RADLAN-MIB
650 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBasePort dot1dBasePortEntry MacAddress Timeout |
| IEEE8021-PAE-MIB | dot1xAuthSessionStatsEntry dot1xPaePortNumber PaeControlledPortStatus |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | dot1qFdbId PortList VlanIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | -- TRAP-TYPE -- |
| RFC1155-SMI | 1x supplicant traps -- 09-Oct-2007 Added rldot1dStpPortLoopback in rldot1dStpPortEntry -- 09-Oct-2007 Added loopback traps IMPORTS IpAddress Counter enterprises TimeTicks |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Counter64 Unsigned32 |
| SNMPv2-SMI-v1 | Counter-32 Integer-32 Unsigned-32 |
| SNMPv2-TC-v1 | DateAndTime DisplayString PhysAddress RowPointer RowStatus TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89 | Nodernd | |||
| 1.3.6.1.4.1.89.0 | IdentityrndNotifications | current | All the rnd notifications will reside under this branch as specified in RFC2578 'Structure of Management Information Version 2 (SMIv2)' 8.5 | |
| 1.3.6.1.4.1.89.1 | NoderndMng | |||
| 1.3.6.1.4.1.89.2 | NoderndDeviceParams | |||
| 1.3.6.1.4.1.89.2.1 | ScalarrndBridgeType | read-only | mandatory | Identification of the RND bridge type. |
| 1.3.6.1.4.1.89.2.2 | ScalarrndInactiveArpTimeOut | read-write | mandatory | This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is del… |
| 1.3.6.1.4.1.89.2.3 | NoderndBridgeAlarm | |||
| 1.3.6.1.4.1.89.2.3.1 | ScalarrndErrorDesc | read-only | mandatory | A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device. |
| 1.3.6.1.4.1.89.2.3.2 | ScalarrndErrorSeverity | read-only | mandatory | The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device. |
| 1.3.6.1.4.1.89.2.4 | ScalarrndBrgVersion | read-only | mandatory | The bridge version. |
| 1.3.6.1.4.1.89.2.5 | ScalarrndBrgFeatures | read-only | mandatory | A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte … |
| 1.3.6.1.4.1.89.2.6 | ScalarrndBrgLicense | read-write | mandatory | This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device. |
| 1.3.6.1.4.1.89.2.7 | NoderndIpHost | |||
| 1.3.6.1.4.1.89.2.7.2 | TablerndCommunityTable | not-accessible | mandatory | The community table of the agent |
| 1.3.6.1.4.1.89.2.7.2.1 | RowrndCommunityEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.2.7.2.1.1 | ColumnrndCommunityMngStationAddr | read-write | mandatory | The management station that will be allowed to communicate with the agent IP address |
| 1.3.6.1.4.1.89.2.7.2.1.2 | ColumnrndCommunityString | read-write | mandatory | The community string with which the management station will communicate with the agent |
| 1.3.6.1.4.1.89.2.7.2.1.3 | ColumnrndCommunityAccess | read-write | mandatory | The allowed access to this management station |
| 1.3.6.1.4.1.89.2.7.2.1.4 | ColumnrndCommunityTrapsEnable | read-write | mandatory | Should the agent send traps to the management station, and what version is required |
| 1.3.6.1.4.1.89.2.7.2.1.5 | ColumnrndCommunityStatus | read-write | mandatory | The status of this entry. If the status is invalid the community entry will be deleted |
| 1.3.6.1.4.1.89.2.7.2.1.6 | ColumnrndCommunityPortSecurity | read-write | mandatory | If enabled the device will only receive SNMP messages from the port, through which this NMS is reachable from the device. |
| 1.3.6.1.4.1.89.2.7.2.1.7 | ColumnrndCommunityOwner | read-write | mandatory | The owner of this community |
| 1.3.6.1.4.1.89.2.7.2.1.8 | ColumnrndCommunityTrapDestPort | read-write | mandatory | The transport protocol (usually UDP) port to which traps to the management station represebted by this entry will be sent. The default is the well-known IANA a… |
| 1.3.6.1.4.1.89.2.7.3 | TablerlMridTable | not-accessible | mandatory | The MRID related configurations table of the agent |
| 1.3.6.1.4.1.89.2.7.3.1 | RowrlMridEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.2.7.3.1.1 | ColumnrlMridConnection | read-write | mandatory | The router instance connecting the NMS who accessed the agent through the community table entry corresponding to the keys of this entry. |
| 1.3.6.1.4.1.89.2.7.3.1.2 | ColumnrlManagedMrid | read-write | mandatory | The router instance currently managed by the NMS who accessed the agent through the community table entry corresponding to the keys of this entry |
| 1.3.6.1.4.1.89.2.7.4 | NoderndIpHostManagement | |||
| 1.3.6.1.4.1.89.2.7.4.1 | ScalarrndIpHostManagementSupported | read-only | mandatory | ifindex manage supported. |
| 1.3.6.1.4.1.89.2.7.4.2 | ScalarrndIpHostManagementIfIndex | read-write | mandatory | if supported manage , indicate ifindex, if 0 thaen disable |
| 1.3.6.1.4.1.89.2.8 | ScalarrndManagedTime | read-write | mandatory | The time will be sent in the format hhmmss |
| 1.3.6.1.4.1.89.2.9 | ScalarrndManagedDate | read-write | mandatory | The date will be sent in the format ddmmyy |
| 1.3.6.1.4.1.89.2.10 | ScalarrndBaseBootVersion | read-only | mandatory | Defines the boot version of the product. |
| 1.3.6.1.4.1.89.2.11 | NodegenGroup | |||
| 1.3.6.1.4.1.89.2.11.1 | ScalargenGroupHWVersion | read-only | mandatory | Defines the HW version of the product. |
| 1.3.6.1.4.1.89.2.11.2 | ScalargenGroupConfigurationSymbol | read-only | mandatory | Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version. |
| 1.3.6.1.4.1.89.2.11.3 | ScalargenGroupHWStatus | read-only | mandatory | This attribute describes the status of the group hardware as detected by the sensors software. |
| 1.3.6.1.4.1.89.2.12 | ScalarrndBasePhysicalAddress | read-only | mandatory | The Base physical (MAC) address of the device. |
| 1.3.6.1.4.1.89.2.13 | NoderndSoftwareFile | |||
| 1.3.6.1.4.1.89.2.13.1 | TablerndActiveSoftwareFileTable | not-accessible | mandatory | The (conceptual) table listing the active software file of the requested unit. |
| 1.3.6.1.4.1.89.2.13.1.1 | RowrndActiveSoftwareFileEntry | not-accessible | mandatory | An entry (conceptual row) in the rndActiveSoftwareFileTable. |
| 1.3.6.1.4.1.89.2.13.1.1.1 | ColumnrndUnitNumber | read-write | mandatory | The unit number (for stackable devices) or 1 for 'stand alone' device. |
| 1.3.6.1.4.1.89.2.13.1.1.2 | ColumnrndActiveSoftwareFile | read-only | mandatory | Indicates the current active software file, image1 or image2. |
| 1.3.6.1.4.1.89.2.13.1.1.3 | ColumnrndActiveSoftwareFileAfterReset | read-write | mandatory | Indicates the software file that will be active after reset (image1 or image2). If an error occurred in the download process, resulting in the corruption of th… |
| 1.3.6.1.4.1.89.2.14 | ScalarrndImageSize | read-only | mandatory | Max number of sectors currently allocated for image(s). |
| 1.3.6.1.4.1.89.2.15 | ScalarrndBackupConfigurationEnabled | read-only | mandatory | Specifies whether the device supports backup-config parameters in lcli commands. |
| 1.3.6.1.4.1.89.2.16 | NoderndImageInfo | |||
| 1.3.6.1.4.1.89.2.16.1 | TablerndImageInfoTable | not-accessible | mandatory | The table contains information about images. |
| 1.3.6.1.4.1.89.2.16.1.1 | RowrndImageInfoEntry | not-accessible | mandatory | An entry in the rndImageInfoTable. |
| 1.3.6.1.4.1.89.2.16.1.1.1 | ColumnrndStackUnitNumber | read-write | mandatory | The unit number (for stackable devices) or 1 for 'stand alone' device. |
| 1.3.6.1.4.1.89.2.16.1.1.2 | ColumnrndImage1Name | read-only | mandatory | Indicates the file name of image-1 in the system. |
| 1.3.6.1.4.1.89.2.16.1.1.3 | ColumnrndImage2Name | read-only | mandatory | Indicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' text |
| 1.3.6.1.4.1.89.2.16.1.1.4 | ColumnrndImage1Version | read-only | mandatory | Indicates the version of image-1 in the system. |
| 1.3.6.1.4.1.89.2.16.1.1.5 | ColumnrndImage2Version | read-only | mandatory | Indicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' text |
| 1.3.6.1.4.1.89.2.16.1.1.6 | ColumnrndImage1Date | read-only | mandatory | Indicates the compilation date of image-1 in the system. |
| 1.3.6.1.4.1.89.2.16.1.1.7 | ColumnrndImage2Date | read-only | mandatory | Indicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' text |
| 1.3.6.1.4.1.89.2.16.1.1.8 | ColumnrndImage1Time | read-only | mandatory | Indicates the compilation time of image-1 in the system. |
| 1.3.6.1.4.1.89.2.16.1.1.9 | ColumnrndImage2Time | read-only | mandatory | Indicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' text |
| 1.3.6.1.4.1.89.3 | NoderxOverflowHWFault | An RX buffer overflow has occurred in one of the LAN or link interfaces. The bound variable rndErrorDesc provides the interface number. | ||
| 1.3.6.1.4.1.89.4 | NodetxOverflowHWFault | Interport queue overflow has occurred in one of the LAN or link interfaces. The bound variable rndErrorDesc provides the interface number. | ||
| 1.3.6.1.4.1.89.5 | NoderouteTableOverflow | An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP). | ||
| 1.3.6.1.4.1.89.10 | NoderesetRequired | This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing alg… | ||
| 1.3.6.1.4.1.89.12 | NodeendTftp | This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual … | ||
| 1.3.6.1.4.1.89.13 | NodeabortTftp | This trap indicates that in the device aborted a TFTP session with the management station. Variable rndErrorDesc and rndErrorSeverity provides the actual messa… | ||
| 1.3.6.1.4.1.89.14 | NodestartTftp | Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question | ||
| 1.3.6.1.4.1.89.23 | NodefaultBackUp | Automantic switchover to backup link because of main link fault. | ||
| 1.3.6.1.4.1.89.24 | NodemainLinkUp | Communication returened to main link. | ||
| 1.3.6.1.4.1.89.24 | NoderndBootP | |||
| 1.3.6.1.4.1.89.24.1 | ScalarrndBootPServerAddress | read-write | mandatory | The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0. |
| 1.3.6.1.4.1.89.24.2 | ScalarrndBootPRelaySecThreshold | read-write | mandatory | BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first. |
| 1.3.6.1.4.1.89.26 | NodeipSpec | |||
| 1.3.6.1.4.1.89.29 | NodersTunning | |||
| 1.3.6.1.4.1.89.35 | NoderndApplications | |||
| 1.3.6.1.4.1.89.36 | NodeipxRipTblOverflow | This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity… | ||
| 1.3.6.1.4.1.89.37 | NodeipxSapTblOverflow | This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity… | ||
| 1.3.6.1.4.1.89.42 | NodersUDP | |||
| 1.3.6.1.4.1.89.43 | NodeswInterfaces | |||
| 1.3.6.1.4.1.89.46 | NoderlIPmulticast | |||
| 1.3.6.1.4.1.89.47 | NoderlFFT | |||
| 1.3.6.1.4.1.89.48 | Nodevlan | |||
| 1.3.6.1.4.1.89.49 | NodefacsAccessVoilation | This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface. The bound variable rndErrorDesc, rndError… | ||
| 1.3.6.1.4.1.89.49 | NoderlRmonControl | |||
| 1.3.6.1.4.1.89.50 | NodeautoConfigurationCompleted | This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info ) | ||
| 1.3.6.1.4.1.89.50 | NoderlBrgMacSwitch | |||
| 1.3.6.1.4.1.89.50.1 | ScalarrlBrgMacSwVersion | read-only | mandatory | MIB's version, the current version is 2. |
| 1.3.6.1.4.1.89.50.2 | ScalarrlBrgMacSwMaxTableNumber | read-only | mandatory | Maximum number of MAC Tables supported by the device. |
| 1.3.6.1.4.1.89.50.3 | ScalarrlBrgMacSwDynamicTables | read-only | mandatory | Specifies whether the device supports port dynamic MAC tables. |
| 1.3.6.1.4.1.89.50.5 | ScalarrlBrgMacSwOldEntryDeleteMode | read-only | mandatory | The method used to delete old unused entries refresh_flag: The high level sets a flag when it adds or updates an entry, the Switch clears the flag each time, w… |
| 1.3.6.1.4.1.89.50.6 | ScalarrlBrgMacSwSpanningTree | read-only | mandatory | Specifies whether the device supports port the Spanning Tree Protocol. |
| 1.3.6.1.4.1.89.50.7 | ScalarrlBrgMacSwKeyType | read-only | mandatory | Specified the used MAC Address Table kye format: macOnly: One global MAC Address Table per device (leaky VLANs). tagAndMac: MAC Address Table per each VLAN (st… |
| 1.3.6.1.4.1.89.50.8 | ScalarrlBrgMacSwYellowBoundary | read-write | mandatory | The yellow boundary. |
| 1.3.6.1.4.1.89.50.9 | ScalarrlBrgMacSwRedBoundary | read-write | mandatory | The yellow boundary. |
| 1.3.6.1.4.1.89.50.10 | ScalarrlBrgMacSwTrapEnable | read-write | mandatory | This variable indicates whether to create a SNMP trap if adding dynamic mac failed due to full hash chain. |
| 1.3.6.1.4.1.89.50.11 | ScalarrlBrgMacSwOperTrapCount | read-only | mandatory | This variable indicates the trap counter status (i.e. number of received MAC addresses since the last trap sent that haven't been inserted into the hash). It i… |
| 1.3.6.1.4.1.89.50.12 | ScalarrlBrgMacSwAdminTrapFrequency | read-write | mandatory | This variable indicates the minimal frequency (in seconds) of sending a trap. It is relevant only when trap is enabled. |
| 1.3.6.1.4.1.89.51 | NodeforwardingTabOverflow | This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning ) | ||
| 1.3.6.1.4.1.89.51 | NoderlExperience | |||
| 1.3.6.1.4.1.89.52 | NoderlCli | |||
| 1.3.6.1.4.1.89.52.1 | ScalarrlCliMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.52.2 | ScalarrlCliPassword | read-write | mandatory | CLI Password |
| 1.3.6.1.4.1.89.52.3 | ScalarrlCliTimer | read-write | mandatory | CLI Timer |
| 1.3.6.1.4.1.89.52.4 | ScalarrlCliFileEnable | read-only | mandatory | CLI File Enable/Disable |
| 1.3.6.1.4.1.89.52.5 | ScalarrlCliFileEnableAfterReset | read-write | mandatory | CLI File Enable/Disable After Reset |
| 1.3.6.1.4.1.89.53 | NodeframRelaySwitchConnectionUp | This trap indicates that a connection establish between the Frame relay Switch and the WanGate. The bound variable rndErrorDesc, rndErrorSeverity(== warning ) | ||
| 1.3.6.1.4.1.89.53 | NoderlPhysicalDescription | |||
| 1.3.6.1.4.1.89.54 | NodeframRelaySwitchConnectionDown | This trap indicates that a connection between the Frame Relay Switch and the WanGate failed. The bound variable rndErrorDesc, rndErrorSeverity(== warning ) | ||
| 1.3.6.1.4.1.89.54 | NoderlIfInterfaces | |||
| 1.3.6.1.4.1.89.55 | NoderlMacMulticast | |||
| 1.3.6.1.4.1.89.56 | NoderlGalileo | |||
| 1.3.6.1.4.1.89.57 | NoderlpBridgeMIBObjects | |||
| 1.3.6.1.4.1.89.57.1 | Noderldot1dPriority | |||
| 1.3.6.1.4.1.89.57.1.1 | Scalarrldot1dPriorityMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.57.1.2 | Tablerldot1dPriorityPortGroupTable | not-accessible | mandatory | A list of PortGroupNumber for each port. |
| 1.3.6.1.4.1.89.57.1.2.1 | Rowrldot1dPriorityPortGroupEntry | not-accessible | mandatory | All ports belonging to a same group have the same User Priority to Traffic Class mapping. |
| 1.3.6.1.4.1.89.57.1.2.1.1 | Columnrldot1dPriorityPortGroupNumber | read-only | mandatory | A group, that port belongs to. All ports belonging to a same group have the same User Priority to Traffic Class mapping. |
| 1.3.6.1.4.1.89.57.2 | Noderldot1dStp | |||
| 1.3.6.1.4.1.89.57.2.1 | Scalarrldot1dStpMibVersion | read-only | mandatory | MIB's version, the current version is 2. |
| 1.3.6.1.4.1.89.57.2.2 | Scalarrldot1dStpType | read-only | mandatory | Specifies whether the device supports Spanning Tree per device, or per group. |
| 1.3.6.1.4.1.89.57.2.3 | Scalarrldot1dStpEnable | read-write | mandatory | Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans. |
| 1.3.6.1.4.1.89.57.2.4 | Scalarrldot1dStpPortMustBelongToVlan | read-write | mandatory | Specifies whether a port must belong to a VLAN in order to participate in the STP. |
| 1.3.6.1.4.1.89.57.2.5 | Scalarrldot1dStpExtendedPortNumberFormat | read-write | mandatory | Specifies whether the STP uses the extended port fnumber format. |
| 1.3.6.1.4.1.89.57.2.6 | Tablerldot1dStpVlanTable | not-accessible | mandatory | A table that contains vlan-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.89.57.2.6.1 | Rowrldot1dStpVlanEntry | not-accessible | mandatory | A list of information maintained by every Vlan about the Spanning Tree Protocol state for that Vlan. |
| 1.3.6.1.4.1.89.57.2.6.1.1 | Columnrldot1dStpVlan | read-only | mandatory | The Vlan index. |
| 1.3.6.1.4.1.89.57.2.6.1.2 | Columnrldot1dStpVlanEnable | read-write | mandatory | Specifies whether this vlan is STP enable or disable |
| 1.3.6.1.4.1.89.57.2.6.1.3 | Columnrldot1dStpTimeSinceTopologyChange | read-only | mandatory | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.89.57.2.6.1.4 | Columnrldot1dStpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.89.57.2.6.1.5 | Columnrldot1dStpDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.89.57.2.6.1.6 | Columnrldot1dStpRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.89.57.2.6.1.7 | Columnrldot1dStpRootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.89.57.2.6.1.8 | Columnrldot1dStpMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.89.57.2.6.1.9 | Columnrldot1dStpHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.89.57.2.6.1.10 | Columnrldot1dStpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.89.57.2.6.1.11 | Columnrldot1dStpForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.89.57.2.7 | Tablerldot1dStpVlanPortTable | not-accessible | mandatory | A table that contains pair <vlan, port> specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.89.57.2.7.1 | Rowrldot1dStpVlanPortEntry | not-accessible | mandatory | A list of information maintained by every pair <vlan, port> about the Spanning Tree Protocol state for that pair. |
| 1.3.6.1.4.1.89.57.2.7.1.1 | Columnrldot1dStpVlanPortVlan | read-only | mandatory | The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.89.57.2.7.1.2 | Columnrldot1dStpVlanPortPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.89.57.2.7.1.3 | Columnrldot1dStpVlanPortPriority | read-write | mandatory | The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The other octet … |
| 1.3.6.1.4.1.89.57.2.7.1.4 | Columnrldot1dStpVlanPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.89.57.2.7.1.5 | Columnrldot1dStpVlanPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.89.57.2.7.1.6 | Columnrldot1dStpVlanPortPathCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.89.57.2.7.1.7 | Columnrldot1dStpVlanPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.89.57.2.7.1.8 | Columnrldot1dStpVlanPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.89.57.2.7.1.9 | Columnrldot1dStpVlanPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.89.57.2.7.1.10 | Columnrldot1dStpVlanPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.89.57.2.7.1.11 | Columnrldot1dStpVlanPortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.89.57.2.8 | Noderldot1dStpTrapVariable | |||
| 1.3.6.1.4.1.89.57.2.8.1 | Scalarrldot1dStpTrapVrblifIndex | read-only | mandatory | The ifIndex of port which STP status was changed |
| 1.3.6.1.4.1.89.57.2.8.2 | Scalarrldot1dStpTrapVrblVID | read-only | mandatory | The VID of VLAN to which the port belongs which STP status was changed |
| 1.3.6.1.4.1.89.57.2.9 | Scalarrldot1dStpTypeAfterReset | read-write | mandatory | New mode of spaning tree supported by the device after the next reset. |
| 1.3.6.1.4.1.89.57.2.10 | Scalarrldot1dStpMonitorTime | read-write | mandatory | Factor of hello-time during which a port is monotored to determine if it is stable. |
| 1.3.6.1.4.1.89.57.2.11 | Scalarrldot1dStpBpduCount | read-write | mandatory | The number of bpdu that need to received for the link to be considered stable. |
| 1.3.6.1.4.1.89.57.2.12 | Scalarrldot1dStpLastChanged | read-only | mandatory | The last time any object in this table was changed by SNMP or other local management means. |
| 1.3.6.1.4.1.89.57.2.13 | Tablerldot1dStpPortTable | not-accessible | mandatory | A table that contains extended pair port specific information. |
| 1.3.6.1.4.1.89.57.2.13.1 | Rowrldot1dStpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.89.57.2.13.1.1 | Columnrldot1dStpPortPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.89.57.2.13.1.2 | Columnrldot1dStpPortDampEnable | read-write | mandatory | Specified if dampening is enabled on this port. |
| 1.3.6.1.4.1.89.57.2.13.1.3 | Columnrldot1dStpPortDampStable | read-only | mandatory | Specified if the port is stable. |
| 1.3.6.1.4.1.89.57.2.13.1.4 | Columnrldot1dStpPortFilterBpdu | read-write | mandatory | Specified if this port should filter bpdus when stp is disabled. |
| 1.3.6.1.4.1.89.57.2.13.1.5 | Columnrldot1dStpPortBpduSent | read-only | mandatory | Specified the number of bpdu sent from this port. |
| 1.3.6.1.4.1.89.57.2.13.1.6 | Columnrldot1dStpPortBpduReceived | read-only | mandatory | Specified the number of bpdu received in this port. |
| 1.3.6.1.4.1.89.57.2.13.1.7 | Columnrldot1dStpPortRole | read-only | mandatory | Specified the role of this this port. |
| 1.3.6.1.4.1.89.57.2.13.1.8 | Columnrldot1dStpBpduType | read-only | mandatory | Specified the type of BPDU transmitted by this port. |
| 1.3.6.1.4.1.89.57.2.13.1.9 | Columnrldot1dStpPortRestrictedRole | read-write | mandatory | If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a Port will be se… |
| 1.3.6.1.4.1.89.57.2.13.1.10 | Columnrldot1dStpPortAutoEdgePort | read-write | mandatory | If TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state. |
| 1.3.6.1.4.1.89.57.2.13.1.11 | Columnrldot1dStpPortLoopback | read-only | mandatory | Specified loopback was detected on port. |
| 1.3.6.1.4.1.89.57.2.14 | Scalarrldot1dStpPortsEnable | read-only | mandatory | Enable / Disable spanning tree on ports by default . |
| 1.3.6.1.4.1.89.57.2.15 | Scalarrldot1dStpTaggedFlooding | read-only | mandatory | flooding can be done in tagged bpdu . |
| 1.3.6.1.4.1.89.57.2.16 | Scalarrldot1dStpPortBelongToVlanDefault | read-only | mandatory | The default value of rldot1dStpPortMustBelongToVlan . |
| 1.3.6.1.4.1.89.57.2.17 | Scalarrldot1dStpEnableByDefault | read-only | mandatory | The default value of rldot1dStpEnable . |
| 1.3.6.1.4.1.89.57.2.18 | Scalarrldot1dStpPortToDefault | read-write | mandatory | To order port/s to revert to default setings . |
| 1.3.6.1.4.1.89.57.2.19 | Scalarrldot1dStpSupportedType | read-only | mandatory | The type of stp supported by the device. |
| 1.3.6.1.4.1.89.57.2.20 | Scalarrldot1dStpEdgeportSupportInStp | read-only | mandatory | If EdgePort is supported in stpCompatible mode . |
| 1.3.6.1.4.1.89.57.2.21 | Scalarrldot1dStpFilterBpdu | read-write | mandatory | Specified if the device should filter BPDUs when STP is disabled. |
| 1.3.6.1.4.1.89.57.2.22 | Scalarrldot1dStpFloodBpduMethod | read-write | mandatory | Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging. |
| 1.3.6.1.4.1.89.57.2.23 | Noderldot1dStpSeparatedBridges | |||
| 1.3.6.1.4.1.89.57.2.23.1 | Tablerldot1dStpSeparatedBridgesTable | not-accessible | mandatory | Define if separated bridges feature is enabled for each interface. |
| 1.3.6.1.4.1.89.57.2.23.1.1 | Rowrldot1dStpSeparatedBridgesEntry | not-accessible | mandatory | Defines the contents of each line in the rlSeparatedBridgesTable table. |
| 1.3.6.1.4.1.89.57.2.23.1.1.1 | Columnrldot1dStpSeparatedBridgesPortEnable | read-write | mandatory | This variable indicates whether the separated bridge feature is enabled on a specified ifIndex. |
| 1.3.6.1.4.1.89.57.2.23.2 | Scalarrldot1dStpSeparatedBridgesEnable | read-write | mandatory | Enable / Disable Separated Bridges Feature. |
| 1.3.6.1.4.1.89.57.2.23.3 | Scalarrldot1dStpSeparatedBridgesAutoConfig | read-write | mandatory | Enable / Disable Separated Bridges Automatic Configuration. |
| 1.3.6.1.4.1.89.57.2.24 | Tablerldot1dStpPortBpduGuardTable | not-accessible | mandatory | A table that contains for each port whether it is bpdu guard . |
| 1.3.6.1.4.1.89.57.2.24.1 | Rowrldot1dStpPortBpduGuardEntry | not-accessible | mandatory | A list of information maintained by every port whether it is bpdu guard. |
| 1.3.6.1.4.1.89.57.2.24.1.1 | Columnrldot1dStpPortBpduGuardEnable | read-write | mandatory | Specified if bpdu guard is enabled on this port. |
| 1.3.6.1.4.1.89.57.3 | Noderldot1dExtBase | |||
| 1.3.6.1.4.1.89.57.3.1 | Scalarrldot1dExtBaseMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.57.3.2 | Scalarrldot1dDeviceCapabilities | read-only | mandatory | Indicates the optional parts of private extension of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabiliti… |
| 1.3.6.1.4.1.89.57.4 | Noderldot1wRStp | |||
| 1.3.6.1.4.1.89.57.4.1 | Tablerldot1wRStpVlanEdgePortTable | not-accessible | mandatory | A table that contains pair <vlan, port> specific information for the Rapid Spanning Tree Protocol. |
| 1.3.6.1.4.1.89.57.4.1.1 | Rowrldot1wRStpVlanEdgePortEntry | not-accessible | mandatory | A list of information maintained by every pair <vlan, port> about the RAPID Spanning Tree Protocol state for that pair. |
| 1.3.6.1.4.1.89.57.4.1.1.1 | Columnrldot1wRStpVlanEdgePortVlan | read-only | mandatory | The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one valu… |
| 1.3.6.1.4.1.89.57.4.1.1.2 | Columnrldot1wRStpVlanEdgePortPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.89.57.4.1.1.3 | Columnrldot1wRStpEdgePortStatus | read-write | mandatory | Specifies whether this port is an Edge Port or not |
| 1.3.6.1.4.1.89.57.4.2 | Tablerldot1wRStpForceVersionTable | not-accessible | mandatory | A table that contains <vlan> specific information for the Rapid Spanning Tree Protocol. |
| 1.3.6.1.4.1.89.57.4.2.1 | Rowrldot1wRStpForceVersionEntry | not-accessible | mandatory | A list of information maintained by every <vlan> about the RAPID Spanning Tree Protocol state for that pair. |
| 1.3.6.1.4.1.89.57.4.2.1.1 | Columnrldot1wRStpForceVersionVlan | read-only | mandatory | The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one valu… |
| 1.3.6.1.4.1.89.57.4.2.1.2 | Columnrldot1wRStpForceVersionState | read-write | mandatory | Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP |
| 1.3.6.1.4.1.89.57.5 | Noderldot1pPriorityMap | |||
| 1.3.6.1.4.1.89.57.5.1 | Scalarrldot1pPriorityMapState | read-write | mandatory | enable / disable |
| 1.3.6.1.4.1.89.57.5.2 | Tablerldot1pPriorityMapTable | not-accessible | mandatory | This table hold information the priority maps |
| 1.3.6.1.4.1.89.57.5.2.1 | Rowrldot1pPriorityMapEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.57.5.2.1.1 | Columnrldot1pPriorityMapName | read-only | mandatory | The map name |
| 1.3.6.1.4.1.89.57.5.2.1.2 | Columnrldot1pPriorityMapPriority | read-write | mandatory | The map holding the queue |
| 1.3.6.1.4.1.89.57.5.2.1.3 | Columnrldot1pPriorityMapPort | read-write | mandatory | the port that the map, is applied on in config |
| 1.3.6.1.4.1.89.57.5.2.1.4 | Columnrldot1pPriorityMapPortList | read-only | mandatory | the ports that the map, is applied on in actual |
| 1.3.6.1.4.1.89.57.5.2.1.5 | Columnrldot1pPriorityMapStatus | read-write | mandatory | The status of the table entry. It's used to delete an entry |
| 1.3.6.1.4.1.89.57.6 | Noderldot1sMstp | |||
| 1.3.6.1.4.1.89.57.6.1 | Tablerldot1sMstpInstanceTable | not-accessible | mandatory | A table that contains Mstp instance specific information for the Multiple Spanning Tree Protocol. |
| 1.3.6.1.4.1.89.57.6.1.1 | Rowrldot1sMstpInstanceEntry | not-accessible | mandatory | A list of information maintained by every instance about the multiple Spanning Tree Protocol state for that instance. |
| 1.3.6.1.4.1.89.57.6.1.1.1 | Columnrldot1sMstpInstanceId | read-only | mandatory | The Instance index. |
| 1.3.6.1.4.1.89.57.6.1.1.2 | Columnrldot1sMstpInstanceEnable | read-only | mandatory | Specifies whether this Instance is STP enable or disable |
| 1.3.6.1.4.1.89.57.6.1.1.3 | Columnrldot1sMstpInstanceTimeSinceTopologyChange | read-only | mandatory | The time (in hundredths of a second) since the last time a topology change was detected by the Mstp Instance . |
| 1.3.6.1.4.1.89.57.6.1.1.4 | Columnrldot1sMstpInstanceTopChanges | read-only | mandatory | The total number of topology changes detected by this Instance since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.89.57.6.1.1.5 | Columnrldot1sMstpInstanceDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Muliple Spanning Tree Protocol as executed by this node. This value is used as the … |
| 1.3.6.1.4.1.89.57.6.1.1.6 | Columnrldot1sMstpInstanceRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.89.57.6.1.1.7 | Columnrldot1sMstpInstanceRootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.89.57.6.1.1.8 | Columnrldot1sMstpInstanceMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.89.57.6.1.1.9 | Columnrldot1sMstpInstanceHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.89.57.6.1.1.10 | Columnrldot1sMstpInstanceHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.89.57.6.1.1.11 | Columnrldot1sMstpInstanceForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.89.57.6.1.1.12 | Columnrldot1sMstpInstancePriority | read-write | mandatory | The value of the write-able portion of the Bridge ID, i.e., the first four bits of the first octet of the (8 octet long) Bridge ID.The value is a product of 40… |
| 1.3.6.1.4.1.89.57.6.1.1.13 | Columnrldot1sMstpInstanceRemainingHopes | read-only | mandatory | This count value determines the amount of hopes the information transmited by this bridge on this instance can travel. |
| 1.3.6.1.4.1.89.57.6.2 | Tablerldot1sMstpInstancePortTable | not-accessible | mandatory | A table that contains pair <msti, port> specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.89.57.6.2.1 | Rowrldot1sMstpInstancePortEntry | not-accessible | mandatory | A list of information maintained by every pair <msti, port> about the Spanning Tree Protocol state for that pair. |
| 1.3.6.1.4.1.89.57.6.2.1.1 | Columnrldot1sMstpInstancePortMstiId | read-only | mandatory | The Vlan group number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.89.57.6.2.1.2 | Columnrldot1sMstpInstancePortPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.89.57.6.2.1.3 | Columnrldot1sMstpInstancePortPriority | read-write | mandatory | The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The value is a p… |
| 1.3.6.1.4.1.89.57.6.2.1.4 | Columnrldot1sMstpInstancePortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.89.57.6.2.1.5 | Columnrldot1sMstpInstancePortEnable | read-only | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.89.57.6.2.1.6 | Columnrldot1sMstpInstancePortPathCost | read-only | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.89.57.6.2.1.7 | Columnrldot1sMstpInstancePortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.89.57.6.2.1.8 | Columnrldot1sMstpInstancePortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.89.57.6.2.1.9 | Columnrldot1sMstpInstancePortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.89.57.6.2.1.10 | Columnrldot1sMstpInstancePortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.89.57.6.2.1.11 | Columnrldot1sMstpInstancePortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.89.57.6.2.1.12 | Columnrldot1sMStpInstancePortAdminPathCost | read-write | mandatory | The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns … |
| 1.3.6.1.4.1.89.57.6.2.1.13 | Columnrldot1sMStpInstancePortRole | read-only | mandatory | Specify the role of this this port. |
| 1.3.6.1.4.1.89.57.6.3 | Scalarrldot1sMstpMaxHopes | read-write | mandatory | Max number of hopes that an MST BPDU will travel inside a region. |
| 1.3.6.1.4.1.89.57.6.4 | Scalarrldot1sMstpConfigurationName | read-only | mandatory | The active configuration name as will be caried in MST BPDU's. |
| 1.3.6.1.4.1.89.57.6.5 | Scalarrldot1sMstpRevisionLevel | read-only | mandatory | The active revision level. |
| 1.3.6.1.4.1.89.57.6.6 | Tablerldot1sMstpVlanTable | not-accessible | mandatory | A table that contains information about the alocation of vlans to groups. |
| 1.3.6.1.4.1.89.57.6.6.1 | Rowrldot1sMstpVlanEntry | not-accessible | mandatory | A list of information maintained by every vlan about the group it belongs to. |
| 1.3.6.1.4.1.89.57.6.6.1.1 | Columnrldot1sMstpVlan | read-only | mandatory | The vlan number of the vlan for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.89.57.6.6.1.2 | Columnrldot1sMstpGroup | read-only | mandatory | Specifid the active group number this vlan belonges to. |
| 1.3.6.1.4.1.89.57.6.6.1.3 | Columnrldot1sMstpPendingGroup | read-write | mandatory | Specifid the pending group number this vlan belonges to. |
| 1.3.6.1.4.1.89.57.6.7 | Tablerldot1sMstpExtPortTable | not-accessible | mandatory | A table that contains MSTP information about ports of the CIST. |
| 1.3.6.1.4.1.89.57.6.7.1 | Rowrldot1sMstpExtPortEntry | not-accessible | mandatory | A list of information maintained by every port of the CIST. |
| 1.3.6.1.4.1.89.57.6.7.1.1 | Columnrldot1sMstpExtPortPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.89.57.6.7.1.2 | Columnrldot1sMstpExtPortInternalOperPathCost | read-only | mandatory | The contribution of this port to the path cost of paths towards the spanning tree regional root which include this port. 802.1S-2002 recommends that the defaul… |
| 1.3.6.1.4.1.89.57.6.7.1.3 | Columnrldot1sMstpExtPortDesignatedRegionalRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.89.57.6.7.1.4 | Columnrldot1sMstpExtPortDesignatedRegionalCost | read-only | mandatory | The regional path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.89.57.6.7.1.5 | Columnrldot1sMstpExtPortBoundary | read-only | mandatory | Indication if the port is conented to to a lan segment outside or inside the region. |
| 1.3.6.1.4.1.89.57.6.7.1.6 | Columnrldot1sMstpExtPortInternalAdminPathCost | read-write | mandatory | The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns … |
| 1.3.6.1.4.1.89.57.6.8 | Scalarrldot1sMstpDesignatedMaxHopes | read-only | mandatory | Max number of hopes that an MST BPDU will travel inside a region. |
| 1.3.6.1.4.1.89.57.6.9 | Scalarrldot1sMstpRegionalRoot | read-only | mandatory | CIST Regional Root Identifier (13.16.4). The Bridge Identifier of the current CIST Regional Root. |
| 1.3.6.1.4.1.89.57.6.10 | Scalarrldot1sMstpRegionalRootCost | read-only | mandatory | The CIST path cost from the transmitting Bridge to the CIST Regional Root. |
| 1.3.6.1.4.1.89.57.6.11 | Scalarrldot1sMstpPendingConfigurationName | read-write | mandatory | The pending configuration name. |
| 1.3.6.1.4.1.89.57.6.12 | Scalarrldot1sMstpPendingRevisionLevel | read-write | mandatory | The pending revision level. |
| 1.3.6.1.4.1.89.57.6.13 | Scalarrldot1sMstpPendingAction | read-write | mandatory | The action to be done with the pending configuration. copyPendingActive - to copy the pending mst configuration to the active one. copyActivePending - to copy … |
| 1.3.6.1.4.1.89.57.6.14 | Scalarrldot1sMstpRemainingHops | read-only | mandatory | This count value determines the amount of hops the information transmitted by this bridge can travel. |
| 1.3.6.1.4.1.89.57.7 | Noderldot1dTpAgingTime | |||
| 1.3.6.1.4.1.89.57.7.1 | Scalarrldot1dTpAgingTimeMin | read-only | mandatory | The min timeout period in seconds for aging out dynamically learned forwarding information. |
| 1.3.6.1.4.1.89.57.7.2 | Scalarrldot1dTpAgingTimeMax | read-only | mandatory | The max timeout period in seconds for aging out dynamically learned forwarding information. |
| 1.3.6.1.4.1.89.58 | NoderlTelnet | |||
| 1.3.6.1.4.1.89.58.1 | ScalarrlTelnetMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.58.2 | ScalarrlTelnetPassword | read-write | mandatory | Telnet Password |
| 1.3.6.1.4.1.89.58.3 | ScalarrlTelnetTimeout | read-write | mandatory | The number of minutes after which the TCP connection is closed if no activity is detected from the Client |
| 1.3.6.1.4.1.89.58.4 | TablerlTelnetUsersTable | not-accessible | mandatory | This table hold information about current telnet sessions |
| 1.3.6.1.4.1.89.58.4.1 | RowrlTelnetUsersEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.58.4.1.1 | ColumnrlTelnetSessionId | read-only | mandatory | Telnet Session ID |
| 1.3.6.1.4.1.89.58.4.1.2 | ColumnrlTelnetSessionClientAddress | read-only | mandatory | Telnet Session Client IP address |
| 1.3.6.1.4.1.89.58.4.1.3 | ColumnrlTelnetSessionLoginTime | read-only | mandatory | Telnet Session Login Time string |
| 1.3.6.1.4.1.89.58.4.1.4 | ColumnrlTelnetSessionStatus | read-write | mandatory | Telnet Session status. After status has been set to diconnect the sessions is closed and the matching entry is deleted from the table. |
| 1.3.6.1.4.1.89.58.5 | ScalarrlTelnetLoginBanner | read-write | mandatory | Telnet Login Banner. When telnet connection is established, the banner is the concatanation of this MIB and rlTelnetSecondLoginBanner. |
| 1.3.6.1.4.1.89.58.6 | ScalarrlTelnetSecondLoginBanner | read-write | mandatory | Telnet Login Banner Extension. When telnet connection is established, the banner is the concatanation of rlTelnetLoginBanner and this MIB |
| 1.3.6.1.4.1.89.59 | NoderlPolicy | |||
| 1.3.6.1.4.1.89.60 | NoderlArpSpoofing | |||
| 1.3.6.1.4.1.89.60.1 | ScalarrlArpSpoofingMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.60.2 | TablerlArpSpoofingTable | not-accessible | mandatory | A list of the ifIndexes, IP addresses and corresponding MAC addresses. |
| 1.3.6.1.4.1.89.60.2.1 | RowrlArpSpoofingEntry | not-accessible | mandatory | An entry of this table specifis ifIndex,IP Address and MAC address. |
| 1.3.6.1.4.1.89.60.2.1.1 | ColumnrlArpSpoofingIfIndex | read-write | mandatory | The physical interface for which this entry contains information. |
| 1.3.6.1.4.1.89.60.2.1.2 | ColumnrlArpSpoofingLocalIpAddr | read-write | mandatory | Ip addres for which the device will send ARP reply (ARP spoofing). |
| 1.3.6.1.4.1.89.60.2.1.3 | ColumnrlArpSpoofingMacAddr | read-write | mandatory | MAC addres with which the device will send ARP reply. If the field is ommited or its value 0.0.0.0 the device will send with the interface's MAC address. |
| 1.3.6.1.4.1.89.60.2.1.4 | ColumnrlArpSpoofingRemoteIpAddr | read-write | mandatory | Ip addres for which the device will send periodically ARP requests if its value differs from 0.0.0.0. |
| 1.3.6.1.4.1.89.60.2.1.5 | ColumnrlArpSpoofingOutPhysIfIndex | read-write | mandatory | The physical interface to which the device will send periodically ARP requests if its value differs from 0. If its value is 0 then ARP requests will send to al… |
| 1.3.6.1.4.1.89.60.2.1.6 | ColumnrlArpSpoofingStatus | read-write | mandatory | It is used to insert, update or delete an entry |
| 1.3.6.1.4.1.89.61 | NodeerrorsDuringInit | This trap indicates that the an error occured during initialization The bound variable rndErrorDesc, rndErrorSeverity(== error ) | ||
| 1.3.6.1.4.1.89.61 | NoderlMir | |||
| 1.3.6.1.4.1.89.61.1 | ScalarrlMirMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.61.2 | ScalarrlMirMaxNumOfMRIsAfterReset | read-write | mandatory | The maximun instanses of IP Multi Instance Routers after the following reset. |
| 1.3.6.1.4.1.89.61.3 | ScalarrlMirMaxNumOfMRIs | read-only | mandatory | The maximun instanses of IP Multi Instance Routers. |
| 1.3.6.1.4.1.89.61.4 | ScalarrlMirCurMriNum | read-write | mandatory | The number of the MRI of which MIB variables are treated at the same time by the SNMP agent. |
| 1.3.6.1.4.1.89.61.5 | TablerlMirInterfaceTable | not-accessible | mandatory | A list of the assignment ifinterfaces to IP Router instances. |
| 1.3.6.1.4.1.89.61.5.1 | RowrlMirInterfaceEntry | not-accessible | mandatory | An entry of this table specifies the MRID assignement to a L2 interfrace. |
| 1.3.6.1.4.1.89.61.5.1.1 | ColumnrlMirInterfaceIfIndex | read-write | mandatory | The L2 interface for which this entry contains information. |
| 1.3.6.1.4.1.89.61.5.1.2 | ColumnrlMirInterfaceMrid | read-write | mandatory | Multi IP Router Instance Identifier to which the interface is assgned. |
| 1.3.6.1.4.1.89.61.6 | TablerlMirVlanBaseReservedPortsTable | not-accessible | mandatory | A list VLAN based reserved physical ports. |
| 1.3.6.1.4.1.89.61.6.1 | RowrlMirVlanBaseReservedPortsEntry | not-accessible | mandatory | A VLAN based reserved physical port. |
| 1.3.6.1.4.1.89.61.6.1.1 | ColumnrlMirVlanBaseReservedPortsIfIndex | read-write | mandatory | IfIndex of VLAN based reserved physical port. |
| 1.3.6.1.4.1.89.61.6.1.2 | ColumnrlMirVlanBaseReservedPortsStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.61.7 | TablerlMirVlanBaseLogicalPortsTable | not-accessible | mandatory | A list VLAN based logical ports. |
| 1.3.6.1.4.1.89.61.7.1 | RowrlMirVlanBaseLogicalPortsEntry | not-accessible | mandatory | A VLAN based logical point-to-point port. |
| 1.3.6.1.4.1.89.61.7.1.1 | ColumnrlMirVlanBaseLogicalPortsIfIndex | read-write | mandatory | IfIndex of VLAN based Logical point-to-point port. |
| 1.3.6.1.4.1.89.61.7.1.2 | ColumnrlMirVlanBaseLogicalPortsReservedIfIndex | read-write | mandatory | IfIndex of VLAN based reserved physical port on which the logical port is defined. |
| 1.3.6.1.4.1.89.61.7.1.3 | ColumnrlMirVlanBaseLogicalPortsVlanTag | read-write | mandatory | VLAN tag. |
| 1.3.6.1.4.1.89.61.7.1.4 | ColumnrlMirVlanBaseLogicalPortsStatus | read-write | mandatory | It is used to add, update and delete an entry |
| 1.3.6.1.4.1.89.62 | NoderlIpMRouteStdMIB | |||
| 1.3.6.1.4.1.89.63 | Noderl3sw2swTables | |||
| 1.3.6.1.4.1.89.63.1 | Scalarrl3sw2swTablesPollingInterval | read-write | mandatory | The polling interval for dynamic 3SW/2SW tables in seconds. |
| 1.3.6.1.4.1.89.64 | NoderlGvrp | |||
| 1.3.6.1.4.1.89.64.1 | TablerlPortGvrpTimersTable | not-accessible | mandatory | A table of GVRP timer values for every bridge port. This is indexed by dot1dBasePort. |
| 1.3.6.1.4.1.89.64.1.1 | RowrlPortGvrpTimersEntry | not-accessible | mandatory | GVRP timer values for a bridge port. |
| 1.3.6.1.4.1.89.64.1.1.1 | ColumnrlPortGvrpJoinTime | read-write | mandatory | The GVRP Join time, in centiseconds. |
| 1.3.6.1.4.1.89.64.1.1.2 | ColumnrlPortGvrpLeaveTime | read-write | mandatory | The GVRP Leave time, in centiseconds. |
| 1.3.6.1.4.1.89.64.1.1.3 | ColumnrlPortGvrpLeaveAllTime | read-write | mandatory | The GVRP LeaveAll time, in centiseconds. |
| 1.3.6.1.4.1.89.64.1.1.4 | ColumnrlPortGvrpOverrideGarp | read-write | mandatory | If enabled{1}, GVRP timer values for this port are determined by the values in this entry. Otherwise, they are determined by the values in dot1dPortGarpTable. |
| 1.3.6.1.4.1.89.64.2 | ScalarrlGvrpSupported | read-only | mandatory | Is GVRP supported in this device or not |
| 1.3.6.1.4.1.89.64.3 | ScalarrlGvrpMibVersion | read-only | mandatory | MIB's version, the current version is 3. |
| 1.3.6.1.4.1.89.64.4 | TablerlPortGvrpStatisticsTable | not-accessible | mandatory | A table of GVRP statistics values for every bridge port. This is indexed by dot1dBasePort. |
| 1.3.6.1.4.1.89.64.4.1 | RowrlPortGvrpStatisticsEntry | not-accessible | mandatory | GVRP statistics values for a bridge port. |
| 1.3.6.1.4.1.89.64.4.1.1 | ColumnrlPortGvrpStatisticsRJE | read-only | mandatory | The number of Join Empty Received on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.2 | ColumnrlPortGvrpStatisticsRJIn | read-only | mandatory | The number of Join In Received on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.3 | ColumnrlPortGvrpStatisticsREmp | read-only | mandatory | The number of Empty Received on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.4 | ColumnrlPortGvrpStatisticsRLIn | read-only | mandatory | The number of Leave In Received on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.5 | ColumnrlPortGvrpStatisticsRLE | read-only | mandatory | The number of Leave Empty Received on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.6 | ColumnrlPortGvrpStatisticsRLA | read-only | mandatory | The number of Leave All Received on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.7 | ColumnrlPortGvrpStatisticsSJE | read-only | mandatory | The number of Join Empty Sent on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.8 | ColumnrlPortGvrpStatisticsSJIn | read-only | mandatory | The number of Join In Sent on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.9 | ColumnrlPortGvrpStatisticsSEmp | read-only | mandatory | The number of Empty Sent on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.10 | ColumnrlPortGvrpStatisticsSLIn | read-only | mandatory | The number of Leave In Sent on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.11 | ColumnrlPortGvrpStatisticsSLE | read-only | mandatory | The number of Leave Empty Sent on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.12 | ColumnrlPortGvrpStatisticsSLA | read-only | mandatory | The number of Leave All Sent on the port, since the last clearance. |
| 1.3.6.1.4.1.89.64.4.1.13 | ColumnrlPortGvrpStatisticsClear | read-write | mandatory | activate - the signal/trigger to clear ALL the rlPortGvrpStatisticsEntry's fields. passive - specify that the rlPortGvrpStatisticsClear field is not activate, … |
| 1.3.6.1.4.1.89.64.5 | TablerlPortGvrpErrorStatisticsTable | not-accessible | mandatory | A table of GVRP ErrorStatistics values for every bridge port. This is indexed by dot1dBasePort. |
| 1.3.6.1.4.1.89.64.5.1 | RowrlPortGvrpErrorStatisticsEntry | not-accessible | mandatory | GVRP ErrorStatistics values for a bridge port. |
| 1.3.6.1.4.1.89.64.5.1.1 | ColumnrlPortGvrpErrorStatisticsInvProt | read-only | mandatory | The number of Invalid Protocol Id encountered by the GVRP port. (since the last clearance) |
| 1.3.6.1.4.1.89.64.5.1.2 | ColumnrlPortGvrpErrorStatisticsInvAtyp | read-only | mandatory | The number of Invalid Attribute Type encountered by the GVRP port. (since the last clearance) |
| 1.3.6.1.4.1.89.64.5.1.3 | ColumnrlPortGvrpErrorStatisticsInvAval | read-only | mandatory | The number of Invalid Attribute Value encountered by the GVRP port. (since the last clearance) |
| 1.3.6.1.4.1.89.64.5.1.4 | ColumnrlPortGvrpErrorStatisticsInvPlen | read-only | mandatory | The number of Invalid PDU Length encountered by the GVRP port. (since the last clearance) |
| 1.3.6.1.4.1.89.64.5.1.5 | ColumnrlPortGvrpErrorStatisticsInvAlen | read-only | mandatory | The number of Invalid Attribute Length encountered by the GVRP port. (since the last clearance) |
| 1.3.6.1.4.1.89.64.5.1.6 | ColumnrlPortGvrpErrorStatisticsInvEvent | read-only | mandatory | The number of Invalid Event encountered by the GVRP port. (since the last clearance) |
| 1.3.6.1.4.1.89.64.5.1.7 | ColumnrlPortGvrpErrorStatisticsClear | read-write | mandatory | activate - the signal/trigger to clear ALL the rlPortGvrpErrorStatisticsEntry's fields. passive - specify that the rlPortGvrpErrorStatisticsClear field is not … |
| 1.3.6.1.4.1.89.64.6 | TablerlPortGvrpApplicantStatusTable | not-accessible | mandatory | A table of GVRP Applicant Status values for every bridge port. This is indexed by dot1dBasePort. |
| 1.3.6.1.4.1.89.64.6.1 | RowrlPortGvrpApplicantStatusEntry | not-accessible | mandatory | GVRP Applicant Status value for a bridge port. |
| 1.3.6.1.4.1.89.64.6.1.1 | ColumnrlPortGvrpApplicantStatusValue | read-write | mandatory | participant - the Gvrp enabled port sending GARP PDUs. nonParticipant - preventing the Gvrp enabled port from sending GARP PDUs. |
| 1.3.6.1.4.1.89.64.8 | TablerlPortGvrpRegistrationModeTable | not-accessible | mandatory | A table of GVRP Registration Mode values for every bridge port. This is indexed by dot1dBasePort. |
| 1.3.6.1.4.1.89.64.8.1 | RowrlPortGvrpRegistrationModeEntry | not-accessible | mandatory | GVRP Registration Mode value for a bridge port. |
| 1.3.6.1.4.1.89.64.8.1.1 | ColumnrlPortGvrpRegistrationModeForbidden | read-write | mandatory | true - deregisters all VLANS on the specified port and prevents any VLAN creation or registration on that port. false - the registration operation on this port… |
| 1.3.6.1.4.1.89.65 | NoderlDot3adAgg | |||
| 1.3.6.1.4.1.89.66 | NoderlEmbWeb | |||
| 1.3.6.1.4.1.89.66 | NodevlanDynPortAdded | |||
| 1.3.6.1.4.1.89.67 | NoderlSwPackageVersion | |||
| 1.3.6.1.4.1.89.67 | NodevlanDynPortRemoved | |||
| 1.3.6.1.4.1.89.67.1 | TablerlSwPackageVersionTable | not-accessible | mandatory | The table listing the current versions of packages that are included in the running software. |
| 1.3.6.1.4.1.89.67.1.1 | RowrlSwPackageVersionEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.67.1.1.1 | ColumnrlSwPackageVersionName | read-only | mandatory | The Package name. |
| 1.3.6.1.4.1.89.67.1.1.2 | ColumnrlSwPackageVersionVesrion | read-only | mandatory | The Package version. |
| 1.3.6.1.4.1.89.68 | NoderlBroadcom | |||
| 1.3.6.1.4.1.89.68 | NodersSDclientsTableOverflow | This warning is generated when an overflow occurs in the clients table. | ||
| 1.3.6.1.4.1.89.69 | NoderlMultiSessionTerminal | |||
| 1.3.6.1.4.1.89.69 | NodersSDinactiveServer | This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive. | ||
| 1.3.6.1.4.1.89.69.1 | ScalarrlTerminalDebugModePassword | read-write | mandatory | When a user wants to change the terminal mode from debug mode to ASCII he must enter this password first |
| 1.3.6.1.4.1.89.70 | NoderlRCli | |||
| 1.3.6.1.4.1.89.70 | NodersIpZhrConnectionsTableOverflow | The Zero Hop Routing connections Table has been overflown. | ||
| 1.3.6.1.4.1.89.70.1 | ScalarrlRCliMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.70.2 | ScalarrlRCliUserPassword | read-write | mandatory | RCLI User mode Password |
| 1.3.6.1.4.1.89.70.3 | ScalarrlRCliEnablePassword | read-write | mandatory | RCLI Enable mode Password |
| 1.3.6.1.4.1.89.70.4 | ScalarrlRCliConfigPassword | read-write | mandatory | RCLI Config mode Password |
| 1.3.6.1.4.1.89.70.5 | ScalarrlRCliTimer | read-write | mandatory | RCLI Timeout |
| 1.3.6.1.4.1.89.70.6 | ScalarrlRcliFileAction | read-write | mandatory | RCLI Configuration File action determines whether The device configuration after reset will be set by the configuration file content or not. |
| 1.3.6.1.4.1.89.71 | NoderlBgp | |||
| 1.3.6.1.4.1.89.71 | NodersIpZhrReqStaticConnNotAccepted | The requested static connection was not accepted because there is no available IP virtual address to allocate to it. | ||
| 1.3.6.1.4.1.89.72 | NoderlAgentsCapabilitiesGroups | |||
| 1.3.6.1.4.1.89.72 | NodersIpZhrVirtualIpAsSource | The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections. | ||
| 1.3.6.1.4.1.89.73 | NoderlAggregateVlan | |||
| 1.3.6.1.4.1.89.73 | NodersIpZhrNotAllocVirtualIp | The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this… | ||
| 1.3.6.1.4.1.89.73.1 | ScalarrlAggregateVlanMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.73.2 | TablerlAggregateVlanTable | not-accessible | mandatory | The table creates an aggregateVlans, the IfIndex is from 10000 |
| 1.3.6.1.4.1.89.73.2.1 | RowrlAggregateVlanEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.73.2.1.1 | ColumnrlAggregateVlanIndex | not-accessible | mandatory | This index indicate the aggrigateVlan id, the aggregate vlan index is starting from 10000 |
| 1.3.6.1.4.1.89.73.2.1.2 | ColumnrlAggregateVlanName | read-write | mandatory | The name of the aggregateVlan |
| 1.3.6.1.4.1.89.73.2.1.3 | ColumnrlAggregateVlanPhysAddressType | read-write | mandatory | This variable indicates whether the physical address assigned to this VLAN should be the default one or be chosen from the set of reserved physical addresses o… |
| 1.3.6.1.4.1.89.73.2.1.4 | ColumnrlAggregateVlanStatus | read-write | mandatory | The status of the aggregateVlan table entry. It's used to delete an entry |
| 1.3.6.1.4.1.89.73.3 | TablerlAggregateSubVlanTable | not-accessible | mandatory | The table indicates all the allocated sub-vlans to the aggregateVlans, an entry in the rlAggregateVlanTable must be exist before allocating the subVlans |
| 1.3.6.1.4.1.89.73.3.1 | RowrlAggregateSubVlanEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.73.3.1.1 | ColumnrlAggregateSubVlanIfIndex | read-only | mandatory | Indicate the subVlan that allocated to the aggregate vlan |
| 1.3.6.1.4.1.89.73.3.1.2 | ColumnrlAggregateSubVlanStatus | read-write | mandatory | The status of the aggregateSubVlan table entry. It's used to delete an entry |
| 1.3.6.1.4.1.89.73.4 | ScalarrlAggregateVlanArpProxy | read-write | mandatory | When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on different sub-vlans, which belong to the same Super VLAN.The router resp… |
| 1.3.6.1.4.1.89.74 | NodersSnmpSetRequestInSpecialCfgState | An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during s… | ||
| 1.3.6.1.4.1.89.75 | NoderlGmrp | |||
| 1.3.6.1.4.1.89.75.1 | ScalarrlGmrpSupported | read-only | mandatory | Is Gmrp supported in the device or not. |
| 1.3.6.1.4.1.89.75.2 | ScalarrlGmrpMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.75.3 | TablerlPortGmrpTimersTable | not-accessible | mandatory | A table of Gmrp timer values for every bridge port. This is indexed by dot1dBasePort. |
| 1.3.6.1.4.1.89.75.3.1 | RowrlPortGmrpTimersEntry | not-accessible | mandatory | Gmrp timer values for a bridge port. |
| 1.3.6.1.4.1.89.75.3.1.1 | ColumnrlPortGmrpJoinTime | read-write | mandatory | The Gmrp Join time, in centiseconds. |
| 1.3.6.1.4.1.89.75.3.1.2 | ColumnrlPortGmrpLeaveTime | read-write | mandatory | The Gmrp Leave time, in centiseconds. |
| 1.3.6.1.4.1.89.75.3.1.3 | ColumnrlPortGmrpLeaveAllTime | read-write | mandatory | The Gmrp LeaveAll time, in centiseconds. |
| 1.3.6.1.4.1.89.75.3.1.4 | ColumnrlPortGmrpOverrideGarp | read-write | mandatory | If enabled{1}, Gmrp timer values for this port are determined by the values in this entry. Otherwise, they are determined by the values in dot1dPortGarpTable. |
| 1.3.6.1.4.1.89.75.4 | TablerlGmrpVlanTable | not-accessible | mandatory | This table is to Enable/Disable Gmrp in the vlan. |
| 1.3.6.1.4.1.89.75.4.1 | RowrlGmrpVlanEntry | not-accessible | mandatory | An entry in the rlGmrpVlanTable. |
| 1.3.6.1.4.1.89.75.4.1.1 | ColumnrlGmrpVlanTag | read-only | mandatory | The tag of the VLAN for which this entry contains information. |
| 1.3.6.1.4.1.89.75.4.1.2 | ColumnrlGmrpVlanEnable | read-write | mandatory | Enable/Disable Gmrp in the vlan. |
| 1.3.6.1.4.1.89.76 | NoderlDhcpCl | |||
| 1.3.6.1.4.1.89.76.3 | TablerlDhcpClActionTable | not-accessible | mandatory | The (conceptual) table mentione IP address which must be released/renewed on the interface. |
| 1.3.6.1.4.1.89.76.3.1 | RowrlDhcpClActionEntry | not-accessible | mandatory | An entry (conceptual row) in dhcpClActionTable. |
| 1.3.6.1.4.1.89.76.3.1.1 | ColumnrlDhcpClActionIfIndex | read-only | mandatory | The interface which the action is implemented for or NULL if it implemented for all device. |
| 1.3.6.1.4.1.89.76.3.1.2 | ColumnrlDhcpClActionStatus | read-write | mandatory | The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface. |
| 1.3.6.1.4.1.89.76.3.1.3 | ColumnrlDhcpClActionHostName | read-write | mandatory | This option specifies the name of the client. |
| 1.3.6.1.4.1.89.76.4 | ScalarrlDhcpApprovalEnabled | read-only | mandatory | DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip … |
| 1.3.6.1.4.1.89.76.5 | TablerlDhcpApprovalWaitingTable | not-accessible | mandatory | IP addresses waiting for approval. |
| 1.3.6.1.4.1.89.76.5.1 | RowrlDhcpApprovalWaitingEntry | not-accessible | mandatory | An entry in rlDhcpApprovalWaitingTable. |
| 1.3.6.1.4.1.89.76.5.1.1 | ColumnrlDhcpApprovalWaitingIfIndex | read-only | mandatory | IP interface ifIndex. |
| 1.3.6.1.4.1.89.76.5.1.2 | ColumnrlDhcpApprovalWaitingAddress | read-only | mandatory | IP Address waiting for approval. |
| 1.3.6.1.4.1.89.76.5.1.3 | ColumnrlDhcpApprovalWaitingMask | read-only | mandatory | Mask waiting for approval. |
| 1.3.6.1.4.1.89.76.5.1.4 | ColumnrlDhcpApprovalWaitingGateway | read-only | mandatory | Default gateway of received address. |
| 1.3.6.1.4.1.89.76.6 | TablerlDhcpApprovalActionTable | not-accessible | mandatory | Action for waiting ip address (approve/decline). |
| 1.3.6.1.4.1.89.76.6.1 | RowrlDhcpApprovalActionEntry | not-accessible | mandatory | An entry in rlDhcpApprovalActionTable. |
| 1.3.6.1.4.1.89.76.6.1.1 | ColumnrlDhcpApprovalActionIfIndex | read-only | mandatory | IP interface ifIndex. |
| 1.3.6.1.4.1.89.76.6.1.2 | ColumnrlDhcpApprovalActionAddress | read-only | mandatory | IP Address. |
| 1.3.6.1.4.1.89.76.6.1.3 | ColumnrlDhcpApprovalActionMask | read-only | mandatory | IP Address mask. |
| 1.3.6.1.4.1.89.76.6.1.4 | ColumnrlDhcpApprovalActionApprove | read-write | mandatory | Approve or decline ip address. |
| 1.3.6.1.4.1.89.76.7 | TablerlDhcpClCommandTable | read-only | mandatory | Action MIB for DHCP Renew command. |
| 1.3.6.1.4.1.89.76.7.1 | RowrlDhcpClCommandEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.76.7.1.2 | ColumnrlDhcpClCommandAction | read-write | mandatory | Action to apply. |
| 1.3.6.1.4.1.89.77 | NoderlStormCtrl | |||
| 1.3.6.1.4.1.89.77.1 | ScalarrlStormCtrlSupport | read-only | mandatory | Identify if the strom control protection is supported |
| 1.3.6.1.4.1.89.77.2 | ScalarrlStormCtrlMibVersion | read-only | mandatory | MIB's version, the current version is 3. |
| 1.3.6.1.4.1.89.77.3 | ScalarrlStormCtrlRateUnitTypeSupport | read-only | mandatory | the supported rate unit type for the storm rate control |
| 1.3.6.1.4.1.89.77.4 | ScalarrlStormCtrlTypeSupport | read-only | mandatory | the supported frame type for the storm control protection |
| 1.3.6.1.4.1.89.77.5 | ScalarrlStormCtrlRateSupportPerType | read-only | mandatory | identify if rate control is supported for each frame type |
| 1.3.6.1.4.1.89.77.6 | ScalarrlStormCtrlEnbaleDependencyBetweenTypes | read-only | mandatory | indicate enable limitation of dependency between frame types, such as enabling of multicast should be with the enabling of broadcast type (bcm 5632) |
| 1.3.6.1.4.1.89.77.7 | ScalarrlStormCtrlRateDependencyBetweenTypes | read-only | mandatory | indicate limitation of dependency between frame types for rate assignment, for example: assigning of rate limit for unicast frame must assigning the same rate … |
| 1.3.6.1.4.1.89.77.8 | TablerlStormCtrlTable | not-accessible | mandatory | The table contains the storm control protection per port |
| 1.3.6.1.4.1.89.77.8.1 | RowrlStormCtrlEntry | not-accessible | mandatory | storm control protection, defined per port,frame type and rate |
| 1.3.6.1.4.1.89.77.8.1.1 | ColumnrlStormCtrlRateType | read-write | mandatory | indicate the rate unit type |
| 1.3.6.1.4.1.89.77.8.1.2 | ColumnrlStormCtrlUnknownUnicastEnable | read-write | mandatory | enable or disable the storm control for unknown unicast frames |
| 1.3.6.1.4.1.89.77.8.1.3 | ColumnrlStormCtrlUnknownUnicastRate | read-write | mandatory | set the storm control rate limit for the unknown unicast frames, 0 indicate blocking of frames from this type. |
| 1.3.6.1.4.1.89.77.8.1.4 | ColumnrlStormCtrlUnknownMulticastEnable | read-write | mandatory | enable or disable the storm control for unknown multicast frames |
| 1.3.6.1.4.1.89.77.8.1.5 | ColumnrlStormCtrlUnknownMulticastRate | read-write | mandatory | set the storm control rate limit for the unknown multicast frames, 0 indicate blocking of frames from this type. |
| 1.3.6.1.4.1.89.77.8.1.6 | ColumnrlStormCtrlBroadcastEnable | read-write | mandatory | enable or disable the storm control for Broadcast frames |
| 1.3.6.1.4.1.89.77.8.1.7 | ColumnrlStormCtrlBroadcastRate | read-write | mandatory | set the storm control rate limit for the Broadcast frames, 0 indicate blocking of frames from this type. |
| 1.3.6.1.4.1.89.77.8.1.8 | ColumnrlStormCtrlMulticastEnable | read-write | mandatory | enable or disable the storm control for multicast frames |
| 1.3.6.1.4.1.89.77.8.1.9 | ColumnrlStormCtrlMulticastRate | read-write | mandatory | set the storm control rate limit for the multicast frames, 0 indicate blocking of frames from this type. |
| 1.3.6.1.4.1.89.77.8.1.10 | ColumnrlStormCtrlSetDefaultRateType | read-write | mandatory | indicate if return the rate unit type to its default. |
| 1.3.6.1.4.1.89.77.8.1.11 | ColumnrlStormCtrlSetDefaultUnknownUnicastEnable | read-write | mandatory | indicate if return the storm control enable for unknown unicast frames to its default. |
| 1.3.6.1.4.1.89.77.8.1.12 | ColumnrlStormCtrlSetDefaultUnknownUnicastRate | read-write | mandatory | indicate if return the storm control rate limit for the unknown unicast frames to its default. |
| 1.3.6.1.4.1.89.77.8.1.13 | ColumnrlStormCtrlSetDefaultUnknownMulticastEnable | read-write | mandatory | indicate if return the storm control enable for unknown multicast frames to its default. |
| 1.3.6.1.4.1.89.77.8.1.14 | ColumnrlStormCtrlSetDefaultUnknownMulticastRate | read-write | mandatory | indicate if return the storm control rate limit for the unknown multicast frames to its default. |
| 1.3.6.1.4.1.89.77.8.1.15 | ColumnrlStormCtrlSetDefaultBroadcastEnable | read-write | mandatory | indicate if return the storm control enable for Broadcast frames to its default. |
| 1.3.6.1.4.1.89.77.8.1.16 | ColumnrlStormCtrlSetDefaultBroadcastRate | read-write | mandatory | indicate if return the storm control rate limit for the Broadcast frames to its default. |
| 1.3.6.1.4.1.89.77.8.1.17 | ColumnrlStormCtrlSetDefaultMulticastEnable | read-write | mandatory | indicate if return the storm control for multicast frames to its default. |
| 1.3.6.1.4.1.89.77.8.1.18 | ColumnrlStormCtrlSetDefaultMulticastRate | read-write | mandatory | indicate if return the storm control rate limit for the multicast frames to its default. |
| 1.3.6.1.4.1.89.77.9 | TablerlStormCtrlGroupTable | not-accessible | mandatory | The table contains per port for each supported frame type to which group it belongs. |
| 1.3.6.1.4.1.89.77.9.1 | RowrlStormCtrlGroupEntry | not-accessible | mandatory | group id for each supported frame type defined per port. |
| 1.3.6.1.4.1.89.77.9.1.1 | ColumnrlStormCtrlGroupUnknownUnicastId | read-only | mandatory | Indicates the id of the group for unknown unicast frame type that the port belongs to, 0 indicates that unknown unicast frame type is not supported. |
| 1.3.6.1.4.1.89.77.9.1.2 | ColumnrlStormCtrlGroupUnknownMulticastId | read-only | mandatory | Indicates the id of the group for unknown multicast frame type that the port belongs to, 0 indicates that unknown multicast frame type is not supported. |
| 1.3.6.1.4.1.89.77.9.1.3 | ColumnrlStormCtrlGroupBroadcastId | read-only | mandatory | Indicates the id of the group for broadcast frame type that the port belongs to, 0 indicates that broadcast frame type is not supported. |
| 1.3.6.1.4.1.89.77.9.1.4 | ColumnrlStormCtrlGroupMulticastId | read-only | mandatory | Indicates the id of the group for multicast frame type that the port belongs to, 0 indicates that multicast frame type is not supported. |
| 1.3.6.1.4.1.89.78 | NoderlSsh | |||
| 1.3.6.1.4.1.89.79 | NoderlAAA | |||
| 1.3.6.1.4.1.89.80 | NoderlRadius | |||
| 1.3.6.1.4.1.89.81 | NoderlTraceRoute | |||
| 1.3.6.1.4.1.89.81.1 | ScalarrlTraceRouteMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.82 | NoderlSyslog | |||
| 1.3.6.1.4.1.89.83 | NoderlEnv | |||
| 1.3.6.1.4.1.89.84 | NoderlSmon | |||
| 1.3.6.1.4.1.89.84.1 | ScalarrlPortCopyMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.84.2 | ScalarrlPortCopySupport | read-only | mandatory | supported - The standard portCopy is supported. notSupported - the standard portCopy is not supported. only basic portCopy operation is supported. |
| 1.3.6.1.4.1.89.84.3 | TablerlPortCopyVlanTaggingTable | not-accessible | mandatory | A supplementing table for portCopyTable. For every portCopyDest a vlan-tagging option is available. |
| 1.3.6.1.4.1.89.84.3.1 | RowrlPortCopyVlanTaggingEntry | not-accessible | mandatory | Each entry specify how mirrored packets will transmit from the portCopyDest: Tagged or unTagged. The values in this entry will be valid only when the dot1dBase… |
| 1.3.6.1.4.1.89.84.3.1.1 | ColumnrlPortCopyVlanTagging | read-write | mandatory | TRUE - Mirrored packets will transmit from portCopyDest - Tagged FALSE - Mirrored packets will transmit from portCopyDest - unTagged |
| 1.3.6.1.4.1.89.85 | NoderlSocket | |||
| 1.3.6.1.4.1.89.85.1 | ScalarrlSocketMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.85.2 | TablerlSocketTable | not-accessible | mandatory | The (conceptual) table listing the sockets which are currently open in the system. |
| 1.3.6.1.4.1.89.85.2.1 | RowrlSocketEntry | not-accessible | mandatory | An entry (conceptual row) in the SocketTable. |
| 1.3.6.1.4.1.89.85.2.1.1 | ColumnrlSocketId | read-only | mandatory | The value of the id of the socket. |
| 1.3.6.1.4.1.89.85.2.1.2 | ColumnrlSocketType | read-only | mandatory | Specifies the type of the socket. |
| 1.3.6.1.4.1.89.85.2.1.3 | ColumnrlSocketState | read-only | mandatory | Specifies the state in which the socket is in. |
| 1.3.6.1.4.1.89.85.2.1.4 | ColumnrlSocketBlockMode | read-only | mandatory | Specifies the blocking mode of the socket. |
| 1.3.6.1.4.1.89.85.2.1.5 | ColumnrlSocketUpTime | read-only | mandatory | The time elapsed since this socket was created. |
| 1.3.6.1.4.1.89.86 | NoderlDigitalKeyManage | |||
| 1.3.6.1.4.1.89.86.1 | TablerlMD5KeyChainTable | not-accessible | mandatory | Key-chains and key ID's |
| 1.3.6.1.4.1.89.86.1.1 | RowrlMD5KeyChainEntry | not-accessible | mandatory | Key-chain with key ID that belongs to this chain |
| 1.3.6.1.4.1.89.86.1.1.1 | ColumnrlMD5KeyChainName | read-only | mandatory | Name of the key-chain to which belongs the secret authentication key |
| 1.3.6.1.4.1.89.86.1.1.2 | ColumnrlMD5KeyChainKeyId | read-only | mandatory | A 8-bit identifier for the secret authentication key. This identifier is the same as key ID used in rlMD5KeyTable. |
| 1.3.6.1.4.1.89.86.1.1.3 | ColumnrlMD5KeyChainKeyRowStatus | read-write | mandatory | It is used to insert, update or delete an entry |
| 1.3.6.1.4.1.89.86.2 | TablerlMD5KeyTable | not-accessible | mandatory | Secret authentication keys used by MD5 Authentication Algorithm |
| 1.3.6.1.4.1.89.86.2.1 | RowrlMD5KeyEntry | not-accessible | mandatory | Secret authentication key with all related parameters |
| 1.3.6.1.4.1.89.86.2.1.1 | ColumnrlMD5KeyId | read-only | mandatory | A 8-bit identifier for the secret authentication key |
| 1.3.6.1.4.1.89.86.2.1.2 | ColumnrlMD5Key | read-write | mandatory | The 128-bit secret authentication key. The key can get value only once and cannot be modified. When read, rlMD5KeyChainKey always returns an Octet String of le… |
| 1.3.6.1.4.1.89.86.2.1.3 | ColumnrlMD5KeyStartAccept | read-write | mandatory | The time that the router will start accepting packets that have been created with the given key |
| 1.3.6.1.4.1.89.86.2.1.4 | ColumnrlMD5KeyStartGenerate | read-write | mandatory | The time that the router will start using the key for packet generation |
| 1.3.6.1.4.1.89.86.2.1.5 | ColumnrlMD5KeyStopGenerate | read-write | mandatory | The time that the router will stop using the key for packet generation |
| 1.3.6.1.4.1.89.86.2.1.6 | ColumnrlMD5KeyStopAccept | read-write | mandatory | The time that the router will stop accepting packets that have been created with the given key |
| 1.3.6.1.4.1.89.86.2.1.7 | ColumnrlMD5KeyRowStatus | read-write | mandatory | It is used to insert, update or delete an entry |
| 1.3.6.1.4.1.89.87 | NoderlCopy | |||
| 1.3.6.1.4.1.89.88 | NoderlQosCliMib | |||
| 1.3.6.1.4.1.89.89 | NoderlMngInf | |||
| 1.3.6.1.4.1.89.90 | NoderlPhy | |||
| 1.3.6.1.4.1.89.91 | NoderlJumboFrames | |||
| 1.3.6.1.4.1.89.91.1 | ScalarrlJumboFramesCurrentStatus | read-only | mandatory | Show the current Jumbo Frames status |
| 1.3.6.1.4.1.89.91.2 | ScalarrlJumboFramesStatusAfterReset | read-write | mandatory | Set the Jumbo Frames status after reset |
| 1.3.6.1.4.1.89.92 | NoderlTimeSynchronization | |||
| 1.3.6.1.4.1.89.93 | NoderlDnsCl | |||
| 1.3.6.1.4.1.89.94 | NoderlCDB | |||
| 1.3.6.1.4.1.89.94.1 | ScalarrlStartupCDBChanged | read-only | mandatory | Indicates whether the startup CDB has changed between the router's last two reboots |
| 1.3.6.1.4.1.89.94.2 | ScalarrlManualReboot | read-only | mandatory | Indicates whether the device was shutdown orderly before reboot or not (i.e. power failure) |
| 1.3.6.1.4.1.89.95 | Noderldot1x | |||
| 1.3.6.1.4.1.89.95.1 | Scalarrldot1xMibVersion | read-only | mandatory | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.89.95.2 | Tablerldot1xExtAuthSessionStatsTable | not-accessible | mandatory | A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may… |
| 1.3.6.1.4.1.89.95.2.1 | Rowrldot1xExtAuthSessionStatsEntry | not-accessible | mandatory | The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the f… |
| 1.3.6.1.4.1.89.95.2.1.1 | ColumnrlDot1xAuthSessionAuthenticMethod | read-only | mandatory | The authentication method used to establish the session. |
| 1.3.6.1.4.1.89.95.3 | Scalarrldot1xGuestVlanSupported | read-only | mandatory | indicate if guest vlan is supported. |
| 1.3.6.1.4.1.89.95.4 | Scalarrldot1xGuestVlanVID | read-write | mandatory | specify the guest vlan tag , 0 for non exiting. |
| 1.3.6.1.4.1.89.95.5 | Scalarrldot1xGuestVlanPorts | read-write | mandatory | the ports that can be members in the guest vlan |
| 1.3.6.1.4.1.89.95.6 | Scalarrldot1xUnAuthenticatedVlanSupported | read-only | mandatory | indicate if unauthenticated Vlan is supported. |
| 1.3.6.1.4.1.89.95.7 | Tablerldot1xUnAuthenticatedVlanTable | not-accessible | mandatory | port belong to vlan in all port authenticated state except force unauthenticated table |
| 1.3.6.1.4.1.89.95.7.1 | Rowrldot1xUnAuthenticatedVlanEntry | not-accessible | mandatory | port belong to vlan in all port authenticated state except force unauthenticated entry |
| 1.3.6.1.4.1.89.95.7.1.1 | Columnrldot1xUnAuthenticatedVlanStatus | read-write | mandatory | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.89.95.8 | Scalarrldot1xUserBasedVlanSupported | read-only | mandatory | indicate if user based Vlan is supported. |
| 1.3.6.1.4.1.89.95.9 | Scalarrldot1xUserBasedVlanPorts | read-write | mandatory | the ports that can be members in the user based vlan |
| 1.3.6.1.4.1.89.95.10 | Tablerldot1xAuthenticationPortTable | not-accessible | mandatory | A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system. |
| 1.3.6.1.4.1.89.95.10.1 | Rowrldot1xAuthenticationPortEntry | not-accessible | mandatory | The Port number and mac method |
| 1.3.6.1.4.1.89.95.10.1.1 | Columnrldot1xAuthenticationPortMethod | read-write | mandatory | The value of the mac based authenication. |
| 1.3.6.1.4.1.89.95.11 | Tablerldot1xAuthMultiStatsTable | not-accessible | mandatory | A table that contains the statistics objects for the Authenticator PAE associated with each Port and MAC for multisession 802.1x mode of operation. An entry ap… |
| 1.3.6.1.4.1.89.95.11.1 | Rowrldot1xAuthMultiStatsEntry | not-accessible | mandatory | The statistics information for an Authenticator PAE. |
| 1.3.6.1.4.1.89.95.11.1.1 | Columnrldot1xAuthMultiStatsPortNumber | read-only | mandatory | Port Number. |
| 1.3.6.1.4.1.89.95.11.1.2 | Columnrldot1xAuthMultiStatsSourceMac | read-only | mandatory | Mac of the authentication session. |
| 1.3.6.1.4.1.89.95.11.1.3 | Columnrldot1xAuthMultiEapolFramesRx | read-only | mandatory | The number of valid EAPOL frames of any type that have been received by this Authenticator. |
| 1.3.6.1.4.1.89.95.11.1.4 | Columnrldot1xAuthMultiEapolFramesTx | read-only | mandatory | The number of EAPOL frames of any type that have been transmitted by this Authenticator. |
| 1.3.6.1.4.1.89.95.11.1.5 | Columnrldot1xAuthMultiEapolStartFramesRx | read-only | mandatory | The number of EAPOL Start frames that have been received by this Authenticator. |
| 1.3.6.1.4.1.89.95.11.1.6 | Columnrldot1xAuthMultiEapolLogoffFramesRx | read-only | mandatory | The number of EAPOL Logoff frames that have been received by this Authenticator. |
| 1.3.6.1.4.1.89.95.11.1.7 | Columnrldot1xAuthMultiEapolRespIdFramesRx | read-only | mandatory | The number of EAP Resp/Id frames that have been received by this Authenticator. |
| 1.3.6.1.4.1.89.95.11.1.8 | Columnrldot1xAuthMultiEapolRespFramesRx | read-only | mandatory | The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator. |
| 1.3.6.1.4.1.89.95.11.1.9 | Columnrldot1xAuthMultiEapolReqIdFramesTx | read-only | mandatory | The number of EAP Req/Id frames that have been transmitted by this Authenticator. |
| 1.3.6.1.4.1.89.95.11.1.10 | Columnrldot1xAuthMultiEapolReqFramesTx | read-only | mandatory | The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator. |
| 1.3.6.1.4.1.89.95.11.1.11 | Columnrldot1xAuthMultiInvalidEapolFramesRx | read-only | mandatory | The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized. |
| 1.3.6.1.4.1.89.95.11.1.12 | Columnrldot1xAuthMultiEapLengthErrorFramesRx | read-only | mandatory | The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid. |
| 1.3.6.1.4.1.89.95.12 | Tablerldot1xAuthMultiDiagTable | not-accessible | mandatory | A table that contains the diagnostics objects for the Authenticator PAE associated with each Port and MAC. An entry appears in this table for each port and MAC… |
| 1.3.6.1.4.1.89.95.12.1 | Rowrldot1xAuthMultiDiagEntry | not-accessible | mandatory | The diagnostics information for an Authenticator PAE. |
| 1.3.6.1.4.1.89.95.12.1.1 | Columnrldot1xAuthMultiDiagPortNumber | read-only | mandatory | Port Number. |
| 1.3.6.1.4.1.89.95.12.1.2 | Columnrldot1xAuthMultiDiagSourceMac | read-only | mandatory | Mac of the authentication session. |
| 1.3.6.1.4.1.89.95.12.1.3 | Columnrldot1xAuthMultiEntersConnecting | read-only | mandatory | Counts the number of times that the state machine transitions to the CONNECTING state from any other state. |
| 1.3.6.1.4.1.89.95.12.1.4 | Columnrldot1xAuthMultiEntersAuthenticating | read-only | mandatory | Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received… |
| 1.3.6.1.4.1.89.95.12.1.5 | Columnrldot1xAuthMultiAuthSuccessWhileAuthenticating | read-only | mandatory | Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine ind… |
| 1.3.6.1.4.1.89.95.12.1.6 | Columnrldot1xAuthMultiAuthFailWhileAuthenticating | read-only | mandatory | Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating a… |
| 1.3.6.1.4.1.89.95.12.1.7 | Columnrldot1xAuthMultiAuthReauthsWhileAuthenticating | read-only | mandatory | Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE… |
| 1.3.6.1.4.1.89.95.12.1.8 | Columnrldot1xAuthMultiAuthEapStartsWhileAuthenticating | read-only | mandatory | Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Su… |
| 1.3.6.1.4.1.89.95.12.1.9 | Columnrldot1xAuthMultiAuthReauthsWhileAuthenticated | read-only | mandatory | Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRU… |
| 1.3.6.1.4.1.89.95.12.1.10 | Columnrldot1xAuthMultiAuthEapStartsWhileAuthenticated | read-only | mandatory | Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the S… |
| 1.3.6.1.4.1.89.95.12.1.11 | Columnrldot1xAuthMultiBackendResponses | read-only | mandatory | Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry… |
| 1.3.6.1.4.1.89.95.12.1.12 | Columnrldot1xAuthMultiBackendAccessChallenges | read-only | mandatory | Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing … |
| 1.3.6.1.4.1.89.95.12.1.13 | Columnrldot1xAuthMultiBackendOtherRequestsToSupplicant | read-only | mandatory | Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplic… |
| 1.3.6.1.4.1.89.95.12.1.14 | Columnrldot1xAuthMultiBackendNonNakResponsesFromSupplicant | read-only | mandatory | Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than E… |
| 1.3.6.1.4.1.89.95.12.1.15 | Columnrldot1xAuthMultiBackendAuthSuccesses | read-only | mandatory | Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transi… |
| 1.3.6.1.4.1.89.95.13 | Tablerldot1xAuthMultiSessionStatsTable | not-accessible | mandatory | A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may… |
| 1.3.6.1.4.1.89.95.13.1 | Rowrldot1xAuthMultiSessionStatsEntry | not-accessible | mandatory | The session statistics information for an Authenticator PAE. This shows the mandatory values being collected for each session that is still in progress, or the… |
| 1.3.6.1.4.1.89.95.13.1.1 | Columnrldot1xAuthMultiSessionStatsPortNumber | read-only | mandatory | Port Number. |
| 1.3.6.1.4.1.89.95.13.1.2 | Columnrldot1xAuthMultiSessionStatsSourceMac | read-only | mandatory | Mac of the authentication session. |
| 1.3.6.1.4.1.89.95.13.1.3 | Columnrldot1xAuthMultiSessionOctetsRx | read-only | mandatory | The number of octets received in user data frames on this Port during the session. |
| 1.3.6.1.4.1.89.95.13.1.4 | Columnrldot1xAuthMultiSessionOctetsTx | read-only | mandatory | The number of octets transmitted in user data frames on this Port during the session. |
| 1.3.6.1.4.1.89.95.13.1.5 | Columnrldot1xAuthMultiSessionFramesRx | read-only | mandatory | The number of user data frames received on this Port during the session. |
| 1.3.6.1.4.1.89.95.13.1.6 | Columnrldot1xAuthMultiSessionFramesTx | read-only | mandatory | The number of user data frames transmitted on this Port during the session. |
| 1.3.6.1.4.1.89.95.13.1.7 | Columnrldot1xAuthMultiSessionId | read-only | mandatory | A unique identifier for the session, in the form of a printable ASCII string of at least three characters. |
| 1.3.6.1.4.1.89.95.13.1.8 | Columnrldot1xAuthMultiSessionTime | read-only | mandatory | The duration of the session in seconds. |
| 1.3.6.1.4.1.89.95.13.1.9 | Columnrldot1xAuthMultiSessionUserName | read-only | mandatory | The User-Name representing the identity of the Supplicant PAE. |
| 1.3.6.1.4.1.89.95.14 | Tablerldot1xAuthMultiConfigTable | not-accessible | mandatory | A table that contains the configuration objects for the Authenticator PAE associated with each port and MAC. An entry appears in this table for each port and M… |
| 1.3.6.1.4.1.89.95.14.1 | Rowrldot1xAuthMultiConfigEntry | not-accessible | mandatory | The configuration information for an Authenticator PAE. |
| 1.3.6.1.4.1.89.95.14.1.1 | Columnrldot1xAuthMultiPortNumber | read-only | mandatory | Port Number. |
| 1.3.6.1.4.1.89.95.14.1.2 | Columnrldot1xAuthMultiSourceMac | read-only | mandatory | Mac of the authentication session. |
| 1.3.6.1.4.1.89.95.14.1.3 | Columnrldot1xAuthMultiPaeState | read-only | mandatory | The current value of the Authenticator PAE state machine. |
| 1.3.6.1.4.1.89.95.14.1.4 | Columnrldot1xAuthMultiBackendAuthState | read-only | mandatory | The current state of the Backend Authentication state machine. |
| 1.3.6.1.4.1.89.95.14.1.5 | Columnrldot1xAuthMultiControlledPortStatus | read-only | mandatory | The current value of the controlled Port status parameter for the Port. |
| 1.3.6.1.4.1.89.95.15 | Scalarrldot1xBpduFilteringEnabled | read-write | mandatory | Specify that when 802.1x is globally disabled, 802.1x BPDU packets would be filtered or bridged. |
| 1.3.6.1.4.1.89.96 | NoderlFile | |||
| 1.3.6.1.4.1.89.97 | NoderlAAAEap | |||
| 1.3.6.1.4.1.89.98 | NoderlSNMP | |||
| 1.3.6.1.4.1.89.100 | NoderlSsl | |||
| 1.3.6.1.4.1.89.101 | NoderlMacBasePrio | |||
| 1.3.6.1.4.1.89.102 | NoderlWlanAccessPoint | |||
| 1.3.6.1.4.1.89.103 | NoderlLocalization | |||
| 1.3.6.1.4.1.89.104 | NoderlRs232 | |||
| 1.3.6.1.4.1.89.105 | NoderlNicRedundancy | |||
| 1.3.6.1.4.1.89.106 | NoderlAmap | |||
| 1.3.6.1.4.1.89.107 | NoderlStack | |||
| 1.3.6.1.4.1.89.108 | NoderlPoe | |||
| 1.3.6.1.4.1.89.109 | NoderlUPnP | |||
| 1.3.6.1.4.1.89.110 | NoderlLldp | |||
| 1.3.6.1.4.1.89.111 | NoderlOib | |||
| 1.3.6.1.4.1.89.112 | NoderlBridgeSecurity | |||
| 1.3.6.1.4.1.89.113 | NoderlDhcpSpoofing | |||
| 1.3.6.1.4.1.89.114 | NoderlBonjour | |||
| 1.3.6.1.4.1.89.115 | NoderlLinksysSmartMIB | |||
| 1.3.6.1.4.1.89.116 | NoderlBrgMulticast | |||
| 1.3.6.1.4.1.89.117 | NoderlBrgMcMngr | |||
| 1.3.6.1.4.1.89.118 | NoderlGlobalIpAddrTable | |||
| 1.3.6.1.4.1.89.119 | NodedlPrivate | |||
| 1.3.6.1.4.1.89.120 | NoderlSecuritySuiteMib | |||
| 1.3.6.1.4.1.89.121 | NoderlIntel | |||
| 1.3.6.1.4.1.89.123 | NoderlAutoUpdate | |||
| 1.3.6.1.4.1.89.124 | NoderlCpuCounters | |||
| 1.3.6.1.4.1.89.136 | NodersPingCompletion | A rsPingCompleted trap is sent at the completion of a sequence of pings if such a trap was requested when the sequence was initiated. The trap severity is info… | ||
| 1.3.6.1.4.1.89.137 | NodepppSecurityViolation | This trap indicates that a PPP link got an unrecognized secret. The bound variables rndErrorDesc, rndErrorSeverity(== warning ), interface Number. and pppSecur… | ||
| 1.3.6.1.4.1.89.138 | NodefrDLCIStatudChange | |||
| 1.3.6.1.4.1.89.139 | NodepapFailedCommunication | |||
| 1.3.6.1.4.1.89.140 | NodechapFailedCommunication | |||
| 1.3.6.1.4.1.89.141 | NodersWSDRedundancySwitch | Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued. | ||
| 1.3.6.1.4.1.89.142 | NodersDhcpAllocationFailure | DHCP failed to allocate an IP address to a requesting host because of memory shortage or inadequate configuration of available IP addresses. | ||
| 1.3.6.1.4.1.89.145 | NoderlIpFftStnOverflow | The IP SFFT overflow. | ||
| 1.3.6.1.4.1.89.146 | NoderlIpFftSubOverflow | The IP NFFT overflow. | ||
| 1.3.6.1.4.1.89.147 | NoderlIpxFftStnOverflow | The IPX SFFT overflow. | ||
| 1.3.6.1.4.1.89.148 | NoderlIpxFftSubOverflow | The IPX NFFT overflow. | ||
| 1.3.6.1.4.1.89.149 | NoderlIpmFftOverflow | The IPM FFT overflow. | ||
| 1.3.6.1.4.1.89.150 | NoderlPhysicalDescriptionChanged | Indicates that the physical decription of the device has changed | ||
| 1.3.6.1.4.1.89.151 | Noderldot1dStpPortStateForwarding | The trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state. | ||
| 1.3.6.1.4.1.89.152 | Noderldot1dStpPortStateNotForwarding | The trap is sent by a bridge when any of its configured ports transitions from the Forwarding state to the Blocking state. | ||
| 1.3.6.1.4.1.89.153 | NoderlPolicyDropPacketTrap | Indicates that the packet drop due to the policy | ||
| 1.3.6.1.4.1.89.154 | NoderlPolicyForwardPacketTrap | Indicates that the packet has forward based on policy | ||
| 1.3.6.1.4.1.89.156 | NoderlIgmpProxyTableOverflow | An IGMP PROXY Table overflow. | ||
| 1.3.6.1.4.1.89.157 | NoderlIgmpV1MsgReceived | An IGMP Message of v1 received on ifIndex. | ||
| 1.3.6.1.4.1.89.158 | NoderlVrrpEntriesDeleted | One or more VRRP entries deleted due to IP interface deletion or transition. | ||
| 1.3.6.1.4.1.89.159 | NoderlHotSwapTrap | Hot swap trap. | ||
| 1.3.6.1.4.1.89.160 | NoderlTrunkPortAddedTrap | Informational trap indicating that a port is added to a trunk | ||
| 1.3.6.1.4.1.89.161 | NoderlTrunkPortRemovedTrap | This warning is generated when a port removed from a trunk. | ||
| 1.3.6.1.4.1.89.162 | NoderlTrunkPortNotCapableTrap | Informational trap indicating that a port can not be added to a trunk because of device limitations or diffrent swIfType. | ||
| 1.3.6.1.4.1.89.170 | NoderlLockPortTrap | Informational trap indicating that a locked port receive a frame with new source Mac Address. | ||
| 1.3.6.1.4.1.89.171 | NodevlanDynVlanAdded | add gvrp dynamic vlan | ||
| 1.3.6.1.4.1.89.172 | NodevlanDynVlanRemoved | remove gvrp dynamic vlan | ||
| 1.3.6.1.4.1.89.173 | NodevlanDynamicToStatic | vlan status was changed from dynamic to static | ||
| 1.3.6.1.4.1.89.174 | NodevlanStaticToDynamic | vlan status was changed from static to dynamic | ||
| 1.3.6.1.4.1.89.175 | NodedstrSysLog | Master receive trap from slave , and forward it as trap | ||
| 1.3.6.1.4.1.89.176 | NoderlEnvMonFanStateChange | Trap indicating the fan state. rndErrorSeverity will be: 0 for fan state nomal, notPresent 1 for fan state warning, notFunctioning 2 for fan state critical 3 f… | ||
| 1.3.6.1.4.1.89.177 | NoderlEnvMonPowerSupplyStateChange | Trap indicating the power supply state. rndErrorSeverity will be: 0 for power supply state nomal, notPresent 1 for power supply state warning, notFunctioning 2… | ||
| 1.3.6.1.4.1.89.178 | NoderlStackStateChange | Trap indicating the stack connection state 0 for stack state connected, 1 for stack state disconnected | ||
| 1.3.6.1.4.1.89.179 | NoderlEnvMonTemperatureRisingAlarm | Trap indicating that the temperature in the device has exceeded the device specific safe temperature threshold. | ||
| 1.3.6.1.4.1.89.183 | NoderlBrgMacAddFailedTrap | Informational trap indicating that adding dynamic mac/s failed due to full hash chain. | ||
| 1.3.6.1.4.1.89.184 | Noderldot1xPortStatusAuthorizedTrap | Informational trap indicating that port 802.1x status is authorized. | ||
| 1.3.6.1.4.1.89.185 | Noderldot1xPortStatusUnauthorizedTrap | Warning trap is indicating that port 802.1x status is unAuthorized. | ||
| 1.3.6.1.4.1.89.192 | NodeswIfTablePortLock | Warning trap is indicating port lock hase began. | ||
| 1.3.6.1.4.1.89.193 | NodeswIfTablePortUnLock | Warning trap is indicating port lock has ended. | ||
| 1.3.6.1.4.1.89.194 | NoderlAAAUserLocked | Warning trap indicating that the user was locked after number of consecutives unsuccessful login attempts. | ||
| 1.3.6.1.4.1.89.200 | NoderlWlanMIB | |||
| 1.3.6.1.4.1.89.202 | NodebpduGuardPortSuspended | Warning trap indicating - Port was suspended because there was BPDU Guard violation. | ||
| 1.3.6.1.4.1.89.203 | Noderldot1xSupplicantMacAuthorizedTrap | Informational trap indicating that MAC authentication supplicant is authenticated and is allowed to access the network. | ||
| 1.3.6.1.4.1.89.204 | Noderldot1xSupplicantMacUnauthorizedTrap | Warning trap is indicating that Radius server rejects MAC authentication supplicant. | ||
| 1.3.6.1.4.1.89.205 | NodestpLoopbackDetection | Warning trap indicating - A loopback was detected on port. | ||
| 1.3.6.1.4.1.89.206 | NodestpLoopbackDetectionResolved | Warning trap indicating - A loopback detection resolved on port. | ||
| 1.3.6.1.4.1.89.1000 | NoderndEndOfMibGroup | |||
| 1.3.6.1.4.1.89.1000.1 | ScalarrndEndOfMib | read-only | mandatory | This variable indicates this is the end of RND MIB. |