | current | A row in this table represents the flow map information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.1 | ColumnqtechHQoSFlowMapIndex | not-accessible | current | Index of flow map entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.2 | ColumnqtechHQoSFlowMapName | read-create | current | Flow map entry name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.3 | ColumnqtechHQoSFlowMapRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, qtechHQoSFlowMapName obj… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.4 | ColumnqtechHQoSFlowMapBEQ2PortQ | read-create | current | BE to port queue type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.5 | ColumnqtechHQoSFlowMapAF1Q2PortQ | read-create | current | AF1 to port queue type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.6 | ColumnqtechHQoSFlowMapAF2Q2PortQ | read-create | current | AF2 to port queue type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.7 | ColumnqtechHQoSFlowMapAF3Q2PortQ | read-create | current | AF3 to port queue type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.8 | ColumnqtechHQoSFlowMapAF4Q2PortQ | read-create | current | AF4 to port queue type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.9 | ColumnqtechHQoSFlowMapEFQ2PortQ | read-create | current | EF to port queue type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.10 | ColumnqtechHQoSFlowMapCS6Q2PortQ | read-create | current | CS6 to port queue type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.5.2.1.11 | ColumnqtechHQoSFlowMapCS7Q2PortQ | read-create | current | CS7 to port queue type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6 | NodeqtechHQoSTClassifierObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.1 | ScalarqtechHQoSTClassifierIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSTClassifierIndex when creating entries in the qtechHQoSTClassifierTable. The value 0 indicate… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2 | TableqtechHQoSTClassifierTable | not-accessible | current | Traffic classfier table. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1 | RowqtechHQoSTClassifierEntry | not-accessible | current | A row in this table represents the traffic classfier information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.1 | ColumnqtechHQoSTClassifierIndex | not-accessible | current | Index of traffic classifier entry. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.2 | ColumnqtechHQoSTClassifierInstance | not-accessible | current | Sub index of traffic classifier entry. It is used for matching more conditions, such as acl, dscp. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.3 | ColumnqtechHQoSTClassifierName | read-create | current | Traffic classifier name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.4 | ColumnqtechHQoSTClassifierType | read-create | current | Traffic classifier matching type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.5 | ColumnqtechHQoSTClassifierRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, qtechHQoSTClassifierName… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.6 | ColumnqtechHQoSTClassifierMatchMask | read-create | current | This bit map indicates which of the fields described next, If a particular bit is set to zero then the corresponding field in the packet MUST be ignored for co… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.7 | ColumnqtechHQoSTClassifierMatchV4Any | read-create | current | Traffic classifier matching any ipv4 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.8 | ColumnqtechHQoSTClassifierMatchV4AclID | read-create | current | Traffic classifier matching acl id. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.9 | ColumnqtechHQoSTClassifierV4AclName | read-create | current | Traffic classifier matching acl name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.10 | ColumnqtechHQoSTClassifierMatchV4Dscp | read-create | current | Traffic classifier matching ipv4 dscp. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.11 | ColumnqtechHQoSTClassifierMatchV4Tos | read-create | current | Traffic classifier matching ipv4 precedence. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.12 | ColumnqtechHQoSTClassifierMatchV6Any | read-create | current | Traffic classifier matching any ipv6 packet. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.13 | ColumnqtechHQoSTClassifierMatchV6AclID | read-create | current | Traffic classifier matching ipv6 acl id. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.14 | ColumnqtechHQoSTClassifierV6AclName | read-create | current | Traffic classifier matching ipv6 acl name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.15 | ColumnqtechHQoSTClassifierMatchV6Dscp | read-create | current | Traffic classifier matching ipv6 dscp. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.16 | ColumnqtechHQoSTClassifierMatchCos | read-create | current | Traffic classifier matching Ethernet vlan cos. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.17 | ColumnqtechHQoSTClassifierMatchExp | read-create | current | Traffic classifier matching mpls label exp. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.18 | ColumnqtechHQoSTClassifierMatchSrcMac | read-create | current | Traffic classifier matching source mac. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.6.2.1.19 | ColumnqtechHQoSTClassifierMatchDstMac | read-create | current | Traffic classifier matching destination mac. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7 | NodeqtechHQoSTBehaviorObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.1 | ScalarqtechHQoSTBehaviorIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSTBehaviorIndex when creating entries in the qtechHQoSTBehaviorTable. The value 0 indicates th… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2 | TableqtechHQoSTBehaviorTable | not-accessible | current | Traffic behavior table. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1 | RowqtechHQoSTBehaviorEntry | not-accessible | current | A row in this table represents the traffic behavior information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.1 | ColumnqtechHQoSTBehaviorIndex | not-accessible | current | Traffic behavior table index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.2 | ColumnqtechHQoSTBehaviorName | read-create | current | Traffic behavior table name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.3 | ColumnqtechHQoSTBehaviorRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, qtechHQoSTBehaviorName o… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.4 | ColumnqtechHQoSTBehaviorMask | read-create | current | This bit map indicates which of the fields described next, If a particular bit is set to zero then the corresponding field in the packet MUST be ignored for co… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.5 | ColumnqtechHQoSTBehaviorUserQName | read-create | current | User queue belong to this traffic behavior. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.6 | ColumnqtechHQoSTBehaviorTCos | read-create | current | Set service-class. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.7 | ColumnqtechHQoSTBehaviorTColor | read-create | current | Set color. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.8 | ColumnqtechHQoSTBehaviorRV4Dscp | read-create | current | Remark traffic ipv4 dscp |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.9 | ColumnqtechHQoSTBehaviorRV4Tos | read-create | current | Remark traffic ipv4 precedence |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.10 | ColumnqtechHQoSTBehaviorRV6Dscp | read-create | current | Remark traffic ipv6 dscp. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.11 | ColumnqtechHQoSTBehaviorRVlanCos | read-create | current | Remark traffic ethernet vlan cos. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.12 | ColumnqtechHQoSTBehaviorRExp | read-create | current | Remark traffic mpls label exp. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.7.2.1.13 | ColumnqtechHQoSTBehaviorSubPolicyName | read-create | current | Sub traffic policy under this traffic behavior. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8 | NodeqtechHQoSTPolicyObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.1 | ScalarqtechHQoSTPolicyIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSTPolicyIndex when creating entries in the qtechHQoSTPolicyTable. The value 0 indicates that n… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.2 | TableqtechHQoSTPolicyTable | not-accessible | current | Traffic policy table. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.2.1 | RowqtechHQoSTPolicyEntry | not-accessible | current | A row in this table represents the traffic policy information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.2.1.1 | ColumnqtechHQoSTPolicyIndex | not-accessible | current | Traffic policy entry index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.2.1.2 | ColumnqtechHQoSTPolicyName | read-create | current | Traffic policy entry name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.2.1.3 | ColumnqtechHQoSTPolicyRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, qtechHQoSTPolicyName obj… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.3 | ScalarqtechHQoSTPolicyMapIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSTPolicyMapIndex when creating entries in the qtechHQoSTPolicyMapTable. The value 0 indicates … |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4 | TableqtechHQoSTPolicyMapTable | not-accessible | current | Traffic policy map table. Contains policy,classfier,behavior. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1 | RowqtechHQoSTPolicyMapEntry | not-accessible | current | A row in this table represents the traffic policy map information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1.1 | ColumnqtechHQoSTPolicyMapIndex | not-accessible | current | Traffic policy map entry index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1.2 | ColumnqtechHQoSTPolicyMapPolicyName | read-create | current | Traffic policy entry name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1.3 | ColumnqtechHQoSTPolicyMapPolicyIndex | read-create | current | Traffic policy entry index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1.4 | ColumnqtechHQoSTPolicyMapTClassfierName | read-create | current | Traffic classifier entry name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1.5 | ColumnqtechHQoSTPolicyMapTClassfierIndex | read-create | current | Traffic classifier entry index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1.6 | ColumnqtechHQoSTPolicyMapTBehaviorName | read-create | current | Traffic behavior entry name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1.7 | ColumnqtechHQoSTPolicyMapTBehaviorIndex | read-create | current | Traffic behavior entry index. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1.8 | ColumnqtechHQoSTPolicyMapPrecedence | read-create | current | Precedence of traffic Policy. Set by user. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.8.4.1.9 | ColumnqtechHQoSTPolicyMapRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, qtechHQoSTPolicyMapPolic… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.9 | NodeqtechHQoSVoQObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.9.1 | ScalarqtechHQoSVoQEnable | read-write | current | Config VoQ of device. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.9.2 | TableqtechHQoSVoQDeviceTable | not-accessible | current | Device credite table. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.9.2.1 | RowqtechHQoSVoQDeviceEntry | not-accessible | current | A row in this table represents the device credite information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.9.2.1.1 | ColumnqtechHQoSVoQDeviceId | not-accessible | current | Device ID, devid=slot*3+subslot. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.9.2.1.2 | ColumnqtechHQoSVoQDeviceCredit | read-write | current | Credite of this device. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10 | NodeqtechHQoSPortQObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.1 | ScalarqtechHQoSPortQIndexNext | read-only | current | This object contains an appropriate value to be used for qtechHQoSPortQIndex when creating entries in the qtechHQoSPortQTable. The value 0 indicates that no un… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2 | TableqtechHQoSPortQTable | not-accessible | current | Port queue table. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1 | RowqtechHQoSPortQEntry | not-accessible | current | A row in this table represents the port queue information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.1 | ColumnqtechHQoSPortQIndex | not-accessible | current | Index of port queue. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.2 | ColumnqtechHQoSPortQName | read-create | current | Port queue name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.3 | ColumnqtechHQoSPortQRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, qtechHQoSPortQName objec… |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.4 | ColumnqtechHQoSPortQBEQType | read-create | current | Port queue BEQ type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.5 | ColumnqtechHQoSPortQBEQWredWeight | read-create | current | Port queue BEQ to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.6 | ColumnqtechHQoSPortQBEQWredName | read-create | current | Port queue BEQ to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.7 | ColumnqtechHQoSPortQBEQDepth | read-create | current | Port queue BEQ to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.8 | ColumnqtechHQoSPortQBEQShaping | read-create | current | Port queue BEQ total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.9 | ColumnqtechHQoSPortQAF1QType | read-create | current | Port queue AF1 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.10 | ColumnqtechHQoSPortQAF1QWredWeight | read-create | current | Port queue AF1 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.11 | ColumnqtechHQoSPortQAF1QWredName | read-create | current | Port queue AF1 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.12 | ColumnqtechHQoSPortQAF1QDepth | read-create | current | Port queue AF1 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.13 | ColumnqtechHQoSPortQAF1QShaping | read-create | current | Port queue AF1 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.14 | ColumnqtechHQoSPortQAF2QType | read-create | current | Port queue AF2 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.15 | ColumnqtechHQoSPortQAF2QWredWeight | read-create | current | Port queue AF2 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.16 | ColumnqtechHQoSPortQAF2QWredName | read-create | current | Port queue AF2 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.17 | ColumnqtechHQoSPortQAF2QDepth | read-create | current | Port queue AF2 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.18 | ColumnqtechHQoSPortQAF2QShaping | read-create | current | Port queue AF2 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.19 | ColumnqtechHQoSPortQAF3QType | read-create | current | Port queue AF3 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.20 | ColumnqtechHQoSPortQAF3QWredWeight | read-create | current | Port queue AF3 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.21 | ColumnqtechHQoSPortQAF3QWredName | read-create | current | Port queue AF3 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.22 | ColumnqtechHQoSPortQAF3QDepth | read-create | current | Port queue BEQ to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.23 | ColumnqtechHQoSPortQAF3QShaping | read-create | current | Port queue AF3 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.24 | ColumnqtechHQoSPortQAF4QType | read-create | current | Port queue AF4 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.25 | ColumnqtechHQoSPortQAF4QWredWeight | read-create | current | Port queue AF4 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.26 | ColumnqtechHQoSPortQAF4QWredName | read-create | current | Port queue AF4 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.27 | ColumnqtechHQoSPortQAF4QDepth | read-create | current | Port queue AF4 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.28 | ColumnqtechHQoSPortQAF4QShaping | read-create | current | Port queue AF4 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.29 | ColumnqtechHQoSPortQEFQType | read-create | current | Port queue EF type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.30 | ColumnqtechHQoSPortQEFQWredWeight | read-create | current | Port queue EF to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.31 | ColumnqtechHQoSPortQEFQWredName | read-create | current | Port queue EF to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.32 | ColumnqtechHQoSPortQEFQDepth | read-create | current | Port queue EF to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.33 | ColumnqtechHQoSPortQEFQShaping | read-create | current | Port queue EF total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.34 | ColumnqtechHQoSPortQCS6QType | read-create | current | Port queue CS6 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.35 | ColumnqtechHQoSPortQCS6QWredWeight | read-create | current | Port queue CS6 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.36 | ColumnqtechHQoSPortQCS6QWredName | read-create | current | Port queue CS6 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.37 | ColumnqtechHQoSPortQCS6QDepth | read-create | current | Port queue CS6 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.38 | ColumnqtechHQoSPortQCS6QShaping | read-create | current | Port queue CS6 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.39 | ColumnqtechHQoSPortQCS7QType | read-create | current | Port queue CS7 type. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.40 | ColumnqtechHQoSPortQCS7QWredWeight | read-create | current | Port queue CS7 to wfq wred weight. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.41 | ColumnqtechHQoSPortQCS7QWredName | read-create | current | Port queue CS7 to wfq wred name. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.42 | ColumnqtechHQoSPortQCS7QDepth | read-create | current | Port queue CS7 to wfq depth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.10.2.1.43 | ColumnqtechHQoSPortQCS7QShaping | read-create | current | Port queue CS7 total bandwidth. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11 | NodeqtechHQoSIfAppObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1 | TableqtechHQoSIfAppTable | not-accessible | current | The HQoS config with this table. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1 | RowqtechHQoSIfAppEntry | not-accessible | current | A row in this table represents the interface HQoS config information. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.1 | ColumnqtechHQoSIfAppIndex | not-accessible | current | Interface index . |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.2 | ColumnqtechHQoSIfAppInPolicyName | read-write | current | Inbound policy name with this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.3 | ColumnqtechHQoSIfAppInPolicyIndex | read-only | current | Inbound policy index with this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.4 | ColumnqtechHQoSIfAppInPolicyLayer | read-write | current | Inbound policy layer with this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.5 | ColumnqtechHQoSIfAppOutPolicyName | read-write | current | Outbound policy name with this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.6 | ColumnqtechHQoSIfAppOutPolicyIndex | read-only | current | Outbound policy index with this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.7 | ColumnqtechHQoSIfAppOutPolicyLayer | read-write | current | Outbound policy layer with this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.8 | ColumnqtechHQoSIfAppPortQueueName | read-write | current | Port queue name with this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.9 | ColumnqtechHQoSIfAppPortQueueIndex | read-only | current | Port queue index with this interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.106.3.11.1.1.10 | ColumnqtechHQoSIfAppPortQueueShaping | read-write | current | Port queue total bandwidth with this interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| QtechCosType | INTEGER { cos-be(1), cos-af1(2), cos-af2(3), cos-af3(4), cos-af4(5), cos-ef(6), cos-cs6(7), cos-cs7(8) } | current | Class of service type. |
| QtechLayerType | INTEGER { link-layer(1), all-layer(2) } | current | Layer type to apply match rule. |
| QtechQDirectionType | INTEGER { d-input(1), d-output(2) } | current | Direction type. |
| QtechQType | INTEGER { q-lpq(1), q-wfq(2), q-pq(3) } | current | Queue type. |