QTECH-VPLS-GENERIC-MIB
57 objects
Copyright (C) Qtech Networks. This MIB module contains generic managed object definitions for Virtual Private LAN Services as in [RFC4762] and [RFC4761] This MIB module enables the use of any underlying PseudoWire network.
Imported Objects
| IF-MIB | -- We need to add this for vpls instance InterfaceIndexOrZero |
| PW-TC-STD-MIB | -- RFC3411 PwIndexType |
| QTECH-SMI | -- RFC4265 qtechMgmt |
| SNMP-FRAMEWORK-MIB | -- RFC2579 SnmpAdminString |
| SNMPv2-CONF | -- RFC2578 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | -- RFC2580 TruthValue RowStatus StorageType |
| VPN-TC-STD-MIB | VPNIdOrZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.27514.1.1.10.2.77 | IdentityqtechvplsGenericDraft01MIB | Copyright (C) Qtech Networks. This MIB module contains generic managed object definitions for Virtual Private LAN Services as in [RFC4762] and [RFC4761] This M… | ||
| 1.3.6.1.4.1.27514.1.1.10.2.77.0 | NodeqtechvplsNotifications | |||
| 1.3.6.1.4.1.27514.1.1.10.2.77.0.1 | NotificationqtechvplsFwdFullAlarmRaised | current | The qtechvplsFwdFullAlarmRaised notification is generated when the utilization of the Forwarding database is above the value specified by qtechvplsConfigFwdFul… | |
| 1.3.6.1.4.1.27514.1.1.10.2.77.0.2 | NotificationqtechvplsFwdFullAlarmCleared | current | The qtechvplsFwdFullAlarmCleared notification is generated when the utilization of the Forwarding database is below the value specified by qtechvplsConfigFwdFu… | |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1 | NodeqtechvplsObjects | |||
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.1 | ScalarqtechvplsConfigIndexNext | read-only | current | This object contains an appropriate value to be used for qtechvplsConfigIndex when creating entries in the qtechvplsConfigTable. The value 0 indicates that no … |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2 | TableqtechvplsConfigTable | not-accessible | current | This table specifies information for configuring and monitoring Virtual Private Lan Services(VPLS). |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1 | RowqtechvplsConfigEntry | not-accessible | current | A row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by qtechvplsConfigIndex, which uniquely identifies a sing… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.1 | ColumnqtechvplsConfigIndex | not-accessible | current | Unique index for the conceptual row identifying a VPLS service. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.2 | ColumnqtechvplsConfigName | read-create | current | A textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.3 | ColumnqtechvplsConfigDescr | read-create | current | A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length o… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.4 | ColumnqtechvplsConfigAdminStatus | read-only | current | The desired administrative state of the VPLS service. If the administrative status of the Vpls service is changed to enable then this service is able to utiliz… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.5 | ColumnqtechvplsConfigMacLearning | read-create | current | This object specifies if MAC Learning is enabled in this service. If this object is true then Mac Learning is enabled. If false, then Mac Learning is disabled. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.6 | ColumnqtechvplsConfigDiscardUnknownDest | read-create | current | If the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are proces… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.7 | ColumnqtechvplsConfigMacAging | read-only | current | If the value of this object is 'true' then the MAC aging process is enabled in this VPLS. If 'false', then the MAC aging process is disabled |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.8 | ColumnqtechvplsConfigFwdFullHighWatermark | read-create | current | This object specifies the utilization of the forwarding database for this VPLS instance at which the qtechvplsFwdFullAlarmRaised notification will be sent. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.9 | ColumnqtechvplsConfigFwdFullLowWatermark | read-create | current | This object specifies the utilization of the forwarding database for this VPLS instance at which the qtechvplsFwdFullAlarmCleared notification will be sent. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.10 | ColumnqtechvplsConfigRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) stat… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.11 | ColumnqtechvplsConfigMtu | read-create | current | The value of this object specifies the MTU of this vpls instance. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.12 | ColumnqtechvplsConfigVpnId | read-create | current | This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.13 | ColumnqtechvplsConfigServiceType | read-create | current | The value of this object specifies the type of service emulated by this vpls instance. Invalid for RFC 4762 |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.14 | ColumnqtechvplsConfigServiceSignal | read-create | current | The value of this object indicates vpls is created with LDP or BGP signalling. The value of this object must be specifed when the row is created and cannot be … |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.3 | TableqtechvplsStatusTable | not-accessible | current | This table provides information for monitoring Virtual Private Lan Services(VPLS). |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.3.1 | RowqtechvplsStatusEntry | not-accessible | current | A row in this table represents a Virtual Private Lan Service(VPLS) in a packet network. It is indexed by qtechvplsConfigIndex, which uniquely identifies a sing… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.3.1.1 | ColumnqtechvplsStatusOperStatus | read-only | current | The current operational state of this VPLS Service. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.3.1.2 | ColumnqtechvplsStatusPeerCount | read-only | current | This objects specifies the number of peers present in this vpls instance. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.4 | TableqtechvplsPwBindTable | not-accessible | current | This table provides an association between a VPLS service and the corresponding Pseudo Wires. A service can have more than one Pseudo Wire association. Pseudo … |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.4.1 | RowqtechvplsPwBindEntry | not-accessible | current | Each row represents an association between a VPLS instance and one or more Pseudo Wires defined in the pwTable. Each index is unique in describing an entry in … |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.4.1.1 | ColumnqtechvplsPwBindIndex | not-accessible | current | Unique index for PW bind in vpls instance. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.4.1.2 | ColumnqtechvplsPwBindConfigType | read-only | current | The value of this object indicates whether the Pseudo Wire binding was created manually or via autodiscovery. The value of this object must be specifed when th… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.4.1.3 | ColumnqtechvplsPwBindType | read-only | current | The value of this object indicates whether the Pseudo Wire binding is of type mesh or spoke. The value of this object must be specifed when the row is created … |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.5 | TableqtechvplsBgpADConfigTable | not-accessible | current | This table specifies information for configuring BGP Auto-discovery parameters for a given Vpls service. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.5.1 | RowqtechvplsBgpADConfigEntry | not-accessible | current | A row in this table represents BGP based autodiscovery is in use for this instance of Vpls. A row in this table is indexed by qtechvplsConfigIndex, which uniqu… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.5.1.1 | ColumnqtechvplsBgpADConfigRouteDistinguisher | read-create | current | The route distinguisher for this VPLS. See [RFC4364] for a complete definition of a route distinguisher. for more details on use of a route distinguisher for a… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.5.1.2 | ColumnqtechvplsBgpADConfigRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) stat… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.6 | TableqtechvplsBgpRteTargetTable | not-accessible | current | This table specifies the list of Route Targets imported or exported by BGP during auto-discovery of VPLS. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1 | RowqtechvplsBgpRteTargetEntry | not-accessible | current | An entry in this table specifies the value of the Route Target being used by BGP. Depending on the value of vplsBgpRteTargetType an RT might be exported or imp… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1.1 | ColumnqtechvplsBgpRteTargetIndex | not-accessible | current | This index along with qtechvplsConfigIndex,identifies one entry in the qtechvplsBgpRteTargetTable. By keeping qtechvplsConfigIndex constant and using new value… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1.2 | ColumnqtechvplsBgpRteTargetRTType | read-create | current | Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target,… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1.3 | ColumnqtechvplsBgpRteTargetRT | read-create | current | The route target associated with the VPLS service. For more details on use of route targets for a VPLS service, see [RFC4761] |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1.4 | ColumnqtechvplsBgpRteTargetRTRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modif… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.7 | TableqtechvplsIfBindTable | not-accessible | current | This table provides an association between a VPLS service and interface. A service can bind more than one interface. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.7.1 | RowqtechVplsIfBindEntry | not-accessible | current | Each row represents an association between a VPLS instance and one or more interface. Each index is unique in describing an entry in this table. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.7.1.1 | ColumnqtechvplsIfBindIndex | read-create | current | Interface index for vpls instance. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.7.1.2 | ColumnqtechvplsSiteId | read-create | current | VE id associated with the VPLS service. |
| 1.3.6.1.4.1.27514.1.1.10.2.77.1.7.1.3 | ColumnqtechvplsIfRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modif… |
| 1.3.6.1.4.1.27514.1.1.10.2.77.2 | NodeqtechvplsConformance | |||
| 1.3.6.1.4.1.27514.1.1.10.2.77.2.1 | NodeqtechvplsCompliances | |||
| 1.3.6.1.4.1.27514.1.1.10.2.77.2.1.1 | ComplianceqtechvplsModuleFullCompliance | current | Compliance requirement for implementations that provide full support for VPLS-GENERIC-DRAFT-01-MIB. Such devices can then be monitored and configured using thi… | |
| 1.3.6.1.4.1.27514.1.1.10.2.77.2.1.2 | ComplianceqtechvplsModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for VPLS-GENERIC-DRAFT-01-MIB. Such devices can then be monitored but cannot be … |
| 1.3.6.1.4.1.27514.1.1.10.2.77.2.2 | NodeqtechvplsGroups | |||
| 1.3.6.1.4.1.27514.1.1.10.2.77.2.2.1 | GroupqtechvplsGroup | current | The group of objects supporting management of L2VPN VPLS services | |
| 1.3.6.1.4.1.27514.1.1.10.2.77.2.2.2 | GroupqtechvplsPwBindGroup | current | The group of objects supporting management of Pseudo Wire (PW) Binding to VPLS. | |
| 1.3.6.1.4.1.27514.1.1.10.2.77.2.2.3 | GroupqtechvplsNotificationGroup | current | The group of notifications supporting the Notifications generated for VPLS Services |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| QtechVplsBgpRouteDistinguisher | OCTET STRING(SIZE (0..256)) | current | Syntax for a route distinguisher. For a complete definition of a route distinguisher, see [RFC4364]. For more details on use of a route distinguisher for a VPLS service, see [RFC4761] |
| QtechVplsBgpRouteTarget | OCTET STRING(SIZE (0..256)) | current | Syntax for a route target. For a complete definition of a route target, see [RFC4364]. |
| QtechVplsBgpRouteTargetType | INTEGER { import(1), export(2), both(3) } | current | Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364]. |