REPEATER-MIB-2
210 objects
No module-level DESCRIPTION found.
Imported Objects
| IRM-OIDS | commonRev1 product repeaterRev1 repeaterRev2 subSysMMAC sysChassis sysRepeaters |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter NetworkAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.1.1.1.1 | ScalardeviceType | read-only | mandatory | This object defines the board type for the Management board in the device. (eg. IRBM, IRM). See appendix A for values. |
| 1.3.6.1.4.1.52.1.1.1.2 | ScalardeviceName | read-write | mandatory | An ASCII name of the device that this agent manages. |
| 1.3.6.1.4.1.52.1.1.1.3 | ScalardeviceIPAddress | read-write | mandatory | The Internet address of this device. Write access is granted only if SuperUser access is used. |
| 1.3.6.1.4.1.52.1.1.1.4 | ScalarcurrentTime | read-write | optional | The current time of day as measured by the device in HHMMSS format. |
| 1.3.6.1.4.1.52.1.1.1.5 | ScalarcurrentDate | read-write | optional | The current date as measured by the device in MMDDYYYY format. |
| 1.3.6.1.4.1.52.1.1.1.6 | ScalarmACAddress | read-only | mandatory | The MAC (Ethernet) address of the MMAC. This can also be obtained from address translation MIB. |
| 1.3.6.1.4.1.52.1.1.2.2.1 | NodesoidIRMSNMP | |||
| 1.3.6.1.4.1.52.1.1.2.2.2 | NodesoidIRBM | |||
| 1.3.6.1.4.1.52.1.1.2.2.3 | NodesoidIRM2 | |||
| 1.3.6.1.4.1.52.1.1.2.3.1 | NodesoidMINIMMAC | |||
| 1.3.6.1.4.1.52.1.1.2.3.2 | NodesoidMRXI | |||
| 1.3.6.1.4.1.52.1.2.1.1 | Nodedevice | |||
| 1.3.6.1.4.1.52.1.2.1.1.2 | ScalardeviceMMACType | read-only | mandatory | Indicates the type of MMAC. |
| 1.3.6.1.4.1.52.1.2.1.1.3 | ScalardeviceSlots | read-only | mandatory | Number of available slots in this device including the IRM slot. |
| 1.3.6.1.4.1.52.1.2.1.1.4 | ScalardeviceOccupiedSlots | read-only | mandatory | The slots that contain MIM boards. This field is bit encoded (eg. If a bit is set then that board is present. For example, a value of 3 indicates that there ar… |
| 1.3.6.1.4.1.52.1.2.1.1.5 | ScalardevicePortsOn | read-write | mandatory | A read will return the number of adminstratively ON ports for the device. A write of a 1 will administratively enable all the ports on the device, except for r… |
| 1.3.6.1.4.1.52.1.2.1.1.6 | ScalardeviceTotalPorts | read-only | mandatory | The total number of ports in the MMAC. |
| 1.3.6.1.4.1.52.1.2.1.1.7 | ScalardeviceTotalPkts | read-only | mandatory | The number of packets detected on all ports of this device. |
| 1.3.6.1.4.1.52.1.2.1.1.8 | ScalardeviceTotalErrors | read-only | optional | The sum of all alignment, CRC, out-of-window collisions, runt, and giant errors detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.9 | ScalardeviceTransmitColls | read-only | optional | The number of transmit collisions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.10 | ScalardeviceRecColls | read-only | optional | The number of receive collsions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.11 | ScalardeviceAligns | read-only | optional | The number of packets with alignment errors detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.12 | ScalardeviceCRCs | read-only | optional | The number of packets with bad CRC detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.13 | ScalardeviceRunts | read-only | optional | The number of runt frames detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.14 | ScalardeviceOOWColls | read-only | optional | The number of out-of-window collisions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.15 | ScalardeviceNoResources | read-only | optional | The number of no resource condtions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.16 | ScalardeviceRecBytes | read-only | optional | The number of bytes detected on the network by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.17 | ScalardeviceGiantFrames | read-only | optional | The number of longer than 1518 byte packets detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.18 | ScalardeviceRestart | read-write | mandatory | A read will return 0. A set of 0 will restart the device. |
| 1.3.6.1.4.1.52.1.2.1.1.19 | ScalardeviceResetCounters | read-write | mandatory | A read will return 0. A set of 0 will reset all the counters for the device, boards and ports. |
| 1.3.6.1.4.1.52.1.2.1.1.20 | ScalardeviceRedundantCts | read-only | optional | The number of redundant circuits available for use. |
| 1.3.6.1.4.1.52.1.2.1.1.24 | ScalardeviceTimeBase | read-write | optional | The number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs. There isn't a maximum. |
| 1.3.6.1.4.1.52.1.2.1.1.25 | ScalardeviceResetRedundancy | read-write | optional | A read will return 0. A set of a 1 will reset redundancy for the entire box. |
| 1.3.6.1.4.1.52.1.2.1.1.26 | ScalardeviceSrcAddrAgingTime | read-write | optional | The number of minutes that a source address is not detected before it is removed from the source address table. The minimum is 1 minute and the maximum is 1440… |
| 1.3.6.1.4.1.52.1.2.1.1.27 | ScalardeviceSrcAddrTraps | read-write | optional | Controls sending of source address related traps. |
| 1.3.6.1.4.1.52.1.2.1.1.28 | ScalardeviceSrcAddrLocked | read-write | optional | A set of 2 will disable all ports that support link status but do not have link active, or is segmented. The first source address seen on each of the remaining… |
| 1.3.6.1.4.1.52.1.2.1.1.29 | ScalardeviceEnetBoardMap | read-only | mandatory | The slots that contain Ethernet MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is an Ethernet MIM.) For example, a … |
| 1.3.6.1.4.1.52.1.2.1.1.30 | ScalardeviceTokenRingBoardMap | read-only | mandatory | The slots that contain Token Ring MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a Token Ring MIM.) For example,… |
| 1.3.6.1.4.1.52.1.2.1.1.31 | ScalardeviceFDDIBoardMap | read-only | mandatory | The slots that contain FDDI MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a FDDI MIM.) For example, a value of … |
| 1.3.6.1.4.1.52.1.2.1.1.32 | ScalardeviceRestoreDefaults | read-write | optional | A get will return 0. A set of 0 will restore all of battery backed RAM to factory defaults, with the execption of the IP address, the community table and the m… |
| 1.3.6.1.4.1.52.1.2.1.1.33 | ScalardeviceActiveUsers | read-only | optional | The number of active users seen on this device. |
| 1.3.6.1.4.1.52.1.2.1.1.48 | ScalardeviceBroadPkts | read-only | optional | The sum of all of the broadcast packets detected on all ports of this device. |
| 1.3.6.1.4.1.52.1.2.1.1.49 | ScalardeviceMultPkts | read-only | optional | The sum of all of the multicast packets detected on all ports of this device. |
| 1.3.6.1.4.1.52.1.2.1.1.51 | ScalardeviceThdPartyOccupiedSlots | read-only | optional | The slots that contain Third Party MIM boards. This field is bit encoded (eg. if a bit is set then that board is present and is a Third Party MIM.) For example… |
| 1.3.6.1.4.1.52.1.2.1.1.52 | ScalardeviceImimOccupiedSlots | read-only | optional | The slots that contain IMIM boards. This field is bit encoded (eg. if a bit is set then that board is present and is an IMIM). For example, a value of 4 indica… |
| 1.3.6.1.4.1.52.1.2.1.1.54 | ScalardeviceLinkTraps | read-write | optional | Controls sending of link related traps. |
| 1.3.6.1.4.1.52.1.2.1.1.55 | ScalardeviceSegTraps | read-write | optional | Controls sending of seg related traps. |
| 1.3.6.1.4.1.52.1.2.1.1.56 | ScalarctIPDefaultFrameType | read-write | mandatory | Defines the default frame type that will be used by the device. A device will understand both frame types and will respond based upon the framing type that is … |
| 1.3.6.1.4.1.52.1.2.1.2 | Nodeboard | |||
| 1.3.6.1.4.1.52.1.2.1.3 | Nodeport | |||
| 1.3.6.1.4.1.52.1.2.1.7 | NodesourceAddr | |||
| 1.3.6.1.4.1.52.1.2.1.7.1 | ScalarsourceAddrBoard | read-only | mandatory | The board number of the port that the supplied source address has been seen on. |
| 1.3.6.1.4.1.52.1.2.1.7.2 | ScalarsourceAddrPort | read-only | mandatory | The port number of the port that the supplied source address has been seen on. |
| 1.3.6.1.4.1.52.1.2.1.8 | Noderedundancy | |||
| 1.3.6.1.4.1.52.1.2.1.8.1 | ScalarredundancyPollInterval | read-write | mandatory | The number of seconds between polls for redundancy. The minimum is 0 and the maximum is 99. |
| 1.3.6.1.4.1.52.1.2.1.8.2 | ScalarredundancyTestTod | read-write | mandatory | The time of day at which the redundant circuits should be tested. |
| 1.3.6.1.4.1.52.1.2.1.8.3 | ScalarredundancyPerformTest | read-write | mandatory | A read will return a 0. A set of a 1 will test the redundant circuits now. |
| 1.3.6.1.4.1.52.1.2.1.8.4 | ScalarredundancyCircuitName | read-write | mandatory | The name of the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.5 | ScalarredundancyRetryCount | read-write | mandatory | The number of unanswered polls allowed for the indicated circuit before the current connection is declared bad. The minimum is 0 the maximum is 16. |
| 1.3.6.1.4.1.52.1.2.1.8.6 | ScalarredundancyNumBPs | read-only | mandatory | The number of board/port combinations associated with the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.7 | ScalarredundancyCircuitBoards | read-only | mandatory | The boards associated with the indicated circuit, accessed by index. Note: The instance identifier for this object is the circuit number followed by an index. … |
| 1.3.6.1.4.1.52.1.2.1.8.8 | ScalarredundancyCircuitPort | read-only | mandatory | The ports associated with the indicated circuit, accessed by index. Note: The instance identifier for this object is the circuit number followed by an index. T… |
| 1.3.6.1.4.1.52.1.2.1.8.9 | ScalarredundancyCircuitTypes | read-only | mandatory | The type of each port associated with the indicated circuit, accessed by index. Note: The instance identifier for this object is the circuit number followed by… |
| 1.3.6.1.4.1.52.1.2.1.8.10 | ScalarredundancyCircuitNumAddr | read-only | mandatory | The number of addresses associated with the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.11 | ScalarredundancyCircuitMACAddrAdd | read-write | mandatory | A get will return a null string. A set adds an ethernet address to the polling list for the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.12 | ScalarredundancyCircuitMACAddrDel | read-write | mandatory | A get will return a null string. A set deletes an ethernet address from the polling list for the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.13 | ScalarredundancyCircuitMACAddrDisp | read-only | mandatory | The ethernet addresses associated with the indicated circuit, accessed by index. Note: The instance identifier for this object is the circuit number followed b… |
| 1.3.6.1.4.1.52.1.2.1.8.14 | ScalarredundancyCircuitEnable | read-write | mandatory | Enables and disables the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.15 | ScalarredundancyCircuitReset | read-write | mandatory | A get will return 0. A set of 1 will reset the indicated circuit, return all of the associated board and ports to NOT-USED, remove associated addresses from th… |
| 1.3.6.1.4.1.52.1.2.1.9 | Nodealarm | |||
| 1.3.6.1.4.1.52.1.2.1.9.1 | NodedevAlrm | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.1 | NodedevTraffic | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.1.1 | ScalardevTrafficEnable | read-write | mandatory | Enable or disable the checking for device level traffic thresholds getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.1.1.2 | ScalardevTrafficThreshold | read-write | mandatory | The number of packets detected by the device within the device timebase that will cause a device traffic alarm trap to be sent. The minimum is 0. There isn't a… |
| 1.3.6.1.4.1.52.1.2.1.9.1.2 | NodedevColls | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.2.1 | ScalardevCollsEnable | read-write | mandatory | Enable or disable the checking for device level collision thresholds getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.1.2.2 | ScalardevCollsThreshold | read-write | mandatory | The number of collisions per good packet detected by the device within the device timebase that will cause a device collision alarm trap to be sent. The minimu… |
| 1.3.6.1.4.1.52.1.2.1.9.1.3 | NodedevError | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.3.1 | ScalardevErrorEnable | read-write | mandatory | Enable or disable the checking for device level error thresholds getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.1.3.2 | ScalardevErrorThreshold | read-write | mandatory | The percentage of errors per good packet detected by the device within the device timebase that will cause a device error alarm trap to be sent. The minimum is… |
| 1.3.6.1.4.1.52.1.2.1.9.1.3.3 | ScalardevErrorSource | read-write | mandatory | The type of errors used for the device error alarm. The INTEGER is a bit encoded version of which errors to include in the error sum. The bits are encoded as f… |
| 1.3.6.1.4.1.52.1.2.1.9.1.4 | NodedevBroad | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.4.1 | ScalardevBroadEnable | read-write | mandatory | Enable the sending of device level broadcast traps. |
| 1.3.6.1.4.1.52.1.2.1.9.1.4.2 | ScalardevBroadThreshold | read-write | mandatory | The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2 | NodebdAlrm | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.1 | NodebdTraffic | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.1.1 | ScalarbdTrafficEnable | read-write | mandatory | Enable or disable the checking for board level traffic thresholds getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.2.1.2 | ScalarbdTrafficThreshold | read-write | mandatory | The number of packets detected by the specified board within the device timebase that will cause a board traffic alarm trap to be sent. The minimum is 0. There… |
| 1.3.6.1.4.1.52.1.2.1.9.2.1.3 | ScalarbdTrafficBdDisable | read-write | mandatory | Permits a board to be disabled on a traffic threshold getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.2.2 | NodebdColls | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.2.1 | ScalarbdCollsEnable | read-write | mandatory | Enable or disable the checking for board level collision thresholds getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.2.2.2 | ScalarbdCollsThreshold | read-write | mandatory | The number of collisions per good packet detected by the specified board within the device timebase that will cause a board collision alarm trap to be sent. Th… |
| 1.3.6.1.4.1.52.1.2.1.9.2.2.3 | ScalarbdCollsBdDisable | read-write | mandatory | Permits a board to be disabled on a collision threshold getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.2.3 | NodebdError | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.3.1 | ScalarbdErrorEnable | read-write | mandatory | Enable or disable the checking for board level error thresholds getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.2.3.2 | ScalarbdErrorThreshold | read-write | mandatory | The percentage of errors per good packet detected by the specified board within the device timebase that will cause a board error alarm trap to be sent. The mi… |
| 1.3.6.1.4.1.52.1.2.1.9.2.3.3 | ScalarbdErrorSource | read-write | mandatory | The type of errors used for the board error alarm. The INTEGER is a bit encoded version of which errors to include in the error sum. The bits are encoded as fo… |
| 1.3.6.1.4.1.52.1.2.1.9.2.3.4 | ScalarbdErrorBdDisable | read-write | mandatory | Permits a board to be disabled on an error threshold getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.2.4 | NodebdBroad | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.4.1 | ScalarbdBroadEnable | read-write | mandatory | Enable the sending of board level broadcast traps for this board. |
| 1.3.6.1.4.1.52.1.2.1.9.2.4.2 | ScalarbdBroadThreshold | read-write | mandatory | The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2.4.3 | ScalarbdBroadDisable | read-write | mandatory | Permit a board to be disabled on a broadcast threshold alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3 | NodeportAlrm | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.1 | NodeportTraffic | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.1.1 | ScalarportTrafficEnable | read-write | mandatory | Enable or disable the checking for port level traffic thresholds getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.3.1.2 | ScalarportTrafficThreshold | read-write | mandatory | The number of packets detected by the specified port within the device timebase that will cause a port traffic alarm trap to be sent. The minimum is 0. There i… |
| 1.3.6.1.4.1.52.1.2.1.9.3.1.3 | ScalarportTrafficPortDisable | read-write | mandatory | Permits a port to be disabled on a traffic threshold getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.3.2 | NodeportColls | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.2.1 | ScalarportCollsEnable | read-write | mandatory | Enable or disable the checking for port level collision thresholds getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.3.2.2 | ScalarportCollsThreshold | read-write | mandatory | The number of collisions per good packet detected by the specified port within the device timebase that will cause a port collision alarm trap to be sent. The … |
| 1.3.6.1.4.1.52.1.2.1.9.3.2.3 | ScalarportCollsPortDisable | read-write | mandatory | Permits a port to be disabled on a collision threshold getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.3.3 | NodeportError | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.3.1 | ScalarportErrorEnable | read-write | mandatory | Enable or disable the checking for port level error thresholds getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.3.3.2 | ScalarportErrorThreshold | read-write | mandatory | The percentage of errors per good packet detected by the specified port within the device timebase that will cause a port error alarm trap to be sent. The mini… |
| 1.3.6.1.4.1.52.1.2.1.9.3.3.3 | ScalarportErrorSource | read-write | mandatory | The type of errors used for the port error alarm. The INTEGER is a bit encoded version of which errors to include in the error sum. The bits are encoded as fol… |
| 1.3.6.1.4.1.52.1.2.1.9.3.3.4 | ScalarportErrorPortDisable | read-write | mandatory | Permits a port to be disabled on an error threshold getting exceeded. |
| 1.3.6.1.4.1.52.1.2.1.9.3.4 | NodeportBroad | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.4.1 | ScalarportBroadEnable | read-write | mandatory | Enable the sending of port level broadcast alarms. |
| 1.3.6.1.4.1.52.1.2.1.9.3.4.2 | ScalarportBroadThreshold | read-write | mandatory | The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3.4.3 | ScalarportBroadDisable | read-write | mandatory | Permit a port to be disabled on a broadcast threshold alarm. |
| 1.3.6.1.4.1.52.1.2.2.1 | Noderr2device | |||
| 1.3.6.1.4.1.52.1.2.2.1.1 | NodecommonD | |||
| 1.3.6.1.4.1.52.1.2.2.1.2 | NodeethernetD | |||
| 1.3.6.1.4.1.52.1.2.2.1.3 | NodetokenRingD | |||
| 1.3.6.1.4.1.52.1.2.2.1.3.1 | ScalardeviceTRTokenRingPortsOn | read-only | deprecated | The number of Token Ring Ports (i.e. station, Ring In and Ring Out ports) administratively ON for this device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.2 | ScalardeviceTRTotalTokenRingPorts | read-only | deprecated | The total number of Token Ring Ports (i.e. station, Ring In and Ring Out ports) on this device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.3 | ScalardeviceTRTotalTokenRingRingPortsOn | read-only | deprecated | The total number of Ring In and Ring Out ports (active) administratively ON for this device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.4 | ScalardeviceTRTotalTokenRingRingPorts | read-only | deprecated | The total number of Ring In and Ring Out ports on this device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.5 | ScalardeviceTRTotalTokenRingRings | read-only | deprecated | The total number of (Token Ring) rings formed on this device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.6 | ScalardeviceTRTotalTokenRingBoards | read-only | deprecated | The total number of Token Ring MIMs in the MMAC. |
| 1.3.6.1.4.1.52.1.2.2.1.3.7 | ScalardeviceTRTokenRingBoardMap | read-only | deprecated | The slots that contain Token Ring MIM boards. This field is bit encoded (e.g. If a bit is set then that board is present and is a Token Ring MIM.) For example,… |
| 1.3.6.1.4.1.52.1.2.2.2 | Nodenetwork | |||
| 1.3.6.1.4.1.52.1.2.2.3 | Noderr2board | |||
| 1.3.6.1.4.1.52.1.2.2.3.1 | NodecommonB | |||
| 1.3.6.1.4.1.52.1.2.2.3.1.1 | ScalarboardIndex | read-only | mandatory | The slot number of this board. |
| 1.3.6.1.4.1.52.1.2.2.3.1.2 | ScalarboardName | read-write | mandatory | The name of the board. This field will only contain printable ASCII characters. |
| 1.3.6.1.4.1.52.1.2.2.3.1.3 | ScalarboardType | read-only | mandatory | The type of the MIM. (eg. FOT, TPT, etc). See appendix A for encoding. |
| 1.3.6.1.4.1.52.1.2.2.3.1.4 | ScalarboardTotalPorts | read-only | mandatory | Total number of ports supported on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.1.6 | ScalarboardPortsOn | read-write | mandatory | A read will return the number of adminstratively ON ports for the board. A write of a 2 will administratively enable all the ports on the board, except for red… |
| 1.3.6.1.4.1.52.1.2.2.3.1.8 | ScalarboardActiveUsers | read-only | mandatory | The number of active users seen on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2 | NodeethernetB | |||
| 1.3.6.1.4.1.52.1.2.2.3.2.1 | ScalarboardTotalPkts | read-only | mandatory | The number of packets detected on all ports of this port. |
| 1.3.6.1.4.1.52.1.2.2.3.2.2 | ScalarboardTotalErrors | read-only | mandatory | The sum of all alignment, CRC, out-of-window collisions, runt, and giant errors detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.3 | ScalarboardTransColls | read-only | mandatory | The number of transmit collisions detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.4 | ScalarboardRecColls | read-only | mandatory | The number of receive collsions detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.5 | ScalarboardAligns | read-only | mandatory | The number of packets with alignment errors detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.6 | ScalarboardCRCs | read-only | mandatory | The number of packets with bad CRC detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.7 | ScalarboardRunts | read-only | mandatory | The number of runt frames detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.8 | ScalarboardOOWColls | read-only | mandatory | The number of out-of-window collisions detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.9 | ScalarboardNoResources | read-only | mandatory | The number of no resource condtions detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.10 | ScalarboardRecBytes | read-only | mandatory | The number of bytes detected on the network by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.11 | ScalarboardGiants | read-only | mandatory | The number of longer than 1518 byte packets detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.26 | ScalarboardBroadPkts | read-only | mandatory | The number broadcast packets detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.27 | ScalarboardMultPkts | read-only | mandatory | The number multicast packets detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.3 | NodetokenRingB | |||
| 1.3.6.1.4.1.52.1.2.2.3.3.1 | ScalarboardTotalRingPorts | read-only | deprecated | The total number of ring ports on this board. Currently, zero or two. |
| 1.3.6.1.4.1.52.1.2.2.3.3.2 | ScalarboardTotalStationPorts | read-only | deprecated | The total number of station ports on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.3.3 | ScalarboardModeStatus | read-write | deprecated | The board mode. |
| 1.3.6.1.4.1.52.1.2.2.3.3.4 | ScalarboardTotalRingPortsOn | read-only | deprecated | The number of administartively ON ring ports on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.3.5 | ScalarboardTotalStationPortsOn | read-only | deprecated | The number of administartively ON station ports on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.3.6 | ScalarboardSpeed | read-write | deprecated | The board speed. |
| 1.3.6.1.4.1.52.1.2.2.3.3.7 | ScalarboardRingSpeedFault | read-only | deprecated | Data speed of station mismatches configuration speed of board. Board is automatically bypassed. |
| 1.3.6.1.4.1.52.1.2.2.3.3.9 | ScalarboardFirstRingPort | read-only | deprecated | The port number of the first ring port. |
| 1.3.6.1.4.1.52.1.2.2.3.4 | NodefddiB | |||
| 1.3.6.1.4.1.52.1.2.2.4 | Noderr2port | |||
| 1.3.6.1.4.1.52.1.2.2.4.1 | NodecommonP | |||
| 1.3.6.1.4.1.52.1.2.2.4.1.1 | ScalarportIndex | read-only | mandatory | The number of this port relative to the board it is on. |
| 1.3.6.1.4.1.52.1.2.2.4.1.2 | ScalarportMediaType | read-only | mandatory | The type of the port. (eg. FOT, TPT, etc). See appendix A for values. |
| 1.3.6.1.4.1.52.1.2.2.4.1.3 | ScalarportAdminState | read-write | mandatory | The administrative status of this port. |
| 1.3.6.1.4.1.52.1.2.2.4.1.4 | ScalarportSourceAddr | read-only | optional | A source address that has been seen on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.1.6 | ScalarportActiveUsers | read-only | optional | The number of active users seen on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2 | NodeethernetP | |||
| 1.3.6.1.4.1.52.1.2.2.4.2.1 | ScalarportTopologyType | read-only | mandatory | The topological type of the port. Station referring to a port that has seen 1 or 0 addresses. Trunk referring to a port that has seen more than 1 address. |
| 1.3.6.1.4.1.52.1.2.2.4.2.2 | ScalarportLinkStatus | read-only | mandatory | The state of the link signal for this port |
| 1.3.6.1.4.1.52.1.2.2.4.2.3 | ScalarportStatus | read-only | mandatory | The hardware status of the port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.4 | ScalarportTotalPkts | read-only | mandatory | The number of packets detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.5 | ScalarportTotalErrors | read-only | mandatory | The sum of all alignment, CRC, out-of-window collisions, runt, and giant errors detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.6 | ScalarportTransmitColls | read-only | mandatory | The number of transmit collisions detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.7 | ScalarportRecColls | read-only | mandatory | The number of receive collsions detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.8 | ScalarportAligns | read-only | mandatory | The number of packets with alignment errors detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.9 | ScalarportCRCs | read-only | mandatory | The number of packets with bad CRC detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.10 | ScalarportRunts | read-only | mandatory | The number of runt frames detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.11 | ScalarportOOWColls | read-only | mandatory | The number of out-of-window collisions detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.12 | ScalarportNoResources | read-only | mandatory | The number of no resource condtions detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.13 | ScalarportRecBytes | read-only | mandatory | The number of bytes detected on the network by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.14 | ScalarportGiantFrames | read-only | mandatory | The number of longer than 1518 byte packets detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.15 | ScalarportRedundCrt | read-write | mandatory | The redundant circuit with which this port is associated. |
| 1.3.6.1.4.1.52.1.2.2.4.2.16 | ScalarportRedundType | read-write | mandatory | The type of port this port is in the redundant circuit. |
| 1.3.6.1.4.1.52.1.2.2.4.2.17 | ScalarportRedundStatus | read-write | mandatory | The current state of this port in the redundant circuit. |
| 1.3.6.1.4.1.52.1.2.2.4.2.18 | ScalarportForceTrunkType | read-write | mandatory | This variable forces a port to be a trunk port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.33 | ScalarportBroadPkts | read-only | mandatory | The sum of broadcast packets detected on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.34 | ScalarportMultPkts | read-only | mandatory | The sum of multicast packets detected on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.3 | NodetokenRingP | |||
| 1.3.6.1.4.1.52.1.2.2.4.3.1 | NodestationP | |||
| 1.3.6.1.4.1.52.1.2.2.4.3.1.1 | ScalarstationPortLinkStatus | read-only | deprecated | When station is supplying phantom current the Link Signal is active. When there is no phantom current the Link Signal is inactive. |
| 1.3.6.1.4.1.52.1.2.2.4.3.1.2 | ScalarstationPortLinkStateTime | read-write | deprecated | The amount of time (in seconds) elapsed since the station port last changed state. A write of 0 will reset the elapsed time. |
| 1.3.6.1.4.1.52.1.2.2.4.3.2 | NoderingP | |||
| 1.3.6.1.4.1.52.1.2.2.4.4 | NodefddiP | |||
| 1.3.6.1.4.1.52.1.2.2.5 | NoderepeaterTables | |||
| 1.3.6.1.4.1.52.1.5.1 | NodeproductRev1 | |||
| 1.3.6.1.4.1.52.1.5.1.1 | Nodetarget | |||
| 1.3.6.1.4.1.52.1.5.1.1.1 | ScalartargetRevision | read-only | mandatory | The revision of the target board. |
| 1.3.6.1.4.1.52.1.5.1.1.2 | ScalartargetPortAssociation | read-write | mandatory | Controls how the front panel ports are associated with the bridge or the repeater. The valid values are: Value AUI Port Fiber Port 0 Bridge Redundant 1 Redunda… |
| 1.3.6.1.4.1.52.1.6.1.1 | Nodefnb | |||
| 1.3.6.1.4.1.52.1.6.1.1.1 | ScalarfnbConnectedLeft | read-write | mandatory | The Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/A… |
| 1.3.6.1.4.1.52.1.6.1.1.2 | ScalarfnbConnectedRight | read-write | mandatory | The Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/… |
| 1.3.6.1.4.1.52.1.6.1.1.3 | ScalarfnbBoardBypassState | read-write | mandatory | Off == 1 (NOT bypassed). On == 2 (bypassed). |
| 1.3.6.1.4.1.52.1.6.1.2 | NodeaudibleAlarm | |||
| 1.3.6.1.4.1.52.1.6.1.2.1 | ScalaraudibleAlarmEnable | read-write | mandatory | Allows/disallows the audible alarm to be sounded when a situation occurs that the alarm should be sounded. |
| 1.3.6.1.4.1.52.1.6.1.2.2 | ScalaraudibleAlarmOff | read-write | mandatory | Turn off a sounding alarm. A read will tell you if the alarm is on or not. A write will stop a sounding alarm. |