REDLINE-AN50-PMP-V1-MIB
55 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | enterprises IpAddress OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10728 | Noderedline | |||
| 1.3.6.1.4.1.10728.1 | NoderedlineProducts | |||
| 1.3.6.1.4.1.10728.1.1 | NoderedlineAN50 | |||
| 1.3.6.1.4.1.10728.2 | NoderedlineMgmt | |||
| 1.3.6.1.4.1.10728.2.51 | NoderedlineAN50PMPV1 | |||
| 1.3.6.1.4.1.10728.2.51.1 | Tablean50pmpLinkTable | not-accessible | mandatory | Table with Wireless links and connections information configured into AN50 PMP device based on V1 processor. |
| 1.3.6.1.4.1.10728.2.51.1.1 | Rowan50pmpLinkEntry | not-accessible | mandatory | A unique set of link parameters. |
| 1.3.6.1.4.1.10728.2.51.1.1.1 | Columnan50pmpLinkID | read-only | mandatory | Link ID, a unique number between 1 and 1024 that identifies a particular link. |
| 1.3.6.1.4.1.10728.2.51.1.1.2 | Columnan50pmpLinkName | read-write | mandatory | The name of the Link/Connection |
| 1.3.6.1.4.1.10728.2.51.1.1.3 | Columnan50pmpLinkGroupID | read-write | mandatory | Group assigned to this link. |
| 1.3.6.1.4.1.10728.2.51.1.1.4 | Columnan50pmpLinkPeerMac | read-write | mandatory | Link Destination MAC address. |
| 1.3.6.1.4.1.10728.2.51.1.1.5 | Columnan50pmpLinkMaxDLBurstRate | read-write | mandatory | Maximum downlink rate for this link. Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4, 24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8. |
| 1.3.6.1.4.1.10728.2.51.1.1.6 | Columnan50pmpLinkMaxULBurstRate | read-write | mandatory | Maximum uplink rate for this link. Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4, 24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8. |
| 1.3.6.1.4.1.10728.2.51.1.1.7 | Columnan50pmpLinkMaxHost | read-write | mandatory | Maximum number of hosts for this link. |
| 1.3.6.1.4.1.10728.2.51.1.1.8 | Columnan50pmpLinkCIDDLCIR | read-write | mandatory | The downlink commited rate for this connection in kb/s. |
| 1.3.6.1.4.1.10728.2.51.1.1.9 | Columnan50pmpLinkCIDDLPIR | read-write | mandatory | The downlink peak rate for this connection in kb/s. |
| 1.3.6.1.4.1.10728.2.51.1.1.10 | Columnan50pmpLinkCIDULCIR | read-write | mandatory | The uplink commited rate for this connection in kb/s. |
| 1.3.6.1.4.1.10728.2.51.1.1.11 | Columnan50pmpLinkCIDULPIR | read-write | mandatory | The uplink peak rate for this connection in kb/s. |
| 1.3.6.1.4.1.10728.2.51.1.1.12 | Columnan50pmpLinkDLQoS | read-write | mandatory | The downlink QoS level. |
| 1.3.6.1.4.1.10728.2.51.1.1.13 | Columnan50pmpLinkULQoS | read-write | mandatory | The uplink QoS level. |
| 1.3.6.1.4.1.10728.2.51.1.1.14 | Columnan50pmpLinkRowStatus | read-write | mandatory | Status of the row |
| 1.3.6.1.4.1.10728.2.51.2 | Tablean50pmpLinkStatusTable | not-accessible | mandatory | Statistics per uplink connections. |
| 1.3.6.1.4.1.10728.2.51.2.1 | Rowan50pmpLinkStatusEntry | not-accessible | mandatory | Statistics for a link connection. |
| 1.3.6.1.4.1.10728.2.51.2.1.1 | Columnan50pmpLinkStatusID | read-only | mandatory | Index for an50pmpLinkStatusTable table |
| 1.3.6.1.4.1.10728.2.51.2.1.2 | Columnan50pmpLinkStatus | read-only | mandatory | Status of the Link. |
| 1.3.6.1.4.1.10728.2.51.2.1.3 | Columnan50pmpLinkStatusCode | read-only | mandatory | Alarm bits shown as a hex number. |
| 1.3.6.1.4.1.10728.2.51.2.1.4 | Columnan50pmpLinkRegConn | read-only | mandatory | Number of connections configured for this link. |
| 1.3.6.1.4.1.10728.2.51.2.1.5 | Columnan50pmpLinkDLBurstRate | read-only | mandatory | Current master Tx burst rate. Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4, 24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8. |
| 1.3.6.1.4.1.10728.2.51.2.1.6 | Columnan50pmpLinkDLRSSI | read-only | mandatory | RSSI (Received Signal Strength Indicator) at slave. |
| 1.3.6.1.4.1.10728.2.51.2.1.7 | Columnan50pmpLinkDLSINADR | read-only | mandatory | SINADR (Signal Interference and Noise Distorsion Ratio) at slave. |
| 1.3.6.1.4.1.10728.2.51.2.1.8 | Columnan50pmpLinkDLStatLostFrm | read-only | mandatory | SINADR at slave. |
| 1.3.6.1.4.1.10728.2.51.2.1.9 | Columnan50pmpLinkDLStatBlksTot | read-only | mandatory | Blocks transmitted from master to slave. |
| 1.3.6.1.4.1.10728.2.51.2.1.10 | Columnan50pmpLinkDLStatBlksRetr | read-only | mandatory | Block re-transmitted from master to slave. |
| 1.3.6.1.4.1.10728.2.51.2.1.11 | Columnan50pmpLinkDLStatBlksDisc | read-only | mandatory | Blocks lost from master to slave |
| 1.3.6.1.4.1.10728.2.51.2.1.12 | Columnan50pmpLinkDLCIDStatPktDisc | read-only | mandatory | Packets discarded by master due to buffer full. |
| 1.3.6.1.4.1.10728.2.51.2.1.13 | Columnan50pmpLinkDLCIDStatPktTran | read-only | mandatory | Packets transmitted from master to slave. |
| 1.3.6.1.4.1.10728.2.51.2.1.14 | Columnan50pmpLinkDLCIDStatPktRecv | read-only | mandatory | Packets received by slave |
| 1.3.6.1.4.1.10728.2.51.2.1.15 | Columnan50pmpLinkULBurstRate | read-only | mandatory | Current Slave Tx Burst Rate. Rate range: 6Mb/s=1, 9Mb/s=2, 12Mb/s=3, 18Mb/s=4, 24Mb/s=5, 36Mb/s=6, 48Mb/s=7, 54Mbs=8. |
| 1.3.6.1.4.1.10728.2.51.2.1.16 | Columnan50pmpLinkULRSSI | read-only | mandatory | RSSI at master. |
| 1.3.6.1.4.1.10728.2.51.2.1.17 | Columnan50pmpLinkULSINADR | read-only | mandatory | SINADR at master. |
| 1.3.6.1.4.1.10728.2.51.2.1.18 | Columnan50pmpLinkULStatLostFrm | read-only | mandatory | Frames lost from slave to master |
| 1.3.6.1.4.1.10728.2.51.2.1.19 | Columnan50pmpLinkULStatBlksTot | read-only | mandatory | Blocks transmitted slave to master. |
| 1.3.6.1.4.1.10728.2.51.2.1.20 | Columnan50pmpLinkULStatBlksRetr | read-only | mandatory | Block re-transmitted slave to master. |
| 1.3.6.1.4.1.10728.2.51.2.1.21 | Columnan50pmpLinkULStatBlksDisc | read-only | mandatory | Blocks lost from slave to master. |
| 1.3.6.1.4.1.10728.2.51.2.1.22 | Columnan50pmpLinkULCIDStatPktDisc | read-only | mandatory | Packets discarded by slave due to buffer full. |
| 1.3.6.1.4.1.10728.2.51.2.1.23 | Columnan50pmpLinkULCIDStatPktTran | read-only | mandatory | Packets transmitted from slave to master. |
| 1.3.6.1.4.1.10728.2.51.2.1.24 | Columnan50pmpLinkULCIDStatPktRecv | read-only | mandatory | Packets received by master from slave. |
| 1.3.6.1.4.1.10728.2.51.2.1.25 | Columnan50pmpLinkUpTime | read-only | mandatory | Time since the link is UP (in hundreth a of second). |
| 1.3.6.1.4.1.10728.2.51.2.1.26 | Columnan50pmpLinkLostCount | read-only | mandatory | Number of times the link has been lost. |
| 1.3.6.1.4.1.10728.2.51.3 | Scalaran50pmpCIDSaveConfig | read-write | mandatory | The attribute saves the entire config set of the AN50 PMP. |
| 1.3.6.1.4.1.10728.2.51.4 | Scalaran50pmpLastModifiedCID | read-only | mandatory | The attribute represents the last modified CID. |
| 1.3.6.1.4.1.10728.2.51.5 | Scalaran50pmpLastMissedSsMacAddress | read-only | mandatory | MAC address of the SS that missed the registration with the BS. |
| 1.3.6.1.4.1.10728.2.51.6 | Scalaran50pmpLastRegisteredSsMacAddress | read-only | mandatory | MAC address of the last SS that successfuly registered with the BS. |
| 1.3.6.1.4.1.10728.2.51.7 | Scalaran50pmpLastSuccessfulID | read-only | mandatory | The ID of the Link registered in BS table that is sent through LastSuccessfulRegisteredSS Trap(number10). |
| 1.3.6.1.4.1.10728.2.51.8 | Scalaran50pmpLastDeniedSsMacAddress | read-write | mandatory | MAC address of the SS that will be denied by thisBS. |