RBN-RADIUS-MIB
48 objects
This Redback MIB supplements the standard Remote Access Dialin User Service (RADIUS) MIBs, namely: RADIUS-AUTH-CLIENT-MIB (RFC 2618) RADIUS-ACC-CLIENT-MIB (RFC 2620) This module defines additional objects and notifications for managing the RADIUS authentication and accounting servers in use by the Redback system. All mib objects defined in this module are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
Imported Objects
| RADIUS-ACC-CLIENT-MIB | radiusAccClientServerPortNumber radiusAccServerAddress radiusAccServerEntry |
| RADIUS-AUTH-CLIENT-MIB | radiusAuthClientServerPortNumber radiusAuthServerAddress radiusAuthServerEntry |
| RBN-SMI | rbnMgmt |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2352.2.32 | IdentityrbnRadiusMib | This Redback MIB supplements the standard Remote Access Dialin User Service (RADIUS) MIBs, namely: RADIUS-AUTH-CLIENT-MIB (RFC 2618) RADIUS-ACC-CLIENT-MIB (RFC… | ||
| 1.3.6.1.4.1.2352.2.32.0 | NoderbnRadiusMIBNotifications | |||
| 1.3.6.1.4.1.2352.2.32.0.1 | NotificationrbnRadiusAuthStateChange | current | This notification signifies that a RADIUS authorization server has transitioned to 'up' or 'down'. Note: if rbnRadiusAuthSrvState's value is 'down' and rbnRadi… | |
| 1.3.6.1.4.1.2352.2.32.0.2 | NotificationrbnRadiusAcctStateChange | current | This notification signifies that a RADIUS accounting server has transitioned to 'up' or 'down'. Note: if rbnRadiusAcctSrvState's value is 'down' and rbnRadiusR… | |
| 1.3.6.1.4.1.2352.2.32.1 | NoderbnRadiusMIBObjects | |||
| 1.3.6.1.4.1.2352.2.32.1.1 | NoderbnRadiusAuthObjects | |||
| 1.3.6.1.4.1.2352.2.32.1.1.1 | ScalarrbnRadiusAuthPktTimeout | read-write | current | The maximum amount of time to wait for a response from a RADIUS authorization server before assuming the packet was lost. |
| 1.3.6.1.4.1.2352.2.32.1.1.2 | ScalarrbnRadiusAuthSrvTimeout | read-write | current | The maximum amount of time to wait for any response from a RADIUS authorization server before assuming the server is unreachable. A value of '0' indicates that… |
| 1.3.6.1.4.1.2352.2.32.1.1.3 | ScalarrbnRadiusAuthDeadtime | read-write | current | After a RADIUS authorization server has been transitioned to 'down' it will be assumed to be unreachable for this interval. After that point the system may sta… |
| 1.3.6.1.4.1.2352.2.32.1.1.4 | ScalarrbnRadiusAuthTries | read-write | current | The number of times the system will attempt to transmit an authorization request to a RADIUS server. If multiple RADIUS authorization servers have been configu… |
| 1.3.6.1.4.1.2352.2.32.1.1.5 | TablerbnRadiusAuthSrvTable | not-accessible | current | This table augments the radiusAuthServerTable. All entries that exist in that table will have a corresponding entry in this table. |
| 1.3.6.1.4.1.2352.2.32.1.1.5.1 | RowrbnRadiusAuthSrvEntry | not-accessible | current | A Redback proprietary extension to the radiusAuthServerEntry. |
| 1.3.6.1.4.1.2352.2.32.1.1.5.1.1 | ColumnrbnRadiusAuthSrvState | read-only | current | The current state of the RADIUS server. |
| 1.3.6.1.4.1.2352.2.32.1.1.5.1.2 | ColumnrbnRadiusAuthSrvLastChange | read-only | current | The value of sysUpTime when this server last changed state. If rbnRadiusAuthSrvState is 'unknown' this is effectively the value of sysUpTime when this server w… |
| 1.3.6.1.4.1.2352.2.32.1.1.5.1.3 | ColumnrbnRadiusAuthSrvCounterResetTime | read-only | current | The value of sysUpTime on the most recent occasion when any of the counters for this RADIUS server experienced a discontinuity. Note: this includes counters in… |
| 1.3.6.1.4.1.2352.2.32.1.1.5.1.4 | ColumnrbnRadiusAuthSrvSendErrors | read-only | current | The number of packets destined to this RADIUS server which could not be transmitted due to an error. Discontinuities in the value of this counter are indicated… |
| 1.3.6.1.4.1.2352.2.32.1.1.6 | ScalarrbnRadiusAuthStripDomain | read-write | current | If this object is false, the entire username, including the domain name is sent to the RADIUS server. If true, the domain portion of a structured username is s… |
| 1.3.6.1.4.1.2352.2.32.1.2 | NoderbnRadiusAcctObjects | |||
| 1.3.6.1.4.1.2352.2.32.1.2.1 | ScalarrbnRadiusAcctPktTimeout | read-write | current | The maximum amount of time to wait for a response from a RADIUS accounting server before assuming the packet was lost. Note: if the system is using a RADIUS se… |
| 1.3.6.1.4.1.2352.2.32.1.2.2 | ScalarrbnRadiusAcctSrvTimeout | read-write | current | The maximum amount of time to wait for any response from a RADIUS accounting server before assuming the server is unreachable. A value of '0' indicates that th… |
| 1.3.6.1.4.1.2352.2.32.1.2.3 | ScalarrbnRadiusAcctDeadtime | read-write | current | After a RADIUS accounting server has been transitioned to 'down' it will be assumed to be unreachable for this interval. After that point the system may start … |
| 1.3.6.1.4.1.2352.2.32.1.2.4 | ScalarrbnRadiusAcctTries | read-write | current | The number of times the system will attempt to transmit an accounting record to a RADIUS server. If multiple RADIUS accounting servers have been configured ret… |
| 1.3.6.1.4.1.2352.2.32.1.2.5 | TablerbnRadiusAcctSrvTable | not-accessible | current | This table augments the radiusAccServerTable. All entries that exist in that table will have a corresponding entry in this table. |
| 1.3.6.1.4.1.2352.2.32.1.2.5.1 | RowrbnRadiusAcctSrvEntry | not-accessible | current | A Redback proprietary extension to the radiusAccServerEntry. |
| 1.3.6.1.4.1.2352.2.32.1.2.5.1.1 | ColumnrbnRadiusAcctSrvState | read-only | current | The current state of the RADIUS server. |
| 1.3.6.1.4.1.2352.2.32.1.2.5.1.2 | ColumnrbnRadiusAcctSrvLastChange | read-only | current | The value of sysUpTime when this server last changed state. If rbnRadiusAcctSrvState is 'unknown' this is effectively the value of sysUpTime when this server w… |
| 1.3.6.1.4.1.2352.2.32.1.2.5.1.3 | ColumnrbnRadiusAcctSrvCounterResetTime | read-only | current | The value of sysUpTime on the most recent occasion when any of the counters for this RADIUS server experienced a discontinuity. Note: this includes counters in… |
| 1.3.6.1.4.1.2352.2.32.1.2.5.1.4 | ColumnrbnRadiusAcctSrvSendErrors | read-only | current | The number of packets destined to this RADIUS server which could not be transmitted due to an error. Discontinuities in the value of this counter are indicated… |
| 1.3.6.1.4.1.2352.2.32.1.2.6 | ScalarrbnRadiusAcctStripDomain | read-write | current | If this object is false, the entire username, including the domain name is sent to the RADIUS server. If true, the domain portion of a structured username is s… |
| 1.3.6.1.4.1.2352.2.32.1.3 | NoderbnRadiusNotifyObjects | |||
| 1.3.6.1.4.1.2352.2.32.1.3.1 | ScalarrbnRadiusClientPort | accessible-for-notify | current | A system may be configured to use a range of source TCP/IP ports when sending requests to a RADIUS server. When a server transitions to 'up' or 'down' and a st… |
| 1.3.6.1.4.1.2352.2.32.1.3.2 | ScalarrbnRadiusContext | accessible-for-notify | current | The name of the context in which this server is configured. |
| 1.3.6.1.4.1.2352.2.32.1.3.3 | ScalarrbnRadiusReason | accessible-for-notify | current | The reason for the server's last state change. |
| 1.3.6.1.4.1.2352.2.32.1.3.4 | ScalarrbnRadiusUsername | accessible-for-notify | current | The name of the user the system was trying to authenticate or send accouting information for when the RADIUS server transitioned to 'down'. Note: the 'username… |
| 1.3.6.1.4.1.2352.2.32.2 | NoderbnRadiusMIBConformance | |||
| 1.3.6.1.4.1.2352.2.32.2.1 | NoderbnRadiusCompliances | |||
| 1.3.6.1.4.1.2352.2.32.2.1.1 | CompliancerbnRadiusCompliance | deprecated | The compliance statement for SNMP entities which implement the Redback RADIUS MIB. | |
| 1.3.6.1.4.1.2352.2.32.2.1.2 | CompliancerbnRadiusCompliance2 | current | The compliance statement for SNMP entities which implement the Redback RADIUS MIB. | |
| 1.3.6.1.4.1.2352.2.32.2.2 | NoderbnRadiusGroups | |||
| 1.3.6.1.4.1.2352.2.32.2.2.1 | GrouprbnRadiusAuthGroup | deprecated | The collection of objects used to manage RADIUS authentication servers. | |
| 1.3.6.1.4.1.2352.2.32.2.2.2 | GrouprbnRadiusAcctGroup | deprecated | The collection of objects used to manage RADIUS accounting servers. | |
| 1.3.6.1.4.1.2352.2.32.2.2.3 | GrouprbnRadiusNotifyGroup | current | The collection of objects used only in notifications. | |
| 1.3.6.1.4.1.2352.2.32.2.2.4 | GrouprbnRadiusAuthNotifyGroup | current | Notification for tracking the status of RADIUS authentication servers. | |
| 1.3.6.1.4.1.2352.2.32.2.2.5 | GrouprbnRadiusAcctNotifyGroup | current | Notification for tracking the status of RADIUS accounting servers. | |
| 1.3.6.1.4.1.2352.2.32.2.2.6 | GrouprbnRadiusAuthGroup2 | current | The collection of objects used to manage RADIUS authentication servers. | |
| 1.3.6.1.4.1.2352.2.32.2.2.7 | GrouprbnRadiusAcctGroup2 | current | The collection of objects used to manage RADIUS accounting servers. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RbnRadiusServerReason | INTEGER { responding(1), packetTimeout(2), serverTimeout(3), portDown(4) } | current | When a RADIUS transitions to a new state, this identifies the reason for the transition. Note that there are two types of timeouts: packet-level and server-level. The packet-level timeout is managed via rbnRadiusAuthPkt… |
| RbnRadiusServerState | INTEGER { unknown(1), up(2), down(3) } | current | The current state of a RADIUS server. When a server is initially configured its state is 'unknown'. When requests are sent to this server it will transition to either 'up' or 'down', depending on whether the server repl… |