RFC1253-MIB
118 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.14 | Nodeospf | |||
| 1.3.6.1.2.1.14.1 | NodeospfGeneralGroup | |||
| 1.3.6.1.2.1.14.1.1 | ScalarospfRouterId | read-write | mandatory | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the … |
| 1.3.6.1.2.1.14.1.2 | ScalarospfAdminStat | read-write | mandatory | The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it … |
| 1.3.6.1.2.1.14.1.3 | ScalarospfVersionNumber | read-only | mandatory | The current version number of the OSPF protocol is 2. |
| 1.3.6.1.2.1.14.1.4 | ScalarospfAreaBdrRtrStatus | read-only | mandatory | A flag to note whether this router is an area border router. |
| 1.3.6.1.2.1.14.1.5 | ScalarospfASBdrRtrStatus | read-write | mandatory | A flag to note whether this router is an Autonomous System border router. |
| 1.3.6.1.2.1.14.1.6 | ScalarospfExternLSACount | read-only | mandatory | The number of external (LS type 5) link-state advertisements in the link-state database. |
| 1.3.6.1.2.1.14.1.7 | ScalarospfExternLSACksumSum | read-only | mandatory | The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine i… |
| 1.3.6.1.2.1.14.1.8 | ScalarospfTOSSupport | read-write | mandatory | The router's support for type-of-service routing. |
| 1.3.6.1.2.1.14.1.9 | ScalarospfOriginateNewLSAs | read-only | mandatory | The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. |
| 1.3.6.1.2.1.14.1.10 | ScalarospfRxNewLSAs | read-only | mandatory | The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link… |
| 1.3.6.1.2.1.14.2 | TableospfAreaTable | not-accessible | mandatory | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.2.1.14.2.1 | RowospfAreaEntry | not-accessible | mandatory | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.2.1.14.2.1.1 | ColumnospfAreaId | read-write | mandatory | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.2.1.14.2.1.2 | ColumnospfAuthType | read-write | mandatory | The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. |
| 1.3.6.1.2.1.14.2.1.3 | ColumnospfImportASExtern | read-write | mandatory | The area's support for importing AS external link- state advertisements. |
| 1.3.6.1.2.1.14.2.1.4 | ColumnospfSpfRuns | read-only | mandatory | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.2.1.14.2.1.5 | ColumnospfAreaBdrRtrCount | read-only | mandatory | The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.2.1.14.2.1.6 | ColumnospfASBdrRtrCount | read-only | mandatory | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.2.1.14.2.1.7 | ColumnospfAreaLSACount | read-only | mandatory | The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| 1.3.6.1.2.1.14.2.1.8 | ColumnospfAreaLSACksumSum | read-only | mandatory | The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) lin… |
| 1.3.6.1.2.1.14.3 | TableospfStubAreaTable | not-accessible | mandatory | The set of metrics that will be advertised by a default Area Border Router into a stub area. |
| 1.3.6.1.2.1.14.3.1 | RowospfStubAreaEntry | not-accessible | mandatory | The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. |
| 1.3.6.1.2.1.14.3.1.1 | ColumnospfStubAreaID | read-write | mandatory | The 32 bit identifier for the Stub Area. On creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.3.1.2 | ColumnospfStubTOS | read-write | mandatory | The Type of Service associated with the metric. On creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.3.1.3 | ColumnospfStubMetric | read-write | mandatory | The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas. |
| 1.3.6.1.2.1.14.3.1.4 | ColumnospfStubStatus | read-write | mandatory | This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row re… |
| 1.3.6.1.2.1.14.4 | TableospfLsdbTable | not-accessible | mandatory | The OSPF Process's Links State Database. |
| 1.3.6.1.2.1.14.4.1 | RowospfLsdbEntry | not-accessible | mandatory | A single Link State Advertisement. |
| 1.3.6.1.2.1.14.4.1.1 | ColumnospfLsdbAreaId | read-only | mandatory | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.2.1.14.4.1.2 | ColumnospfLsdbType | read-only | mandatory | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.2.1.14.4.1.3 | ColumnospfLsdbLSID | read-only | mandatory | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.2.1.14.4.1.4 | ColumnospfLsdbRouterId | read-only | mandatory | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.2.1.14.4.1.5 | ColumnospfLsdbSequence | read-only | mandatory | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.2.1.14.4.1.6 | ColumnospfLsdbAge | read-only | mandatory | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.2.1.14.4.1.7 | ColumnospfLsdbChecksum | read-only | mandatory | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.2.1.14.4.1.8 | ColumnospfLsdbAdvertisement | read-only | mandatory | The entire Link State Advertisement, including its header. |
| 1.3.6.1.2.1.14.5 | TableospfAreaRangeTable | not-accessible | mandatory | A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.2.1.14.5.1 | RowospfAreaRangeEntry | not-accessible | mandatory | A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.2.1.14.5.1.1 | ColumnospfAreaRangeAreaID | read-write | mandatory | The Area the Address Range is to be found within. |
| 1.3.6.1.2.1.14.5.1.2 | ColumnospfAreaRangeNet | read-write | mandatory | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.2.1.14.5.1.3 | ColumnospfAreaRangeMask | read-write | mandatory | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.2.1.14.5.1.4 | ColumnospfAreaRangeStatus | read-write | mandatory | This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row re… |
| 1.3.6.1.2.1.14.6 | TableospfHostTable | not-accessible | mandatory | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1.3.6.1.2.1.14.6.1 | RowospfHostEntry | not-accessible | mandatory | A metric to be advertised, for a given type of service, when a given host is reachable. |
| 1.3.6.1.2.1.14.6.1.1 | ColumnospfHostIpAddress | read-write | mandatory | The IP Address of the Host. |
| 1.3.6.1.2.1.14.6.1.2 | ColumnospfHostTOS | read-write | mandatory | The Type of Service of the route being configured. |
| 1.3.6.1.2.1.14.6.1.3 | ColumnospfHostMetric | read-write | mandatory | The Metric to be advertised. |
| 1.3.6.1.2.1.14.6.1.4 | ColumnospfHostStatus | read-write | mandatory | This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row re… |
| 1.3.6.1.2.1.14.7 | TableospfIfTable | not-accessible | mandatory | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.2.1.14.7.1 | RowospfIfEntry | not-accessible | mandatory | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.2.1.14.7.1.1 | ColumnospfIfIpAddress | read-write | mandatory | The IP address of this OSPF interface. |
| 1.3.6.1.2.1.14.7.1.2 | ColumnospfAddressLessIf | read-write | mandatory | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.2.1.14.7.1.3 | ColumnospfIfAreaId | read-write | mandatory | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.2.1.14.7.1.4 | ColumnospfIfType | read-write | mandatory | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.… |
| 1.3.6.1.2.1.14.7.1.5 | ColumnospfIfAdminStat | read-write | mandatory | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be a… |
| 1.3.6.1.2.1.14.7.1.6 | ColumnospfIfRtrPriority | read-write | mandatory | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.2.1.14.7.1.7 | ColumnospfIfTransitDelay | read-write | mandatory | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.2.1.14.7.1.8 | ColumnospfIfRetransInterval | read-write | mandatory | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.2.1.14.7.1.9 | ColumnospfIfHelloInterval | read-write | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.2.1.14.7.1.10 | ColumnospfIfRtrDeadInterval | read-write | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.2.1.14.7.1.11 | ColumnospfIfPollInterval | read-write | mandatory | The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor. |
| 1.3.6.1.2.1.14.7.1.12 | ColumnospfIfState | read-only | mandatory | The OSPF Interface State. |
| 1.3.6.1.2.1.14.7.1.13 | ColumnospfIfDesignatedRouter | read-only | mandatory | The IP Address of the Designated Router. |
| 1.3.6.1.2.1.14.7.1.14 | ColumnospfIfBackupDesignatedRouter | read-only | mandatory | The IP Address of the Backup Designated Router. |
| 1.3.6.1.2.1.14.7.1.15 | ColumnospfIfEvents | read-only | mandatory | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.2.1.14.7.1.16 | ColumnospfIfAuthKey | read-write | mandatory | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.2.1.14.8 | TableospfIfMetricTable | not-accessible | mandatory | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1.3.6.1.2.1.14.8.1 | RowospfIfMetricEntry | not-accessible | mandatory | A particular TOS metric for a non-virtual interface identified by the interface index. |
| 1.3.6.1.2.1.14.8.1.1 | ColumnospfIfMetricIpAddress | read-write | mandatory | The IP address of this OSPF interface. On row creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.8.1.2 | ColumnospfIfMetricAddressLessIf | read-write | mandatory | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the valu… |
| 1.3.6.1.2.1.14.8.1.3 | ColumnospfIfMetricTOS | read-write | mandatory | The type of service metric being referenced. On row creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.8.1.4 | ColumnospfIfMetricMetric | read-write | mandatory | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'n… |
| 1.3.6.1.2.1.14.8.1.5 | ColumnospfIfMetricStatus | read-write | mandatory | This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row re… |
| 1.3.6.1.2.1.14.9 | TableospfVirtIfTable | not-accessible | mandatory | Information about this router's virtual interfaces. |
| 1.3.6.1.2.1.14.9.1 | RowospfVirtIfEntry | not-accessible | mandatory | Information about a single Virtual Interface. |
| 1.3.6.1.2.1.14.9.1.1 | ColumnospfVirtIfAreaID | read-write | mandatory | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.2.1.14.9.1.2 | ColumnospfVirtIfNeighbor | read-write | mandatory | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.2.1.14.9.1.3 | ColumnospfVirtIfTransitDelay | read-write | mandatory | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.2.1.14.9.1.4 | ColumnospfVirtIfRetransInterval | read-write | mandatory | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.2.1.14.9.1.5 | ColumnospfVirtIfHelloInterval | read-write | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.2.1.14.9.1.6 | ColumnospfVirtIfRtrDeadInterval | read-write | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.2.1.14.9.1.7 | ColumnospfVirtIfState | read-only | mandatory | OSPF virtual interface states. |
| 1.3.6.1.2.1.14.9.1.8 | ColumnospfVirtIfEvents | read-only | mandatory | The number of state changes or error events on this Virtual Link |
| 1.3.6.1.2.1.14.9.1.9 | ColumnospfVirtIfAuthKey | read-write | mandatory | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length ze… |
| 1.3.6.1.2.1.14.9.1.10 | ColumnospfVirtIfStatus | read-write | mandatory | This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row re… |
| 1.3.6.1.2.1.14.10 | TableospfNbrTable | not-accessible | mandatory | A table of non-virtual neighbor information. |
| 1.3.6.1.2.1.14.10.1 | RowospfNbrEntry | not-accessible | mandatory | The information regarding a single neighbor. |
| 1.3.6.1.2.1.14.10.1.1 | ColumnospfNbrIpAddr | read-write | mandatory | The IP address of this neighbor. |
| 1.3.6.1.2.1.14.10.1.2 | ColumnospfNbrAddressLessIndex | read-write | mandatory | On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this c… |
| 1.3.6.1.2.1.14.10.1.3 | ColumnospfNbrRtrId | read-only | mandatory | A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.2.1.14.10.1.4 | ColumnospfNbrOptions | read-only | mandatory | A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a… |
| 1.3.6.1.2.1.14.10.1.5 | ColumnospfNbrPriority | read-write | mandatory | The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated rou… |
| 1.3.6.1.2.1.14.10.1.6 | ColumnospfNbrState | read-only | mandatory | The State of the relationship with this Neighbor. |
| 1.3.6.1.2.1.14.10.1.7 | ColumnospfNbrEvents | read-only | mandatory | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.2.1.14.10.1.8 | ColumnospfNbrLSRetransQLen | read-only | mandatory | The current length of the retransmission queue. |
| 1.3.6.1.2.1.14.10.1.9 | ColumnospfNBMANbrStatus | read-write | mandatory | This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row re… |
| 1.3.6.1.2.1.14.11 | TableospfVirtNbrTable | not-accessible | mandatory | A table of virtual neighbor information. |
| 1.3.6.1.2.1.14.11.1 | RowospfVirtNbrEntry | not-accessible | mandatory | Virtual neighbor information. |
| 1.3.6.1.2.1.14.11.1.1 | ColumnospfVirtNbrArea | read-only | mandatory | The Transit Area Identifier. |
| 1.3.6.1.2.1.14.11.1.2 | ColumnospfVirtNbrRtrId | read-only | mandatory | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.2.1.14.11.1.3 | ColumnospfVirtNbrIpAddr | read-only | mandatory | The IP address this Virtual Neighbor is using. |
| 1.3.6.1.2.1.14.11.1.4 | ColumnospfVirtNbrOptions | read-only | mandatory | A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics… |
| 1.3.6.1.2.1.14.11.1.5 | ColumnospfVirtNbrState | read-only | mandatory | The state of the Virtual Neighbor Relationship. |
| 1.3.6.1.2.1.14.11.1.6 | ColumnospfVirtNbrEvents | read-only | mandatory | The number of times this virtual link has changed its state, or an error has occurred. |
| 1.3.6.1.2.1.14.11.1.7 | ColumnospfVirtNbrLSRetransQLen | read-only | mandatory | The current length of the retransmission queue. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BigMetric | INTEGER (1..'FFFFFF'h) | ||
| DesignatedRouterPriority | INTEGER (0..'FF'h) | ||
| HelloRange | INTEGER (1..'FFFF'h) | ||
| InterfaceIndex | INTEGER | ||
| Metric | INTEGER (1..'FFFF'h) | ||
| PositiveInteger | INTEGER (1..'FFFFFFFF'h) | ||
| Status | INTEGER { enabled (1), disabled (2) } | ||
| TOSType | INTEGER (0..31) | ||
| TruthValue | INTEGER { true (1), false (2) } | ||
| UpToMaxAge | INTEGER (1..3600) | ||
| Validation | INTEGER { valid (1), invalid (2) } |