MIB Viewer

RAD-GEN-MIB

1189 objects
RAD General MIB.
Imported Objects
BFD-TC-STD-MIB-RBfdDiagTC BfdIntervalTC
DISMAN-SCHEDULE-MIBschedEntry
ENTITY-MIBentPhysicalAlias entPhysicalDescr PhysicalIndexOrZero
IANAifType-MIBIANAifType
IF-MIBifAlias ifIndex
INET-ADDRESS-MIBInetAddress InetAddressType InetPortNumber
RAD-SMI-MIBfileTransfer radGen radSpecificDevices systems
RAD-TCAlarmForwardingCause FileType RadEntityType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-MIBsysName
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDateAndTime DisplayString MacAddress RowPointer RowStatus TAddress TDomain TEXTUAL-CONVENTION TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.4.1.164.6.1.0IdentitysystemsEventscurrentThe events for RAD products.
1.3.6.1.4.1.164.6.1.0.1NotificationtftpStatusChangeTrapcurrentThis trap is sent whenever the status of tftp changed.
1.3.6.1.4.1.164.6.1.0.2NotificationagnStatusChangeTrapcurrentThis trap is sent whenever the state of the entity the agent is responsible for changed. TDM devices will send agnTestStatus variable to indicate the current t…
1.3.6.1.4.1.164.6.1.0.3NotificationprtStatusChangeTrapcurrentThis trap is sent whenever the state of a port changed. Attached, will be parameter/s that indicate the new port status. The attached variables will be specifi…
1.3.6.1.4.1.164.6.1.0.4NotificationswdlStatusResultcurrentThis notification is sent when Software Down Load is finished. The attached object indicates the File Name.
1.3.6.1.4.1.164.6.1.0.5NotificationintSwdlSlotFileMismatchcurrentThis notification is sent when the card in the chosen slot doesn't match the chosen file. The attached object indicates the File Name.
1.3.6.1.4.1.164.6.1.0.6NotificationagnCounterChangecurrentThis notification is sent when the value of a specific Counter is changed. Agent can send as attached object the updated Counter. For details about this Counte…
1.3.6.1.4.1.164.6.1.0.7NotificationprtClkSrcChangeTrapcurrentThis trap is sent upon any port clock change.
1.3.6.1.4.1.164.6.1.0.8NotificationmoduleFailTrapcurrentThis trap is sent upon a module failure.
1.3.6.1.4.1.164.6.1.0.9NotificationmoduleInitFailTrapcurrentThis trap is sent upon a module initialization failure.
1.3.6.1.4.1.164.6.1.0.10NotificationclkSrcChangeTrapcurrentThis trap is sent upon any change in Clock Source.
1.3.6.1.4.1.164.6.1.0.11NotificationagnUploadDataTrapcurrentThis trap is sent upon an upload data session termination. For more details see product specification.
1.3.6.1.4.1.164.6.1.0.12NotificationenrollmentTrapcurrentThis trap is a periodically trap, which sent to manager untill Agent get any response (Get or Set) from this manager.
1.3.6.1.4.1.164.6.1.0.13NotificationagnPowerFailureTrapcurrentThis trap is sent upon power failure. It is applicable for the following devices: 1. Devices having one PS unit, which sense the failure in advance, and still …
1.3.6.1.4.1.164.6.1.0.14NotificationagnFanFailureTrapcurrentThis trap is sent upon fan failure/recovery.
1.3.6.1.4.1.164.6.1.0.15NotificationagnSystemParameterChangeTrapcurrentThis trap is sent upon any change of the systemParameter value.
1.3.6.1.4.1.164.6.1.0.16NotificationagnConfigDBChecksumErrorcurrentThis trap indicates that the database currently stored in the non-volatile memory of the device is corrupted
1.3.6.1.4.1.164.6.1.0.17NotificationagnAlarmBufferOverflowcurrentThis trap indicates that the quantity of alarm messages which have been written in the alarm buffer, since the last clear command, exceeds predefined threshold…
1.3.6.1.4.1.164.6.1.0.18NotificationagnAlarmBufferClearcurrentThis trap indicates that alarm buffer has been cleared.
1.3.6.1.4.1.164.6.1.0.19NotificationagnParametersValueChangedcurrentThis trap indicates that due to software upgrade, some of the parameters are assigned new values
1.3.6.1.4.1.164.6.1.0.20NotificationagnDriverSwMismatchcurrentThere is mismatch between the SW driver and the HW of the device uplink interface.
1.3.6.1.4.1.164.6.1.0.21NotificationagnActualLowRatecurrentThe main link is synchronized at a rate lower than expected.
1.3.6.1.4.1.164.6.1.0.22NotificationxModemFileTransferStatusTrapcurrentThis trap is sent in the following cases: - When an xModem File Transfer Session begins. In this case, the trapVal.1 string sent will be: 'Start'. - When an xM…
1.3.6.1.4.1.164.6.1.0.23NotificationagnStationClkFailureTrapcurrentThis trap is sent upon Station Clock failure.
1.3.6.1.4.1.164.6.1.0.24NotificationsuccessfulLogincurrentThis trap is sent when a user performed successful Login via Terminal/Telnet/Web. This trap is used when the device is located at End-User's premises while man…
1.3.6.1.4.1.164.6.1.0.25NotificationfailedLogincurrentThis trap is sent when a user tried to Login via Terminal/Telnet/Web and failed. This trap is used when the device is located at End-User's premises while mana…
1.3.6.1.4.1.164.6.1.0.26NotificationmodlChangeTrapcurrentThis trap is sent whenever a module is inserted or removed. The trap should include the new module type (e.g. modlParamType).
1.3.6.1.4.1.164.6.1.0.27NotificationlicenseUpdateTrapcurrentThis trap is sent whenever a license is successfully downloaded or whenever a license's demo duration is expired.
1.3.6.1.4.1.164.6.1.0.28NotificationagnClkSrcStateChangeTrapcurrentThe trap is sent upon change in Recovery Clock State.
1.3.6.1.4.1.164.6.1.0.29NotificationagnSelfTestResultChangeTrapcurrentThe trap is sent upon each change in the result of a Self State operation.
1.3.6.1.4.1.164.6.1.0.30NotificationagnCurrClkStateChangeTrapcurrentThe trap is sent upon change in the state of the current (active) clock, when it is a Recovery Clock.
1.3.6.1.4.1.164.6.1.0.31NotificationagnClkSrcFrequencyAlarmTrapcurrentThe trap is sent upon Recovered Clock Frequency alarm.
1.3.6.1.4.1.164.6.1.0.32NotificationprtLoopDetectTrapcurrentThis trap is sent upon Loop Detect (On/Off) on a certain port.
1.3.6.1.4.1.164.6.1.0.41NotificationsystemDeviceTemperatureOracurrentThis trap indicates that Device Temprature is above or below range.
1.3.6.1.4.1.164.6.1.0.45NotificationsystemAlternateConfigLoadedcurrentThis trap indicates that one of the following files: factory-default-config, rollback-config, user-default-config or other file was loaded as running-config. N…
1.3.6.1.4.1.164.6.1.0.47NotificationsystemConfigurationSanitycurrentThis notification MUST be sent if error has occurred while loading a configuration file. It MUST only be sent once per file and only if the error policy is eit…
1.3.6.1.4.1.164.6.1.0.49NotificationsystemDyingGaspcurrentThis Trap Indicates power Dying Gasp
1.3.6.1.4.1.164.6.1.0.50NotificationsystemDyingGaspRecoverycurrentThis Trap Indicates power Dying Gasp Recovery
1.3.6.1.4.1.164.6.1.0.51NotificationsystemTraceMsgFatalErrorcurrentThis Trap indicates that a critical error has occured in the device. A corresponding message was added to the Trace Log Buffer.
1.3.6.1.4.1.164.6.1.0.52NotificationsystemTraceMsgExceptioncurrentThis Trap indicates that an error has occured in the device. A corresponding message was added to the Trace Log Buffer.
1.3.6.1.4.1.164.6.1.0.55NotificationsystemDeviceStartupcurrentThis Trap indicates that warm start or cold start of the device has occurred.
1.3.6.1.4.1.164.6.1.0.58NotificationsystemHardwareFailurecurrentThis Trap indicates that a Hardware Failure has occured.
1.3.6.1.4.1.164.6.1.0.63NotificationsystemStartupConfigUnconfirmedcurrentThis Trap is sent during SW installation, if the user asked for a startup configuration confirmation and the device didn't receive a confirmation from the user…
1.3.6.1.4.1.164.6.1.0.64NotificationfanFailurecurrentThis Trap indicates that there is a failure on the current fan.
1.3.6.1.4.1.164.6.1.0.70NotificationsystemSuccessfulLogincurrentThis Trap indicates that a successful login occurred.
1.3.6.1.4.1.164.6.1.0.71NotificationsystemFailedLogincurrentThis Trap indicates that an unsuccessful login occurred.
1.3.6.1.4.1.164.6.1.0.72NotificationsystemLogoutcurrentThis Trap indicates that logout was performed from the device.
1.3.6.1.4.1.164.6.1.0.77NotificationsystemTrapHardSyncStartcurrentThis Trap indicates that hard trap synchronization process between the device and NMS has started.
1.3.6.1.4.1.164.6.1.0.78NotificationsystemTrapHardSyncEndcurrentThis Trap indicates that hard trap synchronization process between the device and NMS has ended.
1.3.6.1.4.1.164.6.1.0.82NotificationsystemUserResetcurrentThis Trap Indicates that the user reset the device.
1.3.6.1.4.1.164.6.1.0.87NotificationfaultPropagationcurrentThis trap indicates that an interface/port/card received fault propagation.
1.3.6.1.4.1.164.6.1.0.90NotificationsystemResourceOverflowcurrentThis notification is sent when a system resource overflows.
1.3.6.1.4.1.164.6.1.0.91NotificationsystemRemoteTerminalStartedcurrentThis notification is sent when remote terminal to a virtual engine starts.
1.3.6.1.4.1.164.6.1.0.92NotificationsystemRemoteTerminalEndedcurrentThis notification is sent when remote terminal to a virtual engine is terminated, either by a user or by an inactivity timeout.
1.3.6.1.4.1.164.6.1.0.93NotificationsystemNtpAccuracyOutOfLimitcurrentThis alarm notification is sent when NTP client accuracy becomes 'out of limit'.
1.3.6.1.4.1.164.6.1.0.95NotificationsystemSummerTimeStarteddeprecatedThis event is sent when the agent enters summer time. The event was obsoleted by systemTimeChanged.
1.3.6.1.4.1.164.6.1.0.96NotificationsystemSummerTimeEndeddeprecatedThis event is sent when the agent exits summer time. The event was obsoleted by systemTimeChanged.
1.3.6.1.4.1.164.6.1.0.97NotificationsystemFileOverflowcurrentThis event is sent if a file reaches its maximum size. The file name can be inferred from the indices of the fileSystemValidIndication attached variable.
1.3.6.1.4.1.164.6.1.0.98NotificationsystemTimeChangedcurrentThis event is sent when the system local time changes.
1.3.6.1.4.1.164.6.1.0.99NotificationsystemTimeSourceChangedcurrentThis event is sent when the source providing time for the system changes.
1.3.6.1.4.1.164.6.1.0.100NotificationsystemSerialPortDisabledcurrentThis trap is sent if the serial port is disabled.
1.3.6.1.4.1.164.6.1.0.101NotificationsystemSerialPortEnabledcurrentThis trap is sent if the serial port is enabled.
1.3.6.1.4.1.164.6.1.0.102NotificationsystemFactoryDefaultButtonPushedcurrentThis trap is sent if the factory default button has been pressed for five seconds, triggering the factory-default command.
1.3.6.1.4.1.164.6.1.1NoderadSysTR
1.3.6.1.4.1.164.6.1.1.1NoderadRADring
1.3.6.1.4.1.164.6.1.1.2NoderadTMA
1.3.6.1.4.1.164.6.1.1.3NoderadRingMonitor
1.3.6.1.4.1.164.6.1.2NoderadSysFddi
1.3.6.1.4.1.164.6.1.2.1NoderadFDX100
1.3.6.1.4.1.164.6.1.3NoderadSysWan
1.3.6.1.4.1.164.6.1.3.0IdentityradSysWanEventscurrentThe events for RAD Wan products.
1.3.6.1.4.1.164.6.1.3.1NoderadMP2100
1.3.6.1.4.1.164.6.1.3.2NoderadMP2104
1.3.6.1.4.1.164.6.1.3.3NoderadMP2100B
1.3.6.1.4.1.164.6.1.3.4NoderadMP2100F
1.3.6.1.4.1.164.6.1.3.5NoderadMP2100H
1.3.6.1.4.1.164.6.1.3.6NoderadMP2104H
1.3.6.1.4.1.164.6.1.3.7NoderadMP2200B
1.3.6.1.4.1.164.6.1.3.8NoderadMP2200F
1.3.6.1.4.1.164.6.1.3.9NoderadMX3000
1.3.6.1.4.1.164.6.1.3.10NoderadMX3004
1.3.6.1.4.1.164.6.1.3.11NoderadMX30
1.3.6.1.4.1.164.6.1.3.12NoderadMX300
1.3.6.1.4.1.164.6.1.3.13NoderadVOIP
1.3.6.1.4.1.164.6.1.3.15NoderadKM2100
1.3.6.1.4.1.164.6.1.3.16NoderadKM2104
1.3.6.1.4.1.164.6.1.3.20NoderadDXC30
1.3.6.1.4.1.164.6.1.3.21NoderadDXC10A
1.3.6.1.4.1.164.6.1.3.22NoderadDXC8R
1.3.6.1.4.1.164.6.1.3.23NoderadDXC30E
1.3.6.1.4.1.164.6.1.3.24NoderadDXC3000
1.3.6.1.4.1.164.6.1.3.25NoderadDXC8RNew
1.3.6.1.4.1.164.6.1.3.26NoderadFcdT1LC
1.3.6.1.4.1.164.6.1.3.27NoderadFcdE1LC
1.3.6.1.4.1.164.6.1.3.28NoderadFcdT1L
1.3.6.1.4.1.164.6.1.3.29NoderadFcdE1L
1.3.6.1.4.1.164.6.1.3.30NoderadFcdT1
1.3.6.1.4.1.164.6.1.3.31NoderadFcdE1
1.3.6.1.4.1.164.6.1.3.32NoderadFcdE1I
1.3.6.1.4.1.164.6.1.3.33NoderadFcdT1M
1.3.6.1.4.1.164.6.1.3.34NoderadFcdE1M
1.3.6.1.4.1.164.6.1.3.35NoderadFcdIP
1.3.6.1.4.1.164.6.1.3.36NoderadFcdT1A
1.3.6.1.4.1.164.6.1.3.37NoderadFcdE1A
1.3.6.1.4.1.164.6.1.3.38NoderadFcdW
1.3.6.1.4.1.164.6.1.3.39NoderadFcdSTM
1.3.6.1.4.1.164.6.1.3.40NoderadHtuE1Sa
1.3.6.1.4.1.164.6.1.3.41NoderadHtuE1
1.3.6.1.4.1.164.6.1.3.42NoderadHtu2Sa
1.3.6.1.4.1.164.6.1.3.43NoderadHtu2
1.3.6.1.4.1.164.6.1.3.44NoderadAsmi450R768Sa
1.3.6.1.4.1.164.6.1.3.45NoderadAsmi450R768
1.3.6.1.4.1.164.6.1.3.46NoderadAsmi450R1152Sa
1.3.6.1.4.1.164.6.1.3.47NoderadAsmi450R1152
1.3.6.1.4.1.164.6.1.3.48NoderadLrs12F
1.3.6.1.4.1.164.6.1.3.49NoderadLrs12B
1.3.6.1.4.1.164.6.1.3.50NoderadLrs52
1.3.6.1.4.1.164.6.1.3.51NoderadHcdE1Sa
1.3.6.1.4.1.164.6.1.3.52NoderadHcdE1
1.3.6.1.4.1.164.6.1.3.53NoderadHtuT1Sa
1.3.6.1.4.1.164.6.1.3.54NoderadHtuT1
1.3.6.1.4.1.164.6.1.3.55NoderadOptimux4E1
1.3.6.1.4.1.164.6.1.3.56NoderadOptimux4T1
1.3.6.1.4.1.164.6.1.3.57NoderadOptimuxXLE1
1.3.6.1.4.1.164.6.1.3.58NoderadOptimuxXLT1
1.3.6.1.4.1.164.6.1.3.59NoderadOptimuxXL16E1
1.3.6.1.4.1.164.6.1.3.60NoderadImx64
1.3.6.1.4.1.164.6.1.3.61NoderadImx6L
1.3.6.1.4.1.164.6.1.3.62NoderadImx2
1.3.6.1.4.1.164.6.1.3.63NoderadImx4T1
1.3.6.1.4.1.164.6.1.3.64NoderadImx4E1
1.3.6.1.4.1.164.6.1.3.65NoderadImx2T1E1
1.3.6.1.4.1.164.6.1.3.66NoderadImxi4
1.3.6.1.4.1.164.6.1.3.67NoderadOptimux155
1.3.6.1.4.1.164.6.1.3.68NoderadOptimux4T1L
1.3.6.1.4.1.164.6.1.3.69NoderadOptimux4E1L
1.3.6.1.4.1.164.6.1.3.70NoderadHtuE1SaV2
1.3.6.1.4.1.164.6.1.3.71NoderadHtuE1V2
1.3.6.1.4.1.164.6.1.3.72NoderadFomiE3
1.3.6.1.4.1.164.6.1.3.73NoderadFomiT3
1.3.6.1.4.1.164.6.1.3.74NoderadOpt4E1C
1.3.6.1.4.1.164.6.1.3.75NoderadOpt4T1C
1.3.6.1.4.1.164.6.1.3.76NoderadPrbiE3
1.3.6.1.4.1.164.6.1.3.77NoderadPrbiT3
1.3.6.1.4.1.164.6.1.3.78NoderadHcd4Sa
1.3.6.1.4.1.164.6.1.3.79NoderadOptimuxT3
1.3.6.1.4.1.164.6.1.3.80NoderadFRmon
1.3.6.1.4.1.164.6.1.3.81NoderadIpMux4
1.3.6.1.4.1.164.6.1.3.82NoderadIpMux1
1.3.6.1.4.1.164.6.1.3.83NoderadIpMux16
1.3.6.1.4.1.164.6.1.3.84NoderadIpMux1E
1.3.6.1.4.1.164.6.1.3.85NoderadVmux2100
1.3.6.1.4.1.164.6.1.3.86NoderadMP104
1.3.6.1.4.1.164.6.1.3.87NoderadMP204
1.3.6.1.4.1.164.6.1.3.88NoderadVmux110
1.3.6.1.4.1.164.6.1.3.90NoderadFcd155
1.3.6.1.4.1.164.6.1.3.91NoderadIpMux8
1.3.6.1.4.1.164.6.1.3.92NoderadOptimux155DS3
1.3.6.1.4.1.164.6.1.3.93NoderadOptimuxT3L
1.3.6.1.4.1.164.6.1.3.94NoderadGmux2000
1.3.6.1.4.1.164.6.1.3.95NoderadOp16E1L
1.3.6.1.4.1.164.6.1.3.96NoderadOp16E1LS
1.3.6.1.4.1.164.6.1.3.97NoderadPRBm20
1.3.6.1.4.1.164.6.1.3.98NoderadPRBm22
1.3.6.1.4.1.164.6.1.3.99NoderadAsmi52A
1.3.6.1.4.1.164.6.1.3.100NoderadOpXLE1
1.3.6.1.4.1.164.6.1.3.101NoderadOpXLT1
1.3.6.1.4.1.164.6.1.3.102NoderadOpXL16E1
1.3.6.1.4.1.164.6.1.3.103NoderadOp4E1
1.3.6.1.4.1.164.6.1.3.104NoderadOp4T1
1.3.6.1.4.1.164.6.1.3.105NoderadDxc4
1.3.6.1.4.1.164.6.1.3.106NoderadIpMux11
1.3.6.1.4.1.164.6.1.3.107NoderadIpMux14
1.3.6.1.4.1.164.6.1.3.108NoderadOp1550
1.3.6.1.4.1.164.6.1.3.110NoderadFdsl101
1.3.6.1.4.1.164.6.1.3.111NoderadFdsl201
1.3.6.1.4.1.164.6.1.3.112NoderadVmux120
1.3.6.1.4.1.164.6.1.3.113NoderadVmux2200
1.3.6.1.4.1.164.6.1.3.114NoderadVmux400
1.3.6.1.4.1.164.6.1.3.115NoderadIpMux116
1.3.6.1.4.1.164.6.1.3.116NoderadOp4E1LNew
1.3.6.1.4.1.164.6.1.3.117NoderadOp4T1LNew
1.3.6.1.4.1.164.6.1.3.118NoderadFcd155E
1.3.6.1.4.1.164.6.1.3.119NoderadFcd155ES
1.3.6.1.4.1.164.6.1.3.120NoderadMP4100
1.3.6.1.4.1.164.6.1.3.121NoderadAsmi52L
1.3.6.1.4.1.164.6.1.3.122NoderadVmux210
1.3.6.1.4.1.164.6.1.3.123NoderadOp34E1
1.3.6.1.4.1.164.6.1.3.124NoderadVmux312
1.3.6.1.4.1.164.6.1.3.125NoderadVmux404
1.3.6.1.4.1.164.6.1.3.126NoderadVmux420
1.3.6.1.4.1.164.6.1.3.127NoderadIpMux12
1.3.6.1.4.1.164.6.1.3.128NoderadOptimux4E1V3dot5
1.3.6.1.4.1.164.6.1.3.129NoderadOptimux4E1Mar06
1.3.6.1.4.1.164.6.1.3.130NoderadFcd155EwAPS
1.3.6.1.4.1.164.6.1.3.131NoderadOptimux4T1Mar06
1.3.6.1.4.1.164.6.1.3.132NoderadFcd155EwAPS2pdh
1.3.6.1.4.1.164.6.1.3.133NoderadVmux320
1.3.6.1.4.1.164.6.1.3.134NoderadMP2100VoIP
1.3.6.1.4.1.164.6.1.3.135NoderadMP2104VoIP
1.3.6.1.4.1.164.6.1.3.136NoderadIpMux24
1.3.6.1.4.1.164.6.1.3.137NoderadOp4E1NG1
1.3.6.1.4.1.164.6.1.3.138NoderadOp4T1NG1
1.3.6.1.4.1.164.6.1.3.139NoderadOp25
1.3.6.1.4.1.164.6.1.3.140NoderadAsmi54
1.3.6.1.4.1.164.6.1.3.141NoderadVmux314
1.3.6.1.4.1.164.6.1.3.142NoderadFcd622
1.3.6.1.4.1.164.6.1.3.143NoderadLrs22
1.3.6.1.4.1.164.6.1.3.144NoderadUNT20E1
1.3.6.1.4.1.164.6.1.3.145NoderadIpMux2L
1.3.6.1.4.1.164.6.1.3.146NoderadFcdE1E
1.3.6.1.4.1.164.6.1.3.147NoderadIpMux216
1.3.6.1.4.1.164.6.1.3.148NoderadLrs102
1.3.6.1.4.1.164.6.1.3.149NoderadGmux2004
1.3.6.1.4.1.164.6.1.3.150NoderadLrs102unbal
1.3.6.1.4.1.164.6.1.3.151NoderadLrs16
1.3.6.1.4.1.164.6.1.3.152NoderadVmux405
1.3.6.1.4.1.164.6.1.3.153NoderadVmux425
1.3.6.1.4.1.164.6.1.3.154NoderadMiniCVS
1.3.6.1.4.1.164.6.1.3.155NoderadIpMux155
1.3.6.1.4.1.164.6.1.4NoderadSysBRG
1.3.6.1.4.1.164.6.1.4.1NoderadTRE1
1.3.6.1.4.1.164.6.1.4.2NoderadTRE1D
1.3.6.1.4.1.164.6.1.4.3NoderadTRE8
1.3.6.1.4.1.164.6.1.4.4NoderadTRE8D
1.3.6.1.4.1.164.6.1.4.5NoderadMBE1
1.3.6.1.4.1.164.6.1.4.6NoderadMBE1D
1.3.6.1.4.1.164.6.1.4.7NoderadMBE8
1.3.6.1.4.1.164.6.1.4.8NoderadMBE8D
1.3.6.1.4.1.164.6.1.4.9NoderadMLBT
1.3.6.1.4.1.164.6.1.4.10NoderadFEB4DAS
1.3.6.1.4.1.164.6.1.4.11NoderadTrimBrg10
1.3.6.1.4.1.164.6.1.4.12NoderadTrimBrg16
1.3.6.1.4.1.164.6.1.4.13NoderadRRTRE8
1.3.6.1.4.1.164.6.1.4.14NoderadRRTRE8D
1.3.6.1.4.1.164.6.1.4.15NoderadRRMLBT
1.3.6.1.4.1.164.6.1.4.16NoderadRRMLBTF
1.3.6.1.4.1.164.6.1.4.17NoderadRRTRE1D
1.3.6.1.4.1.164.6.1.4.18NoderadTRERAS
1.3.6.1.4.1.164.6.1.4.19NoderadTRERASa
1.3.6.1.4.1.164.6.1.4.20NoderadMBERAS
1.3.6.1.4.1.164.6.1.4.21NoderadMBERASa
1.3.6.1.4.1.164.6.1.4.22NoderadFEB4FDX
1.3.6.1.4.1.164.6.1.4.23NoderadFEB4SAS
1.3.6.1.4.1.164.6.1.4.24NoderadRRFTBDAS
1.3.6.1.4.1.164.6.1.4.25NoderadRRFTBSAS
1.3.6.1.4.1.164.6.1.4.26NoderadFTBDAS
1.3.6.1.4.1.164.6.1.4.27NoderadFTBSAS
1.3.6.1.4.1.164.6.1.4.28NoderadFastWay100
1.3.6.1.4.1.164.6.1.5NoderadSysCnvrtr
1.3.6.1.4.1.164.6.1.5.1NoderadSTC1
1.3.6.1.4.1.164.6.1.5.3NoderadSTC2
1.3.6.1.4.1.164.6.1.5.4NoderadSTC1UDP
1.3.6.1.4.1.164.6.1.5.6NoderadSTC2UDP
1.3.6.1.4.1.164.6.1.5.10NoderadFTC1
1.3.6.1.4.1.164.6.1.5.12NoderadFTC2
1.3.6.1.4.1.164.6.1.5.13NoderadFTC1UDP
1.3.6.1.4.1.164.6.1.5.15NoderadFTC2UDP
1.3.6.1.4.1.164.6.1.5.20NoderadSEC1
1.3.6.1.4.1.164.6.1.5.22NoderadSEC2
1.3.6.1.4.1.164.6.1.5.23NoderadSEC1UDP
1.3.6.1.4.1.164.6.1.5.25NoderadSEC2UDP
1.3.6.1.4.1.164.6.1.5.30NoderadFEC1
1.3.6.1.4.1.164.6.1.5.32NoderadFEC2
1.3.6.1.4.1.164.6.1.5.33NoderadFEC1UDP
1.3.6.1.4.1.164.6.1.5.35NoderadFEC2UDP
1.3.6.1.4.1.164.6.1.5.36NoderadRIC155
1.3.6.1.4.1.164.6.1.5.37NoderadRICE1
1.3.6.1.4.1.164.6.1.5.38NoderadETX102
1.3.6.1.4.1.164.6.1.5.39NoderadRIC155GE
1.3.6.1.4.1.164.6.1.5.40NoderadRiciT3
1.3.6.1.4.1.164.6.1.5.41NoderadRiciE3
1.3.6.1.4.1.164.6.1.5.42NoderadRiciT1
1.3.6.1.4.1.164.6.1.5.43NoderadETX202
1.3.6.1.4.1.164.6.1.5.44NoderadETX105
1.3.6.1.4.1.164.6.1.5.45NoderadETX205
1.3.6.1.4.1.164.6.1.5.46NoderadRiciSE
1.3.6.1.4.1.164.6.1.5.47NoderadRIC622GE
1.3.6.1.4.1.164.6.1.5.48NoderadSPH
1.3.6.1.4.1.164.6.1.5.49NoderadMiricE1T1
1.3.6.1.4.1.164.6.1.5.50NoderadMiricE3T3
1.3.6.1.4.1.164.6.1.5.51NoderadSPH4
1.3.6.1.4.1.164.6.1.6NoderadEthAccess
1.3.6.1.4.1.164.6.1.6.1NoderadETX510
1.3.6.1.4.1.164.6.1.6.2NoderadEGate100
1.3.6.1.4.1.164.6.1.6.3NoderadEGate20
1.3.6.1.4.1.164.6.1.6.4NoderadRici8E1
1.3.6.1.4.1.164.6.1.6.5NoderadRici8T1
1.3.6.1.4.1.164.6.1.6.6NoderadRici4E1
1.3.6.1.4.1.164.6.1.6.7NoderadRici4T1
1.3.6.1.4.1.164.6.1.6.8NoderadIMXI4
1.3.6.1.4.1.164.6.1.6.9NoderadETX550
1.3.6.1.4.1.164.6.1.6.10NoderadRici16
1.3.6.1.4.1.164.6.1.6.11NoderadETX102A
1.3.6.1.4.1.164.6.1.6.12NoderadETX202A
1.3.6.1.4.1.164.6.1.6.13NoderadETX201A
1.3.6.1.4.1.164.6.1.6.14NoderadETX201
1.3.6.1.4.1.164.6.1.6.15NoderadUNT20Ric
1.3.6.1.4.1.164.6.1.6.16NoderadRici4E1L
1.3.6.1.4.1.164.6.1.6.17NoderadRici8E1L
1.3.6.1.4.1.164.6.1.6.18NoderadRici155GE
1.3.6.1.4.1.164.6.1.6.19NoderadRici622GE
1.3.6.1.4.1.164.6.1.6.20NoderadETX208
1.3.6.1.4.1.164.6.1.6.21NoderadETX202AW
1.3.6.1.4.1.164.6.1.6.22NoderadETX102H
1.3.6.1.4.1.164.6.1.6.23NoderadETX202H
1.3.6.1.4.1.164.6.1.6.30NoderadETX205A
1.3.6.1.4.1.164.6.1.6.32NoderadETX220A
1.3.6.1.4.1.164.6.1.6.33NoderadETX203AM
1.3.6.1.4.1.164.6.1.6.34NoderadETX203AX
1.3.6.1.4.1.164.6.1.6.40NoderadETX2i
1.3.6.1.4.1.164.6.1.6.43NoderadETX2iHalf19Inch
1.3.6.1.4.1.164.6.1.6.44NoderadETX2iNebs
1.3.6.1.4.1.164.6.1.6.45NoderadETX2iVENebs
1.3.6.1.4.1.164.6.1.6.46NoderadETX203AXH
1.3.6.1.4.1.164.6.1.7NoderadSysStkHub
1.3.6.1.4.1.164.6.1.7.1NoderadRBHE
1.3.6.1.4.1.164.6.1.7.1.0IdentityradRBHEEventscurrentThe events for RAD Stackable products.
1.3.6.1.4.1.164.6.1.7.2NoderadRBHT
1.3.6.1.4.1.164.6.1.7.2.0IdentityradRBHTEventscurrentThe events for RAD Stackable products.
1.3.6.1.4.1.164.6.1.7.3NoderadETS4fddiDAS
1.3.6.1.4.1.164.6.1.7.4NoderadETS4fddiSAS
1.3.6.1.4.1.164.6.1.7.5NoderadSAHEMX
1.3.6.1.4.1.164.6.1.7.6NoderadSAHTM
1.3.6.1.4.1.164.6.1.7.7NoderadETS4
1.3.6.1.4.1.164.6.1.7.8NoderadSAHEMU
1.3.6.1.4.1.164.6.1.7.9Nodeunknown
1.3.6.1.4.1.164.6.1.7.10NoderadSAH16Eint
1.3.6.1.4.1.164.6.1.7.11NoderadSAH16Tint
1.3.6.1.4.1.164.6.1.7.12NoderadSAH16Eext
1.3.6.1.4.1.164.6.1.7.13NoderadSAH16Text
1.3.6.1.4.1.164.6.1.8NoderadSysPS
1.3.6.1.4.1.164.6.1.8.0IdentityradSysPSEventscurrentThe events for RAD Packet Switch (PS) products.
1.3.6.1.4.1.164.6.1.8.1NoderadSPS2
1.3.6.1.4.1.164.6.1.8.2NoderadSPS3
1.3.6.1.4.1.164.6.1.8.3NoderadSPS6
1.3.6.1.4.1.164.6.1.8.4NoderadSPS9
1.3.6.1.4.1.164.6.1.8.5NoderadSPS12
1.3.6.1.4.1.164.6.1.8.6NoderadAPD2
1.3.6.1.4.1.164.6.1.8.7NoderadAPD8
1.3.6.1.4.1.164.6.1.8.8NoderadAPS8
1.3.6.1.4.1.164.6.1.8.9NoderadAPS16
1.3.6.1.4.1.164.6.1.8.10NoderadAPS24
1.3.6.1.4.1.164.6.1.8.11NoderadSPS3S
1.3.6.1.4.1.164.6.1.8.12NoderadFPS8
1.3.6.1.4.1.164.6.1.8.13NoderadFPS12
1.3.6.1.4.1.164.6.1.8.14NoderadSPS3ScSL
1.3.6.1.4.1.164.6.1.8.15NoderadSPS3Sc2S
1.3.6.1.4.1.164.6.1.8.16NoderadFPS8c
1.3.6.1.4.1.164.6.1.8.17NoderadFPS4
1.3.6.1.4.1.164.6.1.8.18NoderadSPS4
1.3.6.1.4.1.164.6.1.9NoderadSysEth
1.3.6.1.4.1.164.6.1.9.1NoderadEP8T
1.3.6.1.4.1.164.6.1.9.2NoderadEP4TAUI
1.3.6.1.4.1.164.6.1.9.3NoderadEP4T2FL
1.3.6.1.4.1.164.6.1.9.4NoderadEP4TFL
1.3.6.1.4.1.164.6.1.9.5NoderadEP4FL
1.3.6.1.4.1.164.6.1.9.7NoderadEPR8T
1.3.6.1.4.1.164.6.1.9.8NoderadEPR4TAUI
1.3.6.1.4.1.164.6.1.9.9NoderadEPR4T2FL
1.3.6.1.4.1.164.6.1.9.10NoderadEPR4TFL
1.3.6.1.4.1.164.6.1.9.11NoderadEPR4FL
1.3.6.1.4.1.164.6.1.11NoderadSysRtr
1.3.6.1.4.1.164.6.1.11.0IdentityradSysRtrEventscurrentThe events for RAD Router products.
1.3.6.1.4.1.164.6.1.11.1NoderadRTED
1.3.6.1.4.1.164.6.1.11.2NoderadRTEM
1.3.6.1.4.1.164.6.1.11.3NoderadRTEC
1.3.6.1.4.1.164.6.1.11.4NoderadWebRanger
1.3.6.1.4.1.164.6.1.11.5NoderadTinyRouter
1.3.6.1.4.1.164.6.1.11.6NoderadLA240
1.3.6.1.4.1.164.6.1.11.7NoderadSuperLan
1.3.6.1.4.1.164.6.1.11.8NoderadLA240I
1.3.6.1.4.1.164.6.1.11.9NoderadFcdIsdn
1.3.6.1.4.1.164.6.1.11.10NoderadEFcdIp
1.3.6.1.4.1.164.6.1.11.11NoderadFcdIpD
1.3.6.1.4.1.164.6.1.11.12NoderadFcdIpM
1.3.6.1.4.1.164.6.1.11.13NoderadFcdIpL
1.3.6.1.4.1.164.6.1.12NoderadSysAtm
1.3.6.1.4.1.164.6.1.12.0IdentityradSysAtmEventscurrentThe events for RAD ATM products.
1.3.6.1.4.1.164.6.1.12.1NoderadStarSwitch
1.3.6.1.4.1.164.6.1.12.1.1NoderadStarSwitchATM25
1.3.6.1.4.1.164.6.1.12.1.2NoderadStarSwitchATM25L
1.3.6.1.4.1.164.6.1.12.1.3NoderadStarSwitchATM155
1.3.6.1.4.1.164.6.1.12.2NoderadAtmCsuDsu
1.3.6.1.4.1.164.6.1.12.2.1NoderadAmcdE1
1.3.6.1.4.1.164.6.1.12.2.2NoderadAmcdT1
1.3.6.1.4.1.164.6.1.12.2.3NoderadAce20E
1.3.6.1.4.1.164.6.1.12.2.4NoderadAce20T
1.3.6.1.4.1.164.6.1.12.2.5NoderadAce2005
1.3.6.1.4.1.164.6.1.12.2.6NoderadAce2002
1.3.6.1.4.1.164.6.1.12.2.7NoderadAce2002E
1.3.6.1.4.1.164.6.1.12.2.8NoderadAce2E
1.3.6.1.4.1.164.6.1.12.2.9NoderadAce2T
1.3.6.1.4.1.164.6.1.12.2.10NoderadMlAtmE1
1.3.6.1.4.1.164.6.1.12.2.11NoderadMlAtmT1
1.3.6.1.4.1.164.6.1.12.2.12NoderadAmc102
1.3.6.1.4.1.164.6.1.12.2.13NoderadAmc102c
1.3.6.1.4.1.164.6.1.12.2.14NoderadAce202
1.3.6.1.4.1.164.6.1.12.3NoderadAce
1.3.6.1.4.1.164.6.1.12.3.1NoderadAce101
1.3.6.1.4.1.164.6.1.12.3.2NoderadAce102
1.3.6.1.4.1.164.6.1.12.3.3NoderadAce50
1.3.6.1.4.1.164.6.1.12.3.4NoderadAce52
1.3.6.1.4.1.164.6.1.12.3.5NoderadAce52L
1.3.6.1.4.1.164.6.1.12.3.7NoderadAce201
1.3.6.1.4.1.164.6.1.12.3.8NoderadAce3200
1.3.6.1.4.1.164.6.1.12.3.9NoderadAce3100
1.3.6.1.4.1.164.6.1.12.3.10NoderadAce3400
1.3.6.1.4.1.164.6.1.12.3.11NoderadAce3402
1.3.6.1.4.1.164.6.1.12.3.12NoderadAce3100PSN
1.3.6.1.4.1.164.6.1.12.3.13NoderadAce3200PSN
1.3.6.1.4.1.164.6.1.12.3.14NoderadAce3400PSN
1.3.6.1.4.1.164.6.1.12.3.15NoderadAce3402PSN
1.3.6.1.4.1.164.6.1.12.3.16NoderadAce3600
1.3.6.1.4.1.164.6.1.12.3.17NoderadAce3205
1.3.6.1.4.1.164.6.1.12.3.18NoderadAce3105
1.3.6.1.4.1.164.6.1.12.3.19NoderadAce3220
1.3.6.1.4.1.164.6.1.13NoderadSysLA
1.3.6.1.4.1.164.6.1.13.1NoderadLA140
1.3.6.1.4.1.164.6.1.13.2NoderadLA110
1.3.6.1.4.1.164.6.1.13.3NoderadLA104
1.3.6.1.4.1.164.6.1.13.4NoderadLA130
1.3.6.1.4.1.164.6.1.13.5NoderadLA210
1.3.6.1.4.1.164.6.1.14NoderadSecurity
1.3.6.1.4.1.164.6.1.15NoderadTest
1.3.6.1.4.1.164.6.1.16NoderadTrace
1.3.6.1.4.1.164.6.1.16.1NoderadAgnTrace
1.3.6.1.4.1.164.6.1.16.1.1TableresetInformationTablenot-accessiblecurrentThis table traces the agent fatal error.
1.3.6.1.4.1.164.6.1.16.1.1.1RowresetInformationEntrynot-accessiblecurrentThis table has a single row entry and provides Information related to the last reboot.
1.3.6.1.4.1.164.6.1.16.1.1.1.1ColumnresetInformationIdnot-accessiblecurrentresetInformationId =1
1.3.6.1.4.1.164.6.1.16.1.1.1.2ColumnresetInformationLastResetread-onlycurrentType of last reset.
1.3.6.1.4.1.164.6.1.16.1.1.1.3ColumnresetInformationFileNameread-onlycurrentIf the filename is empty then the object is not applicable
1.3.6.1.4.1.164.6.1.16.1.1.1.4ColumnresetInformationLineNumberread-onlycurrentif the line number value is zero then this object is not applicable
1.3.6.1.4.1.164.6.1.16.1.1.1.5ColumnresetInformationPCread-onlycurrentif the Program Counter value is zero then this object is not applicable
1.3.6.1.4.1.164.6.1.16.1.1.1.6ColumnresetInformationExceptionCauseread-onlycurrentif the Exception Cause value is zero then this object is not applicable
1.3.6.1.4.1.164.6.1.16.1.1.1.7ColumnresetInformationReasonread-onlycurrentReason for the last reset.
1.3.6.1.4.1.164.6.1.17NoderadZeroTouch
1.3.6.1.4.1.164.6.2Nodeagnt
1.3.6.1.4.1.164.6.2.1ScalaragnHwVersionread-writecurrentASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update the version upon request when …
1.3.6.1.4.1.164.6.2.2ScalaragnTrapMaskread-writecurrentThe value of this attribute determines the type of traps the agent should mask and not send to the management console. The value is differently determined for …
1.3.6.1.4.1.164.6.2.3ScalaragnTrapValueread-onlydeprecatedThe value of the trap decoded in internal RAD format. Full description is given in the Trap definition file
1.3.6.1.4.1.164.6.2.4ScalaragnChangeCntread-onlycurrentThe number of changes in system configuration that were reported to the manager since last cold start
1.3.6.1.4.1.164.6.2.5ScalaragnSpecificread-onlycurrentObject identifier of entity containing additional information regarding this instance.
1.3.6.1.4.1.164.6.2.6ScalaragnConfigMsgread-onlycurrentFull configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3, this object describes agent's …
1.3.6.1.4.1.164.6.2.7TablemngTrapIpTablenot-accessiblecurrentThis table indicates the destination address of the traps. Internally it will be limited to ten addresses.
1.3.6.1.4.1.164.6.2.7.1RowmngEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.7.1.1ColumnmngIDread-onlycurrentThis value indicates an index of a specific IP address
1.3.6.1.4.1.164.6.2.7.1.2ColumnmngIPread-writecurrentThis value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.
1.3.6.1.4.1.164.6.2.7.1.3ColumnmngIPMaskread-writedeprecatedThis value indicates the mask of the destination addresses of the traps.
1.3.6.1.4.1.164.6.2.7.1.4ColumnmngTrapMaskread-writecurrentThe value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different prod…
1.3.6.1.4.1.164.6.2.7.1.5ColumnmngAlarmTrapMaskread-writecurrentThe value of this object determines the alarm traps that the agent should mask (not send to this manager). The value is an Octet String, where each bit is assi…
1.3.6.1.4.1.164.6.2.7.1.6ColumnmngSnmpTrapUdpPortread-writecurrentThis variable enables to set the UDP port (socket) used for SNMP traps.
1.3.6.1.4.1.164.6.2.8ScalaragnIndicationread-onlycurrentAttribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attribute will be according to the co…
1.3.6.1.4.1.164.6.2.9ScalaragnMonitorModeCmdread-writecurrentSetting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode
1.3.6.1.4.1.164.6.2.10ScalaragnLedread-onlycurrentThis entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left) will specify the status : (00=N…
1.3.6.1.4.1.164.6.2.11TabletrapTablenot-accessiblecurrentThis table may include the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps are not retrieved in proper …
1.3.6.1.4.1.164.6.2.11.1RowtrapEntrynot-accessiblecurrentAn entry in trapTable.
1.3.6.1.4.1.164.6.2.11.1.1ColumntrapIDread-onlycurrentThis object indicates an index of a specific trap. Can be used also for any trap, while trapVal is used as 'accessible-for-notify' or trapNumeric is used.
1.3.6.1.4.1.164.6.2.11.1.2ColumntrapValread-onlycurrentThis object is the actual ASCII description of the trap. It can be used also as attached variable of traps, in order to detail in explicit ASCII text, data of …
1.3.6.1.4.1.164.6.2.11.1.3ColumntrapTimeSinceOccurrenceread-onlycurrentThis object indicates the amount of time passed since the occurrence of the event that triggered this trap.
1.3.6.1.4.1.164.6.2.11.1.4ColumntrapNumericaccessible-for-notifycurrentThis object is a numeric general parameter, that can be attached to any trap. Values can be positive or negative.
1.3.6.1.4.1.164.6.2.12NodefileTransfer
1.3.6.1.4.1.164.6.2.12.1ScalarfileServerIPread-writecurrentThe IP address of the server from which the file is loaded
1.3.6.1.4.1.164.6.2.12.2ScalarfileNameread-writecurrentThe name of the file to be loaded. For protection, read returns NULL.
1.3.6.1.4.1.164.6.2.12.3ScalarfileTransCmdread-writecurrentThe command to be executed on fileName at fileServerIP.
1.3.6.1.4.1.164.6.2.12.4ScalartftpRetryTimeOutread-writecurrentGeneral Retransmission time-out value (seconds)
1.3.6.1.4.1.164.6.2.12.5ScalartftpTotalTimeOutread-writecurrentTotal Retransmission time-out value (seconds)
1.3.6.1.4.1.164.6.2.12.6ScalartftpStatusread-writecurrentStatus of tftp session. When a session ended with success, the tftpStatus should be endedOk(6). Before restarting a tftp session, the NMS should set the tftpSt…
1.3.6.1.4.1.164.6.2.12.7ScalartftpErrorread-onlycurrentThe MSB represents the standard error code. The LSB represents the private error code. 0x0000 is No Error 0x0100 is File Not Found 0x0200 is Access violation 0…
1.3.6.1.4.1.164.6.2.12.8ScalarfileTransferToSubSystemsread-writecurrentThis object represents the sub-systems the fileTransCmd refers to. It should be used when a system is divided to sub-systems and each sub-system (or part of th…
1.3.6.1.4.1.164.6.2.12.9ScalarfileNameWithinProductread-writecurrentThe file name used by the product within the product file system.
1.3.6.1.4.1.164.6.2.12.10TableintSwdlTablenot-accessiblecurrentThis parameters table is for internal Software down load. It also includes data about all files contained in the Object from which down-load is performed.
1.3.6.1.4.1.164.6.2.12.10.1RowintSwdlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.12.10.1.1ColumnintSwdlObjIdxread-onlycurrentThe index of the object from which down-load is performed.
1.3.6.1.4.1.164.6.2.12.10.1.2ColumnintSwdlFileIdxread-onlycurrentThe index of the files included in intSwdlObjIdx. One of these files can be selected to be internally downloaded.
1.3.6.1.4.1.164.6.2.12.10.1.3ColumnintSwdlFileNameread-onlycurrentThe name of the file.
1.3.6.1.4.1.164.6.2.12.10.1.4ColumnintSwdlFileSwVerread-onlycurrentThe software version of the file.
1.3.6.1.4.1.164.6.2.12.10.1.5ColumnintSwdlSwDateread-onlycurrentThe software version date of the file.
1.3.6.1.4.1.164.6.2.12.10.1.6ColumnintSwdlSizeread-onlycurrentThe size of the file.
1.3.6.1.4.1.164.6.2.12.10.1.7ColumnintSwdlCmdread-writecurrentThe command to down-load a SW file to an object. The Agent will change the value of this MIB object to off(2) automatically, after accepting the command.
1.3.6.1.4.1.164.6.2.12.10.1.8ColumnintSwdlToSubSystemread-writecurrentThis object defines the subsystem for download. Bit='1'- APPLY to respective sub system. Bit='0'- DO NOT APPLY to respective sub system. For more details see p…
1.3.6.1.4.1.164.6.2.12.10.1.9ColumnintSwdlCardTyperead-onlycurrentThis object defines the Card type that this file is relevant for.
1.3.6.1.4.1.164.6.2.12.10.1.10ColumnintSwdlFlashIdxread-onlycurrentThe index of the flash memory this file is stored in (1 or 2) (Example: 1= The file is stored in flash No.1). ASMi52 file will always be stored in Flash No.2 (…
1.3.6.1.4.1.164.6.2.12.11TableswdlStatusTablenot-accessiblecurrentThis parameters table is for software download status. It also includes data about the files down-loaded or attempted to be down-loaded.
1.3.6.1.4.1.164.6.2.12.11.1RowswdlStatusEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.12.11.1.1ColumnswdlStatusTypeIdxread-onlycurrentThe index of the down-load type (e.g. external (1) or internal (2)).
1.3.6.1.4.1.164.6.2.12.11.1.2ColumnswdlStatusIdxread-onlycurrentThe index of the status rows.
1.3.6.1.4.1.164.6.2.12.11.1.3ColumnswdlStatusFileNameread-onlycurrentThe name of the file.
1.3.6.1.4.1.164.6.2.12.11.1.4ColumnswdlStatusSlotread-onlycurrentThe slot of the updated (or attempted to be updated) object.
1.3.6.1.4.1.164.6.2.12.11.1.5ColumnswdlStatusSubSystemread-onlycurrentThe subsystem that updated (or attempted to be updated).
1.3.6.1.4.1.164.6.2.12.11.1.6ColumnswdlStatusStatusread-onlycurrentThe status of the down load process. Value: Fail (2), OK (3), InProcess (4).
1.3.6.1.4.1.164.6.2.12.11.1.7ColumnswdlStatusTimeread-onlycurrentThis MIB parameter indicates the time SW download was finished. The format shuld be YYYY-MM-DD, hh:mm:ss
1.3.6.1.4.1.164.6.2.12.12ScalarclearDwldStatusLogread-writecurrentThis object clears the status log. Value: off(2), external(3), internal(4) The Agent will change the value of this MIB object to off(2) automatically, after ac…
1.3.6.1.4.1.164.6.2.12.13NodeautoFileTransfer
1.3.6.1.4.1.164.6.2.12.13.1TableautoFileTransferTablenot-accessiblecurrentScheduling configuration table for Agent initiated file transfer.
1.3.6.1.4.1.164.6.2.12.13.1.1RowautoFileTransferEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.12.13.1.1.1ColumnautoFileTransferTyperead-onlycurrentThis object defines the type of file to be transferred by agent.
1.3.6.1.4.1.164.6.2.12.13.1.1.2ColumnautoFileTransferServerIpread-writecurrentThis object defines the IP Address of the server to which the file is uploaded.
1.3.6.1.4.1.164.6.2.12.13.1.1.3ColumnautoFileTransferFileNameread-writecurrentThis object defines the name of the file to be uploaded.
1.3.6.1.4.1.164.6.2.12.13.1.1.4ColumnautoFileTransferSchedulingread-writecurrentThis object defines schedule for TFTP Automatic session(s) initiated by Agent, according to the value selected: now - initiate immediate single session. recurr…
1.3.6.1.4.1.164.6.2.12.13.1.1.5ColumnautoFileTransferTimeRecurrenceread-writecurrentThis object defines time reccurence interval, e.g. M can be 'every M days', 'every M hours' etc. Zero is used to indicate there's no time reccurence (0= notApp…
1.3.6.1.4.1.164.6.2.12.13.1.1.6ColumnautoFileTransferOccurrenceRecurrenceread-writecurrentThis object defines Occurrence reccurence interval, e.g N can be in 'every N alarms', 'every N log entries' etc. zero is used to indicate There's no Event Recc…
1.3.6.1.4.1.164.6.2.12.14ScalarfileTransferServerPortread-writecurrentServer Port number used for File Transfer. Applicable for SFTP. Valid values: 0..65535.
1.3.6.1.4.1.164.6.2.12.15ScalarfileTransferProtocolread-writecurrentFile Transfer protocol used.
1.3.6.1.4.1.164.6.2.13ScalarsystemResetread-writecurrentReset action to be performed on the system. - resetConfig (4) - reset to default configuration; in case of existing user default configuration, it will be rese…
1.3.6.1.4.1.164.6.2.14NodesystemTiming
1.3.6.1.4.1.164.6.2.14.1ScalarsystemDateread-writecurrentSystem date.
1.3.6.1.4.1.164.6.2.14.2ScalarsystemTimeread-writecurrentSystem time.
1.3.6.1.4.1.164.6.2.14.3ScalarsystemTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the current error-measurement period. Same for all ports of the device.
1.3.6.1.4.1.164.6.2.14.4NodesystemNtp
1.3.6.1.4.1.164.6.2.14.4.1ScalarsystemNtpModeread-writecurrentThis variable represents the NTP Mode.
1.3.6.1.4.1.164.6.2.14.4.2ScalarsystemNtpGmtread-writecurrentThis variable represents the NTP GMT (Greenwich Mean Time), Possible values range is -12..12. For new devices/versions this variable will be in minutes.
1.3.6.1.4.1.164.6.2.14.4.3ScalarsystemNtpServerAddressTyperead-writecurrentThis variable represents the NTP Server Address Type.
1.3.6.1.4.1.164.6.2.14.4.4ScalarsystemNtpServerAddressread-writecurrentThis variable represents the NTP Server Address.
1.3.6.1.4.1.164.6.2.14.4.5ScalarsystemNtpUpdateIntervalread-writecurrentThis variable represents the NTP Update Interval, measured in seconds. It means, minimum time between two consecutive NTP requests.
1.3.6.1.4.1.164.6.2.14.4.6ScalarsystemNtpCmdread-writecurrentThis variable represents NTP possible commands. After the Agent accepts a command, it will automatically change the value to off(2).
1.3.6.1.4.1.164.6.2.14.4.7ScalarsystemNtpTimeSinceLastPollread-onlycurrentTime in seconds, that passed from last polling of the configured SNTP servers. 0=Not Applicable (when this time is not known).
1.3.6.1.4.1.164.6.2.14.4.8ScalarsystemNtpModeBITSread-writecurrentIf Bit 0 (broadcastClient) is '1', Broadcast Mode is enabled, meaning that the device listens to the NTP broadcast messages and learns timestamps from them. If…
1.3.6.1.4.1.164.6.2.14.4.9ScalarsystemNtpCurrentSourceTyperead-onlycurrentType IP address of the NTP Server currently providing system TOD.
1.3.6.1.4.1.164.6.2.14.4.10ScalarsystemNtpCurrentSourceread-onlycurrentIP Address of the server (or local hardware) providing the current Date and Time of the device. In addition to valid IP address the following special values ar…
1.3.6.1.4.1.164.6.2.14.4.11TablesntpServerTablenot-accessiblecurrentThis table contains parameters for each NTP Server. Entries in the table can be dynamically created. The entries created by user via sntpServerRowStatus, can a…
1.3.6.1.4.1.164.6.2.14.4.11.1RowsntpServerEntrynot-accessiblecurrentAn entry in the NTP Server table.
1.3.6.1.4.1.164.6.2.14.4.11.1.1ColumnsntpServerIDnot-accessiblecurrentThe number (index) of the NTP Server.
1.3.6.1.4.1.164.6.2.14.4.11.1.2ColumnsntpServerRowStatusread-createcurrentThis object enables creation and deletion of entries in the sntpServerTable.
1.3.6.1.4.1.164.6.2.14.4.11.1.3ColumnsntpServerAddressTyperead-createcurrentServer Address type, indicating IPv4(1) or IPv6(2).
1.3.6.1.4.1.164.6.2.14.4.11.1.4ColumnsntpServerAddressread-createcurrentIP Address of the NTP Server.
1.3.6.1.4.1.164.6.2.14.4.11.1.5ColumnsntpServerPortread-createcurrentSource UDP port of the device for sending requests to a configured NTP Server.
1.3.6.1.4.1.164.6.2.14.4.11.1.6ColumnsntpServerPreferenceread-createcurrentThis object marks the Preferred Server. 1 = Preferred (only one Server can have this value) 2 - Not Preferred.
1.3.6.1.4.1.164.6.2.14.4.11.1.7ColumnsntpServerAdminStatusread-createcurrentAdministrative Status of the NTP Server.
1.3.6.1.4.1.164.6.2.14.4.11.1.8ColumnsntpServerTyperead-onlycurrentType of the NTP Server.
1.3.6.1.4.1.164.6.2.14.4.11.1.9ColumnsntpServerLastReceivedTimestampread-onlycurrentLast received Date and Time from the NTP Server, according to UTC Time. 0000 0000 = Not Applicable.
1.3.6.1.4.1.164.6.2.14.4.11.1.10ColumnsntpServerLastReceivedStratumread-onlycurrentLast received Stratum from the NTP Server. 0xFFFFFFFF = Not Applicable.
1.3.6.1.4.1.164.6.2.14.4.11.1.11ColumnsntpServerTimeSinceLastReceivedMessageread-onlycurrentTime passed since last received message from the NTP Server.
1.3.6.1.4.1.164.6.2.14.4.11.1.12ColumnsntpServerSendRequestNowread-createcurrentUpon setting this parameter to 'on', an immediate request should be sent to the specified NTP Server. After sending the request, the value 'off' will be resume…
1.3.6.1.4.1.164.6.2.14.4.12ScalarsystemNtpLockingStatusread-onlycurrentNTP locking status. This object is only relevant when the value of systemNtpUpdateInterval is zero. Otherwise, the value notApplicable(1) is returned.
1.3.6.1.4.1.164.6.2.14.4.13ScalarsystemSummerTimeStateread-onlycurrentWhen the agent is not in summer time this object returns 0. While in summer time it returns the number of minutes the clock has been moved.
1.3.6.1.4.1.164.6.2.14.5TableschedXTablenot-accessiblecurrentAn Augment to the Schedule table (schedTable in DISMAN-SCHEDULE-MIB; RFC-3231).
1.3.6.1.4.1.164.6.2.14.5.1RowschedXEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.14.5.1.1ColumnschedYearread-createcurrentThe year during which the scheduled action should take place.
1.3.6.1.4.1.164.6.2.14.5.1.2ColumnschedWeekInMonthread-createcurrentThe week in month (schedMonth) during which the scheduled action should take place.
1.3.6.1.4.1.164.6.2.14.5.1.3ColumnschedParamread-createcurrentA Parameter that might be used whenever the scheduled action takes place. For summer-time schedule - This variable represents the time offset (in minutes), mea…
1.3.6.1.4.1.164.6.2.14.5.1.4ColumnschedXWeekread-createcurrentThe set of weeks within a month (schedMonth) during which the scheduled action should take place.
1.3.6.1.4.1.164.6.2.14.5.1.5ColumnschedActionread-createcurrentThe action that should take place when the schedule is executed. By default it is '60' for summer time start, and empty string otherwise.
1.3.6.1.4.1.164.6.2.14.8NodeschedControl
1.3.6.1.4.1.164.6.2.14.8.1ScalarschedDeleteFinishedCmdread-writecurrentWhen this object is set to on(3), the agent removes all schedTable entries whose schedOperStatus == finished(3). Upon completion, this object automatically tra…
1.3.6.1.4.1.164.6.2.14.8.2ScalarschedClearLogCmdread-writecurrentWhen this object is set to on(3), the agent clears the scheduler log file. Upon completion, this object automatically transitions to off(2).
1.3.6.1.4.1.164.6.2.14.9NodesystemDateTime
1.3.6.1.4.1.164.6.2.14.9.1ScalarsystemLastTimeChangeOffsetread-onlycurrentThis object contains the number of seconds by which the system local time was moved during the most recent time change.
1.3.6.1.4.1.164.6.2.14.9.2ScalarsystemLastTimeChangeReasonread-onlycurrentThis object specifies the trigger of the most recent system local time change.
1.3.6.1.4.1.164.6.2.15NodesystemPort
1.3.6.1.4.1.164.6.2.15.1TablephysicalConnectorTablenot-accessiblecurrentThis table includes the connector type of ports or interfaces.
1.3.6.1.4.1.164.6.2.15.1.1RowphysicalConnectorEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.1.1.1ColumnportIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.1.1.2ColumnphysicalConnectorread-onlycurrentThe connector of the port/interface. other - none of the specified connectors none - no connector.
1.3.6.1.4.1.164.6.2.15.1.1.3ColumnportOptWaveLengthread-onlycurrentWave Length of an Optical interface/port in [nm] and specification if Laser or not. notApplicable - for non-optical ports.
1.3.6.1.4.1.164.6.2.15.1.1.4ColumnportOptModeread-onlycurrentLaser Mode of an Optical Laser interface/port. notApplicable - for non-Laser ports.
1.3.6.1.4.1.164.6.2.15.1.1.5ColumnportBalanceread-writecurrentThis object is according to the port Impedance. For T1 - always balanced. For E1 - there are different impedance values for balanced and unbalanced.
1.3.6.1.4.1.164.6.2.15.1.1.6ColumnportDdmSupportread-onlycurrentSFP (Small Form Pluggable) port -support Digital Diagnostics Monitoring.
1.3.6.1.4.1.164.6.2.15.1.1.7ColumnportMfgNameread-onlycurrent(SFP) Port Manufacturer name (Maximum - 16 characters).
1.3.6.1.4.1.164.6.2.15.1.1.8ColumnportTypicalMaxRangeread-onlycurrentMaximum range supported by SFP port, in meter units.
1.3.6.1.4.1.164.6.2.15.1.1.9ColumnphysicalConnectorStringread-onlycurrent(SFP) connector type. It can be Vendor Specific (unknown in advance). Being a string, the object is not affected by any future new connectors. This object will…
1.3.6.1.4.1.164.6.2.15.1.1.10ColumnportVendorPartNoread-onlycurrentSFP Vendor Part Number. Being a string, the object is not affected by any future new SFPs.
1.3.6.1.4.1.164.6.2.15.1.1.11ColumnphysicalConnectorUsedread-writecurrentThis object is relevant only when the value of physicalConnector is comboUtpSfpIn(76) or comboUtpSfpOut(77). sfpOrRj45 - (default value) If SFP is inserted (In…
1.3.6.1.4.1.164.6.2.15.1.1.18ColumnphysicalConnectorSfpWaveLengthread-onlycurrentWavelength of a fiber optic SFP/XFP in units of hundredths of nm. The value zero is returned for non-optical ports.
1.3.6.1.4.1.164.6.2.15.2NodeprtSupervisory
1.3.6.1.4.1.164.6.2.15.2.1TableprtSpTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.6.2.15.2.1.1RowprtSpEntrynot-accessiblecurrentSupervisory port parameter table.
1.3.6.1.4.1.164.6.2.15.2.1.1.1ColumnprtSupervisoryIndexread-onlycurrentThe SP port index. For some products, having modules (cards): The LS byte of the integer is the port index 1..255. The MS byte is different than 0 only if the …
1.3.6.1.4.1.164.6.2.15.2.1.1.2ColumnprtSupervisoryRateread-writecurrentThis attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent.
1.3.6.1.4.1.164.6.2.15.2.1.1.3ColumnprtSupervisoryDataBitsread-writecurrentThis attribute indicates the number of data bits in an async frame
1.3.6.1.4.1.164.6.2.15.2.1.1.4ColumnprtSupervisoryParityread-writecurrentThis attribute indicates the parity mode in an async frame
1.3.6.1.4.1.164.6.2.15.2.1.1.5ColumnprtSupervisoryStopBitsread-writecurrentThis attribute indicates the parity mode in an async frame.
1.3.6.1.4.1.164.6.2.15.2.1.1.6ColumnprtSupervisoryUsageread-writecurrentThis attribute indicates the usage of the SP port.
1.3.6.1.4.1.164.6.2.15.2.1.1.7ColumnprtSupervisoryInterfaceread-writecurrentThis attribute indicates the supervisory port interface.
1.3.6.1.4.1.164.6.2.15.2.1.1.8ColumnprtSupervisoryCTSread-writecurrentCTS line state.
1.3.6.1.4.1.164.6.2.15.2.1.1.9ColumnprtSupervisoryDcdDelayread-writecurrentDCD delay in msec.
1.3.6.1.4.1.164.6.2.15.2.1.1.10ColumnprtSupervisoryDSRread-writecurrentDSR line state.
1.3.6.1.4.1.164.6.2.15.2.1.1.11ColumnprtSupervisoryRoutProtocolread-writecurrentThis attribute indicates the routing protocol of the port. notApplicable - for DP.
1.3.6.1.4.1.164.6.2.15.3NodeprtPerformance
1.3.6.1.4.1.164.6.2.15.3.1TableprtPerfTablenot-accessiblecurrentThis table includes G.826 ports or interfaces.
1.3.6.1.4.1.164.6.2.15.3.1.1RowprtPerfEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.3.1.1.1ColumnprtPerfIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.3.1.1.2ColumnprtPerfPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last prtPerfSaveAndResetCmd received…
1.3.6.1.4.1.164.6.2.15.3.1.1.3ColumnprtPerfElapsedTimeread-onlycurrentElapsed Time in seconds. - for prtPerfPeriodRef=currentPeriod: The period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndRes…
1.3.6.1.4.1.164.6.2.15.3.1.1.4ColumnprtPerfUASread-onlycurrentNumber of Unavailable Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.5ColumnprtPerfESread-onlycurrentNumber of Errored Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.6ColumnprtPerfSESread-onlycurrentNumber of Severely Errored Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.7ColumnprtPerfBBEread-onlycurrentNumber of Background Block (or Frame) Errors for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.8ColumnprtPerfBlocksPerSecread-onlycurrentBlocks per second (or frames per second) of the port/interface indicated by portIdx. This object is constant for a certain port/interface. It is not affected b…
1.3.6.1.4.1.164.6.2.15.3.1.1.9ColumnprtPerfTimeTagread-onlycurrentTime Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was executed. This object is applicable only for prtPerfPeriodRef=lastPeriod. For prtPerfPe…
1.3.6.1.4.1.164.6.2.15.3.1.1.10ColumnprtPerfSaveAndResetCmdread-writecurrentA command per port/interface, to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. This object is applica…
1.3.6.1.4.1.164.6.2.15.4NodeprtTest
1.3.6.1.4.1.164.6.2.15.4.1TableprtTestTablenot-accessiblecurrentThis table includes test data for ports or interfaces.
1.3.6.1.4.1.164.6.2.15.4.1.1RowprtTestEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.4.1.1.1ColumnprtTestIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.4.1.1.2ColumnprtTestCmdAndStatusread-writecurrentSetting this object to a value as detailed further on (except 0) will initiate a test on the specific port. The test/s requested will be set according to the r…
1.3.6.1.4.1.164.6.2.15.4.1.1.3ColumnprtBertCounterread-onlycurrentThis object indicates the number of BERT errors encountered during the BERT operation. It is valid only when BERT (Bit Error Rate Test) is active on the specif…
1.3.6.1.4.1.164.6.2.15.4.1.1.4ColumnprtTestInitiatorread-onlycurrentThis object indicates who initiated this port's test/s.
1.3.6.1.4.1.164.6.2.15.4.1.1.5ColumnprtTestTimeoutread-writecurrentThis object is applicable only when a single test is running. It indicates the test activation timeout in minutes. For RICi-E1T1, RICi-E3T3 and LRS-16, the mea…
1.3.6.1.4.1.164.6.2.15.4.1.1.6ColumnprtTestVctRxResultread-onlycurrentThis object indicates the result of the Vct on the cable connected to the RX connector.
1.3.6.1.4.1.164.6.2.15.4.1.1.7ColumnprtTestVctTxResultread-onlycurrentThis object indicates the result of the Vct on the cable connected to the TX connector.
1.3.6.1.4.1.164.6.2.15.4.1.1.8ColumnprtTestVctRxDistanceread-onlycurrentThis object indicates the distance in Meters to the RX cable Open/ Short location discovered by the Vct. This parameter is applicable for Vct Result = Normal o…
1.3.6.1.4.1.164.6.2.15.4.1.1.9ColumnprtTestVctTxDistanceread-onlycurrentThis object indicates the distance in Meters to the TX cable Open/ Short location discovered by the Vct. This parameter is applicable for Vct Result = Normal o…
1.3.6.1.4.1.164.6.2.15.4.1.1.10ColumnprtTestVctCmdread-writecurrentVct command. on (3) = Start Vct on both cables connected to RX and TX connectors of this port. Agent will perform the required command and change automatically…
1.3.6.1.4.1.164.6.2.15.4.1.1.11ColumnprtTestVctRxCrossPairread-onlycurrentThis object should be equal to the Index (prtTestIdx) of the Rx cross pair. This object is applicable only for Vct Result = shortToCrossPair or coupleWithCross…
1.3.6.1.4.1.164.6.2.15.4.1.1.12ColumnprtTestVctTxCrossPairread-onlycurrentThis object should be equal to the Index (prtTestIdx) of the Tx cross pair. This object is applicable only for Vct Result = shortToCrossPair or coupleWithCross…
1.3.6.1.4.1.164.6.2.15.4.1.1.13ColumnprtTestActivationDelayread-writecurrentThis object is applicable only when a single test is running. It indicates test activation delay in seconds. A Value of 0 indicates that the test starts immedi…
1.3.6.1.4.1.164.6.2.15.4.1.1.14ColumnprtTestMacSwapLoopDataModeread-writecurrentThis object defines which part of the data will be looped back.
1.3.6.1.4.1.164.6.2.15.4.1.1.15ColumnprtTestMacSwapLoopVlanIdread-writecurrentThis object specifies the VLAN ID for prtTestMacSwapLoopDataMode=specificVlan.
1.3.6.1.4.1.164.6.2.15.4.1.1.16ColumnprtTestMacSwapLoopDirectionread-writecurrentThis object defines the direction of the performed loopback. In ETX102 'local' corresponds to Ingress loop (either on User port or on Network port), and 'remot…
1.3.6.1.4.1.164.6.2.15.4.1.1.17ColumnprtTestMacSwapLoopDestAddrread-writecurrentConfigures the MAC address that will be sent in the Destination field of the packet in the outgoing direction.
1.3.6.1.4.1.164.6.2.15.4.1.1.18ColumnprtTestMacSwapLoopSrcAddrread-writecurrentConfigures the MAC address that will be sent in the Source field of the packet in the outgoing direction.
1.3.6.1.4.1.164.6.2.15.4.1.1.19ColumnprtTestOamMinRoundTripDelayread-onlycurrentThe mininal value of round trip delay of loopback message for a session of OAM loopback.Units are msec.
1.3.6.1.4.1.164.6.2.15.4.1.1.20ColumnprtTestOamMaxRoundTripDelayread-onlycurrentThe maximum value of round trip delay of loopback message for a session of OAM loopback.Units are msec.
1.3.6.1.4.1.164.6.2.15.4.1.1.21ColumnprtTestOamAvgRoundTripDelayread-onlycurrentThe average round trip delay of loopback message for a session of OAM loopback.Units are msec.
1.3.6.1.4.1.164.6.2.15.4.1.1.22ColumnprtTestOamTxIntervalread-writecurrentIndicates the interval between loopback sent messages.Units are msec.
1.3.6.1.4.1.164.6.2.15.4.1.1.23ColumnprtTestDestinationIpAddressread-writecurrentIndicates the destination IP Address in the transmitted messages that are looped back.
1.3.6.1.4.1.164.6.2.15.4.1.1.24ColumnprtTestForceTTLread-writecurrentTime-to-live.Number of hops the loopback message will go through the net before deciding to discard it.
1.3.6.1.4.1.164.6.2.15.4.1.1.25ColumnprtTestBwProfileread-writedeprecatedIndicates the BW profile (from bwProfileTable) that is assigned to the loopback test in order to limit the traffic that is looped back.
1.3.6.1.4.1.164.6.2.15.4.1.1.26ColumnprtTestSourceIpAddressread-writecurrentIndicates the source IP Address in the transmitted messages that are looped back.
1.3.6.1.4.1.164.6.2.15.4.1.1.27ColumnprtTestRemainTimeread-writecurrentIndicates the remain time for test activation in seconds.
1.3.6.1.4.1.164.6.2.15.5NodeprtParam
1.3.6.1.4.1.164.6.2.15.5.1TableprtParamTablenot-accessiblecurrentThis table includes general port parameters. The meaning is different for every product that supports it due to a general parameter - prtControlCnfg. For ACE20…
1.3.6.1.4.1.164.6.2.15.5.1.1RowprtParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.5.1.1.1ColumnprtParamIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.5.1.1.2ColumnprtControlCnfgread-writecurrentThis object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For ACE2002: This parameter will i…
1.3.6.1.4.1.164.6.2.15.5.1.1.3ColumnprtParamClkSrcread-writecurrentThe source of Transmit Clock. 'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' or 'internal' …
1.3.6.1.4.1.164.6.2.15.5.1.1.4ColumnprtParamPhantomread-writecurrentPower feeding to another device.
1.3.6.1.4.1.164.6.2.15.5.1.1.5ColumnprtParamResetStatsCmdread-writecurrenton (3) - Reset all statistics of the selected port. lacp (4) - Reset LACP statistics of the selected port. l2cp (5) - Reset L2CP statistics of the selected por…
1.3.6.1.4.1.164.6.2.15.5.1.1.6ColumnprtParamLastResetStatsTimeread-onlycurrentThe value of MIB II's sysUpTime object at the last time that prtParamResetStatsCmd was Set to on(3) for this port. If prtParamResetStatsCmd was never Set to on…
1.3.6.1.4.1.164.6.2.15.5.1.1.7ColumnprtParamInterfaceTyperead-writecurrentThe interface type of the port, or the frequency used as clock reference. Clock reference values may be either e1(2) or t1(3), gps (18) or wave with the specif…
1.3.6.1.4.1.164.6.2.15.5.1.1.8ColumnprtParamClearAlarmread-writecurrentSetting this attribute to ON, will enforce a clear operation on the Port Alarms. Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.6.2.15.5.1.1.9ColumnprtParamLedsread-onlycurrentThis entry specifies the LEDs status of the port. Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON, 1…
1.3.6.1.4.1.164.6.2.15.5.1.1.10ColumnprtParamLineLengthread-writecurrentLine Length of the line connected to this port.
1.3.6.1.4.1.164.6.2.15.5.1.1.11ColumnprtParamUsageread-writecurrentDefines whether this port works as User port or as Network port.
1.3.6.1.4.1.164.6.2.15.5.1.1.12ColumnprtParamMappingModeread-writecurrentThis object defines path protection on SONET/SDH link Auto - SONET/SDH mapping for port is copied automatically to same TU on the redundant SONET/SDH local (re…
1.3.6.1.4.1.164.6.2.15.5.1.1.13ColumnprtParamAlarmIndicationread-onlycurrentThis object indicates status-aggregation of non-masked alarms associated with all interface layers, related to this physical port. When at least one non-masked…
1.3.6.1.4.1.164.6.2.15.5.1.1.14ColumnprtParamClkQualityLevelread-onlycurrentThis parameter indicates quality level of clock signal. Quality is encoded according to SSM (Synchronization Status Messages) encoding. Bits 8 -5 of byte are e…
1.3.6.1.4.1.164.6.2.15.5.1.1.15ColumnprtParamClkWaveShaperead-writecurrentWave shape of station clock source signal. This parameter is applicable only when prtParamInterfaceType value is one of the following: f1544kHz(15), f2048kHz(1…
1.3.6.1.4.1.164.6.2.15.5.1.1.16ColumnprtParamStatusread-onlycurrentStation clock source Status.
1.3.6.1.4.1.164.6.2.15.5.1.1.17ColumnprtParamSignalLevelread-onlycurrentThis object indicates signal level (in thenth of dB units) on selected port.
1.3.6.1.4.1.164.6.2.15.5.1.1.18ColumnprtParamClkUserQualityLevelread-writecurrentThis parameter allows user to mark quality level of clock. Quality is encoded according to SSM (Synchronization Status Messages) encoding. Bits 8 -5 of byte ar…
1.3.6.1.4.1.164.6.2.15.5.1.1.19ColumnprtParamDataRateread-writecurrentRate of serial data port (V.11, V.24, V.35) in kbps units.
1.3.6.1.4.1.164.6.2.15.5.1.1.20ColumnprtParamLoopDetectread-writecurrentEnable/disable Loop Detection on a port. Examples of ports: physical, Channelized Bundle over TDM Uplink, Bridge Ports.
1.3.6.1.4.1.164.6.2.15.5.1.1.21ColumnprtParamActUponLoopDetectread-writecurrentThis parameter is used to indicate which actions should be taken in case a loop is detected in the network the port is part of. Each action is represented by a…
1.3.6.1.4.1.164.6.2.15.5.1.1.22ColumnprtParamPSNLayerread-writecurrentThis object indicates the network layer from which clock is derived.
1.3.6.1.4.1.164.6.2.15.5.1.1.23ColumnprtParamRxSsmread-writecurrentThis object indicates if Station Clock SSM messages received will serve as criteria for clock selection.
1.3.6.1.4.1.164.6.2.15.5.1.1.24ColumnprtParamClkSsmRxSourceread-writecurrentThis object indicates the Sa-bit of the E1 frame, in which SSM messages are carried.
1.3.6.1.4.1.164.6.2.15.5.1.1.26ColumnprtParamFarEndDeviceread-writecurrentProgrammed Far-End device connected to this port. This object is relevant for products having multiple DBs. It will enable configuring offline, the relevant da…
1.3.6.1.4.1.164.6.2.15.5.1.1.27ColumnprtParamTxClkread-writecurrentenable/disable station clock signal output.
1.3.6.1.4.1.164.6.2.15.5.1.1.28ColumnprtParamSdBerThresholdread-writecurrentThe Signal Degrade Bit Error Rate Threshold. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error…
1.3.6.1.4.1.164.6.2.15.5.1.1.29ColumnprtParamLoopDetectStatusread-onlycurrentThis object shows whether a loop was detected on the current port.
1.3.6.1.4.1.164.6.2.15.5.1.1.30ColumnprtParamSupportedFeaturesread-onlycurrentThis MIB object denotes supported features by the port/interface. The bit legend must be kept identical to all devices. Bit 0 = '1' denotes that the port/inter…
1.3.6.1.4.1.164.6.2.15.5.1.1.31ColumnprtParamPortStatusread-onlycurrentThis object shows the status of the current port. The status is a bit map represented as a sum, therefore, it can represent multiple failures. When no failure,…
1.3.6.1.4.1.164.6.2.15.5.1.1.34ColumnprtParamSsmTxread-writecurrentThis object defines the SSM transmission from this port. For SDH/SONET interfaces the object means the following: disable (2): - force DNU (DUS) SSM message se…
1.3.6.1.4.1.164.6.2.15.5.1.1.36ColumnprtParamAliasread-writecurrentThis object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface.
1.3.6.1.4.1.164.6.2.15.5.1.1.38ColumnprtParamTxClockInstanceread-writecurrentThis parameter specifies the instance of the clock domain that is used as transmision clock source. It is equal to the csmDomainEntry.csmDomainIdx when the CSM…
1.3.6.1.4.1.164.6.2.15.5.1.1.41ColumnprtParamEntPhysicalIndexread-onlycurrentThe object contains index of the related entPhysicalEntry of the ENTITY-MIB (RFC 4133) and ENTITY-STATE-MIB (RFC 4268). The index is built accordign to the rul…
1.3.6.1.4.1.164.6.2.15.5.1.1.45ColumnprtParamSsmTxTyperead-writecurrentThis object defines the SSM transmission type from this port..
1.3.6.1.4.1.164.6.2.15.5.2TableprtXTablenot-accessiblecurrentThis table includes general port parameters, indexed by ifIndex
1.3.6.1.4.1.164.6.2.15.5.2.1RowprtXEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.5.2.1.1ColumnprtXCliPortStringread-onlycurrentThe exact string that is used by the CLI to identify this interface. The string includes the port type and the port identifier. Example port strings: 'ethernet…
1.3.6.1.4.1.164.6.2.15.6NodeprtIP
1.3.6.1.4.1.164.6.2.15.6.1TableprtIpParamTablenot-accessiblecurrentA table - Parameters for IP Ports.
1.3.6.1.4.1.164.6.2.15.6.1.1RowprtIpParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.6.1.1.1ColumnprtIpParamConfigIdxread-onlycurrentThis object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). For products having Agent and Edit configuratio…
1.3.6.1.4.1.164.6.2.15.6.1.1.2ColumnprtIpParamSlotIdxread-onlycurrentThis object indicates a unique number of the slot position in which the module is inserted. notApplicable = 255 (for products that don't have slots). For KM: k…
1.3.6.1.4.1.164.6.2.15.6.1.1.3ColumnprtIpParamIdxread-onlycurrentThis object indicates a unique Port Index.
1.3.6.1.4.1.164.6.2.15.6.1.1.4ColumnprtIpParamHostIPread-writecurrentThe host interface IP address.
1.3.6.1.4.1.164.6.2.15.6.1.1.5ColumnprtIpParamHostMaskread-writecurrentThe host interface subnet mask.
1.3.6.1.4.1.164.6.2.15.6.1.1.6ColumnprtIpParamDefaultGatewayread-writecurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.6.2.15.6.1.1.7ColumnprtIpParamMediaModeread-onlycurrentThis object indicates the real Media Mode.
1.3.6.1.4.1.164.6.2.15.6.1.1.8ColumnprtIpParamMediaRateread-onlycurrentThis object indicates the real Media Rate (Mbps).
1.3.6.1.4.1.164.6.2.15.6.1.1.9ColumnprtIpParamMngVlanSupportread-writecurrentManagement VLAN support (Tagging). no - No support of VLAN Tagging. yes - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.6.2.15.6.1.1.10ColumnprtIpParamMngVlanIdread-writecurrentManagement VLAN ID.
1.3.6.1.4.1.164.6.2.15.6.1.1.11ColumnprtIpParamMngVlanPriorityread-writecurrentManagement VLAN Frame priority.
1.3.6.1.4.1.164.6.2.15.6.1.1.12ColumnprtIpParamRingModeread-writecurrentThis object indicates If Ring Mode is enabled or not.
1.3.6.1.4.1.164.6.2.15.6.1.1.13ColumnprtIpParamProtIpEnableread-writecurrentThis object indicates whether a list of Protected IP Addresses is enabled or not. This object is applicable only if prtIpParamRingMode=enable.
1.3.6.1.4.1.164.6.2.15.6.1.1.14ColumnprtIpParamTrafficPriorityread-writecurrentThis object indicates the traffic priority of this port.
1.3.6.1.4.1.164.6.2.15.6.1.1.15ColumnprtIpParamRemoteIPread-writecurrentThis is the IP Address of the remote device that is connected to the current device (Point to Point Application). It is used for sending OAM packets on the LAN…
1.3.6.1.4.1.164.6.2.15.6.1.1.16ColumnprtIpParamMaxTxBandwidthread-writecurrentThis object shows the Max Bandwidth allowed on the LAN. Full - means that a Maximum of 100 Mega Byte Rate may go through the LAN. e1(3) means that the maximum …
1.3.6.1.4.1.164.6.2.15.6.1.1.17ColumnprtIpParamTosread-writecurrentTOS = Type of Service transmitted. Valid values: 0..255.
1.3.6.1.4.1.164.6.2.15.6.1.1.18ColumnprtIpParamConnectread-writecurrentPort Connection.
1.3.6.1.4.1.164.6.2.15.6.1.1.19ColumnprtIpParamAgingTimeread-writecurrentAging Time in seconds.
1.3.6.1.4.1.164.6.2.15.6.1.1.20ColumnprtIpParamEncapsulationProtread-writecurrentEncapsulation Protocol.
1.3.6.1.4.1.164.6.2.15.6.1.1.21ColumnprtIpParamEncapProtPortread-writecurrentEncapsulation Protocol Port (TCP/UDP Port).
1.3.6.1.4.1.164.6.2.15.6.1.1.22ColumnprtIpParamVlanSupportread-writecurrentVLAN support (Tagging). 'no' - No support of VLAN Tagging. 'yes' - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.6.2.15.6.1.1.23ColumnprtIpParamVlanIdread-writecurrentVLAN Identifier.
1.3.6.1.4.1.164.6.2.15.6.1.1.24ColumnprtIpParamVlanPriorityread-writecurrentVLAN Frame priority.
1.3.6.1.4.1.164.6.2.15.6.1.1.25ColumnprtIpParamDoubleTagVlanIdread-writecurrentVLAN Identifier of the Double Tagging VLAN.
1.3.6.1.4.1.164.6.2.15.6.1.1.26ColumnprtIpParamDoubleTagVlanPriorityread-writecurrentVLAN Frame priority of the Double Tagging VLAN.
1.3.6.1.4.1.164.6.2.15.6.1.1.27ColumnprtIpParamVlanTaggingread-writecurrentVLAN Tagging. 'unmodified' - No change will be done to the Frame. 'tag' - Add Tag to Untagged Frames. 'doubleTag' - Add Tag to all Frames. 'doubleTagAndFallBac…
1.3.6.1.4.1.164.6.2.15.6.1.1.28ColumnprtIpParamRateLimitread-writecurrentThe maximum rate permitted to transfer via this port, in Kbps.
1.3.6.1.4.1.164.6.2.15.6.1.1.29ColumnprtIpParamDefInterfaceread-writecurrentThe Default Interface for packets with unresolved destination subnet. For internal-X port: 100 + X .
1.3.6.1.4.1.164.6.2.15.6.1.1.30ColumnprtIpParamMngread-writecurrentThis object indicates whether Management is enabled/disabled via this port.
1.3.6.1.4.1.164.6.2.15.6.1.1.31ColumnprtIpParamFloodedRateLimitread-writecurrentThe maximum rate permitted to transfer broadcast, multicast, and unicast flooded frames via this port, in Kbps. 0 - Disable. In Ipmux14 this parameter is appli…
1.3.6.1.4.1.164.6.2.15.6.1.1.32ColumnprtIpParamBurstSizeread-writecurrentThe burst size that the port can support beyond rate limitation determined in prtIpParamRateLimit. Burst Size is measured in bytes.
1.3.6.1.4.1.164.6.2.15.6.1.1.33ColumnprtIpParamLimitPacketTyperead-writecurrentThe packet type that will be rate limited. Rate limitation determined in prtIpParamRateLimit. all - All packet types are rate limited. broadMultiFloodedUnicast…
1.3.6.1.4.1.164.6.2.15.6.1.1.34ColumnprtIpParamKeepAliveIntervalread-writecurrentThis parameter indicates the period of time (in msec.) between two consequent Keep Alive messages.
1.3.6.1.4.1.164.6.2.15.6.1.1.35ColumnprtIpParamKeepAliveThreshread-writecurrentThis parameter indicates the maximum number of missed Keep Alive answer messages acceptable, after which link status will be failed.
1.3.6.1.4.1.164.6.2.15.6.1.1.36ColumnprtIpParamP2pKeepAliveVlanIdread-writecurrentDedicated VLAN ID for keep alive messages.
1.3.6.1.4.1.164.6.2.15.6.1.1.37ColumnprtIpParamP2pKeepAliveVlanPrioread-writecurrentVLAN priority for P2P keep alive messages .
1.3.6.1.4.1.164.6.2.15.6.1.1.38ColumnprtIpParamRingAdjacentMacAddrread-onlycurrentThe MAC address of the adjacent NE connected to this port in an ETH ring. If the port is not a member of a ring, the value of this parameter will be 00-00-00-0…
1.3.6.1.4.1.164.6.2.15.7NodeprtClkSrc
1.3.6.1.4.1.164.6.2.15.7.1TableprtClkSrcTablenot-accessiblecurrentA table - Parameters for master and fallback clock source of ports .
1.3.6.1.4.1.164.6.2.15.7.1.1RowprtClkSrcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.7.1.1.1ColumnprtClkSrcCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.6.2.15.7.1.1.2ColumnprtClkSrcPrtIdxnot-accessiblecurrentThis object indicates a unique Port Index (receiving clock). Refer to device specification for port Index
1.3.6.1.4.1.164.6.2.15.7.1.1.3ColumnprtClkSrcIdxnot-accessiblecurrentAn index in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters
1.3.6.1.4.1.164.6.2.15.7.1.1.4ColumnprtClkSrcModeread-writecurrentThis entry indicates the source the nodal timing is locked to.
1.3.6.1.4.1.164.6.2.15.7.1.1.5ColumnprtClkSrcPrtread-writecurrentThis entry is valid only when working in rxClk mode. It specifies the port from which the clock willl be taken. Refer to device specification for source port I…
1.3.6.1.4.1.164.6.2.15.8NodeopticalPort
1.3.6.1.4.1.164.6.2.15.8.1TableoptPrtMonitorTablenot-accessiblecurrentA table - optical port (e.g SFP) monitoring parameters, according to SFF-8472 Specification for Diagnostic Monitoring Interface for Optical Xcvrs. and ITU-T re…
1.3.6.1.4.1.164.6.2.15.8.1.1RowoptPrtMonitorEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.8.1.1.1ColumnoptPrtMonitorPrtIdxnot-accessiblecurrentThis object indicates a unique (optical) Port Index . Refer to device specification for port Index.
1.3.6.1.4.1.164.6.2.15.8.1.1.2ColumnoptPrtMonitorSamplenot-accessiblecurrentThis index indicates historic and current values - minimum, maximum and actual (current) value.
1.3.6.1.4.1.164.6.2.15.8.1.1.3ColumnoptPrtMonitorTxPowerread-onlycurrentTransmitted optical power level. Value is given in units of hundredth (1/100) of dBm.
1.3.6.1.4.1.164.6.2.15.8.1.1.4ColumnoptPrtMonitorLaserBiasread-onlycurrentLASER bias current level. Value is given in units of microAmper (uA).
1.3.6.1.4.1.164.6.2.15.8.1.1.5ColumnoptPrtMonitorLaserTempread-onlycurrentLASER temperature level, in hundredth (1/100) (C) degrees.
1.3.6.1.4.1.164.6.2.15.8.1.1.6ColumnoptPrtMonitorRxPowerread-onlycurrentReceived optical power in units of hundredth (1/100) of dBm.
1.3.6.1.4.1.164.6.2.15.8.1.1.7ColumnoptPrtMonitorSupplyVoltageread-onlycurrentSupply voltage, in hundredth (1/100) of volts (V).
1.3.6.1.4.1.164.6.2.15.8.2TableoptPrtCnfgTablenot-accessiblecurrentA table - optical port configuration
1.3.6.1.4.1.164.6.2.15.8.2.1RowoptPrtCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.8.2.1.1ColumnoptPrtCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.x.
1.3.6.1.4.1.164.6.2.15.8.2.1.2ColumnoptPrtCnfgPrtIdxnot-accessiblecurrentThis object indicates a unique (optical) Port Index . Refer to device specification for port Index.
1.3.6.1.4.1.164.6.2.15.8.2.1.3ColumnoptPrtCnfgALSread-writecurrentenable/disable Automatic Laser Shutdown
1.3.6.1.4.1.164.6.2.16ScalarsystemResetAllStatsCmdread-writecurrentReset statistics of all ports and connections of the device.
1.3.6.1.4.1.164.6.2.17ScalarsystemClearTablesCmdread-writecurrenttempCnfgTables - Set *RowStatus = destroy for all entries of some tables having *RowStatus object, for temporary configuration only! (255). For the relevant ta…
1.3.6.1.4.1.164.6.2.18ScalarsystemParameterread-writecurrentThis parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a table that already has row wit…
1.3.6.1.4.1.164.6.2.19ScalaragnGlobalAlarmMaskread-writecurrentThe value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certain octet represents a certain a…
1.3.6.1.4.1.164.6.2.20ScalaralarmSeverityread-onlycurrentThis object specifies the severity of the alarms.
1.3.6.1.4.1.164.6.2.21ScalaralarmStateread-onlycurrent.
1.3.6.1.4.1.164.6.2.22ScalaragnTestStatusread-onlycurrentIndicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at least one test in progress on th…
1.3.6.1.4.1.164.6.2.23ScalarsystemSaveAndResetAllStatsCmdread-writecurrenton - a command to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. off - agent will automatically change…
1.3.6.1.4.1.164.6.2.24ScalarsystemDefaultGatewayread-writecurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.6.2.25TablesystemPsTablenot-accessiblecurrentThis table describes the PS types of a device. Usage of this table is specified in the device's NMS SRS
1.3.6.1.4.1.164.6.2.25.1RowsystemPsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.25.1.1ColumnsystemPsIndex1read-onlycurrentFirst Index. In HUBs: 1 = PS-A slot 2 = PS-B slot 3 = PS-C slot. In SA units: 1 = PS1 2 = PS2 Default = 1
1.3.6.1.4.1.164.6.2.25.1.2ColumnsystemPsIndex2read-onlycurrentSecond Index. In HUBs: 1 always. In SA units: 1 = Local 2 = Remote Default = 1.
1.3.6.1.4.1.164.6.2.25.1.3ColumnsystemPsTyperead-onlycurrentThe type of PS, for a stand-alone product. acDc - PS that supports both AC and DC. acPF - Power Feeding (phantom) box that is feeding another box by external A…
1.3.6.1.4.1.164.6.2.25.1.4ColumnsystemPsStatusread-onlycurrentThe Status of the PS unit.
1.3.6.1.4.1.164.6.2.25.1.5ColumnsystemPsHotSwapread-onlycurrentIs PS unit hot swap or fixed.
1.3.6.1.4.1.164.6.2.26ScalaragnFansread-onlycurrentThis entry specifies the FANs existence and status. Each fan will be represented by 2 bits, where the first bit (right) will specify the existence: (0= Not exi…
1.3.6.1.4.1.164.6.2.27ScalaragnSendTrapParameterread-writecurrentThis object specifies if the agent will attach a specific parameter to a trap. For ACE2002 the agent will attach or not the openViewSeverity parameter accordin…
1.3.6.1.4.1.164.6.2.28ScalaragnSensorsStatusread-onlycurrentThis entry specifies the Sensors (Temperature sensors or others) existence and status. Each sensor will be represented by 2 bits, where the first bit (right) w…
1.3.6.1.4.1.164.6.2.29ScalaragnStationClockCardread-onlycurrentThis entry specifies the station clock card existence and status. notExist - station clock card (piggy) does not exist. notValid - station clock card exists bu…
1.3.6.1.4.1.164.6.2.30ScalarxcIndexNextread-onlycurrentThis object contains an appropriate value to be used for xcIndex when creating entries in the xcTable. The value 0 indicates that no unassigned entries are ava…
1.3.6.1.4.1.164.6.2.31TablexcTablenot-accessiblecurrentConfiguration of system cross-connect entries. The table follows the behavior described in RFC 2515, RFC 1604 regarding the creation deletion and modification …
1.3.6.1.4.1.164.6.2.31.1RowxcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.31.1.1ColumnxcIndexnot-accessiblecurrentCross Connect Identifier.
1.3.6.1.4.1.164.6.2.31.1.2ColumnxcIfIndex1not-accessiblecurrentThe interface Index from the ifTable, which identify one side of the connection.
1.3.6.1.4.1.164.6.2.31.1.3ColumnxcVpinot-accessiblecurrentThe VPI value.
1.3.6.1.4.1.164.6.2.31.1.4ColumnxcVcinot-accessiblecurrentThe VCI value.
1.3.6.1.4.1.164.6.2.31.1.5ColumnxcIfIndex2not-accessiblecurrentThe interface Index from the ifTable, which identifies the other side of the connection.
1.3.6.1.4.1.164.6.2.31.1.6ColumnxcRowStatusread-createcurrentThis parameter allows NMS to create/delete entries of this table.
1.3.6.1.4.1.164.6.2.31.1.7ColumnxcDescrread-createcurrentA textual string containing information about the xc entry.
1.3.6.1.4.1.164.6.2.31.1.8ColumnxcAdminStatusread-createcurrentThe desired administrative status of this bi-directional cross-connect.
1.3.6.1.4.1.164.6.2.31.1.9ColumnxcOperStatusread-onlycurrentThe operational status of this bi-directional cross-connect.
1.3.6.1.4.1.164.6.2.31.1.10ColumnxcAttachedIfTyperead-onlycurrentThis object indicates if the specific VCC is already attached to any interface, and indicates the type of the interface. This object's purpose is to ease the c…
1.3.6.1.4.1.164.6.2.31.1.11ColumnxcInputPriorityread-createcurrentThis object is the priority, by which the LAN frames will be internaly sent to the ATM HW. This parameter is applicable if atmNteMdlInputPriorityMechanism=enab…
1.3.6.1.4.1.164.6.2.31.1.12ColumnxcBitMappingread-onlycurrentThis object maps this entry to a bit of an octet string. For ACE2002 this object maps the LAN VCC to the bit of the VLAN Port Lists. If the value is '0' then i…
1.3.6.1.4.1.164.6.2.32NodesystemModule
1.3.6.1.4.1.164.6.2.32.1NodemodlParam
1.3.6.1.4.1.164.6.2.32.1.1TablemodlParamTablenot-accessiblecurrentThis table include parameters for system modules.
1.3.6.1.4.1.164.6.2.32.1.1.1RowmodlParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.32.1.1.1.1ColumnmodlParamIndexread-onlycurrentThe module index. The index can be the slot number or any other module index as described in the specifications of the device. For Vmux-2100 device, the index …
1.3.6.1.4.1.164.6.2.32.1.1.1.2ColumnmodlParamResetread-writecurrentReset action to be performed on the module. Set the parameter will be done always to on(3) or factory (4). After performing the Reset operation, Agent will aut…
1.3.6.1.4.1.164.6.2.32.1.1.1.3ColumnmodlParamSwdlStatusread-onlycurrentThis parameter indicates whatever the swdl is in process or not.
1.3.6.1.4.1.164.6.2.32.1.1.1.4ColumnmodlParamLedsread-onlycurrentThis entry specifies the LEDs status of the module. Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON,…
1.3.6.1.4.1.164.6.2.32.1.1.1.5ColumnmodlParamTyperead-onlycurrentThis attribute indicates the Module Type.
1.3.6.1.4.1.164.6.2.32.1.1.1.6ColumnmodlParamSwVerread-onlycurrentThis attribute indicates the Module's Software Version.
1.3.6.1.4.1.164.6.2.33ScalaragnNearFarConnectionread-onlycurrentThis parameter describes the connection between near-end and far-end agents.
1.3.6.1.4.1.164.6.2.34NodeagnAccess
1.3.6.1.4.1.164.6.2.34.1ScalaragnTelnetAccessread-writecurrentEnable/Disable accessing the device via Telnet. disable - no one will be allowed to access the device via Telnet. enable - all users are allowed Telnet Access.…
1.3.6.1.4.1.164.6.2.34.2ScalaragnWebAccessread-writecurrentEnable/Disable accessing the device via Web. disable - no one will be allowed to access the device via Web. enable - all users are allowed Web Access. managers…
1.3.6.1.4.1.164.6.2.34.3ScalaragnRadiusAccessread-writecurrentEnable/Disable authentication via RADIUS server.
1.3.6.1.4.1.164.6.2.34.4ScalaragnSshAccessread-writecurrentEnable/Disable accessing the device via SSH. disable - no one will be allowed to access the device via SSH. enable - all users are allowed SSH Access. managers…
1.3.6.1.4.1.164.6.2.34.5ScalaragnTacacsAccessread-writecurrentEnable/Disable authentication via TACACS+ server.
1.3.6.1.4.1.164.6.2.34.6TabledeviceAccessTablenot-accessiblecurrentThis table trace tdevice access attempts
1.3.6.1.4.1.164.6.2.34.6.1RowdeviceAccessEntrynot-accessiblecurrentThis table .
1.3.6.1.4.1.164.6.2.34.6.1.1ColumndeviceAccessIndexnot-accessiblecurrentrunning index
1.3.6.1.4.1.164.6.2.34.6.1.2ColumndeviceAccessLoginTimeread-onlycurrentThe date and time that the user tried to login. Always in UTC format.
1.3.6.1.4.1.164.6.2.34.6.1.3ColumndeviceAccessLoginStatusread-onlycurrentLogin attempt Status
1.3.6.1.4.1.164.6.2.34.6.1.4ColumndeviceAccessUserNameread-onlycurrentLogin attempt User Name
1.3.6.1.4.1.164.6.2.34.6.1.5ColumndeviceAccessIpAddressTyperead-onlycurrentType of the IP Address designated by deviceAccessIpAddress
1.3.6.1.4.1.164.6.2.34.6.1.6ColumndeviceAccessIpAddressread-onlycurrentthe IP Address of the user (the value will be 0 if the deviceAccessMethod = localTerminal(1)
1.3.6.1.4.1.164.6.2.34.6.1.7ColumndeviceAccessMethodread-onlycurrentMethod used to access the device
1.3.6.1.4.1.164.6.2.34.6.1.8ColumndeviceAccessAuthenticationMethodread-onlycurrentThe method used to authenticate a logged-in user. notApplicable is used if the login session is rejected due to lack of resources, before the authentication st…
1.3.6.1.4.1.164.6.2.34.6.1.9ColumndeviceAccessSessionIdread-onlycurrentThe session ID. If login attempt failed, the value will be 0xFFFFFFFF
1.3.6.1.4.1.164.6.2.34.6.1.10ColumndeviceAccessLogoutTimeread-onlycurrentThe date and time that the session ended. This information will be filled only if the login succeed. Always in UTC format
1.3.6.1.4.1.164.6.2.34.6.1.11ColumndeviceAccessLogoutStatusread-onlycurrentThe status and reason of logout
1.3.6.1.4.1.164.6.2.34.6.1.13ColumndeviceAccessRemoteTerminalread-onlycurrentThe state of a remote session, which may be opened from the CLI session reperesented by this raw: inactive(1)- No active remote session serialInternal(101) - A…
1.3.6.1.4.1.164.6.2.34.6.1.14ColumndeviceAccessRemoteIpAddressTyperead-onlycurrentIf a remote IP (i.e. not over serial connection) session was opened from the CLI session represented by this entry, this object holds the type of the destinati…
1.3.6.1.4.1.164.6.2.34.6.1.15ColumndeviceAccessRemoteIpAddressread-onlycurrentIf a remote IP (i.e. not over serial connection) session was opened from the CLI session represented by this entry, this object holds the destination IP addres…
1.3.6.1.4.1.164.6.2.34.6.1.16ColumndeviceAccessRemoteLoginTimeread-onlycurrentDate and time (UTC) at which the user cnnected to a remote terminal.
1.3.6.1.4.1.164.6.2.34.7ScalaragnTftpAccessread-writecurrentEnable/Disable accessing the device via TFTP. By default this option is enable. disable - no one will be allowed to access the device via TFTP. enable - all us…
1.3.6.1.4.1.164.6.2.34.8ScalaragnSftpAccessread-writecurrentEnable/Disable accessing the device via SFTP. By default this option is enable. disable - no one will be allowed to access the device via SFTP. enable - all us…
1.3.6.1.4.1.164.6.2.34.9ScalaragnControlPortAccessread-writecurrentEnable/Disable the Control port management access. This command will be applied to all existing control ports.
1.3.6.1.4.1.164.6.2.34.11TablebannerTablenot-accessiblecurrentThis table contains banners the CLI displays.
1.3.6.1.4.1.164.6.2.34.11.1RowbannerEntrynot-accessiblecurrentEach entry contains up to 250 characters of a banner, identified by bannerType. If a banner contains more than 250 characters it spans multiple entries, indexe…
1.3.6.1.4.1.164.6.2.34.11.1.1ColumnbannerTypenot-accessiblecurrentBanner type.
1.3.6.1.4.1.164.6.2.34.11.1.2ColumnbannerLineNumbernot-accessiblecurrentBanner line number.
1.3.6.1.4.1.164.6.2.34.11.1.3ColumnbannerRowStatusread-createcurrentCreate and delete rows in this table. Only createAndGo and destroy are supported.
1.3.6.1.4.1.164.6.2.34.11.1.4ColumnbannerTextread-createcurrentBanner text.
1.3.6.1.4.1.164.6.2.35NodesystemInterface
1.3.6.1.4.1.164.6.2.35.1TableifCreateTablenot-accessiblecurrentThe Interface Configuration Table. This table enables to create interfaces of Entities.
1.3.6.1.4.1.164.6.2.35.1.1RowifCreateEntrynot-accessiblecurrentAn entry in the Interface Configuration table.
1.3.6.1.4.1.164.6.2.35.1.1.1ColumnifCreateEntityTyperead-onlycurrentThis object indicates the Type of the Entity that exists above the created interface. For a Logical Port, this value can be: other (1) when there is no fixed e…
1.3.6.1.4.1.164.6.2.35.1.1.2ColumnifCreateEntityIdxread-onlycurrentThis object indicates the Index of the Entity that exists above the created interface. For example, row indices for created Bridge Port 4 of Bridge 2 = [209.2.…
1.3.6.1.4.1.164.6.2.35.1.1.3ColumnifCreateNumberread-onlycurrentThis object indicates the number of the Interface that is created.
1.3.6.1.4.1.164.6.2.35.1.1.4ColumnifCreateRowStatusread-createcurrentThis object enables the user to create/delete entries in this table.
1.3.6.1.4.1.164.6.2.35.1.1.5ColumnifCreateTyperead-createcurrentThis object indicates the Type of the Interface that is created.
1.3.6.1.4.1.164.6.2.35.1.1.6ColumnifCreateIndexread-onlycurrentThis object indicates the ifIndex of the created Interface. The ifIndex is assigned by the device.
1.3.6.1.4.1.164.6.2.35.1.1.7ColumnifCreateConnectedToread-createcurrentThis object indicates the entity connected to the created Interface. The value of this object can be ifIndex of the connected entity or any other number that c…
1.3.6.1.4.1.164.6.2.35.1.1.8ColumnifCreateParamsread-createcurrentThis object represents one or more parameters of the created Interface. Each group of bits (one or more bits) represents a specific parameter and its possible …
1.3.6.1.4.1.164.6.2.35.1.1.9ColumnifCreateConnectionPointerread-createcurrentThis parameter represents the entity that is connected to this Interface. It can be used instead of ifCreateConnectedTo. It is an OBJECT IDENTIFIER. This param…
1.3.6.1.4.1.164.6.2.35.2NodeinterfacePerformance
1.3.6.1.4.1.164.6.2.35.2.1TableifPerfTablenot-accessiblecurrentInterface Performance Table. The propose of this table is to support statistics counters having 64 bit by using 2 parameters with syntax= Integer32. This is be…
1.3.6.1.4.1.164.6.2.35.2.1.1RowifPerfEntrynot-accessiblecurrentAn entry in the Interface Performance Table.
1.3.6.1.4.1.164.6.2.35.2.1.1.1ColumnifPerfCounterTypenot-accessiblecurrent2nd index of the ifPerfTable. This parameter represents the Counter Type. Each application can have a different association between this object's value and cou…
1.3.6.1.4.1.164.6.2.35.2.1.1.2ColumnifPerfLowCounterPartread-onlycurrentIn order to support Counters having 64 bit length, the performance counter is divided into two 32 bit parameters as follows: [ 64 bit parameter ] = [ High 32 b…
1.3.6.1.4.1.164.6.2.35.2.1.1.3ColumnifPerfHighCounterPartread-onlycurrentThis parameter holds the High 32 bits of the counter (see description in the above parameter).
1.3.6.1.4.1.164.6.2.35.2.1.1.4ColumnifPerfHCCounterread-onlycurrentThis High Capacity counter holds whole 64 bits of the counter indicated by ifPerfCounterType (concatenates both counter parts ifPerfHighCounterPart&ifPerfLowCo…
1.3.6.1.4.1.164.6.2.36NodesystemOam
1.3.6.1.4.1.164.6.2.36.1TablesystemOamTablenot-accessiblecurrentThe OAM Configuration Table.
1.3.6.1.4.1.164.6.2.36.1.1RowsystemOamEntrynot-accessiblecurrentAn entry in the OAM table.
1.3.6.1.4.1.164.6.2.36.1.1.1ColumnsystemOamCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.6.2.36.1.1.2ColumnsystemOamFrequencyread-writecurrentTime in sec. between 2 OAM packets.
1.3.6.1.4.1.164.6.2.36.1.1.3ColumnsystemOamTimeoutCyclesread-writecurrentNo. of cycles the agent will send OAM packets without receiving a response from the remote device before declaring that the connection to the remote side is do…
1.3.6.1.4.1.164.6.2.36.1.1.4ColumnsystemOamLinkCheckread-writecurrentThis MIB object determines whether continuous connectivity Link checks will be performed by the device for uplinks. For Vmux-2100: enable (3) value can be set …
1.3.6.1.4.1.164.6.2.36.2TablesystemOamDescrTablenot-accessiblecurrentThe OAM Descriptors Configuration Table.
1.3.6.1.4.1.164.6.2.36.2.1RowsystemOamDescrEntrynot-accessiblecurrentAn entry in the OAM table.
1.3.6.1.4.1.164.6.2.36.2.1.1ColumnsystemOamDescrIdxnot-accessiblecurrentThe OAM Descriptor Index.
1.3.6.1.4.1.164.6.2.36.2.1.2ColumnsystemOamDescrRowStatusread-createcurrentEnables the user to create/delete entries in this table.
1.3.6.1.4.1.164.6.2.36.2.1.3ColumnsystemOamDescrModeread-createcurrentThe OAM Mode of the Descriptor.
1.3.6.1.4.1.164.6.2.36.2.1.4ColumnsystemOamDescrCCDirectionread-createcurrentOAM Continuity Check function mode. both(2) - Agent sends OAM CC cells and checks received OAM CC cells. none(3) - Agent does not send and does not check recei…
1.3.6.1.4.1.164.6.2.36.2.1.5ColumnsystemOamDescrLoopbackOperationread-createcurrentThe OAM Loopback function mode. off(2) - Stop sending loopback OAM cells. on(3) - Start loopback OAM cells.
1.3.6.1.4.1.164.6.2.36.2.1.6ColumnsystemOamDescrLoopbackDestAddrread-createcurrentLoopback Destination Address.
1.3.6.1.4.1.164.6.2.36.2.1.7ColumnsystemOamDescrXcCounterread-onlycurrentThe number of connections that use this OAM Descriptor.
1.3.6.1.4.1.164.6.2.36.3NodesystemBfd
1.3.6.1.4.1.164.6.2.36.3.2TablebfdSessXTablenot-accessiblecurrentA 'Pseodo-Augment' of the BFD Session table. It is not a 'real augment', as BFD Session table (bfdSessTable) is defined within an adopted draft (BFD-STD-R-MIB)…
1.3.6.1.4.1.164.6.2.36.3.2.1RowbfdSessXEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.36.3.2.1.1ColumnbfdSessXIndexnot-accessiblecurrentThis object represents the BFD Session Index. Based on bfdSessIndex (from BFD-STD-R-MIB).
1.3.6.1.4.1.164.6.2.36.3.2.1.5ColumnbfdSessXStaticAssociatedread-writecurrentThis object determines whether BFD session (neighbor) runs in associated or unassociated mode. In associated mode, static-route state depends on the state of t…
1.3.6.1.4.1.164.6.2.36.3.2.1.6ColumnbfdSessXRemoteDiagread-onlycurrentA diagnostic code specifying the remote system's reason for the last transition of the session from up(4) to some other state.
1.3.6.1.4.1.164.6.2.36.3.2.1.7ColumnbfdSessXClearStatisticsCmdread-writecurrentIndicates a user command to clear all counters in row of specific BFD session.
1.3.6.1.4.1.164.6.2.36.3.2.1.9ColumnbfdSessXDescriptionread-writecurrentBFD session description. By default the agent will set the value equal to bfdSessXIndex.
1.3.6.1.4.1.164.6.2.37ScalaragnDeviceViewread-onlycurrentThis variable denotes the view of the device: Look: old look, new look or new look 2. Material: Plastic or Metal.
1.3.6.1.4.1.164.6.2.38TablebitMappingTablenot-accessiblecurrentThis table maps bits of an octet string to an interface. For ACE-2002 this table is used to map bits of VLAN port lists to LAN VCC's. This table is the opposit…
1.3.6.1.4.1.164.6.2.38.1RowbitMappingEntrynot-accessiblecurrentEach entry in the table describes a correlation of a bit location to an interface. For ACE-2002 - Upon creation of a new LAN VCC the agent will add an entry to…
1.3.6.1.4.1.164.6.2.38.1.1ColumnbitMappingLocationnot-accessiblecurrentThe bit location in an octet string.
1.3.6.1.4.1.164.6.2.38.1.2ColumnbitMappingIndexread-onlycurrentThe interface index or any other index that should be mapped.
1.3.6.1.4.1.164.6.2.39ScalarbitMappingViewread-onlycurrentA view of the bitMappingTable in one object - each entry in the biMappingTable will have the corresponding Bit of this object (bitMappingLocation) = '1'. For A…
1.3.6.1.4.1.164.6.2.40TablehostTablenot-accessiblecurrentHost interface table.
1.3.6.1.4.1.164.6.2.40.1RowhostEntrynot-accessiblecurrentAn entry in the Host Table. The hostParam1, hostParam2, and hostParam3 entries may have different use in different applications.
1.3.6.1.4.1.164.6.2.40.1.1ColumnhostIndexnot-accessiblecurrentThe Host Table Index. This index can have the same value as Host No.
1.3.6.1.4.1.164.6.2.40.1.2ColumnhostIPread-createcurrentThe host interface IP address.
1.3.6.1.4.1.164.6.2.40.1.3ColumnhostIPMaskread-createcurrentThe host interface subnet mask.
1.3.6.1.4.1.164.6.2.40.1.4ColumnhostDefaultNextHopread-createcurrentThe host interface Default Next Hop address.
1.3.6.1.4.1.164.6.2.40.1.5ColumnhostModeread-createcurrentThis parameter represents the Host mode of operation. There can be different values for each application. For example: Not Applicable = 1.
1.3.6.1.4.1.164.6.2.40.1.6ColumnhostParam1read-createcurrentThis parameter represents the first Host parameter. There can be different values for each application. For example: Not Applicable = 1.
1.3.6.1.4.1.164.6.2.40.1.7ColumnhostParam2read-createcurrentThis parameter represents the 2nd Host parameter. There can be different values for each application.
1.3.6.1.4.1.164.6.2.40.1.8ColumnhostParam3read-createcurrentThis parameter represents the 3nd Host parameter. There can be different values for each application.
1.3.6.1.4.1.164.6.2.40.1.9ColumnhostRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.6.2.40.1.10ColumnhostVlanTaggingread-createcurrentHost VLAN support (Tagging). untag - No support of VLAN Tagging. tag - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.6.2.40.1.11ColumnhostVlanIdread-createcurrentHost VLAN ID.
1.3.6.1.4.1.164.6.2.40.1.12ColumnhostVlanPriorityread-createcurrentHost VLAN Frame priority.
1.3.6.1.4.1.164.6.2.41TableinvNameXCTablenot-accessiblecurrentInverse Name XC Table. This table can be used to ease the search for a connection first index by the connection name.
1.3.6.1.4.1.164.6.2.41.1RowinvNameXCEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.41.1.1ColumninvNameXCnot-accessiblecurrentThe unique Connection name, associated to a Cross-Connection.
1.3.6.1.4.1.164.6.2.41.1.2ColumninvNameXCTyperead-onlycurrentThe OBJECT IDENTIFIER of the respective XC Table. Examples: XC Table invNameXCType atmVpCrossConnectTable 1.3.6.1.2.1.37.1.9 atmVcCrossConnectTable 1.3.6.1.2.1…
1.3.6.1.4.1.164.6.2.41.1.3ColumninvNameXCIndexread-onlycurrentThe XC Table (invNameXCType) may include more than one index. This object represents the value of the first XC Index.
1.3.6.1.4.1.164.6.2.42ScalaragnDeviceCapabilitiesread-onlycurrentIndicates the optional capabilities that are implemented by this device and are manageable through this MIB. For each capability 1 BIT is allocated in each Oct…
1.3.6.1.4.1.164.6.2.43TablerowInfoTablenot-accessiblecurrentThis table holds information of other tables.
1.3.6.1.4.1.164.6.2.43.1RowrowInfoEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.43.1.1ColumnrowInfoTableIdnot-accessiblecurrentThe OBJECT IDENTIFIER of the Table, which its information is held by this table (rowInfoTable). Examples: Table Name rowInfoTableId atmTrafficDescrParamTable 1…
1.3.6.1.4.1.164.6.2.43.1.2ColumnrowInfoCounterread-onlycurrentThe Number of rows in the table, indicated by rowInfoTableId.
1.3.6.1.4.1.164.6.2.43.1.3ColumnrowInfoIndexNextread-onlycurrentThe First Free Index of the table, indicated by rowInfoTableId.
1.3.6.1.4.1.164.6.2.43.1.4ColumnrowInfoMaxNoOfRowsread-onlycurrentThe maximum possible number of rows in the table, indicated by rowInfoTableId.
1.3.6.1.4.1.164.6.2.44ScalaragnStoreCmdread-writecurrentStore command. inFlash(3) = store the current Agent configuration in Flash memory. asDefConfigFile(4) = store the current Agent configuration as Default Config…
1.3.6.1.4.1.164.6.2.45TableagnFunctionTablenot-accessiblecurrentThis table is used in order to activate/deactivate device functions. The index indicates the function. Each function can be Enabled or Disabled.
1.3.6.1.4.1.164.6.2.45.1RowagnFunctionEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.45.1.1ColumnagnFunctionnot-accessiblecurrentThis MIB object indicates the function that will be enabled or disabled in the device. alarmForwarding= Fault Propagation (usually towards user port). For Vmux…
1.3.6.1.4.1.164.6.2.45.1.2ColumnagnFunctionActivationread-writecurrentThis MIB object indicates the activation of the current function.
1.3.6.1.4.1.164.6.2.45.1.3ColumnagnFunctionAttributesread-onlycurrentThis MIB object indicates for each supported function its set of attributes. For ETH OAM-CFM: (agnFunction enumeration 8) Bit 0 = '1' denotes that the device s…
1.3.6.1.4.1.164.6.2.45.1.4ColumnagnFunctionVersionread-onlycurrentThis variable is applicable whenever a function is implemented via a software package that resides in the NE. The value saved in this variable contains the pac…
1.3.6.1.4.1.164.6.2.46ScalaragnManagerConfigPortsread-writecurrentThis variable defines from which port/s this manager can manage the device. The value is a sum of 2**n, where n is a bit assigned to a certain port. For RIC-E1…
1.3.6.1.4.1.164.6.2.47ScalaragnEgressRateRangeread-writecurrentThis variable defines the valid ranges of egress rate. For example, for ETX 102: range 1 (2)= 128KBPS - 8MBPS, range 2 (3)= 256KBPS - 16MBPS, range 3 (4)= 512K…
1.3.6.1.4.1.164.6.2.48ScalaragnNoOfCurrentConnsread-onlycurrentThis variable indicates the number of connections currently configured for the agent.
1.3.6.1.4.1.164.6.2.49ScalaragnIngressRateRangeread-writecurrentThis variable defines the valid ranges of ingress rate. For example, for ETX 102: range 1 (2)= 128KBPS - 8MBPS, range 2 (3)= 256KBPS - 16MBPS, range 3 (4)= 512…
1.3.6.1.4.1.164.6.2.50TablealarmForwardingTablenot-accessiblecurrentThe Alarm Forwarding Mechanism will be operated for this table entries.
1.3.6.1.4.1.164.6.2.50.1RowalarmForwardingEntrynot-accessiblecurrentEach entry in this table is a pair of ports that the Alarm Forwarding Mechanism is determined for.
1.3.6.1.4.1.164.6.2.50.1.1ColumnalarmForwardingFailPortnot-accessiblecurrentAn Index of the port on which a fail occurs.
1.3.6.1.4.1.164.6.2.50.1.2ColumnalarmForwardingToPortnot-accessiblecurrentAn Index of the port that will be affected upon the failure of the alarmForwardingFailPort.
1.3.6.1.4.1.164.6.2.50.1.3ColumnalarmForwardingRowStatusread-createcurrentCreation/ Deletion of rows in the table.
1.3.6.1.4.1.164.6.2.50.1.4ColumnalarmForwardingRecoveryTimeread-createcurrentThis parameter defines the maximum time (sec) the affected port will hold the down state.
1.3.6.1.4.1.164.6.2.50.1.5ColumnalarmForwardingGroupConditionsread-createcurrentThis parameter is applicable when there is a group of interfaces in which a fault may occur, and one interface to which alarm is propagated (forwarded). 0 = Al…
1.3.6.1.4.1.164.6.2.50.1.6ColumnalarmForwardingCauseread-createcurrentBit map representing the cause upon which alarm forwarding will take place.
1.3.6.1.4.1.164.6.2.50.1.7ColumnalarmForwardingRecoveryModeread-createcurrentThis parameter determines the Recovery Mode. manual - The user should stop the alarm forwarding by using the alarmForwardingRecoveryCommand. automatic - Alarm …
1.3.6.1.4.1.164.6.2.50.1.8ColumnalarmForwardingRecoveryCommandread-createcurrentThis parameter is a command. It is applicable when alarmForwardingRecoveryMode = manual. on - Will stop alarm forwarding. After setting to 'On', the agent will…
1.3.6.1.4.1.164.6.2.50.1.9ColumnalarmForwardingDelayread-createcurrentThis parameter determines the period of time (in seconds) the alarm of the alarmForwardingFailPort should exist before starting alarm forwarding.
1.3.6.1.4.1.164.6.2.50.1.10ColumnalarmForwardingDirectionread-createcurrentThis parameter determines the Direction of the Alarm Forwarding. unidirectional - alarmForwardingFailPort affects the alarmForwardingToPort. bidirectional - al…
1.3.6.1.4.1.164.6.2.50.1.11ColumnalarmForwardingActionread-createcurrentBit map representing actions to be taken on the entity set in alarmForwardingToPort, when alarm is propagated from the entity set in alarmForwardingFromPort. B…
1.3.6.1.4.1.164.6.2.50.1.12ColumnalarmForwardingActiveCauseread-onlycurrentBit map representing the cause for the current active forwarding entry. When this forwarding entry is not active, the value will be: 0.
1.3.6.1.4.1.164.6.2.50.1.13ColumnalarmForwardingDescrread-createcurrentDescription of the current forwarding entry. Default description will be: ' '
1.3.6.1.4.1.164.6.2.50.1.14ColumnalarmForwardingPriorityDecrementread-createcurrentThe amount by which to decrement the priority of the VRRP group the fault is propagated to. If this object is higher than the VRRP group priority, the priority…
1.3.6.1.4.1.164.6.2.51ScalaragnSwVersionSwapCmdread-writecurrentSW switch command. mainAndBackup (3) = Swap between Main SW and the backup one. Agent will perform the required command and change automatically the value of t…
1.3.6.1.4.1.164.6.2.53ScalaragnMaxNoOfConnsread-onlycurrentThis variable indicates the maximum number of connections that can be configured for the agent.
1.3.6.1.4.1.164.6.2.56TableagnGroupTablenot-accessiblecurrentA table that enables associating components to Group/s (or removing components of a group). The Group Idx can then be used in other tables (e.g alarmForwarding…
1.3.6.1.4.1.164.6.2.56.1RowagnGroupEntrynot-accessiblecurrentAn entry in the agnGroupTable.
1.3.6.1.4.1.164.6.2.56.1.1ColumnagnGroupCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. For devices supporting more than one group type ,the valu…
1.3.6.1.4.1.164.6.2.56.1.2ColumnagnGroupIdxnot-accessiblecurrentThis object indicates a unique Group Index.
1.3.6.1.4.1.164.6.2.56.1.3ColumnagnGroupComponentIdxnot-accessiblecurrentThis object indicates a unique Component Index that belongs to the Group defined by agnGroupIdx. When agnGroupCnfgIdx=2 (Policer Aggregate), when creating a ne…
1.3.6.1.4.1.164.6.2.56.1.4ColumnagnGroupRowStatusread-createcurrentThis object enables user to create/delete entries of this table. destroy - If a Group is used in another table, Agent may not allow destroying the entry/ies th…
1.3.6.1.4.1.164.6.2.56.1.5ColumnagnGroupNameread-createcurrentThe name of the group. Device should check that this name is unique.
1.3.6.1.4.1.164.6.2.56.1.6ColumnagnGroupParamread-createcurrentWhen agnGroupCnfgIdx=2 (Policer Aggregate),this attribute contains the Policer Profile that is related to this Policer Aggregate group (bwProfileIndex from MEF…
1.3.6.1.4.1.164.6.2.56.1.7ColumnagnGroupStatusread-onlycurrentFor Vmux family: When agnGroupCnfgIdx=3 (Vmux Bundles Group), this attribute contains the MAX Bandwidth (since device last reset) that was used in the Bundles …
1.3.6.1.4.1.164.6.2.56.1.8ColumnagnGroupStatus2read-onlycurrentFor Vmux family: When agnGroupCnfgIdx=3 (Vmux Bundles Group), this attribute contains the Average Bandwidth (since device last reset) that was used in the Bund…
1.3.6.1.4.1.164.6.2.56.1.9ColumnagnGroupComponentStringread-createcurrentThis objects indicate a Component string. When agnGroupCnfgIdx=4 (Trap Synchronization), this object indicates the Name of the trap destination, where: - For S…
1.3.6.1.4.1.164.6.2.56.1.10ColumnagnGroupComponentTDomainread-createcurrentThis object indicates the type of Transport Service contained in agnGroupComponentTAddress.
1.3.6.1.4.1.164.6.2.56.1.11ColumnagnGroupComponentTAddressread-createcurrentThis object indicates the Component's Transport Service Address. The format of this address depends on agnGroupComponentTDomain value.
1.3.6.1.4.1.164.6.2.57ScalaragnStatNoOfUploadedIntervalsread-onlycurrentThis parameter indicates the Number of Intervals that were successfully collected and uploaded in the last statistics collection session.
1.3.6.1.4.1.164.6.2.58NodeagnSyslog
1.3.6.1.4.1.164.6.2.58.1ScalaragnSyslogDeviceUdpPortread-writecurrentThe UDP Port of the device, from which Syslog messages are sent. Default=514.
1.3.6.1.4.1.164.6.2.58.2ScalaragnSyslogFacilityread-writecurrentA user defined SW module, task or function, from which Syslog messages are sent to the remote Server.
1.3.6.1.4.1.164.6.2.58.3ScalaragnSyslogSeverityLevelread-writecurrentDevice will send events equal or exceeding this severity level (configured by user). emergency (0), Emergency messages alert (1), Critical alarms critical (2),…
1.3.6.1.4.1.164.6.2.58.4ScalaragnSyslogCmdread-writecurrentThis variable represents Syslog possible commands. After the Agent accepts a command, it will automatically change the value to off(2).
1.3.6.1.4.1.164.6.2.59ScalaragnNetworkInterfaceTyperead-writecurrentThis MIB object indicates the network interface type to be used by the device. It is used for devices that use only one network port type.
1.3.6.1.4.1.164.6.2.60ScalaragnTrapDelayread-writecurrentThis variable enables the user to set a delay (in seconds) before a trap is sent. This delay will be used only for traps that need to be sent during device ini…
1.3.6.1.4.1.164.6.2.61NodetrapManagement
1.3.6.1.4.1.164.6.2.61.1NodetrapMngVars
1.3.6.1.4.1.164.6.2.61.1.1ScalartrapStateaccessible-for-notifycurrentState of current trap (sent within a trap).
1.3.6.1.4.1.164.6.2.61.1.2ScalartrapSeqIdaccessible-for-notifycurrentSequence ID of current trap (sent within a trap).
1.3.6.1.4.1.164.6.2.61.2NodealarmSync
1.3.6.1.4.1.164.6.2.61.2.0NodealarmSyncEvents
1.3.6.1.4.1.164.6.2.61.2.0.1NotificationhardSyncTrapcurrentThis trap is sent whenever Hard Synchronization process starts or ends (Hard Synchronization retrieves current status of Agent).
1.3.6.1.4.1.164.6.2.61.2.1TablealarmSyncTablenot-accessiblecurrentThis table includes Alarm Synchronization information for each Logical Group of managers.
1.3.6.1.4.1.164.6.2.61.2.1.1RowalarmSyncEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.61.2.1.1.1ColumnalarmSyncGroupIdnot-accessiblecurrentA unique Logical Group ID, which represents a group of managers.
1.3.6.1.4.1.164.6.2.61.2.1.1.2ColumnalarmSyncLastSentSeqIdread-onlycurrentLast Sequence ID of trap that is sent to this Logical Group of managers.
1.3.6.1.4.1.164.6.2.61.2.1.1.3ColumnalarmSyncCmdread-writecurrentInitates an Alarm Synchronization request for this Logical Group of managers. softSync(2) - sends Soft Synchronization request, in order to synchronize missing…
1.3.6.1.4.1.164.6.2.61.2.1.1.4ColumnalarmSyncStartSeqIdread-writecurrentFirst Sequence ID of Soft Synchronization request for this Logical Group of managers. Soft Synchronization request is sent for a range of Sequence IDs. This ob…
1.3.6.1.4.1.164.6.2.61.2.1.1.5ColumnalarmSyncEndSeqIdread-writecurrentLast Sequence ID of Soft Synchronization request for this Logical Group of managers. Soft Synchronization request is sent for a range of Sequence IDs. This obj…
1.3.6.1.4.1.164.6.2.62TableagnStringToIndexTablenot-accessiblecurrentThis table holds the conversions of tables from unique String to numeric index.
1.3.6.1.4.1.164.6.2.62.1RowagnStringToIndexEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.62.1.1ColumnagnStringToIndexTableIdnot-accessiblecurrentThe OBJECT IDENTIFIER of the Table, having as index numeric values. In this table, the value of agnStringToIndexUserName is an attribute.
1.3.6.1.4.1.164.6.2.62.1.2ColumnagnStringToIndexUserNamenot-accessiblecurrentThis object indicates a unique name used by agnStringToIndexTableId, although it is not it's index.
1.3.6.1.4.1.164.6.2.62.1.3ColumnagnStringToIndexTableIndexread-onlycurrentThe numeric Index of agnStringToIndexTableId.
1.3.6.1.4.1.164.6.2.63TableagnRowPointerTablenot-accessiblecurrentThis table holds information about a specific entry in a table. For example, number of usages of this row.
1.3.6.1.4.1.164.6.2.63.1RowagnRowPointerEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.63.1.1ColumnagnRowPointerIndexnot-accessiblecurrentThe OBJECT IDENTIFIER of an entry in a table.
1.3.6.1.4.1.164.6.2.63.1.2ColumnagnRowPointerNoOfUsagesread-onlycurrentThe number of usages of specific entry in a table, which is pointed by agnRowPointerIndex.Usually, when the value of this counter is greater than 0,the entry c…
1.3.6.1.4.1.164.6.2.64ScalaragnConfigVersionread-onlycurrentASCII string of the Configuration Version.
1.3.6.1.4.1.164.6.2.65NodeagnResources
1.3.6.1.4.1.164.6.2.65.1TableagnMemoryBufferTablenot-accessiblecurrentThis table holds information about system memory buffers.
1.3.6.1.4.1.164.6.2.65.1.1RowagnMemoryBufferEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.65.1.1.1ColumnagnMemoryBufferPoolIndexnot-accessiblecurrentThis object defines a buffer pool index.
1.3.6.1.4.1.164.6.2.65.1.1.2ColumnagnMemoryBufferNameread-onlycurrentThis object defines the name of the specific pool.
1.3.6.1.4.1.164.6.2.65.1.1.3ColumnagnMemoryBufferTotalNumread-onlycurrentThe total number of buffers in the specific pool.
1.3.6.1.4.1.164.6.2.65.1.1.4ColumnagnMemoryBufferFreeread-onlycurrentThe number of free buffers in the specific pool.
1.3.6.1.4.1.164.6.2.65.1.1.5ColumnagnMemoryBufferSizeread-onlycurrentThe size (in Bytes) of each buffer of this pool.
1.3.6.1.4.1.164.6.2.65.1.1.6ColumnagnMemoryBufferAllocErrorsread-onlycurrentNumber of errors occurred when trying to return buffer to this pool.
1.3.6.1.4.1.164.6.2.65.1.1.7ColumnagnMemoryBufferFreeErrorsread-onlycurrentNumber of errors occurred when trying to get buffer from this pool.
1.3.6.1.4.1.164.6.2.65.2TableagnCpuUtilizationTablenot-accessiblecurrentThis table holds information about CPU utilization per task.
1.3.6.1.4.1.164.6.2.65.2.1RowagnCpuUtilizationEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.65.2.1.1ColumnagnCpuUtilizationCpuIdxnot-accessiblecurrentThis object defines the CPU index that is monitored. If only one CPU exists,the value will always be 1.
1.3.6.1.4.1.164.6.2.65.2.1.2ColumnagnCpuUtilizationTaskIdxnot-accessiblecurrentThis object defines the task index that is monitored . When it equals to 2^32-1 ,it represents all the monitored tasks in the system.
1.3.6.1.4.1.164.6.2.65.2.1.3ColumnagnCpuUtilizationCurrentread-onlycurrentCurrent CPU usage of a specific task in %. When agnCpuUtilizationTaskIdx equals to 2^32-1, it holds the current CPU utilization for all tasks.
1.3.6.1.4.1.164.6.2.65.2.1.4ColumnagnCpuUtilizationMinread-onlycurrentMinimum CPU usage of a specific task in % from the last reset that has been executed ,for example, by using agnCpuUtilizationClear command or systemReset. When…
1.3.6.1.4.1.164.6.2.65.2.1.5ColumnagnCpuUtilizationMaxread-onlycurrentMaximum CPU usage of a specific task in % from the last reset that has been executed ,for example, by using agnCpuUtilizationClear command or systemReset. When…
1.3.6.1.4.1.164.6.2.65.2.1.6ColumnagnCpuUtilizationClearread-writecurrentReset action of the CPU utilization counters(except agnCpuUtilizationCurrent). After setting the command to 'on' , the device returns it to 'off' automatically…
1.3.6.1.4.1.164.6.2.65.2.1.7ColumnagnCpuUtilizationAverageread-onlycurrentAverage CPU usage of a specific task in % from the last reset that has been executed ,for example, by using agnCpuUtilizationClear command or systemReset. When…
1.3.6.1.4.1.164.6.2.65.3TableagnDiskResourcesTablenot-accessiblecurrentThis table holds information about device disk(s).
1.3.6.1.4.1.164.6.2.65.3.1RowagnDiskResourcesEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.65.3.1.1ColumnagnDiskIdxnot-accessiblecurrentThe disk index. The index is equals to 1, even device uses more than one disk.
1.3.6.1.4.1.164.6.2.65.3.1.2ColumnagnDiskTotalSpaceread-onlycurrentTotal disk space in kbytes. If the device uses more than one disk the object shall contain the minimal value.
1.3.6.1.4.1.164.6.2.65.3.1.3ColumnagnDiskAvailableSpaceread-onlycurrentAvailable disk space in kbytes. If the device uses more than one disk the object shall contain the minimal value.
1.3.6.1.4.1.164.6.2.65.4TablesystemResourcesTablenot-accessiblecurrentThis table provides information on system resources.
1.3.6.1.4.1.164.6.2.65.4.1RowsystemResourcesEntrynot-accessiblecurrentThis table has a single row entry and provides information related to system resources.
1.3.6.1.4.1.164.6.2.65.4.1.1ColumnsystemResourceIdnot-accessiblecurrentsystemResourceId = 1.
1.3.6.1.4.1.164.6.2.65.4.1.2ColumnsystemResourceLastErrorread-onlycurrentResource Last Error.
1.3.6.1.4.1.164.6.2.65.5TablememoryUsageTablenot-accessiblecurrentThis table monitors memory usage of various elements of the agent.
1.3.6.1.4.1.164.6.2.65.5.1RowmemoryUsageEntrynot-accessiblecurrentEach row contains memory usage-related parameters of one memory pool. Rows are added and removed by the agent and the information they contain is read-only.
1.3.6.1.4.1.164.6.2.65.5.1.1ColumnmemoryUsageEntityIdnot-accessiblecurrentA numeric value representing the entity the row contains information on. If this is a slot, the same values as in the SlotType TC are used. The special value o…
1.3.6.1.4.1.164.6.2.65.5.1.2ColumnmemoryUsagePoolIdnot-accessiblecurrentAn ID that identifies the memory pool the row contains information on. If an entity contains multiple pools, they are represented in separate rows with the sam…
1.3.6.1.4.1.164.6.2.65.5.1.3ColumnmemoryUsagePoolNameread-onlycurrentA human-readable description of the memory pool.
1.3.6.1.4.1.164.6.2.65.5.1.4ColumnmemoryUsageTotalread-onlycurrentTotal amount of memory (in KBytes) allocated to the pool. This is equivalent to the sum of used and free memory.
1.3.6.1.4.1.164.6.2.65.5.1.5ColumnmemoryUsageFreeread-onlycurrentAmount of memory (in KBytes) allocated to the pool, but not used.
1.3.6.1.4.1.164.6.2.65.5.1.6ColumnmemoryUsageApplicAllocCounterread-onlycurrentNumber of times the pool asked the OS application for memory allocation.
1.3.6.1.4.1.164.6.2.65.5.1.7ColumnmemoryUsageApplicFreeCounterread-onlycurrentNumber of times the pool freed memory to the OS application.
1.3.6.1.4.1.164.6.2.65.5.1.8ColumnmemoryUsageApplicMaxUsedread-onlycurrentHighest amount of memory (in KBytes) ever used by the pool.
1.3.6.1.4.1.164.6.2.65.5.1.9ColumnmemoryUsageApplicAllocSizeread-onlycurrentSum of memory allocations (in Bytes) the pool has ever received.
1.3.6.1.4.1.164.6.2.65.5.1.10ColumnmemoryUsageApplicFreedSizeread-onlycurrentSum of memory allocations (in Bytes) the pool has ever freed.
1.3.6.1.4.1.164.6.2.66TableentityConvertIndexTablenot-accessiblecurrentThis table holds information about converted indexes of entities that have more than one index. The original indexes can be each, up to Unsigned32 value, thoug…
1.3.6.1.4.1.164.6.2.66.1RowentityConvertIndexEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.66.1.1ColumnentityConvertEntityTypenot-accessiblecurrentThis object defines the type of entity that its indexes are converted to one index using this table.
1.3.6.1.4.1.164.6.2.66.1.2ColumnentityConvertIndexnot-accessiblecurrentThe converted index. For each device, the valid range of the converted index should not conflict with ifIndex values of the device's interfaces .
1.3.6.1.4.1.164.6.2.66.1.3ColumnentityConvertRowStatusread-createcurrentThis object enables to create/delete entries of this table.
1.3.6.1.4.1.164.6.2.66.1.4ColumnentityConvertParam1read-createcurrentFirst original index of the entity.
1.3.6.1.4.1.164.6.2.66.1.5ColumnentityConvertParam2read-createcurrentSecond original index of the entity.
1.3.6.1.4.1.164.6.2.66.1.6ColumnentityConvertParam3read-createcurrentThird original index of the entity.
1.3.6.1.4.1.164.6.2.66.1.7ColumnentityConvertParam4read-createcurrentForth original index of the entity.
1.3.6.1.4.1.164.6.2.66.1.8ColumnentityConvertParam5read-createcurrentFifth original index of the entity.
1.3.6.1.4.1.164.6.2.67NodeagnFiles
1.3.6.1.4.1.164.6.2.67.1TablefileSystemTablenot-accessiblecurrentThe File System Table.
1.3.6.1.4.1.164.6.2.67.1.1RowfileSystemEntrynot-accessiblecurrentAn entry in the File System Table.
1.3.6.1.4.1.164.6.2.67.1.1.1ColumnfileSystemPathnot-accessiblecurrentThis object represents the path to the location of the file. The length of the path is limited to 64 octets.
1.3.6.1.4.1.164.6.2.67.1.1.2ColumnfileSystemObjTypenot-accessiblecurrentThis object represents the Object's Type.
1.3.6.1.4.1.164.6.2.67.1.1.3ColumnfileSystemObjNamenot-accessiblecurrentThis object represents the name of the file. The length of the name is limited to 32 octets.
1.3.6.1.4.1.164.6.2.67.1.1.4ColumnfileSystemRowStatusread-createcurrentThis object enables the user to create/delete entries in this table.
1.3.6.1.4.1.164.6.2.67.1.1.5ColumnfileSystemSignatureBootread-onlycurrentThe value saved in this variable is: If the copied file is from the NE's file system it is the value of fileSystemSignatureBoot of the copied file. Otherwise (…
1.3.6.1.4.1.164.6.2.67.1.1.6ColumnfileSystemSignatureTimeread-onlycurrentMeasurement units: Seconds. The value saved in this variable is the value of fileSystemSignatureTime of the copied file. For Running configuration file: The va…
1.3.6.1.4.1.164.6.2.67.1.1.7ColumnfileSystemLastUpdateTimeread-onlycurrentIf the NE does not support a real-time clock, or, if from any other reason the UTC time is not known, this variable must be set to zero (eight octets with the …
1.3.6.1.4.1.164.6.2.67.1.1.8ColumnfileSystemLastUpdateBootSignatureread-onlycurrentThe variable denotes the value of snmpEngineBoots when the file has been updated.
1.3.6.1.4.1.164.6.2.67.1.1.9ColumnfileSystemLastUpdateTimeSignatureread-onlycurrentUnits: seconds. The variable denotes the value of snmpEngineTime when the file has been updated.
1.3.6.1.4.1.164.6.2.67.1.1.10ColumnfileSystemFileSizeread-onlycurrentFile size in bytes.
1.3.6.1.4.1.164.6.2.67.1.1.11ColumnfileSystemValidIndicationread-onlycurrentThe variable indicates if the file is valid, or, specifies invalidity reason. Each bit indicate a status or possible error that occurred: runningError (0) - an…
1.3.6.1.4.1.164.6.2.67.2ScalarfileChangeStatusread-onlycurrentThis variable indicates changes in configuration files. Indication exists when a value of '1' exists in the corresponding bit.
1.3.6.1.4.1.164.6.2.67.3TableconfigLoadTablenot-accessiblecurrentThe purpose of this table is to gather the parameters used in the process of loading configuration files to the NE.
1.3.6.1.4.1.164.6.2.67.3.1RowconfigLoadEntrynot-accessiblecurrentAn entry in the Config Load Table.
1.3.6.1.4.1.164.6.2.67.3.1.1ColumnconfigLoadIndexnot-accessiblecurrentAn index in the Config Load Table.
1.3.6.1.4.1.164.6.2.67.3.1.2ColumnconfigLoadConfirmReqread-writecurrentThis variable denotes if after next reboot startup-config requires manager confirmation. After reboot the agent must set the value to off (2).
1.3.6.1.4.1.164.6.2.67.3.1.3ColumnconfigLoadConfirmConfread-writecurrentThis variable is used for confirming startup-config. It is applicable only when configLoadConfirmReq is set to on(3). If reboot is completed and startup-config…
1.3.6.1.4.1.164.6.2.67.3.1.4ColumnconfigLoadConfirmTimerread-writecurrentThis variable denotes the time in seconds to wait for confirmation (after reboot). It is applicable only when configLoadConfirmReq is set to on(3).
1.3.6.1.4.1.164.6.2.67.3.1.5ColumnconfigLoadRollbackFilePathread-writecurrentThis variable denotes the path of the file to be copied to rollback-config file when configLoadConfirmReq is set to on(3).
1.3.6.1.4.1.164.6.2.67.3.1.6ColumnconfigLoadRollbackFileNameread-writecurrentThis variable denotes the name of the file to be copied to rollback-config file when configLoadConfirmReq is set to on(3).
1.3.6.1.4.1.164.6.2.67.3.1.7ColumnconfigLoadErrorPolicyread-writecurrentThis variable denotes the policy to be carried out in case that an error has occurred while loading or executing the file: stop (1) - stop upon first encounter…
1.3.6.1.4.1.164.6.2.67.3.1.8ColumnconfigLoadObjTyperead-onlycurrentThis variable denotes the configuration file that was loaded after reboot. The value saved is the file type, as defined in fileSystemObjType.
1.3.6.1.4.1.164.6.2.67.3.1.9ColumnconfigLoadZtcStartupConfigVersionread-onlycurrentThis variable denotes the version of last startup config file loaded by Zero Touch Configuration mechanism.
1.3.6.1.4.1.164.6.2.68TableagnErrorMessageTablenot-accessiblecurrentThis table holds Agent error messages,caused by last SNMP Set operation/s. For each SNMP Set fail response,Agent will report a relevant error message.
1.3.6.1.4.1.164.6.2.68.1RowagnErrorMessageEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.68.1.1ColumnagnErrorMessageSeqIdnot-accessiblecurrentThis object is the Sequence ID of the response PDU (Set Response PDU that announced the SNMP failure), or any other message ID that will be generated by Agent.…
1.3.6.1.4.1.164.6.2.68.1.2ColumnagnErrorMessageread-onlycurrentThis object defines the string of the error message.
1.3.6.1.4.1.164.6.2.70NodeagnCapabilities
1.3.6.1.4.1.164.6.2.70.1ScalaragnCommonCapabilitiesread-onlycurrentThis object indicates common capabilities that this Agent can support. These capabilities may not be active (reasons may be for example, lack of relevant HW, l…
1.3.6.1.4.1.164.6.2.70.2ScalaragnCommonFeatureAvailabilityread-onlycurrentThis object denotes for each feature that is supported by the NE (denoted in agnCommonCapabilities) if it is available (enabled, license valid etc). The purpos…
1.3.6.1.4.1.164.6.2.71NodeagnThreshold
1.3.6.1.4.1.164.6.2.71.1TableagnThresholdTablenot-accessiblecurrentThe list of card/device agent Threshold.
1.3.6.1.4.1.164.6.2.71.1.1RowagnThresholdEntrynot-accessiblecurrentThreshold table is used to define any type of threshold, like temperature or power.
1.3.6.1.4.1.164.6.2.71.1.1.1ColumnagnThresholdIdxnot-accessiblecurrentThis object defines the index of the Threshold Table. For temperature objects, the device shall support steadyState (2) threshold. For system power-in the inde…
1.3.6.1.4.1.164.6.2.71.1.1.2ColumnagnThresholdUomread-writecurrentThis object defines the Unit Of Measure like Celsius, Fahrenheit, Millivolt etcetera. For temperature threshold, the device shall work internally in Celsius an…
1.3.6.1.4.1.164.6.2.71.1.1.3ColumnagnThresholdMinread-writecurrentThis object define the Minimum threshold
1.3.6.1.4.1.164.6.2.71.1.1.4ColumnagnThresholdMaxread-writecurrentThis object define the Maximum threshold
1.3.6.1.4.1.164.6.2.71.1.1.5ColumnagnThresholdHysteresisread-writecurrentThis object defines a range value of a state transition around a Minimum or Maximum threshold. Upon threshold crossing, an Alarm will be sent Once if the curre…
1.3.6.1.4.1.164.6.2.71.1.1.6ColumnagnThresholdCurrentread-onlycurrentThis object define the current Actual value
1.3.6.1.4.1.164.6.2.72NodeagnProtection
1.3.6.1.4.1.164.6.2.73NodeagnLicense
1.3.6.1.4.1.164.6.2.74NodeagnPerformanceManagement
1.3.6.1.4.1.164.6.2.75NodeagnConfigChange
1.3.6.1.4.1.164.6.2.76NodeagnLldp
1.3.6.1.4.1.164.6.2.76.1TableagnLldpTablenot-accessiblecurrentLLDP table. Contains scalars that operate at device level.
1.3.6.1.4.1.164.6.2.76.1.1RowagnLldpEntrynot-accessiblecurrentAn entry in the LLDP table.
1.3.6.1.4.1.164.6.2.76.1.1.1ColumnlldpIndexnot-accessiblecurrentA dummy index. Has a fixed value of 1.
1.3.6.1.4.1.164.6.2.76.1.1.2ColumnlldpAdminStatusread-writecurrentEnable or Disable the LLDP status.
1.3.6.1.4.1.164.6.2.76.1.1.3ColumnlldpSysBridgeTyperead-writecurrentThe bridge type of the system. The LLDP protocol frames, matched the defined by this parameter bridge type, will be forwarded to the LLDP control process, that…
1.3.6.1.4.1.164.6.2.78ScalaragnPanelTyperead-onlycurrentThis object identify the device panel. For ETX-36: Panel number agnPanelType k-32-41-00-m483 483 k-32-41-00-m484 484 k-32-41-00-m488 488 42.11.10.17 17.00 42.1…
1.3.6.1.4.1.164.6.2.81NodeagnScalarObjects
1.3.6.1.4.1.164.6.2.81.1ScalaragnDscpread-writecurrentThe DSCP value of any management applications traffic generated by the device.
1.3.6.1.4.1.164.6.4NoderadTransport
1.3.6.1.4.1.164.6.4.1NoderadTransportDomains
1.3.6.1.4.1.164.6.4.1.1IdentityradTransportDomainSnmpEfmOamcurrentThe SNMP over EFM OAM transport domain. The corresponding transport address is of type RadTransportAddressEfmOam for EFM OAM addresses (port).
1.3.6.1.4.1.164.6.5NodefmObjects
1.3.6.1.4.1.164.6.5.1NodealarmEventConfig
1.3.6.1.4.1.164.6.5.1.1TablealarmEventAttrTablenot-accessiblecurrentA table that lists the set of Attributes per possible alarm and event.
1.3.6.1.4.1.164.6.5.1.1.1RowalarmEventAttrEntrynot-accessiblecurrentAn entry appears in this table for each possible alarm and event. This table MUST be persistent upon system reboot.
1.3.6.1.4.1.164.6.5.1.1.1.1ColumnalarmEventAttrIndexnot-accessiblecurrentThe table index unique identifier of the alarm or the event.
1.3.6.1.4.1.164.6.5.1.1.1.2ColumnalarmEventAttrSourceTypenot-accessiblecurrentThis is the Source Type of alarm or event.
1.3.6.1.4.1.164.6.5.1.1.1.3ColumnalarmEventAttrNameread-onlycurrentA name of up to 32 characters.
1.3.6.1.4.1.164.6.5.1.1.1.4ColumnalarmEventAttrDescriptionread-onlycurrentThe description of the current alarm or event as ASCII string. The details of the formatted description string is defined in the user-manual document.
1.3.6.1.4.1.164.6.5.1.1.1.5ColumnalarmEventAttrDefaultSeverityread-onlycurrentThis variable applies for alarms only. It denotes the default severity assigned to the alarm.
1.3.6.1.4.1.164.6.5.1.1.1.6ColumnalarmEventAttrDefaultMaskingread-onlycurrentThis variable applies for alarms only. It denotes the default masking assigned to the alarm.
1.3.6.1.4.1.164.6.5.1.1.1.7ColumnalarmEventAttrThresholdSupportread-onlycurrentThis variable denotes whether a threshold is supported in the current Event.
1.3.6.1.4.1.164.6.5.1.1.1.8ColumnalarmEventAttrAssociatedNotificationread-onlycurrentThe NOTIFICATION-TYPE object identifier of the alarm or event. If there is no notification associated with this alarm, the value of this object MUST be '0.0'.
1.3.6.1.4.1.164.6.5.1.2TableactiveAlarmTablenot-accessiblecurrentA table of Active Alarms entries.
1.3.6.1.4.1.164.6.5.1.2.1RowactiveAlarmEntrynot-accessiblecurrentEntries appear in this table when alarms are raised. They are removed when the alarm is cleared.
1.3.6.1.4.1.164.6.5.1.2.1.1ColumnactiveAlarmSourceIdnot-accessiblecurrentThis object identifies the specific managed object that caused the alarm.
1.3.6.1.4.1.164.6.5.1.2.1.2ColumnactiveAlarmIndexnot-accessiblecurrentThis is a global running index.
1.3.6.1.4.1.164.6.5.1.2.1.3ColumnactiveAlarmDateAndTimeread-onlycurrentThis variable denotes the date in which the alarm has been raised. If the NE implements a real-time clock, this variable MUST hold the UTC time. If the NE does…
1.3.6.1.4.1.164.6.5.1.2.1.4ColumnactiveAlarmIdread-onlycurrentThis object identifies the ID of the raised alarm.
1.3.6.1.4.1.164.6.5.1.2.1.5ColumnactiveAlarmDescriptionread-onlycurrentASCII String specifiying the details of the Active Alarm.
1.3.6.1.4.1.164.6.5.1.2.1.6ColumnactiveAlarmSourceTyperead-onlycurrentThis is the Source Type of the active alarm.
1.3.6.1.4.1.164.6.5.1.2.1.7ColumnactiveAlarmSeverityread-onlycurrentThis object identifies the severity of the raised alarm. Notes: 1. The severity of the alarm in the Active Alarm table may be different from the severity confi…
1.3.6.1.4.1.164.6.5.1.2.1.8ColumnactiveAlarmMaskingread-onlycurrentThis object identifies the alarm and event masking on various reporting means.
1.3.6.1.4.1.164.6.5.1.2.1.9ColumnactiveAlarmSourceNameread-onlycurrentASCII String specifying the name of the source referenced by alarmEventLogSourceId. The syntax will be similar to CLI. Example: E1 2/4 where E1 is the source t…
1.3.6.1.4.1.164.6.5.1.3ScalaractiveAlarmRebuildread-writecurrentWhen the manager sets the value of this variable to activate (3), the application recollects all the active alarms from I/O cards or other entities and sets th…
1.3.6.1.4.1.164.6.5.1.4TablealarmEventConfigTablenot-accessiblecurrentThis table enables user defined policy per specific Source ID of an alarm or event.
1.3.6.1.4.1.164.6.5.1.4.1RowalarmEventConfigEntrynot-accessiblecurrentEntry containing user configuration for a specific alarm or event.
1.3.6.1.4.1.164.6.5.1.4.1.1ColumnalarmEventConfigIdnot-accessiblecurrentAlarm and Event ID. Note: In order to apply a policy for all alarms/events on current source ID or source type, this object should be set to the following acco…
1.3.6.1.4.1.164.6.5.1.4.1.2ColumnalarmEventConfigSourceTypenot-accessiblecurrentThis is the Source Type of alarm or event.
1.3.6.1.4.1.164.6.5.1.4.1.3ColumnalarmEventConfigSourceIdnot-accessiblecurrentSource ID. This object identifies the specific managed object that causes the alarm. Note: In order to apply a policy to all Source IDs of the same Source Type…
1.3.6.1.4.1.164.6.5.1.4.1.4ColumnalarmEventConfigSeverityread-createcurrentFor alarms: values will be one of: critical (3), major (4), minor (5). For events: value must be warning (6).
1.3.6.1.4.1.164.6.5.1.4.1.5ColumnalarmEventConfigMaskingread-createcurrentThis variable enables alarm and event masking on various reporting means.
1.3.6.1.4.1.164.6.5.1.4.1.6ColumnalarmEventConfigRowStatusread-createcurrentEnable rows creation/deletion. This is used for managed objects that are dynamically created or removed.
1.3.6.1.4.1.164.6.5.1.4.1.7ColumnalarmEventConfigSourceNameread-onlycurrentASCII String specifying the name of the source referenced by alarmEventLogSourceId. The syntax will be similar to CLI. Example: E1 2/4 where E1 is the source t…
1.3.6.1.4.1.164.6.5.1.5ScalaralarmEventLogClearread-writecurrentSetting the variable to clearAll(3) removes all entries from all the log tables. Setting the variable to clearLog (4) removes all entries from the alarmEventLo…
1.3.6.1.4.1.164.6.5.1.6TablemaskReportTablenot-accessiblecurrentThis table enables masking alarms on various reporting means.
1.3.6.1.4.1.164.6.5.1.6.1RowmaskReportEntrynot-accessiblecurrentEach entry in this table contains a masking severity per reporting means. The masking policy for a higher severity level enforces the policy for all lower seve…
1.3.6.1.4.1.164.6.5.1.6.1.1ColumnmaskReportTypenot-accessiblecurrentThis variable enables alarm and event masking on various reporting means. Note that the Textual Convention is not used here. Reason: Some bit Combinations are …
1.3.6.1.4.1.164.6.5.1.6.1.2ColumnmaskReportSeverityread-writecurrentThis object MUST be one of the following values that are defined in the TC AlarmSeverity: critical(3) major(4) minor(5) warning (6) or noMask (255) value that …
1.3.6.1.4.1.164.6.5.1.7ScalaralarmLedMinSeverityread-writecurrentThis scalar is relevant only for devices with only one Alarm LED. It enables configuration of the minimum alarm severity upon which to turn on the alarm led. L…
1.3.6.1.4.1.164.6.5.1.8TablealarmEventConvertNameToIdTablenot-accessiblecurrentA table that Converts the Name of an alarm or event to its ID.
1.3.6.1.4.1.164.6.5.1.8.1RowalarmEventConvertNameToIdEntrynot-accessiblecurrentAn entry appears in this table for each possible alarm and event. This table MUST be persistent upon system reboot.
1.3.6.1.4.1.164.6.5.1.8.1.1ColumnalarmEventConvertNameread-onlycurrentA name of up to 30 characters.
1.3.6.1.4.1.164.6.5.1.8.1.2ColumnalarmEventConvertSourceTypenot-accessiblecurrentThis is the Source Type of alarm or event.
1.3.6.1.4.1.164.6.5.1.8.1.3ColumnalarmEventConvertIdnot-accessiblecurrentThe table index unique identifier of the alarm or the event.
1.3.6.1.4.1.164.6.5.1.9TablealarmRelayInputTablenot-accessiblecurrentThis table enables configuration and status of Alarm Input Relay Cards or chassis. Examples for input relays: temperature sensor or alert system.
1.3.6.1.4.1.164.6.5.1.9.1RowalarmRelayInputEntrynot-accessiblecurrentEntry containing user configuration for a specific alarm Input Relay.
1.3.6.1.4.1.164.6.5.1.9.1.1ColumnalarmRelayInputRelayIndexnot-accessiblecurrentThis object is the index of the Alarm Relay. Values: 1- critical, 2- major, 3- minor according to alarm severity. For devices that have only one alarm output t…
1.3.6.1.4.1.164.6.5.1.9.1.2ColumnalarmRelayInputDescriptionread-writecurrentThe Descriptions of the alarm relay. The default descriptions will be one of: Alarm Input 1, Alarm Input 2, Alarm Input 3, Alarm Input 4 etc. according to the …
1.3.6.1.4.1.164.6.5.1.9.1.3ColumnalarmRelayInputActiveStateread-writecurrentThis object shows the Active State voltage. The value of none (3) means that the Alarm Input is inactive. Default state of alarm input is none (3).
1.3.6.1.4.1.164.6.5.1.9.1.4ColumnalarmRelayInputOperStateread-onlycurrentThis object shows the operational state of the alarm relay.
1.3.6.1.4.1.164.6.5.1.10TablealarmRelayOutputTablenot-accessiblecurrentThis table enables configuration of Alarm Output Relay Cards or chassis. Example for output relay: alarm siren.
1.3.6.1.4.1.164.6.5.1.10.1RowalarmRelayOutputEntrynot-accessiblecurrentEntry containing user configuration and status for a specific alarm Output Relay.
1.3.6.1.4.1.164.6.5.1.10.1.1ColumnalarmRelayOutputRelayIndexnot-accessiblecurrentThis object is the index of the Alarm Relay. Values: 1- critical, 2- major, 3- minor according to alarm severity. For devices with alarms on a slot, the index …
1.3.6.1.4.1.164.6.5.1.10.1.2ColumnalarmRelayOutputEnergizedread-writecurrentThis object shows whether the relay transports electricity permanently (energized) or just when the alarm is activated (deEnergized). Default value for critica…
1.3.6.1.4.1.164.6.5.1.10.1.3ColumnalarmRelayOutputOperStateread-onlycurrentThis object shows the operational state of the alarm relay.
1.3.6.1.4.1.164.6.5.1.10.1.4ColumnalarmRelayOutputCmdread-writecurrentSetting this object to cutOffOn, will suppress the alarm output as long as it is not triggered again. Upon completion, the value will automatically change to o…
1.3.6.1.4.1.164.6.5.1.11TablealarmBindToRelayTablenot-accessiblecurrentThis table enables binding alarms to the alarm output relays.
1.3.6.1.4.1.164.6.5.1.11.1RowalarmBindToRelayEntrynot-accessiblecurrentEntry containing the binding of alarms to the alarm output relays.
1.3.6.1.4.1.164.6.5.1.11.1.1ColumnalarmBindToRelayIndexnot-accessiblecurrentThis object is the index of the Alarm Output Relay. Values: 1- critical, 2- major, 3- minor according to alarm severity. For devices with alarms on a slot, the…
1.3.6.1.4.1.164.6.5.1.11.1.2ColumnalarmBindToRelayRowStatusread-createcurrentEnable rows creation/deletion. This is used for managed objects that are dynamically created or removed.
1.3.6.1.4.1.164.6.5.1.11.1.3ColumnalarmBindToRelaySourceTyperead-createcurrentThis is the Source Type of alarm or event that will be bound to the alarm relay.
1.3.6.1.4.1.164.6.5.1.11.1.4ColumnalarmBindToRelaySourceIdread-createcurrentSource ID (port, card etc.) that causes the alarm and will be bound to the alarm relay. Note: In order to bind all Source IDs of the same Source Type, this obj…
1.3.6.1.4.1.164.6.5.1.11.1.5ColumnalarmBindToRelayAlarmIdread-createcurrentAlarm or Event ID that will be bound to the alarm relay.
1.3.6.1.4.1.164.6.5.1.12TabledefectSoakTablenot-accessiblecurrentA table that defines the Defect Soaking and Clearing time periods.
1.3.6.1.4.1.164.6.5.1.12.1RowdefectSoakEntrynot-accessiblecurrentAn entry appears in this table for each technology.
1.3.6.1.4.1.164.6.5.1.12.1.1ColumndefectSoakTechnologynot-accessiblecurrentThe value will be a dummy value and equal to 1.
1.3.6.1.4.1.164.6.5.1.12.1.2ColumndefectSoakIntervalread-writecurrentThe time in milliseconds since a defect occurs until an alarm is raised.
1.3.6.1.4.1.164.6.5.1.12.1.3ColumndefectSoakClearIntervalread-writecurrentThe time in milliseconds since a defect is resolved until the alarm is cleared.
1.3.6.1.4.1.164.6.5.1.13TablealarmEventConfiguredTablenot-accessiblecurrentA table of entities configuration mask & severity. This tables reflects per each existing or configured instance alarm severity and masking, according to RO al…
1.3.6.1.4.1.164.6.5.1.13.1RowalarmEventConfiguredEntrynot-accessiblecurrentFor all existing entities supporting fault management there is an entry in this table holding the mask & severity configured.
1.3.6.1.4.1.164.6.5.1.13.1.1ColumnalarmEventConfiguredSourceTypenot-accessiblecurrentThis is the Source Type of the active alarm.
1.3.6.1.4.1.164.6.5.1.13.1.2ColumnalarmEventConfiguredSourceIdnot-accessiblecurrentThis object identifies the specific managed object that caused the alarm.
1.3.6.1.4.1.164.6.5.1.13.1.3ColumnalarmEventConfiguredIdnot-accessiblecurrentThis object identifies the ID of the raised alarm.
1.3.6.1.4.1.164.6.5.1.13.1.4ColumnalarmEventConfiguredSeverityread-onlycurrentThis object identifies the severity of the raised alarm. Note that the severity of the alarm in the Active Alarm table may be different from the severity confi…
1.3.6.1.4.1.164.6.5.1.13.1.5ColumnalarmEventConfiguredMaskingread-onlycurrentThis object identifies the alarm and event masking on various reporting means.
1.3.6.1.4.1.164.6.5.1.14ScalaralarmEventLogFileTimestampTyperead-writecurrentThis object reflects the type of event and alarm timestamps in the log file (which may be uploaded). utc (2): UTC timestamps are used localTime (3): Timestamps…
1.3.6.1.4.1.164.6.5.2NodealarmEventLog
1.3.6.1.4.1.164.6.5.2.1TablealarmEventLogTablenot-accessiblecurrentA table that holds a record of all raised alarms, cleared alarms and events that occurred. This table has limited number of rows, hence, is implemented as a cy…
1.3.6.1.4.1.164.6.5.2.1.1RowalarmEventLogEntrynot-accessiblecurrentEach entry in the table holds either a raised alarm, either a cleared alarm, or, an event.
1.3.6.1.4.1.164.6.5.2.1.1.1ColumnalarmEventLogIndexnot-accessiblecurrentThe table running index.
1.3.6.1.4.1.164.6.5.2.1.1.2ColumnalarmEventLogDateAndTimeread-onlycurrentThis variable denotes the time in which the alarm or the event occurred. If the NE implements a real-time clock, this variable MUST hold the UTC time. If the N…
1.3.6.1.4.1.164.6.5.2.1.1.3ColumnalarmEventLogAlarmOrEventIdread-onlycurrentThis object identifies the ID of the alarm or the event.
1.3.6.1.4.1.164.6.5.2.1.1.4ColumnalarmEventLogDescriptionread-onlycurrentThe description of the alarm or event.
1.3.6.1.4.1.164.6.5.2.1.1.5ColumnalarmEventLogSourceIdread-onlycurrentThis object identifies the specific managed object that caused the alarm.
1.3.6.1.4.1.164.6.5.2.1.1.6ColumnalarmEventLogSourceTyperead-onlycurrentAlarm or Event Source Type.
1.3.6.1.4.1.164.6.5.2.1.1.7ColumnalarmEventLogSeverityread-onlycurrentFor raised alarms this object denotes the specific alarm severity; For cleared alarms its value is always clear(1). For events the value of this object is alwa…
1.3.6.1.4.1.164.6.5.2.1.1.8ColumnalarmEventPropertiesread-onlycurrentThis object is relevant for alarms only. It shows whether the alarm will be displayed. When the bit of maskInlog is '1' this alarm will not be displayed to the…
1.3.6.1.4.1.164.6.5.2.1.1.9ColumnalarmEventReasonread-onlycurrentThis object is relevant for alarms only. It shows the reason for clearing the alarm.
1.3.6.1.4.1.164.6.5.2.1.1.10ColumnalarmEventLogSourceNameread-onlycurrentThis object identifies the alarm or event source name defined as an ASCII string. For detailed description see object activeAlarmSourceName.
1.3.6.1.4.1.164.6.5.2.2TablealarmEventLogAckTablenot-accessiblecurrentThis table enables acknowledging log table entries. The acknowledgement is in sense of display; it serves as a filter by time: when the manager issues an ackno…
1.3.6.1.4.1.164.6.5.2.2.1RowalarmEventLogAckEntrynot-accessiblecurrentThe acknowledgment function is implemented in a table for possible future required flexibility, such as having more than one acknowledge time.
1.3.6.1.4.1.164.6.5.2.2.1.1ColumnalarmEventLogAckIndexnot-accessiblecurrentThe index of the table represents to which log file the acknowledge refers: alarmEventLogAckIndex = 1: Log File (alarmEventLogTable) alarmEventLogAckIndex = 2:…
1.3.6.1.4.1.164.6.5.2.2.1.2ColumnalarmEventLogAckCmdread-writecurrentWhen the manager sets the value of this variable to on (3), the device saves the date and time to AlarmEventLogAckTime, and sets the value of this variable to …
1.3.6.1.4.1.164.6.5.2.2.1.3ColumnalarmEventLogAckTimeread-onlycurrentThis variable denotes the date and time when alarmEventLogAckCmd was last set to any value different than off(2).
1.3.6.1.4.1.164.6.5.3NodealarmEventStatistics
1.3.6.1.4.1.164.6.5.3.1TablealarmEventBriefLogTablenot-accessiblecurrentThis table holds the alarm log statistics information.
1.3.6.1.4.1.164.6.5.3.1.1RowalarmEventBriefLogEntrynot-accessiblecurrentStatistics on the alarm log.
1.3.6.1.4.1.164.6.5.3.1.1.1ColumnalarmEventBriefLogSourceTypenot-accessiblecurrentAlarm or Event Source Type.
1.3.6.1.4.1.164.6.5.3.1.1.2ColumnalarmEventBriefLogSourceIdnot-accessiblecurrentThis index identifies the specific managed object that caused the alarm.
1.3.6.1.4.1.164.6.5.3.1.1.3ColumnalarmEventBriefLogAlarmIdnot-accessiblecurrentThis index identifies the ID of the raised alarm.
1.3.6.1.4.1.164.6.5.3.1.1.4ColumnalarmEventBriefLogAlarmSeverityread-onlycurrentThis object identifies the severity of the raised alarm.
1.3.6.1.4.1.164.6.5.3.1.1.5ColumnalarmEventBriefLogTotalRaisedread-onlycurrentThis objects denotes how many times the alarm was raised since last reboot.
1.3.6.1.4.1.164.6.5.3.1.1.6ColumnalarmEventBriefLogTotalRaisedSinceAckread-onlycurrentThis objects denotes how many times the alarm was raised since last acknowledge.
1.3.6.1.4.1.164.6.5.3.1.1.7ColumnalarmEventBriefLogLastRaisedTimeread-onlycurrentThis object denotes the date and time that the alarm was last raised.
1.3.6.1.4.1.164.6.5.3.1.1.8ColumnalarmEventBriefLogLastRaisedTimeSinceAckread-onlycurrentThis object denotes the date and time that the alarm was last raised since acknowledged.
1.3.6.1.4.1.164.6.5.3.1.1.9ColumnalarmEventBriefLogLastClearedTimeread-onlycurrentThis object denotes the date and time that the alarms was last cleared.
1.3.6.1.4.1.164.6.5.3.1.1.10ColumnalarmEventBriefLogLastClearedTimeSinceAckread-onlycurrentThis object denotes the date and time that the alarms was last cleared since acknowledged.
1.3.6.1.4.1.164.6.5.3.1.1.11ColumnalarmEventBriefLogSourceNameread-onlycurrentThis object identifies the alarm or event source name defined as an ASCII string. For detailed description see object activeAlarmSourceName.
1.3.6.1.4.1.164.6.5.3.2TablealarmEventStatsTablenot-accessiblecurrentThis table holds Alarms and Events statistics information. This information summarizes the Total number of Critical, Major, Minor Alarms and number of Total ev…
1.3.6.1.4.1.164.6.5.3.2.1RowalarmEventStatsEntrynot-accessiblecurrentStatistics entry for the alarms and events.
1.3.6.1.4.1.164.6.5.3.2.1.1ColumnalarmEventStatsTypenot-accessiblecurrentThis index shows the Type of Statistics. It can be from the Active Alarms or from the Log .
1.3.6.1.4.1.164.6.5.3.2.1.2ColumnalarmEventStatsTotalCriticalread-onlycurrentThis variable counts the total number of raised alarms with severity Critical.
1.3.6.1.4.1.164.6.5.3.2.1.3ColumnalarmEventStatsTotalMajorread-onlycurrentThis variable counts the total number of raised alarms with severity Major.
1.3.6.1.4.1.164.6.5.3.2.1.4ColumnalarmEventStatsTotalMinorread-onlycurrentThis variable counts the total number of raised alarms with severity Minor.
1.3.6.1.4.1.164.6.5.3.2.1.5ColumnalarmEventStatsTotalEventsread-onlycurrentThis variable counts the total number of events.
1.3.6.1.4.1.164.6.6IdentityradGenAllRAD General MIB.
1.3.6.1.4.1.164.40.3Nodesfp
1.3.6.1.4.1.164.40.3.4NodesfpConnector
1.3.6.1.4.1.164.40.3.4.0NodesfpEvents
1.3.6.1.4.1.164.40.3.4.0.3NotificationsfpRemovedcurrentThis trap indicates SFP not installed
Type Definitions
NameSyntaxStatusDescription
AlarmEventIdINTEGER { systemLicenseInvalid (20001), systemDeviceTemperatureOra (20002), systemEmergencyLicenseActive (20003), systemConfigurationMismatch (20004), systemHardwareFailure (20005), systemInterfaceMismatch (20006), systemNoInterface (20007), systemSwPackCorrupted (20008), systemTraceMsgProtoMemAllocErr (20009), systemPmProcessDisabled (20010), systemMainCardsSync (20011), systemSourceClockFailure (20012), systemNtpAccuracyOutOfLimit (20013), systemLowMemory (20014), systemCriticalLowMemory (20015), systemPoePowerDeliveryExceeded (20016), systemNewSwFromBootMismatch (20017), fanFailure (20101), powerDeliveryFailure (20201), powerInOra (20202), powerInLow (20203), alarmInput (20401), stationClockAis (30102), stationClockLof (30103), stationClockLos (30104), ptpRecoveredNoPtpMaster (30201), ptpRecoveredInvalidFreqAccuracy (30202), ptpRecoveredInvalidTimeAccuracy (30203), ptpRecoveredDisqualifiedMaster (30204), clockDomainSystemClockUnlock (30301), clockDomainStationClockQlLow (30302), clockDomainStationClockUnlock (30303), ptpRecoveredMasterSyncFailure (30401), ptpRecoveredMasterAnnounceFailure (30402), ptpRecoveredMasterDelayResponseFailure (30403), clockDomainSourceFailure (30501), ptpMasterUnavailableTod (30601), ptpMasterUnavailable1pps (30602), ptpMasterSlavesLimitReached (30603), gnssNotLocked (30702), gnssHardwareFailure (30703), g82751RecoveredNoMaster (30801), g82751RecoveredFreqOutOfSpec (30802), g82751RecoveredTimeOutOfSpec (30803), g82751RecoveredDisqualMaster (30804), g82751RecoveredSyncFail (30805), g82751RecoveredAnnounceFail (30806), g82751RecoveredDelayRespFail (30807), cardHwFailure (40001), cardMismatch (40002), cardProvisionFailure (40003), cardUnsupportedSw (40004), cardUnsupportedHw (40005), cardImproperRemoval (40006), cardTemperatureOra (40007), cardNoResponse (40008), cardInitFailure (40009), cardConfigurationMismatch (40010), cardLoading (40011), cardUserInitiatedSwitchover (40012), cardFaultPropagation (40013), smartSfpMismatch (40101), ethSfpNoResponse (50001), ethSfpMismatch (50002), ethLos (50003), ethSfpRemoved (50004), ethSfpTemperatureOra (50005), ethSfpOprOra (50006), ethFaultPropagation (50007), ethAutoNegotiationFailure (50008), ethLfs (50009), ethSilentStartNoRx (50010), ethDot1xSupplicantAuthFailed (50011), ethOamEfmLinkDown (50012), ethOamEfmLinkFaultIndication (50013), ethOamEfmFeLinkFaultIndication (50014), ethOamEfmCriticalLinkIndication (50015), ethOamEfmFeCriticalLinkIndication (50016), ethOamEfmDyingGaspIndication (50017), ethOamEfmFeDyingGaspIndication (50018), ethPoePoweredDeviceDisabled (50019), ethLagLacpDown (50020), ethLagLacpLoopDetected (50021), ethLagLacpChurn (50022), ethMacsecJoinCaFailed (50023), ethFatPipeRateExceededBwp (50024), muxEthTdmLof (60001), muxEthTdmLos (60002), muxEthFaultPropagation (60003), muxEthTdmRemoteConnectionFailure (60005), muxEthTdmLoopDetection (60006), muxEthTdmAis (60007), muxEthTdmSfpMismatch (60008), muxEthTdmSfpRemoved (60009), muxEthTdmSfpTemperatureOra (60010), muxEthTdmSfpOprOra (60011), shdslPowerFeedingOverCurrent (70201), shdslInitializationFailure (70202), shdslConfigMismatch (70203), shdslManagementLinkDown (70204), shdslLoopAttenOra (70214), shdslSnrMarginOra (70216), shdslLosw (70218), shdslExcessiveCrcError (70220), shdslLinkDown (70222), pcsLinkDown (70401), pcsOamEfmLinkDown (70402), pcsOamEfmLinkFaultIndication (70403), pcsOamEfmFeLinkFaultIndication (70404), pcsOamEfmCriticalLinkIndication (70405), pcsOamEfmFeCriticalLinkIndication (70406), pcsOamEfmDyingGaspIndication (70407), pcsOamEfmFeDyingGaspIndication (70408), pcsFaultPropagation (70409), vdsl2LinkDown (70601), voiceHwFailure (90001), sdhSonetSfpNoResponse (100001), sdhSonetSfpMismatch (100002), sdhSonetLof (100003), sdhSonetRfi (100004), sdhSonetLos (100005), sdhSonetSfpRemoved (100006), sdhSonetSfpTemperatOra (100007), sdhSonetSfpOprOra (100008), sdhSonetAisLine (100009), sdhSonetTimLine (100010), sdhSonetSdLine (100011), sdhSonetEedLine (100012), sdhSonetFaultPropagation (100013), sdhSonetManagementLinkDown (100014), sdhSonetApsProtectionByteFailure (100016), sdhSonetApsChannelMismatch (100017), sdhSonetApsModeMismatch (100018), sdhSonetApsProtectionLineFailureFe (100019), sdhSonetLicenseMismatch (100020), sdhSonetApsInvalidMode (100021), vcVtAisVc (100101), vcVtLomfVc (100102), vcVtUnequipVc (100103), vcVtTimVc (100104), vcVtPlmVc (100105), vcVtLopVc (100106), vcVtSdVc (100107), vcVtEedVc (100108), vcVtRfiVc (100109), vcVtHg1Ais (100110), vcVtHg1Lof (100111), vcVtHg1Rfi (100112), vcVtHg2Ais (100113), vcVtHg2Lof (100114), vcVtHg2Rfi (100115), vcVtHg3Ais (100116), vcVtHg3Lof (100117), vcVtHg3Rfi (100118), vcVtHg4Ais (100119), vcVtHg4Lof (100120), vcVtHg4Rfi (100121), vcVtUserInitiatedSwitchover (100122), pathAisPath (100201), pathLomfPath (100202), pathUnequipPath (100203), pathTimPath (100204), pathPlmPath (100205), pathLopPath (100206), pathSdPath (100207), pathEedPath (100208), pathRfiPath (100209), pathUserInitiatedSwitchover (100210), e1t1UserInitiatedSwitchover (110101), e1t1ManagementLinkDown (110102), e1t1ExcessiveBpv (110103), e1t1ExcessiveErrorRatio (110104), e1t1Ais (110105), e1t1Lof (110106), e1t1Rai (110107), e1t1Lomf (110108), e1t1Los (110110), e1t1Ds1RingClockFailure (110111), e1t1Ds1RingDirectionMismatch (110112), e1t1FaultPropagation (110113), ds1OptOpticalReceiverLos (111001), ds1OptDs1Lof (111002), ds1OptC3794Lof (111003), ds1OptDs1Rai (111004), ds1OptFaultPropagation (111005), ds1OptManagementLinkDown (111006), ds1OptAis (111007), ds1OptExcessiveBpv (111008), e3t3Rai (120101), e3t3Ais (120102), e3t3Lof (120103), e3t3Los (120104), e3t3UserInitiatedSwitchover (120105), ds0BundleLof (120301), ds0BundleRdi (120302), ds0BundleOutOfService (120303), ds0BundleRemoteForce (120304), ds0G703Los (120401), ds0G703FaultPropagation (120402), ds0G703OutOfSequence (120403), vcgMinimumMembers (130001), vcgFaultPropagation (130002), vcgDifferentialDelayExceeded (130003), vcgLoa (130004), vcgLoopDetection (130005), serialHwFail (150001), serialLof (150002), serialRai (150003), serialNoRts (150004), serialRs232RateMismatch (150006), serialFaultPropagation (150007), serialLos (150009), serialBundleLof (150101), serialBundleRai (150102), serialBundleFaultPropagation (150103), logicalMacOamEfmLinkDown (180001), logicalMacOamEfmLinkFaultIndication (180002), logicalMacOamEfmFeLinkFaultIndication (180003), logicalMacOamEfmCriticalLinkIndication (180004), logicalMacOamEfmFeCriticalLinkIndication (180005), logicalMacOamEfmDyingGaspIndication (180006), logicalMacOamEfmFeDyingGaspIndication (180007), logicalMacFaultPropagation (180008), etpPortDown (200001), etpEpsConfigurationMismatch (200101), flowFaultPropagation (210001), gfpLof (230001), gfpCsf (230002), gfpRxTrailFailure (230003), gfpFaultPropagation (230004), hdlcRxTrailFailure (240001), hdlcFaultPropagation (240002), lagLacpDown (250001), lagLacpLoopDetection (250002), lagLacpChurn (250003), lagMinimumMembers (250004), lagFailed (250005), lagFaultPropagation (250006), oamCfmMepAis (270201), oamCfmMepLck (270202), oamCfmMepMismatch (270203), oamCfmMepDefXconCCM (270204), oamCfmMepDefErrorCCM (270205), oamCfmRmepLoc (270601), oamCfmRmepRdi (270602), oamCfmRmepDefRemoteCCM (270603), oamCfmRmepDefRDICCM (270604), oamCfmRmepDefMACstatus (270605), pppLcpFailure (280001), pppBcpFailure (280002), pppLoopDetection (280003), mlpppBcpFailure (280101), mlpppFaultPropagation (280102), epsConfigMismatch (290201), erpStateProtected (290301), routerNatMappingTableFull (300001), routerInterfaceDhcpClientNoLease (300101), ospfGracefulRestart (300201), ospfNeighborStateChange (300302), ospfInterfaceStateChange (300401), ospfInterfaceConfigError (300402), bgpSessionFailure (300601), bgpTcpSessionAuthFailure (300602), ipBfdDetectionTimeExpired (300801), twampSessionUnavailable (300901), twampSessionForwardUnavailable (300902), twampSessionBackwardUnavailable (300903), twampPeerTodAccuracyOutOfLimit (301001), tunnelDown (301201), tunnelNhrpRegistrationNoReply (301202), tunnelNhrpRegistrationNak (301203), pwConfigMismatch (310001), pwOamFailure (310002), pwRdi (310003), pwRxFailure (310004), pwFaultPropagation (310006), pwRxFailureFe (310008), pwRdiFe (310009), cmdChannelLof (320001), cmdChannelRai (320002), cmdChannelAddressMismatch (320003), cmdChannelOutOfService (320004), cmdInActive (320101), cmdOutActive (320201), cellularIfDown (320301), systemSwInstallStart (1020001), systemSwInstallEnd (1020002), systemDownloadEnd (1020003), systemUserReset (1020004), systemAlternativeConfLoaded (1020005), systemConfMigration (1020006), systemConfSanity (1020007), systemTrapHardSyncStart (1020008), systemTrapHardSyncEnd (1020009), systemPmSpaceOverflow (1020010), systemResourceOverflow (1020011), systemDyingGasp (1020012), systemDyingGaspRecovery (1020013), systemTraceMsgFatalError (1020014), systemTraceMsgException (1020015), systemTraceMsgSwWatchdogReset (1020016), systemBackupConfigurationLoaded (1020017), systemDeviceStartup (1020018), systemItuSatTestStart (1020019), systemItuSatConfigurationTestEnd (1020020), systemItuSatPerformanceTestEnd (1020021), systemSuccessfulLogin (1020022), systemFailedLogin (1020023), systemLogout (1020024), systemRfc2544TestStart (1020025), systemRfc2544TestEnd (1020026), systemAclLogging (1020027), systemStartupConfigUnconfirmed (1020028), systemActiveSoftwareChanged (1020029), systemRunningConfigSaved (1020030), systemItuSatResponderActivated (1020031), systemItuSatResponderDeactivated (1020032), systemSummerTimeStarted (1020033), systemSummerTimeEnded (1020034), systemCfmSoamRxPacketDropped (1020035), systemRemoteTerminalStarted (1020036), systemRemoteTerminalEnded (1020037), systemLicenseEnabled (1020038), systemLicenseDisabled (1020039), systemLicenseViolation (1020040), systemLicenseFilesIncompatible (1020041), systemLicenseInstallEnd (1020042), systemLicenseAboutToExpire (1020043), systemLicenseExpired (1020044), systemL3SatTestStart (1020045), systemL3SatConfigurationTestEnd (1020046), systemL3SatPerformanceTestEnd (1020047), systemL3SatResponderActivated (1020048), systemL3SatResponderDeactivated (1020049), systemAbmTestStart (1020050), systemAbmTestEnd (1020051), systemL3SatPreliminaryTestFailed (1020052), systemFileOverflow (1020053), systemTimeChanged (1020054), systemTimeSourceChanged (1020055), systemSerialPortDisabled (1020056), systemSerialPortEnabled (1020057), systemFactoryDefaultButtonPushed (1020058), systemPcRpcapSessionStarted (1020060), systemPcRpcapSessionEnded (1020061), systemPcRpcapRequestRejected (1020062), ptpRecoveredPtpStateChange (1030201), ptpRecoveredSevereFrequencyCondition (1030202), ptpRecoveredSevereTimeCondition (1030203), ptpRecoveredMasterSwitchover (1030204), ptpRecoveredTimeStateChange (1030205), clockDomainSystemSourceClockChange (1030301), clockDomainStationSourceClockChange (1030302), ptpRecoveredMasterUnicastNegotiationFailue (1030401), ptpMasterGrantedServiceAborted (1030601), ptpMasterSlaveRequestDenied (1030602), g82751RecoveredFreqStateChange (1030801), g82751RecoveredTimeStateChange (1030802), g82751RecoveredRxClkClsChange (1030803), g82751RecoveredSlavePortChange (1030804), g82751RecoveredGMChange (1030805), g82751MasterTxClkClassChange (1031001), cardReset (1040001), cardSwitchover (1040002), cardProtectionCommand (1040003), cardPluggedIn (1040004), cardPluggedOut (1040005), cardTraceMsgFatalError (1040006), cardTraceMsgException (1040007), cardTraceMsgSwWatchdogReset (1040008), cardFanOperModeChanged (1040009), ethSfpOptOra (1050001), ethSfpOptOraOff (1050002), ethSfpLbcOra (1050003), ethSfpLbcOraOff (1050004), ethOamEfmRemoteLoopback (1050005), ethOamEfmRemoteLoopbackOff (1050006), ethPortSwitchover (1050007), ethPoePoweredDeviceConnected (1050008), ethPoePoweredDeviceRemoved (1050009), ethProtectionCommand (1050010), ethLoopback (1050011), ethLoopbackOff (1050012), ethDot1xSuppAuthorized (1050024), ethDot1xSuppUnauthorized (1050025), ethDot1xAuthSuppAuthorized (1050026), ethDot1xAuthSuppUnauthorized (1050027), ethMacsecTxScCreated (1050013), ethMacsecRxScCreated (1050014), ethMacsecRxScDeleted (1050015), ethMacsecKeyServerElected (1050016), ethMacsecMembershipRejected (1050017), ethMacsecSaNotInUseDiscarded (1050018), ethMacsecLateFrameDiscarded (1050019), ethMacsecInvalidFrameDiscarded (1050020), ethMacsecNoSecTagDiscarded (1050021), ethMacsecBadSecTagDiscarded (1050022), ethMacsecUnknownSciDiscarded (1050023), muxEthTdmSfpOptOra (1060001), muxEthTdmSfpOptOraOff (1060002), shdslLoopback (1070204), shdslLoopbackOff (1070205), pcsOamEfmRemoteLoopback (1070401), pcsOamEfmRemoteLoopbackOff (1070402), briLoopback (1080001), briLoopbackOff (1080002), sdhSonetSfpOptOra (1100001), sdhSonetSfpLbcOra (1100002), sdhSonetEsSectionTca (1100003), sdhSonetSesSectionTca (1100004), sdhSonetSefsSectionTca (1100005), sdhSonetCvSectionTca (1100006), sdhSonetEsLineTca (1100007), sdhSonetSesLineTca (1100008), sdhSonetCvLineTca (1100009), sdhSonetUasLineTca (1100010), sdhSonetEsLineTcaFe (1100011), sdhSonetSesLineTcaFe (1100012), sdhSonetCvLineTcaFe (1100013), sdhSonetUasLineTcaFe (1100014), sdhSonetPortSwitchOver (1100015), sdhSonetSfpOptOraOff (1100017), sdhSonetSfpLbcOraOff (1100018), sdhSonetLoopback (1100019), sdhSonetLoopbackOff (1100020), sdhSonetApsCompatibleCommand (1100021), sdhSonetApsOptimizedCommand (1100022), vcVtEsVcVtTca (1100101), vcVtSesVcVtTca (1100102), vcVtCvVcVtTca (1100103), vcVtUasVcVtTca (1100104), vcVtEsVcVtTcaFe (1100105), vcVtSesVcVtTcaFe (1100106), vcVtCvVcVtTcaFe (1100107), vcVtUasVcVtTcaFe (1100108), pathEsPathTca (1100201), pathSesPathTca (1100202), pathCvPathTca (1100203), pathUasPathTca (1100204), pathEsPathTcaFe (1100205), pathSesPathTcaFe (1100206), pathCvPathTcaFe (1100207), pathUasPathTcaFe (1100208), e1t1FrameSlip (1110101), e1t1Bpv (1110102), e1t1CrcError (1110103), e1t1Loopback (1110104), e1t1LoopbackOff (1110105), e1t1EsLineTca (1110106), e1t1CvPathTca (1110107), e1t1EsPathTca (1110108), e1t1SesPathTca (1110109), e1t1SefsPathTca (1110110), e1t1CssPathTca (1110111), e1t1UasPathTca (1110112), e1t1PortSwitchover (1110113), ds1OptFrameSlip (1111001), ds1OptBpv (1111002), ds1OptCrcError (1111003), ds1OptLoopback (1111004), ds1OptLoopbackOff (1111005), ds1OptEsLineTca (1111006), ds1OptCvPathTca (1111007), ds1OptEsPathTca (1111008), ds1OptSesPathTca (1111009), ds1OptSefsPathTca (1111010), ds1OptCssPathTca (1111011), ds1OptUasPathTca (1111012), ds1OptPortSwitchover (1111013), e3t3Loopback (1120101), e3t3LoopbackOff (1120102), ds0G703Loopback (1120401), ds0G703LoopbackOff (1120402), serialBufferSlip (1150001), bridgeSpanningTreeNewRoot (1170001), bridgeSpanningTreeTopologyChange (1170002), bridgeMstpNewRoot (1170003), bridgeMstpTopologyChange (1170004), bridgeMldSnoopingUnsupportedIp (1170005), bridgeMldSnoopingDuplicateIp (1170006), logicalMacOamEfmRemoteLoopback (1180001), logicalMacOamEfmRemoteLoopbackOff (1180002), etpEpsPortSwitchover (1200101), ds0BundlePortSwitchover (1120301), lagSubGroupSwitchover (1250001), lagFailure (1250002), oamCfmDestNeDelayTca (1270401), oamCfmDestNeDelayTcaOff (1270402), oamCfmDestNeDelayVarTca (1270403), oamCfmDestNeDelayVarTcaOff (1270404), oamCfmDestNeLossRatioTca (1270405), oamCfmDestNeLossRatioTcaOff (1270406), oamCfmDestNeLossRatioTcaFe (1270407), oamCfmDestNeLossRatioTcaFeOff (1270408), oamCfmDestNeUnavailableRatioTca (1270409), oamCfmDestNeUnavailableRatioTcaOff (1270410), oamCfmDestNeUnavailableRatioTcaFe (1270411), oamCfmDestNeUnavailableRatioTcaFeOff (1270412), epsPortSwitchOver (1290201), erpWtrStart (1290301), erpPortStateChange (1291101), routerNatPortRangeExhaustion (1300001), routerInterfaceDhcpLeaseObtained (1300102), routerInterfaceDhcpAdressConflict (1300103), ospfNeighborGracefulRestart (1300301), twampSessionLossRatioTca (1300901), twampSessionDelayTca (1300902), twampSessionDelayVarTca (1300903), twampSessionForwardLossRatioTca (1300904), twampSessionForwardDelayTca (1300905), twampSessionForwardDelayVarTca (1300906), twampSessionBackwardLossRatioTca (1300907), twampSessionBackwardDelayTca (1300908), twampSessionBackwardDelayVarTca (1300909), twampSessionRequestRejected (1300910), twampPeerTestStarted (1301001), twampPeerTestStopped (1301002), twampPeerConnectionRejected (1301003), twampPeerTestActivationRejected (1301004), twampResponderConnectionExpired (1301101), twampResponderSessionExpired (1301102), pwSwitchOver (1310001), pwJitterBufferOverflow (1310002), pwJitterBufferUnderflow (1310003), pwOamDelayTca (1310004), pwOamDelayTcaOff (1310005), bgpSessionPrefixOverflow (1300601), ipBfdNeighborShutdown (1300801), ipBfdNeighborAddressChange (1300802), cmdChannelCrcError (1320001), cmdChannelTxDelayChange (1320002), cmdChannelPortSwitchover (1320003), cellularIfRssiTca (1320301), cellularIfRssiTcaOff (1320302), allAlarmsAndEvents (2147483647), allAlarms (2147483646), allEvents (2147483645) }currentA unique identifier for alarms and events.
AlarmEventLogStatsTypeINTEGER { activeAlarms (1), briefLog (2), briefLogSinceAck (3), activeAlarmsMasked (4) }currentType of Statistics. The Statistics can be from the Active Alarms or from the Log .
AlarmEventMaskingBITS { log (0), snmpTrap (1), ledRelay (2), popUp (3), vtyPopup (4) }currentMask(if the bit is '1') and unmask('0') different methods of reporting of alarms and events. log(0)- Masking/unmasking sending of the history log, active alarm and SYSLOG. snmpTrap(1)- Masking/unmasking sending of SNMP …
AlarmEventSourceTypeINTEGER { security (10000), system (20000), fan (20100), powerSupply (20200), systemFe (20300), alarmInput (20400), abm (20600), clock (30000), stationClock (30100), ptpRecovered (30200), clockDomain (30300), ptpRecoveredMaster (30400), clockDomainSource (30500), ptpdistributed (30600), gnss (30700), g82751Recovered (30800), g82751Master (31000), card (40000), smartSfp (40100), eth (50000), ethFe (50100), intEth (50200), xVirtualPort (50300), mngEth (50400), muxEthTdm (60000), muxEthTdmFe (61000), dsl (70000), vdsl (70100), shdsl (70200), adsl (70300), pcs (70400), shdslFe (70500), vdsl2 (70600), bri (80000), briFe (80100), voice (90000), sdhSonet (100000), vcVt (100100), path (100200), ds1 (110000), ds1Opt (111000), e1 (110100), t1 (110200), j1 (110300), e1i (110400), t1i (110500), j1i (110600), e1Fe (110700), t1Fe (110800), j1Fe (110900), ds3 (120000), e3 (120100), t3 (120200), ds0Bundle (120300), ds0G703 (120400), vcg (130000), atm (140000), atmPort (140100), atmVp (140200), atmVc (140300), serial (150000), serialBundle (150100), serialFe (150200), ima (160000), bridge (170000), bridgePort (170100), logicalMac (180000), ces (190000), etpPort (200000), etp (200100), flow (210000), svi (220000), gfp (230000), hdlc (240000), lag (250000), mpls (260000), oam (270000), oamEfm (270100), oamCfmMep (270200), oamCfmService (270300), oamCfmDestNe (270400), oamCnode (270500), oamCfmRMep (270600), ppp (280000), mlppp (280100), protection (290000), aps (290100), eps (290200), erp (290300), protectionMain (290400), protectionIo (290500), protectionVcPath (290600), protectionTdm (290700), protectionEth (290800), protectionPw (290900), protectionTdmMux (291000), erpPort (291100), router (300000), routerInterface (300100), ospf (300200), ospfNeighbor (300300), ospfInterface (300400), bgp (300600), ipBfd (300800), twampSession (300900), twampPeer (301000), twampResponder (301100), tunnel (301200), pw (310000), cmdChannel (320000), cmdIn (320100), cmdOut (320200), cellular (320300) }currentA unique Source Type for alarm and for event.
AlarmPropertiesBITS { maskInlog (0) }currentThis textual convention shows the properties of the current Alarm. maskInLog(0) - when this bit value is set to '1' the alarm that exists in the log table will not be displayed to the user.
AlarmReasonINTEGER { alarmResolved (1), userInitiated (2), alarmSuppression (3), alarmRebuild (4), notApplicable (255) }currentThis textual convention shows the reason for generating alarm or event: alarmResolved (1) - Alarm is cleared because the condition causing it has been resolved. userInitiated (2) - Alarm raising or clearing, or event wa…
AlarmSeverityINTEGER { cleared (1), critical (3), major (4), minor (5), warning (6) }currentAlarm severity values according to ITU Recommendation X.733, 'Information Technology - Open Systems Interconnection - System Management: Alarm Reporting Function', 1992.
SourceIdUnsigned32currentA unique identifier for a source.
MIB Viewer