RAD-Services-MIB
286 objects
Services MIB.
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| Q-BRIDGE-MIB | VlanIdOrAnyOrNone VlanIdOrNone |
| RAD-SMI-MIB | radGen |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.3 | Identityservices | Services MIB. | ||
| 1.3.6.1.4.1.164.6.3.1 | Nodewfq | |||
| 1.3.6.1.4.1.164.6.3.1.1 | TablewfqTable | not-accessible | current | This table allows user to define several WFQ tables per output port. WFQ supports flows with different bandwidth requirements by giving each queue a weight tha… |
| 1.3.6.1.4.1.164.6.3.1.1.1 | RowwfqEntry | not-accessible | current | An entry in the Weighted Fair Queueing table. |
| 1.3.6.1.4.1.164.6.3.1.1.1.1 | ColumnwfqCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag… |
| 1.3.6.1.4.1.164.6.3.1.1.1.2 | ColumnwfqPrtIdx | not-accessible | current | This object indicates a unique port or interface number, for which Weighted Fair Queueing table is applicable . For numbering, see product's spec. For some pro… |
| 1.3.6.1.4.1.164.6.3.1.1.1.3 | ColumnwfqTblIdx | not-accessible | current | This object indicates which Weighted Fair Queueing (WFQ) Table is being used. There can be several tables. For FCD-155 User will select which one will be used … |
| 1.3.6.1.4.1.164.6.3.1.1.1.4 | ColumnwfqQueueIdx | not-accessible | current | This object indicates a queue index. For FCD-155, valid queues are 1..3. The 4th queue is not in MIB. Its weight will be RO, Calculated according to the sum of… |
| 1.3.6.1.4.1.164.6.3.1.1.1.5 | ColumnwfqRowStatus | read-create | current | This object enables Creation/Deletion of rows in the WFQ table. For FCD-155, rows are not created nor destroyed by user. |
| 1.3.6.1.4.1.164.6.3.1.1.1.6 | ColumnwfqWeightValue | read-create | current | This object indicates a relative weight value. User should make sure that the sum of values for all queues will not exceed 100% (sum should be BELOW 100% in or… |
| 1.3.6.1.4.1.164.6.3.1.1.1.7 | ColumnwfqSchedulingMode | read-create | current | This object controls which scheduling mode is used: Weighted Fair Queuing (WFQ) scheme or priority Queue (Strict Priority). |
| 1.3.6.1.4.1.164.6.3.1.1.1.8 | ColumnwfqMinRateAbsolute | read-create | current | The minimum absolute rate, in kbps, that should be allocated to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the v… |
| 1.3.6.1.4.1.164.6.3.1.1.1.9 | ColumnwfqMaxPacketSize | read-create | current | The size of the largest packet which can be received on this queue, specified in octets. Packets larger than this size will be discarded. |
| 1.3.6.1.4.1.164.6.3.2 | NodedscpMapping | |||
| 1.3.6.1.4.1.164.6.3.2.1 | TabledscpMappingTable | not-accessible | current | Mapping of DSCP value to a regenerated priority level. |
| 1.3.6.1.4.1.164.6.3.2.1.1 | RowdscpMappingEntry | not-accessible | current | An entry in dscpMappingTable. |
| 1.3.6.1.4.1.164.6.3.2.1.1.1 | ColumndscpMappingCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For… |
| 1.3.6.1.4.1.164.6.3.2.1.1.2 | ColumndscpMappingDscpIdx | not-accessible | current | DSCP value of the incoming IP packet |
| 1.3.6.1.4.1.164.6.3.2.1.1.3 | ColumndscpMappingRegenPriority | read-write | current | The Regenerated Priority level the incoming DSCP value is mapped to. For FCD-155, valid values are 0,1,2,3 |
| 1.3.6.1.4.1.164.6.3.3 | NodeifTeQos | |||
| 1.3.6.1.4.1.164.6.3.3.1 | TableifTeQosTable | not-accessible | current | The TE QOS Interface Table. |
| 1.3.6.1.4.1.164.6.3.3.1.1 | RowifTeQosEntry | not-accessible | current | An entry in the TE QOS Interface table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.1 | ColumnifTeQosIdx1 | not-accessible | current | This object indicates the 1st Index of the table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.2 | ColumnifTeQosIdx2 | not-accessible | current | This object indicates the 2nd Index of the table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.3 | ColumnifTeQosIdx3 | not-accessible | current | This object indicates the 3rd Index of the table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.4 | ColumnifTeQosParam | read-write | current | This object is used for QOS attributes of the entry's entities. |
| 1.3.6.1.4.1.164.6.3.3.1.1.5 | ColumnifTeQosParam2 | read-write | current | This object is used for 2nd group QOS attributes of the entry's entities. |
| 1.3.6.1.4.1.164.6.3.3.1.1.6 | ColumnifTeQosStatus | read-write | current | This object is used to create, activate and destroy entries of this table. |
| 1.3.6.1.4.1.164.6.3.4 | NodeportQos | |||
| 1.3.6.1.4.1.164.6.3.4.1 | TableprtPriorityTable | not-accessible | current | A table - Parameters per port per Priority . |
| 1.3.6.1.4.1.164.6.3.4.1.1 | RowprtPriorityEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.3.4.1.1.1 | ColumnprtPriorityIdx1 | not-accessible | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. or any other Index. |
| 1.3.6.1.4.1.164.6.3.4.1.1.2 | ColumnprtPriorityPrtIdx | not-accessible | current | This object indicates a unique Port Index. Refer to device specification for port Index. |
| 1.3.6.1.4.1.164.6.3.4.1.1.3 | ColumnprtPriorityIdx | not-accessible | current | This object indicates the Traffic Priority Index. |
| 1.3.6.1.4.1.164.6.3.4.1.1.4 | ColumnprtPriorityIngressRateLimit | read-write | current | The maximum rate permitted at Ingress of this port with this Traffic Priority, in Kbps. |
| 1.3.6.1.4.1.164.6.3.4.2 | TableprtQosTable | not-accessible | current | Port QoS (Quality of Service) table. |
| 1.3.6.1.4.1.164.6.3.4.2.1 | RowprtQosEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.3.4.2.1.1 | ColumnprtQosIdx | not-accessible | current | The first index of the table. This attribute might indicate the Idx of the Cnfg (1..255) being accessed ; Idx of 255 relates to the TmpCnfg or any other Index. |
| 1.3.6.1.4.1.164.6.3.4.2.1.2 | ColumnprtQosPrtIdx | not-accessible | current | This object indicates a unique Port Index. Refer to device specification for port Index. |
| 1.3.6.1.4.1.164.6.3.4.2.1.3 | ColumnprtQosDirection | not-accessible | current | This object indicates the port's QoS Direction. |
| 1.3.6.1.4.1.164.6.3.4.2.1.4 | ColumnprtQosRateLimitPacketType | read-write | current | This object indicates the Type of Packets on which Rate Limitation is applied. |
| 1.3.6.1.4.1.164.6.3.4.2.1.5 | ColumnprtQosRateLimitCIR | read-write | current | This object indicates the port's CIR (Committed Information Rate) in Kbps. Value=0 represents best effort. |
| 1.3.6.1.4.1.164.6.3.4.2.1.6 | ColumnprtQosRateLimitCBS | read-write | current | This object indicates the port's CBS (Committed Burst Size) in KB. Value=0 represents best effort. |
| 1.3.6.1.4.1.164.6.3.4.2.1.7 | ColumnprtQosRateLimitEIR | read-write | current | This object indicates the port's EIR (Excess Information Rate) in Kbps. |
| 1.3.6.1.4.1.164.6.3.4.2.1.8 | ColumnprtQosRateLimitEBS | read-write | current | This object indicates the port's EBS (Excess Burst Size) in KB. |
| 1.3.6.1.4.1.164.6.3.5 | NodeprtTrafficClass | |||
| 1.3.6.1.4.1.164.6.3.5.1 | TableportTrafficClassTable | not-accessible | current | Mapping of port to Traffic Class level. |
| 1.3.6.1.4.1.164.6.3.5.1.1 | RowportTrafficClassEntry | not-accessible | current | An entry in portTrafficClassTable. |
| 1.3.6.1.4.1.164.6.3.5.1.1.1 | ColumnportTrafficClassIdx1 | not-accessible | current | This attribute indicates the 1st index of the table. This may be the Idx of the Cnfg(1..255) being accessed; Idx of 255 relates to the TmpCnfg, or any other In… |
| 1.3.6.1.4.1.164.6.3.5.1.1.2 | ColumnportTrafficClassPortIdx | not-accessible | current | This object indicates a unique Port Index. Refer to device specification for port Index. |
| 1.3.6.1.4.1.164.6.3.5.1.1.3 | ColumnportTrafficClass | read-write | current | This object indicates the Traffic Class level of this port. |
| 1.3.6.1.4.1.164.6.3.6 | TableserviceTable | not-accessible | current | Table of services. |
| 1.3.6.1.4.1.164.6.3.6.1 | RowserviceEntry | not-accessible | current | An entry in the Service Table. |
| 1.3.6.1.4.1.164.6.3.6.1.1 | ColumnflowIndex | not-accessible | current | Defines the Flow ID the service is associated to. |
| 1.3.6.1.4.1.164.6.3.6.1.2 | ColumnserviceIndex | not-accessible | current | Defines the Service ID - according to the CoS. |
| 1.3.6.1.4.1.164.6.3.6.1.3 | ColumnserviceRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.6.1.4 | ColumnserviceName | read-create | current | This attribute defines the service name. |
| 1.3.6.1.4.1.164.6.3.6.1.5 | ColumnserviceBwProfileId | read-create | current | This variable holds the index of the Ingress BW profile assigned to that service. |
| 1.3.6.1.4.1.164.6.3.7 | TableevcCosTable | not-accessible | current | This table defines mapping of Ethernet Virtual Connection (EVC) ID to Class of Service (CoS) ID |
| 1.3.6.1.4.1.164.6.3.7.1 | RowevcCosEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.3.7.1.1 | ColumnevcCosCnfgIdx | not-accessible | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.6.3.7.1.2 | ColumnevcCosEvcIdx | not-accessible | current | This attribute indicates EVC Id. |
| 1.3.6.1.4.1.164.6.3.7.1.3 | ColumnevcCosRowStatus | read-create | current | This attribute allows to create/delete a row in this table. |
| 1.3.6.1.4.1.164.6.3.7.1.5 | ColumnevcCosEvcName | read-create | current | A string that identifies the EVC. It should be unique in the Maintenance Domain (i.e., in the managed network) Used as MEG ID field in OAM messages. |
| 1.3.6.1.4.1.164.6.3.7.1.6 | ColumnevcCosSpVlanId | read-create | current | This object indicates the SP (Service Provider) VLAN used when sending an OAM message for the specified EVC. |
| 1.3.6.1.4.1.164.6.3.8 | TableserviceStatTable | not-accessible | current | Service statistics table. |
| 1.3.6.1.4.1.164.6.3.8.1 | RowserviceStatEntry | not-accessible | current | An entry in the Service Statistics Table. |
| 1.3.6.1.4.1.164.6.3.8.1.1 | ColumnserviceStatDirection | not-accessible | current | The direction in which the measurement is taken. |
| 1.3.6.1.4.1.164.6.3.8.1.2 | ColumnsrvForwardGreenPackets | read-only | current | This attribute displays the counted number of forwarded packets that where marked Green. |
| 1.3.6.1.4.1.164.6.3.8.1.3 | ColumnsrvForwardGreenPacketsOverflow | read-only | current | This attribute displays the number of times that the forwardGreenPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.4 | ColumnsrvForwardYellowPackets | read-only | current | This attribute displays the counted number of forwarded packets that where marked Yellow. |
| 1.3.6.1.4.1.164.6.3.8.1.5 | ColumnsrvForwardYellowPacketsOverflow | read-only | current | This attribute displays the number of times that the forwardYellowPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.6 | ColumnsrvDiscardGreenPackets | read-only | current | This attribute displays the counted number of discarded packets that where marked Green. |
| 1.3.6.1.4.1.164.6.3.8.1.7 | ColumnsrvDiscardGreenPacketsOverflow | read-only | current | This attribute displays the number of times that the discardGreenPacket counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.8 | ColumnsrvDiscardYellowRedPackets | read-only | current | This attribute displays the counted number of discarded packets that where marked Yellow or Red. |
| 1.3.6.1.4.1.164.6.3.8.1.9 | ColumnsrvDiscardYellowRedPacketsOverflow | read-only | current | This attribute displays the number of times that the discardYellowRedPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.10 | ColumnsrvForwardGreenBytes | read-only | current | This attribute displays the counted number of forwarded bytes that where marked Green. |
| 1.3.6.1.4.1.164.6.3.8.1.11 | ColumnsrvForwardGreenBytesOverflow | read-only | current | This attribute displays the number of times that the forwardGreenBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.12 | ColumnsrvForwardYellowBytes | read-only | current | This attribute displays the counted number of forwarded bytes that where marked Yellow. |
| 1.3.6.1.4.1.164.6.3.8.1.13 | ColumnsrvForwardYellowBytesOverflow | read-only | current | This attribute displays the number of times that the forwardYellowBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.14 | ColumnsrvDiscardGreenBytes | read-only | current | This attribute displays the counted number of discarded bytes that where marked Green. |
| 1.3.6.1.4.1.164.6.3.8.1.15 | ColumnsrvDiscardGreenBytesOverflow | read-only | current | This attribute displays the number of times that the discardGreenBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.16 | ColumnsrvDiscardYellowRedBytes | read-only | current | This attribute displays the counted number of discarded bytes that where marked Yellow or Red. |
| 1.3.6.1.4.1.164.6.3.8.1.17 | ColumnsrvDiscardYellowRedBytesOverflow | read-only | current | This attribute displays the number of times that the discardYellowRedBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.18 | ColumnsrvResetStatsCmd | read-create | current | Reset statistic counters of the service. |
| 1.3.6.1.4.1.164.6.3.8.1.19 | ColumnsrvDiscardYellowPackets | read-only | current | This attribute displays the counted number of discarded packets that where marked Yellow. |
| 1.3.6.1.4.1.164.6.3.8.1.20 | ColumnsrvDiscardYellowPacketsOverflow | read-only | current | This attribute displays the number of times that the discardYellowPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.21 | ColumnsrvDiscardYellowBytes | read-only | current | This attribute displays the counted number of discarded bytes that where marked Yellow. |
| 1.3.6.1.4.1.164.6.3.8.1.22 | ColumnsrvDiscardYellowBytesOverflow | read-only | current | This attribute displays the number of times that the discardYellowBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.23 | ColumnsrvDiscardRedPackets | read-only | current | This attribute displays the counted number of discarded packets that where marked Red. |
| 1.3.6.1.4.1.164.6.3.8.1.24 | ColumnsrvDiscardRedPacketsOverflow | read-only | current | This attribute displays the number of times that the discardRedPackets counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.8.1.25 | ColumnsrvDiscardRedBytes | read-only | current | This attribute displays the counted number of discarded bytes that where marked Red. |
| 1.3.6.1.4.1.164.6.3.8.1.26 | ColumnsrvDiscardRedBytesOverflow | read-only | current | This attribute displays the number of times that the discardRedBytes counter has overflowed. |
| 1.3.6.1.4.1.164.6.3.9 | NodemappingProfileObjects | |||
| 1.3.6.1.4.1.164.6.3.9.1 | TableflowMappingProfileTable | not-accessible | current | This table holds flow mapping profiles. |
| 1.3.6.1.4.1.164.6.3.9.1.1 | RowflowMappingProfileEntry | not-accessible | current | Each entry in this table describes one Flow mapping profile with one of its Flow Mapping supported, according to the Priority order. The information includes a… |
| 1.3.6.1.4.1.164.6.3.9.1.1.1 | ColumnflowMappingProfileIndex | not-accessible | current | A running index for the Flow Mapping Profile table. |
| 1.3.6.1.4.1.164.6.3.9.1.1.2 | ColumnflowMappingProfilePriority | not-accessible | current | The priority of the selected Mapping. |
| 1.3.6.1.4.1.164.6.3.9.1.1.3 | ColumnflowMappingProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.9.1.1.4 | ColumnflowMappingProfileNumOfMaps | read-create | current | This attribute determines the number of the mappings associated to the Flow Mapping Profile. |
| 1.3.6.1.4.1.164.6.3.9.1.1.5 | ColumnflowMappingProfileMapIndex | read-create | deprecated | This attribute holds a reference to the mapping index. It specifies the mapping selected for the Mapping Profile for the selected Priority. When flowMappingPro… |
| 1.3.6.1.4.1.164.6.3.9.1.1.6 | ColumnflowMappingProfileName | read-create | current | This attribute defines the name assigned to flowMappingIndex profile. |
| 1.3.6.1.4.1.164.6.3.9.1.1.7 | ColumnflowMappingProfileCondition | read-create | current | This attribute defines the condition between the mappings/rules associated to this Flow Mapping Profile. |
| 1.3.6.1.4.1.164.6.3.9.2 | TableqosFlowMappingTable | not-accessible | current | A table of Flow Mapping. |
| 1.3.6.1.4.1.164.6.3.9.2.1 | RowqosFlowMappingEntry | not-accessible | current | Each entry in this table describes one Flow Mapping. The information includes combination (AND function) of all the classifications, as defined in the qosFlowM… |
| 1.3.6.1.4.1.164.6.3.9.2.1.1 | ColumnqosFlowMappingIdx1 | not-accessible | current | - In case the table is accessed via flowMappingProfileTable this is a running index for the QoS Flow Mapping table. - In case the table is not accessed via flo… |
| 1.3.6.1.4.1.164.6.3.9.2.1.2 | ColumnqosFlowMappingIdx2 | not-accessible | current | An index for the QoS Flow Mapping table. - In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not ac… |
| 1.3.6.1.4.1.164.6.3.9.2.1.3 | ColumnqosFlowMappingIdx3 | not-accessible | current | An index for the QoS Flow Mapping table. - In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not ac… |
| 1.3.6.1.4.1.164.6.3.9.2.1.4 | ColumnqosFlowMappingRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.9.2.1.5 | ColumnqosFlowMappingCriteria | read-create | current | This attribute determines upon which criterion the flow will be mapped. |
| 1.3.6.1.4.1.164.6.3.9.2.1.6 | ColumnqosFlowMappingIeee802dot1p | read-create | current | This attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different 802.1 P-bit value. Setting '1' to the bit means… |
| 1.3.6.1.4.1.164.6.3.9.2.1.7 | ColumnqosFlowMappingTos | read-create | current | This attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different TOS value. Setting '1' to the bit means that th… |
| 1.3.6.1.4.1.164.6.3.9.2.1.8 | ColumnqosFlowMappingFromDscp | read-create | current | This attribute determines the first DSCP value to compare with in a range. It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1. |
| 1.3.6.1.4.1.164.6.3.9.2.1.9 | ColumnqosFlowMappingToDscp | read-create | current | This attribute determines the first DSCP value to compare with in a range. It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1. |
| 1.3.6.1.4.1.164.6.3.9.2.1.10 | ColumnqosFlowMappingFromVlanId | read-create | current | This attribute determines the first VLAN ID value to compare with in a range. It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1. |
| 1.3.6.1.4.1.164.6.3.9.2.1.11 | ColumnqosFlowMappingToVlanId | read-create | current | This attribute determines the last VLAN ID value to compare with in a range. It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1. |
| 1.3.6.1.4.1.164.6.3.9.2.1.12 | ColumnqosFlowMappingFromSrcMacAddr | read-create | current | This attribute determines the first source MAC address to compare with in a range. It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria… |
| 1.3.6.1.4.1.164.6.3.9.2.1.13 | ColumnqosFlowMappingToSrcMacAddr | read-create | current | This attribute determines the last source MAC address to compare with in a range. It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria … |
| 1.3.6.1.4.1.164.6.3.9.2.1.14 | ColumnqosFlowMappingFromDestMacAddr | read-create | current | This attribute determines the first destination MAC address to compare with in a range. It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCr… |
| 1.3.6.1.4.1.164.6.3.9.2.1.15 | ColumnqosFlowMappingToDestMacAddr | read-create | current | This attribute determines the last destination MAC address to compare with in a range. It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCri… |
| 1.3.6.1.4.1.164.6.3.9.2.1.16 | ColumnqosFlowMappingFromSrcIpAddr | read-create | deprecated | This attribute determines the first source IP address to compare with in a range. It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria e… |
| 1.3.6.1.4.1.164.6.3.9.2.1.17 | ColumnqosFlowMappingToSrcIpAddr | read-create | deprecated | This attribute determines the last source IP address to compare with in a range. It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria eq… |
| 1.3.6.1.4.1.164.6.3.9.2.1.18 | ColumnqosFlowMappingFromDestIpAddr | read-create | deprecated | This attribute determines the first destination IP address to compare with in a range. It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCrit… |
| 1.3.6.1.4.1.164.6.3.9.2.1.19 | ColumnqosFlowMappingToDestIpAddr | read-create | deprecated | This attribute determines the last destination IP address to compare with in a range. It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCrite… |
| 1.3.6.1.4.1.164.6.3.9.2.1.20 | ColumnqosFlowMappingFromTcpSrcPort | read-create | current | This attribute determines the first TCP source port to compare with in a range. It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria eq… |
| 1.3.6.1.4.1.164.6.3.9.2.1.21 | ColumnqosFlowMappingToTcpSrcPort | read-create | current | This attribute determines the last TCP source port to compare with in a range. It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria equ… |
| 1.3.6.1.4.1.164.6.3.9.2.1.22 | ColumnqosFlowMappingFromTcpDestPort | read-create | current | This attribute determines the first TCP destination port to compare with in a range. It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCrite… |
| 1.3.6.1.4.1.164.6.3.9.2.1.23 | ColumnqosFlowMappingToTcpDestPort | read-create | current | This attribute determines the last TCP destination port to compare with in a range. It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCriter… |
| 1.3.6.1.4.1.164.6.3.9.2.1.24 | ColumnqosFlowMappingFromUdpSrcPort | read-create | current | This attribute determines the first UDP source port to compare with in a range. It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria e… |
| 1.3.6.1.4.1.164.6.3.9.2.1.25 | ColumnqosFlowMappingToUdpSrcPort | read-create | current | This attribute determines the last UDP source port to compare with in a range. It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria eq… |
| 1.3.6.1.4.1.164.6.3.9.2.1.26 | ColumnqosFlowMappingFromUdpDestPort | read-create | current | This attribute determines the first UDP destination port to compare with in a range. It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCrit… |
| 1.3.6.1.4.1.164.6.3.9.2.1.27 | ColumnqosFlowMappingToUdpDestPort | read-create | current | This attribute determines the last UDP destination port to compare with in a range. It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCrite… |
| 1.3.6.1.4.1.164.6.3.9.2.1.28 | ColumnqosFlowMappingFromIpPrecedence | read-create | current | This attribute determines the first IpPrecedence value to compare with in a range. It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCrite… |
| 1.3.6.1.4.1.164.6.3.9.2.1.29 | ColumnqosFlowMappingToIpPrecedence | read-create | current | This attribute determines the last IpPrecedence value to compare with in a range. It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCriter… |
| 1.3.6.1.4.1.164.6.3.9.2.1.30 | ColumnqosFlowMappingInnerIeee802dot1p | read-create | current | This attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different inner 802.1 P-bit value. Setting '1' to the bit… |
| 1.3.6.1.4.1.164.6.3.9.2.1.31 | ColumnqosFlowMappingFromInnerVlanId | read-create | current | This attribute determines the first inner VLAN ID value to compare with in a range. It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriter… |
| 1.3.6.1.4.1.164.6.3.9.2.1.32 | ColumnqosFlowMappingToInnerVlanId | read-create | current | This attribute determines the last inner VLAN ID value to compare with in a range. It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriteri… |
| 1.3.6.1.4.1.164.6.3.9.2.1.33 | ColumnqosFlowMappingEtherType | read-create | current | Determines the Tag Protocol Identifier (in Hex). For example: 0x8100 (C-TAG) 0x88A8 (S-TAG) It is relevant only in case the etherType bit (17) in qosFlowMappin… |
| 1.3.6.1.4.1.164.6.3.10 | TablecosProfileTable | not-accessible | current | Class of Service Profile table. Each profile holds a priority method, and a mapping function that maps the priority values (range according to the method) into… |
| 1.3.6.1.4.1.164.6.3.10.1 | RowcosProfileEntry | not-accessible | current | A conceptual row where each row contains one CoS attributes. |
| 1.3.6.1.4.1.164.6.3.10.1.1 | ColumncosProfileIndex | not-accessible | current | Defines the CoS Profile ID. |
| 1.3.6.1.4.1.164.6.3.10.1.2 | ColumncosProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.10.1.3 | ColumncosProfileCosMethod | read-create | current | Defines the priority method upon CoS mapping is done. |
| 1.3.6.1.4.1.164.6.3.10.1.4 | ColumncosProfileName | read-create | current | This attribute defines the name assigned to CoS profile. |
| 1.3.6.1.4.1.164.6.3.10.1.5 | ColumncosProfileCosMapping | read-create | current | This attribute defines the value of the CoS that is assigned for each priority. The number of the valid octets depends upon the priority method selected: Octet… |
| 1.3.6.1.4.1.164.6.3.11 | NodequeueProfileObjects | |||
| 1.3.6.1.4.1.164.6.3.11.1 | TableqProfileTable | not-accessible | current | This table defines the profiles for a cluster of queues. |
| 1.3.6.1.4.1.164.6.3.11.1.1 | RowqProfileEntry | not-accessible | current | A conceptual row where each row contains one Queue Cluster attribute. |
| 1.3.6.1.4.1.164.6.3.11.1.1.1 | ColumnqProfileIndex | not-accessible | current | Defines the Queue Cluster Profile ID. |
| 1.3.6.1.4.1.164.6.3.11.1.1.2 | ColumnqProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.11.1.1.3 | ColumnqProfileName | read-create | current | This attribute holds the name of the Queue cluster profile. |
| 1.3.6.1.4.1.164.6.3.11.1.1.4 | ColumnqProfileNumberOfInternalQ | read-create | current | This attribute holds the number of the internal queue profiles that are pointed by qProfileInternalQProfile. |
| 1.3.6.1.4.1.164.6.3.11.1.1.5 | ColumnqProfileInternalQProfile | read-create | current | This attribute is a vector that holds the indices to the queue profiles in the qInternalProfileTable. The index length depends on specific product realization … |
| 1.3.6.1.4.1.164.6.3.11.2 | TableqInternalProfileTable | not-accessible | current | This table holds queue profiles. |
| 1.3.6.1.4.1.164.6.3.11.2.1 | RowqInternalProfileEntry | not-accessible | current | A conceptual row where each row contains one Queue attribute. |
| 1.3.6.1.4.1.164.6.3.11.2.1.1 | ColumnqInternalProfileIndex | not-accessible | current | Defines the Queue Profile ID. |
| 1.3.6.1.4.1.164.6.3.11.2.1.2 | ColumnqInternalProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.11.2.1.3 | ColumnqInternalProfileScheduling | read-create | current | This attribute determines the queue scheduling method. |
| 1.3.6.1.4.1.164.6.3.11.2.1.4 | ColumnqInternalProfileWFQWeight | read-create | current | This attribute determines the weight that each WFQ (Weighted Fair Queue) participant gets. It is applicable only when scheduling is configured to WFQ. |
| 1.3.6.1.4.1.164.6.3.11.2.1.5 | ColumnqInternalProfileQueueLength | read-create | current | This attribute determines the length of the queue. |
| 1.3.6.1.4.1.164.6.3.11.2.1.6 | ColumnqInternalProfileWredStartDropThresh | read-create | deprecated | This attribute determines the length that the queue (Start Value) must reach before the packets colored yellow will start being dropped by the WRED (Weighted R… |
| 1.3.6.1.4.1.164.6.3.11.2.1.7 | ColumnqInternalProfileWredDropAllThresh | read-create | deprecated | This attribute determines the length that the queue (Stop Value) must reach before the WRED (Weighted Random Early Detection) shaper mechanism stops dropping r… |
| 1.3.6.1.4.1.164.6.3.11.2.1.8 | ColumnqInternalProfileWredDropProbability | read-create | deprecated | This attribute determines the percentage of packets that are being dropped at the point when the length of the queue reaches the Stop value. So, effectively, t… |
| 1.3.6.1.4.1.164.6.3.11.2.1.9 | ColumnqInternalProfileRateLimit | read-create | current | This attribute determines the Rate Limit of the queue in Kbps. Value=0 represents best effort. |
| 1.3.6.1.4.1.164.6.3.11.2.1.10 | ColumnqInternalProfileShaperProfile | read-create | current | This attribute defines the Shaper Profile (bwProfileIndex from bwProfileTable) assigned to this qInternalProfile. Valid range of bwProfileIndex for Shaper Prof… |
| 1.3.6.1.4.1.164.6.3.11.2.1.11 | ColumnqInternalProfileWredProfile | read-create | current | This attribute defines the WRED Profile (wredProfileIndex from wredProfileTable) assigned to this qInternalProfile. If set to '0', no profile is assigned to th… |
| 1.3.6.1.4.1.164.6.3.11.2.1.13 | ColumnqInternalProfileFrameBuffers | read-create | current | This attribute determines the number of frame buffers assigned to a queue. |
| 1.3.6.1.4.1.164.6.3.11.3 | TablequeueGroupTable | not-accessible | current | This table defines the queue groups/blocks,their level and connections between them. |
| 1.3.6.1.4.1.164.6.3.11.3.1 | RowqueueGroupEntry | not-accessible | current | A conceptual row where each row contains one Queue group. |
| 1.3.6.1.4.1.164.6.3.11.3.1.1 | ColumnqueueGroupName | not-accessible | current | Defines the Queue Group unique name. |
| 1.3.6.1.4.1.164.6.3.11.3.1.2 | ColumnqueueGroupQBlockLevel | not-accessible | current | This attribute holds the Level of the Queue Block. First level is 1. NA=2^32-1. |
| 1.3.6.1.4.1.164.6.3.11.3.1.3 | ColumnqueueGroupQBlockIdx | not-accessible | current | This attribute holds the ID of the Queue Block. NA=2^32-1. |
| 1.3.6.1.4.1.164.6.3.11.3.1.4 | ColumnqueueGroupRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.11.3.1.5 | ColumnqueueGroupQBlockProfile | read-create | current | This attribute defines the Queue profile assigned to this Queue Block. This object points to qProfileIndex in qProfileTable. |
| 1.3.6.1.4.1.164.6.3.11.3.1.6 | ColumnqueueGroupQBlockShaperProfile | read-create | current | This attribute defines the Shaper profile assigned to this Queue Block. |
| 1.3.6.1.4.1.164.6.3.11.3.1.7 | ColumnqueueGroupPointToQBlock | read-create | current | This attribute defines the Queue Block name of the next Queue Block level that is pointed by this Queue Block. |
| 1.3.6.1.4.1.164.6.3.11.3.1.8 | ColumnqueueGroupPointToInternalQueue | read-create | current | This attribute defines the internal queue within queueGroupPointToQBlock that is pointed by this Queue Block. |
| 1.3.6.1.4.1.164.6.3.11.3.1.9 | ColumnqueueGroupQBlockName | read-create | current | This attribute holds the name of the Queue Block. |
| 1.3.6.1.4.1.164.6.3.12 | TablemarkingProfileTable | not-accessible | current | Marking profile table. Each profile holds a marking function which converts CoS values to Service Provider priority values. |
| 1.3.6.1.4.1.164.6.3.12.1 | RowmarkingProfileEntry | not-accessible | current | A conceptual row where each row contains one Marking attribute. |
| 1.3.6.1.4.1.164.6.3.12.1.1 | ColumnmarkingProfileIndex | not-accessible | current | Defines the Marking Profile ID. |
| 1.3.6.1.4.1.164.6.3.12.1.2 | ColumnmarkingProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.12.1.3 | ColumnmarkingProfileName | read-create | current | This attribute defines the unique name assigned to the marking profile. |
| 1.3.6.1.4.1.164.6.3.12.1.4 | ColumnmarkingSpVlanPBit | read-create | current | This attribute defines the value of the SP VLAN P-bit that is assigned for each frame according to the value of markingProfileMethod parameter : Octet 0 corres… |
| 1.3.6.1.4.1.164.6.3.12.1.5 | ColumnmarkingProfileMethod | read-create | current | This attribute defines the method that marking is done with. |
| 1.3.6.1.4.1.164.6.3.12.1.6 | ColumnmarkingProfileColorAware | read-create | current | This parameter will be supported only for products that support priority marking according to the policer color (e.g ETX-202A FROM R1.67): This attribute defin… |
| 1.3.6.1.4.1.164.6.3.12.1.7 | ColumnmarkingProfileDeiAware | read-create | current | This attribute defines the DEI usage. aware - Profile include DEI mapping - setting the DEI according to its color, map each priority to specific DEI notAware … |
| 1.3.6.1.4.1.164.6.3.12.1.8 | ColumnmarkingProfileDeiColor | read-create | current | This attribute defines the DEI bit value that is assigned for each frame according to the markingProfileMethod value: Octet 0 corresponds to value 0 of P-bit/D… |
| 1.3.6.1.4.1.164.6.3.12.1.9 | ColumnmarkingProfileDscpColor | read-create | current | The input DSCP value marked according to the policer color. The first 64 octets are for frames that their policer color is Green (octets 0-63 correspond to inp… |
| 1.3.6.1.4.1.164.6.3.12.1.10 | ColumnmarkingProfileMarkedField | read-create | current | This attribute indicates which field in the outgoing frame is modified by this profile. The values userPorts(6) and internalCos(7) are not applicable for this … |
| 1.3.6.1.4.1.164.6.3.13 | TablewredProfileTable | not-accessible | current | This table holds WRED(Weighted Random Early Detection/Discard) profiles. |
| 1.3.6.1.4.1.164.6.3.13.1 | RowwredProfileEntry | not-accessible | current | An entry in the WRED profile Table. |
| 1.3.6.1.4.1.164.6.3.13.1.1 | ColumnwredProfileIndex | not-accessible | current | Defines the WRED Profile ID. |
| 1.3.6.1.4.1.164.6.3.13.1.2 | ColumnwredProfileColor | not-accessible | current | Defines the color of the packets that their WRED thresholds are defined in this profile. |
| 1.3.6.1.4.1.164.6.3.13.1.3 | ColumnwredProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.13.1.4 | ColumnwredProfileName | read-create | current | This attribute defines the unique name assigned to the WRED profile. |
| 1.3.6.1.4.1.164.6.3.13.1.5 | ColumnwredProfileMinThreshold | read-create | current | This attribute determines the queue usage minimum threshold in percent. Above it the packets colored yellow will start being dropped by the WRED (Weighted Rand… |
| 1.3.6.1.4.1.164.6.3.13.1.6 | ColumnwredProfileMaxThreshold | read-create | current | This attribute determines the queue usage maximum threshold in percent. Above it shaper mechanism stops dropping randomly, and just drops all further packets m… |
| 1.3.6.1.4.1.164.6.3.13.1.7 | ColumnwredProfileMaxProbability | read-create | current | This attribute determines the percentage of packets to be dropped at the point when the queue usage reaches wredProfileMaxThreshold. The behavior is linear, so… |
| 1.3.6.1.4.1.164.6.3.14 | TablesviTable | not-accessible | current | Service Virtual Interface (SVI) Table. This table holds SVI specific parameters and is augmenting the generic attributes of the IF-MIB. |
| 1.3.6.1.4.1.164.6.3.14.1 | RowsviEntry | not-accessible | current | An entry in the SVI Table. An entry is automatically created by the agent when a new SVI is defined in the ifCreateTable. |
| 1.3.6.1.4.1.164.6.3.14.1.1 | ColumnsviIndex | not-accessible | current | This object indicates the SVI index. Its value is equal to the ifIndex of the associated entry in the ifTable. |
| 1.3.6.1.4.1.164.6.3.14.1.5 | ColumnsviBoundToType | read-write | current | Holds the type of the SVI according to the service it is bounded to. |
| 1.3.6.1.4.1.164.6.3.15 | TablecosInternalProfileTable | not-accessible | current | Internal Class of Service Profile table. Each profile holds a priority method, and a mapping function that maps the priority values (range according to the met… |
| 1.3.6.1.4.1.164.6.3.15.1 | RowcosInternalProfileEntry | not-accessible | current | A conceptual row where each row contains one Internal CoS attributes. |
| 1.3.6.1.4.1.164.6.3.15.1.1 | ColumncosInternalProfileIndex | not-accessible | current | Defines the internal CoS Profile ID. |
| 1.3.6.1.4.1.164.6.3.15.1.2 | ColumncosInternalProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.6.3.15.1.3 | ColumncosInternalProfileCosMethod | read-create | current | Defines the priority method upon Internal CoS mapping is done. |
| 1.3.6.1.4.1.164.6.3.15.1.4 | ColumncosInternalProfileName | read-create | current | This attribute defines the name assigned to Internal CoS profile. |
| 1.3.6.1.4.1.164.6.3.15.1.5 | ColumncosInternalProfileCosMapping | read-create | current | This attribute defines the value of the Internal CoS that is assigned for each priority. The number of the valid octets depends upon the priority method select… |
| 1.3.6.1.4.1.164.6.3.15.1.6 | ColumncosInternalProfileUntaggedMapping | read-create | current | This attribute defines the CoS mapping of untagged frames. This object is relevant only when cosInternalProfileCosMethod is set to ieee802dot1p(2). |
| 1.3.6.1.4.1.164.6.3.15.1.7 | ColumncosInternalProfileNonIpMapping | read-create | current | This attribute defines the CoS mapping of non-IP packets. This object is relevant only when cosInternalProfileCosMethod is set to dscp(4). |
| 1.3.6.1.4.1.164.6.3.16 | TablecolorMappingProfileTable | not-accessible | current | Color Mapping Profile table. Each profile holds a priority method and a mapping function that maps the priority values (range according to the method) into col… |
| 1.3.6.1.4.1.164.6.3.16.1 | RowcolorMappingProfileEntry | not-accessible | current | The table entry. |
| 1.3.6.1.4.1.164.6.3.16.1.1 | ColumncolorMappingProfileIndex | not-accessible | current | Defines the Color Mapping Profile ID. |
| 1.3.6.1.4.1.164.6.3.16.1.2 | ColumncolorMappingProfileRowStatus | read-create | current | Table row status. It is based on the standard RowStatus definition of RFC2579. |
| 1.3.6.1.4.1.164.6.3.16.1.3 | ColumncolorMappingProfileMethod | read-create | current | Defines the priority method upon Color Mapping is done. |
| 1.3.6.1.4.1.164.6.3.16.1.4 | ColumncolorMappingProfileName | read-create | current | This attribute defines the name assigned to Color Mapping profile. |
| 1.3.6.1.4.1.164.6.3.16.1.5 | ColumncolorMappingProfileMapping | read-create | current | This attribute defines the value of the color that is assigned for each priority: - green (0) - yellow (1) The number of the valid octets depends on the priori… |
| 1.3.6.1.4.1.164.6.3.17 | NodeportClassifierObjects | |||
| 1.3.6.1.4.1.164.6.3.17.1 | NodeportClassifierScalarObjects | |||
| 1.3.6.1.4.1.164.6.3.17.1.1 | ScalarportClassifierRemainingActions | read-only | current | The number of remaining entries in the device H/W resources that may be used for additional port classifier actions. |
| 1.3.6.1.4.1.164.6.3.17.2 | TableportClassifierTable | not-accessible | current | This table contains a list of classifiers used at the port level. The port classifiers are also called Advanced ACLs (A2CL). |
| 1.3.6.1.4.1.164.6.3.17.2.1 | RowportClassifierEntry | not-accessible | current | An entry in port classifier table. A row can be deleted unconditionally. When a row is deleted all the corresponding rows in the portClassifierActionTable, por… |
| 1.3.6.1.4.1.164.6.3.17.2.1.1 | ColumnportClassifierRowStatus | read-create | current | This object enables creation and deletion of port classifiers. |
| 1.3.6.1.4.1.164.6.3.17.2.1.2 | ColumnportClassifierNumberOfActions | read-only | current | The number of actions (entries) for this interface in the portClassifierActionTable. The initial value is zero. |
| 1.3.6.1.4.1.164.6.3.17.2.1.3 | ColumnportClassifierHighSequenceNumber | read-only | current | The highest used sequence number for this interface in the portClassifierActionTable and portClassifierCommentTable. This number is updated upon row activation… |
| 1.3.6.1.4.1.164.6.3.17.2.1.4 | ColumnportClassifierResequenceCmd | read-create | current | Resequence command, specifying step between sequence numbers. For example, when resequence command with value of 100 is given, new sequence numbers shall be 10… |
| 1.3.6.1.4.1.164.6.3.17.3 | TableportClassifierActionTable | not-accessible | current | This table contains a list of port classifier rules (ACL rules). A rule has a match or drop action. |
| 1.3.6.1.4.1.164.6.3.17.3.1 | RowportClassifierActionEntry | not-accessible | current | An entry in the port classifier rules table. When a row is created/deleted , a corresponding row (where portClassifierInvSequenceNumber equals portClassifierAc… |
| 1.3.6.1.4.1.164.6.3.17.3.1.1 | ColumnportClassifierActionIndex | not-accessible | current | A running number for the port classifier rules. |
| 1.3.6.1.4.1.164.6.3.17.3.1.2 | ColumnportClassifierActionRowStatus | read-create | current | This object enables creation and deletion of port classifiers rules. |
| 1.3.6.1.4.1.164.6.3.17.3.1.3 | ColumnportClassifierActionSequenceNumber | read-create | current | The sequence number (priority) of the rule. It must be unique across all rows of this table and of portClassifierCommentTable. The default value is portClassif… |
| 1.3.6.1.4.1.164.6.3.17.3.1.4 | ColumnportClassifierActionType | read-create | current | The type of the action. |
| 1.3.6.1.4.1.164.6.3.17.3.1.5 | ColumnportClassifierActionFlowName | read-create | current | The name of the associated flow. When the portClassifierActionType is match(1), the name cannot be a null string. When the portClassifierActionType is drop(2),… |
| 1.3.6.1.4.1.164.6.3.17.3.1.6 | ColumnportClassifierActionFlowIndex1 | read-only | current | The value of rad.flowIdx1 of the associated flow. If the associated flow does not exist, zero is returned. |
| 1.3.6.1.4.1.164.6.3.17.3.1.7 | ColumnportClassifierActionFlowIndex2 | read-only | current | The value of rad.flowIdx2 of the associated flow. If the associated flow does not exist, zero is returned. |
| 1.3.6.1.4.1.164.6.3.17.3.1.8 | ColumnportClassifierActionCos | read-create | current | The CoS assigned to the rule. A value of 255 means the CoS mapping profile of portClassifierActionCosMapProfile is used instead of this object. No CoS is assig… |
| 1.3.6.1.4.1.164.6.3.17.3.1.9 | ColumnportClassifierActionCosMapProfile | read-create | current | The profile used to map frames that match the rule to CoS value. The configured value is the index of the corresponding entry in cosInternalProfileTable. A val… |
| 1.3.6.1.4.1.164.6.3.17.3.1.10 | ColumnportClassifierActionHits | read-only | current | The number of incoming frames that matched the rule. This counter counts forwarded or dropped frames i.e. regardless of the value of portClassifierActionType. |
| 1.3.6.1.4.1.164.6.3.17.3.1.11 | ColumnportClassifierActionCriteria | read-create | current | The criteria for matching incoming frames. Several fields may be selected at once. However, no more than one of the fields tos(9), dscp(10) and ipPrecedence(11… |
| 1.3.6.1.4.1.164.6.3.17.3.1.12 | ColumnportClassifierActionDstMacAddressLow | read-create | current | The lowest destination MAC address to compare with in a range. The value should be lower than or equal to portClassifierActionDstMacAddressHigh. This object is… |
| 1.3.6.1.4.1.164.6.3.17.3.1.13 | ColumnportClassifierActionDstMacAddressHigh | read-create | current | The highest destination MAC address to compare with in a range. The value should be higher than or equal to portClassifierActionDstMacAddressLow. This object i… |
| 1.3.6.1.4.1.164.6.3.17.3.1.14 | ColumnportClassifierActionSrcMacAddressLow | read-create | current | The lowest source MAC address to compare with in a range. The value should be lower than or equal to portClassifierActionSrcMacAddressHigh. This object is rele… |
| 1.3.6.1.4.1.164.6.3.17.3.1.15 | ColumnportClassifierActionSrcMacAddressHigh | read-create | current | The highest source MAC address to compare with in a range. The value should be higher than or equal to portClassifierActionSrcMacAddressLow. This object is rel… |
| 1.3.6.1.4.1.164.6.3.17.3.1.16 | ColumnportClassifierActionOuterEtherType | read-create | current | The value of the EtherType of the outer VLAN to compare with. This object is relevant only when the outerEtherType(2) bit in portClassifierActionCriteria is se… |
| 1.3.6.1.4.1.164.6.3.17.3.1.17 | ColumnportClassifierActionOuterVlanIdLow | read-create | current | The lowest outer VLAN ID to compare with in a range. The value should be lower than or equal to portClassifierActionOuterVlanIdHigh. This object is relevant on… |
| 1.3.6.1.4.1.164.6.3.17.3.1.18 | ColumnportClassifierActionOuterVlanIdHigh | read-create | current | The highest outer VLAN ID to compare with in a range. The value should be higher than or equal to portClassifierActionOuterVlanIdLow. This object is relevant o… |
| 1.3.6.1.4.1.164.6.3.17.3.1.19 | ColumnportClassifierActionOuterPbitLow | read-create | current | The lowest outer P-bit value to compare with in a range. The value should be lower than or equal to portClassifierActionOuterPbitHigh. This object is relevant … |
| 1.3.6.1.4.1.164.6.3.17.3.1.20 | ColumnportClassifierActionOuterPbitHigh | read-create | current | The highest outer P-bit value to compare with in a range. The value should be higher than or equal to portClassifierActionOuterPbitLow. This object is relevant… |
| 1.3.6.1.4.1.164.6.3.17.3.1.21 | ColumnportClassifierActionOuterDei | read-create | current | The value of the DEI of the outer VLAN to compare with. This object is relevant only when the outerDei(5) bit in portClassifierActionCriteria is set. |
| 1.3.6.1.4.1.164.6.3.17.3.1.22 | ColumnportClassifierActionInnerEtherType | read-create | current | The value of the EtherType of the inner VLAN to compare with. This object is relevant only when the innerEtherType(6) bit in portClassifierActionCriteria is se… |
| 1.3.6.1.4.1.164.6.3.17.3.1.23 | ColumnportClassifierActionInnerVlanIdLow | read-create | current | The lowest inner VLAN ID to compare with in a range. The value should be lower than or equal to portClassifierActionInnerVlanIdHigh. This object is relevant on… |
| 1.3.6.1.4.1.164.6.3.17.3.1.24 | ColumnportClassifierActionInnerVlanIdHigh | read-create | current | The highest inner VLAN ID to compare with in a range. The value should be higher than or equal to portClassifierActionInnerVlanIdLow. This object is relevant o… |
| 1.3.6.1.4.1.164.6.3.17.3.1.25 | ColumnportClassifierActionInnerPbitLow | read-create | current | The lowest inner P-bit value to compare with in a range. The value should be lower than or equal to portClassifierActionInnerPbitHigh. This object is relevant … |
| 1.3.6.1.4.1.164.6.3.17.3.1.26 | ColumnportClassifierActionInnerPbitHigh | read-create | current | The highest inner P-bit value to compare with in a range. The value should be higher than or equal to portClassifierActionInnerPbitLow. This object is relevant… |
| 1.3.6.1.4.1.164.6.3.17.3.1.27 | ColumnportClassifierActionTosLow | read-create | current | The lowest IP TOS/DSCP/Precedence value to compare with in a range. The value should be lower than or equal to portClassifierActionTosHigh. This object is rele… |
| 1.3.6.1.4.1.164.6.3.17.3.1.28 | ColumnportClassifierActionTosHigh | read-create | current | The highest IP TOS/DSCP/Precedence value to compare with in a range. The value should be higher than or equal to portClassifierActionTosLow. This object is rel… |
| 1.3.6.1.4.1.164.6.3.17.3.1.29 | ColumnportClassifierActionProtocol | read-create | current | The value of the Protocol field of the IPv4 header or the Next Header field of IPv6 header to compare with. This object is relevant only when the protocol(12) … |
| 1.3.6.1.4.1.164.6.3.17.3.1.30 | ColumnportClassifierActionSrcIPAddressType | read-create | current | The type of the source IP address of portClassifierActionSrcIPAddress. This object is relevant only when the srcIPAddress(13) bit in portClassifierActionCriter… |
| 1.3.6.1.4.1.164.6.3.17.3.1.31 | ColumnportClassifierActionSrcIPAddress | read-create | current | The IP address to match against the packet's source IP address. The type of this address is determined by the value of portClassifierActionSrcIPAddressType. Th… |
| 1.3.6.1.4.1.164.6.3.17.3.1.32 | ColumnportClassifierActionSrcIPAddressPrefixLength | read-create | current | The length of the CIDR Prefix carried in portClassifierActionSrcIPAddress. This object is relevant only when the srcIPAddress(13) bit in portClassifierActionCr… |
| 1.3.6.1.4.1.164.6.3.17.3.1.33 | ColumnportClassifierActionDstIPAddressType | read-create | current | The type of the destination IP address of portClassifierActionDstIPAddress. This object is relevant only when the dstIPAddress(14) bit in portClassifierActionC… |
| 1.3.6.1.4.1.164.6.3.17.3.1.34 | ColumnportClassifierActionDstIPAddress | read-create | current | The IP address to match against the packet's destination IP address. The type of this address is determined by the value of portClassifierActionDstIPAddressTyp… |
| 1.3.6.1.4.1.164.6.3.17.3.1.35 | ColumnportClassifierActionDstIPAddressPrefixLength | read-create | current | The length of the CIDR Prefix carried in portClassifierActionDstIPAddress. This object is relevant only when the dstIPAddress(14) bit in portClassifierActionCr… |
| 1.3.6.1.4.1.164.6.3.17.3.1.36 | ColumnportClassifierActionTcpSrcPortLow | read-create | current | The lowest TCP source port number to compare with in a range. The value should be lower than or equal to portClassifierActionTcpSrcPortHigh. This object is rel… |
| 1.3.6.1.4.1.164.6.3.17.3.1.37 | ColumnportClassifierActionTcpSrcPortHigh | read-create | current | The highest TCP source port number to compare with in a range. The value should be higher than or equal to portClassifierActionTcpSrcPortLow. This object is re… |
| 1.3.6.1.4.1.164.6.3.17.3.1.38 | ColumnportClassifierActionTcpDstPortLow | read-create | current | The lowest TCP destination port number to compare with in a range. The value should be lower than or equal to portClassifierActionTcpDstPortHigh. This object i… |
| 1.3.6.1.4.1.164.6.3.17.3.1.39 | ColumnportClassifierActionTcpDstPortHigh | read-create | current | The highest TCP destination port number to compare with in a range. The value should be higher than or equal to portClassifierActionTcpDstPortLow. This object … |
| 1.3.6.1.4.1.164.6.3.17.3.1.40 | ColumnportClassifierActionUdpSrcPortLow | read-create | current | The lowest UDP source port number to compare with in a range. The value should be lower than or equal to portClassifierActionUdpSrcPortHigh. This object is rel… |
| 1.3.6.1.4.1.164.6.3.17.3.1.41 | ColumnportClassifierActionUdpSrcPortHigh | read-create | current | The highest UDP source port number to compare with in a range. The value should be higher than or equal to portClassifierActionUdpSrcPortLow. This object is re… |
| 1.3.6.1.4.1.164.6.3.17.3.1.42 | ColumnportClassifierActionUdpDstPortLow | read-create | current | The lowest UDP destination port number to compare with in a range. The value should be lower than or equal to portClassifierActionUdpDstPortHigh. This object i… |
| 1.3.6.1.4.1.164.6.3.17.3.1.43 | ColumnportClassifierActionUdpDstPortHigh | read-create | current | The highest UDP destination port number to compare with in a range. The value should be higher than or equal to portClassifierActionUdpDstPortLow. This object … |
| 1.3.6.1.4.1.164.6.3.17.4 | TableportClassifierCommentTable | not-accessible | current | This table contains a list of port classifier comments (ACL coments). |
| 1.3.6.1.4.1.164.6.3.17.4.1 | RowportClassifierCommentEntry | not-accessible | current | An entry in the port classifier comments table. When a row is created/deleted , a corresponding row (where portClassifierInvSequenceNumber equals portClassifie… |
| 1.3.6.1.4.1.164.6.3.17.4.1.1 | ColumnportClassifierCommentIndex | not-accessible | current | A running number for the port classifier comments. |
| 1.3.6.1.4.1.164.6.3.17.4.1.2 | ColumnportClassifierCommentRowStatus | read-create | current | This object enables creation and deletion of port classifiers comments. |
| 1.3.6.1.4.1.164.6.3.17.4.1.3 | ColumnportClassifierCommentSequenceNumber | read-create | current | The sequence number (priority) of the comment. It must be unique across all rows of this table and of portClassifierActionTable. The default value is portClass… |
| 1.3.6.1.4.1.164.6.3.17.4.1.4 | ColumnportClassifierCommentDescr | read-create | current | Free text describing the following rules. |
| 1.3.6.1.4.1.164.6.3.17.5 | TableportClassifierInvTable | not-accessible | current | This read-only table contains a list of port classifier actions and comments. The list is sorted by sequence number. |
| 1.3.6.1.4.1.164.6.3.17.5.1 | RowportClassifierInvEntry | not-accessible | current | An entry in port classifier inverse table. A row is autonatically created/deleted when a row is activated/deleted at the portClassifierActionTable or at the po… |
| 1.3.6.1.4.1.164.6.3.17.5.1.1 | ColumnportClassifierInvSequenceNumber | not-accessible | current | The sequence number (priority) of the rule or comment. |
| 1.3.6.1.4.1.164.6.3.17.5.1.2 | ColumnportClassifierInvType | read-only | current | Indicates the origin table of the entry: action(1) - portClassifierActionTable comment(2) - portClassifierCommentTable . |
| 1.3.6.1.4.1.164.6.3.17.5.1.3 | ColumnportClassifierInvPointer | read-only | current | The running index at the origin table per portClassifierInvType. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dscp | Integer32 (0..63) | current | A Differentiated Services Code-Point that may be used for marking a traffic stream. |
| ProfileMethod | INTEGER { ieee802dot1p (2), tos (3), dscp (4), ipPrecedence (5), userPorts (6), internalCos (7), dei (8) } | current | This textual convention defines list of classification methods that may be used for priority handling mapping profiles. |