RFC1285-MIB
101 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| RFC1213-MIB | transmission |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.15 | Nodefddi | |||
| 1.3.6.1.2.1.10.15.1 | NodesnmpFddiSMT | |||
| 1.3.6.1.2.1.10.15.1.1 | ScalarsnmpFddiSMTNumber | read-only | mandatory | The number of SMT implementations (regardless of their current state) on this network management application entity. The value for this variable must remain co… |
| 1.3.6.1.2.1.10.15.1.2 | TablesnmpFddiSMTTable | not-accessible | mandatory | A list of SMT entries. The number of entries is given by the value of snmpFddiSMTNumber. |
| 1.3.6.1.2.1.10.15.1.2.1 | RowsnmpFddiSMTEntry | not-accessible | mandatory | An SMT entry containing information common to a given SMT. |
| 1.3.6.1.2.1.10.15.1.2.1.1 | ColumnsnmpFddiSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.2.1.10.15.1.2.1.2 | ColumnsnmpFddiSMTStationId | read-only | mandatory | Uniquely identifies an FDDI station. |
| 1.3.6.1.2.1.10.15.1.2.1.3 | ColumnsnmpFddiSMTOpVersionId | read-write | mandatory | The version that this station is using for its operation (refer to ANSI 7.1.2.2). |
| 1.3.6.1.2.1.10.15.1.2.1.4 | ColumnsnmpFddiSMTHiVersionId | read-only | mandatory | The highest version of SMT that this station supports (refer to ANSI 7.1.2.2). |
| 1.3.6.1.2.1.10.15.1.2.1.5 | ColumnsnmpFddiSMTLoVersionId | read-only | mandatory | The lowest version of SMT that this station supports (refer to ANSI 7.1.2.2). |
| 1.3.6.1.2.1.10.15.1.2.1.6 | ColumnsnmpFddiSMTMACCt | read-only | mandatory | The number of MACs in the station or concentrator. |
| 1.3.6.1.2.1.10.15.1.2.1.7 | ColumnsnmpFddiSMTNonMasterCt | read-only | mandatory | The number of Non Master PORTs (A, B, or S PORTs) in the station or concentrator. |
| 1.3.6.1.2.1.10.15.1.2.1.8 | ColumnsnmpFddiSMTMasterCt | read-only | mandatory | The number of Master PORTs in a node. If the node is not a concentrator, the value is zero. |
| 1.3.6.1.2.1.10.15.1.2.1.9 | ColumnsnmpFddiSMTPathsAvailable | read-only | mandatory | A value that indicates the PATH types available in the station. The value is a sum. This value initially takes the value zero, then for each type of PATH that … |
| 1.3.6.1.2.1.10.15.1.2.1.10 | ColumnsnmpFddiSMTConfigCapabilities | read-only | mandatory | A value that indicates capabilities that are present in the node. If 'holdAvailable' is present, this indicates support of the optional Hold Function (refer to… |
| 1.3.6.1.2.1.10.15.1.2.1.11 | ColumnsnmpFddiSMTConfigPolicy | read-write | mandatory | A value that indicates the configuration policies currently enforced in the node (refer to ANSI SMT 9.4.3.2). The 'configurationHold' policy refers to the Hold… |
| 1.3.6.1.2.1.10.15.1.2.1.12 | ColumnsnmpFddiSMTConnectionPolicy | read-write | mandatory | A value that indicates the connection policies enforced at the station. A station sets the corresponding policy for each of the connection types that it reject… |
| 1.3.6.1.2.1.10.15.1.2.1.13 | ColumnsnmpFddiSMTTNotify | read-write | mandatory | The timer used in the Neighbor Notification protocol, reported in seconds and ranging from 2 to 30 seconds (refer to ANSI SMT 8.3.1). |
| 1.3.6.1.2.1.10.15.1.2.1.14 | ColumnsnmpFddiSMTStatusReporting | read-only | mandatory | Indicates whether the node implements the Status Reporting Protocol. This object is included for compatibility with products that were designed prior to the ad… |
| 1.3.6.1.2.1.10.15.1.2.1.15 | ColumnsnmpFddiSMTECMState | read-only | mandatory | Indicates the current state of the ECM state machine (refer to ANSI SMT 9.5.2). |
| 1.3.6.1.2.1.10.15.1.2.1.16 | ColumnsnmpFddiSMTCFState | read-only | mandatory | The attachment configuration for the station or concentrator (refer to ANSI SMT 9.7.4.3). |
| 1.3.6.1.2.1.10.15.1.2.1.17 | ColumnsnmpFddiSMTHoldState | read-only | mandatory | This value indicates the current state of the Hold function. The values are determined as follows: 'holding-prm' is set if the primary ring is operational and … |
| 1.3.6.1.2.1.10.15.1.2.1.18 | ColumnsnmpFddiSMTRemoteDisconnectFlag | read-only | mandatory | A flag indicating that the station was remotely disconnected from the network. A station requires a Connect Action (SM_CM_CONNECT.request (Connect)) to rejoin … |
| 1.3.6.1.2.1.10.15.1.2.1.19 | ColumnsnmpFddiSMTStationAction | read-write | mandatory | This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Result… |
| 1.3.6.1.2.1.10.15.2 | NodesnmpFddiMAC | |||
| 1.3.6.1.2.1.10.15.2.1 | ScalarsnmpFddiMACNumber | read-only | mandatory | The total number of MAC implementations (across all SMTs) on this network management application entity. The value for this variable must remain constant at le… |
| 1.3.6.1.2.1.10.15.2.2 | TablesnmpFddiMACTable | not-accessible | mandatory | A list of MAC entries. The number of entries is given by the value of snmpFddiMACNumber. |
| 1.3.6.1.2.1.10.15.2.2.1 | RowsnmpFddiMACEntry | not-accessible | mandatory | A MAC entry containing information common to a given MAC. |
| 1.3.6.1.2.1.10.15.2.2.1.1 | ColumnsnmpFddiMACSMTIndex | read-only | mandatory | The value of the SMT index associated with this MAC. |
| 1.3.6.1.2.1.10.15.2.2.1.2 | ColumnsnmpFddiMACIndex | read-only | mandatory | A unique value for each MAC on the managed entity. The MAC identified by a particular value of this index is that identified by the same value of an ifIndex ob… |
| 1.3.6.1.2.1.10.15.2.2.1.3 | ColumnsnmpFddiMACFrameStatusCapabilities | read-only | mandatory | A value that indicates the MAC's bridge and end- station capabilities for operating in a bridged FDDI network. The value is a sum. This value initially takes t… |
| 1.3.6.1.2.1.10.15.2.2.1.4 | ColumnsnmpFddiMACTMaxGreatestLowerBound | read-write | mandatory | The greatest lower bound of T_Max supported for this MAC. |
| 1.3.6.1.2.1.10.15.2.2.1.5 | ColumnsnmpFddiMACTVXGreatestLowerBound | read-only | mandatory | The greatest lower bound of TVX supported for this MAC. |
| 1.3.6.1.2.1.10.15.2.2.1.6 | ColumnsnmpFddiMACPathsAvailable | read-only | mandatory | A value that indicates the PATH types available for this MAC. The value is a sum. This value initially takes the value zero, then for each type of PATH that th… |
| 1.3.6.1.2.1.10.15.2.2.1.7 | ColumnsnmpFddiMACCurrentPath | read-only | mandatory | Indicates the association of the MAC with a station PATH. |
| 1.3.6.1.2.1.10.15.2.2.1.8 | ColumnsnmpFddiMACUpstreamNbr | read-only | mandatory | The MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI SMT 7.2.1). The value… |
| 1.3.6.1.2.1.10.15.2.2.1.9 | ColumnsnmpFddiMACOldUpstreamNbr | read-only | mandatory | The previous value of the MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI… |
| 1.3.6.1.2.1.10.15.2.2.1.10 | ColumnsnmpFddiMACDupAddrTest | read-only | mandatory | The Duplicate Address Test flag, Dup_Addr_Test (refer to ANSI 8.3.1). |
| 1.3.6.1.2.1.10.15.2.2.1.11 | ColumnsnmpFddiMACPathsRequested | read-write | mandatory | A value that indicates PATH(s) desired for this MAC. The value is a sum which represents the individual PATHs that are desired. This value initially takes the … |
| 1.3.6.1.2.1.10.15.2.2.1.12 | ColumnsnmpFddiMACDownstreamPORTType | read-only | mandatory | Indicates the PC-Type of the first port that is downstream of this MAC (the exit port). |
| 1.3.6.1.2.1.10.15.2.2.1.13 | ColumnsnmpFddiMACSMTAddress | read-only | mandatory | The 48 bit individual address of the MAC used for SMT frames. |
| 1.3.6.1.2.1.10.15.2.2.1.14 | ColumnsnmpFddiMACTReq | read-write | mandatory | The value of T-Req (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2). |
| 1.3.6.1.2.1.10.15.2.2.1.15 | ColumnsnmpFddiMACTNeg | read-only | mandatory | The value of T-Neg (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2). |
| 1.3.6.1.2.1.10.15.2.2.1.16 | ColumnsnmpFddiMACTMax | read-only | mandatory | The value of T-Max (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2). |
| 1.3.6.1.2.1.10.15.2.2.1.17 | ColumnsnmpFddiMACTvxValue | read-only | mandatory | The value of TvxValue (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2). |
| 1.3.6.1.2.1.10.15.2.2.1.18 | ColumnsnmpFddiMACTMin | read-only | mandatory | The value of T-Min (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2). |
| 1.3.6.1.2.1.10.15.2.2.1.19 | ColumnsnmpFddiMACCurrentFrameStatus | read-write | mandatory | A value that indicates the MAC's operational frame status setting functionality. The value is a sum. This value initially takes the value zero, then for each f… |
| 1.3.6.1.2.1.10.15.2.2.1.20 | ColumnsnmpFddiMACFrameCts | read-only | mandatory | Frame_Ct (refer to ANSI MAC 2.2.1). |
| 1.3.6.1.2.1.10.15.2.2.1.21 | ColumnsnmpFddiMACErrorCts | read-only | mandatory | Error_Ct (refer to ANSI MAC 2.2.1). |
| 1.3.6.1.2.1.10.15.2.2.1.22 | ColumnsnmpFddiMACLostCts | read-only | mandatory | Lost_Ct (refer to ANSI MAC 2.2.1). |
| 1.3.6.1.2.1.10.15.2.2.1.23 | ColumnsnmpFddiMACFrameErrorThreshold | read-only | mandatory | A threshold for determining when a MAC Condition report should be generated. The condition is true when the ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMA… |
| 1.3.6.1.2.1.10.15.2.2.1.24 | ColumnsnmpFddiMACFrameErrorRatio | read-only | mandatory | This attribute is the actual ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt + delta snmpFddiMACLostCt)) x 2**16. |
| 1.3.6.1.2.1.10.15.2.2.1.25 | ColumnsnmpFddiMACRMTState | read-only | mandatory | Indicates the current state of the Ring Management state machine (refer to ANSI Section 10). |
| 1.3.6.1.2.1.10.15.2.2.1.26 | ColumnsnmpFddiMACDaFlag | read-only | mandatory | The RMT flag Duplicate Address Flag, DA_Flag (refer to ANSI 10.3.1.2). |
| 1.3.6.1.2.1.10.15.2.2.1.27 | ColumnsnmpFddiMACUnaDaFlag | read-only | mandatory | A flag set when the upstream neighbor reports a duplicate address condition. Reset when the condition clears. |
| 1.3.6.1.2.1.10.15.2.2.1.28 | ColumnsnmpFddiMACFrameCondition | read-only | mandatory | Indicates the MAC Condition is active when set. Cleared when the condition clears and on power up. |
| 1.3.6.1.2.1.10.15.2.2.1.30 | ColumnsnmpFddiMACAction | read-write | mandatory | This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Result… |
| 1.3.6.1.2.1.10.15.3 | NodesnmpFddiPATH | |||
| 1.3.6.1.2.1.10.15.4 | NodesnmpFddiPORT | |||
| 1.3.6.1.2.1.10.15.4.1 | ScalarsnmpFddiPORTNumber | read-only | mandatory | The total number of PORT implementations (across all SMTs) on this network management application entity. The value for this variable must remain constant at l… |
| 1.3.6.1.2.1.10.15.4.2 | TablesnmpFddiPORTTable | not-accessible | mandatory | A list of PORT entries. The number of entries is given by the value of snmpFddiPORTNumber. |
| 1.3.6.1.2.1.10.15.4.2.1 | RowsnmpFddiPORTEntry | not-accessible | mandatory | A PORT entry containing information common to a given PORT. |
| 1.3.6.1.2.1.10.15.4.2.1.1 | ColumnsnmpFddiPORTSMTIndex | read-only | mandatory | The value of the SMT index associated with this PORT. |
| 1.3.6.1.2.1.10.15.4.2.1.2 | ColumnsnmpFddiPORTIndex | read-only | mandatory | A unique value for each PORT within a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt { snmpFddiSMTEntry 6 } and snmp… |
| 1.3.6.1.2.1.10.15.4.2.1.3 | ColumnsnmpFddiPORTPCType | read-only | mandatory | PC_Type (refer to ANSI SMT 9.2.2 and ANSI SMT 9.6.3.2). |
| 1.3.6.1.2.1.10.15.4.2.1.4 | ColumnsnmpFddiPORTPCNeighbor | read-only | mandatory | The type (PC_Neighbor) of the remote PORT that is determined in PC_Signaling in R_Val (1,2) (refer to ANSI SMT 9.6.3.2). |
| 1.3.6.1.2.1.10.15.4.2.1.5 | ColumnsnmpFddiPORTConnectionPolicies | read-write | mandatory | A value that indicates the node's PORT policies. Pc-MAC-LCT, Pc-MAC-Loop, and Pc-MAC-Placement indicate how the respective PC Signaling Capability flags should… |
| 1.3.6.1.2.1.10.15.4.2.1.6 | ColumnsnmpFddiPORTRemoteMACIndicated | read-only | mandatory | The indication, in PC-Signaling that the remote partner intends to place a MAC in the output token PATH of this PORT. Signaled as R_Val (9) (refer to ANSI SMT … |
| 1.3.6.1.2.1.10.15.4.2.1.7 | ColumnsnmpFddiPORTCEState | read-only | mandatory | Indicates the current state of PORT's Configuration Element (CE) (refer to ANSI 9.7.5). Note that this value represents the Current Path information for this P… |
| 1.3.6.1.2.1.10.15.4.2.1.8 | ColumnsnmpFddiPORTPathsRequested | read-write | mandatory | A value that indicates the desired association(s) of the port with a station PATH. The 'Primary' Path is the default. The value of 'Secondary' is only meaningf… |
| 1.3.6.1.2.1.10.15.4.2.1.9 | ColumnsnmpFddiPORTMACPlacement | read-only | mandatory | Indicates the upstream MAC, if any, that is associated with the PORT. The value shall be zero if there is no MAC associated with the PORT. Otherwise, the value… |
| 1.3.6.1.2.1.10.15.4.2.1.10 | ColumnsnmpFddiPORTAvailablePaths | read-only | mandatory | A value that indicates the PATH types available for M and S PORTs. The value is a sum. This value initially takes the value zero, then for each type of PATH th… |
| 1.3.6.1.2.1.10.15.4.2.1.11 | ColumnsnmpFddiPORTMACLoopTime | read-write | mandatory | Time for the optional MAC Local Loop, T_Next(9), which is greater-than or equal-to 200 milliseconds (refer to ANSI SMT 9.4.4.2.3). |
| 1.3.6.1.2.1.10.15.4.2.1.12 | ColumnsnmpFddiPORTTBMax | read-write | mandatory | TB_Max (refer to ANSI SMT 9.4.4.2.1). |
| 1.3.6.1.2.1.10.15.4.2.1.13 | ColumnsnmpFddiPORTBSFlag | read-only | mandatory | The Break State, BS_Flag (refer to ANSI SMT 9.4.3.4). |
| 1.3.6.1.2.1.10.15.4.2.1.14 | ColumnsnmpFddiPORTLCTFailCts | read-only | mandatory | The count of the consecutive times the link confidence test (LCT) has failed during connection management (refer to ANSI 9.4.1). |
| 1.3.6.1.2.1.10.15.4.2.1.15 | ColumnsnmpFddiPORTLerEstimate | read-only | mandatory | A long term average link error rate. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate. |
| 1.3.6.1.2.1.10.15.4.2.1.16 | ColumnsnmpFddiPORTLemRejectCts | read-only | mandatory | A link error monitoring count of the times that a link has been rejected. |
| 1.3.6.1.2.1.10.15.4.2.1.17 | ColumnsnmpFddiPORTLemCts | read-only | mandatory | The aggregate link error monitor error count, set to zero only on station power_up. |
| 1.3.6.1.2.1.10.15.4.2.1.18 | ColumnsnmpFddiPORTLerCutoff | read-write | mandatory | The link error rate estimate at which a link connection will be broken. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent. |
| 1.3.6.1.2.1.10.15.4.2.1.19 | ColumnsnmpFddiPORTLerAlarm | read-write | mandatory | The link error rate estimate at which a link connection will generate an alarm. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the e… |
| 1.3.6.1.2.1.10.15.4.2.1.20 | ColumnsnmpFddiPORTConnectState | read-only | mandatory | An indication of the connect state of this PORT. Basically, this gives a higher level view of the state of the connection by grouping PCM states and the PC-Wit… |
| 1.3.6.1.2.1.10.15.4.2.1.21 | ColumnsnmpFddiPORTPCMState | read-only | mandatory | (refer to SMT 9.6.2). |
| 1.3.6.1.2.1.10.15.4.2.1.22 | ColumnsnmpFddiPORTPCWithhold | read-only | mandatory | PC_Withhold, (refer to ANSI SMT 9.4.1). |
| 1.3.6.1.2.1.10.15.4.2.1.23 | ColumnsnmpFddiPORTLerCondition | read-only | mandatory | This variable is set to true whenever LerEstimate is less than or equal to LerAlarm. |
| 1.3.6.1.2.1.10.15.4.2.1.25 | ColumnsnmpFddiPORTAction | read-write | mandatory | This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Result… |
| 1.3.6.1.2.1.10.15.5 | NodesnmpFddiATTACHMENT | |||
| 1.3.6.1.2.1.10.15.5.1 | ScalarsnmpFddiATTACHMENTNumber | read-only | mandatory | The total number of attachments (across all SMTs) on this network management application entity. The value for this variable must remain constant at least from… |
| 1.3.6.1.2.1.10.15.5.2 | TablesnmpFddiATTACHMENTTable | not-accessible | mandatory | A list of ATTACHMENT entries. The number of entries is given by the value of snmpFddiATTACHMENTNumber. |
| 1.3.6.1.2.1.10.15.5.2.1 | RowsnmpFddiATTACHMENTEntry | not-accessible | mandatory | An ATTACHMENT entry containing information common to a given set of ATTACHMENTs. The ATTACHMENT Resource represents a PORT or a pair of PORTs plus the optional… |
| 1.3.6.1.2.1.10.15.5.2.1.1 | ColumnsnmpFddiATTACHMENTSMTIndex | read-only | mandatory | The value of the SMT index associated with this ATTACHMENT. |
| 1.3.6.1.2.1.10.15.5.2.1.2 | ColumnsnmpFddiATTACHMENTIndex | read-only | mandatory | A unique value for each ATTACHMENT on a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt { snmpFddiSMTEntry 6 } and sn… |
| 1.3.6.1.2.1.10.15.5.2.1.3 | ColumnsnmpFddiATTACHMENTClass | read-only | mandatory | The Attachment class. This represents a PORT or a pair of PORTs plus the associated optional optical bypass that are managed as a functional unit. The PORT ass… |
| 1.3.6.1.2.1.10.15.5.2.1.4 | ColumnsnmpFddiATTACHMENTOpticalBypassPresent | read-only | mandatory | The value of this value is false for 'single- attachment' and { snmpFddiATTACHMENT 11 }. Correct operation of CMT for single-attachment and concentrator attach… |
| 1.3.6.1.2.1.10.15.5.2.1.5 | ColumnsnmpFddiATTACHMENTIMaxExpiration | read-only | mandatory | I_Max (refer to ANSI SMT 9.4.4.2.1). It is recognized that some currently deployed systems do not implement an optical bypass. Systems which do not implement o… |
| 1.3.6.1.2.1.10.15.5.2.1.6 | ColumnsnmpFddiATTACHMENTInsertedStatus | read-only | mandatory | Indicates whether the attachment is currently inserted in the node. |
| 1.3.6.1.2.1.10.15.5.2.1.7 | ColumnsnmpFddiATTACHMENTInsertPolicy | read-write | mandatory | Indicates the Insert Policy for this Attachment. Insert: True (1), Don't Insert: False (2), Unimplemented (3) |
| 1.3.6.1.2.1.10.15.6 | NodesnmpFddiChipSets | |||
| 1.3.6.1.2.1.10.15.6.1 | NodesnmpFddiPHYChipSets | |||
| 1.3.6.1.2.1.10.15.6.2 | NodesnmpFddiMACChipSets | |||
| 1.3.6.1.2.1.10.15.6.3 | NodesnmpFddiPHYMACChipSets |