REPEATER-REV4-MIB
321 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-MIB-NAMES | repeaterRev4 |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter NetworkAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4 | Noderepeaterrev4 | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1 | Noderptr | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.1 | NoderptrMgmt | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.1.1 | ScalarrptrMgmtName | read-write | mandatory | The ASCII name assigned to this network. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.1.2 | ScalarrptrMgmtPortCount | read-only | mandatory | Total number of ports residing on this lan segment. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.1.3 | ScalarrptrMgmtPortsEnable | read-write | mandatory | Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. Whe… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.1.4 | ScalarrptrMgmtPortsOn | read-only | mandatory | Get the total number of ON ports in this network. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.1.5 | ScalarrptrMgmtPortsOper | read-only | mandatory | Get the number of operational ports in this network. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.1.6 | ScalarrptrMgmtBoardMap | read-only | mandatory | Get a map of the chassis slots occupied by the boards in this network. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.1.7 | ScalarrptrMgmtInterfaceNum | read-only | mandatory | Get the MIBII interface number of this network. A return of zero will mean this network is not associated with a MIBII interface. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.1.8 | ScalarrptrMgmtResetCounters | read-write | mandatory | Setting this OID to 2 will reset the 'rptrPktStats', 'rptrProtocols' and 'rptrFrameSizes' RREV-4 branch static counters. Reading this OID will always return a … |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2 | NoderptrStats | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1 | NoderptrPktStats | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.1 | ScalarrptrPktStatsPackets | read-only | mandatory | Get this repeater's total received packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.2 | ScalarrptrPktStatsBytes | read-only | mandatory | Get this repeater's total received bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.3 | ScalarrptrPktStatsColls | read-only | mandatory | Get this repeater's total collisions. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.4 | ScalarrptrPktStatsErrors | read-only | mandatory | Get this repeater's total errors. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.5 | ScalarrptrPktStatsAlign | read-only | mandatory | Get this repeater's total frame alignment errors. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.6 | ScalarrptrPktStatsCRC | read-only | mandatory | Get this repeater's total CRC errors. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.7 | ScalarrptrPktStatsOOW | read-only | mandatory | Get this repeater's total out-of-window collisions. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.8 | ScalarrptrPktStatsNoRsc | read-only | mandatory | This counter is the number of packets on this network that the hardware has processed that the management has either not seen yet, in the case of an active net… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.9 | ScalarrptrPktStatsBroadcasts | read-only | mandatory | This counter is the number of broadcast packets on this network that the hardware has processed. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.1.10 | ScalarrptrPktStatsMulticasts | read-only | mandatory | This counter is the number of multicast packets on this network that the hardware has processed. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2 | NoderptrProtocols | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.1 | ScalarrptrProtocolsOSI | read-only | mandatory | Get this repeater's total received OSI packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.2 | ScalarrptrProtocolsNovell | read-only | mandatory | Get this repeater's total received Novell packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.3 | ScalarrptrProtocolsBanyan | read-only | mandatory | Get this repeater's total received Banyan packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.4 | ScalarrptrProtocolsDECNet | read-only | mandatory | Get this repeater's total received DECNet packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.5 | ScalarrptrProtocolsXNS | read-only | mandatory | Get this repeater's total received XNS packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.6 | ScalarrptrProtocolsIP | read-only | mandatory | Get this repeater's total received TCP/IP packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.7 | ScalarrptrProtocolsCtron | read-only | mandatory | Get this repeater's total received CTRON Management packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.8 | ScalarrptrProtocolsAppletalk | read-only | mandatory | Get this repeater's total received Appletalk packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.2.9 | ScalarrptrProtocolsOther | read-only | mandatory | Get this repeater's total received unknown protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3 | NoderptrFrameSizes | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.1 | ScalarrptrFrameSzRunt | read-only | mandatory | Get this repeater's total received packets of size less than 64 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.2 | ScalarrptrFrameSz64To127 | read-only | mandatory | Get this repeater's total received packets of size between 64 and 127 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.3 | ScalarrptrFrameSz128To255 | read-only | mandatory | Get this repeater's total received packets of size between 128 and 255 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.4 | ScalarrptrFrameSz256To511 | read-only | mandatory | Get this repeater's total received packets of size between 256 and 511 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.5 | ScalarrptrFrameSz512To1023 | read-only | mandatory | Get this repeater's total received packets of size between 512 and 1023 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.6 | ScalarrptrFrameSz1024To1518 | read-only | mandatory | Get this repeater's total received packets of size between 1024 and 1518 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.2.3.7 | ScalarrptrFrameSzGiant | read-only | mandatory | Get this repeater's total received packets of size greater than 1518 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3 | NoderptrAlarms | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.1 | ScalarrptrAlarmsTrafEnable | read-write | mandatory | Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.2 | ScalarrptrAlarmsTrafThreshold | read-write | mandatory | The maximum number of packets that will be allowed before an alarm is generated. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.3 | ScalarrptrAlarmsCollEnable | read-write | mandatory | Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.4 | ScalarrptrAlarmsCollThreshold | read-write | mandatory | The collision threshold is the maximum number of collisions within the time base that will be allowed before an alarm is generated. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.5 | ScalarrptrAlarmsErrEnable | read-write | mandatory | Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6 | ScalarrptrAlarmsErrThreshold | read-write | mandatory | The percentage of errors per good packet within the timebase that will cause an alarm. The units of this value is in seconds. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.7 | ScalarrptrAlarmsErrSource | read-write | mandatory | Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 a… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.8 | ScalarrptrAlarmsAlarmTimebase | read-write | mandatory | The alarm timebase, in seconds. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.9 | ScalarrptrAlarmsBroadEnable | read-write | mandatory | Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.3.10 | ScalarrptrAlarmsBroadThreshold | read-write | mandatory | The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4 | NoderptrRedundancy | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1 | NoderptrRedund | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.1 | ScalarrptrRedundReset | read-write | mandatory | If this object is set to Reset it will cause a reset of the redundancy object to occur. Setting this object to NoReset will do nothing. This object will always… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.2 | ScalarrptrRedundPollInterval | read-write | mandatory | Get/Set the number of seconds between polls for redundancy. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.3 | ScalarrptrRedundTestTOD | read-write | mandatory | Get/Set the time of day at which the redundant circuits will be tested. The format of the time string is hh:mm:ss. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.4 | ScalarrptrRedundPerformTest | read-write | mandatory | If this object is set to Test it will cause a test of the redundant circuits to be performed. Setting this object to NoTest will have no effect. When read this… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.1.5 | ScalarrptrRedundMaxCrcts | read-only | mandatory | Returns the maximum number of circuits which may exist on this network. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2 | TablerptrRedundCrctTable | not-accessible | mandatory | A list of redundant circuit objects for this repeater. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1 | RowrptrRedundCrctEntry | not-accessible | mandatory | A list of objects for a particular redundant circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.1 | ColumnrptrRedundCrctId | read-only | mandatory | Returns the index for a member circuit in the table of redundant circuits. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.2 | ColumnrptrRedundCrctName | read-write | mandatory | Get/Set the name of the indicated circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.3 | ColumnrptrRedundCrctRetrys | read-write | mandatory | Get/Set the the number of unanswered polls allowed for the circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.4 | ColumnrptrRedundCrctNumBPs | read-only | mandatory | Get the number of board/port combinations associated with the circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.5 | ColumnrptrRedundCrctNumAddr | read-only | mandatory | Get the number of IP Addresses associated with the circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.6 | ColumnrptrRedundCrctAddAddr | read-write | mandatory | Add an IP Address to the polling list for the indicated circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.7 | ColumnrptrRedundCrctDelAddr | read-write | mandatory | Delete an IP Address from the polling list of the indicated circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.8 | ColumnrptrRedundCrctEnable | read-write | mandatory | If this object is set to Enable, the circuit is enabled. If this object is set to Disable, the circuit is disbabled. When read, this object returns the state o… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9 | ColumnrptrRedundCrctReset | read-write | mandatory | If this object is set to Reset, the circuit is reset. All of the circuit's associated boards and ports are returned to NOT_USED, any associated IP Addresses ar… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3 | TablerptrRedundPortTable | not-accessible | mandatory | A list of redundant port objects for this repeater. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1 | RowrptrRedundPortEntry | not-accessible | mandatory | A redundant port entry containing objects pertaining to a particular redundant port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.1 | ColumnrptrRedundPortId | read-only | mandatory | A unique value identifying an element in a sequence of member ports which belong to a circuit in the table of redundant circuits. This value is not a port numb… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.2 | ColumnrptrRedundPortCrctId | read-only | mandatory | A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.3 | ColumnrptrRedundPortNum | read-only | mandatory | Returns the port number of a member port belonging to a redundant circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.4 | ColumnrptrRedundPortBoardNum | read-only | mandatory | Returns the board number of a member port belonging to a redundant circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.5 | ColumnrptrRedundPortType | read-only | mandatory | Return the state of a port associated with the indicated circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4 | TablerptrRedundAddrTable | not-accessible | mandatory | A list of redundant IP Address objects which belong to a circuit for this repeater. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1 | RowrptrRedundAddrEntry | not-accessible | mandatory | A entry containing objects pertaining to a particular redundant IP Address which belongs to a circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.1 | ColumnrptrRedundAddrId | read-only | mandatory | A unique value identifying an element in a sequence of member IP Addresses which belong to a circuit in the table of redundant circuits. This value goes from 1… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.2 | ColumnrptrRedundAddrCrctId | read-only | mandatory | A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.3 | ColumnrptrRedundAddrIPAddr | read-only | mandatory | Returns an IP Address associated with the indicated circuit. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5 | NoderptrSourceAddress | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1 | TablerptrSrcAddrListTable | not-accessible | mandatory | This table defines the source address list that is defined at the repeater level. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1 | RowrptrSrcAddrListEntry | not-accessible | mandatory | Defines a specific source address object. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.1 | ColumnrptrSrcAddrListId | read-only | mandatory | Returns an index into a table of source address seen by this repeater. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.2 | ColumnrptrSrcAddrAddressList | read-only | mandatory | Returns a source address seen by this repeater. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2 | TablerptrSrcAddrSrcTable | not-accessible | mandatory | This table defines the list of all source addresses that have been seen. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1 | RowrptrSrcAddrSrcTableEntry | not-accessible | mandatory | Describes a particular source address source entry. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.1 | ColumnrptrSrcAddrSrcTableEntryId | read-only | mandatory | Returns the source address to which this table's information pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.2 | ColumnrptrSrcAddrSrcTableEntryPort | read-only | mandatory | Returns the port# of the port that sourced the source address. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.3 | ColumnrptrSrcAddrSrcTableEntryPortGroup | read-only | mandatory | Returns the port group# of the port that sourced the source address. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3 | NoderptrSrcAddrMgmt | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.1 | ScalarrptrSrcAddrMgmtSrcAgeInterval | read-write | mandatory | Get/Set source addressing ageing interval. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.2 | ScalarrptrSrcAddrMgmtPortLock | read-write | mandatory | Setting this object to Lock will activate the network port security lock. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects th… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.3 | ScalarrptrSrcAddrMgmtActiveUsers | read-only | mandatory | Get the number of active users on this network. |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.5.3.4 | ScalarrptrSrcAddrMgmtHashType | read-write | mandatory | Defines the type of hashing that will be used for source address management. In a DEC-NET environment or a combination fo DEC-NET and non DEC-NET users where s… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.6 | NoderptrTrap | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1 | NoderptrHwTrapSet | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.1 | ScalarrptrHwTrapSetLink | read-write | mandatory | Enables and disables link traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetLink to a value of d… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2 | ScalarrptrHwTrapSetSeg | read-write | mandatory | Enables and disables segmentation traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetSeg to a val… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.6.2 | NoderptrSaTrapSet | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.6.2.1 | ScalarrptrSaTrapSetSrcaddr | read-write | mandatory | Enables and disables source address traps for this network. Setting a value of disable(1) is equivalent to setting all instances of rptrPortSaTrapSetSrcaddr to… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.7 | NoderptrSaSecurity | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.1.7.1 | ScalarrptrSecurityLockState | read-write | mandatory | Setting this object to Lock will activate the network port security lock. Setting a value of portMisMatch(3) is invalid. A value of portMisMatch(3) reflects th… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.7.2 | ScalarrptrSecuritySecureState | read-only | mandatory | The status of source address security of the network. Ports on the network that are secure(1), can be locked in order to enable security. nonSecure(2) ports ca… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.7.3 | ScalarrptrSecurityLearnState | read-write | mandatory | The learn state of the network. This object will only be applied to ports that are unlocked. If set to learn(1), all addresses are deleted on the ports and lea… |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.7.4 | ScalarrptrSecurityLearnMode | read-write | mandatory | Get/Set the learn mode of the network. If set to onetime learn mode oneTime(1), each port is capable of learning two addresses and securing on both destination… |
| 1.3.6.1.4.1.52.4.1.1.1.4.2 | NoderptrPortGroup | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.2.1 | TablerptrPortGrpMgmtTable | not-accessible | mandatory | A list of port management objects for this repeater node. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1 | RowrptrPortGrpMgmtEntry | not-accessible | mandatory | An entry containing objects pertaining to port management for a port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.1 | ColumnrptrPortGrpMgmtGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.2 | ColumnrptrPortGrpMgmtName | read-write | mandatory | Gets/Sets a name for the specified port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.3 | ColumnrptrPortGrpMgmtPortCount | read-only | mandatory | Get total number of ports contained on the board. Notice that this is the physical port count. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.4 | ColumnrptrPortGrpMgmtPortsEnable | read-write | mandatory | Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. Whe… |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.5 | ColumnrptrPortGrpMgmtPortsOn | read-only | mandatory | Get total number of ON ports in this port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.6 | ColumnrptrPortGrpMgmtPortsOper | read-only | mandatory | Get total number of operational ports in the port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.7 | ColumnrptrPortGrpMgmtLogPortCount | read-only | mandatory | Get total number of ports contained in this port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2 | NoderptrPortGrpStats | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1 | TablerptrPortGrpPktStatsTbl | not-accessible | mandatory | This table provides packet statistics for port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1 | RowrptrPortGrpPktStatsEntry | not-accessible | mandatory | Defines a specific packet statistics entry. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.1 | ColumnrptrPortGrpPktStatsId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.2 | ColumnrptrPortGrpPktStatsPkts | read-only | mandatory | Return this port group's total received packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.3 | ColumnrptrPortGrpPktStatsBytes | read-only | mandatory | Return this port group's total received bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.4 | ColumnrptrPortGrpPktStatsColls | read-only | mandatory | Return this port group's total collisions. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.5 | ColumnrptrPortGrpPktStatsErrors | read-only | mandatory | Return this port group's total errors. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.6 | ColumnrptrPortGrpPktStatsAlign | read-only | mandatory | Return this port group's total frame alignment errors. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.7 | ColumnrptrPortGrpPktStatsCRC | read-only | mandatory | Return this port group's total CRC errors. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.8 | ColumnrptrPortGrpPktStatsOOW | read-only | mandatory | Return this port group's total out-of-window collisions. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.9 | ColumnrptrPortGrpPktStatsBroadcasts | read-only | mandatory | Return this port group's total received broadcast packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.10 | ColumnrptrPortGrpPktStatsMulticasts | read-only | mandatory | Return this port group's total received multicast packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2 | TablerptrPortGrpProtocolTbl | not-accessible | mandatory | Provides port group protocol statistics. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1 | RowrptrPortGrpProtocolEntry | not-accessible | mandatory | Defines a specific port group protocol statistics entry. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.1 | ColumnrptrPortGrpProtocolId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.2 | ColumnrptrPortGrpProtocolOSI | read-only | mandatory | Return this port group's total received OSI packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.3 | ColumnrptrPortGrpProtocolNovell | read-only | mandatory | Return this port group's total received Novell packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.4 | ColumnrptrPortGrpProtocolBanyan | read-only | mandatory | Return this port group's total received Banyan packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.5 | ColumnrptrPortGrpProtocolDECNet | read-only | mandatory | Return this port group's total received DECNet packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.6 | ColumnrptrPortGrpProtocolXNS | read-only | mandatory | Return this port group's total received XNS packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.7 | ColumnrptrPortGrpProtocolIP | read-only | mandatory | Return this port group's total received TCP/IP packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.8 | ColumnrptrPortGrpProtocolCtron | read-only | mandatory | Return this port group's total received CTRON Management packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.9 | ColumnrptrPortGrpProtocolAppletalk | read-only | mandatory | Return this port group's total received Appletalk packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.10 | ColumnrptrPortGrpProtocolOther | read-only | mandatory | Return this port group's total received unknown protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3 | TablerptrPortGrpFrameSzTbl | not-accessible | mandatory | Defines frame sizes as seen by this port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1 | RowrptrPortGrpFrameSzEntry | not-accessible | mandatory | Defines a particular frame size entry. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.1 | ColumnrptrPortGrpFrameSzId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.2 | ColumnrptrPortGrpFrameSzRunt | read-only | mandatory | Return this port group's total received packets of size less than 64 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.3 | ColumnrptrPortGrpFrameSz64To127 | read-only | mandatory | Return this port group's total received packets of size between 64 and 127 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.4 | ColumnrptrPortGrpFrameSz128To255 | read-only | mandatory | Return this port group's total received packets of size between 128 and 255 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.5 | ColumnrptrPortGrpFrameSz256To511 | read-only | mandatory | Return this port group's total received packets of size between 256 and 511 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.6 | ColumnrptrPortGrpFrameSz512To1023 | read-only | mandatory | Return this port group's total received packets of size between 512 and 1023 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.7 | ColumnrptrPortGrpFrameSz1024To1518 | read-only | mandatory | Return this port group's total received packets of size between 1024 and 1518 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.8 | ColumnrptrPortGrpFrameSzGiant | read-only | mandatory | Return this port group's total received packets of size greater than 1518 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3 | TablerptrPortGrpAlarmTable | not-accessible | mandatory | A list of port group alarm objects for this repeater node. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1 | RowrptrPortGrpAlarmEntry | not-accessible | mandatory | An entry containing objects pertaining to port group alarms for a port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.1 | ColumnrptrPortGrpAlarmId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.2 | ColumnrptrPortGrpAlarmTrafEnable | read-write | mandatory | Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3 | ColumnrptrPortGrpAlarmTrafThreshold | read-write | mandatory | The maximum number of packets that will be allowed before an alarm is generated. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.4 | ColumnrptrPortGrpAlarmTrafGrpDisable | read-write | mandatory | Set will permit a port group to be disabled on a traffic alarm condition. Get will show whether the port group disabling is allowed or not. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.5 | ColumnrptrPortGrpAlarmCollEnable | read-write | mandatory | Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.6 | ColumnrptrPortGrpAlarmCollThreshold | read-write | mandatory | The collision threshold is the maximum number of collisions within the time base that will be allowed before an alaram is generated. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.7 | ColumnrptrPortGrpAlarmCollBdDisable | read-write | mandatory | Set will permit a port group to be disabled on a collision alarm condition. Get will show whether the port group disabling is allowed or not. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.8 | ColumnrptrPortGrpAlarmErrEnable | read-write | mandatory | Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.9 | ColumnrptrPortGrpAlarmErrThreshold | read-write | mandatory | Get/Set the percentage of errors per good packet within the timebase that will cause an alarm. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.10 | ColumnrptrPortGrpAlarmErrSource | read-write | mandatory | Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 a… |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.11 | ColumnrptrPortGrpAlarmErrGrpDisable | read-write | mandatory | Set will permit a port group to be disabled on an error alarm condition. Get will show whether the port group disabling is allowed or not. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.12 | ColumnrptrPortGrpAlarmBroadEnable | read-write | mandatory | Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.13 | ColumnrptrPortGrpAlarmBroadThreshold | read-write | mandatory | The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.14 | ColumnrptrPortGrpAlarmBroadGrpDisable | read-write | mandatory | Set will permit a port group to be disabled on a broadcast alarm condition. Get will show whether the port group disabling is allowed or not. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.4 | TablerptrPortGrpSrcAddrTable | not-accessible | mandatory | This table provides a list of the number of active users that have been seen by port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1 | RowrptrPortGrpSrcAddrEntry | not-accessible | mandatory | Defines a specific active user entry. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.1 | ColumnrptrPortGrpSrcAddrId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.2 | ColumnrptrPortGrpSrcAddrActiveUsers | read-only | mandatory | Returns the total number of active users seen by this port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5 | NoderptrPortGrpTrap | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1 | NoderptrPortGrpHwTrapSet | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1 | TablerptrPortGrpHwTrapTable | not-accessible | mandatory | A list of trap enable/disable at the port group level. Disable here is equivalent to disable for each port in the port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1 | RowrptrPortGrpHwTrapEntry | not-accessible | mandatory | Individual trap entries for port group enable/disable. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.1 | ColumnrptrPortGrpHwTrapSetGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.2 | ColumnrptrPortGrpHwTrapSetLink | read-write | mandatory | Enables and disables link traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSetLink to … |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.3 | ColumnrptrPortGrpHwTrapSetSeg | read-write | mandatory | Enables and disables segmentation traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rptrPortHwTrapSet… |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2 | NoderptrPortGrpSaTrapSet | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1 | TablerptrPortGrpSaTrapTable | not-accessible | mandatory | A list of trap enable/disable at the port group level. Disable here is equivalent to disable for each port in the port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1 | RowrptrPortGrpSaTrapEntry | not-accessible | mandatory | Individual trap entries for port group enable/disable. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.1 | ColumnrptrPortGrpSaTrapSetGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.2 | ColumnrptrPortGrpSaTrapSetSrcaddr | read-write | mandatory | Enables and disables source address traps for the specified port group. Setting a value of disable(1) is equivalent to setting all instances of rtprPortSaTrapS… |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.6 | TablerptrPortGrpSrcAddrLockTable | not-accessible | mandatory | This table defines the status of the port group source address security locks. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1 | RowrptrPortGrpSrcAddrLockEntry | not-accessible | mandatory | DeDefines a status of a particular port group security lock. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.1 | ColumnrptrPortGrpSrcAddrLockGrpId | read-only | mandatory | Defines a particular port group for which this source address security lock information pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.2 | ColumnrptrPortGrpSrcAddrLock | read-write | mandatory | Allows setting of the security lock status for this port group. unlock(1) - Unlocks the source address lock this group, lock(2) - Locks the source address for … |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.3 | ColumnrptrPortGrpSASecuritySecureState | read-only | mandatory | The state of the source addressing security for this port group. Ports on the port group that are secure(1), can be locked in order to enable security. When a … |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4 | ColumnrptrPortGrpSASecurityLearnState | read-write | mandatory | The learn state of source addressing security for this port group. This object will only be applied to ports that are unlocked. If set to learn(1), all address… |
| 1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.5 | ColumnrptrPortGrpSASecurityLearnMode | read-write | mandatory | The learn mode of source addressing security port group. If set to oneTime(1), each port is capable of learning two addresses and securing on both destination … |
| 1.3.6.1.4.1.52.4.1.1.1.4.3 | NoderptrPort | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.3.1 | TablerptrPortMgmtTable | not-accessible | mandatory | A list of port management objects for this repeater node. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1 | RowrptrPortMgmtEntry | not-accessible | mandatory | An entry containing objects pertaining to port management for a port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.1 | ColumnrptrPortMgmtPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.2 | ColumnrptrPortMgmtPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.3 | ColumnrptrPortMgmtName | read-write | mandatory | Sets/Gets an ASCII name assigned to this port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4 | ColumnrptrPortMgmtAdminState | read-write | mandatory | Setting this object to Enable will cause port to be enabled. Setting this object to Disable will cause the port to be disabled. When read this object will retu… |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.5 | ColumnrptrPortMgmtOperState | read-only | mandatory | Get port operational status. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.6 | ColumnrptrPortMgmtPortType | read-only | mandatory | Uniquely defines the repeater port type. A authoritative identification for a port type. By convention, this value is allocated within the SMI enterprises subt… |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2 | NoderptrPortStats | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1 | TablerptrPortPktStatsTbl | not-accessible | mandatory | Provides repeater port packet statistics. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1 | RowrptrPortPktStatsEntry | not-accessible | mandatory | Provides basic statistics for a specific port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.1 | ColumnrptrPortPktStatsPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.2 | ColumnrptrPortPktStatsPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.3 | ColumnrptrPortPktStatsPackets | read-only | mandatory | Get this port's total received packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.4 | ColumnrptrPortPktStatsBytes | read-only | mandatory | Get this port's total received bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.5 | ColumnrptrPortPktStatsColls | read-only | mandatory | Get this port's total collisions. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.6 | ColumnrptrPortPktStatsErrors | read-only | mandatory | Get this port's total errors. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.7 | ColumnrptrPortPktStatsAlign | read-only | mandatory | Get this port's total frame alignment errors. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.8 | ColumnrptrPortPktStatsCRC | read-only | mandatory | Get this port's total CRC errors. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.9 | ColumnrptrPortPktStatsOOW | read-only | mandatory | Get this port's total out-of-window collisions. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.10 | ColumnrptrPortPktStatsBroadcasts | read-only | mandatory | Get this port's total received broadcast packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.11 | ColumnrptrPortPktStatsMulticasts | read-only | mandatory | Get this port's total received multicast packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2 | TablerptrPortProtocolTbl | not-accessible | mandatory | Provides statistics about the protocols seen by the different ports. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1 | RowrptrPortProtocolEntry | not-accessible | mandatory | An entry containing objects pertaining to statistics about protocols seen by different ports. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.1 | ColumnrptrPortProtocolPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.2 | ColumnrptrPortProtocolPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.3 | ColumnrptrPortProtocolOSI | read-only | mandatory | Get this port's total received OSI protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.4 | ColumnrptrPortProtocolNovell | read-only | mandatory | Get this port's total received Novell protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.5 | ColumnrptrPortProtocolBanyan | read-only | mandatory | Get this port's total received Banyan protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.6 | ColumnrptrPortProtocolDECNet | read-only | mandatory | Get this port's total received DECNet protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.7 | ColumnrptrPortProtocolXNS | read-only | mandatory | Get this port's total received XNS protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.8 | ColumnrptrPortProtocolIP | read-only | mandatory | Get this port's total received TCP/IP protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.9 | ColumnrptrPortProtocolCtron | read-only | mandatory | Get this port's total received CTRON Management protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.10 | ColumnrptrPortProtocolAppletalk | read-only | mandatory | Get this port's total received Appletalk protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.11 | ColumnrptrPortProtocolOther | read-only | mandatory | Get this port's total received unknown protocol packets. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3 | TablerptrPortFrameSzTbl | not-accessible | mandatory | Provides repeater port frame size statistics. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1 | RowrptrPortFrameSzEntry | not-accessible | mandatory | Describes a set of frame size statistics for a specific port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.1 | ColumnrptrPortFrameSzPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.2 | ColumnrptrPortFrameSzPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.3 | ColumnrptrPortFrameSzRunt | read-only | mandatory | Get this port's total received packets of size less than 64 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.4 | ColumnrptrPortFrameSz64To127 | read-only | mandatory | Get this port's total received packets of size between 64 and 127 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.5 | ColumnrptrPortFrameSz128To255 | read-only | mandatory | Get this port's total received packets of size between 128 and 255 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.6 | ColumnrptrPortFrameSz256To511 | read-only | mandatory | Get this port's total received packets of size between 256 and 511 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.7 | ColumnrptrPortFrameSz512To1023 | read-only | mandatory | Get this port's total received packets of size between 512 and 1023 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.8 | ColumnrptrPortFrameSz1024To1518 | read-only | mandatory | Get this port's total received packets of size between 1024 and 1518 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.9 | ColumnrptrPortFrameSzGiant | read-only | mandatory | Get this port's total received packets of size greater than 1518 bytes. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3 | TablerptrPortAlarmTable | not-accessible | mandatory | A list of port alarm objects for this repeater node. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1 | RowrptrPortAlarmEntry | not-accessible | mandatory | An entry containing objects pertaining to port alarm objects for a port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.1 | ColumnrptrPortAlarmPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.2 | ColumnrptrPortAlarmPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3 | ColumnrptrPortAlarmTrafEnable | read-write | mandatory | Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.4 | ColumnrptrPortAlarmTrafThreshold | read-write | mandatory | The maximum number of packets that will be allowed before an alarm is generated. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.5 | ColumnrptrPortAlarmTrafPortDisable | read-write | mandatory | Set will permit a port to be disabled on a traffic alarm condition. Get will show whether the port disabling is allowed or not. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.6 | ColumnrptrPortAlarmCollEnable | read-write | mandatory | Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7 | ColumnrptrPortAlarmCollThreshold | read-write | mandatory | The collision threshold is the maximum number of collisions within the time base that will be allowed before an alaram is generated. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8 | ColumnrptrPortAlarmCollPortDisable | read-write | mandatory | Set will permit a port to be disabled on a collision alarm condition. Get will show whether the port disabling is allowed or not. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.9 | ColumnrptrPortAlarmErrEnable | read-write | mandatory | Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 | ColumnrptrPortAlarmErrThreshold | read-write | mandatory | Get/Set the percentage of errors per good packet within the timebase that will cause an alarm. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11 | ColumnrptrPortAlarmErrSource | read-write | mandatory | Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 a… |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.12 | ColumnrptrPortAlarmErrPortDisable | read-write | mandatory | Set will permit a port to be disabled on an error alarm condition. Get will show whether the port disabling is allowed or not. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.13 | ColumnrptrPortAlarmBroadEnable | read-write | mandatory | Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.14 | ColumnrptrPortAlarmBroadThreshold | read-write | mandatory | The broadcase threshold represents the maximum number of broadcasts that are allowed during the time base before an alarm is generated. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.15 | ColumnrptrPortAlarmBroadPortDisable | read-write | mandatory | Set will permit a port to be disabled on a broadcast alarm condition. Get will show whether the port disabling is allowed or not. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.4 | TablerptrPortRedundTable | not-accessible | mandatory | A list of port redundancy objects for this repeater node. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1 | RowrptrPortRedundEntry | not-accessible | mandatory | An entry containing objects pertaining to port redundancy for a port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.1 | ColumnrptrPortRedundPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.2 | ColumnrptrPortRedundPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.3 | ColumnrptrPortRedundCrctNum | read-write | mandatory | Get/Set redundant circuit number of redundant circuit that port is or is to be associated with. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.4 | ColumnrptrPortRedundType | read-write | mandatory | Get/Set redundant port type. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.5 | ColumnrptrPortRedundStatus | read-write | mandatory | Get/Set redundant port status. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.5 | TablerptrPortSrcAddrTable | not-accessible | mandatory | A list of port source address objects for this repeater node. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1 | RowrptrPortSrcAddrEntry | not-accessible | mandatory | An entry containing objects pertaining to port source address objects for a port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.1 | ColumnrptrPortSrcAddrPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.2 | ColumnrptrPortSrcAddrPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.3 | ColumnrptrPortSrcAddrTopoState | read-only | mandatory | Returns the topological state of the port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4 | ColumnrptrPortSrcAddrForceTrunk | read-write | mandatory | When this object is set to Force it causes the port to be placed into a Trunk topological state whether the network traffic would warrant such a state or not. … |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.5 | ColumnrptrPortSrcAddrActiveUsers | read-only | mandatory | Returns the total number of active users seen by this port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.6 | TablerptrPortSrcAddrListTable | not-accessible | mandatory | This table provides information about the source addresses that have been seen by the differnt ports. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1 | RowrptrPortSrcAddrListEntry | not-accessible | mandatory | A specific source address that has been seen |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.1 | ColumnrptrPortSrcAddrListId | read-only | mandatory | Returns an index associated with the number of address to be returned. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.2 | ColumnrptrPortSrcAddrListPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.3 | ColumnrptrPortSrcAddrListPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.4 | ColumnrptrPortSrcAddrAddressList | read-only | mandatory | Returns a source address seen on this port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.7 | TablerptrPortHardwareTable | not-accessible | mandatory | A list of port hardware objects for this repeater port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1 | RowrptrPortHardwareEntry | not-accessible | mandatory | An entry containing objects pertaining to port hardware for a hardware port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.1 | ColumnrptrPortHardwarePortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.2 | ColumnrptrPortHardwarePortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.3 | ColumnrptrPortHardwareSegStatus | read-only | mandatory | Returns port segmentation status. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.4 | ColumnrptrPortHardwareLinkStatus | read-only | mandatory | Returns port link status. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8 | NoderptrPortTrap | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1 | NoderptrPortHwTrapSet | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1 | TablerptrPortHwTrapTable | not-accessible | mandatory | A list of trap enable/disable at the port level. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1 | RowrptrPortHwTrapEntry | not-accessible | mandatory | Individual trap entries for port group enable/disable. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.1 | ColumnrptrPortHwTrapSetPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.2 | ColumnrptrPortHwTrapSetPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.3 | ColumnrptrPortHwTrapSetLink | read-write | mandatory | Enables and disables link traps for this port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.4 | ColumnrptrPortHwTrapSetSeg | read-write | mandatory | Enables and disables segmentation traps for this port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2 | NoderptrPortSaTrapSet | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1 | TablerptrPortSaTrapTable | not-accessible | mandatory | A list of trap enable/disable at the port level |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1 | RowrptrPortSaTrapEntry | not-accessible | mandatory | Individual trap entries for port group enable/disable. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.1 | ColumnrptrPortSaTrapSetPortId | read-only | mandatory | Returns an index to a port for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.2 | ColumnrptrPortSaTrapSetPortGrpId | read-only | mandatory | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.3 | ColumnrptrPortSaTrapSetSrcaddr | read-write | mandatory | Enables and disables source address traps for this port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9 | NoderptrPortSecurity | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1 | TablerptrPortSecurityTable | not-accessible | mandatory | This table defines status of the source lock security. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1 | RowrptrPortSecurityEntry | not-accessible | mandatory | Defines lock status for this particular entry. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.1 | ColumnrptrPortSecurityPortGrpId | read-only | mandatory | The port Group ID for which this source address lock entry pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.2 | ColumnrptrPortSecurityPortId | read-only | mandatory | The port ID for which this source address lock entry pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.3 | ColumnrptrPortSecurityLockStatus | read-write | mandatory | Defines the lock status for this particular port entry. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4 | ColumnrptrPortSecurityLockAddAddress | read-write | mandatory | Setting a value to this object will cause a new entry to be added to the rptrPortSecurityListTable. When read this object will display an OCTET STRING of SIZE … |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.5 | ColumnrptrPortSecurityLockDelAddress | read-write | mandatory | Setting a value to this object will cause corresponding entry in the rptrPortSecurityListTable to be deleted. When read this object returns an OCTET STRING of … |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.6 | ColumnrptrPortSecurityDisableOnViolation | read-write | mandatory | Designates whether port is disabled if its source address is violated. A source address violation occurs when a address is detected which is not in the source … |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.7 | ColumnrptrPortSecurityFullSecEnabled | read-write | mandatory | A port that is set to full security and is locked will scramble ALL packets, which are not contained in the expected address list, including broadcasts and mul… |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.8 | ColumnrptrPortSecuritySecureState | read-only | mandatory | The secure state of the port. If the port is secure(1), it can be locked in order to enable security. A nonSecure(2) port cannot be locked. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.9 | ColumnrptrPortSecurityForceNonSecure | read-write | mandatory | The force non-secure state of port. If the port is Forced, Non-Secure via a value of forceNonSecure(2), it is put into a Non-Secure state, in which case it can… |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.10 | ColumnrptrPortSecurityLearnState | read-write | mandatory | The learn state of the port. This object will only be applied to a port that is unlocked. If set to learn(1), all addresses are deleted on the port and learnin… |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.11 | ColumnrptrPortSecurityLearnMode | read-write | mandatory | The learn mode of the port. If set to oneTime(1), the port is capable of learning two addresses and securing on both destination and source addresses (upon loc… |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2 | TablerptrPortSecurityListTable | not-accessible | mandatory | This table defines a list of all source address locks maintained for the specified port. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1 | RowrptrPortSecurityListEntry | not-accessible | mandatory | An entry containing objects pertaining to source address locks for a port group. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.1 | ColumnrptrPortSecurityListPortGrpId | read-only | mandatory | The port group for which this security list entry pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.2 | ColumnrptrPortSecurityListPortId | read-only | mandatory | The port ID for which this source address lock list pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.3 | ColumnrptrPortSecurityListIndex | read-only | mandatory | A unique index for the source address entries. |
| 1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.4 | ColumnrptrPortSecurityListAddress | read-only | mandatory | Defines the particular source address that has been locked. |
| 1.3.6.1.4.1.52.4.1.1.1.4.4 | NoderptrPortAssoc | |||
| 1.3.6.1.4.1.52.4.1.1.1.4.4.1 | TablerptrPortAssocTable | not-accessible | mandatory | This table defines the port association for those switching MIMs that support this functionality. |
| 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1 | RowrptrPortAssocEntry | not-accessible | mandatory | Describes a particular port association entry. |
| 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.1 | ColumnrptrPortAssocBoard | read-only | mandatory | The board number for which this port association information pertains. |
| 1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.2 | ColumnrptrPortAssocStatus | read-write | mandatory | This object describes the status of the user selectable port. On a TPXMIM34 this is port 13 which may either be an EPIM or default configuration. A value of de… |