RAD-BROADBAND-MIB
34 objects
Broadband Interface MIB.
Imported Objects
| IF-MIB | ifIndex |
| RAD-SMI-MIB | diverseIfWanGen |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.1.6.8 | IdentitybroadbandIf | Broadband Interface MIB. | ||
| 1.3.6.1.4.1.164.3.1.6.8.1 | NodebdbandConfig | |||
| 1.3.6.1.4.1.164.3.1.6.8.1.1 | TableprtBdbandIndTable | not-accessible | current | The Indication Signal table. |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1 | RowprtBdbandIndEntry | not-accessible | current | An entry in the Indication Signal table. |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.1 | ColumnprtBdbandCnfgIdx | read-only | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag… |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.2 | ColumnprtBdbandIdx | read-only | current | This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.3 | ColumnprtBdbandIndSig | read-only | current | This object indicates a unique Indication Signal. ais(1) = AIS = Alarm Indication Signal. rdi(2) = RDI = Remote Defect Indication. |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.4 | ColumnprtBdbandIndEvent | read-only | current | This object indicates a unique Event that can cause the Indication Signal. slm(2) = SLM = Signal Label Mismatch fail (3) = other failures eed(4) = EED = Excess… |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.5 | ColumnprtBdbandIndSigEnable | read-create | current | This object allows user to define if the event specified by prtBdbandIndEvent will cause creation of the Indication Signal specified by prtBdbandIndSig or not.… |
| 1.3.6.1.4.1.164.3.1.6.8.1.1.1.6 | ColumnprtBdbandRowStatus | read-create | current | Creation/Deletion of rows in the table. |
| 1.3.6.1.4.1.164.3.1.6.8.1.2 | TableprtPhyConfigTable | not-accessible | current | The Phy Config table. Used now for Phy25.6 Mbps. |
| 1.3.6.1.4.1.164.3.1.6.8.1.2.1 | RowprtPhyConfigEntry | not-accessible | current | An entry in the Phy Config table. |
| 1.3.6.1.4.1.164.3.1.6.8.1.2.1.1 | ColumnprtPhyTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.164.3.1.6.8.1.2.1.2 | ColumnprtPhyValidIntervals | read-only | current | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in … |
| 1.3.6.1.4.1.164.3.1.6.8.2 | NodeprtPhyPerfHistory | |||
| 1.3.6.1.4.1.164.3.1.6.8.2.1 | TableprtPhyCurrentTable | not-accessible | current | The 25.6 Mbps Section/Line Current table. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1 | RowprtPhyCurrentEntry | not-accessible | current | An entry in the 25.6 Mbps Line Current table. ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.1 | ColumnprtPhyCurrentLOS | read-only | current | The counter associated with the number of Loss Of Sync seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.2 | ColumnprtPhyCurrentLSV | read-only | current | The counter associated with the number of Line symbol violation seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.3 | ColumnprtPhyCurrentUAS | read-only | current | The counter associated with the number of UAS encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.4 | ColumnprtPhyCurrentSES | read-only | current | The counter associated with the number of SES encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.5 | ColumnprtPhyCurrentES | read-only | current | The number of Errored Seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.6 | ColumnprtPhyCurrentStatus | read-only | current | The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
| 1.3.6.1.4.1.164.3.1.6.8.2.1.1.7 | ColumnprtPhyCurrentLOF | read-only | current | The number of Loss of Frames, encountered by an interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2 | TableprtPhyIntervalTable | not-accessible | current | The Line Interval table. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1 | RowprtPhyIntervalEntry | not-accessible | current | An entry in the 25.6 Mbps Line Interval table. ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.1 | ColumnprtPhyIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.2 | ColumnprtPhyIntervalLOS | read-only | current | The counter associated with the number of Loss Of Sync seconds , encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.3 | ColumnprtPhyIntervalLSV | read-only | current | The counter associated with the number of line symbol violation seconds , encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute … |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.4 | ColumnprtPhyIntervalUAS | read-only | current | The counter associated with the number of UAS encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.5 | ColumnprtPhyIntervalSES | read-only | current | The counter associated with the number of SES encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.6 | ColumnprtPhyIntervalES | read-only | current | The number of Errored Seconds, encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.7 | ColumnprtPhyIntervalStatus | read-only | current | The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out. |
| 1.3.6.1.4.1.164.3.1.6.8.2.2.1.8 | ColumnprtPhyIntervalLOF | read-only | current | The number of Loss of Frames, encountered by an interface in one of the previous 96, individual 15 minute intervals. |