MIB Viewer

RAISECOM-FANMONITOR-MIB

26 objects
Configuration of fanMonitor object.
Imported Objects
RAISECOM-SYSTEM-MIBraisecomSystem
SNMPv2-SMICounter32 Integer32 Unsigned32
SNMPv2-TCTruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.8886.1.1.5IdentityraisecomFanMonitorConfiguration of fanMonitor object.
1.3.6.1.4.1.8886.1.1.5.1NoderaisecomFanMonitorNotification
1.3.6.1.4.1.8886.1.1.5.1.1NotificationraisecomFanSpeedNormalcurrentThe trap notification occur when fan state translating from abnormal to normal.
1.3.6.1.4.1.8886.1.1.5.1.2NotificationraisecomFanSpeedAbnormalcurrentThe trap notification occur when fan state translatingfrom normal to abnormal.
1.3.6.1.4.1.8886.1.1.5.1.3NotificationraisecomFanCardUpcurrentThe trap notification occur when fan card state translating from down to up.
1.3.6.1.4.1.8886.1.1.5.1.4NotificationraisecomFanCardDowncurrentThe trap notification occur when fan card state translating from up to down.
1.3.6.1.4.1.8886.1.1.5.2NoderaisecomFanMonitorMibObjects
1.3.6.1.4.1.8886.1.1.5.2.1NoderaisecomFanMonitorGlobalGroup
1.3.6.1.4.1.8886.1.1.5.2.1.1ScalarraisecomFanMonitorModeread-writecurrentAn integer value that specify the current monitor mode. ENFORCE(1) means that the fan speed need to set manully; AUTO(2) means that the fan speed will ajusted …
1.3.6.1.4.1.8886.1.1.5.2.1.2ScalarraisecomFanMonitorSpdLevelread-writecurrentSpecify the speed level of fan in enforce mode.
1.3.6.1.4.1.8886.1.1.5.2.1.3ScalarraisecomFanMonitorNumberread-onlycurrentSpecify the number of fan being monitorred.
1.3.6.1.4.1.8886.1.1.5.2.1.4ScalarraisecomFanMonitorLevlNumberread-onlycurrentSpecify the total number of fan speed levels.
1.3.6.1.4.1.8886.1.1.5.2.1.5ScalarraisecomFanCardStateread-onlycurrentSpecify the current state of fan cards. all_down(1) means that all fan cards are down; all_up(2) means that all fan cards are up; card1_up(3) means that fan ca…
1.3.6.1.4.1.8886.1.1.5.2.1.6ScalarraisecomFanCardSerialNumberread-onlycurrentspecify the identical serial number of current fan card,this string number will be set when device leaving factory
1.3.6.1.4.1.8886.1.1.5.2.1.7ScalarraisecomFanMonitorTrapSendEnableread-writecurrentSpecifies the status of sending trap
1.3.6.1.4.1.8886.1.1.5.2.2TableraisecomFanMonitorStateTablenot-accessiblecurrentFan monitor state table.
1.3.6.1.4.1.8886.1.1.5.2.2.1RowraisecomFanMonitorStateEntrynot-accessiblecurrentFan monitor state entry.
1.3.6.1.4.1.8886.1.1.5.2.2.1.1ColumnraisecomFanIndexnot-accessiblecurrentSpecify the sequence number of fan.
1.3.6.1.4.1.8886.1.1.5.2.2.1.2ColumnraisecomFanSpeedValueread-onlycurrentSpecify the actural speed of the current fan.
1.3.6.1.4.1.8886.1.1.5.2.2.1.3ColumnraisecomFanWorkStateread-onlycurrentSpecify the current state of fan normal(1) means the current fan operate normally; abnormal(2) means the current fan operate abnormally
1.3.6.1.4.1.8886.1.1.5.2.2.1.4ColumnraisecomFanSpeedCurrentLevelread-onlycurrentSpecify the temperature scale border that match the speed levle, based on this scale border,the current fan speed will ajusted autoly according to the current …
1.3.6.1.4.1.8886.1.1.5.2.3TableraisecomFanSpeedLevelTablenot-accessiblecurrentfan speed level information table.
1.3.6.1.4.1.8886.1.1.5.2.3.1RowraisecomFanSpeedLevelEntrynot-accessiblecurrentfan speed level information entry.
1.3.6.1.4.1.8886.1.1.5.2.3.1.1ColumnraisecomFanSpeedLevelIndexnot-accessiblecurrentSpecify the fan speed level index.
1.3.6.1.4.1.8886.1.1.5.2.3.1.2ColumnraisecomFanSpeedDueValueread-onlycurrentSpecify the speed value that match the fan levle index. this value can ben get from a new or normal fan ,not an used fan ,because the used fan may be aged
1.3.6.1.4.1.8886.1.1.5.2.3.1.3ColumnraisecomFanSpeedTemperatureScaleread-writecurrentSpecify the temperature scale border that match the speed levle, based on this scale border,the current fan speed will ajusted autoly according to the current …
MIB Viewer