RAD-NtePrtCo-MIB
79 objects
ATM NTE MIB.
Imported Objects
| ATM-MIB | atmVclVci atmVclVpi atmVplVpi |
| IF-MIB | ifIndex |
| RAD-SMI-MIB | rad |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.12 | IdentityradAtm | ATM NTE MIB. | ||
| 1.3.6.1.4.1.164.12.3 | NodeatmNte | |||
| 1.3.6.1.4.1.164.12.3.0 | IdentityatmNteEvents | current | The events for RAD ATM products. | |
| 1.3.6.1.4.1.164.12.3.2 | NodeatmNtePrt | |||
| 1.3.6.1.4.1.164.12.3.2.1 | NodeatmNtePrtConfig | |||
| 1.3.6.1.4.1.164.12.3.2.1.1 | TableatmNteConfIfTable | not-accessible | current | The Physical interface configuration table. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1 | RowatmNteConfIfEntry | not-accessible | current | An entry in the Physical interface configuration table. The ifIndex is of the lowest physical layer. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.1 | ColumnatmConfIfTransmitClk | read-write | current | The transmit clock of the port. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.2 | ColumnatmConfIfLoopback | read-write | current | Interface Loopback. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.3 | ColumnatmConfIfFrameType | read-write | current | The frame type. Valid values for a 155M interface: sonet(2), sdh(3). Valid values for a T3 interface: direct(4), plcpInternal(5), plcpExternal(6), directNoScrm… |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.4 | ColumnatmConfIfCardType | read-only | deprecated | The card type. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.5 | ColumnatmConfAtmIfVpiVciLimit | read-only | current | The limit on the sum of the VPI+VCI bits for this interface. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.6 | ColumnatmConfIfHwFeatures | read-write | current | HW features command. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.7 | ColumnatmConfIfOutputRate | read-write | current | This parameter indicates the output rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values … |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.8 | ColumnatmConfIfInputRate | read-write | current | This parameter indicates the input rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values c… |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.9 | ColumnatmConfAlarmForwarding | read-write | current | Enables Path AIS Alarm forwarding upon a failure detection. The following might be considered as a failure: LOS, LOF, LOC, SLM, LOP, Path AIS and Line AIS. dis… |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.10 | ColumnatmConfIfAllocatedBw | read-only | current | Total VC Bandwidth Allocation. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.11 | ColumnatmConfIfLowerVpi | read-write | current | The Lower possible VPI. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.12 | ColumnatmConfIfOamMode | read-write | current | OAM support Mode, which determines the interface's location in a segment wise. |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.13 | ColumnatmConfIfOamFailureInd | read-write | current | This object allows user to define the type of indication (if any) that will be created upon a LB cell failure, for all VCs on which OAM loopback traffic is act… |
| 1.3.6.1.4.1.164.12.3.2.1.2 | TableatmNteAlarmIfTable | not-accessible | current | The interface Alarm table. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1 | RowatmNteAlarmIfEntry | not-accessible | current | An entry in the interface Alarm table. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.1 | ColumnatmInterfaceActiveAlarms | read-only | current | A Bit String of the active alarms on this interface. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. Th… |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.2 | ColumnatmThresholdSectionBIP | read-write | current | When Section BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.3 | ColumnatmThresholdLineBIP | read-write | current | When Line BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.4 | ColumnatmThresholdLineFEBE | read-write | current | When Line FEBEs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.5 | ColumnatmThresholdPathBIP | read-write | current | When Path BIPs are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.6 | ColumnatmThresholdPathFEBE | read-write | current | When Path FEBEs are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.7 | ColumnatmThresholdErroredCells | read-write | current | When Errored Cells are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.8 | ColumnatmThresholdLostCells | read-write | current | When Lost Cells are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.9 | ColumnatmThresholdMisinsertedCells | read-write | current | When Misinserted Cells are greater than this threshold, an active alarm is raised. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.10 | ColumnatmInterfaceAlarmStatus | read-only | current | The variable is on(3) when there is any active alarm on this interface. |
| 1.3.6.1.4.1.164.12.3.2.1.2.1.11 | ColumnatmInterfaceMaskAlarms | read-write | current | A Bit String of alarms mask on this interface. An up bit (1) means that the respective alarm is masked. A down bit (0) means no mask. The mask is supported for… |
| 1.3.6.1.4.1.164.12.3.2.1.3 | TableatmNteConfVpTable | not-accessible | current | The ATM VP configuration table. The table is an extension to the atmVplTable of RFC-1695. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1 | RowatmNteConfVpEntry | not-accessible | current | An entry in the ATM VP configuration table. ifIndex of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.1 | ColumnatmConfVpPolicing | read-write | current | Policing method desired for this VPL. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.2 | ColumnatmConfVpCCAdminStatus | read-write | current | up(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the … |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.3 | ColumnatmConfVpLoopbackAdminStatus | read-write | current | up(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down… |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.4 | ColumnatmConfVpLoopbackSinkAddress | read-write | current | Destination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.5 | ColumnatmConfVpCongestionControl | read-write | current | Each bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.6 | ColumnatmConfVpCCDirection | read-write | current | both(2) - Agent send OAM CC cells and check received OAM CC cells source(4)- Agent send OAM CC cells. sink(5) - Agent checks received OAM CC cells. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.7 | ColumnatmConfVpCreationTime | read-only | current | A date-time in which the VP was created. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.8 | ColumnatmConfVpOamSupport | read-write | current | OAM support mode, which determines the device location in a segment wise. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.9 | ColumnatmConfVpCCOperStatus | read-only | current | initial(1) - The CC activation process is not started. source(4) - Agent sends OAM CC cells. sink(5) - Agent checks received OAM CC cells. both (8) - OAM CC of… |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.10 | ColumnatmConfVpLoopbackTraffic | read-write | current | This parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3… |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.11 | ColumnatmConfVpLoopbackFailureInd | read-write | current | This object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will… |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.12 | ColumnatmConfVpLoopbackFailureThreshold | read-write | current | The number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.13 | ColumnatmConfVpOamDirection | read-write | current | The direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.14 | ColumnatmConfVpOamDescrIndex | read-write | current | This parameter indicates the VPL's OAM Descriptor index, according to the OAM Descriptor Configuration Table. |
| 1.3.6.1.4.1.164.12.3.2.1.3.1.15 | ColumnatmConfVpConnected | read-write | current | This object indicates whether this VP is connected and if connected, what is it connected to. |
| 1.3.6.1.4.1.164.12.3.2.1.4 | TableatmNteConfVcTable | not-accessible | current | The ATM VC configuration table. The table is an extension to the atmVclTable of RFC-2515. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1 | RowatmNteConfVcEntry | not-accessible | current | An entry in the ATM VC configuration table. ifIndex of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.1 | ColumnatmConfVcPolicing | read-write | current | Policing method desired for this VCL. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.2 | ColumnatmConfVcCCAdminStatus | read-write | current | up(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the … |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.3 | ColumnatmConfVcLoopbackAdminStatus | read-write | current | up(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.4 | ColumnatmConfVcLoopbackSinkAddress | read-write | current | Destination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.5 | ColumnatmConfVcCongestionControl | read-write | current | Each bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI. Fo… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.6 | ColumnatmConfVcCCDirection | read-write | current | both(2) - Agent sends OAM CC cells and checks received OAM CC cells. none(3) - Agent does not send and does not check received OAM CC cells. source(4)- Agent s… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.7 | ColumnatmConfVcCreationTime | read-only | current | A date-time in which the VC was created. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.8 | ColumnatmConfVcOamSupport | read-write | current | OAM support mode, which determines the device location in a segment wise. endToEndAndSegment - In this mode the OAM cells are generated before the ABM (ATM Buf… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.9 | ColumnatmConfVcCCActivationCtrl | read-write | current | manual(1) - CC Activation process is disable activator(2) - ACE-101 initiate CC Activation process listener(3) - ACE-101 wait to CC Activation request from rem… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.10 | ColumnatmConfVcCCOperStatus | read-only | current | initial (1) - The CC activation process is not started. up (2) - Continuity Check (CC) activated. down (3) - CC deactivated. source (4) - OAM CC(Continuity Che… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.11 | ColumnatmConfVcLoopbackTraffic | read-write | current | This parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.12 | ColumnatmConfVcLoopbackFailureInd | read-write | current | This object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will… |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.13 | ColumnatmConfVcLoopbackFailureThreshold | read-write | current | The number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.14 | ColumnatmConfVcOamDirection | read-write | current | The direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.15 | ColumnatmConfVcName | read-write | current | VC Name. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.16 | ColumnatmConfVcConnected | read-write | current | This object indicates whether this VC is connected and if connected, what is it connected to. Originally, it was read-only. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.17 | ColumnatmConfVcOamDescrIndex | read-write | current | This parameter indicates the VCL's OAM Descriptor index, according to the OAM Descriptor Configuration Table. |
| 1.3.6.1.4.1.164.12.3.2.1.4.1.18 | ColumnatmConfVcNoOfUsages | read-only | current | This object indicates the number of times this VCL is used. |
| 1.3.6.1.4.1.164.12.3.2.1.5 | TableatmNteAlarmVpTable | not-accessible | current | The ATM VP Alarm table. |
| 1.3.6.1.4.1.164.12.3.2.1.5.1 | RowatmNteAlarmVpEntry | not-accessible | current | An entry in the ATM VP Alarm table. ifIndex of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.1.5.1.1 | ColumnatmNteVpAlarmVpi | read-only | current | The VPI on which there is an active alarm. |
| 1.3.6.1.4.1.164.12.3.2.1.5.1.2 | ColumnatmNteVpActiveAlarms | read-only | current | A Bit String of the active alarms on this VP. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani… |
| 1.3.6.1.4.1.164.12.3.2.1.6 | TableatmNteAlarmVcTable | not-accessible | current | The ATM VC Alarm table. |
| 1.3.6.1.4.1.164.12.3.2.1.6.1 | RowatmNteAlarmVcEntry | not-accessible | current | An entry in the ATM VC Alarm table. ifIndex of the ATM layer. |
| 1.3.6.1.4.1.164.12.3.2.1.6.1.1 | ColumnatmNteVcAlarmVpi | read-only | current | The VPI of the VC on which there is an active alarm. |
| 1.3.6.1.4.1.164.12.3.2.1.6.1.2 | ColumnatmNteVcAlarmVci | read-only | current | The VCI of the VC on which there is an active alarm. |
| 1.3.6.1.4.1.164.12.3.2.1.6.1.3 | ColumnatmNteVcActiveAlarms | read-only | current | A Bit String of the active alarms on this VC. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani… |