QTS-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.55062 | NodeQNAP | |||
| 1.3.6.1.4.1.55062.1 | NodeQTS | |||
| 1.3.6.1.4.1.55062.1.12 | Nodesystem | |||
| 1.3.6.1.4.1.55062.1.12.1 | NodesystemEventMsg | |||
| 1.3.6.1.4.1.55062.1.12.1.101 | ScalareventInformMsg | read-only | current | Information event of NAS system. |
| 1.3.6.1.4.1.55062.1.12.1.102 | ScalareventWarningMsg | read-only | current | Warning event of NAS system. |
| 1.3.6.1.4.1.55062.1.12.1.103 | ScalareventErrorMsg | read-only | current | Error event of NAS system. |
| 1.3.6.1.4.1.55062.1.12.2 | NodesystemTraps | |||
| 1.3.6.1.4.1.55062.1.12.2.1 | NotificationeventInform | current | Info: %s | |
| 1.3.6.1.4.1.55062.1.12.2.2 | NotificationeventWarning | current | Warn: %s | |
| 1.3.6.1.4.1.55062.1.12.2.4 | NotificationeventError | current | Error: %s | |
| 1.3.6.1.4.1.55062.1.12.3 | ScalarsystemModel | read-only | current | System model name |
| 1.3.6.1.4.1.55062.1.12.4 | Scalarhostname | read-only | current | Host name |
| 1.3.6.1.4.1.55062.1.12.5 | ScalarserialNumber | read-only | current | Enclosure Serial Number. |
| 1.3.6.1.4.1.55062.1.12.6 | ScalarfirmwareVersion | read-only | current | Firmware Version |
| 1.3.6.1.4.1.55062.1.12.7 | ScalarfirmwareUpgradeAvailable | read-only | current | Firmware can upgrade or not |
| 1.3.6.1.4.1.55062.1.12.8 | ScalarsysFanNumber | read-only | current | The number of system fan (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.55062.1.12.9 | TablesystemFanTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of SysFanNumber. |
| 1.3.6.1.4.1.55062.1.12.9.1 | RowsysFanEntry | not-accessible | current | An system fan entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.55062.1.12.9.1.1 | ColumnsysFanIndex | read-only | current | A unique value for each system fan. Its value ranges between 1 and the value of SysFanNumber. The value for each interface must remain constant at least from o… |
| 1.3.6.1.4.1.55062.1.12.9.1.2 | ColumnsysFanDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.4.1.55062.1.12.9.1.3 | ColumnsysFanSpeed | read-only | current | System fan speed. |
| 1.3.6.1.4.1.55062.1.12.10 | ScalarcpuTemperature | read-only | current | CPU temperature |
| 1.3.6.1.4.1.55062.1.12.11 | ScalarsystemTemperature | read-only | current | System temperature |
| 1.3.6.1.4.1.55062.1.12.12 | ScalarsystemCPU-Usage | read-only | current | System CPU usage |
| 1.3.6.1.4.1.55062.1.12.13 | ScalarsystemTotalMem | read-only | current | System total memory |
| 1.3.6.1.4.1.55062.1.12.14 | ScalarsystemFreeMem | read-only | current | System free memory |
| 1.3.6.1.4.1.55062.1.12.15 | ScalarsystemAvailableMem | read-only | current | System available memory |
| 1.3.6.1.4.1.55062.1.12.16 | ScalarsystemUsedMemory | read-only | current | System used memory |
| 1.3.6.1.4.1.55062.1.12.17 | ScalarsystemCacheMemory | read-only | current | System cached memory |
| 1.3.6.1.4.1.55062.1.12.18 | ScalarsystemBufferMemory | read-only | current | System buffered memory |
| 1.3.6.1.4.1.55062.1.12.19 | ScalarsysPowerStatus | read-only | current | System power status. |
| 1.3.6.1.4.1.55062.1.12.20 | ScalarsysUPSStatus | read-only | current | System UPS status. |
| 1.3.6.1.4.1.55062.1.12.21 | ScalarsysUptime | read-only | current | The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime… |
| 1.3.6.1.4.1.55062.1.14 | Nodeservices | |||
| 1.3.6.1.4.1.55062.1.14.1 | ScalarnfsV2V3IsEnabled | read-only | current | NFS V2/V3 enable flag |
| 1.3.6.1.4.1.55062.1.14.2 | ScalarnfsV4IsEnabled | read-only | current | NFS V4 enable flag |
| 1.3.6.1.4.1.55062.1.14.3 | ScalarhttpPort | read-only | current | HTTP port |
| 1.3.6.1.4.1.55062.1.14.4 | ScalarhttpsPort | read-only | current | HTTPs port |
| 1.3.6.1.4.1.55062.1.14.5 | ScalarsshIsEnabled | read-only | current | SSH enable flag |
| 1.3.6.1.4.1.55062.1.14.6 | ScalarsshSFTPEnabled | read-only | current | SFTP enable flag |
| 1.3.6.1.4.1.55062.1.14.7 | ScalarsshPortNumber | read-only | current | SSH port number |
| 1.3.6.1.4.1.55062.1.14.8 | ScalartelnetIsEnabled | read-only | current | Telnet enable flag |
| 1.3.6.1.4.1.55062.1.14.9 | ScalartelnetPortNumber | read-only | current | Telnet port number |
| 1.3.6.1.4.1.55062.1.14.10 | ScalarftpEnabled | read-only | current | FTP enable flag |
| 1.3.6.1.4.1.55062.1.14.11 | ScalarftpProtocolStandardEnabled | read-only | current | FTP standard protocol flag |
| 1.3.6.1.4.1.55062.1.14.12 | ScalarftpProtocolSSL-TLSEnabled | read-only | current | FTP SSL/TLS protocol flag |
| 1.3.6.1.4.1.55062.1.14.13 | ScalarftpPortNumber | read-only | current | FTP port number |
| 1.3.6.1.4.1.55062.1.14.14 | ScalarftpUnicodeSupportEnabled | read-only | current | FTP support unicode flag |
| 1.3.6.1.4.1.55062.1.14.15 | ScalarftpAnnonymousaccessEnabled | read-only | current | FTP annonymous access flag |
| 1.3.6.1.4.1.55062.1.14.16 | ScalarftpMaxConnectionsAllowed | read-only | current | FTP max connections |
| 1.3.6.1.4.1.55062.1.14.17 | ScalarftpMaxConnectionsPerAccount | read-only | current | FTP max connections per account |
| 1.3.6.1.4.1.55062.1.14.18 | ScalarftpMaxUploadRate | read-only | current | FTP max upload rate (KB/s) |
| 1.3.6.1.4.1.55062.1.14.19 | ScalarftpMaxDownloadRate | read-only | current | FTP max download rate (KB/s) |