RBN-BIND-MIB
30 objects
Defines the objects necessary to support binding circuits to interfaces.
Imported Objects
| RBN-SMI | rbnMgmt |
| RBN-TC | RbnCircuitHandle RbnPort RbnSlot |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2352.2.17 | IdentityrbnBindMib | Defines the objects necessary to support binding circuits to interfaces. | ||
| 1.3.6.1.4.1.2352.2.17.1 | NoderbnBindMIBObjects | |||
| 1.3.6.1.4.1.2352.2.17.1.1 | TablerbnBindTable | not-accessible | current | This table contains the objects which identify and configure circuit bindings. With respect to creation and deletion of entries in this table, rows are created… |
| 1.3.6.1.4.1.2352.2.17.1.1.1 | RowrbnBindEntry | not-accessible | current | A conceptual row in the rbnBindTable. |
| 1.3.6.1.4.1.2352.2.17.1.1.1.1 | ColumnrbnBindCircuit | not-accessible | current | A key identifying the circuit for which the binding applies. Note the implication: this key identifies an existing circuit. A basic tenent thus evolves: the ci… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.2 | ColumnrbnBindType | read-create | current | The type of the binding. See the definition of the RbnBindType TEXTUAL-CONVENTION for the possible types. The bind type must be appropriate to the type of circ… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.3 | ColumnrbnBindName | read-create | current | A name associated with the binding. This field is only applicable when the value of rbnBindType is: bypassBind interfaceBind subscriberBind l2tptunnelBind mult… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.4 | ColumnrbnBindPassword | read-create | current | The AAA password. This field is only applicable when the value of rbnBindType is: subscriberBind If the value of rbnBindType is not this bind type, then rbnBin… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.5 | ColumnrbnBindContext | read-create | current | The name of the context associated with the binding. This field is applicable only when one of the following rbnBindType values is specified: Bind Type Value o… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.6 | ColumnrbnBindAuthContext | read-create | current | The name of the authentication context associated with the binding. It is the name of the context to which PPP sessions on the circuits being bound are restric… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.7 | ColumnrbnBindServiceGrp | read-create | current | The name of the service access list associated with the binding. It is the name of the service access list that defines the services available to the PPP-encap… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.8 | ColumnrbnBindAcl | read-create | current | The name of the bridge access control list associated with the binding. It is the name of the Access control list to be applied to the session. The access cont… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.9 | ColumnrbnBindAuthChap | read-create | current | If 'true', specifies that the PPP authentication protocol to be used is Challenge Handshake Authentication Protocol. This object is applicable only when one of… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.10 | ColumnrbnBindAuthPap | read-create | current | If 'true', specifies that the PPP authentication protocol to be used is Password Authentication Protocol. This object is applicable only when one of the follow… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.11 | ColumnrbnBindAuthWait | read-create | current | If 'true', specifies that the inbound CHAP authentication is completed first. In other words, after the two sides have decided to use CHAP, the SMS waits for t… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.12 | ColumnrbnBindAuthPapFirst | read-create | current | If 'true', specifies that Password Authentication Protocol (PAP) shall be negotiated before Challenge Handshake Authentication Protocol (CHAP). IF 'false', the… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.13 | ColumnrbnBindMaxSessions | read-create | current | The maximum number of concurrent sessions allowed on the circuit. Applicable only to circuits which have an encapsulation of type PPPoE. If the circuit is not … |
| 1.3.6.1.4.1.2352.2.17.1.1.1.14 | ColumnrbnBindPvcSlot | read-create | current | The chassis slot number associated with this binding. Use of the 'dot1qBind' type is for binding an ATM or Frame Relay PVC to an Ethernet port using the specif… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.15 | ColumnrbnBindPvcPort | read-create | current | The chassis port number associated with this binding. Use of the 'dot1qBind' type is for binding an ATM or Frame Relay PVC to an Ethernet port using the specif… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.16 | ColumnrbnBindVpn | read-create | current | The specific tag to which the PVC is mapped on the specified Ethernet port. Use of the 'dot1qBind' type is for binding an ATM or Frame Relay PVC to an Ethernet… |
| 1.3.6.1.4.1.2352.2.17.1.1.1.17 | ColumnrbnBindAuthDhcp | read-create | current | If 'true', specifies an authentication mechanism where the DHCP server makes a request to the authentication subsystem upon receipt of incoming DHCP discover p… |
| 1.3.6.1.4.1.2352.2.17.2 | NoderbnBindMIBConformance | |||
| 1.3.6.1.4.1.2352.2.17.2.1 | NoderbnBindCompliances | |||
| 1.3.6.1.4.1.2352.2.17.2.1.1 | CompliancerbnBindCompliance | deprecated | The compliance statement for SNMP entities which implement the RBN-BIND-MIB. | |
| 1.3.6.1.4.1.2352.2.17.2.1.2 | CompliancerbnBindCompliance2 | current | The compliance statement for SNMP entities which implement the RBN-BIND-MIB. | |
| 1.3.6.1.4.1.2352.2.17.2.2 | NoderbnBindGroups | |||
| 1.3.6.1.4.1.2352.2.17.2.2.1 | GrouprbnBindConfigGroup | deprecated | The collection of all objects applicable for all values of rbnBindType. | |
| 1.3.6.1.4.1.2352.2.17.2.2.2 | GrouprbnBindConfigGroup2 | current | The collection of all objects applicable for all values of rbnBindType. | |
| 1.3.6.1.4.1.2352.2.17.3 | NoderbnBindMIBNotifications |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RbnBindType | INTEGER { unbound(1), authBind(2), bypassBind(3), interfaceBind(4), subscriberBind(5), l2tptunnelBind(6), sessionBind(7), dot1qBind(8), multiIntfBind(9), multiSubBind(10), multiClipsBind(11) } | current | The binding type. The comment after the enumeration label is the equivalent CLI command that would config the corresponding bind type. |