REDLINE-SYSTEM-MIB
97 objects
This MIB module contains Redline extensions to the SNMPv2 MIB System Group.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| REDLINE-MIB | redlineSystem |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10728.2.1.1 | IdentityredlineSystemMib | This MIB module contains Redline extensions to the SNMPv2 MIB System Group. | ||
| 1.3.6.1.4.1.10728.2.1.1.1 | NoderedlineSystemSystemObjects | |||
| 1.3.6.1.4.1.10728.2.1.1.1.1 | ScalarredlineSystemSerialNumber | read-only | current | The serial number of the unit. |
| 1.3.6.1.4.1.10728.2.1.1.1.2 | NoderedlineSystemSysControl | |||
| 1.3.6.1.4.1.10728.2.1.1.1.2.1 | ScalarredlineSystemSystemReboot | read-write | current | Setting this variable to 2 causes a reboot of the system. |
| 1.3.6.1.4.1.10728.2.1.1.1.3 | NoderedlineSystemSysDhcpObjects | |||
| 1.3.6.1.4.1.10728.2.1.1.1.3.1 | ScalarredlineSystemDHCPServerIpAddressType | read-write | current | The INET address type of Ip address of DHCP server. IPv4 type supported only. |
| 1.3.6.1.4.1.10728.2.1.1.1.3.2 | ScalarredlineSystemDHCPServerIpAddress | read-write | current | The INET address of DHCP server. Note: This object can not be set if usage of DHCP server is disabled. An attempt to set the address will fail and return 'reso… |
| 1.3.6.1.4.1.10728.2.1.1.1.4 | NoderedlineSystemSysIpObjects | |||
| 1.3.6.1.4.1.10728.2.1.1.1.4.1 | ScalarredlineSystemIpAddressType | read-write | current | The INET address type of Ip address of the system. IPv4 type supported only. |
| 1.3.6.1.4.1.10728.2.1.1.1.4.2 | ScalarredlineSystemIpAddress | read-write | current | The INET address of the system. Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the address will fail and return 'resour… |
| 1.3.6.1.4.1.10728.2.1.1.1.4.3 | ScalarredlineSystemSubnetMaskAddressType | read-write | current | The INET address type of subnet mask of the system. IPv4 type supported only. |
| 1.3.6.1.4.1.10728.2.1.1.1.4.4 | ScalarredlineSystemSubnetMask | read-write | current | The Subnet Mask of the system. Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the address will fail and return 'resourc… |
| 1.3.6.1.4.1.10728.2.1.1.1.4.5 | ScalarredlineSystemDefGatewayAddressType | read-write | current | The INET address type of the default gateway. IPv4 type supported only. |
| 1.3.6.1.4.1.10728.2.1.1.1.4.6 | ScalarredlineSystemDefGatewayAddress | read-write | current | The INET address of the default gateway. Note: This object can not be set if usage of DHCP server is enabled. An attempt to set the address will fail and retur… |
| 1.3.6.1.4.1.10728.2.1.1.1.5 | NoderedlineSystemSysSyslogObjects | |||
| 1.3.6.1.4.1.10728.2.1.1.1.5.1 | ScalarredlineSystemSyslogServerIpAddressType | read-write | current | The INET address type of Ip address of Syslog server. IPv4 type supported only. |
| 1.3.6.1.4.1.10728.2.1.1.1.5.2 | ScalarredlineSystemSyslogServerIpAddress | read-write | current | The INET address of Syslog server. Note: Entering '0.0.0.0' as an address will indicate to the system that Syslog capability is not to be used. |
| 1.3.6.1.4.1.10728.2.1.1.2 | NoderedlineSystemSoftwareObjects | |||
| 1.3.6.1.4.1.10728.2.1.1.2.1 | ScalarredlineSystemSwActiveVersion | read-only | current | The s/w version of the active (running) image. |
| 1.3.6.1.4.1.10728.2.1.1.2.2 | ScalarredlineSystemSwAlternateVersion | read-only | current | The s/w version of the alternate (non-active) image. |
| 1.3.6.1.4.1.10728.2.1.1.2.3 | ScalarredlineSystemSwActivateAlternate | read-write | current | Setting this to 2 triggers the switch-over to the alternate s/w image and reboot of the system. Before the switch-over a validation of the alternate image is p… |
| 1.3.6.1.4.1.10728.2.1.1.2.4 | TableredlineSystemSwSyncAlternateTable | not-accessible | current | This table contains at most one entry representing a software synchronization process that is either currently in progress or one that was completed. When requ… |
| 1.3.6.1.4.1.10728.2.1.1.2.4.1 | RowredlineSystemSwSyncAlternateEntry | not-accessible | current | This entry contains information about a current or last software synchronization. |
| 1.3.6.1.4.1.10728.2.1.1.2.4.1.1 | ColumnredlineSystemSwSyncAlternateIndex | not-accessible | current | The index of the software isynchronization table. The only value allowed is 1. |
| 1.3.6.1.4.1.10728.2.1.1.2.4.1.2 | ColumnredlineSystemSwSyncAlternate | read-write | current | Setting it to 2 will synchronize the alternate s/w image and configuration database, i.e. the active s/w image and the active configuration are copied to the a… |
| 1.3.6.1.4.1.10728.2.1.1.2.4.1.3 | ColumnredlineSystemSwSyncAlternateStatus | read-only | current | The status of the current or last software synchronization. |
| 1.3.6.1.4.1.10728.2.1.1.2.4.1.4 | ColumnredlineSystemSwSyncAlternateTimeEnded | read-only | current | The date and time this software synchronization finished. |
| 1.3.6.1.4.1.10728.2.1.1.2.5 | TableredlineSystemSwDownloadTable | not-accessible | current | This table contains at most one entry representing a software download process that is either currently in progress or one that was completed. A management sta… |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1 | RowredlineSystemSwDownloadEntry | not-accessible | current | This entry contains information about a current or last software download. |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1.1 | ColumnredlineSystemSwDownloadIndex | not-accessible | current | The index of the software download table. The only value allowed is 1. |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1.2 | ColumnredlineSystemSwDownloadFtpAddressType | read-create | current | The INET address type of the software upgrade FTP server. IPv4 type supported only. |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1.3 | ColumnredlineSystemSwDownloadFtpAddress | read-create | current | The INET address of the FTP server. |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1.4 | ColumnredlineSystemSwDownloadFtpUser | read-create | current | The FTP user name. |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1.5 | ColumnredlineSystemSwDownloadFtpPassword | read-create | current | The FTP user password. After this object is created it is not accessible. |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1.6 | ColumnredlineSystemSwDownloadFtpFile | read-create | current | The full software image file path name as required by the FTP server. |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1.7 | ColumnredlineSystemSwDownloadStatus | read-only | current | The status of the current or last software download. |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1.8 | ColumnredlineSystemSwDownloadTimeEnded | read-only | current | The date and time this software download finished. |
| 1.3.6.1.4.1.10728.2.1.1.2.5.1.9 | ColumnredlineSystemSwDownloadFailureReason | read-only | current | The short explanation of why software download failed. In a case of success this object will contain empty string. |
| 1.3.6.1.4.1.10728.2.1.1.3 | NoderedlineSystemConfigurationObjects | |||
| 1.3.6.1.4.1.10728.2.1.1.3.1 | TableredlineSystemConfigBackupTable | not-accessible | current | This table contains at most one entry representing a configuration backup process that is either currently in progress or one that was completed. A management … |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1 | RowredlineSystemConfigBackupEntry | not-accessible | current | This entry contains information about a current or last configuration backup. |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1.1 | ColumnredlineSystemConfigBackupIndex | not-accessible | current | The index of the software download table. The only value allowed is 1. |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1.2 | ColumnredlineSystemConfigBackupConfigType | read-create | current | Specifies the type of configuration to be backup. |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1.3 | ColumnredlineSystemConfigBackupFtpAddressType | read-create | current | The INET address type of the configuration backup FTP server. IPv4 type supported only. |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1.4 | ColumnredlineSystemConfigBackupFtpAddress | read-create | current | The INET address of the FTP server. |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1.5 | ColumnredlineSystemConfigBackupFtpUser | read-create | current | The FTP user name. |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1.6 | ColumnredlineSystemConfigBackupFtpPassword | read-create | current | The FTP user password. After this object is created it is not accessible. |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1.7 | ColumnredlineSystemConfigBackupFtpFile | read-create | current | The full software image file path name as required by the FTP server. |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1.8 | ColumnredlineSystemConfigBackupStatus | read-only | current | The status of the current or last configuration backup. |
| 1.3.6.1.4.1.10728.2.1.1.3.1.1.9 | ColumnredlineSystemConfigBackupFailureReason | read-only | current | The short explanation of why configuration backup failed. In a case of success this object will contain empty string. |
| 1.3.6.1.4.1.10728.2.1.1.3.2 | TableredlineSystemConfigRestoreTable | not-accessible | current | This table contains at most one entry representing a configuration restore process that is either currently in progress or one that was completed. A management… |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1 | RowredlineSystemConfigRestoreEntry | not-accessible | current | This entry contains information about a current or last configuration restore. |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1.1 | ColumnredlineSystemConfigRestoreIndex | not-accessible | current | The index of the software download table. The only value allowed is 1. |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1.2 | ColumnredlineSystemConfigRestoreConfigType | read-create | current | Specifies the type of configuration to be restored. |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1.3 | ColumnredlineSystemConfigRestoreFtpAddressType | read-create | current | The INET address type of the configuration restore FTP server. IPv4 type supported only. |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1.4 | ColumnredlineSystemConfigRestoreFtpAddress | read-create | current | The INET address of the FTP server. |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1.5 | ColumnredlineSystemConfigRestoreFtpUser | read-create | current | The FTP user name. |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1.6 | ColumnredlineSystemConfigRestoreFtpPassword | read-create | current | The FTP user password. After this object is created it is not accessible. |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1.7 | ColumnredlineSystemConfigRestoreFtpFile | read-create | current | The full software image file path name as required by the FTP server. |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1.8 | ColumnredlineSystemConfigRestoreStatus | read-only | current | The status of the current or last configuration restore. |
| 1.3.6.1.4.1.10728.2.1.1.3.2.1.9 | ColumnredlineSystemConfigRestoreFailureReason | read-only | current | The short explanation of why configuration restore failed. In a case of success this object will contain empty string. |
| 1.3.6.1.4.1.10728.2.1.1.4 | NoderedlineSystemNotificationObjects | |||
| 1.3.6.1.4.1.10728.2.1.1.4.1 | NoderedlineSystemTrapControl | |||
| 1.3.6.1.4.1.10728.2.1.1.4.1.1 | TableredlineSystemTrapReceiverTable | not-accessible | current | This table contains information about provisioned trap receivers i.e. the trap receivers that this agent will send notifications to. The entries of this table … |
| 1.3.6.1.4.1.10728.2.1.1.4.1.1.1 | RowredlineSystemTrapReceiverEntry | not-accessible | current | This entry contains information about a provisioned trap receiver (a trap destination from the agent's point of view. |
| 1.3.6.1.4.1.10728.2.1.1.4.1.1.1.1 | ColumnredlineSystemTrapReceiverIndex | not-accessible | current | |
| 1.3.6.1.4.1.10728.2.1.1.4.1.1.1.2 | ColumnredlineSystemTrapReceiverAddressType | read-create | current | The INET address type of the trap receiver. |
| 1.3.6.1.4.1.10728.2.1.1.4.1.1.1.3 | ColumnredlineSystemTrapReceiverAddress | read-create | current | The INET address of the trap receiver. |
| 1.3.6.1.4.1.10728.2.1.1.4.1.1.1.4 | ColumnredlineSystemTrapReceiverPort | read-create | current | The UDP port of the trap receiver. |
| 1.3.6.1.4.1.10728.2.1.1.4.1.1.1.5 | ColumnredlineSystemTrapReceiverCommunity | read-create | current | The community string of the trap receiver. |
| 1.3.6.1.4.1.10728.2.1.1.4.1.1.1.6 | ColumnredlineSystemTrapReceiverStatus | read-create | current | This object is used to create and delete rows in the redlineSystemTrapReceiverTable table. Only the 'createAndGo' and 'destroy' values can be specified in a se… |
| 1.3.6.1.4.1.10728.2.1.1.4.1.2 | TableredlineSystemTrapActivationTable | not-accessible | current | This table contains information about trap activation in the system i.e. the trap generation can be enabled or disabled. The entries of this table are indexed … |
| 1.3.6.1.4.1.10728.2.1.1.4.1.2.1 | RowredlineSystemTrapActivationEntry | not-accessible | current | This entry contains information about trap acgtivation state. |
| 1.3.6.1.4.1.10728.2.1.1.4.1.2.1.1 | ColumnredlineSystemTrapObjectID | not-accessible | current | Identifies the trap which generation is to be controlled by this entry. |
| 1.3.6.1.4.1.10728.2.1.1.4.1.2.1.2 | ColumnredlineSystemTrapEnable | read-write | current | Indicates whether the system is permitted to generate traps specified by this entry. |
| 1.3.6.1.4.1.10728.2.1.1.4.1.999 | ScalarredlineSystemPingTrapTrigger | read-write | current | Causes a ping trap to be sent |
| 1.3.6.1.4.1.10728.2.1.1.4.2 | NoderedlineSystemTrapObjects | |||
| 1.3.6.1.4.1.10728.2.1.1.4.2.1 | ScalarredlineSystemSwDownloadProgress | accessible-for-notify | current | The software download progress states. |
| 1.3.6.1.4.1.10728.2.1.1.4.3 | NoderedlineSystemTrapDefinitions | |||
| 1.3.6.1.4.1.10728.2.1.1.4.3.1 | NotificationredlineSWUpgradeStatusTrap | current | Event that reports SW Upgrade progress and status changes. | |
| 1.3.6.1.4.1.10728.2.1.1.4.3.999 | NotificationredlineSystemPingTrap | current | A ping trap notification. | |
| 1.3.6.1.4.1.10728.2.1.1.5 | NoderedlineSystemAccessControlObjects | |||
| 1.3.6.1.4.1.10728.2.1.1.5.5 | TableredlineSystemAccessCtrlTable | not-accessible | current | This table contains a list of hosts which are allowed to access the system. Each entry associated with the host, has ip address and read and write passwords. O… |
| 1.3.6.1.4.1.10728.2.1.1.5.5.1 | RowredlineSystemAccessCtrlEntry | not-accessible | current | This entry contains privacy information about a host allowed to access the system. |
| 1.3.6.1.4.1.10728.2.1.1.5.5.1.1 | ColumnredlineSystemAccessCtrlIndex | not-accessible | current | The index of the Snmp Access Control table. |
| 1.3.6.1.4.1.10728.2.1.1.5.5.1.2 | ColumnredlineSystemAccessCtrlManagerIpAddrType | read-create | current | The INET address type of the host allowed to access the system. IPv4 type supported only. |
| 1.3.6.1.4.1.10728.2.1.1.5.5.1.3 | ColumnredlineSystemAccessCtrlManagerIpAddr | read-create | current | The INET address of the host allowed to access the system. |
| 1.3.6.1.4.1.10728.2.1.1.5.5.1.4 | ColumnredlineSystemAccessCtrlReadCommunity | read-create | current | The read community string associated with redlineSystemAccessCtrlManagerIpAddress. |
| 1.3.6.1.4.1.10728.2.1.1.5.5.1.5 | ColumnredlineSystemAccessCtrlWriteCommunity | read-create | current | The write community string associated with redlineSystemAccessCtrlManagerIpAddress. |
| 1.3.6.1.4.1.10728.2.1.1.5.5.1.6 | ColumnredlineSystemAccessCtrlStatus | read-create | current | This object is used to create and delete rows in the redlineSystemTrapReceiverTable table. Only the 'createAndGo' and 'destroy' values can be specified in a se… |
| 1.3.6.1.4.1.10728.2.1.1.6 | NoderedlineSystemConformance | |||
| 1.3.6.1.4.1.10728.2.1.1.6.1 | NoderedlineSystemGroups | |||
| 1.3.6.1.4.1.10728.2.1.1.6.1.1 | GroupredlineSystemBasicGroup | current | Basic objects. | |
| 1.3.6.1.4.1.10728.2.1.1.6.1.2 | GroupredlineSystemNotificationGroup | current | ||
| 1.3.6.1.4.1.10728.2.1.1.6.2 | NoderedlineSystemCompls | |||
| 1.3.6.1.4.1.10728.2.1.1.6.2.1 | ComplianceredlineSystemCompliance | current | The compliance statement for SNMP entities that implement this MIB module. |