RAY-MIB
157 objects
The MIB module defines management objects for RAy product series. Revision 201610040000Z.
Imported Objects
| RFC1155-SMI | enterprises Gauge IpAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33555 | Noderacom | |||
| 1.3.6.1.4.1.33555.1 | Identityray | The MIB module defines management objects for RAy product series. Revision 201610040000Z. | ||
| 1.3.6.1.4.1.33555.1.1 | Nodestation | |||
| 1.3.6.1.4.1.33555.1.1.1 | Nodeproduct | |||
| 1.3.6.1.4.1.33555.1.1.1.1 | ScalarproductName | read-only | current | Product name. |
| 1.3.6.1.4.1.33555.1.1.1.2 | ScalarserialNumber | read-only | current | Product serial number. |
| 1.3.6.1.4.1.33555.1.1.1.3 | ScalarunitType | read-only | current | Station type (L or H) and number of the Ethernet ports (1 or 2). |
| 1.3.6.1.4.1.33555.1.1.2 | Nodeinfo | |||
| 1.3.6.1.4.1.33555.1.1.2.1 | ScalardeviceName | read-only | current | Station name. |
| 1.3.6.1.4.1.33555.1.1.2.2 | ScalarswVer | read-only | current | Firmware version. |
| 1.3.6.1.4.1.33555.1.1.2.3 | ScalarswVerRadio | read-only | current | Radio firmware version. |
| 1.3.6.1.4.1.33555.1.1.3 | Nodestatus | |||
| 1.3.6.1.4.1.33555.1.1.3.1 | ScalarsystemStatus | read-only | current | Unit status. |
| 1.3.6.1.4.1.33555.1.1.3.2 | ScalarlineStatus | read-only | current | Radio link status. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.1.3.3 | ScalarpeerNumber | read-only | current | Peer station serial number. |
| 1.3.6.1.4.1.33555.1.1.3.4 | ScalarrfPowerStatus | read-only | current | RF Power amplifier OK/Failure. |
| 1.3.6.1.4.1.33555.1.1.3.5 | ScalarsearchModeDisabled | read-only | current | Search mode disabled on/off. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.1.3.6 | ScalarethPeer | read-only | current | Peer station user Ethernet link status. Not supported by RAy2. |
| 1.3.6.1.4.1.33555.1.1.3.7 | ScalarsecurePeerMode | read-only | current | Secure peer mode. Not supported by RAy10. |
| 1.3.6.1.4.1.33555.1.1.3.8 | ScalarlineStatusII | read-only | current | Radio link status. Not supported by RAy10. |
| 1.3.6.1.4.1.33555.1.1.3.9 | Scalareth1Link | read-only | current | Ethernet 1 link status. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.3.10 | Scalareth2Link | read-only | current | Ethernet 2 link status. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.4 | Nodechassis | |||
| 1.3.6.1.4.1.33555.1.1.4.1 | ScalartemperatureModem | read-only | current | Modem temperature in hundredths of Celsius (C). |
| 1.3.6.1.4.1.33555.1.1.4.2 | ScalartemperatureRadio | read-only | current | Radio temperature in hundredths of Celsius (C). |
| 1.3.6.1.4.1.33555.1.1.4.3 | ScalarvoltageUnit | read-only | current | Power supply voltage in tenths of Volts (V). |
| 1.3.6.1.4.1.33555.1.1.4.4 | ScalarvoltageSource | read-only | current | Source of supply voltage. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.5 | Nodesystem | |||
| 1.3.6.1.4.1.33555.1.1.5.1 | ScalaruseCpu | read-only | current | System use CPU in %. |
| 1.3.6.1.4.1.33555.1.1.5.2 | ScalaruseMemory | read-only | current | System use memory in %. |
| 1.3.6.1.4.1.33555.1.1.5.3 | ScalaruseLogStorage | read-only | current | Use storage for log in %. |
| 1.3.6.1.4.1.33555.1.1.6 | Nodeaccess | |||
| 1.3.6.1.4.1.33555.1.1.6.1 | Scalarsshd | read-only | current | Management interface: SSH. |
| 1.3.6.1.4.1.33555.1.1.6.2 | Scalartelnetd | read-only | current | Management interface: Telnet. |
| 1.3.6.1.4.1.33555.1.1.6.3 | Scalarhttpd | read-only | current | Management interface: HTTP. |
| 1.3.6.1.4.1.33555.1.1.6.4 | Scalarip | read-only | current | Management interface: IP address. |
| 1.3.6.1.4.1.33555.1.1.6.5 | Scalarmac | read-only | current | Management interface: MAC address. |
| 1.3.6.1.4.1.33555.1.1.6.6 | ScalarmanagementVlan | read-only | current | Management interface: VLAN on/off. |
| 1.3.6.1.4.1.33555.1.1.6.7 | ScalarmanagementVlanId | read-only | current | Management interface: VLAN ID. |
| 1.3.6.1.4.1.33555.1.1.6.8 | ScalarwifiHAP | read-only | current | Management interface: WiFi Host Access Point. |
| 1.3.6.1.4.1.33555.1.1.7 | Nodeauthorization | |||
| 1.3.6.1.4.1.33555.1.1.7.1 | TablekeyTable | not-accessible | current | List of product key entries. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.1.7.1.1 | RowkeyEntry | not-accessible | current | Product key entry. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.1.7.1.1.1 | ColumnkeyName | read-only | current | Product key name. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.1.8 | Nodealarm | |||
| 1.3.6.1.4.1.33555.1.1.8.1 | ScalaralarmTemperature | read-only | current | Temperature alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.2 | ScalaralarmVoltageLow | read-only | current | Low voltage alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.3 | ScalaralarmVoltageHigh | read-only | current | High voltage alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.4 | ScalaralarmRss | read-only | current | RSS alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.5 | ScalaralarmSnr | read-only | current | SNR alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.6 | ScalaralarmBer | read-only | current | BER alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.7 | ScalaralarmPeerDisconnected | read-only | current | Peer disconnect alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.8 | ScalaralarmEth1Down | read-only | current | Ethernet 1 Link Down alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.9 | ScalaralarmEth2Down | read-only | current | Ethernet 2 Link Down alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.10 | ScalaralarmRfPowerFail | read-only | current | RF Power Fail alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.11 | ScalaralarmNetBitrate | read-only | current | Air Speed below Limit alarm state. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.1.8.12 | ScalaralarmWifiOn | read-only | current | WiFi Host Access Oint on. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.2 | Nodeinterface | |||
| 1.3.6.1.4.1.33555.1.2.1 | NodeifRadio | |||
| 1.3.6.1.4.1.33555.1.2.1.1 | ScalarrxChannel | read-only | current | Receiver channel ID. |
| 1.3.6.1.4.1.33555.1.2.1.2 | ScalartxChannel | read-only | current | Transceiver channel ID. |
| 1.3.6.1.4.1.33555.1.2.1.3 | ScalarrxFreq | read-only | current | Receiver frequency in kHz. |
| 1.3.6.1.4.1.33555.1.2.1.4 | ScalartxFreq | read-only | current | Transceiver frequency in kHz. |
| 1.3.6.1.4.1.33555.1.2.1.5 | ScalarrxModulation | read-only | current | Rx modulation text ID. |
| 1.3.6.1.4.1.33555.1.2.1.6 | ScalartxModulation | read-only | current | Tx modulation text ID. |
| 1.3.6.1.4.1.33555.1.2.1.7 | ScalarrxModulationIndex | read-only | current | Rx modulation index. |
| 1.3.6.1.4.1.33555.1.2.1.8 | ScalartxModulationIndex | read-only | current | Tx modulation index. |
| 1.3.6.1.4.1.33555.1.2.1.9 | Scalarbandwidth | read-only | current | Radio channel bandwidth. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.2.1.10 | Scalarcoding | read-only | current | Channel coding level. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.2.1.11 | Scalarmatching | read-only | current | Channel matching. |
| 1.3.6.1.4.1.33555.1.2.1.12 | ScalarrfPowerConfigured | read-only | current | Configured RF Power in dBm. |
| 1.3.6.1.4.1.33555.1.2.1.13 | ScalarnetBitrate | read-only | current | Current net bitrate in kbps. |
| 1.3.6.1.4.1.33555.1.2.1.14 | ScalarmaxNetBitrate | read-only | current | Maximum net bitrate in Mbps. |
| 1.3.6.1.4.1.33555.1.2.1.15 | ScalarbandwidthKHz | read-only | current | Radio channel bandwidth in kHz. Not supported by RAy10. |
| 1.3.6.1.4.1.33555.1.2.1.16 | ScalarchannelArrangement | read-only | current | Channel arrangement. Not supported by RAy10. |
| 1.3.6.1.4.1.33555.1.2.1.17 | ScalarrfPowerCurrent | read-only | current | Current RF Power in dBm. Not supported by RAy10. |
| 1.3.6.1.4.1.33555.1.2.2 | NodeifEth | |||
| 1.3.6.1.4.1.33555.1.2.2.1 | TableifEthTable | not-accessible | current | List of Ethernet interfaces. |
| 1.3.6.1.4.1.33555.1.2.2.1.1 | RowifEthEntry | not-accessible | current | Ethernet interface entry. |
| 1.3.6.1.4.1.33555.1.2.2.1.1.1 | Columnspeed | read-only | current | Ethernet speed. |
| 1.3.6.1.4.1.33555.1.2.2.1.1.2 | Columnduplex | read-only | current | Ethernet duplex. |
| 1.3.6.1.4.1.33555.1.2.2.1.1.3 | Columnmdix | read-only | current | Ethernet MDI-X / MDI. |
| 1.3.6.1.4.1.33555.1.2.2.1.1.4 | Columnautonego | read-only | current | Ethernet autonego. |
| 1.3.6.1.4.1.33555.1.2.2.1.1.5 | Columnpause | read-only | current | Ethernet pause. |
| 1.3.6.1.4.1.33555.1.2.2.1.1.6 | ColumnasymPause | read-only | current | Ethernet asymmetric pause. |
| 1.3.6.1.4.1.33555.1.2.2.2 | Scalarprioritized | read-only | current | Ethernet prioritized VLAN support. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.2.2.3 | ScalarvlanId | read-only | current | Ethernet prioritized VLAN ID. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.2.2.4 | ScalarserviceVlanId | read-only | current | Ethernet service VLAN ID between local and remote station. Not supported by RAy2. |
| 1.3.6.1.4.1.33555.1.3 | Nodestatistic | |||
| 1.3.6.1.4.1.33555.1.3.1 | NodemodemR | |||
| 1.3.6.1.4.1.33555.1.3.1.1 | ScalarrxPauseFrames | read-only | current | Number of received Control frames with a valid PAUSE op-code. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.2 | ScalarrxControlFrames | read-only | current | Number of received Control frames. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.3 | ScalarrxBroadcast | read-only | current | Number of received packets with a broadcast destination address. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.4 | ScalarrxMulticast | read-only | current | Number of received packets with a multicast destination address. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.5 | ScalarrxDones | read-only | current | Number of successfully received packets. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.6 | ScalarrxOutOfRangeErrors | read-only | current | Number of received frames larger than 1518 bytes (the frame Type/Length field is indicating a value larger than 1518 bytes). Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.7 | ScalarrxCrcErrors | read-only | current | Number of received frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.8 | ScalarrxCodeErrors | read-only | current | Number of received packets with one or more erroneous nibbles. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.9 | ScalarrxFalseCarrierErrors | read-only | current | Rx false carrier errors. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.10 | ScalarrxDroppedPkts | read-only | current | Number of dropped packets. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.11 | ScalarrxHCBytes | read-only | current | Number of received bytes. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.12 | ScalartxPauseFrames | read-only | current | Number of transmitted Control frames with a valid PAUSE op-code. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.13 | ScalartxControlFrames | read-only | current | Number of transmitted Control frames. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.14 | ScalartxBroadcast | read-only | current | Number of transmitted packets with a broadcast destination address. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.15 | ScalartxMulticast | read-only | current | Number of transmitted packets with a multicast destination address. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.16 | ScalartxDones | read-only | current | Number of successfully transmitted packets. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.17 | ScalartxLengthCheckErrors | read-only | current | Number of transmitted packets with the frame Length field (not a Type field) value that does not match the actual data byte length. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.18 | ScalartxCrcErrors | read-only | current | Number of transmitted frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.19 | ScalartxCollisions | read-only | current | Tx collisions. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.1.20 | ScalartxHCBytes | read-only | current | Number of transmitted bytes. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.2 | Noderadio | |||
| 1.3.6.1.4.1.33555.1.3.2.1 | Scalarrss | read-only | current | Receiving RSS indicator in decimal dBm (-39 -> -3,9). |
| 1.3.6.1.4.1.33555.1.3.2.2 | Scalarsnr | read-only | current | Receiving SNR indicator in decimal dB (39 -> 3,9). |
| 1.3.6.1.4.1.33555.1.3.2.3 | ScalarfecBlockCounter | read-only | current | Total block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.2.4 | ScalarfecUncorrectBlockCounter | read-only | current | Incorrect block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only. |
| 1.3.6.1.4.1.33555.1.3.2.5 | ScalartimeAllConnect | read-only | current | Overall link uptime. |
| 1.3.6.1.4.1.33555.1.3.2.6 | ScalartimeAllDisconnect | read-only | current | Overall link downtime. |
| 1.3.6.1.4.1.33555.1.3.2.7 | ScalartimeMaxDisconnect | read-only | current | The longest drop (disconnecting). |
| 1.3.6.1.4.1.33555.1.3.2.8 | ScalarnumDisconnect | read-only | current | Number of drops (disconnecting). |
| 1.3.6.1.4.1.33555.1.3.2.9 | Scalarreliability | read-only | current | Reliability in thousandths of %. |
| 1.3.6.1.4.1.33555.1.3.2.10 | ScalarlinkUptime | read-only | current | Current radio link uptime. Not supported by RAy10. |
| 1.3.6.1.4.1.33555.1.3.2.11 | Scalarber | read-only | current | Bit Error Rate (BER) multiplied by 10^9. Not supported by RAy10. |
| 1.3.6.1.4.1.33555.1.3.3 | Nodeethernet | |||
| 1.3.6.1.4.1.33555.1.3.3.1 | ScalarethInThroughput | read-only | current | Input Ethernet 1 data port throughput in kbps. Not supported by RAy10. |
| 1.3.6.1.4.1.33555.1.3.3.2 | ScalarethOutThroughput | read-only | current | Output Ethernet 1 data port throughput in kbps. Not supported by RAy10. |
| 1.3.6.1.4.1.33555.1.3.3.3 | Scalareth2InThroughput | read-only | current | Input Ethernet 2 data port throughput in kbps. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.3.3.4 | Scalareth2OutThroughput | read-only | current | Output Ethernet 2 data port throughput in kbps. Supported by RAy2 only. |
| 1.3.6.1.4.1.33555.1.10 | NoderayTraps | |||
| 1.3.6.1.4.1.33555.1.10.1 | NotificationairDisconnect | current | Air line disconnected. Not supported by RAy2. | |
| 1.3.6.1.4.1.33555.1.10.2 | NotificationairConnect | current | Air line connected after being disconnected. Not supported by RAy2. | |
| 1.3.6.1.4.1.33555.1.10.3 | NotificationairWdog | current | Air watch dog. Supported by RAy10 only. | |
| 1.3.6.1.4.1.33555.1.10.4 | NotificationtempAlarm | current | Temperature exceeded the threshold. Not supported by RAy2. | |
| 1.3.6.1.4.1.33555.1.10.5 | NotificationpowerAlarm | current | Power voltage is out of the thresholds. Not supported by RAy2. | |
| 1.3.6.1.4.1.33555.1.10.6 | NotificationmemoryAlarm | current | Memory use exceeded the threshold. Supported by RAy10 only. | |
| 1.3.6.1.4.1.33555.1.10.7 | NotificationrssAlarm | current | RSS exceeded the threshold. Not supported by RAy2. | |
| 1.3.6.1.4.1.33555.1.10.8 | NotificationsnrAlarm | current | SNR exceeded the threshold. Not supported by RAy2. | |
| 1.3.6.1.4.1.33555.1.10.9 | NotificationberAlarm | current | BER exceeded the threshold. Not supported by RAy2. | |
| 1.3.6.1.4.1.33555.1.10.10 | NotificationrfPowerFail | current | RF Power amplifier failure. Not supported. | |
| 1.3.6.1.4.1.33555.1.10.11 | NotificationpeerEthLinkDown | current | Peer station Ethernet link Up/Down. Not supported by RAy2. | |
| 1.3.6.1.4.1.33555.1.11 | Noderay2Traps | |||
| 1.3.6.1.4.1.33555.1.11.1 | Notificationtr2TemperatureAlarm | current | Temperature exceeded the threshold. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.2 | Notificationtr2VoltageLowAlarm | current | Supply voltage below minimal threshold. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.3 | Notificationtr2VoltageHighAlarm | current | Supply voltage above maximal threshold. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.4 | Notificationtr2RssAlarm | current | RSS exceeded the threshold. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.5 | Notificationtr2SnrAlarm | current | SNR exceeded the threshold. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.6 | Notificationtr2BerAlarm | current | BER exceeded the threshold. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.7 | Notificationtr2AirDisconnect | current | Air line disconnected. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.8 | Notificationtr2AirConnect | current | Air line connected after being disconnected. Supported by RAy2 (up to fw 2.1.7.0) only. | |
| 1.3.6.1.4.1.33555.1.11.9 | Notificationtr2Eth1LinkDown | current | Local station Ethernet 1 link Up/Down. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.10 | Notificationtr2Eth21LinkDown | current | Local station Ethernet 2 link Up/Down. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.11 | Notificationtr2RfPowerFail | current | RF Power amplifier failure. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.12 | Notificationtr2NetBitrate | current | Air speed below threshold. Supported by RAy2 only. | |
| 1.3.6.1.4.1.33555.1.11.13 | Notificationtr2WifiOn | current | WiFi Host Access Point is on. Supported by RAy2 only. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlarmState | INTEGER { na (0), up (1), down (2), ack (3) } | current | Alarm status. |
| ModulationList | INTEGER { na (0), qpsk (1), qam16 (2), qam32 (3), qam64 (4), qam128 (5), qam256 (6) } | current | Radio channel modulations numerical list |
| OptionSetting | INTEGER { na (0), on (1), off (2) } | current | Setting of some options. |
| ServiceState | INTEGER { na (0), up (1), down (2) } | current | System service or device state. |