RADWARE-MIB
1276 objects
No module-level DESCRIPTION found.
Imported Objects
| IPV6-TC | Ipv6Address |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress |
| RFC1213-MIB | DisplayString ipAddrEntry PhysAddress |
| SNMPv2-TC | TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89 | Nodernd | |||
| 1.3.6.1.4.1.89.1 | NoderndMng | |||
| 1.3.6.1.4.1.89.1.1 | ScalarrndSysId | read-only | mandatory | Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II. |
| 1.3.6.1.4.1.89.1.2 | ScalarrndAction | read-write | mandatory | This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of prop… |
| 1.3.6.1.4.1.89.1.3 | ScalarrndFileName | read-write | mandatory | The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol. |
| 1.3.6.1.4.1.89.1.4 | ScalarremoveViewTablePermissionReductionCheck | read-write | mandatory | This is a True/False variable that determines whether the user is able to change his own view permissions (originally it wasn't allowed in order to prevent sit… |
| 1.3.6.1.4.1.89.1.5 | ScalarrsConfigurationAuditStatus | read-write | mandatory | Enable/Disable audit notifications. |
| 1.3.6.1.4.1.89.1.6 | ScalarrdwrPrintToLogAndCli | read-write | mandatory | print to system log file and to the CLI |
| 1.3.6.1.4.1.89.1.7 | ScalarrdwrClearTheLogFile | read-write | mandatory | Clears the system log file |
| 1.3.6.1.4.1.89.1.8 | ScalarrdwrAutoRowGenerationStatus | read-write | mandatory | Enable/Disable automatic generation of rows by device |
| 1.3.6.1.4.1.89.1.9 | ScalarrsConfigurationAuditingType | read-write | mandatory | Sets audit notifications type. |
| 1.3.6.1.4.1.89.2 | NoderndDeviceParams | |||
| 1.3.6.1.4.1.89.2.1 | ScalarrndBridgeType | read-only | mandatory | Identification of the RND bridge type. |
| 1.3.6.1.4.1.89.2.2 | ScalarrndInactiveArpTimeOut | read-write | mandatory | This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is del… |
| 1.3.6.1.4.1.89.2.3 | NoderndBridgeAlarm | |||
| 1.3.6.1.4.1.89.2.3.1 | ScalarrndErrorDesc | read-only | mandatory | A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device. |
| 1.3.6.1.4.1.89.2.3.2 | ScalarrndErrorSeverity | read-only | mandatory | The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device. |
| 1.3.6.1.4.1.89.2.4 | ScalarrndBrgVersion | read-write | mandatory | The application software version. |
| 1.3.6.1.4.1.89.2.5 | ScalarrndBrgFeatures | read-only | mandatory | A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte … |
| 1.3.6.1.4.1.89.2.6 | ScalarrndBrgLicense | read-write | mandatory | This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device. |
| 1.3.6.1.4.1.89.2.7 | NoderndIpHost | |||
| 1.3.6.1.4.1.89.2.7.1 | ScalarrndICMPTransmitionEnable | read-write | mandatory | This variable controlls the ability to transmit ICMP frames |
| 1.3.6.1.4.1.89.2.7.2 | TablerndCommunityTable | not-accessible | mandatory | The community table of the agent |
| 1.3.6.1.4.1.89.2.7.2.1 | RowrndCommunityEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.2.7.2.1.1 | ColumnrndCommunityMngStationAddr | read-write | mandatory | The management station that will be allowed to communicate with the agent IP address |
| 1.3.6.1.4.1.89.2.7.2.1.2 | ColumnrndCommunityString | read-write | mandatory | The community string with which the management station will communicate with the agent |
| 1.3.6.1.4.1.89.2.7.2.1.3 | ColumnrndCommunityAccess | read-write | mandatory | The allowed access to this management station |
| 1.3.6.1.4.1.89.2.7.2.1.4 | ColumnrndCommunityTrapsEnable | read-write | mandatory | Should the agent send traps to the management station |
| 1.3.6.1.4.1.89.2.7.2.1.5 | ColumnrndCommunityStatus | read-write | mandatory | The status of this entry. If the status is invalid the community entry will be deleted |
| 1.3.6.1.4.1.89.2.8 | ScalarrndManagedTime | read-write | mandatory | The time will be sent in the format hhmmss |
| 1.3.6.1.4.1.89.2.9 | ScalarrndManagedDate | read-write | mandatory | The date will be sent in the format ddmmyyyy |
| 1.3.6.1.4.1.89.2.11 | NodegenGroup | |||
| 1.3.6.1.4.1.89.2.11.1 | ScalargenGroupHWVersion | read-only | mandatory | Defines the HW version of the product. |
| 1.3.6.1.4.1.89.2.11.2 | ScalargenGroupConfigurationSymbol | read-only | mandatory | Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version. |
| 1.3.6.1.4.1.89.2.11.3 | ScalargenGroupHWStatus | read-only | mandatory | This attribute describes the status of the group hardware as detected by the sensors software. |
| 1.3.6.1.4.1.89.2.12 | ScalarrndSerialNumber | read-write | mandatory | The device's serial number. This parameter is sent with the device configuration but will not be set when the configuration is uploaded to the device. |
| 1.3.6.1.4.1.89.2.13 | ScalarrndApsoluteOSVersion | read-only | mandatory | The ApsoluteOS version. |
| 1.3.6.1.4.1.89.2.14 | ScalarrdwrDeviceType | read-only | mandatory | The Device Type. |
| 1.3.6.1.4.1.89.2.15 | ScalarrdwrDeviceNumberOfPorts | read-only | mandatory | The Device Number of Ports. |
| 1.3.6.1.4.1.89.2.16 | ScalarrdwrDevicePortsConfig | read-only | mandatory | The Device Ports Configuration. |
| 1.3.6.1.4.1.89.2.17 | ScalarrdwrDeviceThroughput | read-only | mandatory | The Device Throughput. |
| 1.3.6.1.4.1.89.2.18 | ScalarrdwrDeviceNetworkDriver | read-only | mandatory | The Device Network Driver. |
| 1.3.6.1.4.1.89.2.19 | ScalarrdwrDeviceCPUsNumber | read-only | mandatory | The Device number of CPU's. |
| 1.3.6.1.4.1.89.2.20 | ScalarrdwrDeviceActiveBoot | read-only | mandatory | The Device Active Boot. |
| 1.3.6.1.4.1.89.2.21 | ScalarrdwrDeviceSecondaryBoot | read-only | mandatory | The Device Secondary Boot. |
| 1.3.6.1.4.1.89.2.22 | ScalarrsCoresNumber | read-only | mandatory | Show cores number |
| 1.3.6.1.4.1.89.2.23 | ScalarrsCPUFrequency | read-only | mandatory | Show CPU frequency |
| 1.3.6.1.4.1.89.4 | NoderndInterface | |||
| 1.3.6.1.4.1.89.4.1 | TablerndIfTable | not-accessible | mandatory | RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost. |
| 1.3.6.1.4.1.89.4.1.1 | RowrndIfEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.4.1.1.1 | ColumnrndIfIndex | read-only | mandatory | Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (M… |
| 1.3.6.1.4.1.89.4.1.1.2 | ColumnrndIfBoardNum | read-only | mandatory | The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab. |
| 1.3.6.1.4.1.89.4.1.1.3 | ColumnrndIfNetAddress | read-only | mandatory | The IP address of the interface defined by the particular value of rndIfIndex. |
| 1.3.6.1.4.1.89.4.1.1.4 | ColumnrndIfStatus | read-only | mandatory | The current status of the interface. |
| 1.3.6.1.4.1.89.4.1.1.5 | ColumnrndIfClockType | read-write | mandatory | rndIfClockType defines the type of clock each interface uses: internal or external. |
| 1.3.6.1.4.1.89.4.1.1.6 | ColumnrndIfBaudRate | read-write | mandatory | Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined. |
| 1.3.6.1.4.1.89.4.1.1.7 | ColumnrndIfCost | read-write | mandatory | This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proporti… |
| 1.3.6.1.4.1.89.4.1.1.8 | ColumnrndIfCompression | read-write | mandatory | Defines whether data compression is enabled or disabled for the interface. |
| 1.3.6.1.4.1.89.4.1.1.9 | ColumnrndIfCompressionStatus | read-only | mandatory | Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correct… |
| 1.3.6.1.4.1.89.4.1.1.10 | ColumnrndIfCompressionRate | read-only | mandatory | Percentage of compression. This variable applies only if rndCompressionStatus is active. |
| 1.3.6.1.4.1.89.4.1.1.11 | ColumnrndIfLATCompression | read-write | mandatory | Enable/Disable the LAT Compression. |
| 1.3.6.1.4.1.89.4.1.1.12 | ColumnrndIfCompressionType | read-only | mandatory | This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed… |
| 1.3.6.1.4.1.89.4.1.1.13 | ColumnrndIfFilterMode | read-write | mandatory | This parameter indicates the type of filtering in the device. |
| 1.3.6.1.4.1.89.4.1.1.14 | ColumnrndIfChannelType | read-write | mandatory | The type of the WAN channel |
| 1.3.6.1.4.1.89.4.1.1.15 | ColumnrndIfBridge | read-write | mandatory | This variable indicates whether this interface forward Layer II pakages. |
| 1.3.6.1.4.1.89.4.1.1.16 | ColumnrndHighPriorityIf | read-write | mandatory | This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager. |
| 1.3.6.1.4.1.89.4.1.1.17 | ColumnrndWanHeader | read-write | mandatory | This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older … |
| 1.3.6.1.4.1.89.4.1.1.18 | ColumnrndDuplexMode | read-write | mandatory | This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode. |
| 1.3.6.1.4.1.89.5 | NoderouteTableOverflow | An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP). | ||
| 1.3.6.1.4.1.89.7 | NodefanNotWorking | Fan Failure was detected | ||
| 1.3.6.1.4.1.89.10 | NoderesetRequired | This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing alg… | ||
| 1.3.6.1.4.1.89.12 | NodeendTftp | This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual … | ||
| 1.3.6.1.4.1.89.12 | NoderndIPX | |||
| 1.3.6.1.4.1.89.13 | NodeabortTftp | This trap indicates that in the device aborted a TFTP session with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual messa… | ||
| 1.3.6.1.4.1.89.14 | NodestartTftp | Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question | ||
| 1.3.6.1.4.1.89.15 | NodedeviceTemperatureNormal | Sent whenever the temperature changes back to normal | ||
| 1.3.6.1.4.1.89.16 | NodedeviceTemperatureHigh | Sent whenever the temperature changes to high | ||
| 1.3.6.1.4.1.89.16 | NoderndFACS | |||
| 1.3.6.1.4.1.89.16.1 | ScalarrndFACSDefaultAction | read-write | mandatory | Used to define the default action for the device, when no FACS statements applicable to a given frame are defined. |
| 1.3.6.1.4.1.89.16.2 | TablerndFACSActTable | not-accessible | mandatory | The table of FACS action. |
| 1.3.6.1.4.1.89.16.2.1 | RowrndFACSActEntry | not-accessible | mandatory | Each rndFACSActEntry consist of the following parameters |
| 1.3.6.1.4.1.89.16.2.1.1 | ColumnrndFACSActType | read-only | mandatory | This parameter indicate on which FACS Table the FACS action will preform. |
| 1.3.6.1.4.1.89.16.2.1.2 | ColumnrndFACSActIfIndex | read-only | mandatory | The interface to which this FACS entry is applicable. |
| 1.3.6.1.4.1.89.16.2.1.3 | ColumnrndFACSAction | read-write | mandatory | The management station that sends a SET request for one of these actions with indexes rndFACSType and rndFACSIfIndex defines the type and the interface Id for … |
| 1.3.6.1.4.1.89.16.3 | TablerndFACSTable | not-accessible | mandatory | The table of FACS statment. |
| 1.3.6.1.4.1.89.16.3.1 | RowrndFACSEntry | not-accessible | mandatory | Each FACS statment consist of the following parameters |
| 1.3.6.1.4.1.89.16.3.1.1 | ColumnrndFACSIfIndex | read-only | mandatory | The interface to which this FACS entry is applicable. |
| 1.3.6.1.4.1.89.16.3.1.2 | ColumnrndFACSProtocolType | read-only | mandatory | This parameter define the protocol the Security Access Control is applicable. |
| 1.3.6.1.4.1.89.16.3.1.3 | ColumnrndFACSType | read-only | mandatory | The Mode of in which this FACS statement operates. |
| 1.3.6.1.4.1.89.16.3.1.4 | ColumnrndFACSIndex | read-only | mandatory | Index to the FACS Table. |
| 1.3.6.1.4.1.89.16.3.1.5 | ColumnrndFACSSrcAdd | read-write | mandatory | The size of the octet string will be according to the protocol type define in rndFACSProtocolType. |
| 1.3.6.1.4.1.89.16.3.1.6 | ColumnrndFACSSrcAddMask | read-write | mandatory | Source-address mask . |
| 1.3.6.1.4.1.89.16.3.1.7 | ColumnrndFACSDesAdd | read-write | mandatory | Destination-address The size of the octet string will be according to the protocol type define in rndFACSProtocolType . |
| 1.3.6.1.4.1.89.16.3.1.8 | ColumnrndFACSDesAddMask | read-write | mandatory | Destination-address mask . |
| 1.3.6.1.4.1.89.16.3.1.9 | ColumnrndFACSOperation | read-write | mandatory | ... . |
| 1.3.6.1.4.1.89.16.3.1.10 | ColumnrndFACSNetFiltering | read-write | mandatory | ... . |
| 1.3.6.1.4.1.89.16.3.1.11 | ColumnrndFACSSoketNum | read-write | mandatory | Port/socket number for different applications 0 is default meaning not applicable. |
| 1.3.6.1.4.1.89.16.3.1.12 | ColumnrndFACSMask1Id | read-write | mandatory | Index into RND mask table FACS/COD Type) . |
| 1.3.6.1.4.1.89.16.3.1.13 | ColumnrndFACSMask2Id | read-write | mandatory | Index into RND mask table FACS/COD according to the value of rndFACSType . |
| 1.3.6.1.4.1.89.16.3.1.14 | ColumnrndFACSStatus | read-write | mandatory | The status of a table entry. |
| 1.3.6.1.4.1.89.17 | NodedeviceTemperatureCritical | Sent whenever the temperature changes to critical | ||
| 1.3.6.1.4.1.89.21 | NodersARPTableIpConflict | Indecate IP Conflicts on ARP table. | ||
| 1.3.6.1.4.1.89.24 | NoderndBootP | |||
| 1.3.6.1.4.1.89.24.1 | ScalarrndBootPServerAddress | read-write | mandatory | The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0. |
| 1.3.6.1.4.1.89.24.2 | ScalarrndBootPRelaySecThreshold | read-write | mandatory | BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first. |
| 1.3.6.1.4.1.89.26 | NodeipSpec | |||
| 1.3.6.1.4.1.89.26.1 | TablersIpAddrTable | not-accessible | mandatory | This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.89.26.1.1 | RowrsIpAddrEntry | not-accessible | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.89.26.1.1.1 | ColumnrsIpAdEntAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.89.26.1.1.2 | ColumnrsIpAdEntIfIndex | read-write | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.89.26.1.1.3 | ColumnrsIpAdEntNetMask | read-write | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.89.26.1.1.4 | ColumnrsIpAdEntForwardIpBroadcast | read-write | mandatory | This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net). |
| 1.3.6.1.4.1.89.26.1.1.5 | ColumnrsIpAdEntReasmMaxSize | read-only | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.89.26.1.1.6 | ColumnrsIpAdEntStatus | read-write | mandatory | The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II). |
| 1.3.6.1.4.1.89.26.1.1.7 | ColumnrsIpAdEntBcastAddr | read-write | mandatory | Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1. |
| 1.3.6.1.4.1.89.26.1.1.8 | ColumnrsIpAdEntVlanTag | read-write | mandatory | The vlan Tag value that represent this ip interface this filed include both vlna tag and vlan priority |
| 1.3.6.1.4.1.89.26.1.1.9 | ColumnrsIpAdEntOneIpMode | read-write | mandatory | the one-ip mode. Relevant only for LinkProof devices. disable - regular interface. Enable - the specific ip can be ip-to-me (to device) and/or forwarding ip |
| 1.3.6.1.4.1.89.26.1.1.10 | ColumnrsIpAdEntType | read-only | mandatory | Ip interface type. The way the ip-interface was set determine its type |
| 1.3.6.1.4.1.89.26.1.1.11 | ColumnrsIpAdEntPeerAddr | read-write | mandatory | IP of same interface on the peer device. |
| 1.3.6.1.4.1.89.26.1.1.12 | ColumnrsIpAdEntPeerAddrStatus | read-write | mandatory | Indicating the relevancy of PeerAddr for this row |
| 1.3.6.1.4.1.89.26.2 | NodeicmpSpec | |||
| 1.3.6.1.4.1.89.26.2.1 | ScalarrsIcmpGenErrMsgEnable | read-write | mandatory | This variable controlls the ability to generate ICMP error messages |
| 1.3.6.1.4.1.89.26.2.2 | TablersIcmpRdTable | not-accessible | mandatory | This table contains ICMP Router Discovery parameters configurated per IP interface. |
| 1.3.6.1.4.1.89.26.2.2.1 | RowrsIcmpRdEntry | not-accessible | mandatory | The ICMP parameters configurated for IP interface. |
| 1.3.6.1.4.1.89.26.2.2.1.1 | ColumnrsIcmpRdIpAddr | read-only | mandatory | The IP address to which this entry's information pertains. |
| 1.3.6.1.4.1.89.26.2.2.1.2 | ColumnrsIcmpRdIpAdvertAddr | read-write | mandatory | The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast ad… |
| 1.3.6.1.4.1.89.26.2.2.1.3 | ColumnrsIcmpRdMaxAdvertInterval | read-write | mandatory | The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 180… |
| 1.3.6.1.4.1.89.26.2.2.1.4 | ColumnrsIcmpRdMinAdvertInterval | read-write | mandatory | The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no grea… |
| 1.3.6.1.4.1.89.26.2.2.1.5 | ColumnrsIcmpRdAdvertLifetime | read-write | mandatory | The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000… |
| 1.3.6.1.4.1.89.26.2.2.1.6 | ColumnrsIcmpRdAdvertise | read-write | mandatory | A flag indicating whether or not the address is to be advertised. |
| 1.3.6.1.4.1.89.26.2.2.1.7 | ColumnrsIcmpRdPreferenceLevel | read-write | mandatory | The preferability of the address as a default router address, relative to other router addresses on the same subnet. |
| 1.3.6.1.4.1.89.26.2.2.1.8 | ColumnrsIcmpRdEntStatus | read-write | mandatory | Setting of any value to this object set values of all fields to the default values. |
| 1.3.6.1.4.1.89.26.3 | Noderip2Spec | |||
| 1.3.6.1.4.1.89.26.3.1 | TablersRip2IfConfTable | not-accessible | mandatory | This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2) |
| 1.3.6.1.4.1.89.26.3.1.1 | RowrsRip2IfConfEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.89.26.3.1.1.1 | ColumnrsRip2IfConfAddress | read-only | mandatory | The IP Address of this system on the indicated subnet. |
| 1.3.6.1.4.1.89.26.3.1.1.2 | ColumnrsRip2IfConfVirtualDis | read-write | mandatory | This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm. |
| 1.3.6.1.4.1.89.26.3.1.1.3 | ColumnrsRip2IfConfAutoSend | read-write | mandatory | This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. O… |
| 1.3.6.1.4.1.89.26.3.2 | TablerdwrRip2IfConfTable | not-accessible | mandatory | A list of subnets which require separate configuration in RIP. This is a combination of rip2IfConfTable and rsRip2IfConfTable. |
| 1.3.6.1.4.1.89.26.3.2.1 | RowrdwrRip2IfConfEntry | not-accessible | mandatory | A Single Routing Domain in a single Subnet. |
| 1.3.6.1.4.1.89.26.3.2.1.1 | ColumnrdwrRip2IfConfAddress | read-only | mandatory | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.4.1.89.26.3.2.1.2 | ColumnrdwrRip2IfConfDomain | read-write | deprecated | Value inserted into the Routing Domain field of all RIP packets sent on this interface. |
| 1.3.6.1.4.1.89.26.3.2.1.3 | ColumnrdwrRip2IfConfAuthType | read-write | mandatory | The type of Authentication used on this interface. |
| 1.3.6.1.4.1.89.26.3.2.1.4 | ColumnrdwrRip2IfConfAuthKey | read-write | mandatory | The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has the value simplePassword word. A modification of t… |
| 1.3.6.1.4.1.89.26.3.2.1.5 | ColumnrdwrRip2IfConfSend | read-write | mandatory | What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates usi… |
| 1.3.6.1.4.1.89.26.3.2.1.6 | ColumnrdwrRip2IfConfReceive | read-write | mandatory | This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets. |
| 1.3.6.1.4.1.89.26.3.2.1.7 | ColumnrdwrRip2IfConfDefaultMetric | read-write | mandatory | This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that n… |
| 1.3.6.1.4.1.89.26.3.2.1.8 | ColumnrdwrRip2IfConfStatus | read-write | mandatory | Writing invalid has the effect of deleting this interface. |
| 1.3.6.1.4.1.89.26.3.2.1.9 | ColumnrdwrRip2IfConfSrcAddress | read-write | mandatory | The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2IfConfAddress. On … |
| 1.3.6.1.4.1.89.26.3.2.1.10 | ColumnrdwrRip2IfConfVirtualDis | read-write | mandatory | This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm. |
| 1.3.6.1.4.1.89.26.3.2.1.11 | ColumnrdwrRip2IfConfAutoSend | read-write | mandatory | This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. O… |
| 1.3.6.1.4.1.89.26.4 | NodearpSpec | |||
| 1.3.6.1.4.1.89.26.4.1 | ScalarrsArpDeleteTable | read-write | mandatory | Setting this object to any not-null value has the effect of deleting all entries of the ARP table. |
| 1.3.6.1.4.1.89.26.4.2 | ScalarrsArpInactiveTimeOut | read-write | mandatory | This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the … |
| 1.3.6.1.4.1.89.26.4.3 | ScalarrsArpProxy | read-write | mandatory | When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router … |
| 1.3.6.1.4.1.89.26.5 | Nodetftp | |||
| 1.3.6.1.4.1.89.26.5.1 | ScalarrsTftpRetryTimeOut | read-write | mandatory | General Retransmission time-out value (seconds) |
| 1.3.6.1.4.1.89.26.5.2 | ScalarrsTftpTotalTimeOut | read-write | mandatory | Total Retransmission time-out value (seconds) |
| 1.3.6.1.4.1.89.26.5.3 | ScalarrsSendConfigFile | read-write | mandatory | The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address. |
| 1.3.6.1.4.1.89.26.5.4 | ScalarrsGetConfigFile | read-write | mandatory | The file name include path where the Router Server will get the configuration. The default source address will be the sender address. |
| 1.3.6.1.4.1.89.26.5.5 | ScalarrsLoadSoftware | read-write | mandatory | The file name include path where the Router Server will get the software. The source address will the sender address. |
| 1.3.6.1.4.1.89.26.5.6 | ScalarrsFileServerAddress | read-write | mandatory | The IP address of the configuration / sw server. |
| 1.3.6.1.4.1.89.26.5.8 | ScalarrsGetConfigFileAppend | read-write | mandatory | The file name include path where the Router Server will get the configuration commands file. The default source address will be the sender address. |
| 1.3.6.1.4.1.89.26.5.9 | ScalarrsGetConfigFileAppendReboot | read-write | mandatory | The file name include path where the Router Server will get the configuration commands file. The default source address will be the sender address. |
| 1.3.6.1.4.1.89.26.5.10 | ScalarrsGetConfigErrorLog | read-write | mandatory | The file name include path where the Router Server will get the configuration. The default source address will be the sender address. |
| 1.3.6.1.4.1.89.26.5.11 | ScalarrsSendConfigFileBer | read-write | mandatory | The file name include path where the device puts the full configuration in BER format. The default destination address will be the sender address. |
| 1.3.6.1.4.1.89.26.5.12 | ScalarrsIncludePrivateKeys | read-write | mandatory | Flags whether the configuration will include private keys. |
| 1.3.6.1.4.1.89.26.5.13 | ScalarrsGetConfigFileType | read-write | mandatory | Type of configuration to be downloaded. |
| 1.3.6.1.4.1.89.26.6 | NodeipRedundancy | |||
| 1.3.6.1.4.1.89.26.6.1 | ScalaripRedundAdminStatus | read-write | mandatory | This variable controls the IP Redundancy method in the device. In case the value is enable, it means the ARP redundancy mechanism is running .If the value is v… |
| 1.3.6.1.4.1.89.26.6.2 | ScalaripRedundOperStatus | read-only | mandatory | obsolete |
| 1.3.6.1.4.1.89.26.6.3 | TableipRedundRoutersTable | not-accessible | mandatory | List of IP addresses backed up by this router. |
| 1.3.6.1.4.1.89.26.6.3.1 | RowipRedundRoutersEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.26.6.3.1.1 | ColumnipRedundRoutersIfAddr | read-only | mandatory | The Ip address of the IP interface on which the redundancy feature is operational. |
| 1.3.6.1.4.1.89.26.6.3.1.2 | ColumnipRedundRoutersMainRouterAddr | read-only | mandatory | The Ip address of the polled main router. |
| 1.3.6.1.4.1.89.26.6.3.1.3 | ColumnipRedundRoutersOperStatus | read-only | mandatory | If active, the main router is considered inoperational and the IP interface operates as its backup. |
| 1.3.6.1.4.1.89.26.6.3.1.4 | ColumnipRedundRoutersPollInterval | read-write | mandatory | Polling interval for this router (in seconds). If 0 the router is not polled. |
| 1.3.6.1.4.1.89.26.6.3.1.5 | ColumnipRedundRoutersTimeout | read-write | mandatory | Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating … |
| 1.3.6.1.4.1.89.26.6.3.1.6 | ColumnipRedundRoutersStatus | read-write | mandatory | Entry status |
| 1.3.6.1.4.1.89.26.6.4 | ScalarrdwrRedunForceDownPorts | read-write | mandatory | the time that the forced ports will be electrically down. The value 0 means that the feature is disabled |
| 1.3.6.1.4.1.89.26.6.5 | TablerdwrRedundancyInfoTable | not-accessible | mandatory | Row holding the device redundancy information. |
| 1.3.6.1.4.1.89.26.6.5.1 | RowrdwrRedundancyInfoEntry | not-accessible | mandatory | Row definition for the table. |
| 1.3.6.1.4.1.89.26.6.5.1.1 | ColumnrdwrRedundancyInfoIdx | read-only | mandatory | The entry index. Starting from 1 |
| 1.3.6.1.4.1.89.26.6.5.1.2 | ColumnrdwrRedundancyInfoInterface | read-only | mandatory | The entry attached interface |
| 1.3.6.1.4.1.89.26.6.5.1.3 | ColumnrdwrRedundancyInfoVRID | read-only | mandatory | Supporting VRRP, the entry indicates the entry VRID |
| 1.3.6.1.4.1.89.26.6.5.1.4 | ColumnrdwrRedundancyInfoMode | read-only | mandatory | This variable indicates the IP Redundancy method in the device |
| 1.3.6.1.4.1.89.26.6.5.1.5 | ColumnrdwrRedundancyInfoMyAddress | read-only | mandatory | The entry indicates the device interfece address |
| 1.3.6.1.4.1.89.26.6.5.1.6 | ColumnrdwrRedundancyInfoNeighborAddress | read-only | mandatory | Acting as backup, the entry indicates the master associated address |
| 1.3.6.1.4.1.89.26.6.5.1.7 | ColumnrdwrRedundancyInfoStatus | read-only | mandatory | The redundancy entry status |
| 1.3.6.1.4.1.89.26.7 | NodeipRouteLeaking | |||
| 1.3.6.1.4.1.89.26.7.1 | ScalaripLeakStaticToRip | read-write | mandatory | This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised int… |
| 1.3.6.1.4.1.89.26.7.2 | ScalaripLeakStaticToOspf | read-write | mandatory | This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised … |
| 1.3.6.1.4.1.89.26.7.3 | ScalaripLeakOspfToRip | read-write | mandatory | This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP. |
| 1.3.6.1.4.1.89.26.7.4 | ScalaripLeakRipToOspf | read-write | mandatory | This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes. |
| 1.3.6.1.4.1.89.26.7.5 | ScalaripLeakExtDirectToOspf | read-write | mandatory | This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on wh… |
| 1.3.6.1.4.1.89.26.7.6 | ScalaripLeakOverrideOSPFLeakonFailure | read-write | mandatory | In case of OSPF: don't advertise the device as next hop router in case all load balanced devices are down. |
| 1.3.6.1.4.1.89.26.7.7 | ScalaripLeakAdvertiseOSPFAccordingtoPortRules | read-write | mandatory | in OPSF: advertise routing according to the port rules |
| 1.3.6.1.4.1.89.26.8 | NodeipRipFilter | |||
| 1.3.6.1.4.1.89.26.8.1 | TablersIpRipFilterGlbTable | not-accessible | mandatory | The table of RIP global filters per IP router. |
| 1.3.6.1.4.1.89.26.8.1.1 | RowrsIpRipFilterGlbEntry | not-accessible | mandatory | An entry in the RIP global filter table |
| 1.3.6.1.4.1.89.26.8.1.1.1 | ColumnrsIpRipFilterGlbType | read-only | mandatory | Type of filter - input/output |
| 1.3.6.1.4.1.89.26.8.1.1.2 | ColumnrsIpRipFilterGlbNumber | read-only | mandatory | Number of RIP filter. |
| 1.3.6.1.4.1.89.26.8.1.1.3 | ColumnrsIpRipFilterGlbStatus | read-write | mandatory | The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. |
| 1.3.6.1.4.1.89.26.8.1.1.4 | ColumnrsIpRipFilterGlbIpAddr | read-write | mandatory | network prefix IP address, as in the forwarding table. |
| 1.3.6.1.4.1.89.26.8.1.1.5 | ColumnrsIpRipFilterGlbNetworkMaskBits | read-write | mandatory | the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 |
| 1.3.6.1.4.1.89.26.8.1.1.6 | ColumnrsIpRipFilterGlbMatchBits | read-write | mandatory | the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 b… |
| 1.3.6.1.4.1.89.26.8.1.1.7 | ColumnrsIpRipFilterGlbAction | read-write | mandatory | Filter action - permit/deny for this network |
| 1.3.6.1.4.1.89.26.8.2 | TablersIpRipFilterLclTable | not-accessible | mandatory | Table of input/output RIP filters used per IP Interface. |
| 1.3.6.1.4.1.89.26.8.2.1 | RowrsIpRipFilterLclEntry | not-accessible | mandatory | An entry in the Intf RIP filter table |
| 1.3.6.1.4.1.89.26.8.2.1.1 | ColumnrsIpRipFilterLclIpIntf | read-only | mandatory | The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr. |
| 1.3.6.1.4.1.89.26.8.2.1.2 | ColumnrsIpRipFilterLclType | read-only | mandatory | Type of filter - input/output |
| 1.3.6.1.4.1.89.26.8.2.1.3 | ColumnrsIpRipFilterLclNumber | read-only | mandatory | Number of RIP filter for this Interface |
| 1.3.6.1.4.1.89.26.8.2.1.4 | ColumnrsIpRipFilterLclStatus | read-write | mandatory | The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. |
| 1.3.6.1.4.1.89.26.8.2.1.5 | ColumnrsIpRipFilterLclIpAddr | read-write | mandatory | network prefix IP address, as in the forwarding table. |
| 1.3.6.1.4.1.89.26.8.2.1.6 | ColumnrsIpRipFilterLclNetworkMaskBits | read-write | mandatory | the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 |
| 1.3.6.1.4.1.89.26.8.2.1.7 | ColumnrsIpRipFilterLclMatchBits | read-write | mandatory | the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 b… |
| 1.3.6.1.4.1.89.26.8.2.1.8 | ColumnrsIpRipFilterLclAction | read-write | mandatory | Filter action - permit/deny |
| 1.3.6.1.4.1.89.26.9 | ScalarrsRipEnable | read-write | mandatory | Enables or disables RIP. |
| 1.3.6.1.4.1.89.26.10 | ScalarlreBoxAgentIP | read-write | mandatory | |
| 1.3.6.1.4.1.89.26.11 | TableipIfTable | not-accessible | mandatory | This table is parralel to IPv6 MIB (RFC4293) ipIfTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.89.26.11.1 | RowipIfEntry | not-accessible | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.89.26.11.1.1 | ColumnipIfAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.89.26.11.1.2 | ColumnipIfPrefix | read-write | mandatory | The IP address's prefix. |
| 1.3.6.1.4.1.89.26.11.1.3 | ColumnipIfIndex | read-write | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.89.26.11.1.4 | ColumnipIfFwdBroadcast | read-write | mandatory | This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net). |
| 1.3.6.1.4.1.89.26.11.1.5 | ColumnipIfBcastAddr | read-write | mandatory | Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1. |
| 1.3.6.1.4.1.89.26.11.1.6 | ColumnipIfVlanTag | read-write | mandatory | The vlan Tag value that represent this ip interface this filed include both vlna tag and vlan priority |
| 1.3.6.1.4.1.89.26.11.1.7 | ColumnipIfLabel | read-write | mandatory | User textual dscription of the ip interface. |
| 1.3.6.1.4.1.89.26.11.1.8 | ColumnipIfEntryStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.26.11.1.9 | ColumnipIfBackupAddr | read-write | mandatory | The ip address of the peer address. It is used by CDE and High Availability. |
| 1.3.6.1.4.1.89.26.12 | TableipSpecRouteTable | not-accessible | mandatory | This entity's IP Routing table. |
| 1.3.6.1.4.1.89.26.12.1 | RowipSpecRouteEntry | not-accessible | mandatory | A particular route to a particular destination, under a particular policy (as reflected in the ipSpecRoutePolicy object). Dynamically created rows will survive… |
| 1.3.6.1.4.1.89.26.12.1.1 | ColumnipSpecRouteDest | read-write | mandatory | The destination IP address of this route. The values for the index objects ipSpecRouteDest and ipSpecRoutePfxLen must be consistent. When the value of ipSpecRo… |
| 1.3.6.1.4.1.89.26.12.1.2 | ColumnipSpecRoutePfxLen | read-write | mandatory | The prefix length. For IPv4 must be <=32, for IPv6 <= 128. The values for the index objects ipSpecRouteDest and ipSpecRoutePfxLen must be consistent. For IPv4 … |
| 1.3.6.1.4.1.89.26.12.1.3 | ColumnipSpecRouteNextHop | read-write | mandatory | On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of … |
| 1.3.6.1.4.1.89.26.12.1.4 | ColumnipSpecRouteMetric | read-write | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipSpecRouteProto value… |
| 1.3.6.1.4.1.89.26.12.1.5 | ColumnipSpecRoutePort | read-only | mandatory | The Port value that identifies the local port/interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.89.26.12.1.6 | ColumnipSpecRouteLabel | read-only | mandatory | User defined data. |
| 1.3.6.1.4.1.89.26.12.1.7 | ColumnipSpecRouteStatus | read-write | mandatory | The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). |
| 1.3.6.1.4.1.89.26.13 | Tableip6NetToMediaTable | not-accessible | mandatory | This entity's ND table. |
| 1.3.6.1.4.1.89.26.13.1 | Rowip6NetToMediaEntry | not-accessible | mandatory | The addressing information for one of this entity's ND addresses. |
| 1.3.6.1.4.1.89.26.13.1.1 | Columnip6NetToMediaIfIndex | read-write | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.89.26.13.1.2 | Columnip6NetToMediaPhysAddress | read-write | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.4.1.89.26.13.1.3 | Columnip6NetToMediaNetAddress | read-write | mandatory | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.4.1.89.26.13.1.4 | Columnip6NetToMediaType | read-write | mandatory | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e… |
| 1.3.6.1.4.1.89.26.14 | NodendSpec | |||
| 1.3.6.1.4.1.89.26.14.1 | ScalarrsNetNdInactiveTimeOut | read-write | mandatory | This variable defines the maximum time period (in second) that can pass between Neighbor-discovery requests concerning an entry in the Neighbor-discovery table… |
| 1.3.6.1.4.1.89.27 | NodevirtualLan | |||
| 1.3.6.1.4.1.89.27.1 | TablevirtualLanTable | not-accessible | mandatory | An entry of this table specifies an new ifIndex with a type of propVirtual(53). |
| 1.3.6.1.4.1.89.27.1.1 | RowvirtualLanEntry | not-accessible | mandatory | A list of information for each virtual LAN. |
| 1.3.6.1.4.1.89.27.1.1.1 | ColumnvlIfIndex | read-write | mandatory | An logical interface number, corresponded this VL |
| 1.3.6.1.4.1.89.27.1.1.2 | ColumnvlProto | read-write | mandatory | The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols.… |
| 1.3.6.1.4.1.89.27.1.1.3 | ColumnvlAutoConfigEnable | read-write | mandatory | It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from… |
| 1.3.6.1.4.1.89.27.1.1.4 | ColumnvlStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.27.1.1.5 | ColumnvlType | read-write | mandatory | regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's … |
| 1.3.6.1.4.1.89.27.2 | TablevirtualLanPortsTable | not-accessible | mandatory | For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains. |
| 1.3.6.1.4.1.89.27.2.1 | RowvirtualLanPortEntry | not-accessible | mandatory | A entry of this table specifies a VL and a port belonging to it |
| 1.3.6.1.4.1.89.27.2.1.1 | ColumnvLIfIndex | read-write | mandatory | An logical interface number, corresponding to this VL |
| 1.3.6.1.4.1.89.27.2.1.2 | ColumnvLPortIfIndex | read-write | mandatory | A physical port belonging to the VL specified by vlIfIndex. |
| 1.3.6.1.4.1.89.27.2.1.3 | ColumnvLPortType | read-only | mandatory | static means configured by user dynamic means autoconfigured by the RS |
| 1.3.6.1.4.1.89.27.2.1.4 | ColumnvLPortStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.27.3 | TablevirtualLanAutoConfTable | not-accessible | mandatory | This table specifies per a routing protocol a set of ports, from which RS will automatically learning VL in accordance with rules, defined by the protocol. |
| 1.3.6.1.4.1.89.27.3.1 | RowvirtualLanAutoConfEntry | not-accessible | mandatory | One port, specified by vlAutoConfPortIfIndex, for which the RS will automatically learn its VL in accordance with rules, defined by the protocol specified in v… |
| 1.3.6.1.4.1.89.27.3.1.1 | ColumnvlAutoConfPortIfIndex | read-write | mandatory | Port on which the autoconfig option should be supported |
| 1.3.6.1.4.1.89.27.3.1.2 | ColumnvlAutoConfProto | read-only | mandatory | Protocol for which the autoconfig option is supported for the port specified by vlAutoConfPortIfIndex |
| 1.3.6.1.4.1.89.27.3.1.3 | ColumnvlAutoConfStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.27.4 | ScalarvirtualLanAutoConfAgingTimeout | read-write | mandatory | The units of this MIB object is seconds. Its value can be either 0 or in range 10..65535 . |
| 1.3.6.1.4.1.89.27.5 | NodevirtualLanProtocolVlan | |||
| 1.3.6.1.4.1.89.27.5.1 | ScalarvirtualLanUserEtherType | read-write | mandatory | |
| 1.3.6.1.4.1.89.27.5.2 | ScalarvirtualLanUserMask | read-write | mandatory | |
| 1.3.6.1.4.1.89.28 | NodersConf | |||
| 1.3.6.1.4.1.89.28.1 | TablersIfConfTable | not-accessible | mandatory | This table enable the user to add interface to the RS. RS will automatically add the new interface to the interface Table |
| 1.3.6.1.4.1.89.28.1.1 | RowrsIfConfEntry | not-accessible | mandatory | Each entry defines a configured interface. |
| 1.3.6.1.4.1.89.28.1.1.1 | ColumnrsIfConfIndex | read-only | mandatory | This variable uniquely identifies the interface. It is used as a cross reference in other system tables |
| 1.3.6.1.4.1.89.28.1.1.2 | ColumnrsIfConfType | read-write | mandatory | This variable identifies the type of the specific entry in the rsIfConfTable. This field is writable only at creation time (i.e., when value of status is under… |
| 1.3.6.1.4.1.89.28.1.1.3 | ColumnrsIfConfName | read-write | mandatory | This variable provides a logical name to a specific entry in rsIfConfTable |
| 1.3.6.1.4.1.89.28.1.1.4 | ColumnrsIfConfStatus | read-write | mandatory | The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row i… |
| 1.3.6.1.4.1.89.29 | NodersTunning | |||
| 1.3.6.1.4.1.89.29.1 | ScalarrsHighPriority | read-write | mandatory | This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode. |
| 1.3.6.1.4.1.89.29.2 | ScalarrsLowPriority | read-write | mandatory | This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode. |
| 1.3.6.1.4.1.89.29.3 | ScalarrsDbgLevel | read-write | mandatory | This variable indicates the debug level the Router Server works. the range of this variable is 1..100 |
| 1.3.6.1.4.1.89.29.4 | ScalarrsDiagnostic | read-only | mandatory | This variable will contain some dignostic information in case on a problem ocurs in the RS functinality. |
| 1.3.6.1.4.1.89.29.5 | ScalarrsConfirmMessagTab | read-write | mandatory | This variable enables the operator to confirm all the message in the event Message Table. |
| 1.3.6.1.4.1.89.29.6 | TableeventMessageTable | not-accessible | mandatory | The Event Message table of the agent |
| 1.3.6.1.4.1.89.29.6.1 | RoweventMessageEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.6.1.1 | ColumneventNum | read-only | mandatory | The event number,the index of this table. |
| 1.3.6.1.4.1.89.29.6.1.2 | ColumneventDesc | read-only | mandatory | The event discription, this text will include time and severity. |
| 1.3.6.1.4.1.89.29.7 | NodereaTunning | |||
| 1.3.6.1.4.1.89.29.7.1 | ScalarreaIpRemoteAgingTime | read-write | mandatory | This variable specifies aging time used by the REA for remote entries in the Ip Fast Forwarding Table. |
| 1.3.6.1.4.1.89.29.7.2 | ScalarreaFftHashMaxChain | read-write | mandatory | This variable specifies the maximum length of hash chains in the Fast Forwarding Tables. |
| 1.3.6.1.4.1.89.29.7.3 | ScalarreaMltcstBitOn | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.4 | ScalarreaIpForwardEnable | read-write | mandatory | The Platform will perform fast IP forwarding if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.5 | ScalarreaIpxForwardEnable | read-write | mandatory | The Platform will perform fast IPX forwarding if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.6 | ScalarreaBridgeEnable | read-write | mandatory | The Platform will perform bridging if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.7 | ScalarreaFacsEnable | read-write | mandatory | The RS and Platform will perform FASC if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.8 | ScalarreaIpForwardDatagrams | read-only | mandatory | The number of IP datagrams have been forwarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.9 | ScalarreaIpInDiscards | read-only | mandatory | The number of IP datagrams have been dicarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.10 | ScalarreaIpxForwardDatagrams | read-only | mandatory | The number of IPX datagrams have been forwarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.11 | ScalarreaIpxInDiscards | read-only | mandatory | The number of IP datagrams have been dicarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.12 | TablereaBridgeFftTable | not-accessible | mandatory | The Bridge Fast Forwarding Table |
| 1.3.6.1.4.1.89.29.7.12.1 | RowreaBridgeFftEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.7.12.1.1 | ColumnreaBrgFftEntryNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.2 | ColumnreaBrgFftMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.3 | ColumnreaBrgFftReNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.4 | ColumnreaBrgFftPortNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.5 | ColumnreaBrgFftFacsSrcIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.6 | ColumnreaBrgFftFacsDstIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.13 | ScalarreaBrgDiscards | read-only | mandatory | The number of bridging datagrams have been discarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.14 | ScalarreaBrgForwards | read-only | mandatory | The number of bridging datagrams have been forwarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.15 | TablereaIpFftTable | not-accessible | mandatory | The IP Fast Forwarding Table |
| 1.3.6.1.4.1.89.29.7.15.1 | RowreaIpFftEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.7.15.1.1 | ColumnreaIpFftEntryNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.2 | ColumnreaIpFftDstIpAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.3 | ColumnreaIpFftDstIpMask | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.4 | ColumnreaIpFftRangeType | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.5 | ColumnreaIpFftSrcMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.6 | ColumnreaIpFftDstMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.7 | ColumnreaIpFftReNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.8 | ColumnreaIpFftPortNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.9 | ColumnreaIpFftFacsSrcIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.10 | ColumnreaIpFftFacsDstIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.11 | ColumnreaIpFftApplFlags | read-only | mandatory | A bit mask that defines the applications associated with this entry: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654… |
| 1.3.6.1.4.1.89.29.7.16 | TablereaIpxFftTable | not-accessible | mandatory | The IPX Fast Forwarding Table |
| 1.3.6.1.4.1.89.29.7.16.1 | RowreaIpxFftEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.7.16.1.1 | ColumnreaIpxFftEntryNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.2 | ColumnreaIpxFftDstNetid | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.3 | ColumnreaIpxFftRangeType | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.4 | ColumnreaIpxFftSrcMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.5 | ColumnreaIpxFftDstMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.6 | ColumnreaIpxFftReNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.7 | ColumnreaIpxFftPortNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.8 | ColumnreaIpxFftFacsSrcIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.9 | ColumnreaIpxFftFacsDstIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.17 | TablelreVnResposibilityTable | not-accessible | mandatory | The Bridge Responsibility Table |
| 1.3.6.1.4.1.89.29.7.17.1 | RowlreVnResposibilityEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.7.17.1.1 | ColumnlreVnRespVn | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.17.1.2 | ColumnlreVnRespStatus | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.18 | ScalarreaSrcViolationEnable | read-write | mandatory | The Platform will perform the Source Port Violation Procedure if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.19 | ScalarreaSrcViolationTrapEnable | read-write | mandatory | The RS will send the Source Port Violation TRAP messages if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.20 | ScalarreaSrcAddrValidationEnable | read-write | mandatory | The Platform will verify the source address of incoming IP datagram. |
| 1.3.6.1.4.1.89.29.7.21 | ScalarreaRsQueueDiscards | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.22 | ScalarreaBufFree | read-only | mandatory | The number of free buffers. |
| 1.3.6.1.4.1.89.29.7.23 | ScalarlreResetDstMacBit46 | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.24 | ScalarlreQueSourceSelect | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.25 | ScalarlreResetDstMacBit47 | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.8 | NodersMaxEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.1 | NodersMaxBridgeForwardingEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.1.1 | ScalarrsMaxBrgFrwEntries | read-only | mandatory | Maximal number of entries in bridge forwarding table. |
| 1.3.6.1.4.1.89.29.8.1.2 | ScalarrsMaxBrgFrwEntriesAfterReset | read-write | mandatory | Future maximal number of entries in bridge forwarding table. |
| 1.3.6.1.4.1.89.29.8.2 | NodersMaxIpForwardingEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.2.1 | ScalarrsMaxIpFrwEntries | read-only | mandatory | Maximal number of entries in Ip forwarding table. |
| 1.3.6.1.4.1.89.29.8.2.2 | ScalarrsMaxIpFrwEntriesAfterReset | read-write | mandatory | Future maximal number of entries in Ip forwarding table. |
| 1.3.6.1.4.1.89.29.8.3 | NodersMaxArpEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.3.1 | ScalarrsMaxArpEntries | read-only | mandatory | Maximal number of entries in Arp forwarding table. |
| 1.3.6.1.4.1.89.29.8.3.2 | ScalarrsMaxArpEntriesAfterReset | read-write | mandatory | Future maximal number of entries in Arp forwarding table. |
| 1.3.6.1.4.1.89.29.8.4 | NodersMaxIpxForwardingEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.4.1 | ScalarrsMaxIpxFrwEntries | read-only | mandatory | Maximal number of entries in Ipx forwarding table. |
| 1.3.6.1.4.1.89.29.8.4.2 | ScalarrsMaxIpxFrwEntriesAfterReset | read-write | mandatory | Future maximal number of entries in Ipx forwarding table. |
| 1.3.6.1.4.1.89.29.8.5 | NodersMaxIpxSapEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.5.1 | ScalarrsMaxIpxSapEntries | read-only | mandatory | Maximal number of entries in IpxSap table. |
| 1.3.6.1.4.1.89.29.8.5.2 | ScalarrsMaxIpxSapEntriesAfterReset | read-write | mandatory | Future maximal number of entries in IpxSap table. |
| 1.3.6.1.4.1.89.29.8.6 | NodersMaxDspClntEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.6.1 | ScalarrsMaxDspClntEntries | read-only | mandatory | Maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.89.29.8.6.2 | ScalarrsMaxDspClntEntriesAfterReset | read-write | mandatory | Future maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.89.29.8.7 | NodersMaxZeroHopRoutEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.7.1 | ScalarrsMaxZhrConns | read-only | mandatory | The current maximal number of direct Zero-hop routing connections. |
| 1.3.6.1.4.1.89.29.8.7.2 | ScalarrsMaxZhrConnsAfterReset | read-write | mandatory | The future (after reset) maximal number of direct Zero-hop routing connections. |
| 1.3.6.1.4.1.89.29.8.8 | NodersMaxDspFrmEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.8.1 | ScalarrsMaxDspFrmEntries | read-only | mandatory | Maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.89.29.8.8.2 | ScalarrsMaxDspFrmEntriesAfterReset | read-write | mandatory | Future maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.89.29.8.9 | NodersMaxRoutingEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.9.1 | ScalarrsMaxRoutingEntries | read-only | mandatory | Maximal number of entries in the routing table. |
| 1.3.6.1.4.1.89.29.8.9.2 | ScalarrsMaxRoutingEntriesAfterReset | read-write | mandatory | Future maximal number of entries in the routing table. |
| 1.3.6.1.4.1.89.29.8.10 | NodersMaxRadiusEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.10.1 | ScalarrsMaxRadiusUsersEntries | read-only | mandatory | Maximal number of entries in the radius users table. |
| 1.3.6.1.4.1.89.29.8.10.2 | ScalarrsMaxRadiusUsersEntriesAfterReset | read-write | mandatory | Future maximal number of entries in the radius users table. |
| 1.3.6.1.4.1.89.29.8.10.3 | ScalarrsMaxRadiusNasAuthEntries | read-only | mandatory | Maximal number of entries in the NAS Authenticators table. |
| 1.3.6.1.4.1.89.29.8.10.4 | ScalarrsMaxRadiusNasAuthEntriesAfterReset | read-write | mandatory | Future maximal number of entries in the NAS Authenticators table. |
| 1.3.6.1.4.1.89.29.9 | ScalarrsTuneCheckMemory | read-only | mandatory | Shows whether the requested number of entries in the after-reset tuning variables can be successfully allocated. |
| 1.3.6.1.4.1.89.29.10 | ScalarrsTuneLastCheckResult | read-only | mandatory | Number of Kbytes missing in request for new table sizes. |
| 1.3.6.1.4.1.89.30 | NodestpSpec | |||
| 1.3.6.1.4.1.89.30.1 | ScalarrsStpMode | read-write | mandatory | Default STP Mode. |
| 1.3.6.1.4.1.89.30.1 | NodersStpPortStateTrap | This trap is sent to inform the user of silent link failure or physical port state change, initiated by STP. | ||
| 1.3.6.1.4.1.89.30.2 | ScalarrsStpDefaultBridgePriority | read-write | mandatory | Default STP priority for this bridge. |
| 1.3.6.1.4.1.89.30.3 | ScalarrsStpDefaultHelloTime | read-write | mandatory | Default STP hello time (Sec). |
| 1.3.6.1.4.1.89.30.4 | ScalarrsStpDefaultMaxAgingTime | read-write | mandatory | Default STP hello time (Sec). |
| 1.3.6.1.4.1.89.30.5 | ScalarrsStpDefaultForwardDelayTime | read-write | mandatory | Default STP hello time (Sec). |
| 1.3.6.1.4.1.89.30.6 | ScalarrsStpDefaultPortPriority | read-write | mandatory | Default Port Priority. |
| 1.3.6.1.4.1.89.30.7 | TablersStpInstancesTable | not-accessible | mandatory | A table holding STP instances running on device |
| 1.3.6.1.4.1.89.30.7.1 | RowrsStpInstanceEntry | not-accessible | mandatory | An entry in the STP instances table |
| 1.3.6.1.4.1.89.30.7.1.1 | ColumnrsStpInstanceVlanId | read-only | mandatory | Vlan of STP instance. |
| 1.3.6.1.4.1.89.30.7.1.2 | ColumnrsStpInstanceBridgePriority | read-write | mandatory | Current bridge priority. |
| 1.3.6.1.4.1.89.30.7.1.3 | ColumnrsStpInstanceHelloTime | read-write | mandatory | Hello Time (in seconds). |
| 1.3.6.1.4.1.89.30.7.1.4 | ColumnrsStpInstanceMaxAgingTime | read-write | mandatory | Max Aging Time (in seconds). |
| 1.3.6.1.4.1.89.30.7.1.5 | ColumnrsStpInstanceForwardDelayTime | read-write | mandatory | Forward Delay Time (in seconds). |
| 1.3.6.1.4.1.89.30.7.1.6 | ColumnrsStpInstanceEnabled | read-write | mandatory | Whether this STP instance is enabled |
| 1.3.6.1.4.1.89.30.7.1.7 | ColumnrsStpInstanceRootId | read-only | mandatory | Spanning Tree Root Id. |
| 1.3.6.1.4.1.89.30.7.1.8 | ColumnrsStpInstanceRootPathCost | read-only | mandatory | Spanning Tree Root Path Cost. |
| 1.3.6.1.4.1.89.30.7.1.9 | ColumnrsStpInstanceDesignatedBridgeId | read-only | mandatory | Designated Bridge Id. |
| 1.3.6.1.4.1.89.30.7.1.10 | ColumnrsStpInstanceDesignatedPortId | read-only | mandatory | Designated Port Id. |
| 1.3.6.1.4.1.89.30.8 | TablersStpPortTable | not-accessible | mandatory | A table holding STP Information and instance mapping for each port |
| 1.3.6.1.4.1.89.30.8.1 | RowrsStpPortEntry | not-accessible | mandatory | An entry in the STP ports table |
| 1.3.6.1.4.1.89.30.8.1.1 | ColumnrsStpPortId | read-only | mandatory | Port Id. |
| 1.3.6.1.4.1.89.30.8.1.2 | ColumnrsStpPortVlanId | read-only | mandatory | Vlan this port belongs to. |
| 1.3.6.1.4.1.89.30.8.1.3 | ColumnrsStpPortPriority | read-write | mandatory | STP Priority for this port. |
| 1.3.6.1.4.1.89.30.8.1.4 | ColumnrsStpPortPathCost | read-write | mandatory | Port Path Cost. |
| 1.3.6.1.4.1.89.30.8.1.5 | ColumnrsStpPortModeFast | read-write | mandatory | Whether this port is an Edge port, and should start forwarding immediately. |
| 1.3.6.1.4.1.89.30.8.1.6 | ColumnrsStpPortEnabled | read-write | mandatory | Whether this port participates in spanning tree |
| 1.3.6.1.4.1.89.30.8.1.7 | ColumnrsStpPortState | read-only | mandatory | Port State according to STP Algorithm. |
| 1.3.6.1.4.1.89.30.8.1.8 | ColumnrsStpPortRole | read-only | mandatory | Port Role according to STP Algorithm. |
| 1.3.6.1.4.1.89.35 | NoderndApplications | |||
| 1.3.6.1.4.1.89.35.1 | NodersServerDispatcher | |||
| 1.3.6.1.4.1.89.35.1.1 | NodersWSDConnectionLimitReached | This warning is generated when the users connection limit of an application or a physical server is reached. | ||
| 1.3.6.1.4.1.89.35.1.2 | NodersWSDReadyForShutDown | This warning is generated when all the clients sessions of an application or a physical server are finished and so, the application or server are ready to be s… | ||
| 1.3.6.1.4.1.89.35.1.3 | NodersWSDIllegalReport | This warning is generated when an LRP message arrives with illegal information. | ||
| 1.3.6.1.4.1.89.35.1.4 | NodersWSDRemoteWSDUnavailable | This warning is generated when a remote WSD is in full capacity, not in service or disabled. This server is then unavailable | ||
| 1.3.6.1.4.1.89.35.1.5 | NodersWSDCapacityLimitReached | This warning is generated when WSD capacity limit is reached. | ||
| 1.3.6.1.4.1.89.35.1.6 | NodersWSDStatusMonitoring | This warning is generated for unavailable SNMP parameter from a server. | ||
| 1.3.6.1.4.1.89.35.1.7 | NodersWSDWrongPassword | This warning is generated when authentication failed because of wrong user name or password. | ||
| 1.3.6.1.4.1.89.35.1.8 | NodersWSDInternalTableOverflow | This warning is generated when there are no more free entries in the table. | ||
| 1.3.6.1.4.1.89.35.1.9 | NodersWSDServerUp | This informational trap is sent when a server correctly responds to a connectivity check for the first time. | ||
| 1.3.6.1.4.1.89.35.1.10 | NodersWSDPoliciesUpdated | This informational trap is sent when the rule policies are updated. | ||
| 1.3.6.1.4.1.89.35.1.11 | NodersWSDIntrusionDetected | This informational trap is sent when an intrusion is detected. | ||
| 1.3.6.1.4.1.89.35.1.12 | TablersWSDServerStatTable | not-accessible | mandatory | In this table the WSD collects statistics per servers. |
| 1.3.6.1.4.1.89.35.1.12 | NodersWSDUserLocked | This warning trap is sent when a user is locked from managing the device because of login failure. | ||
| 1.3.6.1.4.1.89.35.1.12.1 | RowrsWSDServerStatEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.12.1.1 | ColumnrsWSDSerStatName | read-only | mandatory | This variable indicate the name assigned by the user to the serve. |
| 1.3.6.1.4.1.89.35.1.12.1.2 | ColumnrsWSDSerStatAttUsersNum | read-only | mandatory | The total number of currently active users attached to this server. |
| 1.3.6.1.4.1.89.35.1.12.1.3 | ColumnrsWSDSerStatPeakLoad | read-only | mandatory | Maximal number of frames per second dispatched to server since last reset. |
| 1.3.6.1.4.1.89.35.1.12.1.4 | ColumnrsWSDSerStatFramesRate | read-only | mandatory | Number of frames per second dispatched to server. |
| 1.3.6.1.4.1.89.35.1.12.1.5 | ColumnrsWSDSerStatFramesLoad | read-only | mandatory | Number of frames per second dispatched to server. |
| 1.3.6.1.4.1.89.35.1.12.1.6 | ColumnrsWSDSerStatRecoveryTime | read-write | mandatory | Number of seconds after server initialization during which ISD won't send any requests. |
| 1.3.6.1.4.1.89.35.1.12.1.7 | ColumnrsWSDSerStatWarmUpTime | read-write | mandatory | Number of seconds after server recovery during which the server will get less requests than permitted by his weight and load. |
| 1.3.6.1.4.1.89.35.1.12.1.8 | ColumnrsWSDSerStatConnectionLimit | read-write | mandatory | The maximal number of client sessions which can be opened on this sever. |
| 1.3.6.1.4.1.89.35.1.12.1.9 | ColumnrsWSDSerStatAdminStatus | read-write | mandatory | Administrative status of physical server. enable - activates the server. The rsADServerOperStatus will change to active. connectionsShutdown - gracefully shuts… |
| 1.3.6.1.4.1.89.35.1.12.1.10 | ColumnrsWSDSerStatConnectionLimitReached | read-only | mandatory | Connection limit reached flag. |
| 1.3.6.1.4.1.89.35.1.13 | NodersWSDAuthenticationSuccess | This informational trap is sent when a user authentication succeeded. | ||
| 1.3.6.1.4.1.89.35.1.14 | NodersRadwareNTPUpdateProblem | This warning trap is sent when the device NTP client encounters problem updating the system clock. | ||
| 1.3.6.1.4.1.89.35.1.15 | NodersRadwareVrrpErrors | This warning trap is generated when VRRP error occurs. | ||
| 1.3.6.1.4.1.89.35.1.16 | NoderdwrDualPowerSupplyProblem | This warning trap is sent when a power supply becomes inacive on a dual power supply device. | ||
| 1.3.6.1.4.1.89.35.1.16 | TablewsdRedundTable | not-accessible | mandatory | List of Farm IP addresses backed up by this router. |
| 1.3.6.1.4.1.89.35.1.16.1 | RowwsdRedundEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.16.1.1 | ColumnwsdRedundFarmAddr | read-only | mandatory | The Farm Virtual Ip address on which the redundancy feature operates. |
| 1.3.6.1.4.1.89.35.1.16.1.2 | ColumnwsdRedundMainWsdAddr | read-only | mandatory | The Ip address of the polled main wsd. |
| 1.3.6.1.4.1.89.35.1.16.1.3 | ColumnwsdRedundOperStatus | read-only | mandatory | If active, the main wsd is considered inactive and the IP interface operates as its backup. |
| 1.3.6.1.4.1.89.35.1.16.1.4 | ColumnwsdRedundPollInterval | read-write | mandatory | Polling interval for the main wsd (in seconds). If 0 the wsd is not polled. |
| 1.3.6.1.4.1.89.35.1.16.1.5 | ColumnwsdRedundTimeout | read-write | mandatory | Interval in seconds during which the backed-up wsd must signal. If it does not signal, it is considered inactive and the IP interface starts operating as backu… |
| 1.3.6.1.4.1.89.35.1.16.1.6 | ColumnwsdRedundStatus | read-write | mandatory | Entry status |
| 1.3.6.1.4.1.89.35.1.17 | NoderdwrDualPowerSupplyUp | This info trap is sent when a power supply changes state from inactive to active on a dual power supply device. | ||
| 1.3.6.1.4.1.89.35.1.18 | NoderdwrMngmntPortDisabled | This info trap is sent when a user tries to access a management port via a protocol, which is disabled on this port. | ||
| 1.3.6.1.4.1.89.35.1.19 | NoderdwrUnauthorizedSourceIP | This info trap is sent when a user tries to access a management port from an IP address, that is not authorized to perform access. | ||
| 1.3.6.1.4.1.89.35.1.19 | ScalarrsWSDNewEntryOnSourcePort | read-write | mandatory | Check source port and if different open new client entry. |
| 1.3.6.1.4.1.89.35.1.20 | NodersSSLCertificateSyncProblem | This trap is issued when a file is removed from certificate directory causing a synchronization problem with certificate table. | ||
| 1.3.6.1.4.1.89.35.1.20 | ScalarrsWSDSelectServerOnSourcePort | read-write | mandatory | Check source port and if different select a new server. |
| 1.3.6.1.4.1.89.35.1.21 | ScalarrsWSDRedundancyMode | read-write | mandatory | Defines whether interface grouping functionality is enabled on the device. |
| 1.3.6.1.4.1.89.35.1.22 | ScalarrsNsdMode | read-write | mandatory | The Topology chosen for the NSD. Slow mode keeps the servers behind the NSD. Fast mode uses retargeting to connect clients directly to servers. |
| 1.3.6.1.4.1.89.35.1.23 | ScalarrsNsdWINSAddr | read-write | mandatory | NetBIOS Name Server IP Address. |
| 1.3.6.1.4.1.89.35.1.24 | NodersIpInterfaceWithTplErase | Indicate that IP Interface associated with throughput license was erased. | ||
| 1.3.6.1.4.1.89.35.1.26 | ScalarrsWSDSyslogStatus | read-write | mandatory | Enable/Disable syslog message sending to remote station. |
| 1.3.6.1.4.1.89.35.1.27 | ScalarrsWSDSyslogAddress | read-write | mandatory | The IP Address of the syslog station. |
| 1.3.6.1.4.1.89.35.1.28 | TablersWSDNTCheckTable | not-accessible | mandatory | In this table the WSD collects NT statistics per servers. |
| 1.3.6.1.4.1.89.35.1.28.1 | RowrsWSDNTCheckEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.28.1.1 | ColumnrsWSDNTSerialNum | read-only | mandatory | The serial number of the algorithm. |
| 1.3.6.1.4.1.89.35.1.28.1.2 | ColumnrsWSDNTFrequentCheckPeriod | read-write | mandatory | The period for getting the frequent NT variables. |
| 1.3.6.1.4.1.89.35.1.28.1.3 | ColumnrsWSDNTOpenSessionsWeight | read-write | mandatory | The weight for currently open sessions consideration. |
| 1.3.6.1.4.1.89.35.1.28.1.4 | ColumnrsWSDNTIncomingTrafficWeight | read-write | mandatory | The weight for incoming traffic consideration. |
| 1.3.6.1.4.1.89.35.1.28.1.5 | ColumnrsWSDNTOutgoingTrafficWeight | read-write | mandatory | The weight for outgoing traffic consideration. |
| 1.3.6.1.4.1.89.35.1.28.1.6 | ColumnrsWSDNTRegularCheckPeriod | read-write | mandatory | The period for getting the regular NT variables. |
| 1.3.6.1.4.1.89.35.1.28.1.7 | ColumnrsWSDNTAvResponseWeight | read-write | mandatory | The weight for average response time. |
| 1.3.6.1.4.1.89.35.1.28.1.8 | ColumnrsWSDNTUsersLimitWeight | read-write | mandatory | The weight for the users limit on the server. |
| 1.3.6.1.4.1.89.35.1.28.1.9 | ColumnrsWSDNTTCPLimitWeight | read-write | mandatory | The weight for the TCP connections limit on the server. |
| 1.3.6.1.4.1.89.35.1.28.1.10 | ColumnrsWSDNTRetries | read-write | mandatory | The number of retries before issuing a trap. |
| 1.3.6.1.4.1.89.35.1.28.1.11 | ColumnrsWSDNTCommunity | read-write | mandatory | The SNMP community name with which we access the servers. |
| 1.3.6.1.4.1.89.35.1.29 | TablersWSDPrivateCheckTable | not-accessible | mandatory | In this table the WSD collects private statistics per server. |
| 1.3.6.1.4.1.89.35.1.29.1 | RowrsWSDPrivateCheckEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.29.1.1 | ColumnrsWSDPrivateSerialNum | read-only | mandatory | The serial number of the algorithm. |
| 1.3.6.1.4.1.89.35.1.29.1.2 | ColumnrsWSDPrivateSpecialCheckPeriod | read-write | mandatory | The period for getting the private variables. |
| 1.3.6.1.4.1.89.35.1.29.1.3 | ColumnrsWSDPrivateExtraVar1ID | read-write | mandatory | This MIB variable will be retrieved from the server. |
| 1.3.6.1.4.1.89.35.1.29.1.4 | ColumnrsWSDPrivateExtraVar1Weight | read-write | mandatory | The weight for variable number 1. |
| 1.3.6.1.4.1.89.35.1.29.1.5 | ColumnrsWSDPrivateExtraVar2ID | read-write | mandatory | This MIB variable will be retrieved from the server. |
| 1.3.6.1.4.1.89.35.1.29.1.6 | ColumnrsWSDPrivateExtraVar2Weight | read-write | mandatory | The weight for variable number 2. |
| 1.3.6.1.4.1.89.35.1.29.1.7 | ColumnrsWSDPrivateRetries | read-write | mandatory | The number of retries before issuing a trap. |
| 1.3.6.1.4.1.89.35.1.29.1.8 | ColumnrsWSDPrivateCommunity | read-write | mandatory | The SNMP community name with which we access the servers. |
| 1.3.6.1.4.1.89.35.1.29.1.9 | ColumnrsWSDPrivateExtraVar1Mode | read-write | mandatory | Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU u… |
| 1.3.6.1.4.1.89.35.1.29.1.10 | ColumnrsWSDPrivateExtraVar2Mode | read-write | mandatory | Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU u… |
| 1.3.6.1.4.1.89.35.1.31 | ScalarrsWSDDNSResolution | read-write | mandatory | Enable/Disable DNS resolution for Farm Addresses. In proximity mode, the WSD will give the best proximity address for the farm. |
| 1.3.6.1.4.1.89.35.1.33 | ScalarrsWSDUserPassword | read-write | mandatory | Software download user provided password. |
| 1.3.6.1.4.1.89.35.1.34 | ScalarrsWSDUserVersion | read-write | mandatory | Software download user provided version. |
| 1.3.6.1.4.1.89.35.1.35 | ScalarrsWSDNatStatus | read-write | mandatory | Enable/Disable NAT - to hide the address of the server in messages send . |
| 1.3.6.1.4.1.89.35.1.37 | ScalarrsWSDRedundancyTakeback | read-write | mandatory | Whether to take the interfaces when coming up from redundancy failure automatically or wait for manual terminal command |
| 1.3.6.1.4.1.89.35.1.38 | NodersMLB | |||
| 1.3.6.1.4.1.89.35.1.39 | NodersCSD | |||
| 1.3.6.1.4.1.89.35.1.40 | NodersNWSD | |||
| 1.3.6.1.4.1.89.35.1.41 | TablersWSDIfTable | not-accessible | mandatory | RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost. |
| 1.3.6.1.4.1.89.35.1.41.1 | RowrsWSDIfEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.41.1.1 | ColumnrsWSDIfIndex | read-only | mandatory | Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (M… |
| 1.3.6.1.4.1.89.35.1.41.1.2 | ColumnrsWSDIfBoardNum | read-only | mandatory | The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab. |
| 1.3.6.1.4.1.89.35.1.41.1.3 | ColumnrsWSDIfNetAddress | read-only | mandatory | The IP address of the interface defined by the particular value of rsWSDIfIndex. |
| 1.3.6.1.4.1.89.35.1.41.1.4 | ColumnrsWSDIfStatus | read-only | mandatory | The current status of the interface. |
| 1.3.6.1.4.1.89.35.1.41.1.5 | ColumnrsWSDIfClockType | read-write | mandatory | rsWSDIfClockType defines the type of clock each interface uses: internal or external. |
| 1.3.6.1.4.1.89.35.1.41.1.6 | ColumnrsWSDIfBaudRate | read-write | mandatory | Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined. |
| 1.3.6.1.4.1.89.35.1.41.1.7 | ColumnrsWSDIfCost | read-write | mandatory | This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proporti… |
| 1.3.6.1.4.1.89.35.1.41.1.8 | ColumnrsWSDIfCompression | read-write | mandatory | Defines whether data compression is enabled or disabled for the interface. |
| 1.3.6.1.4.1.89.35.1.41.1.9 | ColumnrsWSDIfCompressionStatus | read-only | mandatory | Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correct… |
| 1.3.6.1.4.1.89.35.1.41.1.10 | ColumnrsWSDIfCompressionRate | read-only | mandatory | Percentage of compression. This variable applies only if rndCompressionStatus is active. |
| 1.3.6.1.4.1.89.35.1.41.1.11 | ColumnrsWSDIfLATCompression | read-write | mandatory | Enable/Disable the LAT Compression. |
| 1.3.6.1.4.1.89.35.1.41.1.12 | ColumnrsWSDIfCompressionType | read-only | mandatory | This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed… |
| 1.3.6.1.4.1.89.35.1.41.1.13 | ColumnrsWSDIfFilterMode | read-write | mandatory | This parameter indicates the type of filtering in the device. |
| 1.3.6.1.4.1.89.35.1.41.1.14 | ColumnrsWSDIfChannelType | read-write | mandatory | The type of the WAN channel |
| 1.3.6.1.4.1.89.35.1.41.1.15 | ColumnrsWSDIfBridge | read-write | mandatory | This variable indicates whether this interface forward Layer II pakages. |
| 1.3.6.1.4.1.89.35.1.41.1.16 | ColumnrsWSDHighPriorityIf | read-write | mandatory | This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager. |
| 1.3.6.1.4.1.89.35.1.41.1.17 | ColumnrsWSDWanHeader | read-write | mandatory | This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older … |
| 1.3.6.1.4.1.89.35.1.41.1.18 | ColumnrsWSDDuplexMode | read-write | mandatory | This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode. |
| 1.3.6.1.4.1.89.35.1.42 | ScalarrsWSDClientMirrorPercentage | read-write | mandatory | The percent of client entries to back up. |
| 1.3.6.1.4.1.89.35.1.43 | ScalarrsWSDMirrorStatus | read-write | mandatory | Enable/Disable mirroring. This enables the allocation of the mirror tables. |
| 1.3.6.1.4.1.89.35.1.44 | ScalarrsWSDMirrorProtocolMode | read-write | mandatory | Enable/Disable of the mirror protocol. That is whether to send the mirror messages. |
| 1.3.6.1.4.1.89.35.1.45 | TablersWSDApplicationMirrorTable | not-accessible | mandatory | Table containing the list of active mirror entries. |
| 1.3.6.1.4.1.89.35.1.45.1 | RowrsWSDApplicationMirrorEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.45.1.1 | ColumnrsWSDMirrorActiveAddress | read-only | mandatory | The IP address of the active device. |
| 1.3.6.1.4.1.89.35.1.45.1.2 | ColumnrsWSDMirrorActiveStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.46 | ScalarrsWSDClientMirrorPollingTime | read-write | mandatory | The polling time for sending the client entries. |
| 1.3.6.1.4.1.89.35.1.47 | ScalarrsPlatformIdentifier | read-only | mandatory | An administratively-assigned value that identifies managed device platform. |
| 1.3.6.1.4.1.89.35.1.48 | ScalarrsConfigurationIdentifier | read-only | mandatory | An administratively-assigned value that identifies managed device configuration. cg - copper gig, fg - fiber gig, fxg - fiber 10gig. |
| 1.3.6.1.4.1.89.35.1.49 | ScalarrsSWPasswordStatus | read-write | mandatory | Software download password status. |
| 1.3.6.1.4.1.89.35.1.50 | ScalarrsWSDFlashSize | read-only | mandatory | Flash Size |
| 1.3.6.1.4.1.89.35.1.51 | ScalarrsWSDDRAMSize | read-only | mandatory | DRAM Size |
| 1.3.6.1.4.1.89.35.1.52 | ScalarrsWSDVLANRedundOperStatus | read-write | mandatory | Sets the backup redundant device for a VLAN. blockBroadcast - blocks only the broadcast traffic forwardTraffic - forwards the traffic blockAll - blocks broadca… |
| 1.3.6.1.4.1.89.35.1.53 | ScalarrsWSDResourceUtilization | read-only | mandatory | Highest Utilization of controller and engines |
| 1.3.6.1.4.1.89.35.1.54 | ScalarrsWSDRSResourceUtilization | read-only | mandatory | DefensePro Controller utilization |
| 1.3.6.1.4.1.89.35.1.55 | ScalarrsWSDREResourceUtilization | read-only | mandatory | Resource Utilization of network utilization |
| 1.3.6.1.4.1.89.35.1.56 | ScalarrsWSDBuildNumber | read-write | mandatory | Build number |
| 1.3.6.1.4.1.89.35.1.57 | ScalarrsWSDUseOneTrap | read-write | mandatory | When enabled, a single trap is used to indicate server failure. When disabled, continuous traps are sent. |
| 1.3.6.1.4.1.89.35.1.58 | NodersWSDSecuredComm | |||
| 1.3.6.1.4.1.89.35.1.58.1 | TablersWSDSCProtcolsTable | not-accessible | mandatory | Table containing the list of ports/protocols for secured (encrypted) communication between the device and the management station or other device. |
| 1.3.6.1.4.1.89.35.1.58.1.1 | RowrsWSDSCProtcolsEntry | not-accessible | mandatory | The row definition for protocol table. |
| 1.3.6.1.4.1.89.35.1.58.1.1.1 | ColumnrsWSDSCProtocol | read-only | mandatory | The protocol that should work in secured mode. |
| 1.3.6.1.4.1.89.35.1.58.1.1.2 | ColumnrsWSDSCProtocolStatus | read-write | mandatory | The status (secured or not secured) of the protocol. |
| 1.3.6.1.4.1.89.35.1.59 | TablersWSDSNMPPortsTable | not-accessible | mandatory | The table contains all the physical ports. Each port can be set to allow/block SNMP operations to the device. |
| 1.3.6.1.4.1.89.35.1.59.1 | RowrsWSDSNMPPortsEntry | not-accessible | mandatory | Row definition for the table. |
| 1.3.6.1.4.1.89.35.1.59.1.1 | ColumnrsWSDSNMPPhysicalPortNumber | read-only | mandatory | Physical port number. |
| 1.3.6.1.4.1.89.35.1.59.1.2 | ColumnrsWSDSNMPPhysicalPortState | read-write | mandatory | enable - accept SNMP operations on the physical port. disable - ignore SNMP opertaions on the physical port. |
| 1.3.6.1.4.1.89.35.1.59.1.3 | ColumnrsWSDSNMPPhysicalPortTelnetState | read-write | mandatory | enable - accept Telnet operations on the physical port. disable - ignore Telnet opertaions on the physical port. |
| 1.3.6.1.4.1.89.35.1.59.1.4 | ColumnrsWSDSNMPPhysicalPortSSHState | read-write | mandatory | enable - accept SSH operations on the physical port. disable - ignore SSH opertaions on the physical port. |
| 1.3.6.1.4.1.89.35.1.59.1.5 | ColumnrsWSDSNMPPhysicalPortWebState | read-write | mandatory | enable - accept Web operations on the physical port. disable - ignore Web opertaions on the physical port. |
| 1.3.6.1.4.1.89.35.1.59.1.6 | ColumnrsWSDSNMPPhysicalPortSSLState | read-write | mandatory | enable - accept SSL operations on the physical port. disable - ignore SSL opertaions on the physical port. |
| 1.3.6.1.4.1.89.35.1.60 | NodersBWM | |||
| 1.3.6.1.4.1.89.35.1.61 | TablersWSDTelnetUserTable | not-accessible | mandatory | A table containing the users authorized to use TELNET. |
| 1.3.6.1.4.1.89.35.1.61.1 | RowrsWSDTelnetUserEntry | not-accessible | mandatory | Information about a particular Telnet user. |
| 1.3.6.1.4.1.89.35.1.61.1.1 | ColumnrsWSDTelnetUserName | read-write | mandatory | User Name. |
| 1.3.6.1.4.1.89.35.1.61.1.2 | ColumnrsWSDTelnetUserPassword | read-write | mandatory | User password. |
| 1.3.6.1.4.1.89.35.1.61.1.3 | ColumnrsWSDTelnetUserEAddr | read-write | mandatory | User email address. |
| 1.3.6.1.4.1.89.35.1.61.1.4 | ColumnrsWSDTelnetUserSeverity | read-write | mandatory | minimum failure severity to be notified by mail |
| 1.3.6.1.4.1.89.35.1.61.1.5 | ColumnrsWSDTelnetUserStatus | read-write | mandatory | Entry status |
| 1.3.6.1.4.1.89.35.1.61.1.6 | ColumnrsWSDTelnetUserGroup | read-write | mandatory | The group to which that user belongs. |
| 1.3.6.1.4.1.89.35.1.61.1.7 | ColumnrsWSDTelnetUserConfigurationTraceStatus | read-write | mandatory | enable mail trace of configuration change |
| 1.3.6.1.4.1.89.35.1.61.1.8 | ColumnrsWSDTelnetUserConfigurationTraceInf | read-write | mandatory | specify configuration interfaces via which changes in configuration should be informed |
| 1.3.6.1.4.1.89.35.1.61.1.9 | ColumnrsWSDTelnetUserWebAccessLevel | read-write | mandatory | Defines access level for web based management. Either read-write, read-only or no access. |
| 1.3.6.1.4.1.89.35.1.61.1.10 | ColumnrsWSDTelnetUserSshPublicKeyName | read-write | mandatory | The name of the Certificate Entry where the ssh public key resides. |
| 1.3.6.1.4.1.89.35.1.62 | NodersWSDTelnetParams | |||
| 1.3.6.1.4.1.89.35.1.62.1 | ScalarrsWSDTelnetPort | read-write | mandatory | The Telnet Server Port. |
| 1.3.6.1.4.1.89.35.1.62.2 | ScalarrsWSDTelnetStatus | read-write | mandatory | Telnet Status. Enable/Disable Telnet Terminal operation. |
| 1.3.6.1.4.1.89.35.1.63 | NodersSSD | |||
| 1.3.6.1.4.1.89.35.1.63.1 | NodersSSDvirtualLan | |||
| 1.3.6.1.4.1.89.35.1.63.1.1 | TablersSSDvirtualLanTable | not-accessible | mandatory | An entry of this table specifies an new ifIndex with a type of propVirtual(53). |
| 1.3.6.1.4.1.89.35.1.63.1.1.1 | RowrsSSDvirtualLanEntry | not-accessible | mandatory | A list of information for each virtual LAN. |
| 1.3.6.1.4.1.89.35.1.63.1.1.1.1 | ColumnrsSSDvlIfIndex | read-write | mandatory | An logical interface number, corresponded this VL |
| 1.3.6.1.4.1.89.35.1.63.1.1.1.2 | ColumnrsSSDvlProto | read-write | mandatory | The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols.… |
| 1.3.6.1.4.1.89.35.1.63.1.1.1.3 | ColumnrsSSDvlAutoConfigEnable | read-write | mandatory | It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from… |
| 1.3.6.1.4.1.89.35.1.63.1.1.1.4 | ColumnrsSSDvlStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.35.1.63.1.1.1.5 | ColumnrsSSDvlType | read-write | mandatory | regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's … |
| 1.3.6.1.4.1.89.35.1.63.1.1.1.6 | ColumnrsSSDvlTag | read-write | mandatory | A VLAN tag, used for this VLAN on tagged ports. If it's 0, then a value of (rsSSDvlIfIndex-100000+1) is used |
| 1.3.6.1.4.1.89.35.1.63.1.1.1.7 | ColumnrsSSDvlPriority | read-write | mandatory | A user priority, used for this VLAN on tagged ports. |
| 1.3.6.1.4.1.89.35.1.63.1.1.1.8 | ColumnrsSSDvlUpCriterion | read-write | mandatory | The criterion according to which the vlan interface is considered to be up for interface grouping. |
| 1.3.6.1.4.1.89.35.1.63.1.1.1.9 | ColumnrsSSDvlDownCriterion | read-write | mandatory | The criterion according to which the vlan interface is considered to be down for interface grouping. |
| 1.3.6.1.4.1.89.35.1.63.1.2 | TablersSSDvirtualLanPortsTable | not-accessible | mandatory | For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains. |
| 1.3.6.1.4.1.89.35.1.63.1.2.1 | RowrsSSDvirtualLanPortEntry | not-accessible | mandatory | A entry of this table specifies a VL and a port belonging to it |
| 1.3.6.1.4.1.89.35.1.63.1.2.1.1 | ColumnrsSSDvLIfIndex | read-write | mandatory | An logical interface number, corresponding to this VL |
| 1.3.6.1.4.1.89.35.1.63.1.2.1.2 | ColumnrsSSDvLPortIfIndex | read-write | mandatory | A physical port belonging to the VL specified by rsSSDvlIfIndex. |
| 1.3.6.1.4.1.89.35.1.63.1.2.1.3 | ColumnrsSSDvLPortType | read-only | mandatory | static means configured by user dynamic means autoconfigured by the RS |
| 1.3.6.1.4.1.89.35.1.63.1.2.1.4 | ColumnrsSSDvLPortStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.35.1.63.1.2.1.5 | ColumnrsSSDvLPortTag | read-write | mandatory | This variable indicate if the port is tagged or untagged |
| 1.3.6.1.4.1.89.35.1.63.1.2.1.6 | ColumnrsSSDvLPortInterfaceGroupingState | read-write | mandatory | included- the port effects the VLAN Up/Down decision for interface grouping. excluded- the port does not effect the VLAN Up/Down decision for interface groupin… |
| 1.3.6.1.4.1.89.35.1.64 | NodersWSDThresholdWarnings | |||
| 1.3.6.1.4.1.89.35.1.64.1 | ScalarrsWSDThreshTrapFloodDelay | read-write | mandatory | This variable defines how far (in seconds) will 2 Threshold Warning Traps be spaced for the same Threshold Warning Type. Default = 0, i.e. DISABLED |
| 1.3.6.1.4.1.89.35.1.64.2 | ScalarrsWSDCriticalTrapFloodDelay | read-write | mandatory | This variable defines how far (in seconds) will 2 Critical Warning Traps be spaced (of any type). Default = 20 seconds. |
| 1.3.6.1.4.1.89.35.1.65 | NodersIDS | |||
| 1.3.6.1.4.1.89.35.1.66 | ScalarrsWSDLicense | read-write | mandatory | The new licence for the device |
| 1.3.6.1.4.1.89.35.1.67 | NodersErrMailParams | |||
| 1.3.6.1.4.1.89.35.1.67.1 | ScalarrsErrMailEnable | read-write | mandatory | Send email on errors enable |
| 1.3.6.1.4.1.89.35.1.67.2 | ScalarrsErrMailGateway | read-write | mandatory | primary SMTP gateway for error mail |
| 1.3.6.1.4.1.89.35.1.67.3 | ScalarrsErrMailSrcAddress | read-write | mandatory | source address to be used by device for outgoing mail |
| 1.3.6.1.4.1.89.35.1.67.4 | ScalarrsErrMailToFieldText | read-write | mandatory | Display name in 'TO:' field used by device for outgoing mail. When empty the text in the To field is generated by the device according to the message severity. |
| 1.3.6.1.4.1.89.35.1.68 | NodersWSDWebParams | |||
| 1.3.6.1.4.1.89.35.1.68.1 | ScalarrsWSDWebPort | read-write | mandatory | The Web Server Port. |
| 1.3.6.1.4.1.89.35.1.68.2 | ScalarrsWSDWebStatus | read-write | mandatory | Web Status. Enable/Disable Web operation. |
| 1.3.6.1.4.1.89.35.1.68.3 | ScalarrsWSDWebHelpLocation | read-write | mandatory | Location of the help files directory. |
| 1.3.6.1.4.1.89.35.1.68.4 | ScalarrsWSDWebSSLPort | read-write | mandatory | SSL Port |
| 1.3.6.1.4.1.89.35.1.68.5 | ScalarrsWSDWebSSLStatus | read-write | mandatory | Web SSL Status. Enable/Disable Web SSL operation. |
| 1.3.6.1.4.1.89.35.1.68.6 | ScalarrsWSDWebSSLPrivateKeyFile | read-write | mandatory | File name of the private key file used by the web server. |
| 1.3.6.1.4.1.89.35.1.68.7 | ScalarrsWSDWebSSLCertificateFile | read-write | mandatory | File name of the certificate file used by the web server. |
| 1.3.6.1.4.1.89.35.1.68.8 | ScalarrsWSDWebSSLCaFile | read-write | mandatory | File name of the CAfile used by the web server. |
| 1.3.6.1.4.1.89.35.1.68.9 | ScalarrsWSDWebSSLCaPath | read-write | mandatory | Directory where the CA certificates are stored. |
| 1.3.6.1.4.1.89.35.1.68.10 | ScalarrsWSDWebSSLClientAuthentication | read-write | mandatory | Type of client authentication. |
| 1.3.6.1.4.1.89.35.1.68.11 | ScalarrsWSDWebAccessLevel | read-write | mandatory | Determines whether web server allows read-only or also write access. In read-only mode some pages will not be available. |
| 1.3.6.1.4.1.89.35.1.68.12 | ScalarrsWSDWebSoapSupportStatus | read-write | mandatory | Whether the devices support of web services is enabled or not. |
| 1.3.6.1.4.1.89.35.1.68.13 | ScalarrsWSDWebSSLWeakCiphersSupportStatus | read-write | mandatory | Determines whether the secure web server allows SSL connections using weak ciphers security access. |
| 1.3.6.1.4.1.89.35.1.69 | NodersWSDSysParams | |||
| 1.3.6.1.4.1.89.35.1.69.1 | ScalarrsWSDSysFlashSize | read-only | mandatory | The flash size of the device in mega bytes. |
| 1.3.6.1.4.1.89.35.1.69.2 | ScalarrsWSDSysUpTime | read-only | mandatory | Time since the system was last reinitialized in a convenient format. |
| 1.3.6.1.4.1.89.35.1.69.3 | ScalarrsWSDSysManagedTime | read-write | mandatory | The time will be sent in the format hh:mm:ss |
| 1.3.6.1.4.1.89.35.1.69.4 | ScalarrsWSDSysManagedDate | read-write | mandatory | The date will be sent in the format dd/mm/yyyy |
| 1.3.6.1.4.1.89.35.1.69.5 | ScalarrsWSDSysBaseMACAddress | read-write | mandatory | Base MAC address of the device |
| 1.3.6.1.4.1.89.35.1.69.6 | NoderdwrDualPowerSupplyParams | |||
| 1.3.6.1.4.1.89.35.1.69.6.1 | ScalarrdwrPowerSupply1Status | read-only | mandatory | Status of power supply 1. Relevant only for dual power supply devices. On single power supply devices the status returned is invalid. |
| 1.3.6.1.4.1.89.35.1.69.6.2 | ScalarrdwrPowerSupply2Status | read-only | mandatory | Status of power supply 2. Relevant only for dual power supply devices. On single power supply devices the status returned is invalid. |
| 1.3.6.1.4.1.89.35.1.69.6.3 | ScalarrdwrPowerSupplyTrapStatus | read-write | mandatory | Enables the user to disable the sending of traps for the power supply status |
| 1.3.6.1.4.1.89.35.1.69.6.4 | ScalarrdwrPowerSupplyStatus | read-only | mandatory | The status of the power supply |
| 1.3.6.1.4.1.89.35.1.70 | ScalarrsWSDLicenseID | read-only | mandatory | License ID used for license downgrade |
| 1.3.6.1.4.1.89.35.1.71 | ScalarrsWSDSendFakeArp | read-write | mandatory | Controls whether a backup will send a fake ARP, advertising the main box's interfaces and VIPs, when the main box returns to service. |
| 1.3.6.1.4.1.89.35.1.72 | NodersWSDNTP | |||
| 1.3.6.1.4.1.89.35.1.72.1 | ScalarrsWSDNTPServerAddr | read-write | mandatory | Server IP address. |
| 1.3.6.1.4.1.89.35.1.72.2 | ScalarrsWSDNTPInterval | read-write | mandatory | Time update interval. |
| 1.3.6.1.4.1.89.35.1.72.3 | ScalarrsWSDNTPStatus | read-write | mandatory | Enable status for NTP synchronization. |
| 1.3.6.1.4.1.89.35.1.72.4 | ScalarrsWSDNTPTimeZone | read-write | mandatory | Offset from Greenwich time (format hh:mm). |
| 1.3.6.1.4.1.89.35.1.72.5 | ScalarrsWSDNTPPort | read-write | mandatory | A UDP Port number. |
| 1.3.6.1.4.1.89.35.1.72.6 | ScalarrsWSDNTPServerUrl | read-write | mandatory | NTP Server URL or IP address. |
| 1.3.6.1.4.1.89.35.1.73 | NodersStatistics | |||
| 1.3.6.1.4.1.89.35.1.74 | TablersPhysPortMirrorTable | not-accessible | mandatory | Table containing the list of copy ports |
| 1.3.6.1.4.1.89.35.1.74.1 | RowrsPhysPortMirrorEntry | not-accessible | mandatory | The row definition for physical copy port table. |
| 1.3.6.1.4.1.89.35.1.74.1.1 | ColumnrsPhysPortMirrorSrcInf | read-only | mandatory | The port under sniffing |
| 1.3.6.1.4.1.89.35.1.74.1.2 | ColumnrsPhysPortMirrorDstPort | read-only | mandatory | The destination port - the target sniffer port |
| 1.3.6.1.4.1.89.35.1.74.1.3 | ColumnrsPhysPortMirrorRxTx | read-write | mandatory | Copy Rx/Tx traffic to the copy port . |
| 1.3.6.1.4.1.89.35.1.74.1.4 | ColumnrsPhysPortMirrorRxBroadCast | read-write | mandatory | The copy will include broadcast/unknown or not |
| 1.3.6.1.4.1.89.35.1.74.1.5 | ColumnrsPhysPortMirrorStatus | read-write | mandatory | Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.74.1.6 | ColumnrsPhysPortMirrorBackupDstPort | read-write | mandatory | The destination port - the target sniffer port |
| 1.3.6.1.4.1.89.35.1.74.1.7 | ColumnrsPhysPortMirrorDstStatus | read-only | mandatory | The status of the dest-port according to the health check: active - the port is ok and can be used as a destination port for copy-port portDown - the port has … |
| 1.3.6.1.4.1.89.35.1.74.1.8 | ColumnrsPhysPortMirrorBackupStatus | read-only | mandatory | The status of the backup-port according to the health check: Active - the port is ok and can be used as a destination port for copy-port PortDown - the port ha… |
| 1.3.6.1.4.1.89.35.1.74.1.9 | ColumnrsPhysPortMirrorActiveDstPort | read-only | mandatory | The active dest-port at a certain time, if it is the dest-port or the backup-port or none of them. |
| 1.3.6.1.4.1.89.35.1.74.1.10 | ColumnrsPhysPortMirrorMode | read-write | mandatory | Always copy or copy according to threshold |
| 1.3.6.1.4.1.89.35.1.74.1.11 | ColumnrsPhysPortMirrorThreshold | read-write | mandatory | The copy threshold |
| 1.3.6.1.4.1.89.35.1.74.1.12 | ColumnrsPhysPortMirrorThresholdStatus | read-only | mandatory | The threshold status |
| 1.3.6.1.4.1.89.35.1.75 | NodersCP | |||
| 1.3.6.1.4.1.89.35.1.76 | NodersVWSD | |||
| 1.3.6.1.4.1.89.35.1.76.1 | TablersVWSDDataPermissionsTable | not-accessible | mandatory | Table containing the list of data items to which Farm administrators of the virtual wsd has permissions. |
| 1.3.6.1.4.1.89.35.1.76.1.1 | RowrsVWSDDataPermissionsTableEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.76.1.1.1 | ColumnrsVWSDUserGroup | read-only | mandatory | The Group of users for whom data permission is given. |
| 1.3.6.1.4.1.89.35.1.76.1.1.2 | ColumnrsVWSDDataType | read-only | mandatory | Holds a string that identifies the table of the index by which the data filtering is done. |
| 1.3.6.1.4.1.89.35.1.76.1.1.3 | ColumnrsVWSDDataItems | read-only | mandatory | The Value(s) of the index column for the data item to which permission is set. |
| 1.3.6.1.4.1.89.35.1.76.1.1.4 | ColumnrsVWSDDataStatus | read-write | mandatory | The row status for the table |
| 1.3.6.1.4.1.89.35.1.77 | ScalarrsWSDManagementPorts | read-write | mandatory | The entry indicates the functionality of the device. outOfPath implies that the device will be able to have a management port, and the rest of the ports will b… |
| 1.3.6.1.4.1.89.35.1.78 | TablersWSDManagementPortsTable | not-accessible | mandatory | Table containing the operation of each port.. |
| 1.3.6.1.4.1.89.35.1.78.1 | RowrsWSDManagementPortsEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.78.1.1 | ColumnrsWSDPortIndex | read-only | mandatory | The index of the physical ports. |
| 1.3.6.1.4.1.89.35.1.78.1.2 | ColumnrsWSDPortOperation | read-only | mandatory | The operation of the particular port. |
| 1.3.6.1.4.1.89.35.1.79 | NodersCCK | |||
| 1.3.6.1.4.1.89.35.1.80 | NodersWSDSshParams | |||
| 1.3.6.1.4.1.89.35.1.80.1 | ScalarrsWSDSshPort | read-write | mandatory | The SSH Server Port. |
| 1.3.6.1.4.1.89.35.1.80.2 | ScalarrsWSDSshStatus | read-write | mandatory | SSH Status. Enable/Disable SSH operation. |
| 1.3.6.1.4.1.89.35.1.80.3 | ScalarrsWSDSshAllowPwdAndPubKey | read-write | mandatory | SSH allow the use of password for user with public key. |
| 1.3.6.1.4.1.89.35.1.81 | NodersWSDHttpsParams | |||
| 1.3.6.1.4.1.89.35.1.81.1 | ScalarrsWSDHttpsPort | read-write | mandatory | The Https Server Port. |
| 1.3.6.1.4.1.89.35.1.81.2 | ScalarrsWSDHttpsStatus | read-write | mandatory | Https Status. Enable/Disable Https operation. |
| 1.3.6.1.4.1.89.35.1.82 | TablersWSDStaticForwardingTable | not-accessible | mandatory | Table containing the static fowarding configration. |
| 1.3.6.1.4.1.89.35.1.82.1 | RowrsWSDStaticForwardingEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.82.1.1 | ColumnrsWSDStaticSourcePort | read-only | mandatory | The index of the source port. |
| 1.3.6.1.4.1.89.35.1.82.1.2 | ColumnrsWSDStaticDestinationPort | read-write | mandatory | The destination port. |
| 1.3.6.1.4.1.89.35.1.82.1.3 | ColumnrsWSDStaticPortOperation | read-write | mandatory | The operation for the specific port. process implies that the packets will be processed (analyzed, filtered etc.) prior to being forwarded. forward implies tha… |
| 1.3.6.1.4.1.89.35.1.82.1.4 | ColumnrsWSDStaticStatus | read-write | mandatory | This variable indicates the administrative status of this entry. Used to delete an entry of this table. |
| 1.3.6.1.4.1.89.35.1.82.1.5 | ColumnrsWSDStaticFailureMode | read-write | mandatory | The link state in case the device fails. fail-open: allow traffic to continue to flow unimpeded fail-close: traffic is blocked. |
| 1.3.6.1.4.1.89.35.1.82.1.6 | ColumnrsWSDStaticInPort | read-write | mandatory | This field is needed for Apsolute Vision. |
| 1.3.6.1.4.1.89.35.1.83 | NodersRadiusServer | |||
| 1.3.6.1.4.1.89.35.1.83.1 | ScalarrsRadiusMainServerAddr | read-write | mandatory | The IP Address of the radius main server. |
| 1.3.6.1.4.1.89.35.1.83.2 | ScalarrsRadiusMainServerPort | read-write | mandatory | The port on which the radius main server listens |
| 1.3.6.1.4.1.89.35.1.83.3 | ScalarrsRadiusMainServerSecret | read-write | mandatory | The key with which the user's password is encrypted. |
| 1.3.6.1.4.1.89.35.1.83.4 | ScalarrsRadiusBackupServerAddr | read-write | mandatory | The IP Address of the backup radius server. |
| 1.3.6.1.4.1.89.35.1.83.5 | ScalarrsRadiusBackupServerPort | read-write | mandatory | The port on which the radius backup server listens |
| 1.3.6.1.4.1.89.35.1.83.6 | ScalarrsRadiusBackupServerSecret | read-write | mandatory | The key with which the user's password is encrypted. |
| 1.3.6.1.4.1.89.35.1.83.7 | ScalarrsAuthenticationMethod | read-write | mandatory | Radius authentication method. |
| 1.3.6.1.4.1.89.35.1.83.8 | ScalarrsRadiusServerTimeout | read-write | mandatory | Number of seconds to wait for reply from the radius server before retransmitting the request. |
| 1.3.6.1.4.1.89.35.1.83.9 | ScalarrsRadiusServerRetries | read-write | mandatory | Minimal number of unanswered request attempts before considering the radius server disconnected. |
| 1.3.6.1.4.1.89.35.1.83.10 | ScalarrsLockUserAfterLoginFailure | read-write | mandatory | Number of failed access attempts after which the user is locked out and cannot manage the device. 0 - never lock users. |
| 1.3.6.1.4.1.89.35.1.83.11 | ScalarrsRadiusClientLifeTime | read-write | mandatory | Number of seconds for which radius authentication replies are cached. During this time the device will use the cached response and not issue authentication req… |
| 1.3.6.1.4.1.89.35.1.83.12 | ScalarrsRadiusMainServerUrl | read-write | mandatory | The URL or IP Address of the radius main server. |
| 1.3.6.1.4.1.89.35.1.83.13 | ScalarrsRadiusBackupServerUrl | read-write | mandatory | The URL or IP Address of the backup radius server. |
| 1.3.6.1.4.1.89.35.1.83.14 | NoderspRadiusParameters | |||
| 1.3.6.1.4.1.89.35.1.83.14.1 | ScalarrspRadiusPrimaryAddr | read-write | mandatory | Primary Radius server URL or IP address. |
| 1.3.6.1.4.1.89.35.1.83.14.2 | ScalarrspRadiusPrimaryAuthPort | read-write | mandatory | Primary Radius server authentication port. |
| 1.3.6.1.4.1.89.35.1.83.14.3 | ScalarrspRadiusPrimaryAccPort | read-write | mandatory | Primary Radius server accounting port. |
| 1.3.6.1.4.1.89.35.1.83.14.4 | ScalarrspRadiusPrimarySecret | read-write | mandatory | CID and Primary Radius shared secret |
| 1.3.6.1.4.1.89.35.1.83.14.5 | ScalarrspRadiusAltAddr | read-write | mandatory | Alternate Radius server URL or IP address. |
| 1.3.6.1.4.1.89.35.1.83.14.6 | ScalarrspRadiusAltAuthPort | read-write | mandatory | Alternate Radius server authentication port. |
| 1.3.6.1.4.1.89.35.1.83.14.7 | ScalarrspRadiusAltAccPort | read-write | mandatory | Alternate Radius server accounting port. |
| 1.3.6.1.4.1.89.35.1.83.14.8 | ScalarrspRadiusAltSecret | read-write | mandatory | CID and Alternate Radius shared secret |
| 1.3.6.1.4.1.89.35.1.83.14.9 | ScalarrspRadiusOwnAuthPort | read-write | mandatory | Own Radius proxy authentication port. |
| 1.3.6.1.4.1.89.35.1.83.14.10 | ScalarrspRadiusOwnAccPort | read-write | mandatory | Own Radius proxy accounting port. |
| 1.3.6.1.4.1.89.35.1.83.14.11 | ScalarrspRadiusEnable | read-write | mandatory | Proxy Radius resolution enable. |
| 1.3.6.1.4.1.89.35.1.83.14.12 | ScalarrspRadiusTransparentEnable | read-write | mandatory | Proxy Radius transparent mode resolution enable. |
| 1.3.6.1.4.1.89.35.1.83.14.13 | TablerspRadiusRuleTable | not-accessible | mandatory | The attribute action table |
| 1.3.6.1.4.1.89.35.1.83.14.13.1 | RowrspRadiusRuleEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.83.14.13.1.1 | ColumnrspRadiusattId | read-only | mandatory | Attribute ID of the message to/from the RADIUS |
| 1.3.6.1.4.1.89.35.1.83.14.13.1.2 | ColumnrspRadiusattValue | read-only | mandatory | Attribute value of the message to/from the RADIUS |
| 1.3.6.1.4.1.89.35.1.83.14.13.1.3 | ColumnrspRadiusNetworkName | read-only | mandatory | The name of the network that the rule applied to |
| 1.3.6.1.4.1.89.35.1.83.14.13.1.4 | ColumnrspRadiusrowStatus | read-write | mandatory | Administrative status. |
| 1.3.6.1.4.1.89.35.1.83.14.14 | TablerspRadiusNasTable | not-accessible | mandatory | The NAS IP/Secret table |
| 1.3.6.1.4.1.89.35.1.83.14.14.1 | RowrspRadiusNasEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.83.14.14.1.1 | ColumnrspRadiusNasIp | read-only | mandatory | The IP of this NAS |
| 1.3.6.1.4.1.89.35.1.83.14.14.1.2 | ColumnrspRadiusNasSecret | read-write | mandatory | The secret of this NAS |
| 1.3.6.1.4.1.89.35.1.83.14.14.1.3 | ColumnrspRadiusNasrowStatus | read-write | mandatory | Administrative status. |
| 1.3.6.1.4.1.89.35.1.83.14.15 | ScalarrspRadiusUserMirrorProtocolMode | read-write | mandatory | The status of the mirroring for Radius proxy. |
| 1.3.6.1.4.1.89.35.1.83.14.16 | ScalarrspRadiusUserMirrorPollingTime | read-write | mandatory | The polling time of the Radius users table. |
| 1.3.6.1.4.1.89.35.1.83.14.17 | ScalarrspRadiusNetworkUpdatePolicy | read-write | mandatory | Define the way the device treats new user network. Replace - the device replaces current network and update the user policy. Add -the device adds the network t… |
| 1.3.6.1.4.1.89.35.1.84 | TablersIfTable | not-accessible | mandatory | Device physical interface table |
| 1.3.6.1.4.1.89.35.1.84.1 | RowrsIfEntry | not-accessible | mandatory | The row definition for this table |
| 1.3.6.1.4.1.89.35.1.84.1.1 | ColumnrsIfIndex | read-only | mandatory | interface's index |
| 1.3.6.1.4.1.89.35.1.84.1.2 | ColumnrsIfSpeed | read-write | mandatory | interface's speed |
| 1.3.6.1.4.1.89.35.1.84.1.3 | ColumnrsIfDuplex | read-write | mandatory | interface's duplex |
| 1.3.6.1.4.1.89.35.1.84.1.4 | ColumnrsIfAutoNegotiate | read-only | mandatory | interface's autonegotiation status |
| 1.3.6.1.4.1.89.35.1.84.1.5 | ColumnrsIfAutoNegotiateCfg | read-write | mandatory | interface's autonegotiation status |
| 1.3.6.1.4.1.89.35.1.84.1.6 | ColumnrsIfFEC | read-write | mandatory | interface's FEC status |
| 1.3.6.1.4.1.89.35.1.85 | ScalarrsWSDDeviceOperationMode | read-write | mandatory | Device operation mode: redirection (load balancing) or static forwarding (Dos Shield), or transparent forwarding (for IDS load balancing). |
| 1.3.6.1.4.1.89.35.1.86 | ScalarrsWSDVersionStatus | read-only | mandatory | Indicates whether the current version is closed or still open (under development). |
| 1.3.6.1.4.1.89.35.1.87 | ScalarrsWSDSyslogFacility | read-write | mandatory | The SYSLOG Priority value is calculated by multiplying the Facility number by 8 and then adding the numerical value of the Severity. |
| 1.3.6.1.4.1.89.35.1.88 | NodersACC | |||
| 1.3.6.1.4.1.89.35.1.89 | TablersWSDPingPortsTable | not-accessible | mandatory | The table contains all the physical ports. Each port can be set to allow/block Ping operations to the device. |
| 1.3.6.1.4.1.89.35.1.89.1 | RowrsWSDPingPortsEntry | not-accessible | mandatory | Row definition for the table. |
| 1.3.6.1.4.1.89.35.1.89.1.1 | ColumnrsWSDPingPhysicalPortNumber | read-only | mandatory | Physical port number. |
| 1.3.6.1.4.1.89.35.1.89.1.2 | ColumnrsWSDPingPhysicalPortState | read-write | mandatory | enable - accept Ping operations on the physical port. disable - ignore Ping opertaions on the physical port. |
| 1.3.6.1.4.1.89.35.1.90 | ScalarrsWSDBackupInterfaceGrouping | read-write | mandatory | When Backup Interface Grouping is enabled, the backup will take all interfaces when all of the main's interfaces are down. It will also release all interfaces … |
| 1.3.6.1.4.1.89.35.1.91 | ScalarrsRegistrationStatus | read-write | mandatory | Indicates whether the device has been registered. The NMS is expected to set it after successful registration. |
| 1.3.6.1.4.1.89.35.1.92 | NodersCT100 | |||
| 1.3.6.1.4.1.89.35.1.93 | ScalarrsFloatingPacketOffset | read-write | mandatory | Indicates whether the incoming packet offset may be changed by the application. This is not needed in most cases but is required for tagging of outgoing packet… |
| 1.3.6.1.4.1.89.35.1.94 | NodersDnsParameters | |||
| 1.3.6.1.4.1.89.35.1.94.1 | NodersDnsrParameters | |||
| 1.3.6.1.4.1.89.35.1.94.1.1 | ScalarrsDnsrPrimaryAddr | read-write | mandatory | Primary DNS server IP address. |
| 1.3.6.1.4.1.89.35.1.94.1.2 | ScalarrsDnsrAlternateAddr | read-write | mandatory | Alternate DNS server IP address. |
| 1.3.6.1.4.1.89.35.1.94.1.3 | ScalarrsDnsrEnable | read-write | mandatory | DNS resolution enable. |
| 1.3.6.1.4.1.89.35.1.94.1.4 | TablersDnsrStaticResTable | not-accessible | mandatory | DNS Static resolution table. The table containing URL/IP Pairs. The DNS resolver use this table in the resolution process. |
| 1.3.6.1.4.1.89.35.1.94.1.4.1 | RowrsDnsrStaticResEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.94.1.4.1.1 | ColumnrsDnsrSUrl | read-only | mandatory | The URL string in the static URL/IP resolution table. |
| 1.3.6.1.4.1.89.35.1.94.1.4.1.2 | ColumnrsDnsrSIp | read-write | mandatory | The IP Address in the static URL/IP resolution table. |
| 1.3.6.1.4.1.89.35.1.94.1.4.1.3 | ColumnrsDnsrSrowStatus | read-write | mandatory | Administrative status. |
| 1.3.6.1.4.1.89.35.1.94.2 | NodersDnsServerParameters | |||
| 1.3.6.1.4.1.89.35.1.94.2.1 | ScalarrsDnsServerEnable | read-write | mandatory | DNS server enable. |
| 1.3.6.1.4.1.89.35.1.94.2.2 | TablersDnsServerStaticResTable | not-accessible | mandatory | DNS Static resolution table. The table containing URL/IP Pairs. The DNS server use this table to look form farms IP. |
| 1.3.6.1.4.1.89.35.1.94.2.2.1 | RowrsDnsServerStaticResEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.94.2.2.1.1 | ColumnrsDnsServerSUrl | read-only | mandatory | The URL string in the static URL/IP resolution table. |
| 1.3.6.1.4.1.89.35.1.94.2.2.1.2 | ColumnrsDnsServerSIp | read-write | mandatory | The IP Address in the static URL/IP resolution table. |
| 1.3.6.1.4.1.89.35.1.94.2.2.1.3 | ColumnrsDnsServerSEnable | read-write | mandatory | Mark if the entry is enabled for the DNS server. |
| 1.3.6.1.4.1.89.35.1.94.2.2.1.4 | ColumnrsDnsServerSrowStatus | read-write | mandatory | Administrative status. |
| 1.3.6.1.4.1.89.35.1.95 | ScalarrsPrivateCheckSNMPPort | read-write | mandatory | Destination SNMP port used for private and NT checks. |
| 1.3.6.1.4.1.89.35.1.96 | ScalarrsVlanTagHandling | read-write | mandatory | Determine how to handle incoming tagged packets: forward them with the original tags or overwrite the tags with new ones before forwarding. Note that overwrite… |
| 1.3.6.1.4.1.89.35.1.97 | NodersSmtpParameters | |||
| 1.3.6.1.4.1.89.35.1.97.1 | ScalarrsSmtpPrimaryAddr | read-write | mandatory | Primary SMTP server address. |
| 1.3.6.1.4.1.89.35.1.97.2 | ScalarrsSmtpAlternateAddr | read-write | mandatory | Alternate SMTP server address. |
| 1.3.6.1.4.1.89.35.1.97.3 | ScalarrsSmtpEnable | read-write | mandatory | SMTP task enable. |
| 1.3.6.1.4.1.89.35.1.97.4 | ScalarrsSmtpOwnAddr | read-write | mandatory | Our own Email address |
| 1.3.6.1.4.1.89.35.1.97.5 | ScalarrsSmtpBackupOwnAddr | read-write | mandatory | Backup device own Email address |
| 1.3.6.1.4.1.89.35.1.98 | ScalarrsWSDSyslogUrl | read-write | mandatory | The URL/IP Address of the syslog station. |
| 1.3.6.1.4.1.89.35.1.99 | NodersFileSystem | |||
| 1.3.6.1.4.1.89.35.1.99.1 | TablersFSapplList | not-accessible | mandatory | An entry of this table specifies an an application on the compact flash. |
| 1.3.6.1.4.1.89.35.1.99.1.1 | RowrsFSapplEntry | not-accessible | mandatory | A list of information for each application. |
| 1.3.6.1.4.1.89.35.1.99.1.1.1 | ColumnrsFSapplName | read-only | mandatory | The application name |
| 1.3.6.1.4.1.89.35.1.99.1.1.2 | ColumnrsFSapplIndex | read-only | mandatory | The application index number as appears on the compact flash. |
| 1.3.6.1.4.1.89.35.1.99.1.1.3 | ColumnrsFSapplValid | read-only | mandatory | Indicate whether the application is valid or not: true(1) : Application is valid - can be set to active false(2): Application is invalid - indicates a problem … |
| 1.3.6.1.4.1.89.35.1.99.1.1.4 | ColumnrsFSapplActive | read-write | mandatory | Indicate or set the application as the current active application: true(1): active application false(2): not the active application. |
| 1.3.6.1.4.1.89.35.1.99.1.1.5 | ColumnrsFSapplVersion | read-only | mandatory | The major version of the application. |
| 1.3.6.1.4.1.89.35.1.99.1.1.6 | ColumnrsFSapplStartup | read-only | mandatory | Indicate whether the application is the startup application: true(1) : startup application false(2): not the startup application. |
| 1.3.6.1.4.1.89.35.1.99.1.1.7 | ColumnrsFSapplStatus | read-write | mandatory | delete/update an entry |
| 1.3.6.1.4.1.89.35.1.99.1.1.8 | ColumnrsFSapplVersionOS | read-only | mandatory | The OS version |
| 1.3.6.1.4.1.89.35.1.99.1.1.9 | ColumnrsFSapplVersionDP | read-only | mandatory | The DP version |
| 1.3.6.1.4.1.89.35.1.99.1.1.10 | ColumnrsFSapplVersionDME | read-only | mandatory | The DME version |
| 1.3.6.1.4.1.89.35.1.99.1.1.11 | ColumnrsFSapplVersionDD | read-only | mandatory | The DeviceDriver version |
| 1.3.6.1.4.1.89.35.1.99.2 | ScalarrsFSinstallNew | read-write | mandatory | Enable/Disable - automatic make new downloaded application the default. |
| 1.3.6.1.4.1.89.35.1.99.3 | TablerdwrConfigurationFileTable | not-accessible | mandatory | A table holding information about configuration files. |
| 1.3.6.1.4.1.89.35.1.99.3.1 | RowrdwrConfigurationFileEntry | not-accessible | mandatory | An entry in the table of configuration files |
| 1.3.6.1.4.1.89.35.1.99.3.1.1 | ColumnrdwrConfigurationFileApp | read-only | mandatory | The application the configuration file belongs to. |
| 1.3.6.1.4.1.89.35.1.99.3.1.2 | ColumnrdwrConfigurationFileName | read-only | mandatory | The name of the configuration file relative to a predefined directory holding all configuration files for a specific application. |
| 1.3.6.1.4.1.89.35.1.99.3.1.3 | ColumnrdwrConfigurationFileRunning | read-only | mandatory | Indicate whether this is the currently running configuration. |
| 1.3.6.1.4.1.89.35.1.99.3.1.4 | ColumnrdwrConfigurationFileInstalled | read-only | mandatory | Indicate whether this is the currently installed configuration, i.e. the configuration which will be associated to it's application after reset. |
| 1.3.6.1.4.1.89.35.1.99.3.1.5 | ColumnrdwrConfigurationFilePath | read-write | mandatory | The absolute path of the configuration file. When creating a new entry in this table the path must be present and indicates where the file is to be taken from. |
| 1.3.6.1.4.1.89.35.1.99.3.1.6 | ColumnrdwrConfigurationFileAction | read-write | mandatory | The required operation needed on the configuration file. |
| 1.3.6.1.4.1.89.35.1.99.3.1.7 | ColumnrdwrConfigurationFileStatus | read-write | mandatory | Operation to be performed on a specific configuration file. |
| 1.3.6.1.4.1.89.35.1.99.4 | NoderdwrDefCfg | |||
| 1.3.6.1.4.1.89.35.1.99.4.1 | ScalarrdwrDefCfgIpAddress | read-write | mandatory | The default IP address of the device |
| 1.3.6.1.4.1.89.35.1.99.4.2 | ScalarrdwrDefCfgIpMask | read-write | mandatory | The default IP mask of the device |
| 1.3.6.1.4.1.89.35.1.99.4.3 | ScalarrdwrDefCfgPort | read-write | mandatory | The default port number of the device |
| 1.3.6.1.4.1.89.35.1.99.4.4 | ScalarrdwrDefCfgGateway | read-write | mandatory | The default gatewary address of the device |
| 1.3.6.1.4.1.89.35.1.99.4.5 | ScalarrdwrDefCfgUserName | read-write | mandatory | The default root user name |
| 1.3.6.1.4.1.89.35.1.99.4.6 | ScalarrdwrDefCfgUserPassword | read-write | mandatory | The default root user password |
| 1.3.6.1.4.1.89.35.1.99.4.7 | ScalarrdwrDefCfgCommunity | read-write | mandatory | The default community string for SNMP v1 and SNMP v2 access. |
| 1.3.6.1.4.1.89.35.1.99.5 | TablerdwrApplicationFileTable | not-accessible | mandatory | A table holding information about Application files. |
| 1.3.6.1.4.1.89.35.1.99.5.1 | RowrdwrApplicationFileEntry | not-accessible | mandatory | An entry in the table of Application files |
| 1.3.6.1.4.1.89.35.1.99.5.1.1 | ColumnrdwrApplicationFileName | read-only | mandatory | The application name. |
| 1.3.6.1.4.1.89.35.1.99.5.1.2 | ColumnrdwrApplicationFileRunning | read-only | mandatory | Indicate whether this is the currently running application. |
| 1.3.6.1.4.1.89.35.1.99.5.1.3 | ColumnrdwrApplicationFileSelected | read-only | mandatory | Indicate whether this is the currently selected application, i.e. the application which will be running after reset. |
| 1.3.6.1.4.1.89.35.1.99.5.1.4 | ColumnrdwrApplicationFileValid | read-only | mandatory | Indicate whether the application is valid or not: true(1) : Application is valid - can be set to active false(2): Application is invalid - indicates a problem … |
| 1.3.6.1.4.1.89.35.1.99.5.1.5 | ColumnrdwrApplicationFileStartup | read-only | mandatory | Indicate whether the application is the startup application: true(1) : startup application false(2): not the startup application. |
| 1.3.6.1.4.1.89.35.1.99.5.1.6 | ColumnrdwrApplicationFileVersion | read-only | mandatory | The major version of the application. |
| 1.3.6.1.4.1.89.35.1.99.5.1.7 | ColumnrdwrApplicationFileAction | read-write | mandatory | Add/Select(install)/Delete an application name. |
| 1.3.6.1.4.1.89.35.1.99.5.1.8 | ColumnrdwrApplicationFileStatus | read-write | mandatory | The SNMP Operation to be performed on a specific application file. |
| 1.3.6.1.4.1.89.35.1.100 | ScalarrsWSDHardwareLicense | read-write | mandatory | The new licence for the device |
| 1.3.6.1.4.1.89.35.1.101 | ScalarrsWSDHardwareLicenseID | read-only | mandatory | License ID used for license downgrade |
| 1.3.6.1.4.1.89.35.1.102 | NoderdwrSnmpParameters | |||
| 1.3.6.1.4.1.89.35.1.102.1 | ScalarrdwrSnmpSupportedVersions | read-only | mandatory | The currently supported SNMP versions as a bit mask. |
| 1.3.6.1.4.1.89.35.1.102.2 | ScalarrdwrSnmpSupportedVersionsAfterReset | read-write | mandatory | The bit mask of supported SNMP versions after resetting the device. |
| 1.3.6.1.4.1.89.35.1.102.3 | ScalarrdwrSnmpPort | read-write | mandatory | The Snmp Port. |
| 1.3.6.1.4.1.89.35.1.102.4 | ScalarrdwrSnmpStatus | read-write | mandatory | Snmp Status. Enable/Disable Snmp operation. |
| 1.3.6.1.4.1.89.35.1.102.5 | ScalarrdwrSnmpConfigFileFormat | read-write | mandatory | The format of the configuration file. |
| 1.3.6.1.4.1.89.35.1.102.6 | ScalarrdwrSnmpErrorIndex | read-only | mandatory | The index of the field in the PDU which caused the error. Values as in the reply PDU starting with 1. |
| 1.3.6.1.4.1.89.35.1.102.7 | ScalarrdwrSnmpErrorStatus | read-only | mandatory | The status returned in the Reply PDU. |
| 1.3.6.1.4.1.89.35.1.102.8 | ScalarrdwrSnmpErrorDescription | read-only | mandatory | The description of the error. |
| 1.3.6.1.4.1.89.35.1.102.9 | ScalarrdwrSnmpErrorRequestId | read-only | mandatory | The requestId of the request which caused the last error. |
| 1.3.6.1.4.1.89.35.1.102.10 | TablerdwrSnmpErrorTbTable | not-accessible | mandatory | Table containing the list of errors occured |
| 1.3.6.1.4.1.89.35.1.102.10.1 | RowrdwrSnmpErrorTbEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.102.10.1.1 | ColumnrdwrSnmpErrorTbRequestId | read-only | mandatory | This variable indicates the requestId of the request which caused the error. |
| 1.3.6.1.4.1.89.35.1.102.10.1.2 | ColumnrdwrSnmpErrorTbVarId | read-only | mandatory | This variable indicates the variable Oid |
| 1.3.6.1.4.1.89.35.1.102.10.1.3 | ColumnrdwrSnmpErrorTbDescription | read-only | mandatory | This variable indicates the description of the error |
| 1.3.6.1.4.1.89.35.1.102.10.1.4 | ColumnrdwrSnmpErrorTbErrorIndex | read-only | mandatory | This variable indicates the index of the field in the PDU which caused the error (start at 1) |
| 1.3.6.1.4.1.89.35.1.102.10.1.5 | ColumnrdwrSnmpErrorTbType | read-only | mandatory | This variable indicates the type of error. |
| 1.3.6.1.4.1.89.35.1.102.10.1.6 | ColumnrdwrSnmpErrorTbStatus | read-only | mandatory | This variable indicates the type of error. |
| 1.3.6.1.4.1.89.35.1.102.10.1.7 | ColumnrdwrSnmpErrorTbFieldInEntry | read-only | mandatory | This variable indicates the index of the field in an entry (0 for scalar) |
| 1.3.6.1.4.1.89.35.1.102.10.1.8 | ColumnrdwrSnmpErrorTbTime | read-only | mandatory | This variable indicates the time the error occurred, the time will be in the format hh:mm:ss |
| 1.3.6.1.4.1.89.35.1.102.10.1.9 | ColumnrdwrSnmpErrorTbDate | read-only | mandatory | This variable indicates the time the error occurred, the date will be in the format dd/mm/yyyy |
| 1.3.6.1.4.1.89.35.1.102.11 | ScalarrdwrSnmpErrorTbTableReset | read-write | mandatory | Reset the SNMP error table |
| 1.3.6.1.4.1.89.35.1.102.12 | TablerdwrLastConfigurationChangesTable | not-accessible | mandatory | Table containing the list of last configuration changes occured. |
| 1.3.6.1.4.1.89.35.1.102.12.1 | RowrdwrLastConfigurationChangesEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.102.12.1.1 | ColumnrdwrLastConfigurationChangesID | read-only | mandatory | This variable indicates the change ID |
| 1.3.6.1.4.1.89.35.1.102.12.1.2 | ColumnrdwrLastConfigurationChangesStatus | read-write | mandatory | Entry status. It is used to delete an entry |
| 1.3.6.1.4.1.89.35.1.102.12.1.3 | ColumnrdwrLastConfigurationChangesMibOid | read-only | mandatory | This variable indicates Mib OID. |
| 1.3.6.1.4.1.89.35.1.102.12.1.4 | ColumnrdwrLastConfigurationChangesChangeType | read-only | mandatory | This variable indicates ChangeType |
| 1.3.6.1.4.1.89.35.1.102.12.1.5 | ColumnrdwrLastConfigurationChangesKeys | read-only | mandatory | This variable indicates Keys. |
| 1.3.6.1.4.1.89.35.1.102.13 | ScalarrdwrLastConfigurationChangesTableReset | read-write | mandatory | Reset the Last Configuration Changes table |
| 1.3.6.1.4.1.89.35.1.102.14 | ScalarrdwrLastConfigurationChangesTimestamp | read-only | mandatory | The value of sysUpTime at the last configuration change. |
| 1.3.6.1.4.1.89.35.1.102.15 | ScalarrdwrLastConfigurationChangesTime | read-only | mandatory | Last configuration change time, time since 00:00:00 GMT, Jan. 1, 1970, measured in seconds. |
| 1.3.6.1.4.1.89.35.1.103 | ScalarrsWSDSyslogSourcePort | read-write | mandatory | Determines the source port with which Syslog packets will be sent. |
| 1.3.6.1.4.1.89.35.1.104 | NodersSESSION | |||
| 1.3.6.1.4.1.89.35.1.105 | NodersLinkAggregationHash | |||
| 1.3.6.1.4.1.89.35.1.105.1 | ScalarrsLinkAggregationL2Hash | read-write | mandatory | Layer 2 addresses usage in the hash function |
| 1.3.6.1.4.1.89.35.1.105.2 | ScalarrsLinkAggregationL3Hash | read-write | mandatory | Layer 3 addresses usage in the hash function |
| 1.3.6.1.4.1.89.35.1.105.3 | ScalarrsLinkAggregationL4Hash | read-write | mandatory | Layer 4 ports usage in the hash function |
| 1.3.6.1.4.1.89.35.1.106 | TablersScheduleTable | not-accessible | mandatory | The table of event schedules. All schedules are kept in it. |
| 1.3.6.1.4.1.89.35.1.106.1 | RowrsScheduleEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.106.1.1 | ColumnrsScheduleName | read-write | mandatory | The name of the schedule. It is the primary key |
| 1.3.6.1.4.1.89.35.1.106.1.2 | ColumnrsScheduleFrequency | read-write | mandatory | The frequency of the event. |
| 1.3.6.1.4.1.89.35.1.106.1.3 | ColumnrsScheduleTime | read-write | mandatory | The time will be sent in the format hhmm- 0 means field not relevant |
| 1.3.6.1.4.1.89.35.1.106.1.4 | ColumnrsScheduleDays | read-write | mandatory | Each octet represents status of day. 0 -not selected, 1-selected. The order is: Sunday 1000000 Monday 0100000 Tuesday 0010000 wednesday 0001000 Thursday 000010… |
| 1.3.6.1.4.1.89.35.1.106.1.5 | ColumnrsScheduleDate | read-write | mandatory | The date will be sent in the format ddmmyyyy - 0 means field not relevant |
| 1.3.6.1.4.1.89.35.1.106.1.6 | ColumnrsScheduleStatus | read-write | mandatory | delete/update an entry |
| 1.3.6.1.4.1.89.35.1.107 | NoderdwrFtpParameters | |||
| 1.3.6.1.4.1.89.35.1.107.1 | ScalarrdwrFtpPort | read-write | mandatory | The FTP Server Port. |
| 1.3.6.1.4.1.89.35.1.107.2 | ScalarrdwrFtpStatus | read-write | mandatory | Ftp Status. Enable/Disable Ftp Server. |
| 1.3.6.1.4.1.89.35.1.108 | ScalarrsFullMacCompareStatus | read-write | mandatory | Select whether all 48 bits of the destination MAC address are used to determine if a packet is destined to the device, or just 42 (the default) |
| 1.3.6.1.4.1.89.35.1.109 | NodersREStateMonitoring | |||
| 1.3.6.1.4.1.89.35.1.109.1 | NodersREACCReasonCounters | |||
| 1.3.6.1.4.1.89.35.1.109.1.1 | ScalarrsACCReasonUnknownCounter | read-only | mandatory | ACC send packet to master with reason unknown |
| 1.3.6.1.4.1.89.35.1.109.1.2 | ScalarrsACCReasonETHBroadcastCounter | read-only | mandatory | ACC send packet to master with reason ETH broadcast |
| 1.3.6.1.4.1.89.35.1.109.1.3 | ScalarrsACCReasonProtolcolTypeCounter | read-only | mandatory | ACC send packet to master with reason protolcol type |
| 1.3.6.1.4.1.89.35.1.109.1.4 | ScalarrsACCReasonIPVERCounter | read-only | mandatory | ACC send packet to master with reason IP ver |
| 1.3.6.1.4.1.89.35.1.109.1.5 | ScalarrsACCReasonIPHeaderLenCounter | read-only | mandatory | ACC send packet to master with reason IP header lenght |
| 1.3.6.1.4.1.89.35.1.109.1.6 | ScalarrsACCReasonIPFragmentedCounter | read-only | mandatory | ACC send packet to master with reason IP fragmented |
| 1.3.6.1.4.1.89.35.1.109.1.7 | ScalarrsACCReasonTTLCounter | read-only | mandatory | ACC send packet to master with reason TTL 1 or 0 |
| 1.3.6.1.4.1.89.35.1.109.1.8 | ScalarrsACCReasonNoFlowCounter | read-only | mandatory | ACC send packet to master with reason no flow |
| 1.3.6.1.4.1.89.35.1.109.1.9 | ScalarrsACCReasonMACCFGCounter | read-only | mandatory | ACC send packet to master with reason MAC cfg |
| 1.3.6.1.4.1.89.35.1.109.1.10 | ScalarrsACCReasonSYNcookieOKCounter | read-only | mandatory | ACC send packet to master with reason SYN cookie OK |
| 1.3.6.1.4.1.89.35.1.109.1.11 | ScalarrsACCReasonSYNcookieInvalidCounter | read-only | mandatory | ACC send packet to master with reason SYN cookie invalid |
| 1.3.6.1.4.1.89.35.1.109.1.12 | ScalarrsACCReasonInconsistentPktLenCounter | read-only | mandatory | ACC send packet to master with reason inconsistent packet lenght |
| 1.3.6.1.4.1.89.35.1.109.1.13 | ScalarrsACCReasonNoReasonCounter | read-only | mandatory | ACC send packet to master with reason no reason |
| 1.3.6.1.4.1.89.35.1.109.1.14 | ScalarrsACCReasonFTPportCounter | read-only | mandatory | ACC send packet to master with reason FTP port in packet |
| 1.3.6.1.4.1.89.35.1.109.1.15 | ScalarrsACCReasonFTP227Counter | read-only | mandatory | ACC send packet to master with reason FTP 227 in packet |
| 1.3.6.1.4.1.89.35.1.109.1.16 | ScalarrsACCReasonIPLenghtCounter | read-only | mandatory | ACC send packet to master with reason IP lenght > 40, this means a packet with data |
| 1.3.6.1.4.1.89.35.1.109.1.17 | ScalarrsACCReasonFINorRSTCounter | read-only | mandatory | ACC send packet to master with reason FIN or RST, the session has ended |
| 1.3.6.1.4.1.89.35.1.109.1.18 | ScalarrsACCReasonClassifyCounter | read-only | mandatory | ACC send packet to master with reason classify |
| 1.3.6.1.4.1.89.35.1.109.1.19 | ScalarrsACCReasonVlanReplyCounter | read-only | mandatory | ACC send packet to master with reason VLAN Reply |
| 1.3.6.1.4.1.89.35.1.109.1.20 | ScalarrsACCReasonDBindNewSYNCounter | read-only | mandatory | ACC send packet to master with reason new SYN on delayed binding |
| 1.3.6.1.4.1.89.35.1.109.1.21 | ScalarrsACCReasonAllToMasterCounter | read-only | mandatory | ACC send packet to master with reason all traffic |
| 1.3.6.1.4.1.89.35.1.109.2 | NodersREStateCounters | |||
| 1.3.6.1.4.1.89.35.1.109.2.1 | ScalarrsREStateRXReplyCounter | read-only | mandatory | RE is state rx reply |
| 1.3.6.1.4.1.89.35.1.109.2.2 | ScalarrsREStateRXRequestCounter | read-only | mandatory | RE is state rx request |
| 1.3.6.1.4.1.89.35.1.109.2.3 | ScalarrsREStateIPDAinFFTCounter | read-only | mandatory | Packet IPDA in FFT |
| 1.3.6.1.4.1.89.35.1.109.2.4 | ScalarrsREStateIPDAnotFFTCounter | read-only | mandatory | Packet IPDA not FFT |
| 1.3.6.1.4.1.89.35.1.109.2.5 | ScalarrsREStateBridgeCounter | read-only | mandatory | Performing bridging |
| 1.3.6.1.4.1.89.35.1.109.3 | ScalarrsREStateResetCounter | read-write | mandatory | Reset the ACC counters |
| 1.3.6.1.4.1.89.35.1.110 | NoderdwrTerminalParams | |||
| 1.3.6.1.4.1.89.35.1.110.1 | TablerdwrTerminalAliasTable | not-accessible | mandatory | A table containing the alias strings of a specific user. |
| 1.3.6.1.4.1.89.35.1.110.1.1 | RowrdwrTerminalAliasEntry | not-accessible | mandatory | Information about a particular Alias entry. |
| 1.3.6.1.4.1.89.35.1.110.1.1.1 | ColumnrdwrTerminalAliasName | read-write | mandatory | Alias string. |
| 1.3.6.1.4.1.89.35.1.110.1.1.2 | ColumnrdwrTerminalUserName | read-write | mandatory | User name string. |
| 1.3.6.1.4.1.89.35.1.110.1.1.3 | ColumnrdwrTerminalAliasCommand | read-write | mandatory | command string. |
| 1.3.6.1.4.1.89.35.1.110.1.1.4 | ColumnrdwrTerminalAliasStatus | read-write | mandatory | Entry status |
| 1.3.6.1.4.1.89.35.1.110.2 | ScalarrdwrTerminalPrompt | read-write | mandatory | The system prompt of the device. |
| 1.3.6.1.4.1.89.35.1.111 | TablerdwrMasterInterfaceGroupingPortsTable | not-accessible | mandatory | The table contains all the physical ports. Each port can be set to included/excluded from the master interface grouping. |
| 1.3.6.1.4.1.89.35.1.111.1 | RowrdwrMasterInterfaceGroupingPortsEntry | not-accessible | mandatory | Row definition for the table. |
| 1.3.6.1.4.1.89.35.1.111.1.1 | ColumnrdwrMasterInterfaceGroupingPortNumber | read-only | mandatory | Physical port number. |
| 1.3.6.1.4.1.89.35.1.111.1.2 | ColumnrdwrMasterInterfaceGroupingPortState | read-write | mandatory | included- the port effects the master interface grouping. excluded- the port does not effects the master interface grouping. |
| 1.3.6.1.4.1.89.35.1.112 | Scalarrdwr5SecAvgResourceUtilization | read-only | mandatory | Last 5 sec. Engine Average Utilization |
| 1.3.6.1.4.1.89.35.1.113 | Scalarrdwr60SecAvgResourceUtilization | read-only | mandatory | Last 60 sec. Engine Average Utilization |
| 1.3.6.1.4.1.89.35.1.114 | ScalarrdwrArpWithInterfaceGroup | read-write | mandatory | indicates if the device should send arp request (broadcast) when redundancy enable (interface grouping enable) and the (main) device is down (interface/s go do… |
| 1.3.6.1.4.1.89.35.1.115 | NoderdwrDBind | |||
| 1.3.6.1.4.1.89.35.1.116 | NoderdwrDP | |||
| 1.3.6.1.4.1.89.35.1.117 | NodersDOS | |||
| 1.3.6.1.4.1.89.35.1.118 | NodersSTATEFUL | |||
| 1.3.6.1.4.1.89.35.1.119 | NodersAPM | |||
| 1.3.6.1.4.1.89.35.1.120 | NoderdwrIpsec | |||
| 1.3.6.1.4.1.89.35.1.120.1 | NoderdwrIpsecIke | |||
| 1.3.6.1.4.1.89.35.1.120.1.1 | TablerdwrIkeTable | not-accessible | mandatory | A table holding information about ike connections |
| 1.3.6.1.4.1.89.35.1.120.1.1.1 | RowrdwrIkeEntry | not-accessible | mandatory | An entry in the ike table |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.1 | ColumnrdwrIkeName | read-only | mandatory | The name of this entry in the ike table. |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.2 | ColumnrdwrIkePhase1EncryptionAlg | read-write | mandatory | The encryption algorithm used in phase1 negotiation |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.3 | ColumnrdwrIkePhase1HashAlg | read-write | mandatory | The hash algorithm used in phase1 negotiation |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.4 | ColumnrdwrIkePhase1DhKeyGroup | read-write | mandatory | The Diffie Hellman Group used in phase1 negotiations |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.5 | ColumnrdwrIkePhase1LifeTime | read-write | mandatory | The lifetime in seconds |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.6 | ColumnrdwrIkePhase1Psk | read-write | mandatory | The Pre Shared Key |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.7 | ColumnrdwrIkePhase2Protocol | read-write | mandatory | The Encapsulation protocol |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.8 | ColumnrdwrIkePhase2EncryptionAlg | read-write | mandatory | The encryption algorithm to be used in phase2 negotiation |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.9 | ColumnrdwrIkePhase2HashAlg | read-write | mandatory | The hash algorithm to be used in phase2 negotiation |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.10 | ColumnrdwrIkePfsKeyGroup | read-write | mandatory | The Diffie Hellman Group to be used in phase2 negotiations |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.11 | ColumnrdwrIkeSaLifeTime | read-write | mandatory | The lifetime in seconds |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.12 | ColumnrdwrIkeIpCompression | read-write | mandatory | Indicate whether to use ip compression. |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.13 | ColumnrdwrIkeManualKeyMode | read-write | mandatory | indicate the ipSec key mode: IKE (automatic) or manual |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.14 | ColumnrdwrIkeEncrypKey | read-write | mandatory | the encryption key in case of manual mode |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.15 | ColumnrdwrIkeAuthntKey | read-write | mandatory | the authentication key in case of manual mode |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.16 | ColumnrdwrIkeInSpi | read-write | mandatory | the inbound SPI value for manual key mode |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.17 | ColumnrdwrIkeOutSpi | read-write | mandatory | the outbound SPI value for manual key mode |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.18 | ColumnrdwrIkeDPDCheckInterval | read-write | mandatory | interval for the keep alive checks |
| 1.3.6.1.4.1.89.35.1.120.1.1.1.19 | ColumnrdwrIkeStatus | read-write | mandatory | Operation to be performed on a specific ike table entry. |
| 1.3.6.1.4.1.89.35.1.121 | ScalarrdwrDedicatedManagementPort | read-write | mandatory | A dedicated port for management - 0 is Not Assigned |
| 1.3.6.1.4.1.89.35.1.122 | NodersGeneric | |||
| 1.3.6.1.4.1.89.35.1.123 | NoderdwrClientsTableStatistics | |||
| 1.3.6.1.4.1.89.35.1.123.1 | ScalarrdwrClientsTableNumEntries | read-only | mandatory | Number of entries in the clients table. |
| 1.3.6.1.4.1.89.35.1.123.2 | ScalarrdwrClientsTableNumEntries5SecAvg | read-only | mandatory | Average number of entries in the clients table in the last 5 seconds. |
| 1.3.6.1.4.1.89.35.1.123.3 | ScalarrdwrClientsTableNumEntries60SecAvg | read-only | mandatory | Average number of entries in the clients table in the last 60 seconds. |
| 1.3.6.1.4.1.89.35.1.124 | ScalarrsWSDSyslogDestinationPort | read-write | mandatory | Determines the destination port with which Syslog packets will be sent. |
| 1.3.6.1.4.1.89.35.1.125 | TablerdwrPortsTagTable | not-accessible | mandatory | The table contains all the physical ports. Each entry can force port tag for incoming and outgoing traffic. |
| 1.3.6.1.4.1.89.35.1.125.1 | RowrdwrPortsTagEntry | not-accessible | mandatory | Row definition for the table. |
| 1.3.6.1.4.1.89.35.1.125.1.1 | ColumnrdwrPortsTagPortNumber | read-only | mandatory | Physical port number. |
| 1.3.6.1.4.1.89.35.1.125.1.2 | ColumnrdwrPortsTagPortInTag | read-write | mandatory | The incoming physical port vlan Tag value that represent this port. |
| 1.3.6.1.4.1.89.35.1.125.1.3 | ColumnrdwrPortsTagPortOutTag | read-write | mandatory | The outgoing physical port vlan Tag value that represent this port. |
| 1.3.6.1.4.1.89.35.1.126 | ScalarrsPhysPortMirrorThresholdUnits | read-write | mandatory | Units used to measure port-mirroring threshold. |
| 1.3.6.1.4.1.89.35.1.127 | ScalarrsPhysPortMirrorThresholdInterval | read-write | mandatory | Time interval in which port mirroring will be active, if the mode is threshold |
| 1.3.6.1.4.1.89.35.1.128 | ScalarrsPhysPortMirrorThresholdReset | read-write | mandatory | Reset the port mirroring threshold |
| 1.3.6.1.4.1.89.35.1.129 | NoderdwrDayLightSaving | |||
| 1.3.6.1.4.1.89.35.1.129.1 | ScalarrdwrDayLightSavingBegins | read-write | mandatory | The day light saving beginning, this can be either a specific date - format D|DD/Mon/HH, or a recurring date - format R|x/Day/Mon/HH |
| 1.3.6.1.4.1.89.35.1.129.2 | ScalarrdwrDayLightSavingEnds | read-write | mandatory | The day light saving ending, this can be either a specific date - format D|DD/Mon/HH, or a recurring date - format R|x/Day/Mon/HH |
| 1.3.6.1.4.1.89.35.1.129.3 | ScalarrdwrDayLightSavingTimeDesignations | read-only | mandatory | The day light saving actual designation. |
| 1.3.6.1.4.1.89.35.1.129.4 | ScalarrdwrDayLightSavingAdminStatus | read-write | mandatory | The day light saving administrator status. |
| 1.3.6.1.4.1.89.35.1.129.5 | ScalarrdwrDayLightSavingBeginDate | read-only | mandatory | Returns the date of the beginning of the daylight saving |
| 1.3.6.1.4.1.89.35.1.129.6 | ScalarrdwrDayLightSavingEndDate | read-only | mandatory | Returns the date of the end of the daylight saving |
| 1.3.6.1.4.1.89.35.1.129.7 | ScalarrdwrDayLightSavingDelta | read-write | mandatory | Indicates the daylight savings delta. When the daylight savings starts the hour will be moved back delta hours. When it is started it will be moved forward del… |
| 1.3.6.1.4.1.89.35.1.130 | NoderdwrCommonClientTable | |||
| 1.3.6.1.4.1.89.35.1.130.1 | TablerdwrClientsViewTable | not-accessible | mandatory | A table holding information for defining client table views (filtering) |
| 1.3.6.1.4.1.89.35.1.130.1.1 | RowrdwrClientsViewEntry | not-accessible | mandatory | An entry in the client views table |
| 1.3.6.1.4.1.89.35.1.130.1.1.1 | ColumnrdwrClientsViewIndex | read-only | mandatory | The index of this entry in the views table. |
| 1.3.6.1.4.1.89.35.1.130.1.1.2 | ColumnrdwrClientsViewSrcAddrFrom | read-write | mandatory | The IP Address of the low boundary of the source interval. |
| 1.3.6.1.4.1.89.35.1.130.1.1.3 | ColumnrdwrClientsViewSrcAddrTo | read-write | mandatory | The IP Address of the high boundary of the source interval. |
| 1.3.6.1.4.1.89.35.1.130.1.1.4 | ColumnrdwrClientsViewDstAddrFrom | read-write | mandatory | The IP Address of the low boundary of the requested interval. |
| 1.3.6.1.4.1.89.35.1.130.1.1.5 | ColumnrdwrClientsViewDstAddrTo | read-write | mandatory | The IP Address of the high boundary of the requested interval. |
| 1.3.6.1.4.1.89.35.1.130.1.1.6 | ColumnrdwrClientsViewSrcPortFrom | read-write | mandatory | The TCP/UDP port of the low boundary of the source interval. |
| 1.3.6.1.4.1.89.35.1.130.1.1.7 | ColumnrdwrClientsViewSrcPortTo | read-write | mandatory | The TCP/UDP port of the high boundary of the source interval. |
| 1.3.6.1.4.1.89.35.1.130.1.1.8 | ColumnrdwrClientsViewDstPortFrom | read-write | mandatory | The TCP/UDP port of the low boundary of the requested interval. |
| 1.3.6.1.4.1.89.35.1.130.1.1.9 | ColumnrdwrClientsViewDstPortTo | read-write | mandatory | The TCP/UDP port of the high boundary of the requested interval. |
| 1.3.6.1.4.1.89.35.1.130.1.1.10 | ColumnrdwrClientsViewFarmAddr | read-write | mandatory | The client IP Address of the farm. |
| 1.3.6.1.4.1.89.35.1.130.1.1.11 | ColumnrdwrClientsViewServerAddr | read-write | mandatory | The client IP Address of the server. |
| 1.3.6.1.4.1.89.35.1.130.1.1.12 | ColumnrdwrClientsViewClientType | read-write | mandatory | The client type |
| 1.3.6.1.4.1.89.35.1.130.1.1.13 | ColumnrdwrClientsViewAdminStatus | read-write | mandatory | Administrative status of the view entry enabled - activates the view. disabled - inactive the view. |
| 1.3.6.1.4.1.89.35.1.130.1.1.14 | ColumnrdwrClientsViewStatus | read-write | mandatory | It is used to create and delete a filter |
| 1.3.6.1.4.1.89.35.1.130.1.1.15 | ColumnrdwrClientsViewAction | read-write | mandatory | The type of action to be performed on entries matching this filter. |
| 1.3.6.1.4.1.89.35.1.130.1.1.16 | ColumnrdwrClientsViewActionFeedback | read-only | mandatory | Message containing feedback for the action taken. |
| 1.3.6.1.4.1.89.35.1.130.1.1.17 | ColumnrdwrClientsViewVlanTag | read-write | mandatory | 802.1q VLAN tag associated with the client entry. 0 - no tag. |
| 1.3.6.1.4.1.89.35.1.130.1.1.18 | ColumnrdwrClientsViewFarmName | read-write | mandatory | The client's farm name. |
| 1.3.6.1.4.1.89.35.1.130.2 | TablerdwrClientsTable | not-accessible | mandatory | A table holding the device filtered client table |
| 1.3.6.1.4.1.89.35.1.130.2.1 | RowrdwrClientsEntry | not-accessible | mandatory | An entry in the client table |
| 1.3.6.1.4.1.89.35.1.130.2.1.1 | ColumnrdwrClientsIndex | read-only | mandatory | The index of this entry in the table. |
| 1.3.6.1.4.1.89.35.1.130.2.1.2 | ColumnrdwrClientsSourceAddr | read-write | mandatory | The client source address. |
| 1.3.6.1.4.1.89.35.1.130.2.1.3 | ColumnrdwrClientsSourcePort | read-write | mandatory | The clinet source port. |
| 1.3.6.1.4.1.89.35.1.130.2.1.4 | ColumnrdwrClientsRequestedAddr | read-write | mandatory | The client requested address. |
| 1.3.6.1.4.1.89.35.1.130.2.1.5 | ColumnrdwrClientsRequestedPort | read-write | mandatory | The client requested TCP/UDP Port. |
| 1.3.6.1.4.1.89.35.1.130.2.1.6 | ColumnrdwrClientsFarmAddr | read-only | mandatory | IP Address of the farm the client trough which the client connected. |
| 1.3.6.1.4.1.89.35.1.130.2.1.7 | ColumnrdwrClientsServerAddr | read-only | mandatory | IP Address of server currently serving this client. |
| 1.3.6.1.4.1.89.35.1.130.2.1.8 | ColumnrdwrClientsServerPort | read-only | mandatory | TCP/UDP Port of server currently serving this client. |
| 1.3.6.1.4.1.89.35.1.130.2.1.9 | ColumnrdwrClientsAttachedTime | read-only | mandatory | Indicates when the client was attached. Measured in seconds since device re-initialization. |
| 1.3.6.1.4.1.89.35.1.130.2.1.10 | ColumnrdwrClientsNATaddr | read-only | mandatory | NAT IP Address of the client. |
| 1.3.6.1.4.1.89.35.1.130.2.1.11 | ColumnrdwrClientsNATPort | read-only | mandatory | NAT TCP/UDP port of the client. |
| 1.3.6.1.4.1.89.35.1.130.2.1.12 | ColumnrdwrClientsTimeToLive | read-only | mandatory | This variable measures the client time to live in seconds. |
| 1.3.6.1.4.1.89.35.1.130.2.1.13 | ColumnrdwrClientsClientType | read-only | mandatory | This variable indicates the administrative type of this entry. |
| 1.3.6.1.4.1.89.35.1.130.2.1.14 | ColumnrdwrClientsClientMode | read-only | mandatory | This variable indicates how a single client's sessions are handled in the client table. |
| 1.3.6.1.4.1.89.35.1.130.2.1.15 | ColumnrdwrClientsUserData1 | read-only | mandatory | This variable holds miscellaneous client information. |
| 1.3.6.1.4.1.89.35.1.130.2.1.16 | ColumnrdwrClientsUserData2 | read-only | mandatory | This variable holds miscellaneous client information. |
| 1.3.6.1.4.1.89.35.1.130.2.1.17 | ColumnrdwrClientsStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.35.1.130.3 | TablerdwrClientsTypeTable | not-accessible | mandatory | A table holding the client types |
| 1.3.6.1.4.1.89.35.1.130.3.1 | RowrdwrClientsTypeEntry | not-accessible | mandatory | An entry in the client types table |
| 1.3.6.1.4.1.89.35.1.130.3.1.1 | ColumnrdwrClientsType | read-only | mandatory | The clinet type of this entry. |
| 1.3.6.1.4.1.89.35.1.131 | TablerdwrVersionIdentifierTable | not-accessible | mandatory | Row holding version verification information. |
| 1.3.6.1.4.1.89.35.1.131.1 | RowrdwrVersionIdentifierEntry | not-accessible | mandatory | Row definition for the table. |
| 1.3.6.1.4.1.89.35.1.131.1.1 | ColumnrdwrVersionIdentifierIdx | read-only | mandatory | Installed version index. Calculated by version major * 100 + version minor |
| 1.3.6.1.4.1.89.35.1.131.1.2 | ColumnrdwrVersionIdentifierBase | read-write | mandatory | Installed version base number. |
| 1.3.6.1.4.1.89.35.1.131.1.3 | ColumnrdwrVersionIdentifierVal | read-write | mandatory | Installed version identifier string. |
| 1.3.6.1.4.1.89.35.1.132 | NoderdwrVrrp | |||
| 1.3.6.1.4.1.89.35.1.132.1 | ScalarrdwrVrrpAdmin | read-write | mandatory | Control all VRIDs admin status. |
| 1.3.6.1.4.1.89.35.1.132.2 | ScalarrdwrVrrpOperAdvertisementInterval | read-write | mandatory | The time interval, in milliseconds, between sending advertisement messages for all VRIDs. Only the master router sends VRRP advertisements. |
| 1.3.6.1.4.1.89.35.1.132.3 | TablerdwrVrrpAssoIpV6AddrTable | not-accessible | mandatory | This MIB describes proparitery radware support for managing Virtual Router Redundancy Protocol (VRRP). Most of the support is given via the VRRP mib |
| 1.3.6.1.4.1.89.35.1.132.3.1 | RowrdwrVrrpAssoIpV6AddrEntry | not-accessible | mandatory | An entry in the table contains an IPv6 address that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number … |
| 1.3.6.1.4.1.89.35.1.132.3.1.1 | ColumnrdwrVrrpAssoIpV6IfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.35.1.132.3.1.2 | ColumnrdwrVrrpAssoIpV6VrId | read-only | mandatory | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.4.1.89.35.1.132.3.1.3 | ColumnrdwrVrrpAssoIpV6Addr | read-only | mandatory | The assigned IPv6 addresses that a virtual router is responsible for backing up. |
| 1.3.6.1.4.1.89.35.1.132.3.1.4 | ColumnrdwrVrrpAssoIpV6AddrRowStatus | read-write | mandatory | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results… |
| 1.3.6.1.4.1.89.35.1.132.4 | ScalarrdwrVrrpPriorityTracking | read-write | mandatory | VRRP priority tracking weight for interface link status, zero is disabled |
| 1.3.6.1.4.1.89.35.1.134 | NoderdwrWSDCommon | |||
| 1.3.6.1.4.1.89.35.1.139 | NoderdwrCdbParameters | |||
| 1.3.6.1.4.1.89.35.1.139.1 | ScalarrdwrCdbTimeStamp | read-write | mandatory | The time stamp taken when the the CDB was last changed. Defined as the number of seconds since 1/1/1970. |
| 1.3.6.1.4.1.89.35.1.140 | NoderdwrMirroring | |||
| 1.3.6.1.4.1.89.35.1.140.1 | ScalarrdwrMirroringActiveThreshold | read-write | mandatory | The maximum amount of entries to be sent from the active device. |
| 1.3.6.1.4.1.89.35.1.140.2 | ScalarrdwrMirroringActiveSleep | read-write | mandatory | After sending the maximum amount of entries the active device will sleep for the predefined period (in milliseconds). |
| 1.3.6.1.4.1.89.35.1.140.3 | ScalarrdwrMirroringActiveBackupThreshold | read-write | mandatory | The maximum amount of entries to be sent from the active device to the backup (after the backup device is up). |
| 1.3.6.1.4.1.89.35.1.140.4 | ScalarrdwrMirroringActiveBackupSleep | read-write | mandatory | After sending the maximum amount of entries the active device will sleep for the predefined period (in milliseconds). |
| 1.3.6.1.4.1.89.35.1.140.5 | ScalarrdwrMirroringActiveBackupHoldtime | read-write | mandatory | The active device will start to notify the main of all existing entries after the configured time (in milliseconds). |
| 1.3.6.1.4.1.89.35.1.140.6 | ScalarrdwrMirroringActiveBackupUpdate | read-write | mandatory | Enable/Disable the update of the backup device from the active |
| 1.3.6.1.4.1.89.35.1.141 | ScalarrsWSDThroughputLicense | read-write | mandatory | The new licence for the device |
| 1.3.6.1.4.1.89.35.1.142 | ScalarrsWSDThroughputLicenseID | read-only | mandatory | License ID used for license downgrade |
| 1.3.6.1.4.1.89.35.1.143 | ScalarrsWSDThroughputLicenseIP | read-only | mandatory | License IP |
| 1.3.6.1.4.1.89.35.1.144 | ScalarrsWSDThroughputLicenseMethod | read-only | mandatory | License Method |
| 1.3.6.1.4.1.89.35.1.148 | NodersSSLCertificate | |||
| 1.3.6.1.4.1.89.35.1.148.1 | NodersSSLCertificateDefaultValues | |||
| 1.3.6.1.4.1.89.35.1.148.1.1 | ScalarrsSSLCertificateDefaultCommon | read-write | mandatory | default value for common field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.1.2 | ScalarrsSSLCertificateDefaultLocality | read-write | mandatory | default value for locality field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.1.3 | ScalarrsSSLCertificateDefaultStateOrProvince | read-write | mandatory | default value for state or province field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.1.4 | ScalarrsSSLCertificateDefaultOrganization | read-write | mandatory | default value for organization field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.1.5 | ScalarrsSSLCertificateDefaultOrganizationUnit | read-write | mandatory | default value for organization unit field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.1.6 | ScalarrsSSLCertificateDefaultCountryName | read-write | mandatory | default value for country name field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.1.7 | ScalarrsSSLCertificateDefaultEMail | read-write | mandatory | default value for e-mail field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.2 | TablersSSLCertificateTable | not-accessible | mandatory | The table for certificate handling |
| 1.3.6.1.4.1.89.35.1.148.2.1 | RowrsSSLCertificateEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.148.2.1.1 | ColumnrsSSLCertificateName | read-only | mandatory | The name of the certificate entry |
| 1.3.6.1.4.1.89.35.1.148.2.1.2 | ColumnrsSSLCertificateEntryType | read-write | mandatory | entry type |
| 1.3.6.1.4.1.89.35.1.148.2.1.3 | ColumnrsSSLCertificateKeySize | read-write | mandatory | key data size in bits |
| 1.3.6.1.4.1.89.35.1.148.2.1.4 | ColumnrsSSLCertificateKeyPassphrase | read-write | mandatory | password phrase to scramble key |
| 1.3.6.1.4.1.89.35.1.148.2.1.5 | ColumnrsSSLCertificateCommon | read-write | mandatory | value for common name field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.2.1.6 | ColumnrsSSLCertificateLocality | read-write | mandatory | value for locality field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.2.1.7 | ColumnrsSSLCertificateStateOrProvince | read-write | mandatory | value for state or province field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.2.1.8 | ColumnrsSSLCertificateOrganization | read-write | mandatory | value for organization field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.2.1.9 | ColumnrsSSLCertificateOrganizationUnit | read-write | mandatory | value for organization unit field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.2.1.10 | ColumnrsSSLCertificateCountryName | read-write | mandatory | value for country name field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.2.1.11 | ColumnrsSSLCertificateEMail | read-write | mandatory | value for e-mail field for certificate requests. |
| 1.3.6.1.4.1.89.35.1.148.2.1.12 | ColumnrsSSLCertificateExpiry | read-only | mandatory | expiry date according to certificate |
| 1.3.6.1.4.1.89.35.1.148.2.1.13 | ColumnrsSSLCertificateOCSPUrl | read-write | mandatory | OCSP url for client CA status validation |
| 1.3.6.1.4.1.89.35.1.148.2.1.14 | ColumnrsSSLCertificateStatus | read-write | mandatory | row status for certificate entry |
| 1.3.6.1.4.1.89.35.1.148.2.1.15 | ColumnrsSSLCertificateRequestedValidityPeriod | read-write | mandatory | validity period in days requested for self signed certificate |
| 1.3.6.1.4.1.89.35.1.148.2.1.16 | ColumnrsSSLCertificateValidFromDate | read-only | mandatory | valid from date according to certificate |
| 1.3.6.1.4.1.89.35.1.148.2.1.17 | ColumnrsSSLCertificateIssuer | read-only | mandatory | certificate's issuer |
| 1.3.6.1.4.1.89.35.1.148.2.1.18 | ColumnrsSSLCertificateSerialNumber | read-only | mandatory | certificate's serial number |
| 1.3.6.1.4.1.89.35.1.148.2.1.19 | ColumnrsSSLCertificateHasAlternativeNames | read-write | mandatory | does certificate has subject alternative names |
| 1.3.6.1.4.1.89.35.1.148.3 | NodersSSLCertificateImportExport | |||
| 1.3.6.1.4.1.89.35.1.148.3.1 | ScalarrsSSLCertificateImportExportEntryName | read-write | mandatory | entry name to be addressed. |
| 1.3.6.1.4.1.89.35.1.148.3.2 | ScalarrsSSLCertificateImportExportFileName | read-write | mandatory | file name path to export to or import from according to action. |
| 1.3.6.1.4.1.89.35.1.148.3.3 | ScalarrsSSLCertificateImportExportPassphrase | read-write | mandatory | Passphrase to be used when importing a key. |
| 1.3.6.1.4.1.89.35.1.148.3.4 | ScalarrsSSLCertificateImportExportAction | read-write | mandatory | Action to be performed on the entry name or file specified. |
| 1.3.6.1.4.1.89.35.1.150 | ScalarrdwrTemperatureCPU1Get | read-only | mandatory | get the temperature of CPU1 |
| 1.3.6.1.4.1.89.35.1.151 | ScalarrdwrTemperatureCPU2Get | read-only | mandatory | get the temperature of CPU2 |
| 1.3.6.1.4.1.89.35.1.152 | ScalarrdwrTemperatureWarningThresholdGet | read-only | mandatory | get the temperature warning threshold |
| 1.3.6.1.4.1.89.35.1.153 | ScalarrdwrTemperatureShutdownThresholdGet | read-only | mandatory | get the temperature shutdown threshold |
| 1.3.6.1.4.1.89.35.1.154 | ScalarrdwrTemperatureThresholdStatusCPU1Get | read-only | mandatory | get the threshold status of CPU1 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded |
| 1.3.6.1.4.1.89.35.1.155 | ScalarrdwrTemperatureThresholdStatusCPU2Get | read-only | mandatory | get the threshold status of CPU2 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded |
| 1.3.6.1.4.1.89.35.1.156 | ScalarrndNumberOfHD | read-only | mandatory | The number of hard drives. |
| 1.3.6.1.4.1.89.35.1.157 | ScalarrndSSLCardName | read-only | mandatory | The name of the SSL card. |
| 1.3.6.1.4.1.89.35.1.158 | ScalarrndCompCardName | read-only | mandatory | The name of the compression card. |
| 1.3.6.1.4.1.89.35.1.159 | NoderdwrHardDisk | |||
| 1.3.6.1.4.1.89.35.1.160 | NoderdwrHardDiskLogging | |||
| 1.3.6.1.4.1.89.35.1.161 | NoderdwrConfigurationSync | |||
| 1.3.6.1.4.1.89.35.1.162 | TablersSystemFansTable | not-accessible | mandatory | A table containing the fans status. |
| 1.3.6.1.4.1.89.35.1.162.1 | RowrsSystemFansEntry | not-accessible | mandatory | Information about a particular fan. |
| 1.3.6.1.4.1.89.35.1.162.1.1 | ColumnrsSystemFanIndex | read-only | mandatory | Fan Index. |
| 1.3.6.1.4.1.89.35.1.162.1.2 | ColumnrsSystemFansStatus | read-only | mandatory | Fan Status. |
| 1.3.6.1.4.1.89.35.1.163 | ScalarrdwrDualPsuStatus | read-only | mandatory | This variable represent the current status of the power supplies 0 - Single PowerSupply OK 1 - First PowerSupply Failed 2 - Second PowerSupply Failed 3 - Doubl… |
| 1.3.6.1.4.1.89.35.1.164 | TablersNetPortUtilizationTable | not-accessible | mandatory | Display the port Utilization. |
| 1.3.6.1.4.1.89.35.1.164.1 | RowrsNetPortUtilizationEntry | not-accessible | mandatory | An entry containing a single port utilization. |
| 1.3.6.1.4.1.89.35.1.164.1.1 | ColumnrsNetPortUtilizationIndex | read-only | mandatory | The ports index. |
| 1.3.6.1.4.1.89.35.1.164.1.2 | ColumnrsNetPortUtilizationEntryInUtil | read-only | mandatory | The inbound utilization in-packets/speed. |
| 1.3.6.1.4.1.89.35.1.164.1.3 | ColumnrsNetPortUtilizationEntryOutUtil | read-only | mandatory | The outbound utilization out-packets/speed. |
| 1.3.6.1.4.1.89.35.1.165 | TablersHWCPUTemperatureTable | not-accessible | mandatory | Display the CPU temperature. |
| 1.3.6.1.4.1.89.35.1.165.1 | RowrsHWCPUTemperatureEntry | not-accessible | mandatory | An entry containing a single CPU temperature. |
| 1.3.6.1.4.1.89.35.1.165.1.1 | ColumnrsHWCPUTemperatureIndex | read-only | mandatory | The CPU index. |
| 1.3.6.1.4.1.89.35.1.165.1.2 | ColumnrsHWCPUTemperatureValue | read-only | mandatory | The CPU temperature. |
| 1.3.6.1.4.1.89.35.1.166 | ScalarrdwrTotalIncomingTrafficPeak | read-only | mandatory | This variable represent the maximum incoming traffic in Mbps |
| 1.3.6.1.4.1.89.35.1.167 | TablersHWCoreUtilizationTable | not-accessible | mandatory | Display the device core utilization. |
| 1.3.6.1.4.1.89.35.1.167.1 | RowrsHWCoreUtilizationEntry | not-accessible | mandatory | An entry containing a single core utilization. |
| 1.3.6.1.4.1.89.35.1.167.1.1 | ColumnrsHWCoreUtilizationIndex | read-only | mandatory | The core index. |
| 1.3.6.1.4.1.89.35.1.167.1.2 | ColumnrsHWCoreUtilizationValue | read-only | mandatory | The core utilization. |
| 1.3.6.1.4.1.89.35.1.170 | NodersManagePro | |||
| 1.3.6.1.4.1.89.35.1.171 | ScalarrsUserLockoutInterval | read-write | mandatory | Lockout time interval for user account (min). Zero means no lockout. |
| 1.3.6.1.4.1.89.35.1.172 | ScalarrdwrManagmentPortsStatus | read-write | mandatory | Is management port enabled on the device |
| 1.3.6.1.4.1.89.35.1.173 | TablerdwrSyslogServerTable | not-accessible | mandatory | A table of syslog servers. |
| 1.3.6.1.4.1.89.35.1.173.1 | RowrdwrSyslogServerEntry | not-accessible | mandatory | An entry of the syslog servers table |
| 1.3.6.1.4.1.89.35.1.173.1.1 | ColumnrdwrSyslogServerAddress | read-write | mandatory | IP address of the syslog server. |
| 1.3.6.1.4.1.89.35.1.173.1.2 | ColumnrdwrSyslogServerStatus | read-write | mandatory | Server operational status. |
| 1.3.6.1.4.1.89.35.1.173.1.3 | ColumnrdwrSyslogServerSrcPort | read-write | mandatory | Server source port. |
| 1.3.6.1.4.1.89.35.1.173.1.4 | ColumnrdwrSyslogServerDstPort | read-write | mandatory | Server destination port. |
| 1.3.6.1.4.1.89.35.1.173.1.5 | ColumnrdwrSyslogServerFacility | read-write | mandatory | The SYSLOG Priority value is calculated by multiplying the Facility number by 8 and then adding the numerical value of the Severity. |
| 1.3.6.1.4.1.89.35.1.173.1.6 | ColumnrdwrSyslogServerProtocol | read-write | mandatory | The SYSLOG Protocol. |
| 1.3.6.1.4.1.89.35.1.173.1.7 | ColumnrdwrSyslogCACertificate | read-write | mandatory | CA Certificate of the syslog server. |
| 1.3.6.1.4.1.89.35.1.173.1.8 | ColumnrdwrSyslogServerRowStatus | read-write | mandatory | IP address of the syslog server. |
| 1.3.6.1.4.1.89.35.1.173.1.9 | ColumnrdwrSyslogServerConnectionStatus | read-write | mandatory | The SYSLOG Protocol. |
| 1.3.6.1.4.1.89.35.1.173.1.10 | ColumnrdwrSyslogServerNumberOfLogsInBackLog | read-write | mandatory | Number of logs in the backlog. |
| 1.3.6.1.4.1.89.35.1.173.1.11 | ColumnrdwrSyslogSecuritySending | read-write | mandatory | Security events sending status. |
| 1.3.6.1.4.1.89.35.1.173.1.12 | ColumnrdwrSyslogHealthSending | read-write | mandatory | Health events sending status. |
| 1.3.6.1.4.1.89.35.1.173.1.13 | ColumnrdwrSyslogUserAuditSending | read-write | mandatory | Audit events sending status. |
| 1.3.6.1.4.1.89.35.1.174 | ScalarrsWSDSyslogGlobalStatus | read-write | mandatory | Enable/Disable syslog message sending to remote station. |
| 1.3.6.1.4.1.89.35.1.175 | ScalarrsSendPortUnreachableStatus | read-write | mandatory | enable - send port unreachable (UDP) or reset (TCP) when port not available. disable - don't send a response, just discard the received packet. |
| 1.3.6.1.4.1.89.35.1.180 | NodersTacacsServer | |||
| 1.3.6.1.4.1.89.35.1.180.1 | ScalarrsTacacsPrimaryServerAddr | read-write | mandatory | Defines the primary TACACS+ server address. |
| 1.3.6.1.4.1.89.35.1.180.2 | ScalarrsTacacsPrimaryServerSecret | read-write | mandatory | Defines the shared secret between the switch and the primary TACACS+ server. |
| 1.3.6.1.4.1.89.35.1.180.3 | ScalarrsTacacsPrimaryServerPort | read-write | mandatory | The port on which the TACACS+ primary server listens. |
| 1.3.6.1.4.1.89.35.1.180.4 | ScalarrsTacacsSecondaryServerAddr | read-write | mandatory | Defines the secondary TACACS+ server address. |
| 1.3.6.1.4.1.89.35.1.180.5 | ScalarrsTacacsSecondaryServerSecret | read-write | mandatory | Defines the shared secret between the switch and the secondary TACACS+ server. |
| 1.3.6.1.4.1.89.35.1.180.6 | ScalarrsTacacsSecondaryServerPort | read-write | mandatory | The port on which the TACACS+ secondary server listens. |
| 1.3.6.1.4.1.89.35.1.180.7 | ScalarrsTacacsServerRetries | read-write | mandatory | Defines the number of failed authentication requests before switching to a different TACACS+ server. The default is 2 requests. |
| 1.3.6.1.4.1.89.35.1.180.8 | ScalarrsTacacsServerTimeout | read-write | mandatory | Defines the amount of time, in seconds, before a TACACS+ server authentication attempt is considered to have failed. The default is 1 second. |
| 1.3.6.1.4.1.89.35.1.180.9 | ScalarrsTacacsCommandLoggingStatus | read-write | mandatory | Enable/disable TACACS+ command logging. When enabled, device sends command log messages to TACACS+ server. |
| 1.3.6.1.4.1.89.35.1.180.10 | ScalarrsTacacsCommandAuthorizationStatus | read-write | mandatory | Enable/disable TACACS+ command authorization. |
| 1.3.6.1.4.1.89.35.1.180.11 | ScalarrsTacacsClientAging | read-write | mandatory | Number of seconds for which tacacs+ authentication and authorization replies are cached. During this time the device will use the cached response and not issue… |
| 1.3.6.1.4.1.89.35.1.181 | ScalarrsWSDResourceUtilizationInstance1 | read-only | mandatory | Resource Utilization of WSD on instance 1. Considers network utilization and internal CPU utilization |
| 1.3.6.1.4.1.89.35.1.182 | ScalarrsWSDREResourceUtilizationInstance1 | read-only | mandatory | Resource Utilization of network utilization on instance 1 |
| 1.3.6.1.4.1.89.35.1.183 | ScalarrsWSDRSResourceUtilizationInstance1 | read-only | mandatory | Resource Utilization of internal CPU utilization on instance 1 |
| 1.3.6.1.4.1.89.35.1.184 | Scalarrdwr5SecAvgResourceUtilizationInstance1 | read-only | mandatory | Average 5 seconds Resource Utilization of internal CPU utilization on instance 1 |
| 1.3.6.1.4.1.89.35.1.185 | Scalarrdwr60SecAvgResourceUtilizationInstance1 | read-only | mandatory | Average 60 seconds Resource Utilization of internal CPU utilization on instance 1 |
| 1.3.6.1.4.1.89.35.1.186 | ScalarrsFormFactor | read-write | mandatory | Show current platform type |
| 1.3.6.1.4.1.89.35.1.187 | ScalarrsAppAgPort | read-write | mandatory | Show current AppAG port number |
| 1.3.6.1.4.1.89.35.1.188 | ScalarrsAppAgIpAddress | read-write | mandatory | Show current AppAG IP Address |
| 1.3.6.1.4.1.89.35.1.189 | ScalarrsAppAgInstId | read-write | mandatory | Show current AppAG Instance Id |
| 1.3.6.1.4.1.89.35.1.190 | ScalarrsAppAGChannelIp | read-write | mandatory | The Management interface IP of the AppAG |
| 1.3.6.1.4.1.89.35.1.191 | ScalarrsAppAGChannelMask | read-write | mandatory | The Management interface netmask of the AppAG |
| 1.3.6.1.4.1.89.35.1.192 | ScalarrsAppAGChannelGw | read-write | mandatory | The Management interface GW IP of the AppAG |
| 1.3.6.1.4.1.89.35.1.193 | ScalarrsWSDVcpuLicense | read-write | mandatory | The vCPU licence |
| 1.3.6.1.4.1.89.35.1.194 | ScalarrsWSDVcpuLicenseID | read-only | mandatory | VCPU License ID used for license downgrade |
| 1.3.6.1.4.1.89.35.1.195 | ScalarrsWSDVcpuLicenseIP | read-only | mandatory | VCPU License IP |
| 1.3.6.1.4.1.89.35.1.196 | ScalarrsWSDVcpuLicenseMethod | read-only | mandatory | VCPU License Method |
| 1.3.6.1.4.1.89.35.1.197 | TablersSSLCertificateSANTable | not-accessible | mandatory | Table containing groups of filters. |
| 1.3.6.1.4.1.89.35.1.197.1 | RowrsSSLCertificateSANEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.1.197.1.1 | ColumnrsSSLCertificateEntryName | read-only | mandatory | The name of the group entry . |
| 1.3.6.1.4.1.89.35.1.197.1.2 | ColumnrsSSLCertificateEntrySANName | read-only | mandatory | The name of the subject alternate name entry in the group. |
| 1.3.6.1.4.1.89.35.1.197.1.3 | ColumnrsSSLCertificateEntrySANNameIndex | read-only | mandatory | The index of the subject alternate name in the array. |
| 1.3.6.1.4.1.89.35.1.197.1.4 | ColumnrsSSLCertificateEntrySANStatus | read-write | mandatory | The status of the object. |
| 1.3.6.1.4.1.89.35.1.198 | TablersLinkAggregationModeTable | not-accessible | mandatory | Table containing groups of filters. |
| 1.3.6.1.4.1.89.35.1.198.1 | RowrsLinkAggregationEntry | not-accessible | mandatory | Configure LAG port parameters. Where LAG is static or dynamic and thus controlled by LACP protocol. |
| 1.3.6.1.4.1.89.35.1.198.1.1 | ColumnrsLinkAggregationTrunkIndex | read-write | mandatory | Define the index of the LAG port. The device has a fixed number of 7 LAG ports. |
| 1.3.6.1.4.1.89.35.1.198.1.2 | ColumnrsLinkAggregationMode | read-write | mandatory | Define the wheter the LAG is static or dyanmic and thus contorlled by LACP protcol. |
| 1.3.6.1.4.1.89.35.1.198.1.3 | ColumnrsLinkAggregationTimeout | read-write | mandatory | Define whether the partner should work with fast or slow timeout. Fast timeout means that LCAPDU is sent by the partner every 1 second whereas slow timeout mea… |
| 1.3.6.1.4.1.89.35.1.198.1.4 | ColumnrsLinkAggregationStatus | read-write | mandatory | The status of the object. |
| 1.3.6.1.4.1.89.35.1.199 | ScalarrsLinkAggregationDynamicTrunksSupport | read-write | mandatory | Whether dynamic trunks (LACP) support is enabled or not |
| 1.3.6.1.4.1.89.35.1.200 | ScalarrsSysUtilControllerCpuWarningAlertStartThreshold | read-write | mandatory | Specifies the warning alert-start threshold for high utilization of the controller CPU |
| 1.3.6.1.4.1.89.35.1.201 | ScalarrsSysUtilControllerCpuWarningAlertStopThreshold | read-write | mandatory | Specifies the warning alert-stop threshold for high utilization of the controller CPU |
| 1.3.6.1.4.1.89.35.1.202 | ScalarrsSysUtilAnyEngineCpuWarningAlertStartThreshold | read-write | mandatory | Specifies the warning alert-start threshold for high utilization of any flow-engine CPU |
| 1.3.6.1.4.1.89.35.1.203 | ScalarrsSysUtilAnyEngineCpuWarningAlertStopThreshold | read-write | mandatory | Specifies the warning alert-stop threshold for high utilization of any flow-engine CPU |
| 1.3.6.1.4.1.89.35.1.204 | ScalarrsSysUtilControllerCpuErrorAlertStartThreshold | read-write | mandatory | Specifies the error alert-start threshold for high utilization of the controller CPU |
| 1.3.6.1.4.1.89.35.1.205 | ScalarrsSysUtilControllerCpuErrorAlertStopThreshold | read-write | mandatory | Specifies the error alert-stop threshold for high utilization of the controller CPU |
| 1.3.6.1.4.1.89.35.1.206 | ScalarrsSysUtilAnyEngineCpuErrorAlertStartThreshold | read-write | mandatory | Specifies the error alert-start threshold for high utilization of any flow-engine CPU |
| 1.3.6.1.4.1.89.35.1.207 | ScalarrsSysUtilAnyEngineCpuErrorAlertStopThreshold | read-write | mandatory | Specifies the error alert-stop threshold for high utilization of any flow-engine CPU |
| 1.3.6.1.4.1.89.35.1.208 | ScalarrsSysUtilCpuAlertsStatus | read-write | mandatory | CPU alerts status |
| 1.3.6.1.4.1.89.35.2 | NoderndMidLevelManagement | |||
| 1.3.6.1.4.1.89.35.2.2 | NoderndAlarmOptions | |||
| 1.3.6.1.4.1.89.35.2.2.1 | ScalarrndAlarmEnabling | read-write | mandatory | Indicates whether alarms should be issued to the high-level NMS |
| 1.3.6.1.4.1.89.35.2.2.2 | ScalarrndAlarmInterval | read-write | mandatory | Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again. |
| 1.3.6.1.4.1.89.35.2.3 | TablerndMonitoredElementsTable | not-accessible | mandatory | The table of monitored elements of the network |
| 1.3.6.1.4.1.89.35.2.3.1 | RowrndMonitoredElementEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.2.3.1.1 | ColumnrndMonitoredElementAddress | read-only | mandatory | The IP address of the monitored element |
| 1.3.6.1.4.1.89.35.2.3.1.2 | ColumnrndMonitoredElementCommunity | read-write | mandatory | The community of the monitored element |
| 1.3.6.1.4.1.89.35.2.3.1.3 | ColumnrndMonitoredElementLabel | read-write | mandatory | The label assigned by the network manager to the monitored element |
| 1.3.6.1.4.1.89.35.2.3.1.4 | ColumnrndDefaultPollingInterval | read-write | mandatory | The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is speci… |
| 1.3.6.1.4.1.89.35.2.3.1.5 | ColumnrndDefaultLogFile | read-write | mandatory | The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the m… |
| 1.3.6.1.4.1.89.35.2.3.1.6 | ColumnrndMonitoredElementStatus | read-write | mandatory | It is used to manage the monitored elements table and indicates the current monitoring status of an element. |
| 1.3.6.1.4.1.89.35.2.4 | TablerndMonitoringTable | not-accessible | mandatory | The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. |
| 1.3.6.1.4.1.89.35.2.4.1 | RowrndMonitoringEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.2.4.1.1 | ColumnrndMonitoredElement | read-only | mandatory | A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in… |
| 1.3.6.1.4.1.89.35.2.4.1.2 | ColumnrndMonitoredObjectInstanceLabel | read-only | mandatory | The label assigned by the network manager to the monitored object instance |
| 1.3.6.1.4.1.89.35.2.4.1.3 | ColumnrndMonitoredObjectName | read-write | mandatory | The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the … |
| 1.3.6.1.4.1.89.35.2.4.1.4 | ColumnrndMonitoredObjectIdentifier | read-write | mandatory | The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value,… |
| 1.3.6.1.4.1.89.35.2.4.1.5 | ColumnrndMonitoredObjectInstance | read-write | mandatory | The instance identifier (key) of the monitored object instance. |
| 1.3.6.1.4.1.89.35.2.4.1.6 | ColumnrndMonitoredObjectSyntax | read-write | mandatory | The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned a… |
| 1.3.6.1.4.1.89.35.2.4.1.7 | ColumnrndMonitoringInterval | read-write | mandatory | The period of time between two consecutive retrievals of the monitored object instance's value. |
| 1.3.6.1.4.1.89.35.2.4.1.8 | ColumnrndAlarmMaxTreshold | read-write | mandatory | The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station. |
| 1.3.6.1.4.1.89.35.2.4.1.9 | ColumnrndAlarmMinTreshold | read-write | mandatory | If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issu… |
| 1.3.6.1.4.1.89.35.2.4.1.10 | ColumnrndMonitoringLogfile | read-write | mandatory | The entire path of the file in which the results of the monitoring of this object instance should be recorded. |
| 1.3.6.1.4.1.89.35.2.4.1.11 | ColumnrndMonitoringEntryStatus | read-write | mandatory | It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance. |
| 1.3.6.1.4.1.89.35.2.5 | TablerndMibFilesTable | not-accessible | mandatory | The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. |
| 1.3.6.1.4.1.89.35.2.5.1 | RowrndMibFileEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.2.5.1.1 | ColumnrndMibFileIndex | read-only | mandatory | The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IM… |
| 1.3.6.1.4.1.89.35.2.5.1.2 | ColumnrndMibFilePath | read-write | mandatory | The path of the MIB file in the MIB file server. |
| 1.3.6.1.4.1.89.35.2.5.1.3 | ColumnrndMibFileRefresh | read-write | mandatory | Indicates if the file should be fetched after setting this entry from the MIB file server. |
| 1.3.6.1.4.1.89.35.2.5.1.4 | ColumnrndMibFileEntryStatus | read-write | mandatory | It is used to manage the MIB files table. |
| 1.3.6.1.4.1.89.35.2.6 | ScalarrndHardwareConfiguration | read-write | mandatory | Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level managem… |
| 1.3.6.1.4.1.89.35.2.7 | ScalarrndEraseSimulatedConfiguration | read-write | mandatory | eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value f… |
| 1.3.6.1.4.1.89.35.2.8 | TablerndDeleteValuesTable | not-accessible | mandatory | This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (int… |
| 1.3.6.1.4.1.89.35.2.8.1 | RowrndDeleteValuesEntry | not-accessible | mandatory | The row definition for the rndDeleteValuesTable table. |
| 1.3.6.1.4.1.89.35.2.8.1.1 | ColumnrndRowStatusVariableName | read-write | mandatory | The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station. |
| 1.3.6.1.4.1.89.35.2.8.1.2 | ColumnrndRowStatusObjectId | read-write | mandatory | The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, … |
| 1.3.6.1.4.1.89.35.2.8.1.3 | ColumnrndRowDeleteValue | read-write | mandatory | The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of t… |
| 1.3.6.1.4.1.89.35.2.8.1.4 | ColumnrndDeleteValueEntryStatus | read-write | mandatory | It is used to delete an entry from this table. |
| 1.3.6.1.4.1.89.35.2.9 | NoderndVisionDriver | |||
| 1.3.6.1.4.1.89.35.2.9.1 | ScalarrndVisionDriverActiveName | read-only | mandatory | The name of the active vision driver stored on the device. |
| 1.3.6.1.4.1.89.35.2.9.2 | ScalarrndVisionDriverRestoreFromBackup | read-write | mandatory | Restores the backup vision driver |
| 1.3.6.1.4.1.89.35.2.10 | NoderndSmartFan | |||
| 1.3.6.1.4.1.89.35.2.10.1 | ScalarrndSmartFanStatus | read-write | mandatory | Smart Fan Status |
| 1.3.6.1.4.1.89.35.3 | NodersIpZeroHopRouting | |||
| 1.3.6.1.4.1.89.35.3.1 | ScalarrsIpZhrGeneralStatus | read-write | mandatory | This parameter enables or disables the IP Zero Hop Routing feature for all IP interfaces. The IP Zero Hop Routing feature can also be enabled or disabled on ea… |
| 1.3.6.1.4.1.89.35.3.2 | ScalarrsIpZhrAgingTimeout | read-write | mandatory | This parameter controls the aging time-out in seconds of direct connections which were allocated. The virtual IP address of a direct connection whose time-out … |
| 1.3.6.1.4.1.89.35.3.3 | TablersIpZhrStatusTable | not-accessible | mandatory | The administrative status of the ZHR feature per ip interface. |
| 1.3.6.1.4.1.89.35.3.3.1 | RowrsIpZhrStatusEntry | not-accessible | mandatory | An entry in the ZHR status table. |
| 1.3.6.1.4.1.89.35.3.3.1.1 | ColumnrsIpZhrStatusIpIntf | read-only | mandatory | The Ip interface whose ZHR feature status is accessed. |
| 1.3.6.1.4.1.89.35.3.3.1.2 | ColumnrsIpZhrAdminStatus | read-write | mandatory | It is used to control whether ZHR will operate on the interface. |
| 1.3.6.1.4.1.89.35.3.4 | TablersIpZhrVirtAddressTable | not-accessible | mandatory | The table of free virtual IP addresses which may be allocated to establish direct connections - Per IP Interface. |
| 1.3.6.1.4.1.89.35.3.4.1 | RowrsIpZhrVirtAddressEntry | not-accessible | mandatory | An entry in the ZHR virtual IP addresses table |
| 1.3.6.1.4.1.89.35.3.4.1.1 | ColumnrsIpZhrVirtAddressIpIntf | read-only | mandatory | The Ip Interface to which the IP addresses in this entry are allocated. |
| 1.3.6.1.4.1.89.35.3.4.1.2 | ColumnrsIpZhrVirtAddressTo | read-only | mandatory | The last free IP address in the block. |
| 1.3.6.1.4.1.89.35.3.4.1.3 | ColumnrsIpZhrVirtAddressFrom | read-write | mandatory | The first free IP address in the block. |
| 1.3.6.1.4.1.89.35.3.4.1.4 | ColumnrsIpZhrVirtAddressStatus | read-write | mandatory | It is used to manage the virtual address table. The supported actions will be active, createAndGo and destroy. |
| 1.3.6.1.4.1.89.35.3.5 | TablersIpZhrConnectionsTable | not-accessible | mandatory | Table of the currently active direct connections. |
| 1.3.6.1.4.1.89.35.3.5.1 | RowrsIpZhrConnectionEntry | not-accessible | mandatory | An entry in the ZHR Connection table |
| 1.3.6.1.4.1.89.35.3.5.1.1 | ColumnrsIpZhrConnectionIpIntf | read-only | mandatory | The IP Interface for which this direct connection was established. |
| 1.3.6.1.4.1.89.35.3.5.1.2 | ColumnrsIpZhrConnectionSrcIp | read-only | mandatory | The source IP Address of this direct connection. |
| 1.3.6.1.4.1.89.35.3.5.1.3 | ColumnrsIpZhrConnectionDestIp | read-only | mandatory | The destination IP Address of this direct connection. |
| 1.3.6.1.4.1.89.35.3.5.1.4 | ColumnrsIpZhrConnectionVirtualIp | read-only | mandatory | The virtual IP address allocated for this direct connection. |
| 1.3.6.1.4.1.89.35.3.5.1.5 | ColumnrsIpZhrConnectionType | read-only | mandatory | The type of this direct connection. dynamic - established by the RS. disabled - established by the RS. The RS detected that the virtual address is already used… |
| 1.3.6.1.4.1.89.35.3.5.1.6 | ColumnrsIpZhrConnectionAge | read-only | mandatory | The age of the connection in seconds. |
| 1.3.6.1.4.1.89.35.3.5.1.7 | ColumnrsIpZhrConnectionStatus | read-write | mandatory | It is used to manage the connections table. The supported actions will be active, createAndGo and destroy. |
| 1.3.6.1.4.1.89.36 | NodeipxRipTblOverflow | This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity… | ||
| 1.3.6.1.4.1.89.37 | NodeipxSapTblOverflow | This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity… | ||
| 1.3.6.1.4.1.89.49 | NodefacsAccessVoilation | This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface.The bound variable rndErrorDesc, rndErrorS… | ||
| 1.3.6.1.4.1.89.50 | NodeautoConfigurationCompleted | This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info ) | ||
| 1.3.6.1.4.1.89.51 | NodeforwardingTabOverflow | This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning ) | ||
| 1.3.6.1.4.1.89.61 | NodeerrorsDuringInit | |||
| 1.3.6.1.4.1.89.66 | NodevlanDynPortAdded | |||
| 1.3.6.1.4.1.89.67 | NodevlanDynPortRemoved | |||
| 1.3.6.1.4.1.89.68 | NodersSDclientsTableOverflow | This warning is generated when an overflow occurs in the clients table. | ||
| 1.3.6.1.4.1.89.69 | NodersSDinactiveServer | This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive. | ||
| 1.3.6.1.4.1.89.70 | NodersIpZhrConnectionsTableOverflow | The Zero Hop Routing connections Table has been overflown. | ||
| 1.3.6.1.4.1.89.71 | NodersIpZhrReqStaticConnNotAccepted | The requested static connection was not accepted because there is no available IP virtual address to allocate to it. | ||
| 1.3.6.1.4.1.89.72 | NodersIpZhrVirtualIpAsSource | The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections. | ||
| 1.3.6.1.4.1.89.73 | NodersIpZhrNotAllocVirtualIp | The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this… | ||
| 1.3.6.1.4.1.89.74 | NodersSnmpSetRequestInSpecialCfgState | An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during s… | ||
| 1.3.6.1.4.1.89.75 | NodersConfigurationAuditEvent | Triggered by an audit event. | ||
| 1.3.6.1.4.1.89.76 | NoderdwrFanNotWorking | Triggered by fan failure. | ||
| 1.3.6.1.4.1.89.77 | NoderdwrFanInfo | Triggered by fan information. | ||
| 1.3.6.1.4.1.89.78 | NoderdwrCertExpiration | Certificate expiration notification. | ||
| 1.3.6.1.4.1.89.79 | NodecdeResyncronizing | Config Sync primary device Resyncronize with secondary device. | ||
| 1.3.6.1.4.1.89.80 | NodecdeCannotSync | Config Sync Cannot sync. | ||
| 1.3.6.1.4.1.89.81 | NodecdeConnected | Config Sync primary device Connected to secondary device | ||
| 1.3.6.1.4.1.89.82 | NodecdeConfigUpdateFailed | Config Sync primary device Failed to update the secondary device with a specific change. | ||
| 1.3.6.1.4.1.89.83 | NodecdeSlaveReboot | Config Sync primary device Send reboot command to the secondary device | ||
| 1.3.6.1.4.1.89.84 | NodecdeSlaveRebootFailed | Config Sync Secondary Device Reboot has failed. | ||
| 1.3.6.1.4.1.89.85 | NodecdeEnterOutOfSync | Config Sync enters out-of-sync state. | ||
| 1.3.6.1.4.1.89.86 | NodecdeSlaveRebootPending | Config Sync Secondary Device Reboot is pending. | ||
| 1.3.6.1.4.1.89.87 | NodecdeDisconnected | Config Sync enters disconnected state. | ||
| 1.3.6.1.4.1.89.88 | NodecdeInSync | Config Sync enters in-sync state. | ||
| 1.3.6.1.4.1.89.89 | NodecdeIncompatible | Config Sync enters incompatible state. | ||
| 1.3.6.1.4.1.89.90 | NodecdeNoMaster | Config Sync enters no-master state. | ||
| 1.3.6.1.4.1.89.91 | NodecdeMasterConnected | Config Sync enters master-connected state. | ||
| 1.3.6.1.4.1.89.92 | NodediagnosticCapture | Diagnostic Caputre related information traps. | ||
| 1.3.6.1.4.1.89.93 | NodecontrollerDisabledAppsec | Controller Disabled Appsec related traps. | ||
| 1.3.6.1.4.1.89.94 | NodevcpuLicenseTrap | Vcpu License related traps. | ||
| 1.3.6.1.4.1.89.95 | NodesslNetworkPolicies | PSSLO delete disable related traps. | ||
| 1.3.6.1.4.1.89.96 | NodersIDSslPssoWithoutCertificateTrap | Protected Server without certificate is now disabled | ||
| 1.3.6.1.4.1.89.97 | NodersIDinterfaceGroupDownInfo | Interface group port is now disabled | ||
| 1.3.6.1.4.1.89.98 | NodeaccessListBuildError | Accesslist build failed. Using previous configuration. | ||
| 1.3.6.1.4.1.89.99 | NodersPortStatusChangedLACPInfo | Indicates when physical port belongs or not to the trunk based on LACP. | ||
| 1.3.6.1.4.1.89.100 | NodeantiscanUtilizationAboveInfoTrap | Antiscan table utilziation info. | ||
| 1.3.6.1.4.1.89.101 | NodeantiscanUtilizationBelowInfoTrap | Antiscan table utilziation info. | ||
| 1.3.6.1.4.1.89.102 | NodersDPCACPUDataReadFailure | DPCA CPU Data Read Failure | ||
| 1.3.6.1.4.1.89.103 | NodersDPCACPUUtilExceededWarningStartThresh | DPCA CPU Util Exceeded Warning Start Thresh | ||
| 1.3.6.1.4.1.89.104 | NodersDPCACPUUtilDecreasedBelowWarningStopThresh | DPCA CPU Util Decreased Below Warning Stop Thresh | ||
| 1.3.6.1.4.1.89.105 | NodersEngCPUUtilExceededWarningStartThresh | Eng CPU Util Exceeded Warning Start Thresh | ||
| 1.3.6.1.4.1.89.106 | NodersEngCPUUtilDecreasedBelowWarningStopThresh | Eng CPU Util Decreased Below Warning Stop Thresh | ||
| 1.3.6.1.4.1.89.107 | NodersDPCACPUUtilExceededErrorStartThresh | DPCA CPU Util Exceeded Error Start Thresh | ||
| 1.3.6.1.4.1.89.108 | NodersDPCACPUUtilDecreasedBelowErrorStopThresh | DPCA CPU Util Decreased Below Error Stop Thresh | ||
| 1.3.6.1.4.1.89.109 | NodersEngCPUUtilExceededErrorStartThresh | Eng CPU Util Exceeded Error Start Thresh | ||
| 1.3.6.1.4.1.89.110 | NodersEngCPUUtilDecreasedBelowErrorStopThresh | Eng CPU Util Decreased Below Error Stop Thresh | ||
| 1.3.6.1.4.1.89.141 | NodersWSDRedundancySwitch | Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued. | ||
| 1.3.6.1.4.1.89.142 | NodeaxConfigFailed | Failed to configure the on-device SSL engine. SSL decryption and encryption is disabled. | ||
| 1.3.6.1.4.1.89.143 | NodetrafficFiltersRulesError | Traffic filters rules traps issues. |