RBTWS-CLIENT-SESSION-MIB
57 objects
Client Session MIB. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2006 Enterasys Networks, Inc. All rights reserved. This SNMP Management Information Base Specification (Specification) embodies confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Enterasys Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| RBTWS-AP-TC | RbtwsAccessType RbtwsApSerialNum RbtwsRadioNum RbtwsRadioRate RbtwsRssi |
| RBTWS-CLIENT-SESSION-TC | RbtwsClientAuthenProtocolType RbtwsClientSessionState RbtwsUserAccessType |
| RBTWS-ROOT-MIB | rbtwsMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.15.1.4.4 | IdentityrbtwsClientSessionMib | Client Session MIB. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2006 Entera… | ||
| 1.3.6.1.4.1.52.4.15.1.4.4.1 | NoderbtwsClientSessionObjects | |||
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1 | NoderbtwsClientSessionDataObjects | |||
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1 | TablerbtwsClSessClientSessionTable | not-accessible | current | Client Session Table. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1 | RowrbtwsClSessClientSessionEntry | not-accessible | current | Information about a particular client session. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.1 | ColumnrbtwsClSessClientSessMacAddress | not-accessible | current | Client MAC address. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.2 | ColumnrbtwsClSessClientSessSessionId | read-only | current | Session ID is a string long enough to be sure we can make it unique over a long time. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.3 | ColumnrbtwsClSessClientSessUsername | read-only | current | Client user name. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.4 | ColumnrbtwsClSessClientSessIpAddress | read-only | current | Client IP address. If the client has no IP address, the value will be 0.0.0.0. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.5 | ColumnrbtwsClSessClientSessEncryptionType | read-only | current | Encryption type. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.6 | ColumnrbtwsClSessClientSessVlan | read-only | current | The name of the client VLAN. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.7 | ColumnrbtwsClSessClientSessApSerialNum | read-only | current | Serial Number of the AP this client is connected to. It is a zero length string when wired access is used. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.8 | ColumnrbtwsClSessClientSessRadioNum | read-only | current | Number of the Radio that provides service to this client. It is 'not-applicable' when wired access is used. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.9 | ColumnrbtwsClSessClientSessAccessType | read-only | current | Access type this client uses (via AP, DAP or wired). |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.10 | ColumnrbtwsClSessClientSessAuthMethod | read-only | deprecated | Authentication Method. Deprecated, use rbtwsClSessClientSessDot1xAuthMethod instead. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.11 | ColumnrbtwsClSessClientSessAuthServer | read-only | current | Authentication Server's IP Address. If the client is authenticated via the local DB, or not authenticated, its value will be the system IP. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.12 | ColumnrbtwsClSessClientSessPortOrNum | read-only | current | Port number. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.13 | ColumnrbtwsClSessClientSessVlanTag | read-only | current | VLAN tag. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.14 | ColumnrbtwsClSessClientSessTimeStamp | read-only | current | Session start time stamp. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.15 | ColumnrbtwsClSessClientSessSsid | read-only | current | SSID. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.16 | ColumnrbtwsClSessClientSessState | read-only | deprecated | Session state. Deprecated, use rbtwsClSessClientSessSessionState instead. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.17 | ColumnrbtwsClSessClientSessLoginType | read-only | current | Login type (mac, web, dot1x or last-resort). |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.18 | ColumnrbtwsClSessClientSessDot1xAuthMethod | read-only | current | Dot1x Authentication Method. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.1.1.19 | ColumnrbtwsClSessClientSessSessionState | read-only | current | Session non-intermediate state. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2 | TablerbtwsClSessRoamingHistoryTable | not-accessible | current | Roaming History Table. Expansion of Client Session Table. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1 | RowrbtwsClSessRoamingHistoryEntry | not-accessible | current | Roaming History Entry. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1.1 | ColumnrbtwsClSessRoamHistMacAddress | not-accessible | current | Client MAC address. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1.2 | ColumnrbtwsClSessRoamHistIndex | not-accessible | current | Entry index. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1.3 | ColumnrbtwsClSessRoamHistApSerialNum | read-only | current | Serial Number of the AP this client was connected to. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1.4 | ColumnrbtwsClSessRoamHistRadioNum | read-only | current | Number of the Radio that provided service to this client. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1.5 | ColumnrbtwsClSessRoamHistAccessType | read-only | current | Access type used by this client (via AP, DAP or wired). |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1.6 | ColumnrbtwsClSessRoamHistApNumOrPort | read-only | current | AP port number, DAP number, or Port number for wired access. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1.7 | ColumnrbtwsClSessRoamHistIpAddress | read-only | current | IP address of the AC (wireless switch) the client or AP was connected to. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.2.1.8 | ColumnrbtwsClSessRoamHistTimeStamp | read-only | current | The difference between the time the session was created on the roamed-to switch and the time the last switch, the one where the user is at currently, started. … |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3 | TablerbtwsClSessClientSessionStatisticsTable | not-accessible | current | Client Session Statistics Table. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1 | RowrbtwsClSessClientSessionStatisticsEntry | not-accessible | current | Client Session Statistics Table Entry. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.1 | ColumnrbtwsClSessClientSessStatsMacAddress | not-accessible | current | Client MAC address. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.2 | ColumnrbtwsClSessClientSessStatsUniPktIn | read-only | current | Unicast packets in. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.3 | ColumnrbtwsClSessClientSessStatsUniOctetIn | read-only | current | Unicast octets in. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.4 | ColumnrbtwsClSessClientSessStatsUniPktOut | read-only | current | Unicast packets out. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.5 | ColumnrbtwsClSessClientSessStatsUniOctetOut | read-only | current | Unicast octets out. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.6 | ColumnrbtwsClSessClientSessStatsMultiPktIn | read-only | current | Multicast packets in. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.7 | ColumnrbtwsClSessClientSessStatsMultiOctetIn | read-only | current | Multicast octets in. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.8 | ColumnrbtwsClSessClientSessStatsEncErrPkt | read-only | current | Number of packets with encryption errors. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.9 | ColumnrbtwsClSessClientSessStatsEncErrOctet | read-only | current | Number of octets with encryption errors. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.10 | ColumnrbtwsClSessClientSessStatsLastRate | read-only | current | Last packet data rate. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.11 | ColumnrbtwsClSessClientSessStatsLastRssi | read-only | current | RSSI (Received Signal Strength Indicator) for last packet, in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.3.1.12 | ColumnrbtwsClSessClientSessStatsLastSNR | read-only | current | Last packet data Signal to Noise Ratio. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.1.4 | ScalarrbtwsClSessTotalSessions | read-only | current | Total number of sessions. |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.2 | NoderbtwsClientSessionConformance | |||
| 1.3.6.1.4.1.52.4.15.1.4.4.1.2.1 | NoderbtwsClientSessionCompliances | |||
| 1.3.6.1.4.1.52.4.15.1.4.4.1.2.1.1 | CompliancerbtwsClientSessionCompliance | current | The compliance statement for devices that implement the Client Session MIB. | |
| 1.3.6.1.4.1.52.4.15.1.4.4.1.2.2 | NoderbtwsClientSessionGroups | |||
| 1.3.6.1.4.1.52.4.15.1.4.4.1.2.2.1 | GrouprbtwsClientSessionCommonGroup | current | Mandatory group of objects implemented to provide Client Session info. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RbtwsAuthMethod | INTEGER { none (1), identity (2), notification (3), nak (4), md5 (5), otp (6), tokenCard (7), tls (14), leap (18), ttls (22), peap (26), msChapv2 (27), eapExt (34), passThru (255) } | deprecated | Authentication methods. |
| RbtwsEncryptionType | INTEGER { none (1), aesCcm (2), aesOcb (3), tkip (4), wep104 (5), wep40 (6), staticWep (7) } | current | Encryption types. |
| RbtwsSessState | INTEGER { invalid (1), initializing (2), assocReqAndAuth (3), assocAndAuth (4), wired (5), webLoginPh1 (6), webLoginPh1B (7), webLoginPh1F (8), webLoginPh2 (9), webPortalLogin (10), authorizing (11), authorized (12), active (13), activePortal (14), deassociated (15), roamingAway (16), updatedToRoam (17), roamedAway (18), killing (19), free (20), enforceSoda (21) } | deprecated | Session states. |