QTECH-SMP-MIB
76 objects
This module defines the MIB security case requires. At present, this MIB could only be accessed by the specified SMP Server.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| Q-BRIDGE-MIB | VlanId |
| QTECH-SMI | qtechMgmt |
| QTECH-SNMP-AGENT-MIB | Community |
| QTECH-TC | ConfigStatus IfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.39 | IdentityqtechSMPMIB | This module defines the MIB security case requires. At present, this MIB could only be accessed by the specified SMP Server. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.39.1 | NodeqtechSMPMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.1 | ScalarqtechSMPServer | read-write | current | IP addresses for the SMP Server. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.2 | ScalarqtechSMPServerKey | read-write | current | Keys for the SMP Server. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.3 | ScalarqtechSMPEventSendSlice | read-write | current | The minimum interval of sending SU security event. The variable value must be less than the one defined by qtechSMPHICheckInterval. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.4 | ScalarqtechSMPPolicyDelete | read-write | current | This variable value: 0: No action is required; other values:Delete all policy information. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.5 | ScalarqtechSMPPolicyChecksum | read-only | current | The checksum information set on the current SMP policy table. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.6 | ScalarqtechSMPPolicyTimeout | read-write | current | Timeout time of SMP policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.7 | TableqtechSMPFrameRelayTable | not-accessible | current | SMP message forward table. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.7.1 | RowqtechSMPFrameRelayEntry | not-accessible | current | SMP message forward table. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.7.1.1 | ColumnqtechSMPFrameRelayIndex | read-only | current | SMP message forward table index. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.7.1.2 | ColumnqtechSMPFrameRelayContent | read-write | current | SMP message content with maximal 1024 bytes. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.7.1.3 | ColumnqtechSMPFrameRelayLength | read-write | current | SMP message length. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.7.1.4 | ColumnqtechSMPFrameRelayDestPort | read-write | current | The index of destination port SMP messages are sent to. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.7.1.5 | ColumnqtechSMPFrameRelayDestVlan | read-write | current | The VLAN ID of destination port SMP messages are sent to. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8 | TableqtechSMPPolicyTable | not-accessible | current | Security policy table. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1 | RowqtechSMPPolicyEntry | not-accessible | current | SMP policy table. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1.1 | ColumnqtechSMPGroupIndex | read-only | current | The index of the policy group which the current policy is in. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1.2 | ColumnqtechSMPPolicyIndex | read-only | current | The policy index. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1.3 | ColumnqtechSMPPolicyStatus | read-write | current | Entry state fields. For the detailed information, pls refer to QTECH-TC.mib. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1.4 | ColumnqtechSMPPolicyNumber | read-write | current | The policy sequence number. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1.5 | ColumnqtechSMPPolicyInstallPort | read-write | current | The index of port installed the policy. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1.6 | ColumnqtechSMPPolicyType | read-write | current | The action of policy template. Hi-isolate application failure can be detected by HI only. isolate: isolation action; blocked: blocking action; addrBind: addres… |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1.7 | ColumnqtechSMPPolicyContent | read-write | current | Content(80 bytes) of policy template. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1.8 | ColumnqtechSMPPolicyMask | read-write | current | Mask information(80 bytes) of policy template. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.8.1.9 | ColumnqtechSMPPolicyName | read-write | current | Policy name fields. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.9 | TableqtechSMPPolicyGroupTable | not-accessible | current | Security policy group. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.9.1 | RowqtechSMPPolicyGroupEntry | not-accessible | current | SMP policy group. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.9.1.1 | ColumnqtechSMPPolicyGroupIndex | read-only | current | Policy group index. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.9.1.2 | ColumnqtechSMPPolicyGroupCount | read-create | current | Policy count in the policy group. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.9.1.3 | ColumnqtechSMPPolicyGroupChecksum | read-create | current | The sole identification in the policy group. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.1.9.1.4 | ColumnqtechSMPPolicyGroupStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2 | NodeqtechEGMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1 | TableqtechEGUserTable | not-accessible | current | A table that contains generic information about every user that is authenticated. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1 | RowqtechEGUserEntry | not-accessible | current | The entry of authenticated user table. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.1 | ColumnqtechEGUserIpAddrType | read-only | current | The IP address type of the user. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.2 | ColumnqtechEGUserIpAddr | read-only | current | The IP address of the user. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.3 | ColumnqtechEGUserId | read-create | current | The Id of User. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.4 | ColumnqtechEGUserName | read-create | current | The Truename of User. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.5 | ColumnqtechEGUserGroupName | read-create | current | The group name of User. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.6 | ColumnqtechEGUserMac | read-create | current | The MAC Address of User. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.7 | ColumnqtechEGNasIp | read-create | current | The Ip Address of 1x Nas. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.8 | ColumnqtechEGNasPort | read-create | current | The user port of 1x Nas. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.9 | ColumnqtechEGGatewayIp | read-create | current | The ip address of gateway. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.10 | ColumnqtechEGVlanId | read-create | current | The vlan id of user. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.11 | ColumnqtechEGLoginTime | read-create | current | The login time of user. for example: 2010-07-12 12:35:56 |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.12 | ColumnqtechEGLogoutTime | read-create | current | The logout time of user. for example: 2010-07-12 12:35:56 |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.13 | ColumnqtechEGMessageType | read-create | current | The online(1)/offline(2) message type of the user. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.1.1.14 | ColumnqtechEGUserStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.2.2 | ScalarqtechEGUserDelete | read-write | current | This variable value: 0: No action is required; other values:Delete all qtechEGUser information. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.3 | NodeqtechSMPMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.39.3.1 | NodeqtechSMPMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.39.3.1.1 | ComplianceqtechDeviceMIBCompliance | current | The compliance statement for entities which implement the Qtech SMP MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.39.3.2 | NodeqtechSMPMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.39.3.2.1 | GroupqtechSMPServerMibGroup | current | Collection of SMP Server information. | |
| 1.3.6.1.4.1.27514.1.1.10.2.39.3.2.2 | GroupqtechSMPClientMibGroup | current | Collection of restricted information of SMP Client management. | |
| 1.3.6.1.4.1.27514.1.1.10.2.39.3.2.3 | GroupqtechSMPPolicyMibGroup | current | Policy information collection. | |
| 1.3.6.1.4.1.27514.1.1.10.2.39.3.2.4 | GroupqtechSMPFrameRelayMibGroup | current | Information collection of message forward table. | |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535 | NodeqtechSMPTraps | |||
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.1 | ScalarqtechSMPSwitchIP | accessible-for-notify | current | IP addresses for the switch sending the Trap. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.2 | ScalarqtechSMPSwitchInterfaceID | accessible-for-notify | current | The interface receiving the messages to be forwarded. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.3 | ScalarqtechSMPSwitchInterfaceVLANID | accessible-for-notify | current | The VLAN ID of the switch interface receiving the messages to be forwarded. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.4 | ScalarqtechSMPFrameContentLength | accessible-for-notify | current | The encapsulated message length, which can not exceed 1024. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.5 | ScalarqtechSMPFrameContent | accessible-for-notify | current | The encapsulated message whose length can not exceed 1024. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.6 | NotificationqtechSMPFrameRelayTrap | current | Trap message includes: IP address for the specified received message, port receiving the message, message length and message content. | |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.7 | ScalarqtechSMPArpAttackSubnetIP | accessible-for-notify | current | IP addresses for all subnets of SVI where the attack source locates. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.8 | ScalarqtechSMPArpAttackSubnetIPNum | accessible-for-notify | current | Subnet IP address number. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.9 | ScalarqtechSMPArpAttackInterfaceSlot | accessible-for-notify | current | The slot number for the device connecting the attack source. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.10 | ScalarqtechSMPArpAttackInterfacePort | accessible-for-notify | current | The interface number for the device connecting the attack source. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.11 | ScalarqtechSMPArpAttackInterfaceVlanID | accessible-for-notify | current | The VLAN ID of VLAN where the attack source locates. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.12 | ScalarqtechSMPArpAttackFrameContent | accessible-for-notify | current | The ARP messages sent from the attack source. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.13 | ScalarqtechSMPArpAttackStatus | accessible-for-notify | current | Show whether the device is attacked by the attack source or not. true: attack occurred; false: attack has been removed. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.14 | ScalarqtechSMPArpAttackCriticalStatus | accessible-for-notify | current | The severity level of device attack by attack source: critical(1), and advertising the SMP Server. emergencies(2) attack automatically and advertise the SMP Se… |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.15 | ScalarqtechSMPArpAttackMac | accessible-for-notify | current | MAC address for the device connecting the attack source. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.16 | ScalarqtechSMPArpAttackInterfaceIndex | accessible-for-notify | current | The interface index for the device connecting the attack source. |
| 1.3.6.1.4.1.27514.1.1.10.2.39.65535.17 | NotificationqtechSMPArpAttackTrap | current | Trap message includes: IP addresses for all subnets of SVI where the attack source locates, Subnet IP address number, Slot number the attack source attacks, Po… |