QTECH-TRAFFIC-CTRL-MIB
21 objects
This module defines qtech traffic control mibs.
Imported Objects
| IF-MIB | ifIndex |
| P-BRIDGE-MIB | EnabledStatus |
| QTECH-SMI | qtechMgmt |
| QTECH-TC | IfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.14 | IdentityqtechTrafficCtrlMIB | This module defines qtech traffic control mibs. | ||
| 1.3.6.1.4.1.27514.1.1.10.2.14.1 | NodeqtechTrafficCtrlMIBObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1 | TableqtechPtTrafficCtrlTable | not-accessible | current | list of port-based traffic control configuration objects. |
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1 | RowqtechPtTrafficCtrlEntry | not-accessible | current | Entry contains port-based traffic control configuration objects. |
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.1 | ColumnqtechPtTrafficCtrlIfIndex | read-only | current | |
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.2 | ColumnqtechPtProtectedPortStatus | read-write | current | Some applications require that no traffic be forwarded by the Layer 2 protocol between ports on the same switch. In such an environment, there is no exchange o… |
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.3 | ColumnqtechPtBroadcastStormControlStatus | read-write | current | the broadcast storm control status of a port, can be opened by setting its value to Enabled(1), or closed by setting its value to Disabled(2). This attribute a… |
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.4 | ColumnqtechPtMulticastStormControlStatus | read-write | current | the multicast storm control status of a port, can be opened by setting its value to Enabled(1), or closed by setting its value to Disabled(2). This attribute a… |
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.5 | ColumnqtechPtUnicastStormControlStatus | read-write | current | the unknown unicast storm control status of a port, can be opened by setting its value to Enabled(1), or closed by setting its value to Disabled(2). This attri… |
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.6 | ColumnqtechPtBroadcastStormControlLevel | read-write | current | The percentage of maximal traffic allowed to go through the broadcast packets in the interface bandwidth. When the traffic of broadcast packets exceeds the per… |
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.7 | ColumnqtechPtMulticastStormControlLevel | read-write | current | The percentage of maximal traffic allowed to go through the multicast packets in the interface bandwidth. When the traffic of multicast packets exceeds the per… |
| 1.3.6.1.4.1.27514.1.1.10.2.14.1.1.1.8 | ColumnqtechPtUnicastStormControlLevel | read-write | current | The percentage of maximal traffic allowed to go through the unknown unicast packets in the interface bandwidth. When the traffic of unknown unicast packets exc… |
| 1.3.6.1.4.1.27514.1.1.10.2.14.2 | NodeqtechPtTrafficCtrlTraps | |||
| 1.3.6.1.4.1.27514.1.1.10.2.14.2.1 | ScalarstormViolationAlarmType | accessible-for-notify | current | The type of storm of interface |
| 1.3.6.1.4.1.27514.1.1.10.2.14.2.2 | NotificationstormViolationAlarm | current | while the storm threshold has been set, if more broadcast is send to the port, then this trap will be sent. | |
| 1.3.6.1.4.1.27514.1.1.10.2.14.3 | NodeqtechPtTrafficCtrlMIBConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.14.3.1 | NodeqtechPtTrafficCtrlMIBCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.14.3.1.1 | ComplianceqtechPtTrafficCtrlMIBCompliance | current | The compliance statement for entities which implement the Qtech IfConfig MIB | |
| 1.3.6.1.4.1.27514.1.1.10.2.14.3.2 | NodeqtechPtTrafficCtrlMIBGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.14.3.2.1 | GroupqtechPtTrafficCtrlMIBGroup | current | A collection of objects providing port traffic control configure. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Percent | INTEGER (1..100) | current | An integer that is in the range of a percent value. |