RAISECOM-OPTICAL-TRANSCEIVER-MIB
188 objects
This MIB module defines objects to monitor optical characteristics on the optical interfaces in a network element.
Imported Objects
| IF-MIB | ifIndex |
| RAISECOM-BASE-MIB | raisecomAgent |
| RAISECOM-COMMON-MANAGEMENT-MIB | raisecomNotificationLocation |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| SWITCH-TC | ClearVar |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8886.1.18 | IdentityraisecomOpticalTransceiver | This MIB module defines objects to monitor optical characteristics on the optical interfaces in a network element. | ||
| 1.3.6.1.4.1.8886.1.18.1 | NoderaisecomOpticalTransceiverGlobalEnable | |||
| 1.3.6.1.4.1.8886.1.18.1.1 | ScalarraisecomOpticalTransceiverNotifyEnable | read-write | current | This object specifies the generation of device notifications, enable or disable. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.1.2 | ScalarraisecomOpticalTransceiverDDMEnable | read-write | current | Enable or disable digitaldiagnotic on the device. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.1.3 | ScalarraisecomOpticalTransceiverCheckPwdEnable | read-write | current | This object specifies the status of password checking on the device, enable or disable. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.1.4 | ScalarraisecomOpticalTransceiverPollInterval | read-write | current | This object specifies the value of poll-interval on the device. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2 | NoderaisecomOpticalTransceiverObjects | |||
| 1.3.6.1.4.1.8886.1.18.2.1 | NoderaisecomOpticalTransceiverInfoGroup | |||
| 1.3.6.1.4.1.8886.1.18.2.1.1 | TableraisecomOpticalTransceiverInfoTable | not-accessible | current | Trancetver information Table. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1 | RowraisecomOpticalTransceiverInfoEntry | not-accessible | current | An entry in the raisecomOpticalTransceiverInfoTable. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.1 | ColumnraisecomOpticalTransceiverType | read-only | current | This object specifies the physical type of the transceiver, such as xfp or sfp , and so on. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.2 | ColumnraisecomOpticalTransceiverConnectorType | read-only | current | This object specifies the connector type of the transceiver�� unknown, sc, db9, hssdc, bnc_tnc, fiber_coaxial_head, fiber_outlet, lc, mt_rj, mu, sg, fiber_… |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.3 | ColumnraisecomOpticalTransceiverVendorName | read-only | current | Vendor name of the interface. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.4 | ColumnraisecomOpticalTransceiverVendorPN | read-only | current | Vendor part number of the interface. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.5 | ColumnraisecomOpticalTransceiverVendorSN | read-only | current | Vendor serial number of the interface. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.6 | ColumnraisecomOpticalTransceiverMediaType | read-only | current | Types of the fiber, single_mode, multi_modeE50, multi_mode50,multi_mode625,copper. single_modeKm,multi_modeOM3 this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.7 | ColumnraisecomOpticalTransceiverTransmissionDistance | read-only | current | The max distance which the interface could transmit, measured in meter. The object will be shown in unit of Km, and the precision is 0.001. this object belongs… |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.8 | ColumnraisecomOpticalTransceiverAbility | read-only | current | This object specifies the ability of optical module digitaldiagnotic funtion. Currently, the digitaldiagnotic objects of our optical module inculde 16 paramete… |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.9 | ColumnraisecomOpticalTransceiverDDM | read-only | current | This object specifies if the transceiver supports on digital diagnostic function, support or not support.To the xfp, the default value of this object is suppor… |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.10 | ColumnraisecomOpticalTransceiverCalibrationType | read-only | current | This object specifies the calibration type of the transceiver, internal, external, unknown. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.11 | ColumnraisecomOpticalTransceiverRSSI | read-only | current | This object specifies the calibration type of the transceiver, support or not support. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.12 | ColumnraisecomOpticalTransceiverVendorRev | read-only | current | the version number of the transceiver. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.13 | ColumnraisecomOpticalTransceiverBRMax | read-only | current | the min data rate of the transceiver,mesured in Mbps . this object belongs to xfp and sfp. The object will be shown in unit of Gbps, and the precision is 0.1. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.14 | ColumnraisecomOpticalTransceiverBRMin | read-only | current | the min data rate of the transceiver,mesured in Mbps. this object belongs to xfp and sfp.To the sfp, the min data rate value is equal to the max data rate valu… |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.15 | ColumnraisecomOpticalTransceiverWavelengthContrl | read-only | current | if the transceiver supports on wavelength control support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.16 | ColumnraisecomOpticalTransceiverWavelength | read-only | current | Wavelength of the interface, measured in pm(0.001nm). this object belongs to xfp. The object will be shown in unit of nm, and the precision is 0.01. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.17 | ColumnraisecomOpticalTransceiverWaveTolerance | read-only | current | the range of laser wavelength from nominal wavelength,mesured in pm(0.001*nm). this object belongs to xfp. The object will be shown in unit of nm, and the prec… |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.18 | ColumnraisecomOpticalTransceiverCompatibility | read-only | current | the compatibility type that the transceiver supports,such as 10GBASE-SR. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.19 | ColumnraisecomOpticalTransceiverPowerDissipation | read-only | current | the max power dissipation of the transceiver, p1W5,p2W5,p3W5,exceed3W5. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.20 | ColumnraisecomOpticalTransceiverCDR | read-only | current | the optical module supports on CDR fundtion. support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.21 | ColumnraisecomOpticalTransceiverRefClock | read-only | current | if the transceiver requires outside reference clock required,notrequired. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.22 | ColumnraisecomOpticalTransceiverTransmitterType | read-only | current | The transmitter type of the transceiver,such as 850 nm VCSEL. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.24 | ColumnraisecomOpticalTransceiverCooled | read-only | current | The transmitter cooled type of the transceiver cooled,uncooled. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.25 | ColumnraisecomOpticalTransceiverTunalbe | read-only | current | The transmitter tunable type of the transceiver tunable,untunable. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.26 | ColumnraisecomOpticalTransceiverDetectorType | read-only | current | The detector type of the transceiver pin, apd. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.27 | ColumnraisecomOpticalTransceiverLineLoopBack | read-only | current | The transceiver support status of sideline loop-back control support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.28 | ColumnraisecomOpticalTransceiverXFILoopBack | read-only | current | The transceiver support status of XFI loop-back control support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.29 | ColumnraisecomOpticalTransceiverVps | read-only | current | This object specifies if the optical module supports on VPS support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.30 | ColumnraisecomOpticalTransceiverTxDis | read-only | current | The transceiver support status of software control the transmitter status support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.31 | ColumnraisecomOpticalTransceiverStandby | read-only | current | The transceiver support status of software control the standby mode. support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.32 | ColumnraisecomOpticalTransceiverInVpsLowPower | read-only | current | The VPS in low power support status of the transceiver support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.33 | ColumnraisecomOpticalTransceiverOutVpsLowPower | read-only | current | The VPS out low power support status of the transceiver support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.34 | ColumnraisecomOpticalTransceiverFEC | read-only | current | The FEC support status of transceiver support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.35 | ColumnraisecomOpticalTransceiverCMU | read-only | current | The CMU support status of transceiver support,notsupport. this object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.1.1.1.36 | ColumnraisecomOpticalTransceiverBR | read-only | current | This object specifies the Nominal bitrate of the transceiver�� 125Mbps, 155Mbps, 622Mbps, 1.25Gbps, 2.5Gbps. this object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.2 | NoderaisecomOpticalTransceiverDDMGroup | |||
| 1.3.6.1.4.1.8886.1.18.2.2.1 | TableraisecomOpticalTransceiverDDMTable | not-accessible | current | This table provides objects to monitor optical parameters in a network element. |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1 | RowraisecomOpticalTransceiverDDMEntry | not-accessible | current | An entry in the raisecomOpticalTransceiverMonTable provides objects to monitor an optical parameter at an optical interface. |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.1 | ColumnraisecomOpticalTransceiverParameterType | not-accessible | current | This object specifies the optical parameter that is being monitored in this entry. This object belongs to xfp/sfp. |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.2 | ColumnraisecomOpticalTransceiverParameterValue | read-only | current | This object gives the value measured for the particular optical parameter specified by the raisecomOpticalMonParameterType object. This object belongs to xfp/s… |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.3 | ColumnraisecomOpticalTransceiverParamHighAlarmThresh | read-only | current | This object gives the high alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalPar… |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.4 | ColumnraisecomOpticalTransceiverParamHighWarningThresh | read-only | current | This object is used to set a high warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value giv… |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.5 | ColumnraisecomOpticalTransceiverParamLowAlarmThresh | read-only | current | This object is used to set a low alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpti… |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.6 | ColumnraisecomOpticalTransceiverParamLowWarningThresh | read-only | current | This object is used to set a low warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value give… |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.7 | ColumnraisecomOpticalTransceiverParamAlarmStatus | read-only | current | This object is used to indicate the current status of the thresholds for the monitored optical parameter on the interface. If a threshold is currently being ex… |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.8 | ColumnraisecomOpticalTransceiverParamAlarmLastValue | read-only | current | This object indicates the optical parameter value at the last time a threshold related to a particular optical parameter was exceeded on the interface. If no t… |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.9 | ColumnraisecomOpticalTransceiverParamAlarmLastChange | read-only | current | This object specifies the value of sysUpTime at the last time a threshold related to a particular optical parameter was exceeded on the interface. This object … |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.10 | ColumnraisecomOpticalTransceiverDDM15MinValidIntervals | read-only | current | This object gives the number of previous 15 minute intervals for which valid performance monitoring data has been stored on the interface. The value of this ob… |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.11 | ColumnraisecomOpticalTransceiverDDM24HrValidIntervals | read-only | current | This object gives the number of previous 24 hour intervals for which valid performance monitoring data has been stored on the interface. The max value of this … |
| 1.3.6.1.4.1.8886.1.18.2.2.1.1.12 | ColumnraisecomOpticalTransceiverDDMValidStatus | read-only | current | This object indicates the parameter row is valid or invalid. The object value is 'valide' when the module is present and supporting digitaldiagnotic. The objec… |
| 1.3.6.1.4.1.8886.1.18.2.3 | NoderaisecomOpticalTransceiverPMGroup | |||
| 1.3.6.1.4.1.8886.1.18.2.3.1 | TableraisecomOpticalTransceiverPMCurrentTable | not-accessible | current | This table contains performance monitoring data for the various optical parameters, collected over the current 15 minute or the current 24 hour interval. |
| 1.3.6.1.4.1.8886.1.18.2.3.1.1 | RowraisecomOpticalTransceiverPMCurrentEntry | not-accessible | current | An entry in the raisecomOpticalTransceiverPMCurrentTable. It contains performance monitoring data for a monitored optical parameter at an interface, collected … |
| 1.3.6.1.4.1.8886.1.18.2.3.1.1.1 | ColumnraisecomOpticalTransceiverPMCurrentPeriod | not-accessible | current | This object indicates whether the optical parameter values given in this entry are collected over the current 15 minute or the current 24 hour interval. This o… |
| 1.3.6.1.4.1.8886.1.18.2.3.1.1.2 | ColumnraisecomOpticalTransceiverPMCurrentParamType | not-accessible | current | This object specifies the optical parameter that is being monitored, in this entry. This object belongs to xfp/sfp. |
| 1.3.6.1.4.1.8886.1.18.2.3.1.1.3 | ColumnraisecomOpticalTransceiverPMCurrentMaxParam | read-only | current | This object gives the maximum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval. This object belongs… |
| 1.3.6.1.4.1.8886.1.18.2.3.1.1.4 | ColumnraisecomOpticalTransceiverPMCurrentMinParam | read-only | current | This object gives the minimum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval. This object belongs… |
| 1.3.6.1.4.1.8886.1.18.2.3.1.1.5 | ColumnraisecomOpticalTransceiverPMCurrentMeanParam | read-only | current | This object gives the average value of the monitored optical parameter, in the current 15 minute or the current 24 hour interval. This object belongs to xfp/sf… |
| 1.3.6.1.4.1.8886.1.18.2.3.2 | TableraisecomOpticalTransceiverPMIntervalTable | not-accessible | current | This table stores performance monitoring data for the various optical parameters, collected over previous intervals. This table can have entries for one comple… |
| 1.3.6.1.4.1.8886.1.18.2.3.2.1 | RowraisecomOpticalTransceiverPMIntervalEntry | not-accessible | current | An entry in the raisecomOpticalTransceiverPMIntervalTable. It contains performance monitoring data for an optical parameter, collected over a previous interval. |
| 1.3.6.1.4.1.8886.1.18.2.3.2.1.1 | ColumnraisecomOpticalTransceiverPMIntervalPeriod | not-accessible | current | This object indicates whether the optical parameter values, given in this entry, are collected over a period of 15 minutes or 24 hours. This object belongs to … |
| 1.3.6.1.4.1.8886.1.18.2.3.2.1.2 | ColumnraisecomOpticalTransceiverPMIntervalNumber | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of optical parameter values is available. The interval identified by 1 is the most r… |
| 1.3.6.1.4.1.8886.1.18.2.3.2.1.3 | ColumnraisecomOpticalTransceiverPMIntervalParamType | not-accessible | current | This object specifies the optical parameter that is being monitored, in this entry. This object belongs to xfp/sfp. |
| 1.3.6.1.4.1.8886.1.18.2.3.2.1.4 | ColumnraisecomOpticalTransceiverPMIntervalMaxParam | read-only | current | This object gives the maximum value measured for the optical parameter, in a particular 15 minute or 24 hour interval. This object belongs to xfp/sfp. |
| 1.3.6.1.4.1.8886.1.18.2.3.2.1.5 | ColumnraisecomOpticalTransceiverPMIntervalMinParam | read-only | current | This object gives the minimum value measured for the optical parameter, in a particular 15 minute or 24 hour interval. This object belongs to xfp/sfp. |
| 1.3.6.1.4.1.8886.1.18.2.3.2.1.6 | ColumnraisecomOpticalTransceiverPMIntervalMeanParam | read-only | current | This object gives the average value of the measured optical parameter, in a particular 15 minute or 24 hour interval. This object belongs to xfp/sfp. |
| 1.3.6.1.4.1.8886.1.18.2.4 | NoderaisecomOpticalTransceiverStatusGroup | |||
| 1.3.6.1.4.1.8886.1.18.2.4.1 | TableraisecomOpticalTransceiverCurrentStatusTable | not-accessible | current | This table stores the hard ware information and the information set by user of the transceiver. This object belongs to xfp/sfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1 | RowraisecomOpticalTransceiverCurrentStatusEntry | not-accessible | current | An entry in the raisecomOpticalTransceiverCurrentStatusTable. It contains performance monitoring data for an optical parameter, collected over a previous inter… |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.1 | ColumnraisecomOpticalTransceiverHwInfoAbsStatus | read-only | current | This object specifies if the optical module is absent present,absent. This object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.2 | ColumnraisecomOpticalTransceiverHwInfoNRStatus | read-only | current | This object specifies if the optical module is ready for operation. ready,notready. This object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.3 | ColumnraisecomOpticalTransceiverHwInfoRxLosStatus | read-only | current | This object specifies if the optical module operation losses the receiving signal normal,loss. This object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.4 | ColumnraisecomOpticalTransceiverHwInfoStandby | read-write | current | This object specifies if the optical module works under standby mode. normal,standby. This object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.5 | ColumnraisecomOpticalTransceiverHwInfoLaser | read-write | current | This object specifies if the optical module laser is turned on on,off. This object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.6 | ColumnraisecomOpticalTransceiverWaveLengthError | read-only | current | This object specifies error between the actual wavelength and the wavelength set by the user,measured in pm. This object belongs to xfp. The object will be sho… |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.7 | ColumnraisecomOpticalTransceiverUserWaveLength | read-write | current | This object specifies the wavelength value of the optical module set by user,measured in pm. This object belongs to xfp. The object will be shown in unit of nm… |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.8 | ColumnraisecomOpticalTransceiverUserDataRate | read-write | current | This object specifies the data rate of the optical module set by user,measured in Mbps. This object belongs to xfp. The object will be shown in unit of Gbps, a… |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.9 | ColumnraisecomOpticalTransceiverUserLineLoopBack | read-write | current | This object specifies if the sideline loop-back is tuned on , user can change the loop back mode through the object. normal,lineLoopback. This object belongs t… |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.10 | ColumnraisecomOpticalTransceiverUserXFILoopBack | read-write | current | This object specifies if the XFI loop-back is tuned on user can change the loop back mode through the object. normal,xfiLoopback. This object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.11 | ColumnraisecomOpticalTransceiverPortNotifyEnable | read-write | current | This object specifies the generation of a port notifications, enable or disable. This object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.12 | ColumnraisecomOpticalTransceiverPortDDMEnable | read-write | current | This object specifies the status of digitaldiagnotic on a port, enable or disable. This object belongs to xfp and sfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.13 | ColumnraisecomOpticalTransceiverPortCheckPwdEnable | read-write | current | This object specifies the status of password checking on a port, enable or disable. This object belongs to xfp. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.14 | ColumnraisecomOpticalTransceiverTxFaultCount | read-only | current | This object specifies the number of tx-fault signals. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.15 | ColumnraisecomOpticalTransceiverTxFaultCountClear | read-write | current | This object specifies clear the statistcs of tx-fault signals. |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.16 | ColumnraisecomOpticalTransceiverSpecificationCheckStatus | read-only | current | This object specifies the check status, accord(0)specifies the optical module accord with industrial. not-accord(2) specifies the optical module not accord wit… |
| 1.3.6.1.4.1.8886.1.18.2.4.1.1.17 | ColumnraisecomOpticalTransceiverTxFaultStatus | read-only | current | This object specifies the tx-fault status. |
| 1.3.6.1.4.1.8886.1.18.3 | NoderaisecomOpticalTransceiverNotifications | |||
| 1.3.6.1.4.1.8886.1.18.3.1 | NotificationraisecomOpticalTransceiverAbsentTrap | current | This notification is sent when the optical module is removed from the device. This notification may be suppressed under the following conditions: - depending o… | |
| 1.3.6.1.4.1.8886.1.18.3.2 | NotificationraisecomOpticalTransceiverPresentTrap | current | This notification is sent when the optical module is plugged into the device. This notification may be suppressed under the following conditions: - depending o… | |
| 1.3.6.1.4.1.8886.1.18.3.3 | NotificationraisecomOpticalTransceiverNRAlarmTrap | current | This notification is sent when the transmitted or received data of optical module is invalid. This notification may be suppressed under the following condition… | |
| 1.3.6.1.4.1.8886.1.18.3.4 | NotificationraisecomOpticalTransceiverNRNormalTrap | current | This notification is sent when the transmitted or received data of optical module is valid. This notification may be suppressed under the following conditions:… | |
| 1.3.6.1.4.1.8886.1.18.3.5 | NotificationraisecomOpticalTransceiverRxLosAlarmTrap | current | This notification is sent when the optical module receiving signal is lost. This notification may be suppressed under the following conditions: - depending on … | |
| 1.3.6.1.4.1.8886.1.18.3.6 | NotificationraisecomOpticalTransceiverRxLosNormaTrap | current | This notification is sent when the optical module receiving signal is back to normal. This notification may be suppressed under the following conditions: - dep… | |
| 1.3.6.1.4.1.8886.1.18.3.7 | NotificationraisecomOpticalTransceiverCheckPwdFailureTrap | current | This notification is sent when the optical module password checking is failed. This notification may be suppressed under the following conditions: - depending … | |
| 1.3.6.1.4.1.8886.1.18.3.8 | NotificationraisecomOpticalTransceiverCheckPwdSucceedTrap | current | This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depend… | |
| 1.3.6.1.4.1.8886.1.18.3.9 | NotificationraisecomOpticalTransceiverParamAlarmTrap | current | This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This… | |
| 1.3.6.1.4.1.8886.1.18.3.10 | NotificationraisecomOpticalTransceiverParamAlarmNormalTrap | current | This notification is sent when the optical module parameter value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This… | |
| 1.3.6.1.4.1.8886.1.18.3.11 | NotificationraisecomOpticalTransceiverParamWarningTrap | current | This notification is sent when the optical module parameter value increase to above the high warning threshold or dicrease to under the low warning threshold. … | |
| 1.3.6.1.4.1.8886.1.18.3.12 | NotificationraisecomOpticalTransceiverParamWarningNormalTrap | current | This notification is sent when the optical module parameter value dicrease to under the high warning threshold or increase to above the low warning threshold. … | |
| 1.3.6.1.4.1.8886.1.18.3.13 | NotificationraisecomOpticalTransceiverLaserBackLightAlarmTrap | current | This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depend… | |
| 1.3.6.1.4.1.8886.1.18.3.14 | NotificationraisecomOpticalTransceiverLaserBackLightAlarmNormalTrap | current | This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depend… | |
| 1.3.6.1.4.1.8886.1.18.3.15 | NotificationraisecomOpticalTransceiverLaserLifeAlarmTrap | current | This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depend… | |
| 1.3.6.1.4.1.8886.1.18.3.16 | NotificationraisecomOpticalTransceiverLaserLifeAlarmNormalTrap | current | This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depend… | |
| 1.3.6.1.4.1.8886.1.18.3.17 | NotificationraisecomOpticalTransceiverParamLowAlarmTrap | current | This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This… | |
| 1.3.6.1.4.1.8886.1.18.3.18 | NotificationraisecomOpticalTransceiverParamLowAlarmNormalTrap | current | This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This… | |
| 1.3.6.1.4.1.8886.1.18.3.19 | NotificationraisecomOpticalTransceiverParamLowWarningTrap | current | This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This… | |
| 1.3.6.1.4.1.8886.1.18.3.20 | NotificationraisecomOpticalTransceiverParamLowWarningNormalTrap | current | This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This… | |
| 1.3.6.1.4.1.8886.1.18.4 | NoderaisecomOpticalTransceiverParamNotifications | |||
| 1.3.6.1.4.1.8886.1.18.4.1 | NotificationraisecomOpticalTransceiverTemperatureAlarmTrap | current | This notification is sent when the optical module Temperature value increase to above the high alarm threshold or dicrease to under the low alarm threshold. Th… | |
| 1.3.6.1.4.1.8886.1.18.4.2 | NotificationraisecomOpticalTransceiverTemperatureAlarmNormalTrap | current | This notification is sent when the optical module Temperature value dicrease to under the high alarm threshold or increase to above the low alarm threshold. Th… | |
| 1.3.6.1.4.1.8886.1.18.4.3 | NotificationraisecomOpticalTransceiverTemperatureWarningTrap | current | This notification is sent when the optical module Temperature value increase to above the high warning threshold or dicrease to under the low warning threshold… | |
| 1.3.6.1.4.1.8886.1.18.4.4 | NotificationraisecomOpticalTransceiverTemperatureWarningNormalTrap | current | This notification is sent when the optical module Temperature value dicrease to under the high warning threshold or increase to above the low warning threshold… | |
| 1.3.6.1.4.1.8886.1.18.4.5 | NotificationraisecomOpticalTransceiverTxbiasCurrentAlarmTrap | current | This notification is sent when the optical module Tx bias Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold… | |
| 1.3.6.1.4.1.8886.1.18.4.6 | NotificationraisecomOpticalTransceiverTxbiasCurrentAlarmNormalTrap | current | This notification is sent when the optical module Tx bias Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold… | |
| 1.3.6.1.4.1.8886.1.18.4.7 | NotificationraisecomOpticalTransceiverTxbiasCurrentWarningTrap | current | This notification is sent when the optical module Tx bias Current value increase to above the high warning threshold or dicrease to under the low warning thres… | |
| 1.3.6.1.4.1.8886.1.18.4.8 | NotificationraisecomOpticalTransceiverTxbiasCurrentWarningNormalTrap | current | This notification is sent when the optical module Tx bias Current value dicrease to under the high warning threshold or increase to above the low warning thres… | |
| 1.3.6.1.4.1.8886.1.18.4.9 | NotificationraisecomOpticalTransceiverTxPowerAlarmTrap | current | This notification is sent when the optical module Tx Power value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This … | |
| 1.3.6.1.4.1.8886.1.18.4.10 | NotificationraisecomOpticalTransceiverTxPowerAlarmNormalTrap | current | This notification is sent when the optical module Tx Power value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This … | |
| 1.3.6.1.4.1.8886.1.18.4.11 | NotificationraisecomOpticalTransceiverTxPowerWarningTrap | current | This notification is sent when the optical module Tx Power value increase to above the high warning threshold or dicrease to under the low warning threshold. T… | |
| 1.3.6.1.4.1.8886.1.18.4.12 | NotificationraisecomOpticalTransceiverTxPowerWarningNormalTrap | current | This notification is sent when the optical module Tx Power value dicrease to under the high warning threshold or increase to above the low warning threshold. T… | |
| 1.3.6.1.4.1.8886.1.18.4.13 | NotificationraisecomOpticalTransceiverRxPowerAlarmTrap | current | This notification is sent when the optical module Rx Power value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This … | |
| 1.3.6.1.4.1.8886.1.18.4.14 | NotificationraisecomOpticalTransceiverRxPowerWarningTrap | current | This notification is sent when the optical module Rx Power value increase to above the high warning threshold or dicrease to under the low warning threshold. T… | |
| 1.3.6.1.4.1.8886.1.18.4.15 | NotificationraisecomOpticalTransceiverRxPowerWarningNormalTrap | current | This notification is sent when the optical module Rx Power value dicrease to under the high warning threshold or increase to above the low warning threshold. T… | |
| 1.3.6.1.4.1.8886.1.18.4.16 | NotificationraisecomOpticalTransceiverRxPowerAlarmNormalTrap | current | This notification is sent when the optical module Rx Power value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This … | |
| 1.3.6.1.4.1.8886.1.18.4.17 | NotificationraisecomOpticalTransceiverLaserTemperatureAlarmTrap | current | This notification is sent when the optical module Laser Temperature value increase to above the high alarm threshold or dicrease to under the low alarm thresho… | |
| 1.3.6.1.4.1.8886.1.18.4.18 | NotificationraisecomOpticalTransceiverLaserTemperatureWarningTrap | current | This notification is sent when the optical module Laser Temperature value increase to above the high warning threshold or dicrease to under the low warning thr… | |
| 1.3.6.1.4.1.8886.1.18.4.19 | NotificationraisecomOpticalTransceiverLaserTemperatureWarningNormalTrap | current | This notification is sent when the optical module Laser Temperature value dicrease to under the high warning threshold or increase to above the low warning thr… | |
| 1.3.6.1.4.1.8886.1.18.4.20 | NotificationraisecomOpticalTransceiverLaserTemperatureAlarmNormalTrap | current | This notification is sent when the optical module Laser Temperature value dicrease to under the high alarm threshold or increase to above the low alarm thresho… | |
| 1.3.6.1.4.1.8886.1.18.4.21 | NotificationraisecomOpticalTransceiverP5V0supplyVoltageAlarmTrap | current | This notification is sent when the optical module +5.0V supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.22 | NotificationraisecomOpticalTransceiverP5V0supplyVoltageWarningTrap | current | This notification is sent when the optical module +5.0V supply Voltage value increase to above the high warning threshold or dicrease to under the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.23 | NotificationraisecomOpticalTransceiverP5V0supplyVoltageWarningNormalTrap | current | This notification is sent when the optical module +5.0V supply Voltage value dicrease to under the high warning threshold or increase to above the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.24 | NotificationraisecomOpticalTransceiverP5V0supplyVoltageAlarmNormalTrap | current | This notification is sent when the optical module +5.0V supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.25 | NotificationraisecomOpticalTransceiverP3V3supplyVoltageAlarmTrap | current | This notification is sent when the optical module +3.3V supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.26 | NotificationraisecomOpticalTransceiverP3V3supplyVoltageWarningTrap | current | This notification is sent when the optical module +3.3V supply Voltage value increase to above the high warning threshold or dicrease to under the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.27 | NotificationraisecomOpticalTransceiverP3V3supplyVoltageWarningNormalTrap | current | This notification is sent when the optical module +3.3V supply Voltage value dicrease to under the high warning threshold or increase to above the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.28 | NotificationraisecomOpticalTransceiverP3V3supplyVoltageAlarmNormalTrap | current | This notification is sent when the optical module +3.3V supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.29 | NotificationraisecomOpticalTransceiverP1V8supplyVoltageAlarmTrap | current | This notification is sent when the optical module +1.8v supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.30 | NotificationraisecomOpticalTransceiverP1V8supplyVoltageWarningTrap | current | This notification is sent when the optical module +1.8v supply Voltage value increase to above the high warning threshold or dicrease to under the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.31 | NotificationraisecomOpticalTransceiverP1V8supplyVoltageWarningNormalTrap | current | This notification is sent when the optical module +1.8v supply Voltage value dicrease to under the high warning threshold or increase to above the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.32 | NotificationraisecomOpticalTransceiverP1V8supplyVoltageAlarmNormalTrap | current | This notification is sent when the optical module +1.8v supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.33 | NotificationraisecomOpticalTransceiverN5V2supplyVoltageAlarmTrap | current | This notification is sent when the optical module -5.2v supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.34 | NotificationraisecomOpticalTransceiverN5V2supplyVoltageWarningTrap | current | This notification is sent when the optical module -5.2v supply Voltage value increase to above the high warning threshold or dicrease to under the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.35 | NotificationraisecomOpticalTransceiverN5V2supplyVoltageWarningNormalTrap | current | This notification is sent when the optical module -5.2v supply Voltage value dicrease to under the high warning threshold or increase to above the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.36 | NotificationraisecomOpticalTransceiverN5V2supplyVoltageAlarmNormalTrap | current | This notification is sent when the optical module -5.2v supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.37 | NotificationraisecomOpticalTransceiverApdBiasVoltageAlarmTrap | current | This notification is sent when the optical module APD Bias Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshol… | |
| 1.3.6.1.4.1.8886.1.18.4.38 | NotificationraisecomOpticalTransceiverApdBiasVoltageWarningTrap | current | This notification is sent when the optical module APD Bias Voltage value increase to above the high warning threshold or dicrease to under the low warning thre… | |
| 1.3.6.1.4.1.8886.1.18.4.39 | NotificationraisecomOpticalTransceiverApdBiasVoltageWarningNormalTrap | current | This notification is sent when the optical module APD Bias Voltage value dicrease to under the high warning threshold or increase to above the low warning thre… | |
| 1.3.6.1.4.1.8886.1.18.4.40 | NotificationraisecomOpticalTransceiverApdBiasVoltageAlarmNormalTrap | current | This notification is sent when the optical module APD Bias Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshol… | |
| 1.3.6.1.4.1.8886.1.18.4.41 | NotificationraisecomOpticalTransceiverP5V0supplyCurrentAlarmTrap | current | This notification is sent when the optical module +5.0V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.42 | NotificationraisecomOpticalTransceiverP5V0supplyCurrentWarningTrap | current | This notification is sent when the optical module +5.0V supply Current value increase to above the high warning threshold or dicrease to under the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.43 | NotificationraisecomOpticalTransceiverP5V0supplyCurrentWarningNormalTrap | current | This notification is sent when the optical module +5.0V supply Current value dicrease to under the high warning threshold or increase to above the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.44 | NotificationraisecomOpticalTransceiverP5V0supplyCurrentAlarmNormalTrap | current | This notification is sent when the optical module +5.0V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.45 | NotificationraisecomOpticalTransceiverP3V3supplyCurrentAlarmTrap | current | This notification is sent when the optical module +3.3V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.46 | NotificationraisecomOpticalTransceiverP3V3supplyCurrentWarningTrap | current | This notification is sent when the optical module +3.3V supply Current value increase to above the high warning threshold or dicrease to under the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.47 | NotificationraisecomOpticalTransceiverP3V3supplyCurrentWarningNormalTrap | current | This notification is sent when the optical module +3.3V supply Current value dicrease to under the high warning threshold or increase to above the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.48 | NotificationraisecomOpticalTransceiverP3V3supplyCurrentAlarmNormalTrap | current | This notification is sent when the optical module +3.3V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.49 | NotificationraisecomOpticalTransceiverP1V8supplyCurrentAlarmTrap | current | This notification is sent when the optical module +1.8V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.50 | NotificationraisecomOpticalTransceiverP1V8supplyCurrentWarningTrap | current | This notification is sent when the optical module +1.8V supply Current value increase to above the high warning threshold or dicrease to under the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.51 | NotificationraisecomOpticalTransceiverP1V8supplyCurrentWarningNormalTrap | current | This notification is sent when the optical module +1.8V supply Current value dicrease to under the high warning threshold or increase to above the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.52 | NotificationraisecomOpticalTransceiverP1V8supplyCurrentAlarmNormalTrap | current | This notification is sent when the optical module +1.8V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.53 | NotificationraisecomOpticalTransceiverN5V2supplyCurrentAlarmTrap | current | This notification is sent when the optical module -5.2V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.54 | NotificationraisecomOpticalTransceiverN5V2supplyCurrentWarningTrap | current | This notification is sent when the optical module -5.2V supply Current value increase to above the high warning threshold or dicrease to under the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.55 | NotificationraisecomOpticalTransceiverN5V2supplyCurrentWarningNormalTrap | current | This notification is sent when the optical module -5.2V supply Current value dicrease to under the high warning threshold or increase to above the low warning … | |
| 1.3.6.1.4.1.8886.1.18.4.56 | NotificationraisecomOpticalTransceiverN5V2supplyCurrentAlarmNormalTrap | current | This notification is sent when the optical module -5.2V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm thre… | |
| 1.3.6.1.4.1.8886.1.18.4.57 | NotificationraisecomOpticalTransceiverTecCurrentAlarmTrap | current | This notification is sent when the optical module TecCurrent value increase to above the high alarm threshold or dicrease to under the low alarm threshold. Thi… | |
| 1.3.6.1.4.1.8886.1.18.4.58 | NotificationraisecomOpticalTransceiverTecCurrentWarningTrap | current | This notification is sent when the optical module TecCurrent value increase to above the high warning threshold or dicrease to under the low warning threshold.… | |
| 1.3.6.1.4.1.8886.1.18.4.59 | NotificationraisecomOpticalTransceiverTecCurrentWarningNormalTrap | current | This notification is sent when the optical module TecCurrent value dicrease to under the high warning threshold or increase to above the low warning threshold.… | |
| 1.3.6.1.4.1.8886.1.18.4.60 | NotificationraisecomOpticalTransceiverTecCurrentAlarmNormalTrap | current | This notification is sent when the optical module TecCurrent value dicrease to under the high alarm threshold or increase to above the low alarm threshold. Thi… | |
| 1.3.6.1.4.1.8886.1.18.4.61 | NotificationraisecomOpticalTransceiverLaserWavelengthAlarmTrap | current | This notification is sent when the optical module laserWavelength value increase to above the high alarm threshold or dicrease to under the low alarm threshold… | |
| 1.3.6.1.4.1.8886.1.18.4.62 | NotificationraisecomOpticalTransceiverLaserWavelengthWarningTrap | current | This notification is sent when the optical module laserWavelength value increase to above the high warning threshold or dicrease to under the low warning thres… | |
| 1.3.6.1.4.1.8886.1.18.4.63 | NotificationraisecomOpticalTransceiverLaserWavelengthWarningNormalTrap | current | This notification is sent when the optical module laserWavelength value dicrease to under the high warning threshold or increase to above the low warning thres… | |
| 1.3.6.1.4.1.8886.1.18.4.64 | NotificationraisecomOpticalTransceiverLaserWavelengthAlarmNormalTrap | current | This notification is sent when the optical module laserWavelength value dicrease to under the high alarm threshold or increase to above the low alarm threshold… | |
| 1.3.6.1.4.1.8886.1.18.4.65 | NotificationraisecomOpticalTransceiverTxFaultTrap | current | This notification is sent when the SFP optical module occures Tx-fault signal. This notification may be suppressed under the following conditions: - depending … | |
| 1.3.6.1.4.1.8886.1.18.4.66 | NotificationraisecomOpticalTransceiverTxNormalTrap | current | This notification is sent when the SFP optical module cancels the Tx-fault signal. This notification may be suppressed under the following conditions: - depend… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnableVar | INTEGER { enable(1), disable(2) } | current | enable or disable a function. |
| OpticalParameterType | INTEGER { transceiverTemperature (1), txbiasCurrent (2), txPower (3), rxPower (4), laserTemperature(5), p5V0supplyVoltage(6), p3V3supplyVoltage(7), p1V8supplyVoltage(8), n5V2supplyVoltage(9), apdBiasVoltage(10), p5V0supplyCurrent(11), p3V3supplyCurrent(12), p1V8supplyCurrent(13), n5V2supplyCurrent(14), tecCurrent(15), laserWavelength(16) } | current | This value indicates the optical parameter that is being monitored. Valid values are -OpticalParameterType transceiverTemperature(1) :transceiver temperature txbiasCurrent(2) :TX bias current txPower(3) :TX output power… |
| OpticalParameterValue | Integer32 (-1000000 | -40000..6553600) | current | The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalParameterType… |
| OpticalPMPeriod | INTEGER { fifteenMin(1), twentyFourHour(2) } | current | This value indicates the time period over which performance monitoring data has been collected. |