RAPID-SYSTEM-CONFIG-MIB
15 objects
The MIB module to describe WatchGuard Firebox system configuration.
Imported Objects
| RAPID-MIB | rapidstream |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4355.2 | IdentityrsSystemConfigMIB | The MIB module to describe WatchGuard Firebox system configuration. | ||
| 1.3.6.1.4.1.4355.2.3 | IdentityrsSysTraps | current | This is the base object for system wide traps in this entity. | |
| 1.3.6.1.4.1.4355.2.3.0 | IdentityrsSysTrapsPrefix | current | ||
| 1.3.6.1.4.1.4355.2.3.0.1 | NotificationrsAlarmTrap | current | An alarm was raised by Monitoring Agent of this RapidStream entity. | |
| 1.3.6.1.4.1.4355.2.3.0.2 | NotificationrsSnmpStart | current | This trap is sent when the snmp starts. | |
| 1.3.6.1.4.1.4355.2.3.0.3 | NotificationrsSnmpShutdown | current | This trap is sent when the snmp terminates. | |
| 1.3.6.1.4.1.4355.2.4 | IdentityrsSysTrapObjects | current | This is the base object for objects which are used as part of traps. | |
| 1.3.6.1.4.1.4355.2.4.1 | ScalarrsAlarmId | read-only | current | The id of the alarm that generates a trap. |
| 1.3.6.1.4.1.4355.2.4.2 | ScalarrsAlarmLabel | read-only | current | The name of the alarm that generates a trap. |
| 1.3.6.1.4.1.4355.2.4.3 | ScalarrsAlarmTime | read-only | current | The date and time of the alarm that generates a trap. |
| 1.3.6.1.4.1.4355.2.4.4 | ScalarrsAlarmLevel | read-only | current | The level of an alarm generated. |
| 1.3.6.1.4.1.4355.2.4.5 | ScalarrsAlarmHostname | read-only | current | The host name of the system where alarm occurred |
| 1.3.6.1.4.1.4355.2.4.6 | ScalarrsAlarmMsg | read-only | current | The message describing the nature of this alarm. |
| 1.3.6.1.4.1.4355.2.5 | IdentityrsSysTrapControl | current | This is the base object identifier for all objects which are trap control for the entity. | |
| 1.3.6.1.4.1.4355.2.5.1 | ScalarrsAlarmTrapEnable | read-only | current | Indicates whether rsAlarmTrap trap should be generated. |