REDLINE-E1T1-MIB
67 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10728 | Noderedline | |||
| 1.3.6.1.4.1.10728.1 | NoderedlineProducts | |||
| 1.3.6.1.4.1.10728.2 | NoderedlineMgmt | |||
| 1.3.6.1.4.1.10728.2.52 | NoderedlineE1T1 | |||
| 1.3.6.1.4.1.10728.2.52.1 | Nodee1t1General | |||
| 1.3.6.1.4.1.10728.2.52.1.1 | Scalare1t1VlanIdData | read-write | mandatory | VLAN ID for data on E1/T1 module |
| 1.3.6.1.4.1.10728.2.52.1.2 | Scalare1t1VlanIdVoice | read-write | mandatory | VLAN ID for voice on E1/T1 module |
| 1.3.6.1.4.1.10728.2.52.1.3 | Scalare1t1Clock | read-write | mandatory | Clocking information on the E1/T1 module |
| 1.3.6.1.4.1.10728.2.52.1.4 | Scalare1t1SyncOn | read-write | mandatory | The number of serial interface to be used as clocking reference. For AN-50 the number of serial interfaces is 4 |
| 1.3.6.1.4.1.10728.2.52.1.5 | Scalare1t1IdleCode | read-write | mandatory | Idle Code for unused timeslots on the E1/T1 module |
| 1.3.6.1.4.1.10728.2.52.1.6 | Scalare1t1Hostname | read-write | mandatory | E1/T1 host name |
| 1.3.6.1.4.1.10728.2.52.1.7 | Scalare1t1IpAddress | read-write | mandatory | E1/T1 IP address |
| 1.3.6.1.4.1.10728.2.52.1.8 | Scalare1t1IpMask | read-write | mandatory | E1/T1 IP mask |
| 1.3.6.1.4.1.10728.2.52.1.9 | Scalare1t1IpGateway | read-write | mandatory | E1/T1 gateway. |
| 1.3.6.1.4.1.10728.2.52.1.10 | Scalare1t1OptionKey | read-only | mandatory | E1/T1 Option Key. |
| 1.3.6.1.4.1.10728.2.52.1.11 | Scalare1t1Line | read-write | mandatory | The type of the line (T1/E1). |
| 1.3.6.1.4.1.10728.2.52.1.12 | Scalare1t1SoftwareVersion | read-only | mandatory | E1/T1 module Software Version. |
| 1.3.6.1.4.1.10728.2.52.2 | Tablee1t1SerialTable | not-accessible | mandatory | Table T1 / E1 Channels. |
| 1.3.6.1.4.1.10728.2.52.2.1 | Rowe1t1SerialEntry | not-accessible | mandatory | A unique set of link parameters. |
| 1.3.6.1.4.1.10728.2.52.2.1.1 | Columne1t1SerialID | read-only | mandatory | Serial ID. |
| 1.3.6.1.4.1.10728.2.52.2.1.2 | Columne1t1SerialCoding | read-write | mandatory | Serial Coding. |
| 1.3.6.1.4.1.10728.2.52.2.1.3 | Columne1t1SerialFraming | read-write | mandatory | Serial Framing. |
| 1.3.6.1.4.1.10728.2.52.2.1.4 | Columne1t1SerialLBO | read-write | mandatory | Serial LBO. |
| 1.3.6.1.4.1.10728.2.52.3 | Tablee1t1GroupTable | not-accessible | mandatory | Table E1 Groups. |
| 1.3.6.1.4.1.10728.2.52.3.1 | Rowe1t1GroupEntry | not-accessible | mandatory | A unique set of link parameters. |
| 1.3.6.1.4.1.10728.2.52.3.1.1 | Columne1t1GroupID | read-only | mandatory | Group ID. |
| 1.3.6.1.4.1.10728.2.52.3.1.2 | Columne1t1GroupTsBegin | read-write | mandatory | Group Ts Begin. |
| 1.3.6.1.4.1.10728.2.52.3.1.3 | Columne1t1GroupTsNum | read-write | mandatory | Group Ts Num. |
| 1.3.6.1.4.1.10728.2.52.3.1.4 | Columne1t1GroupDestGroup | read-write | mandatory | Group Destination. |
| 1.3.6.1.4.1.10728.2.52.3.1.5 | Columne1t1GroupDestIp | read-write | mandatory | Group Destination Ip Address. |
| 1.3.6.1.4.1.10728.2.52.3.1.6 | Columne1t1GroupJitterBuffer | read-write | mandatory | Group Jitter Buffer in ms. |
| 1.3.6.1.4.1.10728.2.52.3.1.7 | Columne1t1GroupPacketLength | read-write | mandatory | Group Jitter Buffer in bytes. |
| 1.3.6.1.4.1.10728.2.52.3.1.8 | Columne1t1GroupRowStatus | read-write | mandatory | Status of the row. |
| 1.3.6.1.4.1.10728.2.52.4 | Tablee1t1StatsTable | not-accessible | mandatory | Table of statistics for E1/T1 interfaces. |
| 1.3.6.1.4.1.10728.2.52.4.1 | Rowe1t1StatsEntry | not-accessible | mandatory | A unique set of statistics of link parameters. |
| 1.3.6.1.4.1.10728.2.52.4.1.1 | Columne1t1SerialStatsID | read-only | mandatory | Serial Interface Statistics ID. |
| 1.3.6.1.4.1.10728.2.52.4.1.2 | Columne1t1TdmsLOS | read-only | mandatory | E1/T1 module loss of signal. |
| 1.3.6.1.4.1.10728.2.52.4.1.3 | Columne1t1TdmsLFA | read-only | mandatory | E1/T1 module loss of framing alignment. |
| 1.3.6.1.4.1.10728.2.52.4.1.4 | Columne1t1TdmsLOMF | read-only | mandatory | E1/T1 module loss of multiframming. |
| 1.3.6.1.4.1.10728.2.52.4.1.5 | Columne1t1TdmsRAI | read-only | mandatory | E1/T1 module remote alarm indication. |
| 1.3.6.1.4.1.10728.2.52.4.1.6 | Columne1t1TdmsAIS | read-only | mandatory | E1/T1 module alarm indication signal. |
| 1.3.6.1.4.1.10728.2.52.4.1.7 | Columne1t1TdmsES | read-only | mandatory | E1/T1 module errored seconds. |
| 1.3.6.1.4.1.10728.2.52.4.1.8 | Columne1t1TdmsFEC | read-only | mandatory | E1/T1 module framing error counter. |
| 1.3.6.1.4.1.10728.2.52.4.1.9 | Columne1t1TdmsCVC | read-only | mandatory | E1/T1 module code violation counter. |
| 1.3.6.1.4.1.10728.2.52.5 | Nodee1t1Stats | |||
| 1.3.6.1.4.1.10728.2.52.5.1 | Scalare1t1EthRate | read-only | mandatory | Ethernet rate for the E1/T1 module. 0 = 10 Mbps 1 = 100 Mbps |
| 1.3.6.1.4.1.10728.2.52.5.2 | Scalare1t1EthMode | read-only | mandatory | E1/T1 module mode. 0 - half duplex 1 - full duplex |
| 1.3.6.1.4.1.10728.2.52.5.3 | Scalare1t1EthState | read-only | mandatory | E1/T1 module state. 0 - not connected 1 - connected |
| 1.3.6.1.4.1.10728.2.52.5.4 | Scalare1t1EthMAC | read-only | mandatory | E1/T1 module MAC Address. |
| 1.3.6.1.4.1.10728.2.52.5.5 | Scalare1t1EthFROK | read-only | mandatory | E1/T1 module frames received OK (FROK). |
| 1.3.6.1.4.1.10728.2.52.5.6 | Scalare1t1EthBROK | read-only | mandatory | E1/T1 module bytes received OK (BROK). |
| 1.3.6.1.4.1.10728.2.52.5.7 | Scalare1t1EthAERR | read-only | mandatory | E1/T1 module alignment errors (AERR). |
| 1.3.6.1.4.1.10728.2.52.5.8 | Scalare1t1EthCERR | read-only | mandatory | E1/T1 module CRC errors (CERR). |
| 1.3.6.1.4.1.10728.2.52.5.9 | Scalare1t1EthFTOK | read-only | mandatory | E1/T1 module frames transmitted OK (FTOK). |
| 1.3.6.1.4.1.10728.2.52.5.10 | Scalare1t1EthBTOK | read-only | mandatory | E1/T1 module bytes transmitted OK (BTOK). |
| 1.3.6.1.4.1.10728.2.52.5.11 | Scalare1t1EthSCOL | read-only | mandatory | E1/T1 module single collisions (SCOL). |
| 1.3.6.1.4.1.10728.2.52.5.12 | Scalare1t1EthMCOL | read-only | mandatory | E1/T1 module multiple collisions (MCOL). |
| 1.3.6.1.4.1.10728.2.52.5.13 | Scalare1t1EthTDEF | read-only | mandatory | E1/T1 module transmissions deferred (TDEF). |
| 1.3.6.1.4.1.10728.2.52.5.14 | Scalare1t1EthLCOL | read-only | mandatory | E1/T1 module late collisions (LCOL). |
| 1.3.6.1.4.1.10728.2.52.5.15 | Scalare1t1FanStatus | read-only | mandatory | T1E1 Fan Status (off/on). |
| 1.3.6.1.4.1.10728.2.52.5.16 | Scalare1t1LastSaveErr | read-only | mandatory | The Error code from the last TDM SAVE Command. |
| 1.3.6.1.4.1.10728.2.52.6 | Nodee1t1Commands | |||
| 1.3.6.1.4.1.10728.2.52.6.1 | Scalare1t1SaveConfig | read-write | mandatory | Save the running configuration in flash. |
| 1.3.6.1.4.1.10728.2.52.6.2 | Scalare1t1ActivateConfig | read-write | mandatory | Activate temporary configuration in running configuration. |
| 1.3.6.1.4.1.10728.2.52.6.3 | Scalare1t1ResetBoard | read-write | mandatory | Reset the E1/T1 module. |
| 1.3.6.1.4.1.10728.2.52.6.4 | Scalare1t1ResetStats | read-write | mandatory | Reset Statistics for the E1/T1 module. |
| 1.3.6.1.4.1.10728.2.52.6.5 | Scalare1t1ReStartConfig | read-write | mandatory | ReStart the configuration operation for the E1/T1 module. |