RAISECOM-OPTICAL-MONITOR-MIB
59 objects
This MIB module defines objects to monitor optical characteristics on the optical interfaces in a network element.
Imported Objects
| IF-MIB | ifIndex |
| RAISECOM-BASE-MIB | raisecomAgent |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| SWITCH-TC | EnableVar |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8886.1.9 | IdentityraisecomOpticalMonitorMIB | This MIB module defines objects to monitor optical characteristics on the optical interfaces in a network element. | ||
| 1.3.6.1.4.1.8886.1.9.1 | NoderaisecomOpticalMonitorMIBObjects | |||
| 1.3.6.1.4.1.8886.1.9.1.1 | NoderaisecomOpticalMonGroup | |||
| 1.3.6.1.4.1.8886.1.9.1.1.1 | TableraisecomOpticalMonTable | not-accessible | current | This table provides objects to monitor optical parameters in a network element. |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1 | RowraisecomOpticalMonEntry | not-accessible | current | An entry in the raisecomOpticalMonTable provides objects to monitor an optical parameter at an optical interface. |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.1 | ColumnraisecomOpticalMonParameterType | not-accessible | current | This object specifies the optical parameter that is being monitored in this entry. |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.2 | ColumnraisecomOpticalParameterValue | read-only | current | This object gives the value measured for the particular optical parameter specified by the raisecomOpticalMonParameterType object. |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.3 | ColumnraisecomOpticalParamHighAlarmThresh | read-only | current | This object gives the high alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalPar… |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.4 | ColumnraisecomOpticalParamHighWarningThresh | read-only | current | This object is used to set a high warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value giv… |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.5 | ColumnraisecomOpticalParamLowAlarmThresh | read-only | current | This object is used to set a low alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpti… |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.6 | ColumnraisecomOpticalParamLowWarningThresh | read-only | current | This object is used to set a low warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value give… |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.7 | ColumnraisecomOpticalParamAlarmStatus | read-only | current | This object is used to indicate the current status of the thresholds for the monitored optical parameter on the interface. If a threshold is currently being ex… |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.8 | ColumnraisecomOpticalParamAlarmLastValue | read-only | current | This object indicates the optical parameter value at the last time a threshold related to a particular optical parameter was exceeded on the interface. If no t… |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.9 | ColumnraisecomOpticalParamAlarmLastChange | read-only | current | This object specifies the value of sysUpTime at the last time a threshold related to a particular optical parameter was exceeded on the interface. |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.10 | ColumnraisecomOpticalMon15MinValidIntervals | read-only | current | This object gives the number of previous 15 minute intervals for which valid performance monitoring data has been stored on the interface. The value of this ob… |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.11 | ColumnraisecomOpticalMon24HrValidIntervals | read-only | current | This object gives the number of previous 24 hour intervals for which valid performance monitoring data has been stored on the interface. The value of this obje… |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.12 | ColumnraisecomOpticalMonValidStatus | read-only | current | This object indicates the parameter row is valid or not. |
| 1.3.6.1.4.1.8886.1.9.1.1.2 | ScalarraisecomOpticalNotifyEnable | read-write | current | This object specifies the generation of raisecomOpticalMonParameterStatus notifications. |
| 1.3.6.1.4.1.8886.1.9.1.1.3 | ScalarraisecomOpticalDigitalDiagnoticEnable | read-write | current | Enable or disable digitaldiagnotic on the switch. |
| 1.3.6.1.4.1.8886.1.9.1.2 | NoderaisecomOpticalPMGroup | |||
| 1.3.6.1.4.1.8886.1.9.1.2.1 | TableraisecomOpticalPMCurrentTable | not-accessible | current | This table contains performance monitoring data for the various optical parameters, collected over the current 15 minute or the current 24 hour interval. |
| 1.3.6.1.4.1.8886.1.9.1.2.1.1 | RowraisecomOpticalPMCurrentEntry | not-accessible | current | An entry in the raisecomOpticalPMCurrentTable. It contains performance monitoring data for a monitored optical parameter at an interface, collected over the cu… |
| 1.3.6.1.4.1.8886.1.9.1.2.1.1.1 | ColumnraisecomOpticalPMCurrentPeriod | not-accessible | current | This object indicates whether the optical parameter values given in this entry are collected over the current 15 minute or the current 24 hour interval. |
| 1.3.6.1.4.1.8886.1.9.1.2.1.1.2 | ColumnraisecomOpticalPMCurrentParamType | not-accessible | current | This object specifies the optical parameter that is being monitored, in this entry. |
| 1.3.6.1.4.1.8886.1.9.1.2.1.1.3 | ColumnraisecomOpticalPMCurrentMaxParam | read-only | current | This object gives the maximum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval. |
| 1.3.6.1.4.1.8886.1.9.1.2.1.1.4 | ColumnraisecomOpticalPMCurrentMinParam | read-only | current | This object gives the minimum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval. |
| 1.3.6.1.4.1.8886.1.9.1.2.1.1.5 | ColumnraisecomOpticalPMCurrentMeanParam | read-only | current | This object gives the average value of the monitored optical parameter, in the current 15 minute or the current 24 hour interval. |
| 1.3.6.1.4.1.8886.1.9.1.2.2 | TableraisecomOpticalPMIntervalTable | not-accessible | current | This table stores performance monitoring data for the various optical parameters, collected over previous intervals. This table can have entries for one comple… |
| 1.3.6.1.4.1.8886.1.9.1.2.2.1 | RowraisecomOpticalPMIntervalEntry | not-accessible | current | An entry in the raisecomOpticalPMIntervalTable. It contains performance monitoring data for an optical parameter, collected over a previous interval. |
| 1.3.6.1.4.1.8886.1.9.1.2.2.1.1 | ColumnraisecomOpticalPMIntervalPeriod | not-accessible | current | This object indicates whether the optical parameter values, given in this entry, are collected over a period of 15 minutes or 24 hours. |
| 1.3.6.1.4.1.8886.1.9.1.2.2.1.2 | ColumnraisecomOpticalPMIntervalNumber | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of optical parameter values is available. The interval identified by 1 is the most r… |
| 1.3.6.1.4.1.8886.1.9.1.2.2.1.3 | ColumnraisecomOpticalPMIntervalParamType | not-accessible | current | This object specifies the optical parameter that is being monitored, in this entry. |
| 1.3.6.1.4.1.8886.1.9.1.2.2.1.4 | ColumnraisecomOpticalPMIntervalMaxParam | read-only | current | This object gives the maximum value measured for the optical parameter, in a particular 15 minute or 24 hour interval. |
| 1.3.6.1.4.1.8886.1.9.1.2.2.1.5 | ColumnraisecomOpticalPMIntervalMinParam | read-only | current | This object gives the minimum value measured for the optical parameter, in a particular 15 minute or 24 hour interval. |
| 1.3.6.1.4.1.8886.1.9.1.2.2.1.6 | ColumnraisecomOpticalPMIntervalMeanParam | read-only | current | This object gives the average value of the measured optical parameter, in a particular 15 minute or 24 hour interval. |
| 1.3.6.1.4.1.8886.1.9.1.4 | TableraisecomTranceiverInfoTable | not-accessible | current | Trancetver information Table. |
| 1.3.6.1.4.1.8886.1.9.1.4.1 | RowraisecomTranceiverInfoEntry | not-accessible | current | An entry in the raisecomSfpAccessA0Table. |
| 1.3.6.1.4.1.8886.1.9.1.4.1.1 | ColumnraisecomTranceiverType | read-only | current | Type of the interface, such as 1000_BASE_SX_SFP |
| 1.3.6.1.4.1.8886.1.9.1.4.1.2 | ColumnraisecomTranceiverConnectorType | read-only | current | ConnectorType of the interface, such as SC/LC |
| 1.3.6.1.4.1.8886.1.9.1.4.1.3 | ColumnraisecomTranceiverWavelength | read-only | current | Wavelength of the interface, measured in nm. |
| 1.3.6.1.4.1.8886.1.9.1.4.1.4 | ColumnraisecomTranceiverVendorName | read-only | current | Vendor name of the interface. |
| 1.3.6.1.4.1.8886.1.9.1.4.1.5 | ColumnraisecomTranceiverVendorPN | read-only | current | Vendor part number of the interface. |
| 1.3.6.1.4.1.8886.1.9.1.4.1.6 | ColumnraisecomTranceiverVendorSN | read-only | current | Vendor serial number of the interface. |
| 1.3.6.1.4.1.8886.1.9.1.4.1.7 | ColumnraisecomTransceiverFiberType | read-only | current | Types of the fiber, single_mode, multi_mode, none. |
| 1.3.6.1.4.1.8886.1.9.1.4.1.8 | ColumnraisecomTransceiverTransferDistance | read-only | current | The max distance which the interface could transmit, measured in meter. |
| 1.3.6.1.4.1.8886.1.9.2 | NoderaisecomOpticalMonitorMIBNotifications | |||
| 1.3.6.1.4.1.8886.1.9.2.1 | NotificationraisecomOpticalMonParameterStatus | current | This notification is sent when any threshold related to an optical parameter is exceeded on an interface. This notification may be suppressed under the followi… | |
| 1.3.6.1.4.1.8886.1.9.3 | NoderaisecomOpticalMonitorMIBConformance | |||
| 1.3.6.1.4.1.8886.1.9.3.1 | NoderaisecomOpticalMonitorMIBCompliances | |||
| 1.3.6.1.4.1.8886.1.9.3.1.1 | ComplianceraisecomOpticalMonitorMIBCompliance | read-only | current | The compliance statement for network elements that monitor optical characteristics and thresholds on the optical interfaces in a network element. |
| 1.3.6.1.4.1.8886.1.9.3.2 | NoderaisecomOpticalMonitorMIBGroups | |||
| 1.3.6.1.4.1.8886.1.9.3.2.1 | GroupraisecomOpticalMIBMonGroup | current | A mandatory object that provides monitoring of optical characteristics. | |
| 1.3.6.1.4.1.8886.1.9.3.2.2 | GroupraisecomOpticalMIBThresholdGroup | current | A collection of objects that support thresholds on optical parameters and provide status information when the thresholds are exceeded . | |
| 1.3.6.1.4.1.8886.1.9.3.2.3 | GroupraisecomOpticalMIBPMGroup | current | A collection of objects that provide optical performance monitoring data for 15 minute and 24 hour intervals. | |
| 1.3.6.1.4.1.8886.1.9.3.2.4 | GroupraisecomOpticalMIBNotifyEnableGroup | current | An object to control the generation of notifications. | |
| 1.3.6.1.4.1.8886.1.9.3.2.5 | GroupraisecomOpticalMIBNotifGroup | current | A notification generated when a threshold on an optical parameter is exceeded or cleared. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OpticalParameterType | INTEGER { temperature(1), supplyVoltage(2), biasCurrent(3), txOutputPower(4), receivedPower(5) } | current | This value indicates the optical parameter that is being monitored. Valid values are - temperature(1) supplyVoltage(2) biasCurrent(3) txOutputPower(4) receivedPower(5) |
| OpticalParameterValue | Integer32 (-1000000..65535 ) | current | The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalParameterType… |
| OpticalPMPeriod | INTEGER { fifteenMin(1), twentyFourHour(2) } | current | This value indicates the time period over which performance monitoring data has been collected. |